Topic/sof dev: fix TDF8532 codec and machine driver #15

plbossart · 2018-07-02T18:52:58Z

Make sure all known code for this codec is used for SOF.
The PR first reverts everything added before and re-adds all patches as needed.

Clean-up before re-adding latest code Signed-off-by: Pierre-Louis Bossart <[email protected]>

This is a basic driver to register the codec, expose the codec DAI and control the power mode of the amplifier. Change-Id: Ie6ab037cd4d6c87e8e139b6d8af6cd4295445bf2 Signed-off-by: Mohit Sinha <[email protected]> Signed-off-by: Steffen Wagner <[email protected]> Reviewed-on: https://git-gar-1.devtools.intel.com/gerrit/15296 Reviewed-by: B, Jayachandran <[email protected]> Reviewed-by: Shaik, Kareem M <[email protected]> Reviewed-by: Koul, Vinod <[email protected]> Tested-by: Sm, Bhadur A <[email protected]>

Initialized the reported variables, listed below warning: 'ret' may be used uninitialized in this function warning: 'status_repl' may be used uninitialized in this function Change-Id: I6ca5a6e017402a582239d75959c122ffaa9f7298 Signed-off-by: Gogineni, GiribabuX <[email protected]> Reviewed-on: https://git-gar-1.devtools.intel.com/gerrit/17572 Reviewed-by: Singh, Guneshwor O <[email protected]> Reviewed-by: Sinha, Mohit <[email protected]> Reviewed-by: Shaik, Kareem M <[email protected]> Reviewed-by: Koul, Vinod <[email protected]> Tested-by: Sm, Bhadur A <[email protected]>

While doing the continuous play and stop, the codec may not be ready for I2C reading after successive writes. This triggers BE failure, because I2C reading value is incorrect. Fix this by adding 10ms delay to ensure the smooth I2C read and write. Change-Id: If918e263bc799fecc2c807229f5b4b165e011fa6 Signed-off-by: Gogineni, GiribabuX <[email protected]> Reviewed-on: https://git-gar-1.devtools.intel.com/gerrit/20404 Reviewed-by: Shaik, Kareem M <[email protected]> Reviewed-by: Sinha, Mohit <[email protected]> Reviewed-by: Nc, Shreyas <[email protected]> Reviewed-by: Periyasamy, SriramX <[email protected]> Reviewed-by: Kale, Sanyog R <[email protected]> Tested-by: Sm, Bhadur A <[email protected]>

Fix kmemleak issue in tdf8532_wait_state function by releasing the memory getting allocated continuosly in instance of get_dev_status_repl i.e. status_repl before exiting the function. kernel memory leakage in audio stack/kmemleak backtrace: unreferenced object 0xffff88006227cc20 (size 32): comm "irq/25-snd_soc_", pid 2302, jiffies 4294679082 (age 5506.010s) hex dump (first 32 bytes): 02 00 03 80 80 02 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81afb06a>] kmemleak_alloc+0x4a/0xa0 [<ffffffff81201108>] __kmalloc+0x128/0x210 [<ffffffffa01b3426>] tdf8532_wait_state.constprop.5+0x116/0x260 [snd_soc_tdf8532] [<ffffffffa01b361b>] tdf8532_dai_trigger+0xab/0x15a [snd_soc_tdf8532] [<ffffffff819181e5>] soc_pcm_trigger+0x75/0x130 [<ffffffff81919339>] dpcm_do_trigger.isra.6+0x29/0x90 [<ffffffff8191952d>] dpcm_be_dai_trigger+0x18d/0x350 Change-Id: I550897d6b1efbd5ebbe15ab47038adf99581a82f Tracked-On: https://jira01.devtools.intel.com/browse/OAM-62665 Signed-off-by: Liu Changcheng <[email protected]> Reviewed-on: https://git-gar-1.devtools.intel.com/gerrit/23270 Reviewed-by: Shaik, ShahinaX <[email protected]> Reviewed-by: Singh, Guneshwor O <[email protected]> Reviewed-by: Gogineni, GiribabuX <[email protected]> Reviewed-by: Tewani, Pradeep D <[email protected]> Reviewed-by: Kesapragada, Pardha Saradhi <[email protected]> Reviewed-by: Kp, Jeeja <[email protected]> Tested-by: Madiwalar, MadiwalappaX <[email protected]>

1. Check allocated space before using it. 2. The repl_buff parameter in tdf8523_single_read is used to store the read data from i2c interface. When the data isn't right read, the pre-allocate space should be freed and the content of repl_buff should be set as NULL in case of being wrong used by the caller. 3. In the wrong case i.e. ret != len, return -EINVAL Change-Id: I3d0e12a9fcb6516716efc92eb734a0248ab3fb28 Tracked-On: https://jira01.devtools.intel.com/browse/OAM-62665 Signed-off-by: Liu Changcheng <[email protected]> Reviewed-on: https://git-gar-1.devtools.intel.com/gerrit/23266 Reviewed-by: Shaik, ShahinaX <[email protected]> Reviewed-by: Kesapragada, Pardha Saradhi <[email protected]> Reviewed-by: Gogineni, GiribabuX <[email protected]> Reviewed-by: Singh, Guneshwor O <[email protected]> Reviewed-by: Tewani, Pradeep D <[email protected]> Reviewed-by: Kp, Jeeja <[email protected]> Tested-by: Madiwalar, MadiwalappaX <[email protected]>

Based on the TDF8532 manual: If the wait_state result is ok, we should send CLK_DISCONNECT command to force codec from STANDBY(2) to IDLE(1). If the wait_state result is timeout, the codec state should be at Clockfail(7), we still should send CLK_DISCONNECT command force the codec from Clockfail(7) to Idle(1). Signed-off-by: Wu Zhigang <[email protected]> Reviewed-by: Keyon Jie <[email protected]>

Needs to be squashed for 4.18+ Signed-off-by: Pierre-Louis Bossart <[email protected]>

This is the machine driver for NXP TDF8532 Change-Id: Ieee7ba1fc2dab6fbe43836b65def88c81360d48f Signed-off-by: Mohit Sinha <[email protected]> Signed-off-by: Markus Schweikhardt <[email protected]> Reviewed-on: https://git-gar-1.devtools.intel.com/gerrit/15375 Reviewed-by: Shaik, Kareem M <[email protected]> Reviewed-by: B, Jayachandran <[email protected]> Reviewed-by: Koul, Vinod <[email protected]> Tested-by: Sm, Bhadur A <[email protected]>

Added two DAI links for probe playback and capture Change-Id: I0bf364eba3b6a2b779625a6fd1b664c2530a1ab2 Signed-off-by: Sinha, Mohit <[email protected]>

Add two FW logging DAI for each DSP core Change-Id: Ic825ecb4afbbcacabda6b74e2e5f2969fc722a1f Signed-off-by: Sinha, Mohit <[email protected]>

Audio playback not resumed after it is suspended. Add snd_soc_pm_ops to execute power management operation. Change-Id: I84ccf6a0ac7e35c1f79971ee59555f24024d4309 Signed-off-by: Mohit Sinha <[email protected]> Reviewed-on: https://git-gar-1.devtools.intel.com/gerrit/17914 Reviewed-by: Shaik, Kareem M <[email protected]> Reviewed-by: Prusty, Subhransu S <[email protected]> Reviewed-by: H S, Vijay <[email protected]> Reviewed-by: Kp, Jeeja <[email protected]> Reviewed-by: audio_build <[email protected]> Reviewed-by: Koul, Vinod <[email protected]> Tested-by: Avati, Santosh Kumar <[email protected]>

Fixup function does the masking of the format to set the SSP2 to 32 bit Change-Id: I1c5f20ce1244f9c3a47a47342d46184fdd718290 Signed-off-by: Mohit Sinha <[email protected]> Reviewed-on: https://git-gar-1.devtools.intel.com/gerrit/18076 Reviewed-by: Gogineni, GiribabuX <[email protected]> Reviewed-by: Shaik, Kareem M <[email protected]> Reviewed-by: Koul, Vinod <[email protected]> Tested-by: Sm, Bhadur A <[email protected]>

Signed-off-by: Keyon Jie <[email protected]>

We set ignore_machine for SOF soc platform driver, which will trigger overriding FEs in soc_check_tplg_fes(), but this overriding may be overidden again by add_dai_link() in bxt_tdf8532, e.g. platform_name will be modified to be "0000:00:0e.0", which is not exist in SOF. Here add #ifdef to bypass add_dai_link() for using the machine driver with SOF to fix the overridden again issue. Signed-off-by: Keyon Jie <[email protected]>

…dynamic We should use .dynamic for all FE dai_links, so change probe and trace buffer ones here to align to that. Signed-off-by: Keyon Jie <[email protected]>

Make checkpatch happy, no functionality change Signed-off-by: Pierre-Louis Bossart <[email protected]>

commit a5ba1d9 upstream. We have reports of the following crash: PID: 7 TASK: ffff88085c6d61c0 CPU: 1 COMMAND: "kworker/u25:0" #0 [ffff88085c6db710] machine_kexec at ffffffff81046239 #1 [ffff88085c6db760] crash_kexec at ffffffff810fc248 #2 [ffff88085c6db830] oops_end at ffffffff81008ae7 #3 [ffff88085c6db860] no_context at ffffffff81050b8f thesofproject#4 [ffff88085c6db8b0] __bad_area_nosemaphore at ffffffff81050d75 thesofproject#5 [ffff88085c6db900] bad_area_nosemaphore at ffffffff81050e83 thesofproject#6 [ffff88085c6db910] __do_page_fault at ffffffff8105132e thesofproject#7 [ffff88085c6db9b0] do_page_fault at ffffffff8105152c thesofproject#8 [ffff88085c6db9c0] page_fault at ffffffff81a3f122 [exception RIP: uart_put_char+149] RIP: ffffffff814b67b5 RSP: ffff88085c6dba78 RFLAGS: 00010006 RAX: 0000000000000292 RBX: ffffffff827c5120 RCX: 0000000000000081 RDX: 0000000000000000 RSI: 000000000000005f RDI: ffffffff827c5120 RBP: ffff88085c6dba98 R8: 000000000000012c R9: ffffffff822ea320 R10: ffff88085fe4db04 R11: 0000000000000001 R12: ffff881059f9c000 R13: 0000000000000001 R14: 000000000000005f R15: 0000000000000fba ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 thesofproject#9 [ffff88085c6dbaa0] tty_put_char at ffffffff81497544 thesofproject#10 [ffff88085c6dbac0] do_output_char at ffffffff8149c91c thesofproject#11 [ffff88085c6dbae0] __process_echoes at ffffffff8149cb8b thesofproject#12 [ffff88085c6dbb30] commit_echoes at ffffffff8149cdc2 thesofproject#13 [ffff88085c6dbb60] n_tty_receive_buf_fast at ffffffff8149e49b thesofproject#14 [ffff88085c6dbbc0] __receive_buf at ffffffff8149ef5a thesofproject#15 [ffff88085c6dbc20] n_tty_receive_buf_common at ffffffff8149f016 thesofproject#16 [ffff88085c6dbca0] n_tty_receive_buf2 at ffffffff8149f194 thesofproject#17 [ffff88085c6dbcb0] flush_to_ldisc at ffffffff814a238a thesofproject#18 [ffff88085c6dbd50] process_one_work at ffffffff81090be2 thesofproject#19 [ffff88085c6dbe20] worker_thread at ffffffff81091b4d thesofproject#20 [ffff88085c6dbeb0] kthread at ffffffff81096384 thesofproject#21 [ffff88085c6dbf50] ret_from_fork at ffffffff81a3d69f after slogging through some dissasembly: ffffffff814b6720 <uart_put_char>: ffffffff814b6720: 55 push %rbp ffffffff814b6721: 48 89 e5 mov %rsp,%rbp ffffffff814b6724: 48 83 ec 20 sub $0x20,%rsp ffffffff814b6728: 48 89 1c 24 mov %rbx,(%rsp) ffffffff814b672c: 4c 89 64 24 08 mov %r12,0x8(%rsp) ffffffff814b6731: 4c 89 6c 24 10 mov %r13,0x10(%rsp) ffffffff814b6736: 4c 89 74 24 18 mov %r14,0x18(%rsp) ffffffff814b673b: e8 b0 8e 58 00 callq ffffffff81a3f5f0 <mcount> ffffffff814b6740: 4c 8b a7 88 02 00 00 mov 0x288(%rdi),%r12 ffffffff814b6747: 45 31 ed xor %r13d,%r13d ffffffff814b674a: 41 89 f6 mov %esi,%r14d ffffffff814b674d: 49 83 bc 24 70 01 00 cmpq $0x0,0x170(%r12) ffffffff814b6754: 00 00 ffffffff814b6756: 49 8b 9c 24 80 01 00 mov 0x180(%r12),%rbx ffffffff814b675d: 00 ffffffff814b675e: 74 2f je ffffffff814b678f <uart_put_char+0x6f> ffffffff814b6760: 48 89 df mov %rbx,%rdi ffffffff814b6763: e8 a8 67 58 00 callq ffffffff81a3cf10 <_raw_spin_lock_irqsave> ffffffff814b6768: 41 8b 8c 24 78 01 00 mov 0x178(%r12),%ecx ffffffff814b676f: 00 ffffffff814b6770: 89 ca mov %ecx,%edx ffffffff814b6772: f7 d2 not %edx ffffffff814b6774: 41 03 94 24 7c 01 00 add 0x17c(%r12),%edx ffffffff814b677b: 00 ffffffff814b677c: 81 e2 ff 0f 00 00 and $0xfff,%edx ffffffff814b6782: 75 23 jne ffffffff814b67a7 <uart_put_char+0x87> ffffffff814b6784: 48 89 c6 mov %rax,%rsi ffffffff814b6787: 48 89 df mov %rbx,%rdi ffffffff814b678a: e8 e1 64 58 00 callq ffffffff81a3cc70 <_raw_spin_unlock_irqrestore> ffffffff814b678f: 44 89 e8 mov %r13d,%eax ffffffff814b6792: 48 8b 1c 24 mov (%rsp),%rbx ffffffff814b6796: 4c 8b 64 24 08 mov 0x8(%rsp),%r12 ffffffff814b679b: 4c 8b 6c 24 10 mov 0x10(%rsp),%r13 ffffffff814b67a0: 4c 8b 74 24 18 mov 0x18(%rsp),%r14 ffffffff814b67a5: c9 leaveq ffffffff814b67a6: c3 retq ffffffff814b67a7: 49 8b 94 24 70 01 00 mov 0x170(%r12),%rdx ffffffff814b67ae: 00 ffffffff814b67af: 48 63 c9 movslq %ecx,%rcx ffffffff814b67b2: 41 b5 01 mov $0x1,%r13b ffffffff814b67b5: 44 88 34 0a mov %r14b,(%rdx,%rcx,1) ffffffff814b67b9: 41 8b 94 24 78 01 00 mov 0x178(%r12),%edx ffffffff814b67c0: 00 ffffffff814b67c1: 83 c2 01 add $0x1,%edx ffffffff814b67c4: 81 e2 ff 0f 00 00 and $0xfff,%edx ffffffff814b67ca: 41 89 94 24 78 01 00 mov %edx,0x178(%r12) ffffffff814b67d1: 00 ffffffff814b67d2: eb b0 jmp ffffffff814b6784 <uart_put_char+0x64> ffffffff814b67d4: 66 66 66 2e 0f 1f 84 data32 data32 nopw %cs:0x0(%rax,%rax,1) ffffffff814b67db: 00 00 00 00 00 for our build, this is crashing at: circ->buf[circ->head] = c; Looking in uart_port_startup(), it seems that circ->buf (state->xmit.buf) protected by the "per-port mutex", which based on uart_port_check() is state->port.mutex. Indeed, the lock acquired in uart_put_char() is uport->lock, i.e. not the same lock. Anyway, since the lock is not acquired, if uart_shutdown() is called, the last chunk of that function may release state->xmit.buf before its assigned to null, and cause the race above. To fix it, let's lock uport->lock when allocating/deallocating state->xmit.buf in addition to the per-port mutex. v2: switch to locking uport->lock on allocation/deallocation instead of locking the per-port mutex in uart_put_char. Note that since uport->lock is a spin lock, we have to switch the allocation to GFP_ATOMIC. v3: move the allocation outside the lock, so we can switch back to GFP_KERNEL Signed-off-by: Tycho Andersen <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 6cc4a08 upstream. info->nr_rings isn't adjusted in case of ENOMEM error from negotiate_mq(). This leads to kernel panic in error path. Typical call stack involving panic - thesofproject#8 page_fault at ffffffff8175936f [exception RIP: blkif_free_ring+33] RIP: ffffffffa0149491 RSP: ffff8804f7673c08 RFLAGS: 00010292 ... thesofproject#9 blkif_free at ffffffffa0149aaa [xen_blkfront] thesofproject#10 talk_to_blkback at ffffffffa014c8cd [xen_blkfront] thesofproject#11 blkback_changed at ffffffffa014ea8b [xen_blkfront] thesofproject#12 xenbus_otherend_changed at ffffffff81424670 thesofproject#13 backend_changed at ffffffff81426dc3 thesofproject#14 xenwatch_thread at ffffffff81422f29 thesofproject#15 kthread at ffffffff810abe6a thesofproject#16 ret_from_fork at ffffffff81754078 Cc: [email protected] Fixes: 7ed8ce1 ("xen-blkfront: move negotiate_mq to cover all cases of new VBDs") Signed-off-by: Manjunath Patil <[email protected]> Acked-by: Roger Pau Monné <[email protected]> Signed-off-by: Juergen Gross <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

If codec registration fails after the ASoC Intel SST driver has been probed, the kernel will Oops and crash at suspend/resume. general protection fault: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 PID: 2811 Comm: cat Tainted: G W 4.19.30 thesofproject#15 Hardware name: GOOGLE Clapper, BIOS Google_Clapper.5216.199.7 08/22/2014 RIP: 0010:snd_soc_suspend+0x5a/0xd21 Code: 03 80 3c 10 00 49 89 d7 74 0b 48 89 df e8 71 72 c4 fe 4c 89 fa 48 8b 03 48 89 45 d0 48 8d 98 a0 01 00 00 48 89 d8 48 c1 e8 03 <8a> 04 10 84 c0 0f 85 85 0c 00 00 80 3b 00 0f 84 6b 0c 00 00 48 8b RSP: 0018:ffff888035407750 EFLAGS: 00010202 RAX: 0000000000000034 RBX: 00000000000001a0 RCX: 0000000000000000 RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff88805c417098 RBP: ffff8880354077b0 R08: dffffc0000000000 R09: ffffed100b975718 R10: 0000000000000001 R11: ffffffff949ea4a3 R12: 1ffff1100b975746 R13: dffffc0000000000 R14: ffff88805cba4588 R15: dffffc0000000000 FS: 0000794a78e91b80(0000) GS:ffff888068d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007bd5283ccf58 CR3: 000000004b7aa000 CR4: 00000000001006e0 Call Trace: ? dpm_complete+0x67b/0x67b ? i915_gem_suspend+0x14d/0x1ad sst_soc_prepare+0x91/0x1dd ? sst_be_hw_params+0x7e/0x7e dpm_prepare+0x39a/0x88b dpm_suspend_start+0x13/0x9d suspend_devices_and_enter+0x18f/0xbd7 ? arch_suspend_enable_irqs+0x11/0x11 ? printk+0xd9/0x12d ? lock_release+0x95f/0x95f ? log_buf_vmcoreinfo_setup+0x131/0x131 ? rcu_read_lock_sched_held+0x140/0x22a ? __bpf_trace_rcu_utilization+0xa/0xa ? __pm_pr_dbg+0x186/0x190 ? pm_notifier_call_chain+0x39/0x39 ? suspend_test+0x9d/0x9d pm_suspend+0x2f4/0x728 ? trace_suspend_resume+0x3da/0x3da ? lock_release+0x95f/0x95f ? kernfs_fop_write+0x19f/0x32d state_store+0xd8/0x147 ? sysfs_kf_read+0x155/0x155 kernfs_fop_write+0x23e/0x32d __vfs_write+0x108/0x608 ? vfs_read+0x2e9/0x2e9 ? rcu_read_lock_sched_held+0x140/0x22a ? __bpf_trace_rcu_utilization+0xa/0xa ? debug_smp_processor_id+0x10/0x10 ? selinux_file_permission+0x1c5/0x3c8 ? rcu_sync_lockdep_assert+0x6a/0xad ? __sb_start_write+0x129/0x2ac vfs_write+0x1aa/0x434 ksys_write+0xfe/0x1be ? __ia32_sys_read+0x82/0x82 do_syscall_64+0xcd/0x120 entry_SYSCALL_64_after_hwframe+0x49/0xbe In the observed situation, the problem is seen because the codec driver failed to probe due to a hardware problem. max98090 i2c-193C9890:00: Failed to read device revision: -1 max98090 i2c-193C9890:00: ASoC: failed to probe component -1 cht-bsw-max98090 cht-bsw-max98090: ASoC: failed to instantiate card -1 cht-bsw-max98090 cht-bsw-max98090: snd_soc_register_card failed -1 cht-bsw-max98090: probe of cht-bsw-max98090 failed with error -1 The problem is similar to the problem solved with commit 2fc995a ("ASoC: intel: Fix crash at suspend/resume without card registration"), but codec registration fails at a later point. At that time, the pointer checked with the above mentioned commit is already set, but it is not cleared if the device is subsequently removed. Adding a remove function to clear the pointer fixes the problem. Cc: [email protected] Cc: Jarkko Nikula <[email protected]> Cc: Curtis Malainey <[email protected]> Signed-off-by: Guenter Roeck <[email protected]> Acked-by: Pierre-Louis Bossart <[email protected]> Signed-off-by: Mark Brown <[email protected]> (cherry picked from commit 8f71370)

