Upstream/rt5677 #3

cujomalainey · 2019-08-23T16:48:18Z

Objectives:
Update to new alsa API and squash into original changes
Squash out as many intermediate changes as possible
Fix any bugs introduced into new API and squash changes

Known limitations:
Due to the I2S MCLK1 being hidden completely behind the bdw platform device and changes being introduced post 3.14 that disable the clock on supsned, there is no way to prevent it the clock from suspending before the codec in an acceptable abstracted fashion. The current workaround relies on userspace to the toggle the kcontrol before suspending the codec so the codec DSP shuts-down with the MCLK still active. If this doesn't happen, the writes are ignored as the codec is still in DSP mode and has no clock, therefore corrupting the regmap. In order to recover the state, the pcm needs to be closed and opened again in this state. Any input on this issue would be greatly appreciated.

It is easy to read code if it is cleanly using paired function/naming, like start <-> stop, register <-> unregister, etc, etc. But, current ALSA SoC code is very random, unbalance, not paired, etc. It is easy to create bug at the such code, and it will be difficult to debug. From function name point of view, "soc_post_component_init()" sounds like "component initialize function". But in reality it is rtd setup function. This patch renames soc_post_component_init() to soc_rtd_init() Signed-off-by: Kuninori Morimoto <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>

Fix sparse warnings: sound/soc/sof/imx/imx8.c:104:6: warning: symbol 'imx8_dsp_handle_reply' was not declared. Should it be static? sound/soc/sof/imx/imx8.c:115:6: warning: symbol 'imx8_dsp_handle_request' was not declared. Should it be static? sound/soc/sof/imx/imx8.c:336:5: warning: symbol 'imx8_get_bar_index' was not declared. Should it be static? sound/soc/sof/imx/imx8.c:341:6: warning: symbol 'imx8_ipc_msg_data' was not declared. Should it be static? sound/soc/sof/imx/imx8.c:348:5: warning: symbol 'imx8_ipc_pcm_params' was not declared. Should it be static? Reported-by: Hulk Robot <[email protected]> Signed-off-by: YueHaibing <[email protected]> Reviewed-by: Daniel Baluta <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>

This platform device is registered from "fsl_audmix", which is its parent device. If use pdev->dev.parent for the priv->card.dev, the value set by dev_set_drvdata in parent device will be covered by the value in child device. Fixes: b86ef53 ("ASoC: fsl: Add Audio Mixer machine driver") Signed-off-by: Viorel Suman <[email protected]> Signed-off-by: Shengjiu Wang <[email protected]> Reviewed-by: Daniel Baluta <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>

This reverts commit 3e9acd7 (ASoC: sun4i-i2s: Remove duplicated quirks structure"). It turns out that while one I2S controller is described in the A83t datasheet, the driver supports another, undocumented, one that has been inherited from the older SoCs, while the documented one uses the new design. Fixes: 3e9acd7 ("ASoC: sun4i-i2s: Remove duplicated quirks structure") Signed-off-by: Maxime Ripard <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>

Remove unused variable mt8183_mt6358_ts3a227_max98357_dapm_widgets and mt8183_mt6358_ts3a227_max98357_dapm_routes. They are accidentially included when rebasing commits. Fixes: 6191cbd ("ASoC: mediatek: mt8183: switch tdm pins gpio function when playback on or off") Signed-off-by: Tzung-Bi Shih <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>

In case of error, the function devm_ioremap_wc() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: 202acc5 ("ASoC: SOF: imx: Add i.MX8 HW support") Signed-off-by: Wei Yongjun <[email protected]> Reviewed-by: Daniel Baluta <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>

The last set of reworks included some fixes to change the A83t behaviour and "fix" it. It turns out that the controller described in the datasheet and the one supported here are not the same, yet the A83t has the two of them, and the one supported in the driver wasn't the one described in the datasheet. Fix this by reintroducing the proper quirks. Fixes: 69e450e ("ASoC: sun4i-i2s: Fix the LRCK period on A83t") Fixes: bf943d5 ("ASoC: sun4i-i2s: Fix MCLK Enable bit offset on A83t") Fixes: 2e04fc4 ("ASoC: sun4i-i2s: Fix WSS and SR fields for the A83t") Fixes: 515fcfb ("ASoC: sun4i-i2s: Fix LRCK and BCLK polarity offsets on newer SoCs") Fixes: c1d3a92 ("ASoC: sun4i-i2s: Fix the MCLK and BCLK dividers on newer SoCs") Fixes: fb19739 ("ASoC: sun4i-i2s: Use module clock as BCLK parent on newer SoCs") Fixes: 71137bc ("ASoC: sun4i-i2s: Move the format configuration to a callback") Fixes: d70be62 ("ASoC: sun4i-i2s: Move the channel configuration to a callback") Reported-by: Chen-Yu Tsai <[email protected]> Tested-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>

The device_link_add() function only returns NULL on error, it doesn't return error pointers. Fixes: 202acc5 ("ASoC: SOF: imx: Add i.MX8 HW support") Signed-off-by: Dan Carpenter <[email protected]> Reviewed-by: Daniel Baluta <[email protected]> Link: https://lore.kernel.org/r/20190826131855.GA6840@mwanda Signed-off-by: Mark Brown <[email protected]>

When we are printing module params, we were actually printing module id instead of type, but debug message was saying that number we get is type. So print module type, as it is useful when debugging paths, but also keep printing module id, as it is used in all other logs. Signed-off-by: Amadeusz Sławiński <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Pierre-Louis Bossart <[email protected]> Signed-off-by: Mark Brown <[email protected]>

Currently topology is kept in memory while driver is running. It's unnecessary, as it's only needed during parsing. Signed-off-by: Amadeusz Sławiński <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Pierre-Louis Bossart <[email protected]> Signed-off-by: Mark Brown <[email protected]>

Use force_suspend/resume to make sure clocks are disabled/enabled accordingly during system suspend/resume. Signed-off-by: Dong Aisheng <[email protected]> Signed-off-by: Shengjiu Wang <[email protected]> Reviewed-by: Daniel Baluta <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>

Allow SSC to be used on platforms described using audio-graph-card in Device Tree. Signed-off-by: Michał Mirosław <[email protected]> Reviewed-by: Codrin Ciubotariu <[email protected]> Acked-by: Alexandre Belloni <[email protected]> Link: https://lore.kernel.org/r/233d5461f4448df151755de7b69a0cd3ad310d5c.1566677788.git.mirq-linux@rere.qmqm.pl Signed-off-by: Mark Brown <[email protected]>

Rework DAI format calculation in preparation for adding more formats later. As a side-effect this enables all CBM/CBS x CFM/CFS combinations for supported formats. (Note: the additional modes are not tested.) Note: this changes FSEDGE to POSITIVE for I2S CBM_CFS mode as the TXSYN interrupt is not used anyway. Signed-off-by: Michał Mirosław <[email protected]> Link: https://lore.kernel.org/r/f5949b0326fdcdca072f3ed03f77de9e207631cd.1566677788.git.mirq-linux@rere.qmqm.pl Signed-off-by: Mark Brown <[email protected]>

Enable support for left-justified data mode for SSC-codec link. Signed-off-by: Michał Mirosław <[email protected]> Reviewed-by: Codrin Ciubotariu <[email protected]> Link: https://lore.kernel.org/r/44fa6b700421e80778f20ff9ead2b148cf6d2e92.1566677788.git.mirq-linux@rere.qmqm.pl Signed-off-by: Mark Brown <[email protected]>

This patch refined tdm driver code, and allow tdm hw to support two configurations in machine driver to output tdm signal or i2s signal. Signed-off-by: Jiaxin Yu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>

This patch correct tdm out bck inverse register to AUDIO_TOP_CON3[3]. Signed-off-by: Jiaxin Yu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>

Most of the modern codecs supports 352.8KHz and 384KHz sample rates. Currenlty HW params fails to set 352.8Kz and 384KHz sample rate as these are not in known rates list. Add these new rates to known list to allow them. This patch also adds defines in pcm.h so that drivers can use it. Signed-off-by: Vidyakumar Athota <[email protected]> Signed-off-by: Banajit Goswami <[email protected]> Signed-off-by: Srinivas Kandagatla <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>

On this codec SLIMBus RX path supports 384000 rate on primary interpolator. Add this missing rate as supported rate. Signed-off-by: Srinivas Kandagatla <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>

dgreid

overall seems good to me, but I just skimmed most of it.

sound/soc/codecs/rt5677-spi.c

dgreid · 2019-08-29T02:21:03Z

sound/soc/codecs/rt5677.c

 	if (on && !activity) {
 		activity = true;

-		regcache_cache_only(rt5677->regmap, false);


Were these cache controls not needed anyways?

