Skip to content

bitfield_distribution: fix subsystem clogged at begining of a session #9094

New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom
Merged
alexggh merged 4 commits into from
Jul 10, 2025
Merged

bitfield_distribution: fix subsystem clogged at begining of a session #9094

alexggh merged 4 commits into from
Jul 10, 2025

Conversation

@alexggh
Copy link
Contributor

@alexggh alexggh commented Jul 3, 2025

handle_peer_view_change gets called on NewGossipTopology with the existing view of the peer to cover for the case when the topology might arrive late, but in that case in the view will contain old blocks from previous session, so since the X/Y neighbour change because of the topology change you end up sending a lot of messages for blocks before the session changed.

Fix it by checking the send message only for relay chains that are in the same session as the current topology.

@alexggh alexggh requested review from AndreiEres, ordian and sandreim July 3, 2025 15:20
@burdges
Copy link

burdges commented Jul 3, 2025

"the topology might arrive late" ?

@alexggh
Copy link
Contributor Author

alexggh commented Jul 4, 2025

"the topology might arrive late" ?

I'm talking about this message

polkadot-sdk/polkadot/node/network/bitfield-distribution/src/lib.rs

Line 682 in 3bd01b9

NetworkBridgeEvent::NewGossipTopology(gossip_topology) => {
, which gets emitted at the first block of a session, by a different subsystem.

And then we call this function here:

polkadot-sdk/polkadot/node/network/bitfield-distribution/src/lib.rs

Line 719 in 3bd01b9

handle_peer_view_change(ctx, state, new_peer, old_view, rng).await;
, to send messages to the peers according to the topology.

But given that bitfields gets brodcasted only 1.5s after the block the only case that code would be doing something good is if this subsystem receives the topology 1.5 after the block, which probably will never happen. Of course this code does something wrong like sending messages to peers for older than the current block.

sandreim
sandreim approved these changes Jul 4, 2025
View reviewed changes
Copy link
Contributor

@sandreim sandreim left a comment

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

🚀

@alexggh
Copy link
Contributor Author

alexggh commented Jul 7, 2025

/cmd prdoc --audience node_dev --bump patch

@alexggh alexggh added A4-backport-stable2503 Pull request must be backported to the stable2503 release branch A4-backport-stable2506 Pull request must be backported to the stable2506 release branch labels Jul 8, 2025
@alexggh alexggh enabled auto-merge July 10, 2025 09:24
@alexggh alexggh added this pull request to the merge queue Jul 10, 2025
Merged via the queue into master with commit 12ddb5a Jul 10, 2025
250 of 251 checks passed
@alexggh alexggh deleted the alexggh/fix_bitfield_subsytem branch July 10, 2025 10:35
paritytech-release-backport-bot bot pushed a commit that referenced this pull request Jul 10, 2025
@alexggh @github-actions
bitfield_distribution: fix subsystem clogged at begining of a session (…
5134e60 
…#9094)

`handle_peer_view_change` gets called on NewGossipTopology with the
existing view of the peer to cover for the case when the topology might
arrive late, but in that case in the view will contain old blocks from
previous session, so since the X/Y neighbour change because of the
topology change you end up sending a lot of messages for blocks before
the session changed.

Fix it by checking the send message only for relay chains that are in
the same session as the current topology.

---------

Signed-off-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: cmd[bot] <41898282+github-actions[bot]@users.noreply.github.com>
(cherry picked from commit 12ddb5a)
@paritytech-release-backport-bot
Copy link

paritytech-release-backport-bot bot commented Jul 10, 2025

Successfully created backport PR for stable2503:

@paritytech-release-backport-bot paritytech-release-backport-bot bot mentioned this pull request Jul 10, 2025
Merged
paritytech-release-backport-bot bot pushed a commit that referenced this pull request Jul 10, 2025
@alexggh @github-actions
bitfield_distribution: fix subsystem clogged at begining of a session (…
8368cb4 
…#9094)

`handle_peer_view_change` gets called on NewGossipTopology with the
existing view of the peer to cover for the case when the topology might
arrive late, but in that case in the view will contain old blocks from
previous session, so since the X/Y neighbour change because of the
topology change you end up sending a lot of messages for blocks before
the session changed.

Fix it by checking the send message only for relay chains that are in
the same session as the current topology.

---------

Signed-off-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: cmd[bot] <41898282+github-actions[bot]@users.noreply.github.com>
(cherry picked from commit 12ddb5a)
@paritytech-release-backport-bot
Copy link

paritytech-release-backport-bot bot commented Jul 10, 2025

Successfully created backport PR for stable2506:

@paritytech-release-backport-bot paritytech-release-backport-bot bot mentioned this pull request Jul 10, 2025
Merged
alexggh added a commit that referenced this pull request Jul 10, 2025
@paritytech-release-backport-bot @alexggh @github-actions
[stable2506] Backport #9094 (#9156)
c3bfa7a 
Backport #9094 into `stable2506` from alexggh.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Signed-off-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: cmd[bot] <41898282+github-actions[bot]@users.noreply.github.com>
EgorPopelyaev pushed a commit that referenced this pull request Jul 30, 2025
@paritytech-release-backport-bot @alexggh @github-actions
[stable2503] Backport #9094 (#9155)
536ac17 
Backport #9094 into `stable2503` from alexggh.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Signed-off-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: cmd[bot] <41898282+github-actions[bot]@users.noreply.github.com>
alstjd0921 added a commit to bifrost-platform/polkadot-sdk that referenced this pull request Aug 14, 2025
@alstjd0921 @paritytech-release-backport-bot
@Overkillus @sw10pa @ordian @EgorPopelyaev @iulianbarbu @alexggh @sandreim @github-actions @tdimitrov @pepoviola @lexnv @karolk91 @AndreiEres @ggwpez @athei @bkchr @tmpolaczyk @bkontur @alvicsam @franciscoaguirre @TDemeco @gui1117 @acatangiu @Morganamilo @alindima @jasl @skunert @dependabot @gpestana @s0me0ne-unkn0wn @seadanda @joepetrowski @liamaharon @kianenigma @dnjscksdn98 @paritytech-cmd-bot-polkadot-sdk @bgallois @gotnoshoeson @shawntabrizi @drewstone @Ank4n @Dinonard @eskimor @Doordashcon @cl0w5 @serban300
bifrost-polkadot-stable2503 (#3)
f8d3b78 
* [stable2503] Backport paritytech#6827 (paritytech#8770)

Backport paritytech#6827 into `stable2503` from Overkillus.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: Maciej <[email protected]>
Co-authored-by: ordian <[email protected]>
Co-authored-by: Stephane Gurgenidze <[email protected]>
Co-authored-by: ordian <[email protected]>
Co-authored-by: Egor_P <[email protected]>

* [stable2503] Backport paritytech#8861 (paritytech#8867)

Backport paritytech#8861 into `stable2503` from ordian.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: ordian <[email protected]>

* [stable2503] Backport paritytech#8755 (paritytech#8814)

Backport paritytech#8755 into `stable2503` from iulianbarbu.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Signed-off-by: Iulian Barbu <[email protected]>
Co-authored-by: Iulian Barbu <[email protected]>
Co-authored-by: Egor_P <[email protected]>

* [stable2503] Backport paritytech#8832 (paritytech#8846)

Backport paritytech#8832 into `stable2503` from alexggh.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Signed-off-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Andrei Sandu <[email protected]>
Co-authored-by: cmd[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: Egor_P <[email protected]>

* [stable2503] Backport paritytech#8837 (paritytech#8884)

Backport paritytech#8837 into `stable2503` from tdimitrov.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: Tsvetomir Dimitrov <[email protected]>
Co-authored-by: Javier Viola <[email protected]>
Co-authored-by: Egor_P <[email protected]>