If codec registration fails after the ASoC Intel SST driver has been probed, the kernel will Oops and crash at suspend/resume. general protection fault: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 PID: 2811 Comm: cat Tainted: G W 4.19.30 #15 Hardware name: GOOGLE Clapper, BIOS Google_Clapper.5216.199.7 08/22/2014 RIP: 0010:snd_soc_suspend+0x5a/0xd21 Code: 03 80 3c 10 00 49 89 d7 74 0b 48 89 df e8 71 72 c4 fe 4c 89 fa 48 8b 03 48 89 45 d0 48 8d 98 a0 01 00 00 48 89 d8 48 c1 e8 03 <8a> 04 10 84 c0 0f 85 85 0c 00 00 80 3b 00 0f 84 6b 0c 00 00 48 8b RSP: 0018:ffff888035407750 EFLAGS: 00010202 RAX: 0000000000000034 RBX: 00000000000001a0 RCX: 0000000000000000 RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff88805c417098 RBP: ffff8880354077b0 R08: dffffc0000000000 R09: ffffed100b975718 R10: 0000000000000001 R11: ffffffff949ea4a3 R12: 1ffff1100b975746 R13: dffffc0000000000 R14: ffff88805cba4588 R15: dffffc0000000000 FS: 0000794a78e91b80(0000) GS:ffff888068d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007bd5283ccf58 CR3: 000000004b7aa000 CR4: 00000000001006e0 Call Trace: ? dpm_complete+0x67b/0x67b ? i915_gem_suspend+0x14d/0x1ad sst_soc_prepare+0x91/0x1dd ? sst_be_hw_params+0x7e/0x7e dpm_prepare+0x39a/0x88b dpm_suspend_start+0x13/0x9d suspend_devices_and_enter+0x18f/0xbd7 ? arch_suspend_enable_irqs+0x11/0x11 ? printk+0xd9/0x12d ? lock_release+0x95f/0x95f ? log_buf_vmcoreinfo_setup+0x131/0x131 ? rcu_read_lock_sched_held+0x140/0x22a ? __bpf_trace_rcu_utilization+0xa/0xa ? __pm_pr_dbg+0x186/0x190 ? pm_notifier_call_chain+0x39/0x39 ? suspend_test+0x9d/0x9d pm_suspend+0x2f4/0x728 ? trace_suspend_resume+0x3da/0x3da ? lock_release+0x95f/0x95f ? kernfs_fop_write+0x19f/0x32d state_store+0xd8/0x147 ? sysfs_kf_read+0x155/0x155 kernfs_fop_write+0x23e/0x32d __vfs_write+0x108/0x608 ? vfs_read+0x2e9/0x2e9 ? rcu_read_lock_sched_held+0x140/0x22a ? __bpf_trace_rcu_utilization+0xa/0xa ? debug_smp_processor_id+0x10/0x10 ? selinux_file_permission+0x1c5/0x3c8 ? rcu_sync_lockdep_assert+0x6a/0xad ? __sb_start_write+0x129/0x2ac vfs_write+0x1aa/0x434 ksys_write+0xfe/0x1be ? __ia32_sys_read+0x82/0x82 do_syscall_64+0xcd/0x120 entry_SYSCALL_64_after_hwframe+0x49/0xbe In the observed situation, the problem is seen because the codec driver failed to probe due to a hardware problem. max98090 i2c-193C9890:00: Failed to read device revision: -1 max98090 i2c-193C9890:00: ASoC: failed to probe component -1 cht-bsw-max98090 cht-bsw-max98090: ASoC: failed to instantiate card -1 cht-bsw-max98090 cht-bsw-max98090: snd_soc_register_card failed -1 cht-bsw-max98090: probe of cht-bsw-max98090 failed with error -1 The problem is similar to the problem solved with commit 2fc995a ("ASoC: intel: Fix crash at suspend/resume without card registration"), but codec registration fails at a later point. At that time, the pointer checked with the above mentioned commit is already set, but it is not cleared if the device is subsequently removed. Adding a remove function to clear the pointer fixes the problem. Cc: [email protected] Cc: Jarkko Nikula <[email protected]> Cc: Curtis Malainey <[email protected]> Signed-off-by: Guenter Roeck <[email protected]> Acked-by: Pierre-Louis Bossart <[email protected]> Signed-off-by: Mark Brown <[email protected]> (cherry picked from commit 8f71370)

…r-free issue The evlist should be destroyed before the perf session. Detected with gcc's ASan: ================================================================= ==27350==ERROR: AddressSanitizer: heap-use-after-free on address 0x62b000002e38 at pc 0x5611da276999 bp 0x7ffce8f1d1a0 sp 0x7ffce8f1d190 WRITE of size 8 at 0x62b000002e38 thread T0 #0 0x5611da276998 in __list_del /home/work/linux/tools/include/linux/list.h:89 #1 0x5611da276d4a in __list_del_entry /home/work/linux/tools/include/linux/list.h:102 #2 0x5611da276e77 in list_del_init /home/work/linux/tools/include/linux/list.h:145 #3 0x5611da2781cd in thread__put util/thread.c:130 #4 0x5611da2cc0a8 in __thread__zput util/thread.h:68 #5 0x5611da2d2dcb in hist_entry__delete util/hist.c:1148 #6 0x5611da2cdf91 in hists__delete_entry util/hist.c:337 #7 0x5611da2ce19e in hists__delete_entries util/hist.c:365 #8 0x5611da2db2ab in hists__delete_all_entries util/hist.c:2639 #9 0x5611da2db325 in hists_evsel__exit util/hist.c:2651 #10 0x5611da1c5352 in perf_evsel__exit util/evsel.c:1304 #11 0x5611da1c5390 in perf_evsel__delete util/evsel.c:1309 #12 0x5611da1b35f0 in perf_evlist__purge util/evlist.c:124 #13 0x5611da1b38e2 in perf_evlist__delete util/evlist.c:148 #14 0x5611da069781 in cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1645 #15 0x5611da17d038 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #16 0x5611da17d577 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #17 0x5611da17d97b in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #18 0x5611da17e0e9 in main /home/changbin/work/linux/tools/perf/perf.c:520 #19 0x7fdcc970f09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) #20 0x5611d9ff35c9 in _start (/home/work/linux/tools/perf/perf+0x3e95c9) 0x62b000002e38 is located 11320 bytes inside of 27448-byte region [0x62b000000200,0x62b000006d38) freed by thread T0 here: #0 0x7fdccb04ab70 in free (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xedb70) #1 0x5611da260df4 in perf_session__delete util/session.c:201 #2 0x5611da063de5 in __cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1300 #3 0x5611da06973c in cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1642 #4 0x5611da17d038 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #5 0x5611da17d577 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #6 0x5611da17d97b in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #7 0x5611da17e0e9 in main /home/changbin/work/linux/tools/perf/perf.c:520 #8 0x7fdcc970f09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) previously allocated by thread T0 here: #0 0x7fdccb04b138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138) #1 0x5611da26010c in zalloc util/util.h:23 #2 0x5611da260824 in perf_session__new util/session.c:118 #3 0x5611da0633a6 in __cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1192 #4 0x5611da06973c in cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1642 #5 0x5611da17d038 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #6 0x5611da17d577 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #7 0x5611da17d97b in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #8 0x5611da17e0e9 in main /home/changbin/work/linux/tools/perf/perf.c:520 #9 0x7fdcc970f09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) SUMMARY: AddressSanitizer: heap-use-after-free /home/work/linux/tools/include/linux/list.h:89 in __list_del Shadow bytes around the buggy address: 0x0c567fff8570: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff8580: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff8590: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff85a0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff85b0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd =>0x0c567fff85c0: fd fd fd fd fd fd fd[fd]fd fd fd fd fd fd fd fd 0x0c567fff85d0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff85e0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff85f0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff8600: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff8610: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd Shadow byte legend (one shadow byte represents 8 application bytes): Addressable: 00 Partially addressable: 01 02 03 04 05 06 07 Heap left redzone: fa Freed heap region: fd Stack left redzone: f1 Stack mid redzone: f2 Stack right redzone: f3 Stack after return: f5 Stack use after scope: f8 Global redzone: f9 Global init order: f6 Poisoned by user: f7 Container overflow: fc Array cookie: ac Intra object redzone: bb ASan internal: fe Left alloca redzone: ca Right alloca redzone: cb ==27350==ABORTING Signed-off-by: Changbin Du <[email protected]> Reviewed-by: Jiri Olsa <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

Using gcc's ASan, Changbin reports: ================================================================= ==7494==ERROR: LeakSanitizer: detected memory leaks Direct leak of 48 byte(s) in 1 object(s) allocated from: #0 0x7f0333a89138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138) #1 0x5625e5330a5e in zalloc util/util.h:23 #2 0x5625e5330a9b in perf_counts__new util/counts.c:10 #3 0x5625e5330ca0 in perf_evsel__alloc_counts util/counts.c:47 #4 0x5625e520d8e5 in __perf_evsel__read_on_cpu util/evsel.c:1505 #5 0x5625e517a985 in perf_evsel__read_on_cpu /home/work/linux/tools/perf/util/evsel.h:347 #6 0x5625e517ad1a in test__openat_syscall_event tests/openat-syscall.c:47 #7 0x5625e51528e6 in run_test tests/builtin-test.c:358 #8 0x5625e5152baf in test_and_print tests/builtin-test.c:388 #9 0x5625e51543fe in __cmd_test tests/builtin-test.c:583 #10 0x5625e515572f in cmd_test tests/builtin-test.c:722 #11 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #12 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #13 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #14 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520 #15 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) Indirect leak of 72 byte(s) in 1 object(s) allocated from: #0 0x7f0333a89138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138) #1 0x5625e532560d in zalloc util/util.h:23 #2 0x5625e532566b in xyarray__new util/xyarray.c:10 #3 0x5625e5330aba in perf_counts__new util/counts.c:15 #4 0x5625e5330ca0 in perf_evsel__alloc_counts util/counts.c:47 #5 0x5625e520d8e5 in __perf_evsel__read_on_cpu util/evsel.c:1505 #6 0x5625e517a985 in perf_evsel__read_on_cpu /home/work/linux/tools/perf/util/evsel.h:347 #7 0x5625e517ad1a in test__openat_syscall_event tests/openat-syscall.c:47 #8 0x5625e51528e6 in run_test tests/builtin-test.c:358 #9 0x5625e5152baf in test_and_print tests/builtin-test.c:388 #10 0x5625e51543fe in __cmd_test tests/builtin-test.c:583 #11 0x5625e515572f in cmd_test tests/builtin-test.c:722 #12 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #13 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #14 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #15 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520 #16 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) His patch took care of evsel->prev_raw_counts, but the above backtraces are about evsel->counts, so fix that instead. Reported-by: Changbin Du <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

If codec registration fails after the ASoC Intel SST driver has been probed, the kernel will Oops and crash at suspend/resume. general protection fault: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 PID: 2811 Comm: cat Tainted: G W 4.19.30 #15 Hardware name: GOOGLE Clapper, BIOS Google_Clapper.5216.199.7 08/22/2014 RIP: 0010:snd_soc_suspend+0x5a/0xd21 Code: 03 80 3c 10 00 49 89 d7 74 0b 48 89 df e8 71 72 c4 fe 4c 89 fa 48 8b 03 48 89 45 d0 48 8d 98 a0 01 00 00 48 89 d8 48 c1 e8 03 <8a> 04 10 84 c0 0f 85 85 0c 00 00 80 3b 00 0f 84 6b 0c 00 00 48 8b RSP: 0018:ffff888035407750 EFLAGS: 00010202 RAX: 0000000000000034 RBX: 00000000000001a0 RCX: 0000000000000000 RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff88805c417098 RBP: ffff8880354077b0 R08: dffffc0000000000 R09: ffffed100b975718 R10: 0000000000000001 R11: ffffffff949ea4a3 R12: 1ffff1100b975746 R13: dffffc0000000000 R14: ffff88805cba4588 R15: dffffc0000000000 FS: 0000794a78e91b80(0000) GS:ffff888068d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007bd5283ccf58 CR3: 000000004b7aa000 CR4: 00000000001006e0 Call Trace: ? dpm_complete+0x67b/0x67b ? i915_gem_suspend+0x14d/0x1ad sst_soc_prepare+0x91/0x1dd ? sst_be_hw_params+0x7e/0x7e dpm_prepare+0x39a/0x88b dpm_suspend_start+0x13/0x9d suspend_devices_and_enter+0x18f/0xbd7 ? arch_suspend_enable_irqs+0x11/0x11 ? printk+0xd9/0x12d ? lock_release+0x95f/0x95f ? log_buf_vmcoreinfo_setup+0x131/0x131 ? rcu_read_lock_sched_held+0x140/0x22a ? __bpf_trace_rcu_utilization+0xa/0xa ? __pm_pr_dbg+0x186/0x190 ? pm_notifier_call_chain+0x39/0x39 ? suspend_test+0x9d/0x9d pm_suspend+0x2f4/0x728 ? trace_suspend_resume+0x3da/0x3da ? lock_release+0x95f/0x95f ? kernfs_fop_write+0x19f/0x32d state_store+0xd8/0x147 ? sysfs_kf_read+0x155/0x155 kernfs_fop_write+0x23e/0x32d __vfs_write+0x108/0x608 ? vfs_read+0x2e9/0x2e9 ? rcu_read_lock_sched_held+0x140/0x22a ? __bpf_trace_rcu_utilization+0xa/0xa ? debug_smp_processor_id+0x10/0x10 ? selinux_file_permission+0x1c5/0x3c8 ? rcu_sync_lockdep_assert+0x6a/0xad ? __sb_start_write+0x129/0x2ac vfs_write+0x1aa/0x434 ksys_write+0xfe/0x1be ? __ia32_sys_read+0x82/0x82 do_syscall_64+0xcd/0x120 entry_SYSCALL_64_after_hwframe+0x49/0xbe In the observed situation, the problem is seen because the codec driver failed to probe due to a hardware problem. max98090 i2c-193C9890:00: Failed to read device revision: -1 max98090 i2c-193C9890:00: ASoC: failed to probe component -1 cht-bsw-max98090 cht-bsw-max98090: ASoC: failed to instantiate card -1 cht-bsw-max98090 cht-bsw-max98090: snd_soc_register_card failed -1 cht-bsw-max98090: probe of cht-bsw-max98090 failed with error -1 The problem is similar to the problem solved with commit 2fc995a ("ASoC: intel: Fix crash at suspend/resume without card registration"), but codec registration fails at a later point. At that time, the pointer checked with the above mentioned commit is already set, but it is not cleared if the device is subsequently removed. Adding a remove function to clear the pointer fixes the problem. Cc: [email protected] Cc: Jarkko Nikula <[email protected]> Cc: Curtis Malainey <[email protected]> Signed-off-by: Guenter Roeck <[email protected]> Acked-by: Pierre-Louis Bossart <[email protected]> Signed-off-by: Mark Brown <[email protected]>

Commit 656fe2b (tracing: Use hist trigger's var_ref array to destroy var_refs) centralized the destruction of all the var_refs in one place so that other code didn't have to do it. The track_data_destroy() added later ignored that and also destroyed the track_data var_ref, causing a double-free error flagged by KASAN. ================================================================== BUG: KASAN: use-after-free in destroy_hist_field+0x30/0x70 Read of size 8 at addr ffff888086df2210 by task bash/1694 CPU: 6 PID: 1694 Comm: bash Not tainted 5.1.0-rc1-test+ #15 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016 Call Trace: dump_stack+0x71/0xa0 ? destroy_hist_field+0x30/0x70 print_address_description.cold.3+0x9/0x1fb ? destroy_hist_field+0x30/0x70 ? destroy_hist_field+0x30/0x70 kasan_report.cold.4+0x1a/0x33 ? __kasan_slab_free+0x100/0x150 ? destroy_hist_field+0x30/0x70 destroy_hist_field+0x30/0x70 track_data_destroy+0x55/0xe0 destroy_hist_data+0x1f0/0x350 hist_unreg_all+0x203/0x220 event_trigger_open+0xbb/0x130 do_dentry_open+0x296/0x700 ? stacktrace_count_trigger+0x30/0x30 ? generic_permission+0x56/0x200 ? __x64_sys_fchdir+0xd0/0xd0 ? inode_permission+0x55/0x200 ? security_inode_permission+0x18/0x60 path_openat+0x633/0x22b0 ? path_lookupat.isra.50+0x420/0x420 ? __kasan_kmalloc.constprop.12+0xc1/0xd0 ? kmem_cache_alloc+0xe5/0x260 ? getname_flags+0x6c/0x2a0 ? do_sys_open+0x149/0x2b0 ? do_syscall_64+0x73/0x1b0 ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 ? _raw_write_lock_bh+0xe0/0xe0 ? __kernel_text_address+0xe/0x30 ? unwind_get_return_address+0x2f/0x50 ? __list_add_valid+0x2d/0x70 ? deactivate_slab.isra.62+0x1f4/0x5a0 ? getname_flags+0x6c/0x2a0 ? set_track+0x76/0x120 do_filp_open+0x11a/0x1a0 ? may_open_dev+0x50/0x50 ? _raw_spin_lock+0x7a/0xd0 ? _raw_write_lock_bh+0xe0/0xe0 ? __alloc_fd+0x10f/0x200 do_sys_open+0x1db/0x2b0 ? filp_open+0x50/0x50 do_syscall_64+0x73/0x1b0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fa7b24a4ca2 Code: 25 00 00 41 00 3d 00 00 41 00 74 4c 48 8d 05 85 7a 0d 00 8b 00 85 c0 75 6d 89 f2 b8 01 01 00 00 48 89 fe bf 9c ff ff ff 0f 05 <48> 3d 00 f0 ff ff 0f 87 a2 00 00 00 48 8b 4c 24 28 64 48 33 0c 25 RSP: 002b:00007fffbafb3af0 EFLAGS: 00000246 ORIG_RAX: 0000000000000101 RAX: ffffffffffffffda RBX: 000055d3648ade30 RCX: 00007fa7b24a4ca2 RDX: 0000000000000241 RSI: 000055d364a55240 RDI: 00000000ffffff9c RBP: 00007fffbafb3bf0 R08: 0000000000000020 R09: 0000000000000002 R10: 00000000000001b6 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000003 R14: 0000000000000001 R15: 000055d364a55240 ================================================================== So remove the track_data_destroy() destroy_hist_field() call for that var_ref. Link: http://lkml.kernel.org/r/[email protected] Fixes: 466f452 ("tracing: Generalize hist trigger onmax and save action") Reported-by: Steven Rostedt (VMware) <[email protected]> Signed-off-by: Tom Zanussi <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>