I will track down the history and quash out if needed

ASP/McBSP can support 8/16/20/24/32 bits word in theory. I have only tested S16_LE and S32_LE, the other formats might not work so only extend the supported formats with S32_LE for now. Signed-off-by: Peter Ujfalusi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>

Most of the daVinci devices does not boot with DT. In this case the DMA channel is looked up with dma_slave_map and for that the chan_names[] must be configured. Both McASP and ASP/McBSP uses "tx" and "rx" as channel names, so we can just do this when the dev->of_node is not valid. Signed-off-by: Peter Ujfalusi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>

…TSUPP The davinci McBSP (davinci-i2s) driver does not implement the set_sysclk callback, which is fine and should not be treated as error. Signed-off-by: Peter Ujfalusi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>

Apart from Haswell machines, all other devices have their private data set to snd_soc_acpi_mach instance. Changes for HSW/ BDW boards introduced with series: https://patchwork.kernel.org/cover/10782035/ added support for dai_link platform_name adjustments within card probe routines. These take for granted private_data points to snd_soc_acpi_mach whereas for Haswell, it's sst_pdata instead. Change private context of platform_device - representing machine board - to address this. Fixes: e87055d ("ASoC: Intel: haswell: platform name fixup support") Fixes: 7e40ddc ("ASoC: Intel: bdw-rt5677: platform name fixup support") Fixes: 2d067b2 ("ASoC: Intel: broadwell: platform name fixup support") Signed-off-by: Cezary Rojewski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Tested-by: Pierre-Louis Bossart <[email protected]> Signed-off-by: Mark Brown <[email protected]>

With legacy ADSP private context adjusted, there is no need for double safety. Signed-off-by: Cezary Rojewski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Tested-by: Pierre-Louis Bossart <[email protected]> Signed-off-by: Mark Brown <[email protected]>

We should only select SND_INTEL_NHLT when ACPI is defined. This was done for the legacy HDAudio driver but not for DSP-enabled cases, leading to compilation errors with randconfig. Fix by aligning on the same solution. For the Skylake driver this is overkill since there is a top-level dependency on ACPI, but it doesn't hurt and it's better to have consistency. Fixes: 68b953a ('ASoC: SOF: Intel: hda: fixup HDaudio topology name with DMIC number') Reported-by: Randy Dunlap <[email protected]> Signed-off-by: Pierre-Louis Bossart <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>

Move private structure to the beginning of file to declare earlier so that most functions can see it. Signed-off-by: Tzung-Bi Shih <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>

Move headset jack descriptor from module global scope to card-specific storage to make its ownership more explicit. Signed-off-by: Tzung-Bi Shih <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>

The forward declaration of mt8183_mt6358_ts3a227_max98357_headset_init is for cyclic dependency between card, headset_dev, and headset_init. It used to be: - card depends on headset_dev - headset_dev depends on headset_init - headset_init depends on card Commit a962a80 ("ASoC: mediatek: mt8183: make headset codec optional") removed the cyclic dependency. Thus, it is safe to remove the forward declaration. Signed-off-by: Tzung-Bi Shih <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>

rmnet_get_port() internally calls rcu_dereference_rtnl(), which checks RTNL. But rmnet_get_port() could be called by packet path. The packet path is not protected by RTNL. So, the suspicious RCU usage problem occurs. Test commands: modprobe rmnet ip netns add nst ip link add veth0 type veth peer name veth1 ip link set veth1 netns nst ip link add rmnet0 link veth0 type rmnet mux_id 1 ip netns exec nst ip link add rmnet1 link veth1 type rmnet mux_id 1 ip netns exec nst ip link set veth1 up ip netns exec nst ip link set rmnet1 up ip netns exec nst ip a a 192.168.100.2/24 dev rmnet1 ip link set veth0 up ip link set rmnet0 up ip a a 192.168.100.1/24 dev rmnet0 ping 192.168.100.2 Splat looks like: [ 146.630958][ T1174] WARNING: suspicious RCU usage [ 146.631735][ T1174] 5.6.0-rc1+ thesofproject#447 Not tainted [ 146.632387][ T1174] ----------------------------- [ 146.633151][ T1174] drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c:386 suspicious rcu_dereference_check() ! [ 146.634742][ T1174] [ 146.634742][ T1174] other info that might help us debug this: [ 146.634742][ T1174] [ 146.645992][ T1174] [ 146.645992][ T1174] rcu_scheduler_active = 2, debug_locks = 1 [ 146.646937][ T1174] 5 locks held by ping/1174: [ 146.647609][ T1174] #0: ffff8880c31dea70 (sk_lock-AF_INET){+.+.}, at: raw_sendmsg+0xab8/0x2980 [ 146.662463][ T1174] #1: ffffffff93925660 (rcu_read_lock_bh){....}, at: ip_finish_output2+0x243/0x2150 [ 146.671696][ T1174] #2: ffffffff93925660 (rcu_read_lock_bh){....}, at: __dev_queue_xmit+0x213/0x2940 [ 146.673064][ T1174] #3: ffff8880c19ecd58 (&dev->qdisc_running_key#7){+...}, at: ip_finish_output2+0x714/0x2150 [ 146.690358][ T1174] thesofproject#4: ffff8880c5796898 (&dev->qdisc_xmit_lock_key#3){+.-.}, at: sch_direct_xmit+0x1e2/0x1020 [ 146.699875][ T1174] [ 146.699875][ T1174] stack backtrace: [ 146.701091][ T1174] CPU: 0 PID: 1174 Comm: ping Not tainted 5.6.0-rc1+ thesofproject#447 [ 146.705215][ T1174] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 146.706565][ T1174] Call Trace: [ 146.707102][ T1174] dump_stack+0x96/0xdb [ 146.708007][ T1174] rmnet_get_port.part.9+0x76/0x80 [rmnet] [ 146.709233][ T1174] rmnet_egress_handler+0x107/0x420 [rmnet] [ 146.710492][ T1174] ? sch_direct_xmit+0x1e2/0x1020 [ 146.716193][ T1174] rmnet_vnd_start_xmit+0x3d/0xa0 [rmnet] [ 146.717012][ T1174] dev_hard_start_xmit+0x160/0x740 [ 146.717854][ T1174] sch_direct_xmit+0x265/0x1020 [ 146.718577][ T1174] ? register_lock_class+0x14d0/0x14d0 [ 146.719429][ T1174] ? dev_watchdog+0xac0/0xac0 [ 146.723738][ T1174] ? __dev_queue_xmit+0x15fd/0x2940 [ 146.724469][ T1174] ? lock_acquire+0x164/0x3b0 [ 146.725172][ T1174] __dev_queue_xmit+0x20c7/0x2940 [ ... ] Fixes: ceed73a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation") Signed-off-by: Taehee Yoo <[email protected]> Signed-off-by: David S. Miller <[email protected]>

journal_head::b_transaction and journal_head::b_next_transaction could be accessed concurrently as noticed by KCSAN, LTP: starting fsync04 /dev/zero: Can't open blockdev EXT4-fs (loop0): mounting ext3 file system using the ext4 subsystem EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null) ================================================================== BUG: KCSAN: data-race in __jbd2_journal_refile_buffer [jbd2] / jbd2_write_access_granted [jbd2] write to 0xffff99f9b1bd0e30 of 8 bytes by task 25721 on cpu 70: __jbd2_journal_refile_buffer+0xdd/0x210 [jbd2] __jbd2_journal_refile_buffer at fs/jbd2/transaction.c:2569 jbd2_journal_commit_transaction+0x2d15/0x3f20 [jbd2] (inlined by) jbd2_journal_commit_transaction at fs/jbd2/commit.c:1034 kjournald2+0x13b/0x450 [jbd2] kthread+0x1cd/0x1f0 ret_from_fork+0x27/0x50 read to 0xffff99f9b1bd0e30 of 8 bytes by task 25724 on cpu 68: jbd2_write_access_granted+0x1b2/0x250 [jbd2] jbd2_write_access_granted at fs/jbd2/transaction.c:1155 jbd2_journal_get_write_access+0x2c/0x60 [jbd2] __ext4_journal_get_write_access+0x50/0x90 [ext4] ext4_mb_mark_diskspace_used+0x158/0x620 [ext4] ext4_mb_new_blocks+0x54f/0xca0 [ext4] ext4_ind_map_blocks+0xc79/0x1b40 [ext4] ext4_map_blocks+0x3b4/0x950 [ext4] _ext4_get_block+0xfc/0x270 [ext4] ext4_get_block+0x3b/0x50 [ext4] __block_write_begin_int+0x22e/0xae0 __block_write_begin+0x39/0x50 ext4_write_begin+0x388/0xb50 [ext4] generic_perform_write+0x15d/0x290 ext4_buffered_write_iter+0x11f/0x210 [ext4] ext4_file_write_iter+0xce/0x9e0 [ext4] new_sync_write+0x29c/0x3b0 __vfs_write+0x92/0xa0 vfs_write+0x103/0x260 ksys_write+0x9d/0x130 __x64_sys_write+0x4c/0x60 do_syscall_64+0x91/0xb05 entry_SYSCALL_64_after_hwframe+0x49/0xbe 5 locks held by fsync04/25724: #0: ffff99f9911093f8 (sb_writers#13){.+.+}, at: vfs_write+0x21c/0x260 #1: ffff99f9db4c0348 (&sb->s_type->i_mutex_key#15){+.+.}, at: ext4_buffered_write_iter+0x65/0x210 [ext4] #2: ffff99f5e7dfcf58 (jbd2_handle){++++}, at: start_this_handle+0x1c1/0x9d0 [jbd2] #3: ffff99f9db4c0168 (&ei->i_data_sem){++++}, at: ext4_map_blocks+0x176/0x950 [ext4] thesofproject#4: ffffffff99086b40 (rcu_read_lock){....}, at: jbd2_write_access_granted+0x4e/0x250 [jbd2] irq event stamp: 1407125 hardirqs last enabled at (1407125): [<ffffffff980da9b7>] __find_get_block+0x107/0x790 hardirqs last disabled at (1407124): [<ffffffff980da8f9>] __find_get_block+0x49/0x790 softirqs last enabled at (1405528): [<ffffffff98a0034c>] __do_softirq+0x34c/0x57c softirqs last disabled at (1405521): [<ffffffff97cc67a2>] irq_exit+0xa2/0xc0 Reported by Kernel Concurrency Sanitizer on: CPU: 68 PID: 25724 Comm: fsync04 Tainted: G L 5.6.0-rc2-next-20200221+ thesofproject#7 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019 The plain reads are outside of jh->b_state_lock critical section which result in data races. Fix them by adding pairs of READ|WRITE_ONCE(). Reviewed-by: Jan Kara <[email protected]> Signed-off-by: Qian Cai <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Theodore Ts'o <[email protected]>