* [stable2503] Backport paritytech#8345: tx/metrics: Add metrics for the RPC v2 transactionWatch_v1_submitAndWatch (paritytech#8759)

Backport paritytech#8345 into `stable2503` from lexnv.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

---------

Signed-off-by: Alexandru Vasile <[email protected]>
Co-authored-by: Alexandru Vasile <[email protected]>
Co-authored-by: Alexandru Vasile <[email protected]>
Co-authored-by: Egor_P <[email protected]>

* [stable2503] Backport paritytech#8834 (paritytech#8889)

Backport paritytech#8834 into `stable2503` from alexggh.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Signed-off-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: cmd[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: Javier Viola <[email protected]>
Co-authored-by: Javier Viola <[email protected]>

* [stable2503] Backport paritytech#8948 (paritytech#8959)

Backport paritytech#8948 into `stable2503` from alexggh.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Signed-off-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: cmd[bot] <41898282+github-actions[bot]@users.noreply.github.com>

* [stable2503] Backport paritytech#8787 (paritytech#8913)

Backport paritytech#8787 into `stable2503` from karolk91.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

---------

Co-authored-by: Karol Kokoszka <[email protected]>
Co-authored-by: Egor_P <[email protected]>
Co-authored-by: Karol Kokoszka <[email protected]>

* [stable2503] Post crates release adjustments (paritytech#8967)

Reordering of the prdocs and clean up after crates release to meet the
pipeline requirements

* [stable2503] Backport paritytech#8973 (paritytech#8978)

Backport paritytech#8973 into `stable2503` from AndreiEres.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: Andrei Eres <[email protected]>
Co-authored-by: cmd[bot] <41898282+github-actions[bot]@users.noreply.github.com>

* [stable2503] Backport paritytech#8980 (paritytech#8995)

Backport paritytech#8980 into `stable2503` from ggwpez.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Alexander Theißen <[email protected]>

* [stable2503] Post crates release adjustments (paritytech#9009)

Reordering of the prdocs and clean up after crates release to meet the
pipeline requirements

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: paritytech-release-backport-bot[bot] <191369287+paritytech-release-backport-bot[bot]@users.noreply.github.com>
Co-authored-by: Alexander Theißen <[email protected]>

* [stable2503] Backport paritytech#8932 (paritytech#9010)

Backport paritytech#8932 into `stable2503` from bkchr.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: cmd[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: Egor_P <[email protected]>

* [stable2503] Backport paritytech#8694 (paritytech#9030)

Backport paritytech#8694 into `stable2503` from tmpolaczyk.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: tmpolaczyk <[email protected]>
Co-authored-by: cmd[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Egor_P <[email protected]>

* [stable2503] Backport paritytech#9050 (paritytech#9068)

Backport paritytech#9050 into `stable2503` from ordian.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: ordian <[email protected]>

* [stable2503] Backport paritytech#9092 (paritytech#9096)

Backport paritytech#9092 into `stable2503` from EgorPopelyaev.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: Egor_P <[email protected]>

* [stable2503] Backport paritytech#9102 (paritytech#9109)

Backport paritytech#9102 into `stable2503` from iulianbarbu.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Signed-off-by: Iulian Barbu <[email protected]>
Co-authored-by: Iulian Barbu <[email protected]>
Co-authored-by: cmd[bot] <41898282+github-actions[bot]@users.noreply.github.com>

* [stable2503] Backport paritytech#9130 (paritytech#9130)

Partial manual backport of
[https://github.com/paritytech/polkadot-sdk/pull/8369](https://github.com/paritytech/polkadot-sdk/pull/8369)
- includes only the patched file with `ToParachainDeliveryHelper`, which
helps finalize
[https://github.com/polkadot-fellows/runtimes/pull/709](https://github.com/polkadot-fellows/runtimes/pull/709)
for AHM.

_(it is just benchmarking change, nothing else)_

* [stable2503] Post crates.io release updates (paritytech#9138)

This PR merges back to the stable2503 crates version bumps, node version
bumps and prdocs reordering

* [stable2503] Backport paritytech#9139 (paritytech#9144)

Backport paritytech#9139 into `stable2503` from bkontur.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: Branislav Kontur <[email protected]>
Co-authored-by: cmd[bot] <41898282+github-actions[bot]@users.noreply.github.com>

* [stable2503] Backport paritytech#8193 (paritytech#9377)

Backport paritytech#8193 into `stable2503` from alvicsam.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: Alexander Samusev <[email protected]>

* [stable2503] Backport paritytech#9094 (paritytech#9155)

Backport paritytech#9094 into `stable2503` from alexggh.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Signed-off-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: cmd[bot] <41898282+github-actions[bot]@users.noreply.github.com>

* [stable2503] Backport paritytech#9137 (paritytech#9199)

Backport paritytech#9137 into `stable2503` from franciscoaguirre.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

---------

Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: EgorPopelyaev <[email protected]>

* [stable2503] Backport paritytech#9179 (paritytech#9303)

Backport paritytech#9179 into `stable2503` from karolk91.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: Karol Kokoszka <[email protected]>
Co-authored-by: cmd[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: Branislav Kontur <[email protected]>

* [stable2503] Backport paritytech#9264 (paritytech#9275)

Backport paritytech#9264 into `stable2503` from alexggh.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Signed-off-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: cmd[bot] <41898282+github-actions[bot]@users.noreply.github.com>

* [stable2503] Backport paritytech#9281 (paritytech#9328)

Backport paritytech#9281 into `stable2503` from lexnv.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Signed-off-by: Alexandru Vasile <[email protected]>
Co-authored-by: Alexandru Vasile <[email protected]>
Co-authored-by: cmd[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: Egor_P <[email protected]>

* [stable2503] Backport paritytech#9325 (paritytech#9334)

Backport paritytech#9325 into `stable2503` from TDemeco.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: Tobi Demeco <[email protected]>
Co-authored-by: Egor_P <[email protected]>

* [stable2503] Backport paritytech#9354 (paritytech#9374)

Backport paritytech#9354 into `stable2503` from karolk91.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: Karol Kokoszka <[email protected]>
Co-authored-by: cmd[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: Egor_P <[email protected]>

* [stable2503] Backport paritytech#9355 (paritytech#9369)

Backport paritytech#9355 into `stable2503` from gui1117.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: Guillaume Thiolliere <[email protected]>
Co-authored-by: cmd[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Egor_P <[email protected]>

* [stable2503] Backport paritytech#9195 (paritytech#9404)

Backport paritytech#9195 into `stable2503` from karolk91.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

---------

Co-authored-by: Karol Kokoszka <[email protected]>
Co-authored-by: cmd[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: Adrian Catangiu <[email protected]>

* [stable2503] Post crates release updates (paritytech#9408)

This PR includes:
- crates version bumps
- node version bump
- prdocs reorderings
- and formatting for the pipeline

* Bump crate versions in: cumulus/polkadot-parachain/Cargo.toml

* Bump spec_version to 1_015_000

* Apply plan

* Edit plan

* Adjust and apply plan

* Edit and apply plan

* [stable2407 backport] runtime: make the candidate relay parent progression check more stric… (paritytech#5157)

Backports paritytech#5113 on top of
stable2407

* Backport paritytech#4791 (paritytech#5247)

Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Jun Jiang <[email protected]>

* [stable2407] Backport paritytech#5321 (paritytech#5332)

Backports paritytech#5321 on the
stable release

* [stable2407] backport paritytech#4937 (paritytech#5337)

Backport paritytech#4937 on the
stable release

* [stable2407] Backport PoV-reclaim fixes (paritytech#5273, paritytech#5281) (paritytech#5351)

Backports paritytech#5273 & paritytech#5281

---------

Co-authored-by: Guillaume Thiolliere <[email protected]>

* Move prdocs

* [Backport] Bump serde_json from 1.0.120 to 1.0.121 in the known_good_semver group (paritytech#5169) (paritytech#5367)

Bumps the known_good_semver group with 1 update:
[serde_json](https://github.com/serde-rs/json).