If codec registration fails after the ASoC Intel SST driver has been probed, the kernel will Oops and crash at suspend/resume. general protection fault: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 PID: 2811 Comm: cat Tainted: G W 4.19.30 thesofproject#15 Hardware name: GOOGLE Clapper, BIOS Google_Clapper.5216.199.7 08/22/2014 RIP: 0010:snd_soc_suspend+0x5a/0xd21 Code: 03 80 3c 10 00 49 89 d7 74 0b 48 89 df e8 71 72 c4 fe 4c 89 fa 48 8b 03 48 89 45 d0 48 8d 98 a0 01 00 00 48 89 d8 48 c1 e8 03 <8a> 04 10 84 c0 0f 85 85 0c 00 00 80 3b 00 0f 84 6b 0c 00 00 48 8b RSP: 0018:ffff888035407750 EFLAGS: 00010202 RAX: 0000000000000034 RBX: 00000000000001a0 RCX: 0000000000000000 RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff88805c417098 RBP: ffff8880354077b0 R08: dffffc0000000000 R09: ffffed100b975718 R10: 0000000000000001 R11: ffffffff949ea4a3 R12: 1ffff1100b975746 R13: dffffc0000000000 R14: ffff88805cba4588 R15: dffffc0000000000 FS: 0000794a78e91b80(0000) GS:ffff888068d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007bd5283ccf58 CR3: 000000004b7aa000 CR4: 00000000001006e0 Call Trace: ? dpm_complete+0x67b/0x67b ? i915_gem_suspend+0x14d/0x1ad sst_soc_prepare+0x91/0x1dd ? sst_be_hw_params+0x7e/0x7e dpm_prepare+0x39a/0x88b dpm_suspend_start+0x13/0x9d suspend_devices_and_enter+0x18f/0xbd7 ? arch_suspend_enable_irqs+0x11/0x11 ? printk+0xd9/0x12d ? lock_release+0x95f/0x95f ? log_buf_vmcoreinfo_setup+0x131/0x131 ? rcu_read_lock_sched_held+0x140/0x22a ? __bpf_trace_rcu_utilization+0xa/0xa ? __pm_pr_dbg+0x186/0x190 ? pm_notifier_call_chain+0x39/0x39 ? suspend_test+0x9d/0x9d pm_suspend+0x2f4/0x728 ? trace_suspend_resume+0x3da/0x3da ? lock_release+0x95f/0x95f ? kernfs_fop_write+0x19f/0x32d state_store+0xd8/0x147 ? sysfs_kf_read+0x155/0x155 kernfs_fop_write+0x23e/0x32d __vfs_write+0x108/0x608 ? vfs_read+0x2e9/0x2e9 ? rcu_read_lock_sched_held+0x140/0x22a ? __bpf_trace_rcu_utilization+0xa/0xa ? debug_smp_processor_id+0x10/0x10 ? selinux_file_permission+0x1c5/0x3c8 ? rcu_sync_lockdep_assert+0x6a/0xad ? __sb_start_write+0x129/0x2ac vfs_write+0x1aa/0x434 ksys_write+0xfe/0x1be ? __ia32_sys_read+0x82/0x82 do_syscall_64+0xcd/0x120 entry_SYSCALL_64_after_hwframe+0x49/0xbe In the observed situation, the problem is seen because the codec driver failed to probe due to a hardware problem. max98090 i2c-193C9890:00: Failed to read device revision: -1 max98090 i2c-193C9890:00: ASoC: failed to probe component -1 cht-bsw-max98090 cht-bsw-max98090: ASoC: failed to instantiate card -1 cht-bsw-max98090 cht-bsw-max98090: snd_soc_register_card failed -1 cht-bsw-max98090: probe of cht-bsw-max98090 failed with error -1 The problem is similar to the problem solved with commit 2fc995a ("ASoC: intel: Fix crash at suspend/resume without card registration"), but codec registration fails at a later point. At that time, the pointer checked with the above mentioned commit is already set, but it is not cleared if the device is subsequently removed. Adding a remove function to clear the pointer fixes the problem. Cc: [email protected] Cc: Jarkko Nikula <[email protected]> Cc: Curtis Malainey <[email protected]> Signed-off-by: Guenter Roeck <[email protected]> Acked-by: Pierre-Louis Bossart <[email protected]> Signed-off-by: Mark Brown <[email protected]> (cherry picked from commit 8f71370)

Paul E. McKenney reported [1] that commit 1f0723a ("mm, slub: enable slub_debug static key when creating cache with explicit debug flags") results in the lockdep complaint: ====================================================== WARNING: possible circular locking dependency detected 5.12.0+ thesofproject#15 Not tainted ------------------------------------------------------ rcu_torture_sta/109 is trying to acquire lock: ffffffff96063cd0 (cpu_hotplug_lock){++++}-{0:0}, at: static_key_enable+0x9/0x20 but task is already holding lock: ffffffff96173c28 (slab_mutex){+.+.}-{3:3}, at: kmem_cache_create_usercopy+0x2d/0x250 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> thesofproject#1 (slab_mutex){+.+.}-{3:3}: lock_acquire+0xb9/0x3a0 __mutex_lock+0x8d/0x920 slub_cpu_dead+0x15/0xf0 cpuhp_invoke_callback+0x17a/0x7c0 cpuhp_invoke_callback_range+0x3b/0x80 _cpu_down+0xdf/0x2a0 cpu_down+0x2c/0x50 device_offline+0x82/0xb0 remove_cpu+0x1a/0x30 torture_offline+0x80/0x140 torture_onoff+0x147/0x260 kthread+0x10a/0x140 ret_from_fork+0x22/0x30 -> #0 (cpu_hotplug_lock){++++}-{0:0}: check_prev_add+0x8f/0xbf0 __lock_acquire+0x13f0/0x1d80 lock_acquire+0xb9/0x3a0 cpus_read_lock+0x21/0xa0 static_key_enable+0x9/0x20 __kmem_cache_create+0x38d/0x430 kmem_cache_create_usercopy+0x146/0x250 kmem_cache_create+0xd/0x10 rcu_torture_stats+0x79/0x280 kthread+0x10a/0x140 ret_from_fork+0x22/0x30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(slab_mutex); lock(cpu_hotplug_lock); lock(slab_mutex); lock(cpu_hotplug_lock); *** DEADLOCK *** 1 lock held by rcu_torture_sta/109: #0: ffffffff96173c28 (slab_mutex){+.+.}-{3:3}, at: kmem_cache_create_usercopy+0x2d/0x250 stack backtrace: CPU: 3 PID: 109 Comm: rcu_torture_sta Not tainted 5.12.0+ thesofproject#15 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: dump_stack+0x6d/0x89 check_noncircular+0xfe/0x110 ? lock_is_held_type+0x98/0x110 check_prev_add+0x8f/0xbf0 __lock_acquire+0x13f0/0x1d80 lock_acquire+0xb9/0x3a0 ? static_key_enable+0x9/0x20 ? mark_held_locks+0x49/0x70 cpus_read_lock+0x21/0xa0 ? static_key_enable+0x9/0x20 static_key_enable+0x9/0x20 __kmem_cache_create+0x38d/0x430 kmem_cache_create_usercopy+0x146/0x250 ? rcu_torture_stats_print+0xd0/0xd0 kmem_cache_create+0xd/0x10 rcu_torture_stats+0x79/0x280 ? rcu_torture_stats_print+0xd0/0xd0 kthread+0x10a/0x140 ? kthread_park+0x80/0x80 ret_from_fork+0x22/0x30 This is because there's one order of locking from the hotplug callbacks: lock(cpu_hotplug_lock); // from hotplug machinery itself lock(slab_mutex); // in e.g. slab_mem_going_offline_callback() And commit 1f0723a made the reverse sequence possible: lock(slab_mutex); // in kmem_cache_create_usercopy() lock(cpu_hotplug_lock); // kmem_cache_open() -> static_key_enable() The simplest fix is to move static_key_enable() to a place before slab_mutex is taken. That means kmem_cache_create_usercopy() in mm/slab_common.c which is not ideal for SLUB-specific code, but the #ifdef CONFIG_SLUB_DEBUG makes it at least self-contained and obvious. [1] https://lore.kernel.org/lkml/20210502171827.GA3670492@paulmck-ThinkPad-P17-Gen-1/ Link: https://lkml.kernel.org/r/[email protected] Fixes: 1f0723a ("mm, slub: enable slub_debug static key when creating cache with explicit debug flags") Signed-off-by: Vlastimil Babka <[email protected]> Reported-by: Paul E. McKenney <[email protected]> Tested-by: Paul E. McKenney <[email protected]> Acked-by: David Rientjes <[email protected]> Cc: Christoph Lameter <[email protected]> Cc: Pekka Enberg <[email protected]> Cc: Joonsoo Kim <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>

ASan reports a heap-buffer-overflow in elf_sec__is_text when using perf-top. The bug is caused by the fact that secstrs is built from runtime_ss, while shdr is built from syms_ss if shdr.sh_type != SHT_NOBITS. Therefore, they point to two different ELF files. This patch renames secstrs to secstrs_run and adds secstrs_sym, so that the correct secstrs is chosen depending on shdr.sh_type. $ ASAN_OPTIONS=abort_on_error=1:disable_coredump=0:unmap_shadow_on_exit=1 ./perf top ================================================================= ==363148==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x61300009add6 at pc 0x00000049875c bp 0x7f4f56446440 sp 0x7f4f56445bf0 READ of size 1 at 0x61300009add6 thread T6 #0 0x49875b in StrstrCheck(void*, char*, char const*, char const*) (/home/user/linux/tools/perf/perf+0x49875b) #1 0x4d13a2 in strstr (/home/user/linux/tools/perf/perf+0x4d13a2) #2 0xacae36 in elf_sec__is_text /home/user/linux/tools/perf/util/symbol-elf.c:176:9 #3 0xac3ec9 in elf_sec__filter /home/user/linux/tools/perf/util/symbol-elf.c:187:9 #4 0xac2c3d in dso__load_sym /home/user/linux/tools/perf/util/symbol-elf.c:1254:20 thesofproject#5 0x883981 in dso__load /home/user/linux/tools/perf/util/symbol.c:1897:9 thesofproject#6 0x8e6248 in map__load /home/user/linux/tools/perf/util/map.c:332:7 thesofproject#7 0x8e66e5 in map__find_symbol /home/user/linux/tools/perf/util/map.c:366:6 thesofproject#8 0x7f8278 in machine__resolve /home/user/linux/tools/perf/util/event.c:707:13 thesofproject#9 0x5f3d1a in perf_event__process_sample /home/user/linux/tools/perf/builtin-top.c:773:6 thesofproject#10 0x5f30e4 in deliver_event /home/user/linux/tools/perf/builtin-top.c:1197:3 thesofproject#11 0x908a72 in do_flush /home/user/linux/tools/perf/util/ordered-events.c:244:9 thesofproject#12 0x905fae in __ordered_events__flush /home/user/linux/tools/perf/util/ordered-events.c:323:8 thesofproject#13 0x9058db in ordered_events__flush /home/user/linux/tools/perf/util/ordered-events.c:341:9 thesofproject#14 0x5f19b1 in process_thread /home/user/linux/tools/perf/builtin-top.c:1109:7 thesofproject#15 0x7f4f6a21a298 in start_thread /usr/src/debug/glibc-2.33-16.fc34.x86_64/nptl/pthread_create.c:481:8 thesofproject#16 0x7f4f697d0352 in clone ../sysdeps/unix/sysv/linux/x86_64/clone.S:95 0x61300009add6 is located 10 bytes to the right of 332-byte region [0x61300009ac80,0x61300009adcc) allocated by thread T6 here: #0 0x4f3f7f in malloc (/home/user/linux/tools/perf/perf+0x4f3f7f) #1 0x7f4f6a0a88d9 (/lib64/libelf.so.1+0xa8d9) Thread T6 created by T0 here: #0 0x464856 in pthread_create (/home/user/linux/tools/perf/perf+0x464856) #1 0x5f06e0 in __cmd_top /home/user/linux/tools/perf/builtin-top.c:1309:6 #2 0x5ef19f in cmd_top /home/user/linux/tools/perf/builtin-top.c:1762:11 #3 0x7b28c0 in run_builtin /home/user/linux/tools/perf/perf.c:313:11 #4 0x7b119f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8 thesofproject#5 0x7b2423 in run_argv /home/user/linux/tools/perf/perf.c:409:2 thesofproject#6 0x7b0c19 in main /home/user/linux/tools/perf/perf.c:539:3 thesofproject#7 0x7f4f696f7b74 in __libc_start_main /usr/src/debug/glibc-2.33-16.fc34.x86_64/csu/../csu/libc-start.c:332:16 SUMMARY: AddressSanitizer: heap-buffer-overflow (/home/user/linux/tools/perf/perf+0x49875b) in StrstrCheck(void*, char*, char const*, char const*) Shadow bytes around the buggy address: 0x0c268000b560: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c268000b570: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c268000b580: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c268000b590: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0c268000b5a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 =>0x0c268000b5b0: 00 00 00 00 00 00 00 00 00 04[fa]fa fa fa fa fa 0x0c268000b5c0: fa fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00 0x0c268000b5d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0c268000b5e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0c268000b5f0: 07 fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c268000b600: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd Shadow byte legend (one shadow byte represents 8 application bytes): Addressable: 00 Partially addressable: 01 02 03 04 05 06 07 Heap left redzone: fa Freed heap region: fd Stack left redzone: f1 Stack mid redzone: f2 Stack right redzone: f3 Stack after return: f5 Stack use after scope: f8 Global redzone: f9 Global init order: f6 Poisoned by user: f7 Container overflow: fc Array cookie: ac Intra object redzone: bb ASan internal: fe Left alloca redzone: ca Right alloca redzone: cb Shadow gap: cc ==363148==ABORTING Suggested-by: Jiri Slaby <[email protected]> Signed-off-by: Riccardo Mancini <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Fabian Hemmer <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Jiri Slaby <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Remi Bernon <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

It's later supposed to be either a correct address or NULL. Without the initialization, it may contain an undefined value which results in the following segmentation fault: # perf top --sort comm -g --ignore-callees=do_idle terminates with: #0 0x00007ffff56b7685 in __strlen_avx2 () from /lib64/libc.so.6 thesofproject#1 0x00007ffff55e3802 in strdup () from /lib64/libc.so.6 thesofproject#2 0x00005555558cb139 in hist_entry__init (callchain_size=<optimized out>, sample_self=true, template=0x7fffde7fb110, he=0x7fffd801c250) at util/hist.c:489 thesofproject#3 hist_entry__new (template=template@entry=0x7fffde7fb110, sample_self=sample_self@entry=true) at util/hist.c:564 thesofproject#4 0x00005555558cb4ba in hists__findnew_entry (hists=hists@entry=0x5555561d9e38, entry=entry@entry=0x7fffde7fb110, al=al@entry=0x7fffde7fb420, sample_self=sample_self@entry=true) at util/hist.c:657 thesofproject#5 0x00005555558cba1b in __hists__add_entry (hists=hists@entry=0x5555561d9e38, al=0x7fffde7fb420, sym_parent=<optimized out>, bi=bi@entry=0x0, mi=mi@entry=0x0, sample=sample@entry=0x7fffde7fb4b0, sample_self=true, ops=0x0, block_info=0x0) at util/hist.c:288 thesofproject#6 0x00005555558cbb70 in hists__add_entry (sample_self=true, sample=0x7fffde7fb4b0, mi=0x0, bi=0x0, sym_parent=<optimized out>, al=<optimized out>, hists=0x5555561d9e38) at util/hist.c:1056 thesofproject#7 iter_add_single_cumulative_entry (iter=0x7fffde7fb460, al=<optimized out>) at util/hist.c:1056 thesofproject#8 0x00005555558cc8a4 in hist_entry_iter__add (iter=iter@entry=0x7fffde7fb460, al=al@entry=0x7fffde7fb420, max_stack_depth=<optimized out>, arg=arg@entry=0x7fffffff7db0) at util/hist.c:1231 thesofproject#9 0x00005555557cdc9a in perf_event__process_sample (machine=<optimized out>, sample=0x7fffde7fb4b0, evsel=<optimized out>, event=<optimized out>, tool=0x7fffffff7db0) at builtin-top.c:842 thesofproject#10 deliver_event (qe=<optimized out>, qevent=<optimized out>) at builtin-top.c:1202 thesofproject#11 0x00005555558a9318 in do_flush (show_progress=false, oe=0x7fffffff80e0) at util/ordered-events.c:244 thesofproject#12 __ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP, timestamp=timestamp@entry=0) at util/ordered-events.c:323 thesofproject#13 0x00005555558a9789 in __ordered_events__flush (timestamp=<optimized out>, how=<optimized out>, oe=<optimized out>) at util/ordered-events.c:339 thesofproject#14 ordered_events__flush (how=OE_FLUSH__TOP, oe=0x7fffffff80e0) at util/ordered-events.c:341 thesofproject#15 ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP) at util/ordered-events.c:339 thesofproject#16 0x00005555557cd631 in process_thread (arg=0x7fffffff7db0) at builtin-top.c:1114 thesofproject#17 0x00007ffff7bb817a in start_thread () from /lib64/libpthread.so.0 thesofproject#18 0x00007ffff5656dc3 in clone () from /lib64/libc.so.6 If you look at the frame thesofproject#2, the code is: 488 if (he->srcline) { 489 he->srcline = strdup(he->srcline); 490 if (he->srcline == NULL) 491 goto err_rawdata; 492 } If he->srcline is not NULL (it is not NULL if it is uninitialized rubbish), it gets strdupped and strdupping a rubbish random string causes the problem. Also, if you look at the commit 1fb7d06, it adds the srcline property into the struct, but not initializing it everywhere needed. Committer notes: Now I see, when using --ignore-callees=do_idle we end up here at line 2189 in add_callchain_ip(): 2181 if (al.sym != NULL) { 2182 if (perf_hpp_list.parent && !*parent && 2183 symbol__match_regex(al.sym, &parent_regex)) 2184 *parent = al.sym; 2185 else if (have_ignore_callees && root_al && 2186 symbol__match_regex(al.sym, &ignore_callees_regex)) { 2187 /* Treat this symbol as the root, 2188 forgetting its callees. */ 2189 *root_al = al; 2190 callchain_cursor_reset(cursor); 2191 } 2192 } And the al that doesn't have the ->srcline field initialized will be copied to the root_al, so then, back to: 1211 int hist_entry_iter__add(struct hist_entry_iter *iter, struct addr_location *al, 1212 int max_stack_depth, void *arg) 1213 { 1214 int err, err2; 1215 struct map *alm = NULL; 1216 1217 if (al) 1218 alm = map__get(al->map); 1219 1220 err = sample__resolve_callchain(iter->sample, &callchain_cursor, &iter->parent, 1221 iter->evsel, al, max_stack_depth); 1222 if (err) { 1223 map__put(alm); 1224 return err; 1225 } 1226 1227 err = iter->ops->prepare_entry(iter, al); 1228 if (err) 1229 goto out; 1230 1231 err = iter->ops->add_single_entry(iter, al); 1232 if (err) 1233 goto out; 1234 That al at line 1221 is what hist_entry_iter__add() (called from sample__resolve_callchain()) saw as 'root_al', and then: iter->ops->add_single_entry(iter, al); will go on with al->srcline with a bogus value, I'll add the above sequence to the cset and apply, thanks! Signed-off-by: Michael Petlan <[email protected]> CC: Milian Wolff <[email protected]> Cc: Jiri Olsa <[email protected]> Fixes: 1fb7d06 ("perf report Use srcline from callchain for hist entries") Link: https //lore.kernel.org/r/[email protected] Reported-by: Juri Lelli <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