Making this IS_REACHABLE() was still wrong, as that just determines whether the lower-level backlight code would be reachable from the panel driver. However, with CONFIG_DRM=y and CONFIG_BACKLIGHT_CLASS_DEVICE=m, the drm_panel_of_backlight is left out of drm_panel.o but the condition tells the driver that it is there, leading to multiple link errors such as ERROR: "drm_panel_of_backlight" [drivers/gpu/drm/panel/panel-sitronix-st7701.ko] undefined! ERROR: "drm_panel_of_backlight" [drivers/gpu/drm/panel/panel-sharp-ls043t1le01.ko] undefined! ERROR: "drm_panel_of_backlight" [drivers/gpu/drm/panel/panel-seiko-43wvf1g.ko] undefined! ERROR: "drm_panel_of_backlight" [drivers/gpu/drm/panel/panel-ronbo-rb070d30.ko] undefined! ERROR: "drm_panel_of_backlight" [drivers/gpu/drm/panel/panel-rocktech-jh057n00900.ko] undefined! ERROR: "drm_panel_of_backlight" [drivers/gpu/drm/panel/panel-panasonic-vvx10f034n00.ko] undefined! ERROR: "drm_panel_of_backlight" [drivers/gpu/drm/panel/panel-osd-osd101t2587-53ts.ko] undefined! Change the condition to check for whether the function was actually part of the drm module. This version of the patch survived a few hundred randconfig builds, so I have a good feeling this might be the last one for the export. Fixes: 4a34a9d ("drm/drm_panel: Fix EXPORT of drm_panel_of_backlight() one more time") Fixes: 907aa26 ("drm/drm_panel: fix EXPORT of drm_panel_of_backlight") Fixes: 152dbde ("drm/panel: add backlight support") Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 8d6cb2f) BUG=b:135067265 TEST=build kukui 5.4 Signed-off-by: Linux Patches Robot <linux-patches-robot@chromeos-missing-patches.google.com.iam.gserviceaccount.com> Change-Id: I8e3a317bd82522f10ecf446b8aad1d00fd396cd9 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/kernel/+/2142357 Reviewed-by: Sean Paul <[email protected]> Reviewed-by: Hsin-Yi Wang <[email protected]> Reviewed-by: Stéphane Marchesin <[email protected]> Commit-Queue: Guenter Roeck <[email protected]> Tested-by: Guenter Roeck <[email protected]>

…init sequences The Slave device initialization can be split in 4 different cases: 1. Master-initiated hardware reset, system suspend-resume and pm_runtime based on clock-stop mode1. To avoid timeouts and a bad audio experience, the Slave device resume operations need to wait for the Slave device to be re-enumerated and its settings restored. 2. Exit from clock-stop mode0. In this case, the Slave device is required to remain enumerated and its context preserved while the clock is stopped, so no re-initialization or wait_for_completion() is necessary. 3. Slave-initiated pm_runtime D3 transition. With the parent child relationship, it is possible that a Slave device becomes 'suspended' while its parent is still 'active' with the bus clock still toggling. In this case, during the pm_runtime resume operation, there is no need to wait for any settings to be restored. 4. Slave reset (sync loss or implementation-defined). In that case the bus remains operational and the Slave device will be re-initialized when it becomes ATTACHED again. In previous patches, we suggested the use of wait_for_completion() to deal with the case #1, but case #2 and #3 do not need any wait. To account for those differences, this patch adds an unattach_request field. The field is explicitly set by the Master for the case #1, and if non-zero the Slave device shall wait on resume. In all other cases, the Slave resume operations can proceed without wait. The only request tracked so far is Master HardReset, but the request is declared as a bit mask for future extensions (if needed). The definition for this value is added in bus.h and does not need to be exposed in sdw.h Signed-off-by: Pierre-Louis Bossart <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]> (cherry picked from commit b2bd75f) Signed-off-by: Chintan Patel <[email protected]> BUG=b:153422295 TEST=No audio regression on TGL/JSL devices Change-Id: I50ef8dca95e10994fa9b3ad024745f776fca6cc1

…init sequences The Slave device initialization can be split in 4 different cases: 1. Master-initiated hardware reset, system suspend-resume and pm_runtime based on clock-stop mode1. To avoid timeouts and a bad audio experience, the Slave device resume operations need to wait for the Slave device to be re-enumerated and its settings restored. 2. Exit from clock-stop mode0. In this case, the Slave device is required to remain enumerated and its context preserved while the clock is stopped, so no re-initialization or wait_for_completion() is necessary. 3. Slave-initiated pm_runtime D3 transition. With the parent child relationship, it is possible that a Slave device becomes 'suspended' while its parent is still 'active' with the bus clock still toggling. In this case, during the pm_runtime resume operation, there is no need to wait for any settings to be restored. 4. Slave reset (sync loss or implementation-defined). In that case the bus remains operational and the Slave device will be re-initialized when it becomes ATTACHED again. In previous patches, we suggested the use of wait_for_completion() to deal with the case #1, but case #2 and #3 do not need any wait. To account for those differences, this patch adds an unattach_request field. The field is explicitly set by the Master for the case #1, and if non-zero the Slave device shall wait on resume. In all other cases, the Slave resume operations can proceed without wait. The only request tracked so far is Master HardReset, but the request is declared as a bit mask for future extensions (if needed). The definition for this value is added in bus.h and does not need to be exposed in sdw.h Signed-off-by: Pierre-Louis Bossart <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]> (cherry picked from commit b2bd75f) Signed-off-by: Chintan Patel <[email protected]> BUG=b:153422295 TEST=No audio regression on TGL/JSL devices Change-Id: I50ef8dca95e10994fa9b3ad024745f776fca6cc1 Signed-off-by: Curtis Malainey <[email protected]>