Updates `serde_json` from 1.0.120 to 1.0.121
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/json/releases">serde_json's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.121</h2>
<ul>
<li>Optimize position search in error path (<a
href="https://github.com/serde-rs/json/issues/1160">#1160</a>,
thanks <a

href="https://github.com/purplesyringa"><code>@​purplesyringa</code></a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a

href="https://github.com/serde-rs/json/commit/eca2658a22cb39952783cb6914eb18242659f66a"><code>eca2658</code></a>
Release 1.0.121</li>
<li><a

href="https://github.com/serde-rs/json/commit/b0d678cfb473386830d559b6ab255d9e21ba39c5"><code>b0d678c</code></a>
Merge pull request <a
href="https://github.com/serde-rs/json/issues/1160">#1160</a>
from iex-rs/efficient-position</li>
<li><a

href="https://github.com/serde-rs/json/commit/b1edc7d13f72880fd0ac569403a409e5f7961d5f"><code>b1edc7d</code></a>
Optimize position search in error path</li>
<li><a

href="https://github.com/serde-rs/json/commit/40dd7f5e862436f02471fe076f3486c55e472bc2"><code>40dd7f5</code></a>
Merge pull request <a
href="https://github.com/serde-rs/json/issues/1159">#1159</a>
from iex-rs/fix-recursion</li>
<li><a

href="https://github.com/serde-rs/json/commit/6a306e6ee9f47f3b37088217ffe3ebe9bbb54e5a"><code>6a306e6</code></a>
Move call to tri! out of check_recursion!</li>
<li><a

href="https://github.com/serde-rs/json/commit/3f1c6de4af28b1f6c5100da323f2bffaf7c2083f"><code>3f1c6de</code></a>
Ignore byte_char_slices clippy lint in test</li>
<li><a

href="https://github.com/serde-rs/json/commit/3fd6f5f49dc1c732d9b1d7dfece4f02c0d440d39"><code>3fd6f5f</code></a>
Merge pull request <a
href="https://github.com/serde-rs/json/issues/1153">#1153</a>
from dpathakj/master</li>
<li><a

href="https://github.com/serde-rs/json/commit/fcb5e83e44abe0f9c27c755a240a6ad56312c090"><code>fcb5e83</code></a>
Correct documentation URL for Value's Index impl.</li> <li>See full diff
in <a

href="https://github.com/serde-rs/json/compare/v1.0.120...v1.0.121">compare
view</a></li>
</ul>
</details>
<br />

[![Dependabot compatibility

score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=serde_json&package-manager=cargo&previous-version=1.0.120&new-version=1.0.121)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary> <br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions

</details>

---------

---------

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

* Move prdoc to release folder

* Backport timestamp logging fix (paritytech#5459)

paritytech@03c45b9

---------

Co-authored-by: Gonçalo Pestana <[email protected]>

* [Backport] Add feature to allow Aura collator to use full PoV size (paritytech#5393) (paritytech#5507)

This PR introduces a feature that allows to optionally enable using the
full PoV size.

Technically, we're ready to enable it by default, but as corresponding
runtime changes have not been propagated to the system parachain
runtimes yet, doing so could put them at risk. On the other hand, there
are teams that could benefit from it right now, and it makes no sense
for them to wait for the fellowship release and everything.

---------

Co-authored-by: Andrei Sandu <[email protected]>

* [Backport] Always include UnpaidExecution, not just when revenue is nonzero (paritytech#5510)

Backport paritytech#5369 to stable2407, which was already backported to v1.14 in
paritytech#5370

* Update plan

* [stable2407] Backport paritytech#5581 (paritytech#5603)

Backport paritytech#5581 into `stable2407` (cc @franciscoaguirre).

The dry-run shows in `forwarded_xcms` all the messages in the queues
at the time of calling the API.
Each time the API is called, the result could be different.
You could get messages even if you dry-run something that doesn't send
a message, like a `System::remark`.

This commit fixes this by clearing the message queues before doing the
dry-run, so the only messages left are the ones the users of the API actually
care about.

Co-authored-by: Francisco Aguirre <[email protected]>

* [stable2407] Backport paritytech#5466 (paritytech#5524)

Backport paritytech#5466 into `stable2407` (cc @ggwpez).

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

* Backport 1.12.0: check-weight: Disable total pov size check for mandatory extrinsics (paritytech#4592)

Backport of paritytech#4571

---------

Co-authored-by: command-bot <>

* Implement `CheckMetadataHash` extension (paritytech#4274) (paritytech#4619)

This implements the `CheckMetadataHash` extension as described in
[RFC78](https://polkadot-fellows.github.io/RFCs/approved/0078-merkleized-metadata.html).

Besides the signed extension, the `substrate-wasm-builder` is extended
to support generating the metadata-hash.

Closes: paritytech#291

---------

Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>

* init bifrost-polkadot-base

* fix: add legacy transferrable balance to currency trait (#1)

* feat: add a getter function to retrieve raw keystore value (#2)

* [stable2407] Backport paritytech#5713 (paritytech#5739)

Backport paritytech#5713 into `stable2407` from bkchr.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

* [stable2407] Backport paritytech#3049 (paritytech#5734)

Backport paritytech#3049 into `stable2407` from bgallois.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Benjamin Gallois <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

* Move prdocs to release folder

* Bump polkadot node version

* Update plan

* [stable2407]  Backport Fix parity-publish (paritytech#5670) (paritytech#6019)

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

* [stable2407] Backport docker fix to 2407 (paritytech#6017)

This PR backports fixes for the docker publishing flow from master:
- paritytech#5896
- paritytech#5387

* [stable2407] Backport paritytech#5913 (paritytech#6004)

Backport paritytech#5913 into `stable2407` from franciscoaguirre.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

---------

Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Egor_P <[email protected]>

* [stable2407] Backport paritytech#4803 (paritytech#6097)

Backport paritytech#4803 into `stable2407` from gotnoshoeson.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: Miles Patterson <[email protected]>

* [stable2407] Backport paritytech#5599 (paritytech#6068)

Backport paritytech#5599 into `stable2407` from franciscoaguirre.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

---------

Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Shawn Tabrizi <[email protected]>

* [stable2407] Backport paritytech#6205 (paritytech#6238)

Backport paritytech#6205 into `stable2407` from bkchr.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: command-bot <>

* [stable2407] Backport paritytech#6148 (paritytech#6232)

Backport paritytech#6148 into `stable2407` from bkontur.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

---------

Co-authored-by: Branislav Kontur <[email protected]>

* Bump node version

* Move prdocs

* Update plan

* Apply plan

* [stable2407] Backport paritytech#6417 (paritytech#6437)

Backport paritytech#6417 into `stable2407` from alindima.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: Alin Dima <[email protected]>

* [Release|CI/CD] Fix audiences changelog template (paritytech#6444)

This PR addresses an issue mentioned
[here](paritytech#6424 (comment)).
The problem was that when the prdoc file has two audiences, but only one
description like in
[prdoc_5660](https://github.com/paritytech/polkadot-sdk/blob/master/prdoc/1.16.0/pr_5660.prdoc)
it was ignored by the template.

* [stable2407] Backport paritytech#6526 (paritytech#6530)

Backport paritytech#6526 into `stable2407` from bkchr.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

---------

Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Bastian Köcher <[email protected]>

* [stable2407] Backport paritytech#6645 (paritytech#6655)

Backport paritytech#6645 into `stable2407` from bkontur.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

---------

Co-authored-by: Branislav Kontur <[email protected]>

* [stable2407] Backport paritytech#6579 (paritytech#6634)

Backport paritytech#6579 into `stable2407` from bkontur.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: Branislav Kontur <[email protected]>
Co-authored-by: Egor_P <[email protected]>

* [stable2407] Backport paritytech#6603 (paritytech#6668)

Backport paritytech#6603 into `stable2407` from lexnv.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: Alexandru Vasile <[email protected]>

* Backport paritytech#5887 to `stable2407` (paritytech#6674)

This PR accompanies paritytech#6672 to make backported changes consistent across
releases.