This reverts commit aae74ff, since it prevents my AMD Milan system from booting, with: [ 27.189558] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 27.197506] #PF: supervisor write access in kernel mode [ 27.203333] #PF: error_code(0x0002) - not-present page [ 27.209064] PGD 0 P4D 0 [ 27.211885] Oops: 0002 [#1] PREEMPT SMP NOPTI [ 27.216744] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.15.0-rc6+ thesofproject#15 [ 27.223928] Hardware name: AMD Corporation ETHANOL_X/ETHANOL_X, BIOS RXM1006B 08/20/2021 [ 27.232955] RIP: 0010:run_timer_softirq+0x38b/0x4a0 [ 27.238397] Code: 4c 89 f7 e8 37 27 ac 00 49 c7 46 08 00 00 00 00 49 8b 04 24 48 85 c0 74 71 4d 8b 3c 24 4d 89 7e 08 66 90 49 8b 07 49 8b 57 08 <48> 89 02 48 85 c0 74 04 48 89 50 08 49 8b 77 18 41 f6 47 22 20 4c [ 27.259350] RSP: 0018:ffffc42d00003ee8 EFLAGS: 00010086 [ 27.265176] RAX: dead000000000122 RBX: 0000000000000000 RCX: 0000000000000101 [ 27.273134] RDX: 0000000000000000 RSI: 0000000000000087 RDI: 0000000000000001 [ 27.281084] RBP: ffffc42d00003f70 R08: 0000000000000000 R09: 00000000000003eb [ 27.289043] R10: ffffa0860cb300d0 R11: ffffa0c44de290b0 R12: ffffc42d00003ef8 [ 27.297002] R13: 00000000fffef200 R14: ffffa0c44de18dc0 R15: ffffa0867a882350 [ 27.304961] FS: 0000000000000000(0000) GS:ffffa0c44de00000(0000) knlGS:0000000000000000 [ 27.313988] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 27.320396] CR2: 0000000000000000 CR3: 000000014569c001 CR4: 0000000000770ef0 [ 27.328346] PKRU: 55555554 [ 27.331359] Call Trace: [ 27.334073] <IRQ> [ 27.336314] ? __queue_work+0x420/0x420 [ 27.340589] ? lapic_next_event+0x21/0x30 [ 27.345060] ? clockevents_program_event+0x8f/0xe0 [ 27.350402] __do_softirq+0xfb/0x2db [ 27.354388] irq_exit_rcu+0x98/0xd0 [ 27.358275] sysvec_apic_timer_interrupt+0xac/0xd0 [ 27.363620] </IRQ> [ 27.365955] asm_sysvec_apic_timer_interrupt+0x12/0x20 [ 27.371685] RIP: 0010:cpuidle_enter_state+0xcc/0x390 [ 27.377292] Code: 3d 01 79 0a 50 e8 44 ed 77 ff 49 89 c6 0f 1f 44 00 00 31 ff e8 f5 f8 77 ff 80 7d d7 00 0f 85 e6 01 00 00 fb 66 0f 1f 44 00 00 <45> 85 ff 0f 88 17 01 00 00 49 63 c7 4c 2b 75 c8 48 8d 14 40 48 8d [ 27.398243] RSP: 0018:ffffffffb0e03dc8 EFLAGS: 00000246 [ 27.404069] RAX: ffffa0c44de00000 RBX: 0000000000000001 RCX: 000000000000001f [ 27.412028] RDX: 0000000000000000 RSI: ffffffffb0bafc1f RDI: ffffffffb0bbdb81 [ 27.419986] RBP: ffffffffb0e03e00 R08: 00000006549f8f3f R09: ffffffffb1065200 [ 27.427935] R10: ffffa0c44de27ae4 R11: ffffa0c44de27ac4 R12: ffffa0c5634cb000 [ 27.435894] R13: ffffffffb1065200 R14: 00000006549f8f3f R15: 0000000000000001 [ 27.443854] ? cpuidle_enter_state+0xbb/0x390 [ 27.448712] cpuidle_enter+0x2e/0x40 [ 27.452695] call_cpuidle+0x23/0x40 [ 27.456584] do_idle+0x1f0/0x270 [ 27.460181] cpu_startup_entry+0x20/0x30 [ 27.464553] rest_init+0xd4/0xe0 [ 27.468149] arch_call_rest_init+0xe/0x1b [ 27.472619] start_kernel+0x6bc/0x6e2 [ 27.476764] x86_64_start_reservations+0x24/0x26 [ 27.481912] x86_64_start_kernel+0x75/0x79 [ 27.486477] secondary_startup_64_no_verify+0xb0/0xbb [ 27.492111] Modules linked in: kvm_amd(+) kvm ipmi_si(+) ipmi_devintf rapl wmi_bmof ipmi_msghandler input_leds ccp k10temp mac_hid sch_fq_codel msr ip_tables x_tables autofs4 btrfs blake2b_generic zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear ast i2c_algo_bit drm_vram_helper drm_ttm_helper ttm drm_kms_helper crct10dif_pclmul crc32_pclmul ghash_clmulni_intel syscopyarea aesni_intel sysfillrect crypto_simd sysimgblt fb_sys_fops cryptd hid_generic cec nvme ahci usbhid drm e1000e nvme_core hid libahci i2c_piix4 wmi [ 27.551789] CR2: 0000000000000000 [ 27.555482] ---[ end trace 897987dfe93dccc6 ]--- [ 27.560630] RIP: 0010:run_timer_softirq+0x38b/0x4a0 [ 27.566069] Code: 4c 89 f7 e8 37 27 ac 00 49 c7 46 08 00 00 00 00 49 8b 04 24 48 85 c0 74 71 4d 8b 3c 24 4d 89 7e 08 66 90 49 8b 07 49 8b 57 08 <48> 89 02 48 85 c0 74 04 48 89 50 08 49 8b 77 18 41 f6 47 22 20 4c [ 27.587021] RSP: 0018:ffffc42d00003ee8 EFLAGS: 00010086 [ 27.592848] RAX: dead000000000122 RBX: 0000000000000000 RCX: 0000000000000101 [ 27.600808] RDX: 0000000000000000 RSI: 0000000000000087 RDI: 0000000000000001 [ 27.608765] RBP: ffffc42d00003f70 R08: 0000000000000000 R09: 00000000000003eb [ 27.616716] R10: ffffa0860cb300d0 R11: ffffa0c44de290b0 R12: ffffc42d00003ef8 [ 27.624673] R13: 00000000fffef200 R14: ffffa0c44de18dc0 R15: ffffa0867a882350 [ 27.632624] FS: 0000000000000000(0000) GS:ffffa0c44de00000(0000) knlGS:0000000000000000 [ 27.641650] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 27.648159] CR2: 0000000000000000 CR3: 000000014569c001 CR4: 0000000000770ef0 [ 27.656119] PKRU: 55555554 [ 27.659133] Kernel panic - not syncing: Fatal exception in interrupt [ 29.030411] Shutting down cpus with NMI [ 29.034699] Kernel Offset: 0x2e600000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 29.046790] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Since unreliable, found by bisecting for KASAN's use-after-free in enqueue_timer+0x4f/0x1e0, where the timer callback is called. Reported-by: Kim Phillips <[email protected]> Signed-off-by: Kim Phillips <[email protected]> Fixes: aae74ff ("drm/ast: Add detect function support") Link: https://lore.kernel.org/lkml/[email protected]/ Cc: Ainux <[email protected]> Cc: Thomas Zimmermann <[email protected]> Cc: David Airlie <[email protected]> Cc: David Airlie <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: [email protected] Cc: [email protected] Cc: Chuck Lever III <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Jon Grimm <[email protected]> Cc: dri-devel <[email protected]> Cc: linux-kernel <[email protected]> Signed-off-by: Dave Airlie <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

The exit function fixes a memory leak with the src field as detected by leak sanitizer. An example of which is: Indirect leak of 25133184 byte(s) in 207 object(s) allocated from: #0 0x7f199ecfe987 in __interceptor_calloc libsanitizer/asan/asan_malloc_linux.cpp:154 thesofproject#1 0x55defe638224 in annotated_source__alloc_histograms util/annotate.c:803 thesofproject#2 0x55defe6397e4 in symbol__hists util/annotate.c:952 thesofproject#3 0x55defe639908 in symbol__inc_addr_samples util/annotate.c:968 thesofproject#4 0x55defe63aa29 in hist_entry__inc_addr_samples util/annotate.c:1119 thesofproject#5 0x55defe499a79 in hist_iter__report_callback tools/perf/builtin-report.c:182 thesofproject#6 0x55defe7a859d in hist_entry_iter__add util/hist.c:1236 thesofproject#7 0x55defe49aa63 in process_sample_event tools/perf/builtin-report.c:315 thesofproject#8 0x55defe731bc8 in evlist__deliver_sample util/session.c:1473 thesofproject#9 0x55defe731e38 in machines__deliver_event util/session.c:1510 thesofproject#10 0x55defe732a23 in perf_session__deliver_event util/session.c:1590 thesofproject#11 0x55defe72951e in ordered_events__deliver_event util/session.c:183 thesofproject#12 0x55defe740082 in do_flush util/ordered-events.c:244 thesofproject#13 0x55defe7407cb in __ordered_events__flush util/ordered-events.c:323 thesofproject#14 0x55defe740a61 in ordered_events__flush util/ordered-events.c:341 thesofproject#15 0x55defe73837f in __perf_session__process_events util/session.c:2390 thesofproject#16 0x55defe7385ff in perf_session__process_events util/session.c:2420 ... Signed-off-by: Ian Rogers <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Martin Liška <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

commit 0622cab ("bonding: fix 802.3ad aggregator reselection"), resolve case, when there is several aggregation groups in the same bond. bond_3ad_unbind_slave will invalidate (clear) aggregator when __agg_active_ports return zero. So, ad_clear_agg can be executed even, when num_of_ports!=0. Than bond_3ad_unbind_slave can be executed again for, previously cleared aggregator. NOTE: at this time bond_3ad_unbind_slave will not update slave ports list, because lag_ports==NULL. So, here we got slave ports, pointing to freed aggregator memory. Fix with checking actual number of ports in group (as was before commit 0622cab ("bonding: fix 802.3ad aggregator reselection") ), before ad_clear_agg(). The KASAN logs are as follows: [ 767.617392] ================================================================== [ 767.630776] BUG: KASAN: use-after-free in bond_3ad_state_machine_handler+0x13dc/0x1470 [ 767.638764] Read of size 2 at addr ffff00011ba9d430 by task kworker/u8:7/767 [ 767.647361] CPU: 3 PID: 767 Comm: kworker/u8:7 Tainted: G O 5.15.11 #15 [ 767.655329] Hardware name: DNI AmazonGo1 A7040 board (DT) [ 767.660760] Workqueue: lacp_1 bond_3ad_state_machine_handler [ 767.666468] Call trace: [ 767.668930] dump_backtrace+0x0/0x2d0 [ 767.672625] show_stack+0x24/0x30 [ 767.675965] dump_stack_lvl+0x68/0x84 [ 767.679659] print_address_description.constprop.0+0x74/0x2b8 [ 767.685451] kasan_report+0x1f0/0x260 [ 767.689148] __asan_load2+0x94/0xd0 [ 767.692667] bond_3ad_state_machine_handler+0x13dc/0x1470 Fixes: 0622cab ("bonding: fix 802.3ad aggregator reselection") Co-developed-by: Maksym Glubokiy <[email protected]> Signed-off-by: Maksym Glubokiy <[email protected]> Signed-off-by: Yevhen Orlov <[email protected]> Acked-by: Jay Vosburgh <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

commit 4bb26f2 upstream. When inode is created and written to using direct IO, there is nothing to clear the EXT4_STATE_MAY_INLINE_DATA flag. Thus when inode gets truncated later to say 1 byte and written using normal write, we will try to store the data as inline data. This confuses the code later because the inode now has both normal block and inline data allocated and the confusion manifests for example as: kernel BUG at fs/ext4/inode.c:2721! invalid opcode: 0000 [thesofproject#1] PREEMPT SMP KASAN CPU: 0 PID: 359 Comm: repro Not tainted 5.19.0-rc8-00001-g31ba1e3b8305-dirty thesofproject#15 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014 RIP: 0010:ext4_writepages+0x363d/0x3660 RSP: 0018:ffffc90000ccf260 EFLAGS: 00010293 RAX: ffffffff81e1abcd RBX: 0000008000000000 RCX: ffff88810842a180 RDX: 0000000000000000 RSI: 0000008000000000 RDI: 0000000000000000 RBP: ffffc90000ccf650 R08: ffffffff81e17d58 R09: ffffed10222c680b R10: dfffe910222c680c R11: 1ffff110222c680a R12: ffff888111634128 R13: ffffc90000ccf880 R14: 0000008410000000 R15: 0000000000000001 FS: 00007f72635d2640(0000) GS:ffff88811b000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000565243379180 CR3: 000000010aa74000 CR4: 0000000000150eb0 Call Trace: <TASK> do_writepages+0x397/0x640 filemap_fdatawrite_wbc+0x151/0x1b0 file_write_and_wait_range+0x1c9/0x2b0 ext4_sync_file+0x19e/0xa00 vfs_fsync_range+0x17b/0x190 ext4_buffered_write_iter+0x488/0x530 ext4_file_write_iter+0x449/0x1b90 vfs_write+0xbcd/0xf40 ksys_write+0x198/0x2c0 __x64_sys_write+0x7b/0x90 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK> Fix the problem by clearing EXT4_STATE_MAY_INLINE_DATA when we are doing direct IO write to a file. Cc: [email protected] Reported-by: Tadeusz Struk <[email protected]> Reported-by: [email protected] Link: https://syzkaller.appspot.com/bug?id=a1e89d09bbbcbd5c4cb45db230ee28c822953984 Signed-off-by: Jan Kara <[email protected]> Reviewed-by: Lukas Czerner <[email protected]> Tested-by: Tadeusz Struk<[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

We need to check if we have a OS prefix, otherwise we stumble on a metric segv that I'm now seeing in Arnaldo's tree: $ gdb --args perf stat -M Backend true ... Performance counter stats for 'true': 4,712,355 TOPDOWN.SLOTS # 17.3 % tma_core_bound Program received signal SIGSEGV, Segmentation fault. __strlen_evex () at ../sysdeps/x86_64/multiarch/strlen-evex.S:77 77 ../sysdeps/x86_64/multiarch/strlen-evex.S: No such file or directory. (gdb) bt #0 __strlen_evex () at ../sysdeps/x86_64/multiarch/strlen-evex.S:77 thesofproject#1 0x00007ffff74749a5 in __GI__IO_fputs (str=0x0, fp=0x7ffff75f5680 <_IO_2_1_stderr_>) thesofproject#2 0x0000555555779f28 in do_new_line_std (config=0x555555e077c0 <stat_config>, os=0x7fffffffbf10) at util/stat-display.c:356 thesofproject#3 0x000055555577a081 in print_metric_std (config=0x555555e077c0 <stat_config>, ctx=0x7fffffffbf10, color=0x0, fmt=0x5555558b77b5 "%8.1f", unit=0x7fffffffbb10 "% tma_memory_bound", val=13.165355724442199) at util/stat-display.c:380 thesofproject#4 0x00005555557768b6 in generic_metric (config=0x555555e077c0 <stat_config>, metric_expr=0x55555593d5b7 "((CYCLE_ACTIVITY.STALLS_MEM_ANY + EXE_ACTIVITY.BOUND_ON_STORES) / (CYCLE_ACTIVITY.STALLS_TOTAL + (EXE_ACTIVITY.1_PORTS_UTIL + tma_retiring * EXE_ACTIVITY.2_PORTS_UTIL) + EXE_ACTIVITY.BOUND_ON_STORES))"..., metric_events=0x555555f334e0, metric_refs=0x555555ec81d0, name=0x555555f32e80 "TOPDOWN.SLOTS", metric_name=0x555555f26c80 "tma_memory_bound", metric_unit=0x55555593d5b1 "100%", runtime=0, map_idx=0, out=0x7fffffffbd90, st=0x555555e9e620 <rt_stat>) at util/stat-shadow.c:934 thesofproject#5 0x0000555555778cac in perf_stat__print_shadow_stats (config=0x555555e077c0 <stat_config>, evsel=0x555555f289d0, avg=4712355, map_idx=0, out=0x7fffffffbd90, metric_events=0x555555e078e8 <stat_config+296>, st=0x555555e9e620 <rt_stat>) at util/stat-shadow.c:1329 thesofproject#6 0x000055555577b6a0 in printout (config=0x555555e077c0 <stat_config>, os=0x7fffffffbf10, uval=4712355, run=325322, ena=325322, noise=4712355, map_idx=0) at util/stat-display.c:741 thesofproject#7 0x000055555577bc74 in print_counter_aggrdata (config=0x555555e077c0 <stat_config>, counter=0x555555f289d0, s=0, os=0x7fffffffbf10) at util/stat-display.c:838 thesofproject#8 0x000055555577c1d8 in print_counter (config=0x555555e077c0 <stat_config>, counter=0x555555f289d0, os=0x7fffffffbf10) at util/stat-display.c:957 thesofproject#9 0x000055555577dba0 in evlist__print_counters (evlist=0x555555ec3610, config=0x555555e077c0 <stat_config>, _target=0x555555e01c80 <target>, ts=0x0, argc=1, argv=0x7fffffffe450) at util/stat-display.c:1413 thesofproject#10 0x00005555555fc821 in print_counters (ts=0x0, argc=1, argv=0x7fffffffe450) at builtin-stat.c:1040 thesofproject#11 0x000055555560091a in cmd_stat (argc=1, argv=0x7fffffffe450) at builtin-stat.c:2665 thesofproject#12 0x00005555556b1eea in run_builtin (p=0x555555e11f70 <commands+336>, argc=4, argv=0x7fffffffe450) at perf.c:322 thesofproject#13 0x00005555556b2181 in handle_internal_command (argc=4, argv=0x7fffffffe450) at perf.c:376 thesofproject#14 0x00005555556b22d7 in run_argv (argcp=0x7fffffffe27c, argv=0x7fffffffe270) at perf.c:420 thesofproject#15 0x00005555556b26ef in main (argc=4, argv=0x7fffffffe450) at perf.c:550 (gdb) Fixes: f123b2d ("perf stat: Remove prefix argument in print_metric_headers()") Signed-off-by: Ian Rogers <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Athira Jajeev <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Xing Zhengjun <[email protected]> Link: http://lore.kernel.org/lkml/CAP-5=fUOjSM5HajU9TCD6prY39LbX4OQbkEbtKPPGRBPBN=_VQ@mail.gmail.com Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