commit 28936b6 upstream. inode->i_blocks could be accessed concurrently as noticed by KCSAN, BUG: KCSAN: data-race in ext4_do_update_inode [ext4] / inode_add_bytes write to 0xffff9a00d4b982d0 of 8 bytes by task 22100 on cpu 118: inode_add_bytes+0x65/0xf0 __inode_add_bytes at fs/stat.c:689 (inlined by) inode_add_bytes at fs/stat.c:702 ext4_mb_new_blocks+0x418/0xca0 [ext4] ext4_ext_map_blocks+0x1a6b/0x27b0 [ext4] ext4_map_blocks+0x1a9/0x950 [ext4] _ext4_get_block+0xfc/0x270 [ext4] ext4_get_block_unwritten+0x33/0x50 [ext4] __block_write_begin_int+0x22e/0xae0 __block_write_begin+0x39/0x50 ext4_write_begin+0x388/0xb50 [ext4] ext4_da_write_begin+0x35f/0x8f0 [ext4] generic_perform_write+0x15d/0x290 ext4_buffered_write_iter+0x11f/0x210 [ext4] ext4_file_write_iter+0xce/0x9e0 [ext4] new_sync_write+0x29c/0x3b0 __vfs_write+0x92/0xa0 vfs_write+0x103/0x260 ksys_write+0x9d/0x130 __x64_sys_write+0x4c/0x60 do_syscall_64+0x91/0xb05 entry_SYSCALL_64_after_hwframe+0x49/0xbe read to 0xffff9a00d4b982d0 of 8 bytes by task 8 on cpu 65: ext4_do_update_inode+0x4a0/0xf60 [ext4] ext4_inode_blocks_set at fs/ext4/inode.c:4815 ext4_mark_iloc_dirty+0xaf/0x160 [ext4] ext4_mark_inode_dirty+0x129/0x3e0 [ext4] ext4_convert_unwritten_extents+0x253/0x2d0 [ext4] ext4_convert_unwritten_io_end_vec+0xc5/0x150 [ext4] ext4_end_io_rsv_work+0x22c/0x350 [ext4] process_one_work+0x54f/0xb90 worker_thread+0x80/0x5f0 kthread+0x1cd/0x1f0 ret_from_fork+0x27/0x50 4 locks held by kworker/u256:0/8: #0: ffff9a025abc4328 ((wq_completion)ext4-rsv-conversion){+.+.}, at: process_one_work+0x443/0xb90 #1: ffffab5a862dbe20 ((work_completion)(&ei->i_rsv_conversion_work)){+.+.}, at: process_one_work+0x443/0xb90 #2: ffff9a025a9d0f58 (jbd2_handle){++++}, at: start_this_handle+0x1c1/0x9d0 [jbd2] #3: ffff9a00d4b985d8 (&(&ei->i_raw_lock)->rlock){+.+.}, at: ext4_do_update_inode+0xaa/0xf60 [ext4] irq event stamp: 3009267 hardirqs last enabled at (3009267): [<ffffffff980da9b7>] __find_get_block+0x107/0x790 hardirqs last disabled at (3009266): [<ffffffff980da8f9>] __find_get_block+0x49/0x790 softirqs last enabled at (3009230): [<ffffffff98a0034c>] __do_softirq+0x34c/0x57c softirqs last disabled at (3009223): [<ffffffff97cc67a2>] irq_exit+0xa2/0xc0 Reported by Kernel Concurrency Sanitizer on: CPU: 65 PID: 8 Comm: kworker/u256:0 Tainted: G L 5.6.0-rc2-next-20200221+ thesofproject#7 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019 Workqueue: ext4-rsv-conversion ext4_end_io_rsv_work [ext4] The plain read is outside of inode->i_lock critical section which results in a data race. Fix it by adding READ_ONCE() there. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Qian Cai <[email protected]> Signed-off-by: Theodore Ts'o <[email protected]> Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit a866759 ] This reverts commit 64e62bd. This commit ends up causing some lockdep splats due to trying to grab the payload lock while holding the mgr's lock: [ 54.010099] [ 54.011765] ====================================================== [ 54.018670] WARNING: possible circular locking dependency detected [ 54.025577] 5.5.0-rc6-02274-g77381c23ee63 thesofproject#47 Not tainted [ 54.031610] ------------------------------------------------------ [ 54.038516] kworker/1:6/1040 is trying to acquire lock: [ 54.044354] ffff888272af3228 (&mgr->payload_lock){+.+.}, at: drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4 [ 54.054957] [ 54.054957] but task is already holding lock: [ 54.061473] ffff888272af3060 (&mgr->lock){+.+.}, at: drm_dp_mst_topology_mgr_set_mst+0x3c/0x2e4 [ 54.071193] [ 54.071193] which lock already depends on the new lock. [ 54.071193] [ 54.080334] [ 54.080334] the existing dependency chain (in reverse order) is: [ 54.088697] [ 54.088697] -> #1 (&mgr->lock){+.+.}: [ 54.094440] __mutex_lock+0xc3/0x498 [ 54.099015] drm_dp_mst_topology_get_port_validated+0x25/0x80 [ 54.106018] drm_dp_update_payload_part1+0xa2/0x2e2 [ 54.112051] intel_mst_pre_enable_dp+0x144/0x18f [ 54.117791] intel_encoders_pre_enable+0x63/0x70 [ 54.123532] hsw_crtc_enable+0xa1/0x722 [ 54.128396] intel_update_crtc+0x50/0x194 [ 54.133455] skl_commit_modeset_enables+0x40c/0x540 [ 54.139485] intel_atomic_commit_tail+0x5f7/0x130d [ 54.145418] intel_atomic_commit+0x2c8/0x2d8 [ 54.150770] drm_atomic_helper_set_config+0x5a/0x70 [ 54.156801] drm_mode_setcrtc+0x2ab/0x833 [ 54.161862] drm_ioctl+0x2e5/0x424 [ 54.166242] vfs_ioctl+0x21/0x2f [ 54.170426] do_vfs_ioctl+0x5fb/0x61e [ 54.175096] ksys_ioctl+0x55/0x75 [ 54.179377] __x64_sys_ioctl+0x1a/0x1e [ 54.184146] do_syscall_64+0x5c/0x6d [ 54.188721] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 54.194946] [ 54.194946] -> #0 (&mgr->payload_lock){+.+.}: [ 54.201463] [ 54.201463] other info that might help us debug this: [ 54.201463] [ 54.210410] Possible unsafe locking scenario: [ 54.210410] [ 54.217025] CPU0 CPU1 [ 54.222082] ---- ---- [ 54.227138] lock(&mgr->lock); [ 54.230643] lock(&mgr->payload_lock); [ 54.237742] lock(&mgr->lock); [ 54.244062] lock(&mgr->payload_lock); [ 54.248346] [ 54.248346] *** DEADLOCK *** [ 54.248346] [ 54.254959] 7 locks held by kworker/1:6/1040: [ 54.259822] #0: ffff888275c4f528 ((wq_completion)events){+.+.}, at: worker_thread+0x455/0x6e2 [ 54.269451] #1: ffffc9000119beb0 ((work_completion)(&(&dev_priv->hotplug.hotplug_work)->work)){+.+.}, at: worker_thread+0x455/0x6e2 [ 54.282768] #2: ffff888272a403f0 (&dev->mode_config.mutex){+.+.}, at: i915_hotplug_work_func+0x4b/0x2be [ 54.293368] #3: ffffffff824fc6c0 (drm_connector_list_iter){.+.+}, at: i915_hotplug_work_func+0x17e/0x2be [ 54.304061] thesofproject#4: ffffc9000119bc58 (crtc_ww_class_acquire){+.+.}, at: drm_helper_probe_detect_ctx+0x40/0xfd [ 54.314855] thesofproject#5: ffff888272a40470 (crtc_ww_class_mutex){+.+.}, at: drm_modeset_lock+0x74/0xe2 [ 54.324385] thesofproject#6: ffff888272af3060 (&mgr->lock){+.+.}, at: drm_dp_mst_topology_mgr_set_mst+0x3c/0x2e4 [ 54.334597] [ 54.334597] stack backtrace: [ 54.339464] CPU: 1 PID: 1040 Comm: kworker/1:6 Not tainted 5.5.0-rc6-02274-g77381c23ee63 thesofproject#47 [ 54.348893] Hardware name: Google Fizz/Fizz, BIOS Google_Fizz.10139.39.0 01/04/2018 [ 54.357451] Workqueue: events i915_hotplug_work_func [ 54.362995] Call Trace: [ 54.365724] dump_stack+0x71/0x9c [ 54.369427] check_noncircular+0x91/0xbc [ 54.373809] ? __lock_acquire+0xc9e/0xf66 [ 54.378286] ? __lock_acquire+0xc9e/0xf66 [ 54.382763] ? lock_acquire+0x175/0x1ac [ 54.387048] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4 [ 54.393177] ? __mutex_lock+0xc3/0x498 [ 54.397362] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4 [ 54.403492] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4 [ 54.409620] ? drm_dp_dpcd_access+0xd9/0x101 [ 54.414390] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4 [ 54.420517] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4 [ 54.426645] ? intel_digital_port_connected+0x34d/0x35c [ 54.432482] ? intel_dp_detect+0x227/0x44e [ 54.437056] ? ww_mutex_lock+0x49/0x9a [ 54.441242] ? drm_helper_probe_detect_ctx+0x75/0xfd [ 54.446789] ? intel_encoder_hotplug+0x4b/0x97 [ 54.451752] ? intel_ddi_hotplug+0x61/0x2e0 [ 54.456423] ? mark_held_locks+0x53/0x68 [ 54.460803] ? _raw_spin_unlock_irqrestore+0x3a/0x51 [ 54.466347] ? lockdep_hardirqs_on+0x187/0x1a4 [ 54.471310] ? drm_connector_list_iter_next+0x89/0x9a [ 54.476953] ? i915_hotplug_work_func+0x206/0x2be [ 54.482208] ? worker_thread+0x4d5/0x6e2 [ 54.486587] ? worker_thread+0x455/0x6e2 [ 54.490966] ? queue_work_on+0x64/0x64 [ 54.495151] ? kthread+0x1e9/0x1f1 [ 54.498946] ? queue_work_on+0x64/0x64 [ 54.503130] ? kthread_unpark+0x5e/0x5e [ 54.507413] ? ret_from_fork+0x3a/0x50 The proper fix for this is probably cleanup the VCPI allocations when we're enabling the topology, or on the first payload allocation. For now though, let's just revert. Signed-off-by: Lyude Paul <[email protected]> Fixes: 64e62bd ("drm/dp_mst: Remove VCPI while disabling topology mgr") Cc: Sean Paul <[email protected]> Cc: Wayne Lin <[email protected]> Reviewed-by: Sean Paul <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Sasha Levin <[email protected]>