---------

Co-authored-by: Egor_P <[email protected]>

* [stable2407] Backport paritytech#6031 (paritytech#6106)

Backport paritytech#6031 into `stable2407` from drewstone.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: drewstone <[email protected]>
Co-authored-by: Egor_P <[email protected]>

* [stable2407] Backport paritytech#6080 (paritytech#6180)

Backport paritytech#6080 into `stable2407` from franciscoaguirre.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

---------

Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Egor_P <[email protected]>

* [stable2407] Backport paritytech#6540 (paritytech#6591)

Backport paritytech#6540 into `stable2407` from Ank4n.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: Ankan <[email protected]>
Co-authored-by: Egor_P <[email protected]>

* [stable2407] Backport paritytech#6506 (paritytech#6657)

Backport paritytech#6506 into `stable2407` from Dinonard.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: Dino Pačandi <[email protected]>
Co-authored-by: Egor_P <[email protected]>

* [stable2407] Backport paritytech#6459 (paritytech#6663)

Backport paritytech#6459 into `stable2407` from franciscoaguirre.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

---------

Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Egor_P <[email protected]>

* Bump polkadot node version

* Move prdoxs to release folder

* Apply plan

* Update Cargo.lock

* [stable2407] Backport paritytech#6690 (paritytech#6798)

Backport paritytech#6690 into `stable2407` from alexggh.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: Alexandru Gheorghe <[email protected]>

* [stable2407] Backport paritytech#6729 (paritytech#6828)

Backport paritytech#6729 into `stable2407` from alexggh.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

---------

Signed-off-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>

* [stable2407] Backport paritytech#6662 (paritytech#6801)

Backport paritytech#6662 into `stable2407` from eskimor.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

---------

Co-authored-by: eskimor <[email protected]>
Co-authored-by: Andrei Sandu <[email protected]>

* [stable2407] Backport paritytech#5311 (paritytech#6804)

Backport paritytech#5311 into `stable2407` from Doordashcon.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: Doordashcon <[email protected]>

* [stable2407] Backport paritytech#6696 (paritytech#6839)

Backport paritytech#6696 into `stable2407` from alexggh.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

---------

Signed-off-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>

* [stable2407] Backport paritytech#6864 (paritytech#6877)

Backport paritytech#6864 into `stable2407` from alexggh.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: Alexandru Gheorghe <[email protected]>

* [stable2407] Backport paritytech#7050 (paritytech#7058)

Backport paritytech#7050 into `stable2407` from skunert.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: Sebastian Kunert <[email protected]>

* [stable2407] Backport paritytech#7013 (paritytech#7015)

Backport paritytech#7013 into `stable2407` from bkchr.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

---------

Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: EgorPopelyaev <[email protected]>

* Switch to parity-large runners to be able to run on the github (paritytech#7113)

* Move prdocs to release folder

* Bump node_version

* [stable2407] Backport paritytech#7116 (paritytech#7135)

Backport paritytech#7116 into `stable2407` from alexggh.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: Alexandru Gheorghe <[email protected]>

* Move prdoc to release folder

* [stable2407] Backport paritytech#6807 (paritytech#7155)

Backport paritytech#6807 into `stable2407` from alexggh.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

---------

Signed-off-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>

* [stable2407] Backport paritytech#6973 (paritytech#7159)

Backport paritytech#6973 into `stable2407` from alexggh.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

---------

Signed-off-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>

* [stable2407] Backport paritytech#6971 (paritytech#7172)

Backport paritytech#6971 into `stable2407` from alexggh.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

---------

Signed-off-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>

* Move prdocs to release folder

* Apply plan

* [stable2407] Backport paritytech#7365 (paritytech#7380)

Backport paritytech#7365 into `stable2407` from vgantchev.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: Valery Gantchev <[email protected]>

* [stable2407] Backport paritytech#7437 (paritytech#7465)

Backport paritytech#7437 into `stable2407` from serban300.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Serban Iorga <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

* [stable2407] Backport paritytech#7446 (paritytech#7460)

Backport paritytech#7446 into `stable2407` from serban300.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Serban Iorga <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

* Update plan

* Apply changes

* Move prdocs to release folder

* Bump node version

* Backport 1.12.0: check-weight: Disable total pov size check for mandatory extrinsics (paritytech#4592)

Backport of paritytech#4571

---------

Co-authored-by: command-bot <>

* Implement `CheckMetadataHash` extension (paritytech#4274) (paritytech#4619)

This implements the `CheckMetadataHash` extension as described in
[RFC78](https://polkadot-fellows.github.io/RFCs/approved/0078-merkleized-metadata.html).

Besides the signed extension, the `substrate-wasm-builder` is extended
to support generating the metadata-hash.

Closes: paritytech#291

---------

Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>

* init bifrost-polkadot-base

* fix: add legacy transferrable balance to currency trait (#1)

* wasm-builder(cherry-pick): Also set mcpu for c deps (paritytech#3777)

* update Cargo.lock

* feat: add a getter function to retrieve keystore raw value

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Signed-off-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: paritytech-cmd-bot-polkadot-sdk[bot] <179002856+paritytech-cmd-bot-polkadot-sdk[bot]@users.noreply.github.com>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Benjamin Gallois <[email protected]>
Co-authored-by: EgorPopelyaev <[email protected]>
Co-authored-by: Morgan Adamiec <[email protected]>
Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Miles Patterson <[email protected]>
Co-authored-by: Shawn Tabrizi <[email protected]>
Co-authored-by: Branislav Kontur <[email protected]>
Co-authored-by: Alin Dima <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Alexandru Vasile <[email protected]>
Co-authored-by: s0me0ne-unkn0wn <[email protected]>
Co-authored-by: drewstone <[email protected]>
Co-authored-by: Ankan <[email protected]>
Co-authored-by: Dino Pačandi <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: eskimor <[email protected]>
Co-authored-by: Andrei Sandu <[email protected]>
Co-authored-by: Doordashcon <[email protected]>
Co-authored-by: Sebastian Kunert <[email protected]>
Co-authored-by: Valery Gantchev <[email protected]>
Co-authored-by: Serban Iorga <[email protected]>
Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>