[ Upstream commit 93c660c ] ASAN reports an use-after-free in btf_dump_name_dups: ERROR: AddressSanitizer: heap-use-after-free on address 0xffff927006db at pc 0xaaaab5dfb618 bp 0xffffdd89b890 sp 0xffffdd89b928 READ of size 2 at 0xffff927006db thread T0 #0 0xaaaab5dfb614 in __interceptor_strcmp.part.0 (test_progs+0x21b614) thesofproject#1 0xaaaab635f144 in str_equal_fn tools/lib/bpf/btf_dump.c:127 thesofproject#2 0xaaaab635e3e0 in hashmap_find_entry tools/lib/bpf/hashmap.c:143 thesofproject#3 0xaaaab635e72c in hashmap__find tools/lib/bpf/hashmap.c:212 thesofproject#4 0xaaaab6362258 in btf_dump_name_dups tools/lib/bpf/btf_dump.c:1525 thesofproject#5 0xaaaab636240c in btf_dump_resolve_name tools/lib/bpf/btf_dump.c:1552 thesofproject#6 0xaaaab6362598 in btf_dump_type_name tools/lib/bpf/btf_dump.c:1567 thesofproject#7 0xaaaab6360b48 in btf_dump_emit_struct_def tools/lib/bpf/btf_dump.c:912 thesofproject#8 0xaaaab6360630 in btf_dump_emit_type tools/lib/bpf/btf_dump.c:798 thesofproject#9 0xaaaab635f720 in btf_dump__dump_type tools/lib/bpf/btf_dump.c:282 thesofproject#10 0xaaaab608523c in test_btf_dump_incremental tools/testing/selftests/bpf/prog_tests/btf_dump.c:236 thesofproject#11 0xaaaab6097530 in test_btf_dump tools/testing/selftests/bpf/prog_tests/btf_dump.c:875 thesofproject#12 0xaaaab6314ed0 in run_one_test tools/testing/selftests/bpf/test_progs.c:1062 thesofproject#13 0xaaaab631a0a8 in main tools/testing/selftests/bpf/test_progs.c:1697 thesofproject#14 0xffff9676d214 in __libc_start_main ../csu/libc-start.c:308 thesofproject#15 0xaaaab5d65990 (test_progs+0x185990) 0xffff927006db is located 11 bytes inside of 16-byte region [0xffff927006d0,0xffff927006e0) freed by thread T0 here: #0 0xaaaab5e2c7c4 in realloc (test_progs+0x24c7c4) thesofproject#1 0xaaaab634f4a0 in libbpf_reallocarray tools/lib/bpf/libbpf_internal.h:191 thesofproject#2 0xaaaab634f840 in libbpf_add_mem tools/lib/bpf/btf.c:163 thesofproject#3 0xaaaab636643c in strset_add_str_mem tools/lib/bpf/strset.c:106 thesofproject#4 0xaaaab6366560 in strset__add_str tools/lib/bpf/strset.c:157 thesofproject#5 0xaaaab6352d70 in btf__add_str tools/lib/bpf/btf.c:1519 thesofproject#6 0xaaaab6353e10 in btf__add_field tools/lib/bpf/btf.c:2032 thesofproject#7 0xaaaab6084fcc in test_btf_dump_incremental tools/testing/selftests/bpf/prog_tests/btf_dump.c:232 thesofproject#8 0xaaaab6097530 in test_btf_dump tools/testing/selftests/bpf/prog_tests/btf_dump.c:875 thesofproject#9 0xaaaab6314ed0 in run_one_test tools/testing/selftests/bpf/test_progs.c:1062 thesofproject#10 0xaaaab631a0a8 in main tools/testing/selftests/bpf/test_progs.c:1697 thesofproject#11 0xffff9676d214 in __libc_start_main ../csu/libc-start.c:308 thesofproject#12 0xaaaab5d65990 (test_progs+0x185990) previously allocated by thread T0 here: #0 0xaaaab5e2c7c4 in realloc (test_progs+0x24c7c4) thesofproject#1 0xaaaab634f4a0 in libbpf_reallocarray tools/lib/bpf/libbpf_internal.h:191 thesofproject#2 0xaaaab634f840 in libbpf_add_mem tools/lib/bpf/btf.c:163 thesofproject#3 0xaaaab636643c in strset_add_str_mem tools/lib/bpf/strset.c:106 thesofproject#4 0xaaaab6366560 in strset__add_str tools/lib/bpf/strset.c:157 thesofproject#5 0xaaaab6352d70 in btf__add_str tools/lib/bpf/btf.c:1519 thesofproject#6 0xaaaab6353ff0 in btf_add_enum_common tools/lib/bpf/btf.c:2070 thesofproject#7 0xaaaab6354080 in btf__add_enum tools/lib/bpf/btf.c:2102 thesofproject#8 0xaaaab6082f50 in test_btf_dump_incremental tools/testing/selftests/bpf/prog_tests/btf_dump.c:162 thesofproject#9 0xaaaab6097530 in test_btf_dump tools/testing/selftests/bpf/prog_tests/btf_dump.c:875 thesofproject#10 0xaaaab6314ed0 in run_one_test tools/testing/selftests/bpf/test_progs.c:1062 thesofproject#11 0xaaaab631a0a8 in main tools/testing/selftests/bpf/test_progs.c:1697 thesofproject#12 0xffff9676d214 in __libc_start_main ../csu/libc-start.c:308 thesofproject#13 0xaaaab5d65990 (test_progs+0x185990) The reason is that the key stored in hash table name_map is a string address, and the string memory is allocated by realloc() function, when the memory is resized by realloc() later, the old memory may be freed, so the address stored in name_map references to a freed memory, causing use-after-free. Fix it by storing duplicated string address in name_map. Fixes: 919d2b1 ("libbpf: Allow modification of BTF and add btf__add_str API") Signed-off-by: Xu Kuohai <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Martin KaFai Lau <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>

…g the sock [ Upstream commit 3cf7203 ] There is a race condition in vxlan that when deleting a vxlan device during receiving packets, there is a possibility that the sock is released after getting vxlan_sock vs from sk_user_data. Then in later vxlan_ecn_decapsulate(), vxlan_get_sk_family() we will got NULL pointer dereference. e.g. #0 [ffffa25ec6978a38] machine_kexec at ffffffff8c669757 thesofproject#1 [ffffa25ec6978a90] __crash_kexec at ffffffff8c7c0a4d thesofproject#2 [ffffa25ec6978b58] crash_kexec at ffffffff8c7c1c48 thesofproject#3 [ffffa25ec6978b60] oops_end at ffffffff8c627f2b thesofproject#4 [ffffa25ec6978b80] page_fault_oops at ffffffff8c678fcb thesofproject#5 [ffffa25ec6978bd8] exc_page_fault at ffffffff8d109542 thesofproject#6 [ffffa25ec6978c00] asm_exc_page_fault at ffffffff8d200b62 [exception RIP: vxlan_ecn_decapsulate+0x3b] RIP: ffffffffc1014e7b RSP: ffffa25ec6978cb0 RFLAGS: 00010246 RAX: 0000000000000008 RBX: ffff8aa000888000 RCX: 0000000000000000 RDX: 000000000000000e RSI: ffff8a9fc7ab803e RDI: ffff8a9fd1168700 RBP: ffff8a9fc7ab803e R8: 0000000000700000 R9: 00000000000010ae R10: ffff8a9fcb748980 R11: 0000000000000000 R12: ffff8a9fd1168700 R13: ffff8aa000888000 R14: 00000000002a0000 R15: 00000000000010ae ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 thesofproject#7 [ffffa25ec6978ce8] vxlan_rcv at ffffffffc10189cd [vxlan] thesofproject#8 [ffffa25ec6978d90] udp_queue_rcv_one_skb at ffffffff8cfb6507 thesofproject#9 [ffffa25ec6978dc0] udp_unicast_rcv_skb at ffffffff8cfb6e45 thesofproject#10 [ffffa25ec6978dc8] __udp4_lib_rcv at ffffffff8cfb8807 thesofproject#11 [ffffa25ec6978e20] ip_protocol_deliver_rcu at ffffffff8cf76951 thesofproject#12 [ffffa25ec6978e48] ip_local_deliver at ffffffff8cf76bde thesofproject#13 [ffffa25ec6978ea0] __netif_receive_skb_one_core at ffffffff8cecde9b thesofproject#14 [ffffa25ec6978ec8] process_backlog at ffffffff8cece139 thesofproject#15 [ffffa25ec6978f00] __napi_poll at ffffffff8ceced1a thesofproject#16 [ffffa25ec6978f28] net_rx_action at ffffffff8cecf1f3 thesofproject#17 [ffffa25ec6978fa0] __softirqentry_text_start at ffffffff8d4000ca thesofproject#18 [ffffa25ec6978ff0] do_softirq at ffffffff8c6fbdc3 Reproducer: https://github.com/Mellanox/ovs-tests/blob/master/test-ovs-vxlan-remove-tunnel-during-traffic.sh Fix this by waiting for all sk_user_data reader to finish before releasing the sock. Reported-by: Jianlin Shi <[email protected]> Suggested-by: Jakub Sitnicki <[email protected]> Fixes: 6a93cc9 ("udp-tunnel: Add a few more UDP tunnel APIs") Signed-off-by: Hangbin Liu <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit caa4b35 ] If asked to drop a packet via TC_ACT_SHOT it is unsafe to assume that res.class contains a valid pointer Sample splat reported by Kyle Zeng [ 5.405624] 0: reclassify loop, rule prio 0, protocol 800 [ 5.406326] ================================================================== [ 5.407240] BUG: KASAN: slab-out-of-bounds in cbq_enqueue+0x54b/0xea0 [ 5.407987] Read of size 1 at addr ffff88800e3122aa by task poc/299 [ 5.408731] [ 5.408897] CPU: 0 PID: 299 Comm: poc Not tainted 5.10.155+ thesofproject#15 [ 5.409516] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 [ 5.410439] Call Trace: [ 5.410764] dump_stack+0x87/0xcd [ 5.411153] print_address_description+0x7a/0x6b0 [ 5.411687] ? vprintk_func+0xb9/0xc0 [ 5.411905] ? printk+0x76/0x96 [ 5.412110] ? cbq_enqueue+0x54b/0xea0 [ 5.412323] kasan_report+0x17d/0x220 [ 5.412591] ? cbq_enqueue+0x54b/0xea0 [ 5.412803] __asan_report_load1_noabort+0x10/0x20 [ 5.413119] cbq_enqueue+0x54b/0xea0 [ 5.413400] ? __kasan_check_write+0x10/0x20 [ 5.413679] __dev_queue_xmit+0x9c0/0x1db0 [ 5.413922] dev_queue_xmit+0xc/0x10 [ 5.414136] ip_finish_output2+0x8bc/0xcd0 [ 5.414436] __ip_finish_output+0x472/0x7a0 [ 5.414692] ip_finish_output+0x5c/0x190 [ 5.414940] ip_output+0x2d8/0x3c0 [ 5.415150] ? ip_mc_finish_output+0x320/0x320 [ 5.415429] __ip_queue_xmit+0x753/0x1760 [ 5.415664] ip_queue_xmit+0x47/0x60 [ 5.415874] __tcp_transmit_skb+0x1ef9/0x34c0 [ 5.416129] tcp_connect+0x1f5e/0x4cb0 [ 5.416347] tcp_v4_connect+0xc8d/0x18c0 [ 5.416577] __inet_stream_connect+0x1ae/0xb40 [ 5.416836] ? local_bh_enable+0x11/0x20 [ 5.417066] ? lock_sock_nested+0x175/0x1d0 [ 5.417309] inet_stream_connect+0x5d/0x90 [ 5.417548] ? __inet_stream_connect+0xb40/0xb40 [ 5.417817] __sys_connect+0x260/0x2b0 [ 5.418037] __x64_sys_connect+0x76/0x80 [ 5.418267] do_syscall_64+0x31/0x50 [ 5.418477] entry_SYSCALL_64_after_hwframe+0x61/0xc6 [ 5.418770] RIP: 0033:0x473bb7 [ 5.418952] Code: 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2a 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 18 89 54 24 0c 48 89 34 24 89 [ 5.420046] RSP: 002b:00007fffd20eb0f8 EFLAGS: 00000246 ORIG_RAX: 000000000000002a [ 5.420472] RAX: ffffffffffffffda RBX: 00007fffd20eb578 RCX: 0000000000473bb7 [ 5.420872] RDX: 0000000000000010 RSI: 00007fffd20eb110 RDI: 0000000000000007 [ 5.421271] RBP: 00007fffd20eb150 R08: 0000000000000001 R09: 0000000000000004 [ 5.421671] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001 [ 5.422071] R13: 00007fffd20eb568 R14: 00000000004fc740 R15: 0000000000000002 [ 5.422471] [ 5.422562] Allocated by task 299: [ 5.422782] __kasan_kmalloc+0x12d/0x160 [ 5.423007] kasan_kmalloc+0x5/0x10 [ 5.423208] kmem_cache_alloc_trace+0x201/0x2e0 [ 5.423492] tcf_proto_create+0x65/0x290 [ 5.423721] tc_new_tfilter+0x137e/0x1830 [ 5.423957] rtnetlink_rcv_msg+0x730/0x9f0 [ 5.424197] netlink_rcv_skb+0x166/0x300 [ 5.424428] rtnetlink_rcv+0x11/0x20 [ 5.424639] netlink_unicast+0x673/0x860 [ 5.424870] netlink_sendmsg+0x6af/0x9f0 [ 5.425100] __sys_sendto+0x58d/0x5a0 [ 5.425315] __x64_sys_sendto+0xda/0xf0 [ 5.425539] do_syscall_64+0x31/0x50 [ 5.425764] entry_SYSCALL_64_after_hwframe+0x61/0xc6 [ 5.426065] [ 5.426157] The buggy address belongs to the object at ffff88800e312200 [ 5.426157] which belongs to the cache kmalloc-128 of size 128 [ 5.426955] The buggy address is located 42 bytes to the right of [ 5.426955] 128-byte region [ffff88800e312200, ffff88800e312280) [ 5.427688] The buggy address belongs to the page: [ 5.427992] page:000000009875fabc refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xe312 [ 5.428562] flags: 0x100000000000200(slab) [ 5.428812] raw: 0100000000000200 dead000000000100 dead000000000122 ffff888007843680 [ 5.429325] raw: 0000000000000000 0000000000100010 00000001ffffffff ffff88800e312401 [ 5.429875] page dumped because: kasan: bad access detected [ 5.430214] page->mem_cgroup:ffff88800e312401 [ 5.430471] [ 5.430564] Memory state around the buggy address: [ 5.430846] ffff88800e312180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 5.431267] ffff88800e312200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fc [ 5.431705] >ffff88800e312280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 5.432123] ^ [ 5.432391] ffff88800e312300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fc [ 5.432810] ffff88800e312380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 5.433229] ================================================================== [ 5.433648] Disabling lock debugging due to kernel taint Fixes: 1da177e ("Linux-2.6.12-rc2") Reported-by: Kyle Zeng <[email protected]> Signed-off-by: Jamal Hadi Salim <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit c4b850d upstream. When gvt debug fs is destroyed, need to have a sane check if drm minor's debugfs root is still available or not, otherwise in case like device remove through unbinding, drm minor's debugfs directory has already been removed, then intel_gvt_debugfs_clean() would act upon dangling pointer like below oops. i915 0000:00:02.0: Direct firmware load for i915/gvt/vid_0x8086_did_0x1926_rid_0x0a.golden_hw_state failed with error -2 i915 0000:00:02.0: MDEV: Registered Console: switching to colour dummy device 80x25 i915 0000:00:02.0: MDEV: Unregistering BUG: kernel NULL pointer dereference, address: 00000000000000a0 PGD 0 P4D 0 Oops: 0002 [thesofproject#1] PREEMPT SMP PTI CPU: 2 PID: 2486 Comm: gfx-unbind.sh Tainted: G I 6.1.0-rc8+ thesofproject#15 Hardware name: Dell Inc. XPS 13 9350/0JXC1H, BIOS 1.13.0 02/10/2020 RIP: 0010:down_write+0x1f/0x90 Code: 1d ff ff 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 53 48 89 fb e8 62 c0 ff ff bf 01 00 00 00 e8 28 5e 31 ff 31 c0 ba 01 00 00 00 <f0> 48 0f b1 13 75 33 65 48 8b 04 25 c0 bd 01 00 48 89 43 08 bf 01 RSP: 0018:ffff9eb3036ffcc8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000000000a0 RCX: ffffff8100000000 RDX: 0000000000000001 RSI: 0000000000000064 RDI: ffffffffa48787a8 RBP: ffff9eb3036ffd30 R08: ffffeb1fc45a0608 R09: ffffeb1fc45a05c0 R10: 0000000000000002 R11: 0000000000000000 R12: 0000000000000000 R13: ffff91acc33fa328 R14: ffff91acc033f080 R15: ffff91acced533e0 FS: 00007f6947bba740(0000) GS:ffff91ae36d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000a0 CR3: 00000001133a2002 CR4: 00000000003706e0 Call Trace: <TASK> simple_recursive_removal+0x9f/0x2a0 ? start_creating.part.0+0x120/0x120 ? _raw_spin_lock+0x13/0x40 debugfs_remove+0x40/0x60 intel_gvt_debugfs_clean+0x15/0x30 [kvmgt] intel_gvt_clean_device+0x49/0xe0 [kvmgt] intel_gvt_driver_remove+0x2f/0xb0 i915_driver_remove+0xa4/0xf0 i915_pci_remove+0x1a/0x30 pci_device_remove+0x33/0xa0 device_release_driver_internal+0x1b2/0x230 unbind_store+0xe0/0x110 kernfs_fop_write_iter+0x11b/0x1f0 vfs_write+0x203/0x3d0 ksys_write+0x63/0xe0 do_syscall_64+0x37/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f6947cb5190 Code: 40 00 48 8b 15 71 9c 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 80 3d 51 24 0e 00 00 74 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 48 89 RSP: 002b:00007ffcbac45a28 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007f6947cb5190 RDX: 000000000000000d RSI: 0000555e35c866a0 RDI: 0000000000000001 RBP: 0000555e35c866a0 R08: 0000000000000002 R09: 0000555e358cb97c R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000001 R13: 000000000000000d R14: 0000000000000000 R15: 0000555e358cb8e0 </TASK> Modules linked in: kvmgt CR2: 00000000000000a0 ---[ end trace 0000000000000000 ]--- Cc: Wang, Zhi <[email protected]> Cc: He, Yu <[email protected]> Cc: [email protected] Reviewed-by: Zhi Wang <[email protected]> Fixes: bc7b0be ("drm/i915/gvt: Add basic debugfs infrastructure") Signed-off-by: Zhenyu Wang <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

If asked to drop a packet via TC_ACT_SHOT it is unsafe to assume that res.class contains a valid pointer Sample splat reported by Kyle Zeng [ 5.405624] 0: reclassify loop, rule prio 0, protocol 800 [ 5.406326] ================================================================== [ 5.407240] BUG: KASAN: slab-out-of-bounds in cbq_enqueue+0x54b/0xea0 [ 5.407987] Read of size 1 at addr ffff88800e3122aa by task poc/299 [ 5.408731] [ 5.408897] CPU: 0 PID: 299 Comm: poc Not tainted 5.10.155+ thesofproject#15 [ 5.409516] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 [ 5.410439] Call Trace: [ 5.410764] dump_stack+0x87/0xcd [ 5.411153] print_address_description+0x7a/0x6b0 [ 5.411687] ? vprintk_func+0xb9/0xc0 [ 5.411905] ? printk+0x76/0x96 [ 5.412110] ? cbq_enqueue+0x54b/0xea0 [ 5.412323] kasan_report+0x17d/0x220 [ 5.412591] ? cbq_enqueue+0x54b/0xea0 [ 5.412803] __asan_report_load1_noabort+0x10/0x20 [ 5.413119] cbq_enqueue+0x54b/0xea0 [ 5.413400] ? __kasan_check_write+0x10/0x20 [ 5.413679] __dev_queue_xmit+0x9c0/0x1db0 [ 5.413922] dev_queue_xmit+0xc/0x10 [ 5.414136] ip_finish_output2+0x8bc/0xcd0 [ 5.414436] __ip_finish_output+0x472/0x7a0 [ 5.414692] ip_finish_output+0x5c/0x190 [ 5.414940] ip_output+0x2d8/0x3c0 [ 5.415150] ? ip_mc_finish_output+0x320/0x320 [ 5.415429] __ip_queue_xmit+0x753/0x1760 [ 5.415664] ip_queue_xmit+0x47/0x60 [ 5.415874] __tcp_transmit_skb+0x1ef9/0x34c0 [ 5.416129] tcp_connect+0x1f5e/0x4cb0 [ 5.416347] tcp_v4_connect+0xc8d/0x18c0 [ 5.416577] __inet_stream_connect+0x1ae/0xb40 [ 5.416836] ? local_bh_enable+0x11/0x20 [ 5.417066] ? lock_sock_nested+0x175/0x1d0 [ 5.417309] inet_stream_connect+0x5d/0x90 [ 5.417548] ? __inet_stream_connect+0xb40/0xb40 [ 5.417817] __sys_connect+0x260/0x2b0 [ 5.418037] __x64_sys_connect+0x76/0x80 [ 5.418267] do_syscall_64+0x31/0x50 [ 5.418477] entry_SYSCALL_64_after_hwframe+0x61/0xc6 [ 5.418770] RIP: 0033:0x473bb7 [ 5.418952] Code: 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2a 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 18 89 54 24 0c 48 89 34 24 89 [ 5.420046] RSP: 002b:00007fffd20eb0f8 EFLAGS: 00000246 ORIG_RAX: 000000000000002a [ 5.420472] RAX: ffffffffffffffda RBX: 00007fffd20eb578 RCX: 0000000000473bb7 [ 5.420872] RDX: 0000000000000010 RSI: 00007fffd20eb110 RDI: 0000000000000007 [ 5.421271] RBP: 00007fffd20eb150 R08: 0000000000000001 R09: 0000000000000004 [ 5.421671] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001 [ 5.422071] R13: 00007fffd20eb568 R14: 00000000004fc740 R15: 0000000000000002 [ 5.422471] [ 5.422562] Allocated by task 299: [ 5.422782] __kasan_kmalloc+0x12d/0x160 [ 5.423007] kasan_kmalloc+0x5/0x10 [ 5.423208] kmem_cache_alloc_trace+0x201/0x2e0 [ 5.423492] tcf_proto_create+0x65/0x290 [ 5.423721] tc_new_tfilter+0x137e/0x1830 [ 5.423957] rtnetlink_rcv_msg+0x730/0x9f0 [ 5.424197] netlink_rcv_skb+0x166/0x300 [ 5.424428] rtnetlink_rcv+0x11/0x20 [ 5.424639] netlink_unicast+0x673/0x860 [ 5.424870] netlink_sendmsg+0x6af/0x9f0 [ 5.425100] __sys_sendto+0x58d/0x5a0 [ 5.425315] __x64_sys_sendto+0xda/0xf0 [ 5.425539] do_syscall_64+0x31/0x50 [ 5.425764] entry_SYSCALL_64_after_hwframe+0x61/0xc6 [ 5.426065] [ 5.426157] The buggy address belongs to the object at ffff88800e312200 [ 5.426157] which belongs to the cache kmalloc-128 of size 128 [ 5.426955] The buggy address is located 42 bytes to the right of [ 5.426955] 128-byte region [ffff88800e312200, ffff88800e312280) [ 5.427688] The buggy address belongs to the page: [ 5.427992] page:000000009875fabc refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xe312 [ 5.428562] flags: 0x100000000000200(slab) [ 5.428812] raw: 0100000000000200 dead000000000100 dead000000000122 ffff888007843680 [ 5.429325] raw: 0000000000000000 0000000000100010 00000001ffffffff ffff88800e312401 [ 5.429875] page dumped because: kasan: bad access detected [ 5.430214] page->mem_cgroup:ffff88800e312401 [ 5.430471] [ 5.430564] Memory state around the buggy address: [ 5.430846] ffff88800e312180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 5.431267] ffff88800e312200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fc [ 5.431705] >ffff88800e312280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 5.432123] ^ [ 5.432391] ffff88800e312300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fc [ 5.432810] ffff88800e312380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 5.433229] ================================================================== [ 5.433648] Disabling lock debugging due to kernel taint Fixes: 1da177e ("Linux-2.6.12-rc2") Reported-by: Kyle Zeng <[email protected]> Signed-off-by: Jamal Hadi Salim <[email protected]> Signed-off-by: David S. Miller <[email protected]>