…init sequences The Slave device initialization can be split in 4 different cases: 1. Master-initiated hardware reset, system suspend-resume and pm_runtime based on clock-stop mode1. To avoid timeouts and a bad audio experience, the Slave device resume operations need to wait for the Slave device to be re-enumerated and its settings restored. 2. Exit from clock-stop mode0. In this case, the Slave device is required to remain enumerated and its context preserved while the clock is stopped, so no re-initialization or wait_for_completion() is necessary. 3. Slave-initiated pm_runtime D3 transition. With the parent child relationship, it is possible that a Slave device becomes 'suspended' while its parent is still 'active' with the bus clock still toggling. In this case, during the pm_runtime resume operation, there is no need to wait for any settings to be restored. 4. Slave reset (sync loss or implementation-defined). In that case the bus remains operational and the Slave device will be re-initialized when it becomes ATTACHED again. In previous patches, we suggested the use of wait_for_completion() to deal with the case #1, but case #2 and #3 do not need any wait. To account for those differences, this patch adds an unattach_request field. The field is explicitly set by the Master for the case #1, and if non-zero the Slave device shall wait on resume. In all other cases, the Slave resume operations can proceed without wait. The only request tracked so far is Master HardReset, but the request is declared as a bit mask for future extensions (if needed). The definition for this value is added in bus.h and does not need to be exposed in sdw.h Signed-off-by: Pierre-Louis Bossart <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]> (cherry picked from commit b2bd75f) Signed-off-by: Chintan Patel <[email protected]> BUG=b:153422295 TEST=No audio regression on TGL/JSL devices Signed-off-by: Curtis Malainey <[email protected]>

commit d3ec10a upstream. A lockdep circular locking dependency report was seen when running a keyutils test: [12537.027242] ====================================================== [12537.059309] WARNING: possible circular locking dependency detected [12537.088148] 4.18.0-147.7.1.el8_1.x86_64+debug #1 Tainted: G OE --------- - - [12537.125253] ------------------------------------------------------ [12537.153189] keyctl/25598 is trying to acquire lock: [12537.175087] 000000007c39f96c (&mm->mmap_sem){++++}, at: __might_fault+0xc4/0x1b0 [12537.208365] [12537.208365] but task is already holding lock: [12537.234507] 000000003de5b58d (&type->lock_class){++++}, at: keyctl_read_key+0x15a/0x220 [12537.270476] [12537.270476] which lock already depends on the new lock. [12537.270476] [12537.307209] [12537.307209] the existing dependency chain (in reverse order) is: [12537.340754] [12537.340754] -> #3 (&type->lock_class){++++}: [12537.367434] down_write+0x4d/0x110 [12537.385202] __key_link_begin+0x87/0x280 [12537.405232] request_key_and_link+0x483/0xf70 [12537.427221] request_key+0x3c/0x80 [12537.444839] dns_query+0x1db/0x5a5 [dns_resolver] [12537.468445] dns_resolve_server_name_to_ip+0x1e1/0x4d0 [cifs] [12537.496731] cifs_reconnect+0xe04/0x2500 [cifs] [12537.519418] cifs_readv_from_socket+0x461/0x690 [cifs] [12537.546263] cifs_read_from_socket+0xa0/0xe0 [cifs] [12537.573551] cifs_demultiplex_thread+0x311/0x2db0 [cifs] [12537.601045] kthread+0x30c/0x3d0 [12537.617906] ret_from_fork+0x3a/0x50 [12537.636225] [12537.636225] -> #2 (root_key_user.cons_lock){+.+.}: [12537.664525] __mutex_lock+0x105/0x11f0 [12537.683734] request_key_and_link+0x35a/0xf70 [12537.705640] request_key+0x3c/0x80 [12537.723304] dns_query+0x1db/0x5a5 [dns_resolver] [12537.746773] dns_resolve_server_name_to_ip+0x1e1/0x4d0 [cifs] [12537.775607] cifs_reconnect+0xe04/0x2500 [cifs] [12537.798322] cifs_readv_from_socket+0x461/0x690 [cifs] [12537.823369] cifs_read_from_socket+0xa0/0xe0 [cifs] [12537.847262] cifs_demultiplex_thread+0x311/0x2db0 [cifs] [12537.873477] kthread+0x30c/0x3d0 [12537.890281] ret_from_fork+0x3a/0x50 [12537.908649] [12537.908649] -> #1 (&tcp_ses->srv_mutex){+.+.}: [12537.935225] __mutex_lock+0x105/0x11f0 [12537.954450] cifs_call_async+0x102/0x7f0 [cifs] [12537.977250] smb2_async_readv+0x6c3/0xc90 [cifs] [12538.000659] cifs_readpages+0x120a/0x1e50 [cifs] [12538.023920] read_pages+0xf5/0x560 [12538.041583] __do_page_cache_readahead+0x41d/0x4b0 [12538.067047] ondemand_readahead+0x44c/0xc10 [12538.092069] filemap_fault+0xec1/0x1830 [12538.111637] __do_fault+0x82/0x260 [12538.129216] do_fault+0x419/0xfb0 [12538.146390] __handle_mm_fault+0x862/0xdf0 [12538.167408] handle_mm_fault+0x154/0x550 [12538.187401] __do_page_fault+0x42f/0xa60 [12538.207395] do_page_fault+0x38/0x5e0 [12538.225777] page_fault+0x1e/0x30 [12538.243010] [12538.243010] -> #0 (&mm->mmap_sem){++++}: [12538.267875] lock_acquire+0x14c/0x420 [12538.286848] __might_fault+0x119/0x1b0 [12538.306006] keyring_read_iterator+0x7e/0x170 [12538.327936] assoc_array_subtree_iterate+0x97/0x280 [12538.352154] keyring_read+0xe9/0x110 [12538.370558] keyctl_read_key+0x1b9/0x220 [12538.391470] do_syscall_64+0xa5/0x4b0 [12538.410511] entry_SYSCALL_64_after_hwframe+0x6a/0xdf [12538.435535] [12538.435535] other info that might help us debug this: [12538.435535] [12538.472829] Chain exists of: [12538.472829] &mm->mmap_sem --> root_key_user.cons_lock --> &type->lock_class [12538.472829] [12538.524820] Possible unsafe locking scenario: [12538.524820] [12538.551431] CPU0 CPU1 [12538.572654] ---- ---- [12538.595865] lock(&type->lock_class); [12538.613737] lock(root_key_user.cons_lock); [12538.644234] lock(&type->lock_class); [12538.672410] lock(&mm->mmap_sem); [12538.687758] [12538.687758] *** DEADLOCK *** [12538.687758] [12538.714455] 1 lock held by keyctl/25598: [12538.732097] #0: 000000003de5b58d (&type->lock_class){++++}, at: keyctl_read_key+0x15a/0x220 [12538.770573] [12538.770573] stack backtrace: [12538.790136] CPU: 2 PID: 25598 Comm: keyctl Kdump: loaded Tainted: G [12538.844855] Hardware name: HP ProLiant DL360 Gen9/ProLiant DL360 Gen9, BIOS P89 12/27/2015 [12538.881963] Call Trace: [12538.892897] dump_stack+0x9a/0xf0 [12538.907908] print_circular_bug.isra.25.cold.50+0x1bc/0x279 [12538.932891] ? save_trace+0xd6/0x250 [12538.948979] check_prev_add.constprop.32+0xc36/0x14f0 [12538.971643] ? keyring_compare_object+0x104/0x190 [12538.992738] ? check_usage+0x550/0x550 [12539.009845] ? sched_clock+0x5/0x10 [12539.025484] ? sched_clock_cpu+0x18/0x1e0 [12539.043555] __lock_acquire+0x1f12/0x38d0 [12539.061551] ? trace_hardirqs_on+0x10/0x10 [12539.080554] lock_acquire+0x14c/0x420 [12539.100330] ? __might_fault+0xc4/0x1b0 [12539.119079] __might_fault+0x119/0x1b0 [12539.135869] ? __might_fault+0xc4/0x1b0 [12539.153234] keyring_read_iterator+0x7e/0x170 [12539.172787] ? keyring_read+0x110/0x110 [12539.190059] assoc_array_subtree_iterate+0x97/0x280 [12539.211526] keyring_read+0xe9/0x110 [12539.227561] ? keyring_gc_check_iterator+0xc0/0xc0 [12539.249076] keyctl_read_key+0x1b9/0x220 [12539.266660] do_syscall_64+0xa5/0x4b0 [12539.283091] entry_SYSCALL_64_after_hwframe+0x6a/0xdf One way to prevent this deadlock scenario from happening is to not allow writing to userspace while holding the key semaphore. Instead, an internal buffer is allocated for getting the keys out from the read method first before copying them out to userspace without holding the lock. That requires taking out the __user modifier from all the relevant read methods as well as additional changes to not use any userspace write helpers. That is, 1) The put_user() call is replaced by a direct copy. 2) The copy_to_user() call is replaced by memcpy(). 3) All the fault handling code is removed. Compiling on a x86-64 system, the size of the rxrpc_read() function is reduced from 3795 bytes to 2384 bytes with this patch. Fixes: ^1da177e4c3f4 ("Linux-2.6.12-rc2") Reviewed-by: Jarkko Sakkinen <[email protected]> Signed-off-by: Waiman Long <[email protected]> Signed-off-by: David Howells <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

