CHANGELOG.md

HEAD

8.0.4

• Any 404 when trying to delete an application will be considered duplicate (#210)

8.0.3

• Add support for Ruby 3.2 and 3.3 (#203 and #208)

8.0.2

• Bugfix: Allow nested deploy blocks with new teardown logic (#201)

8.0.1

• Bugfix: Lock and sleep and refresh API when duplicate app deletion detected (#198)

8.0.0

• Breaking change: Delete apps on teardown. Previously hatchet would delete apps lazily to help with debugging. This behavior allowed developers to inspect logs and heroku run bash in the event of an unexpected failure. In practice, it is rarely needed and causes accounts to retain apps indefinitely. Previously there was no cost to retaining applications, but now basic applications incur a charge. Change details:
  • The application teardown process now deletes applications directly.
  • To skip destroying applications on teardown, set HEROKU_DEBUG_EXPENSIVE=1. This env var will cause App#teardown! to skip deletion so you can introspect why one failed.
  • When hatchet needs a new application, it will first delete all applications that are created at least HATCHET_ALIVE_TTL_MINUTES ago. If it cannot delete any applications and the account is already at HATCHET_APP_LIMIT, it will sleep and try again later.
  • Introduce --older-than flag to hatchet destroy CLI command. For example, the command hatchet destroy --older-than=7will remove any apps older than the provided value (in minutes).
• Add support for GitHub Actions env vars (#189)

7.4.0

• Supports "basic" scaledown (#193)
• Breaking: Support for Ruby 2.2 is soft removed going forward only Ruby versions on the currently released stack will be supported
• Bugfix: heroku run calls are now properly rate throttled and retried #187

7.3.4

• Memoize Hatchet::App.default_buildpack (#183)
• Fix repository path lookup when custom Hatchet directory set (#181)
• Handle additional variations of rate limit error messages (#182)
• Add HATCHET_DEFAULT_STACK for configuring the default stack (#184)
• Fix typo in the reaper "Duplicate destroy attempted" message (#175)
• Set init.defaultBranch in ci:setup to suppress git init warning in Git 2.30+ (#172)
• Switch heroku ci:install_heroku to the Heroku CLI standalone installer rather than the APT install method (#171)

7.3.3

• Quiet personal tokens (#148)

7.3.2

• Fix App#in_directory_fork not receiving debugging output when an error is raised (#146)
• Do not create CI tarball inside cwd to prevent tar "file changed as we read it" warnings.

7.3.1

• Fix Ruby incompatibility introduced by using &. and rescue without begin/end without a required_ruby_version in hatchet.gemspec. (#139)

7.3.0

• Deprecations

  • Deprecation: Calling App#before_deploy as a way to clear/replace the existing block should now be done with App#before_deploy(:replace) (#126)
  • Deprecation: HATCHET_BUILDPACK_BASE default (#133)
  • Deprecation: App#directory (#135)

• Flappy test improvements

  • Increase CI timeout limit to 900 seconds (15 minutes) (#137)
  • Empty string returns from App#run now trigger retries (#132)
  • Rescue 403 on pipeline delete (#130)
  • Additional rate throttle cases handled (#128)

• Usability

  • Annotate rspec expectation failures inside of deploy blocks with hatchet debug information (#136)
  • Hatchet#new raises a helpful error when no source code location is provided (#134)
  • Lazy evaluation of HATCHET_BUILDPACK_BASE env var (#133)
  • Allow multiple App#before_deploy blocks to be set and called (#126)
  • Performance improvement when running without an explicit HEROKU_API_KEY set (#128)

7.2.0

• App#setup! no longer modifies files on disk. (#125)
• Add $ hatchet init command for bootstrapping new projects (#123)

7.1.3

• Important!! Fix branch name detection on CircleCI (#124)

7.1.2

• Fix support for Hatchet deploying the 'main' branch (#122)

7.1.1

• Fix destroy_all functionality (#121)