When gvt debug fs is destroyed, need to have a sane check if drm minor's debugfs root is still available or not, otherwise in case like device remove through unbinding, drm minor's debugfs directory has already been removed, then intel_gvt_debugfs_clean() would act upon dangling pointer like below oops. i915 0000:00:02.0: Direct firmware load for i915/gvt/vid_0x8086_did_0x1926_rid_0x0a.golden_hw_state failed with error -2 i915 0000:00:02.0: MDEV: Registered Console: switching to colour dummy device 80x25 i915 0000:00:02.0: MDEV: Unregistering BUG: kernel NULL pointer dereference, address: 00000000000000a0 PGD 0 P4D 0 Oops: 0002 [thesofproject#1] PREEMPT SMP PTI CPU: 2 PID: 2486 Comm: gfx-unbind.sh Tainted: G I 6.1.0-rc8+ thesofproject#15 Hardware name: Dell Inc. XPS 13 9350/0JXC1H, BIOS 1.13.0 02/10/2020 RIP: 0010:down_write+0x1f/0x90 Code: 1d ff ff 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 53 48 89 fb e8 62 c0 ff ff bf 01 00 00 00 e8 28 5e 31 ff 31 c0 ba 01 00 00 00 <f0> 48 0f b1 13 75 33 65 48 8b 04 25 c0 bd 01 00 48 89 43 08 bf 01 RSP: 0018:ffff9eb3036ffcc8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000000000a0 RCX: ffffff8100000000 RDX: 0000000000000001 RSI: 0000000000000064 RDI: ffffffffa48787a8 RBP: ffff9eb3036ffd30 R08: ffffeb1fc45a0608 R09: ffffeb1fc45a05c0 R10: 0000000000000002 R11: 0000000000000000 R12: 0000000000000000 R13: ffff91acc33fa328 R14: ffff91acc033f080 R15: ffff91acced533e0 FS: 00007f6947bba740(0000) GS:ffff91ae36d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000a0 CR3: 00000001133a2002 CR4: 00000000003706e0 Call Trace: <TASK> simple_recursive_removal+0x9f/0x2a0 ? start_creating.part.0+0x120/0x120 ? _raw_spin_lock+0x13/0x40 debugfs_remove+0x40/0x60 intel_gvt_debugfs_clean+0x15/0x30 [kvmgt] intel_gvt_clean_device+0x49/0xe0 [kvmgt] intel_gvt_driver_remove+0x2f/0xb0 i915_driver_remove+0xa4/0xf0 i915_pci_remove+0x1a/0x30 pci_device_remove+0x33/0xa0 device_release_driver_internal+0x1b2/0x230 unbind_store+0xe0/0x110 kernfs_fop_write_iter+0x11b/0x1f0 vfs_write+0x203/0x3d0 ksys_write+0x63/0xe0 do_syscall_64+0x37/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f6947cb5190 Code: 40 00 48 8b 15 71 9c 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 80 3d 51 24 0e 00 00 74 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 48 89 RSP: 002b:00007ffcbac45a28 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007f6947cb5190 RDX: 000000000000000d RSI: 0000555e35c866a0 RDI: 0000000000000001 RBP: 0000555e35c866a0 R08: 0000000000000002 R09: 0000555e358cb97c R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000001 R13: 000000000000000d R14: 0000000000000000 R15: 0000555e358cb8e0 </TASK> Modules linked in: kvmgt CR2: 00000000000000a0 ---[ end trace 0000000000000000 ]--- Cc: Wang, Zhi <[email protected]> Cc: He, Yu <[email protected]> Cc: [email protected] Reviewed-by: Zhi Wang <[email protected]> Fixes: bc7b0be ("drm/i915/gvt: Add basic debugfs infrastructure") Signed-off-by: Zhenyu Wang <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]

The cited commit adds a compeletion to remove dependency on rtnl lock. But it causes a deadlock for multiple encapsulations: crash> bt ffff8aece8a64000 PID: 1514557 TASK: ffff8aece8a64000 CPU: 3 COMMAND: "tc" #0 [ffffa6d14183f368] __schedule at ffffffffb8ba7f45 #1 [ffffa6d14183f3f8] schedule at ffffffffb8ba8418 #2 [ffffa6d14183f418] schedule_preempt_disabled at ffffffffb8ba8898 #3 [ffffa6d14183f428] __mutex_lock at ffffffffb8baa7f8 #4 [ffffa6d14183f4d0] mutex_lock_nested at ffffffffb8baabeb #5 [ffffa6d14183f4e0] mlx5e_attach_encap at ffffffffc0f48c17 [mlx5_core] #6 [ffffa6d14183f628] mlx5e_tc_add_fdb_flow at ffffffffc0f39680 [mlx5_core] #7 [ffffa6d14183f688] __mlx5e_add_fdb_flow at ffffffffc0f3b636 [mlx5_core] #8 [ffffa6d14183f6f0] mlx5e_tc_add_flow at ffffffffc0f3bcdf [mlx5_core] #9 [ffffa6d14183f728] mlx5e_configure_flower at ffffffffc0f3c1d1 [mlx5_core] #10 [ffffa6d14183f790] mlx5e_rep_setup_tc_cls_flower at ffffffffc0f3d529 [mlx5_core] #11 [ffffa6d14183f7a0] mlx5e_rep_setup_tc_cb at ffffffffc0f3d714 [mlx5_core] #12 [ffffa6d14183f7b0] tc_setup_cb_add at ffffffffb8931bb8 #13 [ffffa6d14183f810] fl_hw_replace_filter at ffffffffc0dae901 [cls_flower] #14 [ffffa6d14183f8d8] fl_change at ffffffffc0db5c57 [cls_flower] #15 [ffffa6d14183f970] tc_new_tfilter at ffffffffb8936047 #16 [ffffa6d14183fac8] rtnetlink_rcv_msg at ffffffffb88c7c31 #17 [ffffa6d14183fb50] netlink_rcv_skb at ffffffffb8942853 #18 [ffffa6d14183fbc0] rtnetlink_rcv at ffffffffb88c1835 #19 [ffffa6d14183fbd0] netlink_unicast at ffffffffb8941f27 #20 [ffffa6d14183fc18] netlink_sendmsg at ffffffffb8942245 #21 [ffffa6d14183fc98] sock_sendmsg at ffffffffb887d482 #22 [ffffa6d14183fcb8] ____sys_sendmsg at ffffffffb887d81a #23 [ffffa6d14183fd38] ___sys_sendmsg at ffffffffb88806e2 #24 [ffffa6d14183fe90] __sys_sendmsg at ffffffffb88807a2 #25 [ffffa6d14183ff28] __x64_sys_sendmsg at ffffffffb888080f #26 [ffffa6d14183ff38] do_syscall_64 at ffffffffb8b9b6a8 #27 [ffffa6d14183ff50] entry_SYSCALL_64_after_hwframe at ffffffffb8c0007c crash> bt 0xffff8aeb07544000 PID: 1110766 TASK: ffff8aeb07544000 CPU: 0 COMMAND: "kworker/u20:9" #0 [ffffa6d14e6b7bd8] __schedule at ffffffffb8ba7f45 #1 [ffffa6d14e6b7c68] schedule at ffffffffb8ba8418 #2 [ffffa6d14e6b7c88] schedule_timeout at ffffffffb8baef88 #3 [ffffa6d14e6b7d10] wait_for_completion at ffffffffb8ba968b #4 [ffffa6d14e6b7d60] mlx5e_take_all_encap_flows at ffffffffc0f47ec4 [mlx5_core] #5 [ffffa6d14e6b7da0] mlx5e_rep_update_flows at ffffffffc0f3e734 [mlx5_core] #6 [ffffa6d14e6b7df8] mlx5e_rep_neigh_update at ffffffffc0f400bb [mlx5_core] #7 [ffffa6d14e6b7e50] process_one_work at ffffffffb80acc9c #8 [ffffa6d14e6b7ed0] worker_thread at ffffffffb80ad012 #9 [ffffa6d14e6b7f10] kthread at ffffffffb80b615d #10 [ffffa6d14e6b7f50] ret_from_fork at ffffffffb8001b2f After the first encap is attached, flow will be added to encap entry's flows list. If neigh update is running at this time, the following encaps of the flow can't hold the encap_tbl_lock and sleep. If neigh update thread is waiting for that flow's init_done, deadlock happens. Fix it by holding lock outside of the for loop. If neigh update is running, prevent encap flows from offloading. Since the lock is held outside of the for loop, concurrent creation of encap entries is not allowed. So remove unnecessary wait_for_completion call for res_ready. Fixes: 95435ad ("net/mlx5e: Only access fully initialized flows in neigh update") Signed-off-by: Chris Mi <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Reviewed-by: Vlad Buslov <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>

Currently, the per cpu upcall counters are allocated after the vport is created and inserted into the system. This could lead to the datapath accessing the counters before they are allocated resulting in a kernel Oops. Here is an example: PID: 59693 TASK: ffff0005f4f51500 CPU: 0 COMMAND: "ovs-vswitchd" #0 [ffff80000a39b5b0] __switch_to at ffffb70f0629f2f4 #1 [ffff80000a39b5d0] __schedule at ffffb70f0629f5cc #2 [ffff80000a39b650] preempt_schedule_common at ffffb70f0629fa60 #3 [ffff80000a39b670] dynamic_might_resched at ffffb70f0629fb58 #4 [ffff80000a39b680] mutex_lock_killable at ffffb70f062a1388 #5 [ffff80000a39b6a0] pcpu_alloc at ffffb70f0594460c #6 [ffff80000a39b750] __alloc_percpu_gfp at ffffb70f05944e68 #7 [ffff80000a39b760] ovs_vport_cmd_new at ffffb70ee6961b90 [openvswitch] ... PID: 58682 TASK: ffff0005b2f0bf00 CPU: 0 COMMAND: "kworker/0:3" #0 [ffff80000a5d2f40] machine_kexec at ffffb70f056a0758 #1 [ffff80000a5d2f70] __crash_kexec at ffffb70f057e2994 #2 [ffff80000a5d3100] crash_kexec at ffffb70f057e2ad8 #3 [ffff80000a5d3120] die at ffffb70f0628234c #4 [ffff80000a5d31e0] die_kernel_fault at ffffb70f062828a8 #5 [ffff80000a5d3210] __do_kernel_fault at ffffb70f056a31f4 #6 [ffff80000a5d3240] do_bad_area at ffffb70f056a32a4 #7 [ffff80000a5d3260] do_translation_fault at ffffb70f062a9710 #8 [ffff80000a5d3270] do_mem_abort at ffffb70f056a2f74 #9 [ffff80000a5d32a0] el1_abort at ffffb70f06297dac #10 [ffff80000a5d32d0] el1h_64_sync_handler at ffffb70f06299b24 #11 [ffff80000a5d3410] el1h_64_sync at ffffb70f056812dc #12 [ffff80000a5d3430] ovs_dp_upcall at ffffb70ee6963c84 [openvswitch] #13 [ffff80000a5d3470] ovs_dp_process_packet at ffffb70ee6963fdc [openvswitch] #14 [ffff80000a5d34f0] ovs_vport_receive at ffffb70ee6972c78 [openvswitch] #15 [ffff80000a5d36f0] netdev_port_receive at ffffb70ee6973948 [openvswitch] #16 [ffff80000a5d3720] netdev_frame_hook at ffffb70ee6973a28 [openvswitch] #17 [ffff80000a5d3730] __netif_receive_skb_core.constprop.0 at ffffb70f06079f90 We moved the per cpu upcall counter allocation to the existing vport alloc and free functions to solve this. Fixes: 95637d9 ("net: openvswitch: release vport resources on failure") Fixes: 1933ea3 ("net: openvswitch: Add support to count upcall packets") Signed-off-by: Eelco Chaudron <[email protected]> Reviewed-by: Simon Horman <[email protected]> Acked-by: Aaron Conole <[email protected]> Signed-off-by: David S. Miller <[email protected]>

When ring_buffer_swap_cpu was called during resize process, the cpu buffer was swapped in the middle, resulting in incorrect state. Continuing to run in the wrong state will result in oops. This issue can be easily reproduced using the following two scripts: /tmp # cat test1.sh //#! /bin/sh for i in `seq 0 100000` do echo 2000 > /sys/kernel/debug/tracing/buffer_size_kb sleep 0.5 echo 5000 > /sys/kernel/debug/tracing/buffer_size_kb sleep 0.5 done /tmp # cat test2.sh //#! /bin/sh for i in `seq 0 100000` do echo irqsoff > /sys/kernel/debug/tracing/current_tracer sleep 1 echo nop > /sys/kernel/debug/tracing/current_tracer sleep 1 done /tmp # ./test1.sh & /tmp # ./test2.sh & A typical oops log is as follows, sometimes with other different oops logs. [ 231.711293] WARNING: CPU: 0 PID: 9 at kernel/trace/ring_buffer.c:2026 rb_update_pages+0x378/0x3f8 [ 231.713375] Modules linked in: [ 231.714735] CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G W 6.5.0-rc1-00276-g20edcec23f92 #15 [ 231.716750] Hardware name: linux,dummy-virt (DT) [ 231.718152] Workqueue: events update_pages_handler [ 231.719714] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 231.721171] pc : rb_update_pages+0x378/0x3f8 [ 231.722212] lr : rb_update_pages+0x25c/0x3f8 [ 231.723248] sp : ffff800082b9bd50 [ 231.724169] x29: ffff800082b9bd50 x28: ffff8000825f7000 x27: 0000000000000000 [ 231.726102] x26: 0000000000000001 x25: fffffffffffff010 x24: 0000000000000ff0 [ 231.728122] x23: ffff0000c3a0b600 x22: ffff0000c3a0b5c0 x21: fffffffffffffe0a [ 231.730203] x20: ffff0000c3a0b600 x19: ffff0000c0102400 x18: 0000000000000000 [ 231.732329] x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffe7aa8510 [ 231.734212] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000002 [ 231.736291] x11: ffff8000826998a8 x10: ffff800082b9baf0 x9 : ffff800081137558 [ 231.738195] x8 : fffffc00030e82c8 x7 : 0000000000000000 x6 : 0000000000000001 [ 231.740192] x5 : ffff0000ffbafe00 x4 : 0000000000000000 x3 : 0000000000000000 [ 231.742118] x2 : 00000000000006aa x1 : 0000000000000001 x0 : ffff0000c0007208 [ 231.744196] Call trace: [ 231.744892] rb_update_pages+0x378/0x3f8 [ 231.745893] update_pages_handler+0x1c/0x38 [ 231.746893] process_one_work+0x1f0/0x468 [ 231.747852] worker_thread+0x54/0x410 [ 231.748737] kthread+0x124/0x138 [ 231.749549] ret_from_fork+0x10/0x20 [ 231.750434] ---[ end trace 0000000000000000 ]--- [ 233.720486] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 233.721696] Mem abort info: [ 233.721935] ESR = 0x0000000096000004 [ 233.722283] EC = 0x25: DABT (current EL), IL = 32 bits [ 233.722596] SET = 0, FnV = 0 [ 233.722805] EA = 0, S1PTW = 0 [ 233.723026] FSC = 0x04: level 0 translation fault [ 233.723458] Data abort info: [ 233.723734] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 233.724176] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 233.724589] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 233.725075] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000104943000 [ 233.725592] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 [ 233.726231] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 233.726720] Modules linked in: [ 233.727007] CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G W 6.5.0-rc1-00276-g20edcec23f92 #15 [ 233.727777] Hardware name: linux,dummy-virt (DT) [ 233.728225] Workqueue: events update_pages_handler [ 233.728655] pstate: 200000c5 (nzCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 233.729054] pc : rb_update_pages+0x1a8/0x3f8 [ 233.729334] lr : rb_update_pages+0x154/0x3f8 [ 233.729592] sp : ffff800082b9bd50 [ 233.729792] x29: ffff800082b9bd50 x28: ffff8000825f7000 x27: 0000000000000000 [ 233.730220] x26: 0000000000000000 x25: ffff800082a8b840 x24: ffff0000c0102418 [ 233.730653] x23: 0000000000000000 x22: fffffc000304c880 x21: 0000000000000003 [ 233.731105] x20: 00000000000001f4 x19: ffff0000c0102400 x18: ffff800082fcbc58 [ 233.731727] x17: 0000000000000000 x16: 0000000000000001 x15: 0000000000000001 [ 233.732282] x14: ffff8000825fe0c8 x13: 0000000000000001 x12: 0000000000000000 [ 233.732709] x11: ffff8000826998a8 x10: 0000000000000ae0 x9 : ffff8000801b760c [ 233.733148] x8 : fefefefefefefeff x7 : 0000000000000018 x6 : ffff0000c03298c0 [ 233.733553] x5 : 0000000000000002 x4 : 0000000000000000 x3 : 0000000000000000 [ 233.733972] x2 : ffff0000c3a0b600 x1 : 0000000000000000 x0 : 0000000000000000 [ 233.734418] Call trace: [ 233.734593] rb_update_pages+0x1a8/0x3f8 [ 233.734853] update_pages_handler+0x1c/0x38 [ 233.735148] process_one_work+0x1f0/0x468 [ 233.735525] worker_thread+0x54/0x410 [ 233.735852] kthread+0x124/0x138 [ 233.736064] ret_from_fork+0x10/0x20 [ 233.736387] Code: 92400000 910006b5 aa000021 aa0303f7 (f9400060) [ 233.736959] ---[ end trace 0000000000000000 ]--- After analysis, the seq of the error is as follows [1-5]: int ring_buffer_resize(struct trace_buffer *buffer, unsigned long size, int cpu_id) { for_each_buffer_cpu(buffer, cpu) { cpu_buffer = buffer->buffers[cpu]; //1. get cpu_buffer, aka cpu_buffer(A) ... ... schedule_work_on(cpu, &cpu_buffer->update_pages_work); //2. 'update_pages_work' is queue on 'cpu', cpu_buffer(A) is passed to // update_pages_handler, do the update process, set 'update_done' in // complete(&cpu_buffer->update_done) and to wakeup resize process. //----> //3. Just at this moment, ring_buffer_swap_cpu is triggered, //cpu_buffer(A) be swaped to cpu_buffer(B), the max_buffer. //ring_buffer_swap_cpu is called as the 'Call trace' below. Call trace: dump_backtrace+0x0/0x2f8 show_stack+0x18/0x28 dump_stack+0x12c/0x188 ring_buffer_swap_cpu+0x2f8/0x328 update_max_tr_single+0x180/0x210 check_critical_timing+0x2b4/0x2c8 tracer_hardirqs_on+0x1c0/0x200 trace_hardirqs_on+0xec/0x378 el0_svc_common+0x64/0x260 do_el0_svc+0x90/0xf8 el0_svc+0x20/0x30 el0_sync_handler+0xb0/0xb8 el0_sync+0x180/0x1c0 //<---- /* wait for all the updates to complete */ for_each_buffer_cpu(buffer, cpu) { cpu_buffer = buffer->buffers[cpu]; //4. get cpu_buffer, cpu_buffer(B) is used in the following process, //the state of cpu_buffer(A) and cpu_buffer(B) is totally wrong. //for example, cpu_buffer(A)->update_done will leave be set 1, and will //not 'wait_for_completion' at the next resize round. if (!cpu_buffer->nr_pages_to_update) continue; if (cpu_online(cpu)) wait_for_completion(&cpu_buffer->update_done); cpu_buffer->nr_pages_to_update = 0; } ... } //5. the state of cpu_buffer(A) and cpu_buffer(B) is totally wrong, //Continuing to run in the wrong state, then oops occurs. Link: https://lore.kernel.org/linux-trace-kernel/[email protected] Signed-off-by: Chen Lin <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]>

