Refactor the engine to process samples in the range of [-1.0, 1.0]. Fixes Bug #1204039.#126
Conversation
ghost
assigned
|
@ywwg could you please test that vinyl control still works? :) |
|
Oops, I forgot shoutcast/recording. |
|
I'll take a look |
|
Thanks. The tests pass and the actual code changes are pretty non-controversial -- I just don't have a VC setup to test. |
|
Debug [AnalyserQueue 1]: Beat calculation will not start Program received signal SIGFPE, Arithmetic exception. Thread 28 (Thread 0x7fff81bf5700 (LWP 1180)): Thread 27 (Thread 0x7fff823f6700 (LWP 1179)): Thread 26 (Thread 0x7fff8b9a3700 (LWP 1140)): Thread 25 (Thread 0x7fff99212700 (LWP 1139)): ---Type to continue, or q to quit--- Thread 23 (Thread 0x7fff99a13700 (LWP 1137)): Thread 22 (Thread 0x7fff9a214700 (LWP 1136)): Thread 21 (Thread 0x7fff9b4dc700 (LWP 1135)): Thread 20 (Thread 0x7fffacd75700 (LWP 1134)): Thread 19 (Thread 0x7fffae603700 (LWP 1133)): Thread 18 (Thread 0x7fffafafe700 (LWP 1132)): Thread 17 (Thread 0x7fffbd725700 (LWP 1131)): Thread 16 (Thread 0x7fffbefb3700 (LWP 1130)): Thread 15 (Thread 0x7fffc4856700 (LWP 1129)): ---Type to continue, or q to quit--- Thread 13 (Thread 0x7fffc7df2700 (LWP 1127)): Thread 12 (Thread 0x7fffc6d05700 (LWP 1124)): Thread 7 (Thread 0x7fffdc891700 (LWP 1119)): Thread 6 (Thread 0x7fffdd425700 (LWP 1118)): Thread 3 (Thread 0x7fffdec28700 (LWP 1114)): Thread 2 (Thread 0x7fffe015f700 (LWP 1113)): Thread 1 (Thread 0x7ffff7f967c0 (LWP 1099)): |
|
I will be going on vacation tomorrow so I may be slow in retesting |
|
It is possible to test vinyl without a setup, although it's tricky:
That will cause the samples from the serato CD to feed into the vinyl control input of deck 2, so deck 2 should start playing. |
|
Hm. That segfault smells like we're writing past VinylControlXwax's |
|
The crash happens right when the play button illuminates so I suspect the pitch smoothing code. |
|
Right -- |
…ixes Bug #1204039. * Move Vinyl Control pre-amp to VinylControlXwax (no longer affects microphone/passthrough). * Switch PortAudio input sample format to paFloat32. * Remove SHRT_MAX conversions on input and output samples. * Update VUMeters, clipping, and dithering code to deal with the new ranges. * Clean up EngineMicrophone/EnginePassthrough/EngineDeck handling of inputs. * Update tests to deal with the new sample ranges. This does not change SoundSource. SoundSources still read 16-bit samples and we simply divide by SHRT_MAX in AnalyserQueue and CachingReaderWorker. A future performance improvement can remove this and use the native decoder API to request normalized samples directly.
Conflicts: src/vinylcontrol/vinylcontrol.cpp src/vinylcontrol/vinylcontrol.h src/vinylcontrol/vinylcontrolxwax.cpp src/vinylcontrol/vinylcontrolxwax.h
There was a problem hiding this comment.
Note to self: Need to update MIN_SIGNAL to account for normalization.
There was a problem hiding this comment.
It reads fine to me but maybe I'm missing something?
There was a problem hiding this comment.
Maybe the commas are making it confusing?
There was a problem hiding this comment.
it sounds like we used to normalize between -1 and 1, but now we normalize from -1 to 1.
There was a problem hiding this comment.
Hm, yea that's meant to read "Before we did X, we did Y".
There was a problem hiding this comment.
Re-worded to something hopefully more clear.
|
I run my sound card at 24 bit resolution... is that something a) that we/pulseaudio even support, or b) would be affected by this change, for better or worse? |
|
I believe this change should be good for 24-bit mode. Previously we took input as 16-bit PCM so PA would have to adapt from 24-bit to 16-bit PCM and we would convert from 16-bit PCM to float. Now, PA converts from 24-bit PCM to [-1.0, 1.0] normalized floats when it delivers input to us and takes out [-1.0, 1.0] floats and converts them back to 24-bit PCM on output. Basically, we save a 16-bit -> 24-bit conversion. In general (regardless of bit-depth your soundcard is using), this saves on a bunch of multiplying input and output by SHRT_MAX. |
|
Any sign of that segfault you saw? |
|
no sign of the segfault. |
|
LGTM |
Refactor the engine to process samples in the range of [-1.0, 1.0]. Fixes Bug #1204039.
2 participants
microphone/passthrough).
This does not change SoundSource. SoundSources still read 16-bit samples and we
simply divide by SHRT_MAX in AnalyserQueue and CachingReaderWorker. A future
performance improvement can remove this and use the native decoder API to
request normalized samples directly.