7.1.0

• Initializing an App can now take a retries key to overload the global hatchet env var (#119)
• Calling App#commit! now adds an empty commit if there is no changes on disk (#119)
• Bugfix: Failed release phase in deploys can now be re-run (#119)
• Bugfix: Allow hatchet lock to be run against new projects (#118)
• Bugfix: Allow hatchet.lock file to lock a repo to a different branch than what is specified as default for GitHub (#118)

7.0.0

• ActiveSupport's Object#blank? and Object#present? are no longer provided by default (#107)
• Remove deprecated support for passing a block to App#run (#105)
• Ignore 403 on app delete due to race condition (#101)
• The hatchet.lock file can now be locked to "main" in addition to "master" (#86)
• Allow concurrent one-off dyno runs with the run_multi: true flag on apps (#94)
• Apps are now marked as being "finished" by enabling maintenance mode on them when teardown! is called. Finished apps can be reaped immediately (#97)
• Applications that are not marked as "finished" will be allowed to live for a HATCHET_ALIVE_TTL_MINUTES duration before they're deleted by the reaper to protect against deleting an app mid-deploy, default is seven minutes (#97)
• The HEROKU_APP_LIMIT env var no longer does anything, instead hatchet application reaping is manually executed if an app cannot be created (#97)
• App#deploy without a block will no longer run teardown! automatically (#97)
• Calls to git push heroku are now rate throttled (#98)
• Calls to app.run are now rate throttled (#99)
• Deployment now raises and error when the release failed (#93)

6.0.0

• Rate throttling is now provided directly by platform-api (#82)

5.0.3

• Allow repos to be "locked" to master instead of a specific commit (#80)

5.0.2

• Fix before_deploy use with ci test runs (#78)

5.0.1

• Circle CI support in ci:setup command (#76)

5.0.0

• Shelling out to heroku commands no longer uses Bundler.with_clean_env (#74)
• CI runs can now happen multiple times against the same app/pipeline (#75)
• Breaking change: Do not allow App#run to escape to system shell by default (#72)

Note: If you were relying on this behavior, use the raw: true option.

• ReplRunner use with App#run is now deprecated (#72)
• Calling App#run with a nil in the second argument is now deprecated (#72)

4.1.2

• Hatchet::App.default_buildpack is aliased to :default symbol while passing in buildpacks as an array to Hatchet::App (#73)

4.1.1

• Fix branch resolution on Travis when a pull-request is tested (#70)

4.1.0

• Fix CI 403 errors caused by Heroku auto deleting pipelines that do not have an app attached (#68)
• CI runs now default to heroku-18 this is a breaking change (#68)

4.0.13

• Introduce App#in_directory_fork for safe execution of code that might mutate the process env vars (#65)

4.0.12

• Fix deadlock when a single process kills the same app twice (#63)
• Add ability to debug deadlock with HATCHET_DEBUG_DEADLOCK env var.

4.0.11

• Fix logic in rake task (#62)

4.0.10

• Fix syntax in rake task (#61)

4.0.9

• Allow overriding of all App#run options, including option removal (by passing Hatchet::App::SkipDefaultOption as the value)

4.0.8

• Fix hatchet destroy calling class from wrong module
• Fix hatchet destroy not passing rate limited API to Reaper
• Fix undeclared variable in App#create_app rescue block
• Fix race condition in Reaper#cycle triggering 403s in API, causing test failures
• Allow configurable app name prefix (default "hatchet-t-") via HATCHET_APP_PREFIX env var

4.0.7

• Exit code is now returned from app.run commands (#58)
• ci_setup.rb no longer emits an error when run on sh (#57)

4.0.6

• Setup script hatchet ci:setup added (#55)

4.0.5

• Allow for using locally checked in repo and skip the hatchet.lock dance (#53)

4.0.4 - release not found

• Allow setting config when object is initialized (#52)