* resolve conflicts

* chore: pull stable2503

* chore: remove deprecated getter

---------

Signed-off-by: Iulian Barbu <[email protected]>
Signed-off-by: Alexandru Gheorghe <[email protected]>
Signed-off-by: Alexandru Vasile <[email protected]>
Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: paritytech-release-backport-bot[bot] <191369287+paritytech-release-backport-bot[bot]@users.noreply.github.com>
Co-authored-by: Maciej <[email protected]>
Co-authored-by: ordian <[email protected]>
Co-authored-by: Stephane Gurgenidze <[email protected]>
Co-authored-by: ordian <[email protected]>
Co-authored-by: Egor_P <[email protected]>
Co-authored-by: Iulian Barbu <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Andrei Sandu <[email protected]>
Co-authored-by: cmd[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: Tsvetomir Dimitrov <[email protected]>
Co-authored-by: Javier Viola <[email protected]>
Co-authored-by: Alexandru Vasile <[email protected]>
Co-authored-by: Alexandru Vasile <[email protected]>
Co-authored-by: Javier Viola <[email protected]>
Co-authored-by: Karol Kokoszka <[email protected]>
Co-authored-by: Karol Kokoszka <[email protected]>
Co-authored-by: Andrei Eres <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Alexander Theißen <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: tmpolaczyk <[email protected]>
Co-authored-by: ordian <[email protected]>
Co-authored-by: Branislav Kontur <[email protected]>
Co-authored-by: Alexander Samusev <[email protected]>
Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Tobi Demeco <[email protected]>
Co-authored-by: Guillaume Thiolliere <[email protected]>
Co-authored-by: Adrian Catangiu <[email protected]>
Co-authored-by: Morgan Adamiec <[email protected]>
Co-authored-by: Alin Dima <[email protected]>
Co-authored-by: Jun Jiang <[email protected]>
Co-authored-by: Sebastian Kunert <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Gonçalo Pestana <[email protected]>
Co-authored-by: s0me0ne-unkn0wn <[email protected]>
Co-authored-by: Dónal Murray <[email protected]>
Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>
Co-authored-by: dnjscksdn98 <[email protected]>
Co-authored-by: paritytech-cmd-bot-polkadot-sdk[bot] <179002856+paritytech-cmd-bot-polkadot-sdk[bot]@users.noreply.github.com>
Co-authored-by: Benjamin Gallois <[email protected]>
Co-authored-by: Miles Patterson <[email protected]>
Co-authored-by: Shawn Tabrizi <[email protected]>
Co-authored-by: drewstone <[email protected]>
Co-authored-by: Ankan <[email protected]>
Co-authored-by: Dino Pačandi <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: eskimor <[email protected]>
Co-authored-by: Doordashcon <[email protected]>
Co-authored-by: Valery Gantchev <[email protected]>
Co-authored-by: Serban Iorga <[email protected]>
alstjd0921 added a commit to bifrost-platform/polkadot-sdk that referenced this pull request Aug 14, 2025
@alstjd0921 @paritytech-release-backport-bot
@Overkillus @sw10pa @ordian @EgorPopelyaev @iulianbarbu @alexggh @sandreim @github-actions @tdimitrov @pepoviola @lexnv @karolk91 @AndreiEres @ggwpez @athei @bkchr @tmpolaczyk @bkontur @alvicsam @franciscoaguirre @TDemeco @gui1117 @acatangiu @Morganamilo @alindima @jasl @skunert @dependabot @gpestana @s0me0ne-unkn0wn @seadanda @joepetrowski @liamaharon @kianenigma @dnjscksdn98 @paritytech-cmd-bot-polkadot-sdk @bgallois @gotnoshoeson @shawntabrizi @drewstone @Ank4n @Dinonard @eskimor @Doordashcon @cl0w5 @serban300
bifrost-polkadot-stable2503 (#3)
842d927 
* [stable2503] Backport paritytech#6827 (paritytech#8770)

Backport paritytech#6827 into `stable2503` from Overkillus.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: Maciej <[email protected]>
Co-authored-by: ordian <[email protected]>
Co-authored-by: Stephane Gurgenidze <[email protected]>
Co-authored-by: ordian <[email protected]>
Co-authored-by: Egor_P <[email protected]>

* [stable2503] Backport paritytech#8861 (paritytech#8867)

Backport paritytech#8861 into `stable2503` from ordian.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: ordian <[email protected]>

* [stable2503] Backport paritytech#8755 (paritytech#8814)

Backport paritytech#8755 into `stable2503` from iulianbarbu.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Signed-off-by: Iulian Barbu <[email protected]>
Co-authored-by: Iulian Barbu <[email protected]>
Co-authored-by: Egor_P <[email protected]>

* [stable2503] Backport paritytech#8832 (paritytech#8846)

Backport paritytech#8832 into `stable2503` from alexggh.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Signed-off-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Andrei Sandu <[email protected]>
Co-authored-by: cmd[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: Egor_P <[email protected]>

* [stable2503] Backport paritytech#8837 (paritytech#8884)

Backport paritytech#8837 into `stable2503` from tdimitrov.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: Tsvetomir Dimitrov <[email protected]>
Co-authored-by: Javier Viola <[email protected]>
Co-authored-by: Egor_P <[email protected]>

* [stable2503] Backport paritytech#8345: tx/metrics: Add metrics for the RPC v2 transactionWatch_v1_submitAndWatch (paritytech#8759)

Backport paritytech#8345 into `stable2503` from lexnv.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

---------

Signed-off-by: Alexandru Vasile <[email protected]>
Co-authored-by: Alexandru Vasile <[email protected]>
Co-authored-by: Alexandru Vasile <[email protected]>
Co-authored-by: Egor_P <[email protected]>

* [stable2503] Backport paritytech#8834 (paritytech#8889)

Backport paritytech#8834 into `stable2503` from alexggh.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Signed-off-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: cmd[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: Javier Viola <[email protected]>
Co-authored-by: Javier Viola <[email protected]>

* [stable2503] Backport paritytech#8948 (paritytech#8959)

Backport paritytech#8948 into `stable2503` from alexggh.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Signed-off-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: cmd[bot] <41898282+github-actions[bot]@users.noreply.github.com>

* [stable2503] Backport paritytech#8787 (paritytech#8913)

Backport paritytech#8787 into `stable2503` from karolk91.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

---------

Co-authored-by: Karol Kokoszka <[email protected]>
Co-authored-by: Egor_P <[email protected]>
Co-authored-by: Karol Kokoszka <[email protected]>

* [stable2503] Post crates release adjustments (paritytech#8967)

Reordering of the prdocs and clean up after crates release to meet the
pipeline requirements

* [stable2503] Backport paritytech#8973 (paritytech#8978)

Backport paritytech#8973 into `stable2503` from AndreiEres.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: Andrei Eres <[email protected]>
Co-authored-by: cmd[bot] <41898282+github-actions[bot]@users.noreply.github.com>

* [stable2503] Backport paritytech#8980 (paritytech#8995)

Backport paritytech#8980 into `stable2503` from ggwpez.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Alexander Theißen <[email protected]>

* [stable2503] Post crates release adjustments (paritytech#9009)

Reordering of the prdocs and clean up after crates release to meet the
pipeline requirements

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: paritytech-release-backport-bot[bot] <191369287+paritytech-release-backport-bot[bot]@users.noreply.github.com>
Co-authored-by: Alexander Theißen <[email protected]>

* [stable2503] Backport paritytech#8932 (paritytech#9010)

Backport paritytech#8932 into `stable2503` from bkchr.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: cmd[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: Egor_P <[email protected]>

* [stable2503] Backport paritytech#8694 (paritytech#9030)

Backport paritytech#8694 into `stable2503` from tmpolaczyk.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: tmpolaczyk <[email protected]>
Co-authored-by: cmd[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Egor_P <[email protected]>

* [stable2503] Backport paritytech#9050 (paritytech#9068)

Backport paritytech#9050 into `stable2503` from ordian.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: ordian <[email protected]>

* [stable2503] Backport paritytech#9092 (paritytech#9096)

Backport paritytech#9092 into `stable2503` from EgorPopelyaev.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: Egor_P <[email protected]>

* [stable2503] Backport paritytech#9102 (paritytech#9109)

Backport paritytech#9102 into `stable2503` from iulianbarbu.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Signed-off-by: Iulian Barbu <[email protected]>
Co-authored-by: Iulian Barbu <[email protected]>
Co-authored-by: cmd[bot] <41898282+github-actions[bot]@users.noreply.github.com>

* [stable2503] Backport paritytech#9130 (paritytech#9130)

Partial manual backport of
[https://github.com/paritytech/polkadot-sdk/pull/8369](https://github.com/paritytech/polkadot-sdk/pull/8369)
- includes only the patched file with `ToParachainDeliveryHelper`, which
helps finalize
[https://github.com/polkadot-fellows/runtimes/pull/709](https://github.com/polkadot-fellows/runtimes/pull/709)
for AHM.