…attrs() Running kunit test for 6.5-rc1 hits one bug: ok 10 damon_test_update_monitoring_result general protection fault, probably for non-canonical address 0x1bffa5c419cfb81: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 110 Comm: kunit_try_catch Tainted: G N 6.5.0-rc2 #15 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:damon_set_attrs+0xb9/0x120 Code: f8 00 00 00 4c 8d 58 e0 48 39 c3 74 ba 41 ba 59 17 b7 d1 49 8b 43 10 4d 8d 4b 10 48 8d 70 e0 49 39 c1 74 50 49 8b 40 08 31 d2 <69> 4e 18 10 27 00 00 49 f7 30 31 d2 48 89 c5 89 c8 f7 f5 31 d2 89 RSP: 0000:ffffc900005bfd40 EFLAGS: 00010246 RAX: ffffffff81159fc0 RBX: ffffc900005bfeb8 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 01bffa5c419cfb69 RDI: ffffc900005bfd70 RBP: ffffc90000013c10 R08: ffffc900005bfdc0 R09: ffffffff81ff10ed R10: 00000000d1b71759 R11: ffffffff81ff10dd R12: ffffc90000013a78 R13: ffff88810eb78180 R14: ffffffff818297c0 R15: ffffc90000013c28 FS: 0000000000000000(0000) GS:ffff88813bd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000002a1c001 CR4: 0000000000370ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> damon_test_set_attrs+0x63/0x1f0 kunit_generic_run_threadfn_adapter+0x17/0x30 kthread+0xfd/0x130 The problem seems to be related with the damon_ctx was used without being initialized. Fix it by adding the initialization. Link: https://lkml.kernel.org/r/[email protected] Fixes: aa13779 ("mm/damon/core-test: add a test for damon_set_attrs()") Signed-off-by: Feng Tang <[email protected]> Reviewed-by: SeongJae Park <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

The cited commit holds encap tbl lock unconditionally when setting up dests. But it may cause the following deadlock: PID: 1063722 TASK: ffffa062ca5d0000 CPU: 13 COMMAND: "handler8" #0 [ffffb14de05b7368] __schedule at ffffffffa1d5aa91 #1 [ffffb14de05b7410] schedule at ffffffffa1d5afdb #2 [ffffb14de05b7430] schedule_preempt_disabled at ffffffffa1d5b528 #3 [ffffb14de05b7440] __mutex_lock at ffffffffa1d5d6cb #4 [ffffb14de05b74e8] mutex_lock_nested at ffffffffa1d5ddeb #5 [ffffb14de05b74f8] mlx5e_tc_tun_encap_dests_set at ffffffffc12f2096 [mlx5_core] #6 [ffffb14de05b7568] post_process_attr at ffffffffc12d9fc5 [mlx5_core] #7 [ffffb14de05b75a0] mlx5e_tc_add_fdb_flow at ffffffffc12de877 [mlx5_core] #8 [ffffb14de05b75f0] __mlx5e_add_fdb_flow at ffffffffc12e0eef [mlx5_core] #9 [ffffb14de05b7660] mlx5e_tc_add_flow at ffffffffc12e12f7 [mlx5_core] #10 [ffffb14de05b76b8] mlx5e_configure_flower at ffffffffc12e1686 [mlx5_core] #11 [ffffb14de05b7720] mlx5e_rep_indr_offload at ffffffffc12e3817 [mlx5_core] #12 [ffffb14de05b7730] mlx5e_rep_indr_setup_tc_cb at ffffffffc12e388a [mlx5_core] #13 [ffffb14de05b7740] tc_setup_cb_add at ffffffffa1ab2ba8 #14 [ffffb14de05b77a0] fl_hw_replace_filter at ffffffffc0bdec2f [cls_flower] #15 [ffffb14de05b7868] fl_change at ffffffffc0be6caa [cls_flower] #16 [ffffb14de05b7908] tc_new_tfilter at ffffffffa1ab71f0 [1031218.028143] wait_for_completion+0x24/0x30 [1031218.028589] mlx5e_update_route_decap_flows+0x9a/0x1e0 [mlx5_core] [1031218.029256] mlx5e_tc_fib_event_work+0x1ad/0x300 [mlx5_core] [1031218.029885] process_one_work+0x24e/0x510 Actually no need to hold encap tbl lock if there is no encap action. Fix it by checking if encap action exists or not before holding encap tbl lock. Fixes: 37c3b9f ("net/mlx5e: Prevent encap offload when neigh update is running") Signed-off-by: Chris Mi <[email protected]> Reviewed-by: Vlad Buslov <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>

For IP tunnel encapsulation in ECMP (Equal-Cost Multipath) mode, as the flow is duplicated to the peer eswitch, the related neighbour information on the peer uplink representor is created as well. In the cited commit, eswitch devcom unpair is moved to uplink unload API, specifically the profile->cleanup_tx. If there is a encap rule offloaded in ECMP mode, when one eswitch does unpair (because of unloading the driver, for instance), and the peer rule from the peer eswitch is going to be deleted, the use-after-free error is triggered while accessing neigh info, as it is already cleaned up in uplink's profile->disable, which is before its profile->cleanup_tx. To fix this issue, move the neigh cleanup to profile's cleanup_tx callback, and after mlx5e_cleanup_uplink_rep_tx is called. The neigh init is moved to init_tx for symmeter. [ 2453.376299] BUG: KASAN: slab-use-after-free in mlx5e_rep_neigh_entry_release+0x109/0x3a0 [mlx5_core] [ 2453.379125] Read of size 4 at addr ffff888127af9008 by task modprobe/2496 [ 2453.381542] CPU: 7 PID: 2496 Comm: modprobe Tainted: G B 6.4.0-rc7+ #15 [ 2453.383386] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 2453.384335] Call Trace: [ 2453.384625] <TASK> [ 2453.384891] dump_stack_lvl+0x33/0x50 [ 2453.385285] print_report+0xc2/0x610 [ 2453.385667] ? __virt_addr_valid+0xb1/0x130 [ 2453.386091] ? mlx5e_rep_neigh_entry_release+0x109/0x3a0 [mlx5_core] [ 2453.386757] kasan_report+0xae/0xe0 [ 2453.387123] ? mlx5e_rep_neigh_entry_release+0x109/0x3a0 [mlx5_core] [ 2453.387798] mlx5e_rep_neigh_entry_release+0x109/0x3a0 [mlx5_core] [ 2453.388465] mlx5e_rep_encap_entry_detach+0xa6/0xe0 [mlx5_core] [ 2453.389111] mlx5e_encap_dealloc+0xa7/0x100 [mlx5_core] [ 2453.389706] mlx5e_tc_tun_encap_dests_unset+0x61/0xb0 [mlx5_core] [ 2453.390361] mlx5_free_flow_attr_actions+0x11e/0x340 [mlx5_core] [ 2453.391015] ? complete_all+0x43/0xd0 [ 2453.391398] ? free_flow_post_acts+0x38/0x120 [mlx5_core] [ 2453.392004] mlx5e_tc_del_fdb_flow+0x4ae/0x690 [mlx5_core] [ 2453.392618] mlx5e_tc_del_fdb_peers_flow+0x308/0x370 [mlx5_core] [ 2453.393276] mlx5e_tc_clean_fdb_peer_flows+0xf5/0x140 [mlx5_core] [ 2453.393925] mlx5_esw_offloads_unpair+0x86/0x540 [mlx5_core] [ 2453.394546] ? mlx5_esw_offloads_set_ns_peer.isra.0+0x180/0x180 [mlx5_core] [ 2453.395268] ? down_write+0xaa/0x100 [ 2453.395652] mlx5_esw_offloads_devcom_event+0x203/0x530 [mlx5_core] [ 2453.396317] mlx5_devcom_send_event+0xbb/0x190 [mlx5_core] [ 2453.396917] mlx5_esw_offloads_devcom_cleanup+0xb0/0xd0 [mlx5_core] [ 2453.397582] mlx5e_tc_esw_cleanup+0x42/0x120 [mlx5_core] [ 2453.398182] mlx5e_rep_tc_cleanup+0x15/0x30 [mlx5_core] [ 2453.398768] mlx5e_cleanup_rep_tx+0x6c/0x80 [mlx5_core] [ 2453.399367] mlx5e_detach_netdev+0xee/0x120 [mlx5_core] [ 2453.399957] mlx5e_netdev_change_profile+0x84/0x170 [mlx5_core] [ 2453.400598] mlx5e_vport_rep_unload+0xe0/0xf0 [mlx5_core] [ 2453.403781] mlx5_eswitch_unregister_vport_reps+0x15e/0x190 [mlx5_core] [ 2453.404479] ? mlx5_eswitch_register_vport_reps+0x200/0x200 [mlx5_core] [ 2453.405170] ? up_write+0x39/0x60 [ 2453.405529] ? kernfs_remove_by_name_ns+0xb7/0xe0 [ 2453.405985] auxiliary_bus_remove+0x2e/0x40 [ 2453.406405] device_release_driver_internal+0x243/0x2d0 [ 2453.406900] ? kobject_put+0x42/0x2d0 [ 2453.407284] bus_remove_device+0x128/0x1d0 [ 2453.407687] device_del+0x240/0x550 [ 2453.408053] ? waiting_for_supplier_show+0xe0/0xe0 [ 2453.408511] ? kobject_put+0xfa/0x2d0 [ 2453.408889] ? __kmem_cache_free+0x14d/0x280 [ 2453.409310] mlx5_rescan_drivers_locked.part.0+0xcd/0x2b0 [mlx5_core] [ 2453.409973] mlx5_unregister_device+0x40/0x50 [mlx5_core] [ 2453.410561] mlx5_uninit_one+0x3d/0x110 [mlx5_core] [ 2453.411111] remove_one+0x89/0x130 [mlx5_core] [ 2453.411628] pci_device_remove+0x59/0xf0 [ 2453.412026] device_release_driver_internal+0x243/0x2d0 [ 2453.412511] ? parse_option_str+0x14/0x90 [ 2453.412915] driver_detach+0x7b/0xf0 [ 2453.413289] bus_remove_driver+0xb5/0x160 [ 2453.413685] pci_unregister_driver+0x3f/0xf0 [ 2453.414104] mlx5_cleanup+0xc/0x20 [mlx5_core] Fixes: 2be5bd4 ("net/mlx5: Handle pairing of E-switch via uplink un/load APIs") Signed-off-by: Jianbo Liu <[email protected]> Reviewed-by: Vlad Buslov <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>

The following processes run into a deadlock. CPU 41 was waiting for CPU 29 to handle a CSD request while holding spinlock "crashdump_lock", but CPU 29 was hung by that spinlock with IRQs disabled. PID: 17360 TASK: ffff95c1090c5c40 CPU: 41 COMMAND: "mrdiagd" !# 0 [ffffb80edbf37b58] __read_once_size at ffffffff9b871a40 include/linux/compiler.h:185:0 !# 1 [ffffb80edbf37b58] atomic_read at ffffffff9b871a40 arch/x86/include/asm/atomic.h:27:0 !# 2 [ffffb80edbf37b58] dump_stack at ffffffff9b871a40 lib/dump_stack.c:54:0 # 3 [ffffb80edbf37b78] csd_lock_wait_toolong at ffffffff9b131ad5 kernel/smp.c:364:0 # 4 [ffffb80edbf37b78] __csd_lock_wait at ffffffff9b131ad5 kernel/smp.c:384:0 # 5 [ffffb80edbf37bf8] csd_lock_wait at ffffffff9b13267a kernel/smp.c:394:0 # 6 [ffffb80edbf37bf8] smp_call_function_many at ffffffff9b13267a kernel/smp.c:843:0 # 7 [ffffb80edbf37c50] smp_call_function at ffffffff9b13279d kernel/smp.c:867:0 # 8 [ffffb80edbf37c50] on_each_cpu at ffffffff9b13279d kernel/smp.c:976:0 # 9 [ffffb80edbf37c78] flush_tlb_kernel_range at ffffffff9b085c4b arch/x86/mm/tlb.c:742:0 #10 [ffffb80edbf37cb8] __purge_vmap_area_lazy at ffffffff9b23a1e0 mm/vmalloc.c:701:0 #11 [ffffb80edbf37ce0] try_purge_vmap_area_lazy at ffffffff9b23a2cc mm/vmalloc.c:722:0 #12 [ffffb80edbf37ce0] free_vmap_area_noflush at ffffffff9b23a2cc mm/vmalloc.c:754:0 #13 [ffffb80edbf37cf8] free_unmap_vmap_area at ffffffff9b23bb3b mm/vmalloc.c:764:0 #14 [ffffb80edbf37cf8] remove_vm_area at ffffffff9b23bb3b mm/vmalloc.c:1509:0 #15 [ffffb80edbf37d18] __vunmap at ffffffff9b23bb8a mm/vmalloc.c:1537:0 #16 [ffffb80edbf37d40] vfree at ffffffff9b23bc85 mm/vmalloc.c:1612:0 #17 [ffffb80edbf37d58] megasas_free_host_crash_buffer [megaraid_sas] at ffffffffc020b7f2 drivers/scsi/megaraid/megaraid_sas_fusion.c:3932:0 #18 [ffffb80edbf37d80] fw_crash_state_store [megaraid_sas] at ffffffffc01f804d drivers/scsi/megaraid/megaraid_sas_base.c:3291:0 #19 [ffffb80edbf37dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #20 [ffffb80edbf37dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #21 [ffffb80edbf37de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #22 [ffffb80edbf37e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #23 [ffffb80edbf37ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #24 [ffffb80edbf37ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #25 [ffffb80edbf37ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #26 [ffffb80edbf37f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #27 [ffffb80edbf37f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 PID: 17355 TASK: ffff95c1090c3d80 CPU: 29 COMMAND: "mrdiagd" !# 0 [ffffb80f2d3c7d30] __read_once_size at ffffffff9b0f2ab0 include/linux/compiler.h:185:0 !# 1 [ffffb80f2d3c7d30] native_queued_spin_lock_slowpath at ffffffff9b0f2ab0 kernel/locking/qspinlock.c:368:0 # 2 [ffffb80f2d3c7d58] pv_queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/paravirt.h:674:0 # 3 [ffffb80f2d3c7d58] queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/qspinlock.h:53:0 # 4 [ffffb80f2d3c7d68] queued_spin_lock at ffffffff9b8961a6 include/asm-generic/qspinlock.h:90:0 # 5 [ffffb80f2d3c7d68] do_raw_spin_lock_flags at ffffffff9b8961a6 include/linux/spinlock.h:173:0 # 6 [ffffb80f2d3c7d68] __raw_spin_lock_irqsave at ffffffff9b8961a6 include/linux/spinlock_api_smp.h:122:0 # 7 [ffffb80f2d3c7d68] _raw_spin_lock_irqsave at ffffffff9b8961a6 kernel/locking/spinlock.c:160:0 # 8 [ffffb80f2d3c7d88] fw_crash_buffer_store [megaraid_sas] at ffffffffc01f8129 drivers/scsi/megaraid/megaraid_sas_base.c:3205:0 # 9 [ffffb80f2d3c7dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #10 [ffffb80f2d3c7dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #11 [ffffb80f2d3c7de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #12 [ffffb80f2d3c7e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #13 [ffffb80f2d3c7ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #14 [ffffb80f2d3c7ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #15 [ffffb80f2d3c7ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #16 [ffffb80f2d3c7f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #17 [ffffb80f2d3c7f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 The lock is used to synchronize different sysfs operations, it doesn't protect any resource that will be touched by an interrupt. Consequently it's not required to disable IRQs. Replace the spinlock with a mutex to fix the deadlock. Signed-off-by: Junxiao Bi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Mike Christie <[email protected]> Cc: [email protected] Signed-off-by: Martin K. Petersen <[email protected]>

…roy() After the commit in Fixes:, if a module that created a slab cache does not release all of its allocated objects before destroying the cache (at rmmod time), we might end up releasing the kmem_cache object without removing it from the slab_caches list thus corrupting the list as kmem_cache_destroy() ignores the return value from shutdown_cache(), which in turn never removes the kmem_cache object from slabs_list in case __kmem_cache_shutdown() fails to release all of the cache's slabs. This is easily observable on a kernel built with CONFIG_DEBUG_LIST=y as after that ill release the system will immediately trip on list_add, or list_del, assertions similar to the one shown below as soon as another kmem_cache gets created, or destroyed: [ 1041.213632] list_del corruption. next->prev should be ffff89f596fb5768, but was 52f1e5016aeee75d. (next=ffff89f595a1b268) [ 1041.219165] ------------[ cut here ]------------ [ 1041.221517] kernel BUG at lib/list_debug.c:62! [ 1041.223452] invalid opcode: 0000 [#1] PREEMPT SMP PTI [ 1041.225408] CPU: 2 PID: 1852 Comm: rmmod Kdump: loaded Tainted: G B W OE 6.5.0 #15 [ 1041.228244] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20230524-3.fc37 05/24/2023 [ 1041.231212] RIP: 0010:__list_del_entry_valid+0xae/0xb0 Another quick way to trigger this issue, in a kernel with CONFIG_SLUB=y, is to set slub_debug to poison the released objects and then just run cat /proc/slabinfo after removing the module that leaks slab objects, in which case the kernel will panic: [ 50.954843] general protection fault, probably for non-canonical address 0xa56b6b6b6b6b6b8b: 0000 [#1] PREEMPT SMP PTI [ 50.961545] CPU: 2 PID: 1495 Comm: cat Kdump: loaded Tainted: G B W OE 6.5.0 #15 [ 50.966808] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20230524-3.fc37 05/24/2023 [ 50.972663] RIP: 0010:get_slabinfo+0x42/0xf0 This patch fixes this issue by properly checking shutdown_cache()'s return value before taking the kmem_cache_release() branch. Fixes: 0495e33 ("mm/slab_common: Deleting kobject in kmem_cache_destroy() without holding slab_mutex/cpu_hotplug_lock") Signed-off-by: Rafael Aquini <[email protected]> Cc: [email protected] Reviewed-by: Waiman Long <[email protected]> Signed-off-by: Vlastimil Babka <[email protected]>