4.0.3

• Introduce explicit before_deploy block that is called, well...before deploy happens. If any changes are made to disk at this time then contents are committed to disk (#51)
• Allow running deploy block inside of an in_directory block (#51)
• Introduce Hatchet::App#commit! that will commit any files to a repo in the current directory. (#51)

4.0.2

• Support for running Hatchet tests on Heroku CI by defaulting to ENV['HEROKU_TEST_RUN_BRANCH'] (#48)

4.0.1

• Rate limit Heroku CI

4.0.0

• Introduce API rate limiting (#46)
• Deprecate App#platform_api method (#46)

3.1.1

• Better errors when no lockfile is found #43

3.1.0

• Introduce a lockfile #42

3.0.6

• Fix double delete error #41

3.0.5

• Require mktmpdir in the right place.

3.0.4

• Remove Heroku constants

3.0.2

• SSH no longer needed for travis setup
• Remove Heroku.rb dependency

3.0.2

• Use https for git clones

3.0.1

• Can pass in multiple buildpacks to constructor
• app#update_stack() added
• Can pass stack into constructor
• Added Hatchet::App.default_buildpack

3.0.0

• Use v3 of the Heroku API because Heroku is deprecating v2

2.0.3

• Fix CI support to include multi nodes of output.

2.0.2

• Do not require super user access

2.0.1

• Use actual email address instead of example

2.0.0

• Support for Heroku CI added
• Removed support for Anvil

1.4.1

• Shell commands now escaped automatically

1.4.0

• The App#setup! method now automatically tries to reap unused apps if the request fails.
• Default app deploy type is now :git

1.3.7

• Return self from setup!

1.3.6

• Re-push of 1.3.5 with actual commits.

1.3.5

• Ensure travis box has an SSH key

1.3.4

• Ignore when we try to delete an app that does not exist

1.3.3

• Apps are lazily reaped for easier debugging
• Verbose output by default for easier debugging

1.3.2 (02-18-2014)

• App#run interface now matches ReplRunner

1.3.1

• Fix dependencies

1.3.0

• hatchet install now clones and pulls in parallel threads
• rake travis:setup now ensures a git email and name is set

1.2.1

• Remove debug puts

1.2.0

• Change App#push default behavior to be App#push_with_retry!
• App#in_directory now copies source repo to tmpdir so it can be modified if needed
• Repo name now shows up in error outputs.

1.1.9

• Use TRAVIS_BRANCH if present

1.1.8

• Do not check git branch unless using GitApp

1.1.7

• Add labs methods App#set_labs! and App.new(labs: "websockets")

1.1.6

• App#setup! is now idempotent
• Added App#get_config
• Added App#set_config

1.1.5

• Add App#in_directory to public API

1.1.4

• Bugfix: Eliminate race condition around running multiple travis builds at the same time

1.1.3

• Bugfix: use clean bundler env when setting up travis.

1.1.2

• Bugfix: test setup on travis now works correctly

1.1.1

• Ensure external commands run inside of bundle_exec block are run with proper environment variables set.

1.1.0

• Added Hatchet::Runner which can dynamically swap the backend (anvil/git) depending on the value of ENV['HATCHET_DEPLOY_STRATEGY'] you can use 'anvil' or 'git'.

1.0.0

• Move remote console running code to https://github.com/schneems/repl_runner This changes the API for running interactive code. README has been updated

0.2.0

• Add database method App#add_database

• Drastically improved reliability of app.run outputs.

• Add rake hatchet:teardown_travis task to put in travis.yml:

  after_script: bundle exec rake hatchet:teardown_travis

0.1.1

• Allow auto retries of pushes by setting environment variable HATCHET_RETRIES=3

0.1.0

• Failed deploys now raise an exception, to ignore set allow_failure: true in the Hatchet::App

0.0.2

• Added ability to run inline commands with no block (such as app.run('ruby -v'))

0.0.1

• Initial Release