…init sequences The Slave device initialization can be split in 4 different cases: 1. Master-initiated hardware reset, system suspend-resume and pm_runtime based on clock-stop mode1. To avoid timeouts and a bad audio experience, the Slave device resume operations need to wait for the Slave device to be re-enumerated and its settings restored. 2. Exit from clock-stop mode0. In this case, the Slave device is required to remain enumerated and its context preserved while the clock is stopped, so no re-initialization or wait_for_completion() is necessary. 3. Slave-initiated pm_runtime D3 transition. With the parent child relationship, it is possible that a Slave device becomes 'suspended' while its parent is still 'active' with the bus clock still toggling. In this case, during the pm_runtime resume operation, there is no need to wait for any settings to be restored. 4. Slave reset (sync loss or implementation-defined). In that case the bus remains operational and the Slave device will be re-initialized when it becomes ATTACHED again. In previous patches, we suggested the use of wait_for_completion() to deal with the case #1, but case #2 and #3 do not need any wait. To account for those differences, this patch adds an unattach_request field. The field is explicitly set by the Master for the case #1, and if non-zero the Slave device shall wait on resume. In all other cases, the Slave resume operations can proceed without wait. The only request tracked so far is Master HardReset, but the request is declared as a bit mask for future extensions (if needed). The definition for this value is added in bus.h and does not need to be exposed in sdw.h Signed-off-by: Pierre-Louis Bossart <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]> (cherry picked from commit b2bd75f) Signed-off-by: Chintan Patel <[email protected]> BUG=b:153422295 TEST=No audio regression on TGL/JSL devices Signed-off-by: Curtis Malainey <[email protected]>

[ Upstream commit d3296fb ] We hit following warning when running tests on kernel compiled with CONFIG_DEBUG_ATOMIC_SLEEP=y: WARNING: CPU: 19 PID: 4472 at mm/gup.c:2381 __get_user_pages_fast+0x1a4/0x200 CPU: 19 PID: 4472 Comm: dummy Not tainted 5.6.0-rc6+ #3 RIP: 0010:__get_user_pages_fast+0x1a4/0x200 ... Call Trace: perf_prepare_sample+0xff1/0x1d90 perf_event_output_forward+0xe8/0x210 __perf_event_overflow+0x11a/0x310 __intel_pmu_pebs_event+0x657/0x850 intel_pmu_drain_pebs_nhm+0x7de/0x11d0 handle_pmi_common+0x1b2/0x650 intel_pmu_handle_irq+0x17b/0x370 perf_event_nmi_handler+0x40/0x60 nmi_handle+0x192/0x590 default_do_nmi+0x6d/0x150 do_nmi+0x2f9/0x3c0 nmi+0x8e/0xd7 While __get_user_pages_fast() is IRQ-safe, it calls access_ok(), which warns on: WARN_ON_ONCE(!in_task() && !pagefault_disabled()) Peter suggested disabling page faults around __get_user_pages_fast(), which gets rid of the warning in access_ok() call. Suggested-by: Peter Zijlstra <[email protected]> Signed-off-by: Jiri Olsa <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>

commit 10a98cb upstream. Leaving PF_MEMALLOC set when exiting a kthread causes it to remain set during do_exit(). That can confuse things. In particular, if BSD process accounting is enabled, then do_exit() writes data to an accounting file. If that file has FS_SYNC_FL set, then this write occurs synchronously and can misbehave if PF_MEMALLOC is set. For example, if the accounting file is located on an XFS filesystem, then a WARN_ON_ONCE() in iomap_do_writepage() is triggered and the data doesn't get written when it should. Or if the accounting file is located on an ext4 filesystem without a journal, then a WARN_ON_ONCE() in ext4_write_inode() is triggered and the inode doesn't get written. Fix this in xfsaild() by using the helper functions to save and restore PF_MEMALLOC. This can be reproduced as follows in the kvm-xfstests test appliance modified to add the 'acct' Debian package, and with kvm-xfstests's recommended kconfig modified to add CONFIG_BSD_PROCESS_ACCT=y: mkfs.xfs -f /dev/vdb mount /vdb touch /vdb/file chattr +S /vdb/file accton /vdb/file mkfs.xfs -f /dev/vdc mount /vdc umount /vdc It causes: WARNING: CPU: 1 PID: 336 at fs/iomap/buffered-io.c:1534 CPU: 1 PID: 336 Comm: xfsaild/vdc Not tainted 5.6.0-rc5 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20191223_100556-anatol 04/01/2014 RIP: 0010:iomap_do_writepage+0x16b/0x1f0 fs/iomap/buffered-io.c:1534 [...] Call Trace: write_cache_pages+0x189/0x4d0 mm/page-writeback.c:2238 iomap_writepages+0x1c/0x33 fs/iomap/buffered-io.c:1642 xfs_vm_writepages+0x65/0x90 fs/xfs/xfs_aops.c:578 do_writepages+0x41/0xe0 mm/page-writeback.c:2344 __filemap_fdatawrite_range+0xd2/0x120 mm/filemap.c:421 file_write_and_wait_range+0x71/0xc0 mm/filemap.c:760 xfs_file_fsync+0x7a/0x2b0 fs/xfs/xfs_file.c:114 generic_write_sync include/linux/fs.h:2867 [inline] xfs_file_buffered_aio_write+0x379/0x3b0 fs/xfs/xfs_file.c:691 call_write_iter include/linux/fs.h:1901 [inline] new_sync_write+0x130/0x1d0 fs/read_write.c:483 __kernel_write+0x54/0xe0 fs/read_write.c:515 do_acct_process+0x122/0x170 kernel/acct.c:522 slow_acct_process kernel/acct.c:581 [inline] acct_process+0x1d4/0x27c kernel/acct.c:607 do_exit+0x83d/0xbc0 kernel/exit.c:791 kthread+0xf1/0x140 kernel/kthread.c:257 ret_from_fork+0x27/0x50 arch/x86/entry/entry_64.S:352 This bug was originally reported by syzbot at https://lore.kernel.org/r/[email protected]. Reported-by: [email protected] Signed-off-by: Eric Biggers <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Signed-off-by: Darrick J. Wong <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