Fix an error detected by memory sanitizer: ``` ==4033==WARNING: MemorySanitizer: use-of-uninitialized-value #0 0x55fb0fbedfc7 in read_alias_info tools/perf/util/pmu.c:457:6 #1 0x55fb0fbea339 in check_info_data tools/perf/util/pmu.c:1434:2 #2 0x55fb0fbea339 in perf_pmu__check_alias tools/perf/util/pmu.c:1504:9 #3 0x55fb0fbdca85 in parse_events_add_pmu tools/perf/util/parse-events.c:1429:32 #4 0x55fb0f965230 in parse_events_parse tools/perf/util/parse-events.y:299:6 #5 0x55fb0fbdf6b2 in parse_events__scanner tools/perf/util/parse-events.c:1822:8 #6 0x55fb0fbdf8c1 in __parse_events tools/perf/util/parse-events.c:2094:8 #7 0x55fb0fa8ffa9 in parse_events tools/perf/util/parse-events.h:41:9 #8 0x55fb0fa8ffa9 in test_event tools/perf/tests/parse-events.c:2393:8 #9 0x55fb0fa8f458 in test__pmu_events tools/perf/tests/parse-events.c:2551:15 #10 0x55fb0fa6d93f in run_test tools/perf/tests/builtin-test.c:242:9 #11 0x55fb0fa6d93f in test_and_print tools/perf/tests/builtin-test.c:271:8 #12 0x55fb0fa6d082 in __cmd_test tools/perf/tests/builtin-test.c:442:5 #13 0x55fb0fa6d082 in cmd_test tools/perf/tests/builtin-test.c:564:9 #14 0x55fb0f942720 in run_builtin tools/perf/perf.c:322:11 #15 0x55fb0f942486 in handle_internal_command tools/perf/perf.c:375:8 #16 0x55fb0f941dab in run_argv tools/perf/perf.c:419:2 #17 0x55fb0f941dab in main tools/perf/perf.c:535:3 ``` Fixes: 7b723db ("perf pmu: Be lazy about loading event info files from sysfs") Signed-off-by: Ian Rogers <[email protected]> Cc: James Clark <[email protected]> Cc: Kan Liang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Namhyung Kim <[email protected]>

The following call trace shows a deadlock issue due to recursive locking of mutex "device_mutex". First lock acquire is in target_for_each_device() and second in target_free_device(). PID: 148266 TASK: ffff8be21ffb5d00 CPU: 10 COMMAND: "iscsi_ttx" #0 [ffffa2bfc9ec3b18] __schedule at ffffffffa8060e7f #1 [ffffa2bfc9ec3ba0] schedule at ffffffffa8061224 #2 [ffffa2bfc9ec3bb8] schedule_preempt_disabled at ffffffffa80615ee #3 [ffffa2bfc9ec3bc8] __mutex_lock at ffffffffa8062fd7 #4 [ffffa2bfc9ec3c40] __mutex_lock_slowpath at ffffffffa80631d3 #5 [ffffa2bfc9ec3c50] mutex_lock at ffffffffa806320c #6 [ffffa2bfc9ec3c68] target_free_device at ffffffffc0935998 [target_core_mod] #7 [ffffa2bfc9ec3c90] target_core_dev_release at ffffffffc092f975 [target_core_mod] #8 [ffffa2bfc9ec3ca0] config_item_put at ffffffffa79d250f #9 [ffffa2bfc9ec3cd0] config_item_put at ffffffffa79d2583 #10 [ffffa2bfc9ec3ce0] target_devices_idr_iter at ffffffffc0933f3a [target_core_mod] #11 [ffffa2bfc9ec3d00] idr_for_each at ffffffffa803f6fc #12 [ffffa2bfc9ec3d60] target_for_each_device at ffffffffc0935670 [target_core_mod] #13 [ffffa2bfc9ec3d98] transport_deregister_session at ffffffffc0946408 [target_core_mod] #14 [ffffa2bfc9ec3dc8] iscsit_close_session at ffffffffc09a44a6 [iscsi_target_mod] #15 [ffffa2bfc9ec3df0] iscsit_close_connection at ffffffffc09a4a88 [iscsi_target_mod] #16 [ffffa2bfc9ec3df8] finish_task_switch at ffffffffa76e5d07 #17 [ffffa2bfc9ec3e78] iscsit_take_action_for_connection_exit at ffffffffc0991c23 [iscsi_target_mod] #18 [ffffa2bfc9ec3ea0] iscsi_target_tx_thread at ffffffffc09a403b [iscsi_target_mod] #19 [ffffa2bfc9ec3f08] kthread at ffffffffa76d8080 #20 [ffffa2bfc9ec3f50] ret_from_fork at ffffffffa8200364 Fixes: 36d4cb4 ("scsi: target: Avoid that EXTENDED COPY commands trigger lock inversion") Signed-off-by: Junxiao Bi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Mike Christie <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>

Currently, for double invoke call_rcu(), will dump rcu_head objects memory info, if the objects is not allocated from the slab allocator, the vmalloc_dump_obj() will be invoke and the vmap_area_lock spinlock need to be held, since the call_rcu() can be invoked in interrupt context, therefore, there is a possibility of spinlock deadlock scenarios. And in Preempt-RT kernel, the rcutorture test also trigger the following lockdep warning: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 1, name: swapper/0 preempt_count: 1, expected: 0 RCU nest depth: 1, expected: 1 3 locks held by swapper/0/1: #0: ffffffffb534ee80 (fullstop_mutex){+.+.}-{4:4}, at: torture_init_begin+0x24/0xa0 #1: ffffffffb5307940 (rcu_read_lock){....}-{1:3}, at: rcu_torture_init+0x1ec7/0x2370 #2: ffffffffb536af40 (vmap_area_lock){+.+.}-{3:3}, at: find_vmap_area+0x1f/0x70 irq event stamp: 565512 hardirqs last enabled at (565511): [<ffffffffb379b138>] __call_rcu_common+0x218/0x940 hardirqs last disabled at (565512): [<ffffffffb5804262>] rcu_torture_init+0x20b2/0x2370 softirqs last enabled at (399112): [<ffffffffb36b2586>] __local_bh_enable_ip+0x126/0x170 softirqs last disabled at (399106): [<ffffffffb43fef59>] inet_register_protosw+0x9/0x1d0 Preemption disabled at: [<ffffffffb58040c3>] rcu_torture_init+0x1f13/0x2370 CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.5.0-rc4-rt2-yocto-preempt-rt+ thesofproject#15 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x68/0xb0 dump_stack+0x14/0x20 __might_resched+0x1aa/0x280 ? __pfx_rcu_torture_err_cb+0x10/0x10 rt_spin_lock+0x53/0x130 ? find_vmap_area+0x1f/0x70 find_vmap_area+0x1f/0x70 vmalloc_dump_obj+0x20/0x60 mem_dump_obj+0x22/0x90 __call_rcu_common+0x5bf/0x940 ? debug_smp_processor_id+0x1b/0x30 call_rcu_hurry+0x14/0x20 rcu_torture_init+0x1f82/0x2370 ? __pfx_rcu_torture_leak_cb+0x10/0x10 ? __pfx_rcu_torture_leak_cb+0x10/0x10 ? __pfx_rcu_torture_init+0x10/0x10 do_one_initcall+0x6c/0x300 ? debug_smp_processor_id+0x1b/0x30 kernel_init_freeable+0x2b9/0x540 ? __pfx_kernel_init+0x10/0x10 kernel_init+0x1f/0x150 ret_from_fork+0x40/0x50 ? __pfx_kernel_init+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> The previous patch fixes this by using the deadlock-safe best-effort version of find_vm_area. However, in case of failure print the fact that the pointer was a vmalloc pointer so that we print at least something. Link: https://lkml.kernel.org/r/[email protected] Fixes: 98f1808 ("mm: Make mem_dump_obj() handle vmalloc() memory") Signed-off-by: Zqiang <[email protected]> Signed-off-by: Joel Fernandes (Google) <[email protected]> Reported-by: Zhen Lei <[email protected]> Reviewed-by: Matthew Wilcox (Oracle) <[email protected]> Cc: Paul E. McKenney <[email protected]> Cc: Uladzislau Rezki (Sony) <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

vhost_worker will call tun call backs to receive packets. If too many illegal packets arrives, tun_do_read will keep dumping packet contents. When console is enabled, it will costs much more cpu time to dump packet and soft lockup will be detected. net_ratelimit mechanism can be used to limit the dumping rate. PID: 33036 TASK: ffff949da6f20000 CPU: 23 COMMAND: "vhost-32980" #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253 #1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3 #2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e #3 [fffffe00003fced0] do_nmi at ffffffff8922660d #4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663 [exception RIP: io_serial_in+20] RIP: ffffffff89792594 RSP: ffffa655314979e8 RFLAGS: 00000002 RAX: ffffffff89792500 RBX: ffffffff8af428a0 RCX: 0000000000000000 RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff8af428a0 RBP: 0000000000002710 R8: 0000000000000004 R9: 000000000000000f R10: 0000000000000000 R11: ffffffff8acbf64f R12: 0000000000000020 R13: ffffffff8acbf698 R14: 0000000000000058 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #5 [ffffa655314979e8] io_serial_in at ffffffff89792594 #6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470 #7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6 #8 [ffffa65531497a20] uart_console_write at ffffffff8978b605 #9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558 #10 [ffffa65531497ac8] console_unlock at ffffffff89316124 #11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07 #12 [ffffa65531497b68] printk at ffffffff89318306 #13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765 #14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun] #15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun] #16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net] #17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost] #18 [ffffa65531497f10] kthread at ffffffff892d2e72 #19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f Fixes: ef3db4a ("tun: avoid BUG, dump packet on GSO errors") Signed-off-by: Lei Chen <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Acked-by: Jason Wang <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

We have been seeing crashes on duplicate keys in btrfs_set_item_key_safe(): BTRFS critical (device vdb): slot 4 key (450 108 8192) new key (450 108 8192) ------------[ cut here ]------------ kernel BUG at fs/btrfs/ctree.c:2620! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 3139 Comm: xfs_io Kdump: loaded Not tainted 6.9.0 #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:btrfs_set_item_key_safe+0x11f/0x290 [btrfs] With the following stack trace: #0 btrfs_set_item_key_safe (fs/btrfs/ctree.c:2620:4) #1 btrfs_drop_extents (fs/btrfs/file.c:411:4) #2 log_one_extent (fs/btrfs/tree-log.c:4732:9) #3 btrfs_log_changed_extents (fs/btrfs/tree-log.c:4955:9) #4 btrfs_log_inode (fs/btrfs/tree-log.c:6626:9) #5 btrfs_log_inode_parent (fs/btrfs/tree-log.c:7070:8) #6 btrfs_log_dentry_safe (fs/btrfs/tree-log.c:7171:8) #7 btrfs_sync_file (fs/btrfs/file.c:1933:8) #8 vfs_fsync_range (fs/sync.c:188:9) #9 vfs_fsync (fs/sync.c:202:9) #10 do_fsync (fs/sync.c:212:9) #11 __do_sys_fdatasync (fs/sync.c:225:9) #12 __se_sys_fdatasync (fs/sync.c:223:1) #13 __x64_sys_fdatasync (fs/sync.c:223:1) #14 do_syscall_x64 (arch/x86/entry/common.c:52:14) #15 do_syscall_64 (arch/x86/entry/common.c:83:7) #16 entry_SYSCALL_64+0xaf/0x14c (arch/x86/entry/entry_64.S:121) So we're logging a changed extent from fsync, which is splitting an extent in the log tree. But this split part already exists in the tree, triggering the BUG(). This is the state of the log tree at the time of the crash, dumped with drgn (https://github.com/osandov/drgn/blob/main/contrib/btrfs_tree.py) to get more details than btrfs_print_leaf() gives us: >>> print_extent_buffer(prog.crashed_thread().stack_trace()[0]["eb"]) leaf 33439744 level 0 items 72 generation 9 owner 18446744073709551610 leaf 33439744 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da item 0 key (450 INODE_ITEM 0) itemoff 16123 itemsize 160 generation 7 transid 9 size 8192 nbytes 8473563889606862198 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 204 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417704.983333333 (2024-05-22 15:41:44) mtime 1716417704.983333333 (2024-05-22 15:41:44) otime 17592186044416.000000000 (559444-03-08 01:40:16) item 1 key (450 INODE_REF 256) itemoff 16110 itemsize 13 index 195 namelen 3 name: 193 item 2 key (450 XATTR_ITEM 1640047104) itemoff 16073 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 3 key (450 EXTENT_DATA 0) itemoff 16020 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 4096 ram 12288 extent compression 0 (none) item 4 key (450 EXTENT_DATA 4096) itemoff 15967 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 4096 nr 8192 item 5 key (450 EXTENT_DATA 8192) itemoff 15914 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 ... So the real problem happened earlier: notice that items 4 (4k-12k) and 5 (8k-12k) overlap. Both are prealloc extents. Item 4 straddles i_size and item 5 starts at i_size. Here is the state of the filesystem tree at the time of the crash: >>> root = prog.crashed_thread().stack_trace()[2]["inode"].root >>> ret, nodes, slots = btrfs_search_slot(root, BtrfsKey(450, 0, 0)) >>> print_extent_buffer(nodes[0]) leaf 30425088 level 0 items 184 generation 9 owner 5 leaf 30425088 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da ... item 179 key (450 INODE_ITEM 0) itemoff 4907 itemsize 160 generation 7 transid 7 size 4096 nbytes 12288 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 6 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417703.220000000 (2024-05-22 15:41:43) mtime 1716417703.220000000 (2024-05-22 15:41:43) otime 1716417703.220000000 (2024-05-22 15:41:43) item 180 key (450 INODE_REF 256) itemoff 4894 itemsize 13 index 195 namelen 3 name: 193 item 181 key (450 XATTR_ITEM 1640047104) itemoff 4857 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 182 key (450 EXTENT_DATA 0) itemoff 4804 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 8192 ram 12288 extent compression 0 (none) item 183 key (450 EXTENT_DATA 8192) itemoff 4751 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 Item 5 in the log tree corresponds to item 183 in the filesystem tree, but nothing matches item 4. Furthermore, item 183 is the last item in the leaf. btrfs_log_prealloc_extents() is responsible for logging prealloc extents beyond i_size. It first truncates any previously logged prealloc extents that start beyond i_size. Then, it walks the filesystem tree and copies the prealloc extent items to the log tree. If it hits the end of a leaf, then it calls btrfs_next_leaf(), which unlocks the tree and does another search. However, while the filesystem tree is unlocked, an ordered extent completion may modify the tree. In particular, it may insert an extent item that overlaps with an extent item that was already copied to the log tree. This may manifest in several ways depending on the exact scenario, including an EEXIST error that is silently translated to a full sync, overlapping items in the log tree, or this crash. This particular crash is triggered by the following sequence of events: - Initially, the file has i_size=4k, a regular extent from 0-4k, and a prealloc extent beyond i_size from 4k-12k. The prealloc extent item is the last item in its B-tree leaf. - The file is fsync'd, which copies its inode item and both extent items to the log tree. - An xattr is set on the file, which sets the BTRFS_INODE_COPY_EVERYTHING flag. - The range 4k-8k in the file is written using direct I/O. i_size is extended to 8k, but the ordered extent is still in flight. - The file is fsync'd. Since BTRFS_INODE_COPY_EVERYTHING is set, this calls copy_inode_items_to_log(), which calls btrfs_log_prealloc_extents(). - btrfs_log_prealloc_extents() finds the 4k-12k prealloc extent in the filesystem tree. Since it starts before i_size, it skips it. Since it is the last item in its B-tree leaf, it calls btrfs_next_leaf(). - btrfs_next_leaf() unlocks the path. - The ordered extent completion runs, which converts the 4k-8k part of the prealloc extent to written and inserts the remaining prealloc part from 8k-12k. - btrfs_next_leaf() does a search and finds the new prealloc extent 8k-12k. - btrfs_log_prealloc_extents() copies the 8k-12k prealloc extent into the log tree. Note that it overlaps with the 4k-12k prealloc extent that was copied to the log tree by the first fsync. - fsync calls btrfs_log_changed_extents(), which tries to log the 4k-8k extent that was written. - This tries to drop the range 4k-8k in the log tree, which requires adjusting the start of the 4k-12k prealloc extent in the log tree to 8k. - btrfs_set_item_key_safe() sees that there is already an extent starting at 8k in the log tree and calls BUG(). Fix this by detecting when we're about to insert an overlapping file extent item in the log tree and truncating the part that would overlap. CC: [email protected] # 6.1+ Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Omar Sandoval <[email protected]> Signed-off-by: David Sterba <[email protected]>

A sysfs reader can race with a device reset or removal, attempting to read device state when the device is not actually present. eg: [exception RIP: qed_get_current_link+17] thesofproject#8 [ffffb9e4f2907c48] qede_get_link_ksettings at ffffffffc07a994a [qede] thesofproject#9 [ffffb9e4f2907cd8] __rh_call_get_link_ksettings at ffffffff992b01a3 thesofproject#10 [ffffb9e4f2907d38] __ethtool_get_link_ksettings at ffffffff992b04e4 thesofproject#11 [ffffb9e4f2907d90] duplex_show at ffffffff99260300 thesofproject#12 [ffffb9e4f2907e38] dev_attr_show at ffffffff9905a01c thesofproject#13 [ffffb9e4f2907e50] sysfs_kf_seq_show at ffffffff98e0145b thesofproject#14 [ffffb9e4f2907e68] seq_read at ffffffff98d902e3 thesofproject#15 [ffffb9e4f2907ec8] vfs_read at ffffffff98d657d1 thesofproject#16 [ffffb9e4f2907f00] ksys_read at ffffffff98d65c3f thesofproject#17 [ffffb9e4f2907f38] do_syscall_64 at ffffffff98a052fb crash> struct net_device.state ffff9a9d21336000 state = 5, state 5 is __LINK_STATE_START (0b1) and __LINK_STATE_NOCARRIER (0b100). The device is not present, note lack of __LINK_STATE_PRESENT (0b10). This is the same sort of panic as observed in commit 4224cfd ("net-sysfs: add check for netdevice being present to speed_show"). There are many other callers of __ethtool_get_link_ksettings() which don't have a device presence check. Move this check into ethtool to protect all callers. Fixes: d519e17 ("net: export device speed and duplex via sysfs") Fixes: 4224cfd ("net-sysfs: add check for netdevice being present to speed_show") Signed-off-by: Jamie Bainbridge <[email protected]> Link: https://patch.msgid.link/8bae218864beaa44ed01628140475b9bf641c5b0.1724393671.git.jamie.bainbridge@gmail.com Signed-off-by: Jakub Kicinski <[email protected]>

plbossart and others added 18 commits July 2, 2018 12:22

ASoC: Intel: revert code related to TDF8532

12ef211

Clean-up before re-adding latest code Signed-off-by: Pierre-Louis Bossart <[email protected]>

ASoC: codecs: tdf8532: move to component model

078d219

Needs to be squashed for 4.18+ Signed-off-by: Pierre-Louis Bossart <[email protected]>

ASoC: Intel: Board: DAI links for probe in GPMRB machine driver

94d68e0

Added two DAI links for probe playback and capture Change-Id: I0bf364eba3b6a2b779625a6fd1b664c2530a1ab2 Signed-off-by: Sinha, Mohit <[email protected]>

ASoC: Intel: Boards: Add FW logging DAI-links for GPMRB

d8be288

Add two FW logging DAI for each DSP core Change-Id: Ic825ecb4afbbcacabda6b74e2e5f2969fc722a1f Signed-off-by: Sinha, Mohit <[email protected]>

ASoC: Intel: bxt-tdf8532: reuse machine driver for GP-MRB

4ed2bb3

Signed-off-by: Keyon Jie <[email protected]>

ASoC: Intel: bxt-tdf8532: change probe and trace buffer dai_links to …

5c69915

…dynamic We should use .dynamic for all FE dai_links, so change probe and trace buffer ones here to align to that. Signed-off-by: Keyon Jie <[email protected]>

ASoC: codecs: TDF8532: use Linux style

f8bff0c

Make checkpatch happy, no functionality change Signed-off-by: Pierre-Louis Bossart <[email protected]>

ASoC: Intel: bxt-tdf8532: use Linux style

22aa067

Make checkpatch happy, no functionality change Signed-off-by: Pierre-Louis Bossart <[email protected]>

plbossart requested a review from lgirdwood July 2, 2018 18:52

plbossart merged commit c3fe597 into thesofproject:topic/sof-dev Jul 2, 2018

mblack154 mentioned this pull request Jul 22, 2021

Dell XPS 17 (9710) No Audio #3057

Closed

ppfranco mentioned this pull request Aug 9, 2021

Speakers/headphones not working in Lenovo Yoga C640 (Comet Lake PCH cAVS, Realtek ALC285) #3087

Closed

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Topic/sof dev: fix TDF8532 codec and machine driver #15

Topic/sof dev: fix TDF8532 codec and machine driver #15

plbossart commented Jul 2, 2018

Topic/sof dev: fix TDF8532 codec and machine driver #15

Topic/sof dev: fix TDF8532 codec and machine driver #15

Conversation

plbossart commented Jul 2, 2018