_(it is just benchmarking change, nothing else)_

* [stable2503] Post crates.io release updates (paritytech#9138)

This PR merges back to the stable2503 crates version bumps, node version
bumps and prdocs reordering

* [stable2503] Backport paritytech#9139 (paritytech#9144)

Backport paritytech#9139 into `stable2503` from bkontur.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: Branislav Kontur <[email protected]>
Co-authored-by: cmd[bot] <41898282+github-actions[bot]@users.noreply.github.com>

* [stable2503] Backport paritytech#8193 (paritytech#9377)

Backport paritytech#8193 into `stable2503` from alvicsam.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: Alexander Samusev <[email protected]>

* [stable2503] Backport paritytech#9094 (paritytech#9155)

Backport paritytech#9094 into `stable2503` from alexggh.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Signed-off-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: cmd[bot] <41898282+github-actions[bot]@users.noreply.github.com>

* [stable2503] Backport paritytech#9137 (paritytech#9199)

Backport paritytech#9137 into `stable2503` from franciscoaguirre.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

---------

Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: EgorPopelyaev <[email protected]>

* [stable2503] Backport paritytech#9179 (paritytech#9303)

Backport paritytech#9179 into `stable2503` from karolk91.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: Karol Kokoszka <[email protected]>
Co-authored-by: cmd[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: Branislav Kontur <[email protected]>

* [stable2503] Backport paritytech#9264 (paritytech#9275)

Backport paritytech#9264 into `stable2503` from alexggh.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Signed-off-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: cmd[bot] <41898282+github-actions[bot]@users.noreply.github.com>

* [stable2503] Backport paritytech#9281 (paritytech#9328)

Backport paritytech#9281 into `stable2503` from lexnv.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Signed-off-by: Alexandru Vasile <[email protected]>
Co-authored-by: Alexandru Vasile <[email protected]>
Co-authored-by: cmd[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: Egor_P <[email protected]>

* [stable2503] Backport paritytech#9325 (paritytech#9334)

Backport paritytech#9325 into `stable2503` from TDemeco.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: Tobi Demeco <[email protected]>
Co-authored-by: Egor_P <[email protected]>

* [stable2503] Backport paritytech#9354 (paritytech#9374)

Backport paritytech#9354 into `stable2503` from karolk91.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: Karol Kokoszka <[email protected]>
Co-authored-by: cmd[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: Egor_P <[email protected]>

* [stable2503] Backport paritytech#9355 (paritytech#9369)

Backport paritytech#9355 into `stable2503` from gui1117.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: Guillaume Thiolliere <[email protected]>
Co-authored-by: cmd[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Egor_P <[email protected]>

* [stable2503] Backport paritytech#9195 (paritytech#9404)

Backport paritytech#9195 into `stable2503` from karolk91.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

---------

Co-authored-by: Karol Kokoszka <[email protected]>
Co-authored-by: cmd[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: Adrian Catangiu <[email protected]>

* [stable2503] Post crates release updates (paritytech#9408)

This PR includes:
- crates version bumps
- node version bump
- prdocs reorderings
- and formatting for the pipeline

* Bump crate versions in: cumulus/polkadot-parachain/Cargo.toml

* Bump spec_version to 1_015_000

* Apply plan

* Edit plan

* Adjust and apply plan

* Edit and apply plan

* [stable2407 backport] runtime: make the candidate relay parent progression check more stric… (paritytech#5157)

Backports paritytech#5113 on top of
stable2407

* Backport paritytech#4791 (paritytech#5247)

Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Jun Jiang <[email protected]>

* [stable2407] Backport paritytech#5321 (paritytech#5332)

Backports paritytech#5321 on the
stable release

* [stable2407] backport paritytech#4937 (paritytech#5337)

Backport paritytech#4937 on the
stable release

* [stable2407] Backport PoV-reclaim fixes (paritytech#5273, paritytech#5281) (paritytech#5351)

Backports paritytech#5273 & paritytech#5281

---------

Co-authored-by: Guillaume Thiolliere <[email protected]>

* Move prdocs

* [Backport] Bump serde_json from 1.0.120 to 1.0.121 in the known_good_semver group (paritytech#5169) (paritytech#5367)

Bumps the known_good_semver group with 1 update:
[serde_json](https://github.com/serde-rs/json).

Updates `serde_json` from 1.0.120 to 1.0.121
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/json/releases">serde_json's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.121</h2>
<ul>
<li>Optimize position search in error path (<a
href="https://github.com/serde-rs/json/issues/1160">#1160</a>,
thanks <a

href="https://github.com/purplesyringa"><code>@​purplesyringa</code></a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a

href="https://github.com/serde-rs/json/commit/eca2658a22cb39952783cb6914eb18242659f66a"><code>eca2658</code></a>
Release 1.0.121</li>
<li><a

href="https://github.com/serde-rs/json/commit/b0d678cfb473386830d559b6ab255d9e21ba39c5"><code>b0d678c</code></a>
Merge pull request <a
href="https://github.com/serde-rs/json/issues/1160">#1160</a>
from iex-rs/efficient-position</li>
<li><a

href="https://github.com/serde-rs/json/commit/b1edc7d13f72880fd0ac569403a409e5f7961d5f"><code>b1edc7d</code></a>
Optimize position search in error path</li>
<li><a

href="https://github.com/serde-rs/json/commit/40dd7f5e862436f02471fe076f3486c55e472bc2"><code>40dd7f5</code></a>
Merge pull request <a
href="https://github.com/serde-rs/json/issues/1159">#1159</a>
from iex-rs/fix-recursion</li>
<li><a

href="https://github.com/serde-rs/json/commit/6a306e6ee9f47f3b37088217ffe3ebe9bbb54e5a"><code>6a306e6</code></a>
Move call to tri! out of check_recursion!</li>
<li><a

href="https://github.com/serde-rs/json/commit/3f1c6de4af28b1f6c5100da323f2bffaf7c2083f"><code>3f1c6de</code></a>
Ignore byte_char_slices clippy lint in test</li>
<li><a

href="https://github.com/serde-rs/json/commit/3fd6f5f49dc1c732d9b1d7dfece4f02c0d440d39"><code>3fd6f5f</code></a>
Merge pull request <a
href="https://github.com/serde-rs/json/issues/1153">#1153</a>
from dpathakj/master</li>
<li><a

href="https://github.com/serde-rs/json/commit/fcb5e83e44abe0f9c27c755a240a6ad56312c090"><code>fcb5e83</code></a>
Correct documentation URL for Value's Index impl.</li> <li>See full diff
in <a

href="https://github.com/serde-rs/json/compare/v1.0.120...v1.0.121">compare
view</a></li>
</ul>
</details>
<br />

[![Dependabot compatibility

score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=serde_json&package-manager=cargo&previous-version=1.0.120&new-version=1.0.121)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary> <br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions

</details>

---------

---------

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

* Move prdoc to release folder

* Backport timestamp logging fix (paritytech#5459)

paritytech@03c45b9

---------

Co-authored-by: Gonçalo Pestana <[email protected]>

* [Backport] Add feature to allow Aura collator to use full PoV size (paritytech#5393) (paritytech#5507)

This PR introduces a feature that allows to optionally enable using the
full PoV size.

Technically, we're ready to enable it by default, but as corresponding
runtime changes have not been propagated to the system parachain
runtimes yet, doing so could put them at risk. On the other hand, there
are teams that could benefit from it right now, and it makes no sense
for them to wait for the fellowship release and everything.

---------

Co-authored-by: Andrei Sandu <[email protected]>

* [Backport] Always include UnpaidExecution, not just when revenue is nonzero (paritytech#5510)

Backport paritytech#5369 to stable2407, which was already backported to v1.14 in
paritytech#5370

* Update plan

* [stable2407] Backport paritytech#5581 (paritytech#5603)

Backport paritytech#5581 into `stable2407` (cc @franciscoaguirre).