…f fs_info::journal_info commit fcc9973 upstream. [BUG] One run of btrfs/063 triggered the following lockdep warning: ============================================ WARNING: possible recursive locking detected 5.6.0-rc7-custom+ thesofproject#48 Not tainted -------------------------------------------- kworker/u24:0/7 is trying to acquire lock: ffff88817d3a46e0 (sb_internal#2){.+.+}, at: start_transaction+0x66c/0x890 [btrfs] but task is already holding lock: ffff88817d3a46e0 (sb_internal#2){.+.+}, at: start_transaction+0x66c/0x890 [btrfs] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(sb_internal#2); lock(sb_internal#2); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by kworker/u24:0/7: #0: ffff88817b495948 ((wq_completion)btrfs-endio-write){+.+.}, at: process_one_work+0x557/0xb80 #1: ffff888189ea7db8 ((work_completion)(&work->normal_work)){+.+.}, at: process_one_work+0x557/0xb80 #2: ffff88817d3a46e0 (sb_internal#2){.+.+}, at: start_transaction+0x66c/0x890 [btrfs] #3: ffff888174ca4da8 (&fs_info->reloc_mutex){+.+.}, at: btrfs_record_root_in_trans+0x83/0xd0 [btrfs] stack backtrace: CPU: 0 PID: 7 Comm: kworker/u24:0 Not tainted 5.6.0-rc7-custom+ thesofproject#48 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Workqueue: btrfs-endio-write btrfs_work_helper [btrfs] Call Trace: dump_stack+0xc2/0x11a __lock_acquire.cold+0xce/0x214 lock_acquire+0xe6/0x210 __sb_start_write+0x14e/0x290 start_transaction+0x66c/0x890 [btrfs] btrfs_join_transaction+0x1d/0x20 [btrfs] find_free_extent+0x1504/0x1a50 [btrfs] btrfs_reserve_extent+0xd5/0x1f0 [btrfs] btrfs_alloc_tree_block+0x1ac/0x570 [btrfs] btrfs_copy_root+0x213/0x580 [btrfs] create_reloc_root+0x3bd/0x470 [btrfs] btrfs_init_reloc_root+0x2d2/0x310 [btrfs] record_root_in_trans+0x191/0x1d0 [btrfs] btrfs_record_root_in_trans+0x90/0xd0 [btrfs] start_transaction+0x16e/0x890 [btrfs] btrfs_join_transaction+0x1d/0x20 [btrfs] btrfs_finish_ordered_io+0x55d/0xcd0 [btrfs] finish_ordered_fn+0x15/0x20 [btrfs] btrfs_work_helper+0x116/0x9a0 [btrfs] process_one_work+0x632/0xb80 worker_thread+0x80/0x690 kthread+0x1a3/0x1f0 ret_from_fork+0x27/0x50 It's pretty hard to reproduce, only one hit so far. [CAUSE] This is because we're calling btrfs_join_transaction() without re-using the current running one: btrfs_finish_ordered_io() |- btrfs_join_transaction() <<< Call #1 |- btrfs_record_root_in_trans() |- btrfs_reserve_extent() |- btrfs_join_transaction() <<< Call #2 Normally such btrfs_join_transaction() call should re-use the existing one, without trying to re-start a transaction. But the problem is, in btrfs_join_transaction() call #1, we call btrfs_record_root_in_trans() before initializing current::journal_info. And in btrfs_join_transaction() call #2, we're relying on current::journal_info to avoid such deadlock. [FIX] Call btrfs_record_root_in_trans() after we have initialized current::journal_info. CC: [email protected] # 4.4+ Signed-off-by: Qu Wenruo <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 5cbf326 upstream. Use follow_pfn() to get the PFN of a PFNMAP VMA instead of assuming that vma->vm_pgoff holds the base PFN of the VMA. This fixes a bug where attempting to do VFIO_IOMMU_MAP_DMA on an arbitrary PFNMAP'd region of memory calculates garbage for the PFN. Hilariously, this only got detected because the first "PFN" calculated by vaddr_get_pfn() is PFN 0 (vma->vm_pgoff==0), and iommu_iova_to_phys() uses PA==0 as an error, which triggers a WARN in vfio_unmap_unpin() because the translation "failed". PFN 0 is now unconditionally reserved on x86 in order to mitigate L1TF, which causes is_invalid_reserved_pfn() to return true and in turns results in vaddr_get_pfn() returning success for PFN 0. Eventually the bogus calculation runs into PFNs that aren't reserved and leads to failure in vfio_pin_map_dma(). The subsequent call to vfio_remove_dma() attempts to unmap PFN 0 and WARNs. WARNING: CPU: 8 PID: 5130 at drivers/vfio/vfio_iommu_type1.c:750 vfio_unmap_unpin+0x2e1/0x310 [vfio_iommu_type1] Modules linked in: vfio_pci vfio_virqfd vfio_iommu_type1 vfio ... CPU: 8 PID: 5130 Comm: sgx Tainted: G W 5.6.0-rc5-705d787c7fee-vfio+ #3 Hardware name: Intel Corporation Mehlow UP Server Platform/Moss Beach Server, BIOS CNLSE2R1.D00.X119.B49.1803010910 03/01/2018 RIP: 0010:vfio_unmap_unpin+0x2e1/0x310 [vfio_iommu_type1] Code: <0f> 0b 49 81 c5 00 10 00 00 e9 c5 fe ff ff bb 00 10 00 00 e9 3d fe RSP: 0018:ffffbeb5039ebda8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9a55cbf8d480 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff9a52b771c200 RBP: 0000000000000000 R08: 0000000000000040 R09: 00000000fffffff2 R10: 0000000000000001 R11: ffff9a51fa896000 R12: 0000000184010000 R13: 0000000184000000 R14: 0000000000010000 R15: ffff9a55cb66ea08 FS: 00007f15d3830b40(0000) GS:ffff9a55d5600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000561cf39429e0 CR3: 000000084f75f005 CR4: 00000000003626e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: vfio_remove_dma+0x17/0x70 [vfio_iommu_type1] vfio_iommu_type1_ioctl+0x9e3/0xa7b [vfio_iommu_type1] ksys_ioctl+0x92/0xb0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x4c/0x180 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f15d04c75d7 Code: <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 81 48 2d 00 f7 d8 64 89 01 48 Fixes: 73fa0d1 ("vfio: Type1 IOMMU implementation") Signed-off-by: Sean Christopherson <[email protected]> Signed-off-by: Alex Williamson <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

…onfig When the cml_rt1011_rt5682_dailink[].codecs pointer is overridden by a quirk with a devm allocated structure and the probe is deferred, in the next probe we will see an use-after-free condition (verified with KASAN). This can be avoided by using statically allocated configurations - which simplifies the code quite a bit as well. KASAN issue fixed. [ 23.301373] cml_rt1011_rt5682 cml_rt1011_rt5682: sof_rt1011_quirk = f [ 23.301875] ================================================================== [ 23.302018] BUG: KASAN: use-after-free in snd_cml_rt1011_probe+0x23a/0x3d0 [snd_soc_cml_rt1011_rt5682] [ 23.302178] Read of size 8 at addr ffff8881ec6acae0 by task kworker/0:2/105 [ 23.302320] CPU: 0 PID: 105 Comm: kworker/0:2 Not tainted 5.7.0-rc7-test+ #3 [ 23.302322] Hardware name: Google Helios/Helios, BIOS 01/21/2020 [ 23.302329] Workqueue: events deferred_probe_work_func [ 23.302331] Call Trace: [ 23.302339] dump_stack+0x76/0xa0 [ 23.302345] print_address_description.constprop.0.cold+0xd3/0x43e [ 23.302351] ? _raw_spin_lock_irqsave+0x7b/0xd0 [ 23.302355] ? _raw_spin_trylock_bh+0xf0/0xf0 [ 23.302362] ? snd_cml_rt1011_probe+0x23a/0x3d0 [snd_soc_cml_rt1011_rt5682] [ 23.302365] __kasan_report.cold+0x37/0x86 [ 23.302371] ? snd_cml_rt1011_probe+0x23a/0x3d0 [snd_soc_cml_rt1011_rt5682] [ 23.302375] kasan_report+0x38/0x50 [ 23.302382] snd_cml_rt1011_probe+0x23a/0x3d0 [snd_soc_cml_rt1011_rt5682] [ 23.302389] platform_drv_probe+0x66/0xc0 Fixes: 629ba12 ("ASoC: Intel: boards: split woofer and tweeter support") Suggested-by: Ranjani Sridharan <[email protected]> Signed-off-by: Fred Oh <[email protected]>

…onfig When the cml_rt1011_rt5682_dailink[].codecs pointer is overridden by a quirk with a devm allocated structure and the probe is deferred, in the next probe we will see an use-after-free condition (verified with KASAN). This can be avoided by using statically allocated configurations - which simplifies the code quite a bit as well. KASAN issue fixed. [ 23.301373] cml_rt1011_rt5682 cml_rt1011_rt5682: sof_rt1011_quirk = f [ 23.301875] ================================================================== [ 23.302018] BUG: KASAN: use-after-free in snd_cml_rt1011_probe+0x23a/0x3d0 [snd_soc_cml_rt1011_rt5682] [ 23.302178] Read of size 8 at addr ffff8881ec6acae0 by task kworker/0:2/105 [ 23.302320] CPU: 0 PID: 105 Comm: kworker/0:2 Not tainted 5.7.0-rc7-test+ #3 [ 23.302322] Hardware name: Google Helios/Helios, BIOS 01/21/2020 [ 23.302329] Workqueue: events deferred_probe_work_func [ 23.302331] Call Trace: [ 23.302339] dump_stack+0x76/0xa0 [ 23.302345] print_address_description.constprop.0.cold+0xd3/0x43e [ 23.302351] ? _raw_spin_lock_irqsave+0x7b/0xd0 [ 23.302355] ? _raw_spin_trylock_bh+0xf0/0xf0 [ 23.302362] ? snd_cml_rt1011_probe+0x23a/0x3d0 [snd_soc_cml_rt1011_rt5682] [ 23.302365] __kasan_report.cold+0x37/0x86 [ 23.302371] ? snd_cml_rt1011_probe+0x23a/0x3d0 [snd_soc_cml_rt1011_rt5682] [ 23.302375] kasan_report+0x38/0x50 [ 23.302382] snd_cml_rt1011_probe+0x23a/0x3d0 [snd_soc_cml_rt1011_rt5682] [ 23.302389] platform_drv_probe+0x66/0xc0 Fixes: 629ba12 ("ASoC: Intel: boards: split woofer and tweeter support") Suggested-by: Ranjani Sridharan <[email protected]> Signed-off-by: Fred Oh <[email protected]> Signed-off-by: Pierre-Louis Bossart <[email protected]> Reviewed-by: Ranjani Sridharan <[email protected]> Reviewed-by: Bard Liao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>

