BuildFedoraPROJ8

Prev (Linux Mint 20.1) | Home | Manual | Index | (OSX) Next

---

Table of contents

• Compile and build QMapShack with PROJ 8 for Fedora 33
  • Install needed packages
  • Install PROJ version 8
  • Install GDAL
  • Install QUAZIP
  • Install Routino
  • Install QMapShack
  • Run QMapShack

---

Compile and build QMapShack with PROJ 8 for Fedora 33

QMapShack versions beyond version 1.15.2 will use PROJ version 8. This requires some changes in the QMS build procedure. This page is an early release of the description of these changes. It can be used to build current QMS development versions.

Preliminary remark: The described installation procedure is based on an X11 display server. Switching from a Wayland display server (the default on Fedora 33) can be done during the login process (lower right gear on the login screen).

Warnings and hints:

• GDAL version 3.x now depends on PROJ. Therefore, don't change the described installation sequence of packages.
• If there are older versions of the used libraries on your system, remove them completely first.
• Don't change the advised directory settings.

Install needed packages

1. Run

    sudo dnf upgrade
    
    sudo dnf groupinstall "Development Tools" "Development Libraries"
    
    sudo dnf install qt5-linguist qt5-qttools-static qt5-qtwebengine-devel libjpeg-turbo-devel alglib-devel gdal-devel libtiff-devel libsq3-devel qt-creator
    
    mkdir ~/GPS
   

Install PROJ version 8

1. Assume, that the current PROJ release is 8.0.0 (otherwise change the version number in the following lines!)

2. Download

    cd ~/GPS
    wget https://download.osgeo.org/proj/proj-8.0.0.tar.gz
    tar xzvf proj-8.0.0.tar.gz
   
    cd proj-8.0.0
    mkdir build
    cd build
   

3. Build and install

    ccmake .. -DCMAKE_INSTALL_PREFIX=/usr
   

   If the ccmake run stops, press c (maybe, several times) and then g.

    cmake --build . -j2
    sudo cmake --build . --target install
   

Note: The parameter j2 defines the number of simultaneously running jobs when building the code. You can increase this parameter to the value of the optimal compilation speed depending on your CPU (-j3, -j4, ...).

Install GDAL

Note: Please be patient. The building process will take some time. Depending on your hardware settings it may take 1-2 hours.

1. Download

    cd ~/GPS
    wget https://github.com/OSGeo/gdal/releases/download/v3.2.2/gdal-3.2.2.tar.gz
    tar xvzf gdal-3.2.2.tar.gz
    cd gdal-3.2.2
   

2. Build and install

    ./configure --prefix=/usr
    make -j2
    sudo make install
   

Install QUAZIP

1. Assume, that the current QUAZIP release is 1.1 (otherwise change the version number in the following lines!)

2. Download

    cd ~/GPS
    wget https://github.com/stachenov/quazip/archive/refs/tags/v1.1.tar.gz
    tar xvzf v1.1.tar.gz
   
    cd quazip-1.1
    mkdir build
    cd build
   

3. Build and install

    ccmake .. -DCMAKE_INSTALL_PREFIX=/usr
   

   If the ccmake run stops, press c (maybe, several times) and then g.

    cmake --build . -j2
    sudo cmake --build . --target install
   

Install Routino

1. Download

    cd ~/GPS
    svn co http://routino.org/svn/trunk routino
    cd routino
   

2. Edit Makefile.conf:

   1. Line 48: set to prefix=/usr
   2. Line 51: set to `libdir=$(prefix)/lib64

3. Build and install

    make -j2
    sudo make install
   

Install QMapShack

1. Download

    cd ~/GPS
    git clone https://github.com/Maproom/qmapshack.git QMapShack
    mkdir build_QMapShack
    cd build_QMapShack
   

2. Build and install

    ccmake ../QMapShack -DCMAKE_INSTALL_PREFIX=/usr
   

   If the ccmake run stops, press c (maybe, several times) and then g

3. Run

    make -j2
    sudo make install
   

Run QMapShack

1. Run

    qmapshack
   

---

Prev (Linux Mint 20.1) | Home | Manual | Index | Top | (OSX) Next