The dry-run shows in `forwarded_xcms` all the messages in the queues
at the time of calling the API.
Each time the API is called, the result could be different.
You could get messages even if you dry-run something that doesn't send
a message, like a `System::remark`.

This commit fixes this by clearing the message queues before doing the
dry-run, so the only messages left are the ones the users of the API actually
care about.

Co-authored-by: Francisco Aguirre <[email protected]>

* [stable2407] Backport paritytech#5466 (paritytech#5524)

Backport paritytech#5466 into `stable2407` (cc @ggwpez).

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

* Backport 1.12.0: check-weight: Disable total pov size check for mandatory extrinsics (paritytech#4592)

Backport of paritytech#4571

---------

Co-authored-by: command-bot <>

* Implement `CheckMetadataHash` extension (paritytech#4274) (paritytech#4619)

This implements the `CheckMetadataHash` extension as described in
[RFC78](https://polkadot-fellows.github.io/RFCs/approved/0078-merkleized-metadata.html).

Besides the signed extension, the `substrate-wasm-builder` is extended
to support generating the metadata-hash.

Closes: paritytech#291

---------

Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>

* init bifrost-polkadot-base

* fix: add legacy transferrable balance to currency trait (#1)

* feat: add a getter function to retrieve raw keystore value (#2)

* [stable2407] Backport paritytech#5713 (paritytech#5739)

Backport paritytech#5713 into `stable2407` from bkchr.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

* [stable2407] Backport paritytech#3049 (paritytech#5734)

Backport paritytech#3049 into `stable2407` from bgallois.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Benjamin Gallois <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

* Move prdocs to release folder

* Bump polkadot node version

* Update plan

* [stable2407]  Backport Fix parity-publish (paritytech#5670) (paritytech#6019)

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

* [stable2407] Backport docker fix to 2407 (paritytech#6017)

This PR backports fixes for the docker publishing flow from master:
- paritytech#5896
- paritytech#5387

* [stable2407] Backport paritytech#5913 (paritytech#6004)

Backport paritytech#5913 into `stable2407` from franciscoaguirre.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

---------

Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Egor_P <[email protected]>

* [stable2407] Backport paritytech#4803 (paritytech#6097)

Backport paritytech#4803 into `stable2407` from gotnoshoeson.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: Miles Patterson <[email protected]>

* [stable2407] Backport paritytech#5599 (paritytech#6068)

Backport paritytech#5599 into `stable2407` from franciscoaguirre.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

---------

Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Shawn Tabrizi <[email protected]>

* [stable2407] Backport paritytech#6205 (paritytech#6238)

Backport paritytech#6205 into `stable2407` from bkchr.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: command-bot <>

* [stable2407] Backport paritytech#6148 (paritytech#6232)

Backport paritytech#6148 into `stable2407` from bkontur.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

---------

Co-authored-by: Branislav Kontur <[email protected]>

* Bump node version

* Move prdocs

* Update plan

* Apply plan

* [stable2407] Backport paritytech#6417 (paritytech#6437)

Backport paritytech#6417 into `stable2407` from alindima.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: Alin Dima <[email protected]>

* [Release|CI/CD] Fix audiences changelog template (paritytech#6444)

This PR addresses an issue mentioned
[here](paritytech#6424 (comment)).
The problem was that when the prdoc file has two audiences, but only one
description like in
[prdoc_5660](https://github.com/paritytech/polkadot-sdk/blob/master/prdoc/1.16.0/pr_5660.prdoc)
it was ignored by the template.

* [stable2407] Backport paritytech#6526 (paritytech#6530)

Backport paritytech#6526 into `stable2407` from bkchr.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

---------

Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Bastian Köcher <[email protected]>

* [stable2407] Backport paritytech#6645 (paritytech#6655)

Backport paritytech#6645 into `stable2407` from bkontur.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

---------

Co-authored-by: Branislav Kontur <[email protected]>

* [stable2407] Backport paritytech#6579 (paritytech#6634)

Backport paritytech#6579 into `stable2407` from bkontur.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: Branislav Kontur <[email protected]>
Co-authored-by: Egor_P <[email protected]>

* [stable2407] Backport paritytech#6603 (paritytech#6668)

Backport paritytech#6603 into `stable2407` from lexnv.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: Alexandru Vasile <[email protected]>

* Backport paritytech#5887 to `stable2407` (paritytech#6674)

This PR accompanies paritytech#6672 to make backported changes consistent across
releases.

---------

Co-authored-by: Egor_P <[email protected]>

* [stable2407] Backport paritytech#6031 (paritytech#6106)

Backport paritytech#6031 into `stable2407` from drewstone.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: drewstone <[email protected]>
Co-authored-by: Egor_P <[email protected]>

* [stable2407] Backport paritytech#6080 (paritytech#6180)

Backport paritytech#6080 into `stable2407` from franciscoaguirre.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

---------

Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Egor_P <[email protected]>

* [stable2407] Backport paritytech#6540 (paritytech#6591)

Backport paritytech#6540 into `stable2407` from Ank4n.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: Ankan <[email protected]>
Co-authored-by: Egor_P <[email protected]>

* [stable2407] Backport paritytech#6506 (paritytech#6657)

Backport paritytech#6506 into `stable2407` from Dinonard.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: Dino Pačandi <[email protected]>
Co-authored-by: Egor_P <[email protected]>

* [stable2407] Backport paritytech#6459 (paritytech#6663)

Backport paritytech#6459 into `stable2407` from franciscoaguirre.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

---------

Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Egor_P <[email protected]>

* Bump polkadot node version

* Move prdoxs to release folder

* Apply plan

* Update Cargo.lock

* [stable2407] Backport paritytech#6690 (paritytech#6798)

Backport paritytech#6690 into `stable2407` from alexggh.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: Alexandru Gheorghe <[email protected]>

* [stable2407] Backport paritytech#6729 (paritytech#6828)

Backport paritytech#6729 into `stable2407` from alexggh.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

---------

Signed-off-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>

* [stable2407] Backport paritytech#6662 (paritytech#6801)

Backport paritytech#6662 into `stable2407` from eskimor.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

---------

Co-authored-by: eskimor <[email protected]>
Co-authored-by: Andrei Sandu <[email protected]>

* [stable2407] Backport paritytech#5311 (paritytech#6804)

Backport paritytech#5311 into `stable2407` from Doordashcon.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: Doordashcon <[email protected]>

* [stable2407] Backport paritytech#6696 (paritytech#6839)

Backport paritytech#6696 into `stable2407` from alexggh.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

---------

Signed-off-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>

* [stable2407] Backport paritytech#6864 (paritytech#6877)

Backport paritytech#6864 into `stable2407` from alexggh.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: Alexandru Gheorghe <[email protected]>

* [stable2407] Backport paritytech#7050 (paritytech#7058)

Backport paritytech#7050 into `stable2407` from skunert.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: Sebastian Kunert <[email protected]>

* [stable2407] Backport paritytech#7013 (paritytech#7015)

Backport paritytech#7013 into `stable2407` from bkchr.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

---------

Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: EgorPopelyaev <[email protected]>

* Switch to parity-large runners to be able to run on the github (paritytech#7113)

* Move prdocs to release folder

* Bump node_version

* [stable2407] Backport paritytech#7116 (paritytech#7135)

Backport paritytech#7116 into `stable2407` from alexggh.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: Alexandru Gheorghe <[email protected]>

* Move prdoc to release folder

* [stable2407] Backport paritytech#6807 (paritytech#7155)

Backport paritytech#6807 into `stable2407` from alexggh.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

---------

Signed-off-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>

* [stable2407] Backport paritytech#6973 (paritytech#7159)

Backport paritytech#6973 into `stable2407` from alexggh.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

---------

Signed-off-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>

* [stable2407] Backport paritytech#6971 (paritytech#7172)

Backport paritytech#6971 into `stable2407` from alexggh.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

---------

Signed-off-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>

* Move prdocs to release folder

* Apply plan

* [stable2407] Backport paritytech#7365 (paritytech#7380)

Backport paritytech#7365 into `stable2407` from vgantchev.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

Co-authored-by: Valery Gantchev <[email protected]>

* [stable2407] Backport paritytech#7437 (paritytech#7465)

Backport paritytech#7437 into `stable2407` from serban300.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Serban Iorga <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

* [stable2407] Backport paritytech#7446 (paritytech#7460)

Backport paritytech#7446 into `stable2407` from serban300.

See the
[documentation](https://github.com/paritytech/polkadot-sdk/blob/master/docs/BACKPORT.md)
on how to use this bot.

<!--
  # To be used by other automation, do not modify:
  original-pr-number: #${pull_number}
-->

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Serban Iorga <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

* Update plan

* Apply changes

* Move prdocs to release folder

* Bump node version

* Backport 1.12.0: check-weight: Disable total pov size check for mandatory extrinsics (paritytech#4592)

Backport of paritytech#4571

---------

Co-authored-by: command-bot <>

* Implement `CheckMetadataHash` extension (paritytech#4274) (paritytech#4619)

This implements the `CheckMetadataHash` extension as described in
[RFC78](https://polkadot-fellows.github.io/RFCs/approved/0078-merkleized-metadata.html).

Besides the signed extension, the `substrate-wasm-builder` is extended
to support generating the metadata-hash.

Closes: paritytech#291

---------

Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>

* init bifrost-polkadot-base

* fix: add legacy transferrable balance to currency trait (#1)

* wasm-builder(cherry-pick): Also set mcpu for c deps (paritytech#3777)

* update Cargo.lock

* feat: add a getter function to retrieve keystore raw value

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Signed-off-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: paritytech-cmd-bot-polkadot-sdk[bot] <179002856+paritytech-cmd-bot-polkadot-sdk[bot]@users.noreply.github.com>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Benjamin Gallois <[email protected]>
Co-authored-by: EgorPopelyaev <[email protected]>
Co-authored-by: Morgan Adamiec <[email protected]>
Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Miles Patterson <[email protected]>
Co-authored-by: Shawn Tabrizi <[email protected]>
Co-authored-by: Branislav Kontur <[email protected]>
Co-authored-by: Alin Dima <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Alexandru Vasile <[email protected]>
Co-authored-by: s0me0ne-unkn0wn <[email protected]>
Co-authored-by: drewstone <[email protected]>
Co-authored-by: Ankan <[email protected]>
Co-authored-by: Dino Pačandi <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: eskimor <[email protected]>
Co-authored-by: Andrei Sandu <[email protected]>
Co-authored-by: Doordashcon <[email protected]>
Co-authored-by: Sebastian Kunert <[email protected]>
Co-authored-by: Valery Gantchev <[email protected]>
Co-authored-by: Serban Iorga <[email protected]>
Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>

* resolve conflicts

* chore: pull stable2503

* chore: remove deprecated getter

---------

Signed-off-by: Iulian Barbu <[email protected]>
Signed-off-by: Alexandru Gheorghe <[email protected]>
Signed-off-by: Alexandru Vasile <[email protected]>
Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: paritytech-release-backport-bot[bot] <191369287+paritytech-release-backport-bot[bot]@users.noreply.github.com>
Co-authored-by: Maciej <[email protected]>
Co-authored-by: ordian <[email protected]>
Co-authored-by: Stephane Gurgenidze <[email protected]>
Co-authored-by: ordian <[email protected]>
Co-authored-by: Egor_P <[email protected]>
Co-authored-by: Iulian Barbu <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Andrei Sandu <[email protected]>
Co-authored-by: cmd[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: Tsvetomir Dimitrov <[email protected]>
Co-authored-by: Javier Viola <[email protected]>
Co-authored-by: Alexandru Vasile <[email protected]>
Co-authored-by: Alexandru Vasile <[email protected]>
Co-authored-by: Javier Viola <[email protected]>
Co-authored-by: Karol Kokoszka <[email protected]>
Co-authored-by: Karol Kokoszka <[email protected]>
Co-authored-by: Andrei Eres <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Alexander Theißen <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: tmpolaczyk <[email protected]>
Co-authored-by: ordian <[email protected]>
Co-authored-by: Branislav Kontur <[email protected]>
Co-authored-by: Alexander Samusev <[email protected]>
Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Tobi Demeco <[email protected]>
Co-authored-by: Guillaume Thiolliere <[email protected]>
Co-authored-by: Adrian Catangiu <[email protected]>
Co-authored-by: Morgan Adamiec <[email protected]>
Co-authored-by: Alin Dima <[email protected]>
Co-authored-by: Jun Jiang <[email protected]>
Co-authored-by: Sebastian Kunert <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Gonçalo Pestana <[email protected]>
Co-authored-by: s0me0ne-unkn0wn <[email protected]>
Co-authored-by: Dónal Murray <[email protected]>
Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>
Co-authored-by: dnjscksdn98 <[email protected]>
Co-authored-by: paritytech-cmd-bot-polkadot-sdk[bot] <179002856+paritytech-cmd-bot-polkadot-sdk[bot]@users.noreply.github.com>
Co-authored-by: Benjamin Gallois <[email protected]>
Co-authored-by: Miles Patterson <[email protected]>
Co-authored-by: Shawn Tabrizi <[email protected]>
Co-authored-by: drewstone <[email protected]>
Co-authored-by: Ankan <[email protected]>
Co-authored-by: Dino Pačandi <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: eskimor <[email protected]>
Co-authored-by: Doordashcon <[email protected]>
Co-authored-by: Valery Gantchev <[email protected]>
Co-authored-by: Serban Iorga <[email protected]>
alvicsam pushed a commit that referenced this pull request Oct 17, 2025
@alexggh @github-actions @alvicsam
bitfield_distribution: fix subsystem clogged at begining of a session (…
f975a0c 
…#9094)

`handle_peer_view_change` gets called on NewGossipTopology with the
existing view of the peer to cover for the case when the topology might
arrive late, but in that case in the view will contain old blocks from
previous session, so since the X/Y neighbour change because of the
topology change you end up sending a lot of messages for blocks before
the session changed.

Fix it by checking the send message only for relay chains that are in
the same session as the current topology.

---------

Signed-off-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: cmd[bot] <41898282+github-actions[bot]@users.noreply.github.com>
@clangenb clangenb mentioned this pull request Oct 30, 2025
Open
@clangenb
Copy link
Contributor

clangenb commented Oct 30, 2025

As per #5487 (comment), I am not sure if this is 100% resolved yet. According to these logs, I can see a clogging issue around the session change.

However, there seem to have been a few networking issues before, although our monitoring did not record any issues, and the provider confirmed that there was no downtime. I also upload the logs here that I put into the other issue.

Explore-logs-2025-10-30 08_34_39.txt

@clangenb clangenb mentioned this pull request Oct 30, 2025
Closed
@clangenb
Copy link
Contributor

clangenb commented Oct 30, 2025

Sorry, I thought that this is an issue not a PR. I have opened an issue for this: #10161

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Reviewers

@AndreiEres AndreiEres AndreiEres approved these changes

@sandreim sandreim sandreim approved these changes

+1 more reviewer

@ordian ordian ordian approved these changes

Reviewers whose approvals may not affect merge requirements

Assignees

No one assigned

Labels

A4-backport-stable2503 Pull request must be backported to the stable2503 release branch A4-backport-stable2506 Pull request must be backported to the stable2506 release branch

Projects

None yet

Milestone

No milestone

Development

Successfully merging this pull request may close these issues.

7 participants

@alexggh @burdges @clangenb @ordian @AndreiEres @sandreim