commit 0bd0db4 upstream. The `INSN_CONFIG` comedi instruction with sub-instruction code `INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is used as a right shift amount for other bitmask values without being checked. Shift amounts greater than or equal to 32 will result in undefined behavior. Add code to deal with this. Fixes: 33cdce6 ("staging: comedi: addi_apci_1032: conform to new INSN_CONFIG_DIGITAL_TRIG") Cc: <[email protected]> #3.8+ Signed-off-by: Ian Abbott <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 926234f upstream. The `INSN_CONFIG` comedi instruction with sub-instruction code `INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is used as a right shift amount for other bitmask values without being checked. Shift amounts greater than or equal to 32 will result in undefined behavior. Add code to deal with this. Fixes: 1e15687 ("staging: comedi: addi_apci_1564: add Change-of-State interrupt subdevice and required functions") Cc: <[email protected]> #3.17+ Signed-off-by: Ian Abbott <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit be6577a upstream. Stalls are quite frequent with recent kernels. I enabled CONFIG_SOFTLOCKUP_DETECTOR and I caught the following stall: watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [cc1:22803] CPU: 0 PID: 22803 Comm: cc1 Not tainted 5.6.17+ #3 Hardware name: 9000/800/rp3440 IAOQ[0]: d_alloc_parallel+0x384/0x688 IAOQ[1]: d_alloc_parallel+0x388/0x688 RP(r2): d_alloc_parallel+0x134/0x688 Backtrace: [<000000004036974c>] __lookup_slow+0xa4/0x200 [<0000000040369fc8>] walk_component+0x288/0x458 [<000000004036a9a0>] path_lookupat+0x88/0x198 [<000000004036e748>] filename_lookup+0xa0/0x168 [<000000004036e95c>] user_path_at_empty+0x64/0x80 [<000000004035d93c>] vfs_statx+0x104/0x158 [<000000004035dfcc>] __do_sys_lstat64+0x44/0x80 [<000000004035e5a0>] sys_lstat64+0x20/0x38 [<0000000040180054>] syscall_exit+0x0/0x14 The code was stuck in this loop in d_alloc_parallel: 4037d414: 0e 00 10 dc ldd 0(r16),ret0 4037d418: c7 fc 5f ed bb,< ret0,1f,4037d414 <d_alloc_parallel+0x384> 4037d41c: 08 00 02 40 nop This is the inner loop of bit_spin_lock which is called by hlist_bl_unlock in d_alloc_parallel: static inline void bit_spin_lock(int bitnum, unsigned long *addr) { /* * Assuming the lock is uncontended, this never enters * the body of the outer loop. If it is contended, then * within the inner loop a non-atomic test is used to * busywait with less bus contention for a good time to * attempt to acquire the lock bit. */ preempt_disable(); #if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK) while (unlikely(test_and_set_bit_lock(bitnum, addr))) { preempt_enable(); do { cpu_relax(); } while (test_bit(bitnum, addr)); preempt_disable(); } #endif __acquire(bitlock); } After consideration, I realized that we must be losing bit unlocks. Then, I noticed that we missed defining atomic64_set_release(). Adding this define fixes the stalls in bit operations. Signed-off-by: Dave Anglin <[email protected]> Cc: [email protected] Signed-off-by: Helge Deller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit e24c644 ] I compiled with AddressSanitizer and I had these memory leaks while I was using the tep_parse_format function: Direct leak of 28 byte(s) in 4 object(s) allocated from: #0 0x7fb07db49ffe in __interceptor_realloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10dffe) #1 0x7fb07a724228 in extend_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:985 #2 0x7fb07a724c21 in __read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1140 #3 0x7fb07a724f78 in read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1206 thesofproject#4 0x7fb07a725191 in __read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1291 thesofproject#5 0x7fb07a7251df in read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1299 thesofproject#6 0x7fb07a72e6c8 in process_dynamic_array_len /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:2849 thesofproject#7 0x7fb07a7304b8 in process_function /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3161 thesofproject#8 0x7fb07a730900 in process_arg_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3207 thesofproject#9 0x7fb07a727c0b in process_arg /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1786 thesofproject#10 0x7fb07a731080 in event_read_print_args /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3285 thesofproject#11 0x7fb07a731722 in event_read_print /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3369 thesofproject#12 0x7fb07a740054 in __tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6335 thesofproject#13 0x7fb07a74047a in __parse_event /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6389 thesofproject#14 0x7fb07a740536 in tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6431 thesofproject#15 0x7fb07a785acf in parse_event ../../../src/fs-src/fs.c:251 thesofproject#16 0x7fb07a785ccd in parse_systems ../../../src/fs-src/fs.c:284 thesofproject#17 0x7fb07a786fb3 in read_metadata ../../../src/fs-src/fs.c:593 thesofproject#18 0x7fb07a78760e in ftrace_fs_source_init ../../../src/fs-src/fs.c:727 thesofproject#19 0x7fb07d90c19c in add_component_with_init_method_data ../../../../src/lib/graph/graph.c:1048 thesofproject#20 0x7fb07d90c87b in add_source_component_with_initialize_method_data ../../../../src/lib/graph/graph.c:1127 thesofproject#21 0x7fb07d90c92a in bt_graph_add_source_component ../../../../src/lib/graph/graph.c:1152 thesofproject#22 0x55db11aa632e in cmd_run_ctx_create_components_from_config_components ../../../src/cli/babeltrace2.c:2252 thesofproject#23 0x55db11aa6fda in cmd_run_ctx_create_components ../../../src/cli/babeltrace2.c:2347 thesofproject#24 0x55db11aa780c in cmd_run ../../../src/cli/babeltrace2.c:2461 thesofproject#25 0x55db11aa8a7d in main ../../../src/cli/babeltrace2.c:2673 thesofproject#26 0x7fb07d5460b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x270b2) The token variable in the process_dynamic_array_len function is allocated in the read_expect_type function, but is not freed before calling the read_token function. Free the token variable before calling read_token in order to plug the leak. Signed-off-by: Philippe Duplessis-Guindon <[email protected]> Reviewed-by: Steven Rostedt (VMware) <[email protected]> Link: https://lore.kernel.org/linux-trace-devel/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit d26383d ] The following leaks were detected by ASAN: Indirect leak of 360 byte(s) in 9 object(s) allocated from: #0 0x7fecc305180e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e) #1 0x560578f6dce5 in perf_pmu__new_format util/pmu.c:1333 #2 0x560578f752fc in perf_pmu_parse util/pmu.y:59 #3 0x560578f6a8b7 in perf_pmu__format_parse util/pmu.c:73 thesofproject#4 0x560578e07045 in test__pmu tests/pmu.c:155 thesofproject#5 0x560578de109b in run_test tests/builtin-test.c:410 thesofproject#6 0x560578de109b in test_and_print tests/builtin-test.c:440 thesofproject#7 0x560578de401a in __cmd_test tests/builtin-test.c:661 thesofproject#8 0x560578de401a in cmd_test tests/builtin-test.c:807 thesofproject#9 0x560578e49354 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 thesofproject#10 0x560578ce71a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 thesofproject#11 0x560578ce71a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 thesofproject#12 0x560578ce71a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 thesofproject#13 0x7fecc2b7acc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: cff7f95 ("perf tests: Move pmu tests into separate object") Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit b872d06 ] The vfio_pci_release call will free and clear the error and request eventfd ctx while these ctx could be in use at the same time in the function like vfio_pci_request, and it's expected to protect them under the vdev->igate mutex, which is missing in vfio_pci_release. This issue is introduced since commit 1518ac2 ("vfio/pci: fix memory leaks of eventfd ctx"),and since commit 5c5866c ("vfio/pci: Clear error and request eventfd ctx after releasing"), it's very easily to trigger the kernel panic like this: [ 9513.904346] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 [ 9513.913091] Mem abort info: [ 9513.915871] ESR = 0x96000006 [ 9513.918912] EC = 0x25: DABT (current EL), IL = 32 bits [ 9513.924198] SET = 0, FnV = 0 [ 9513.927238] EA = 0, S1PTW = 0 [ 9513.930364] Data abort info: [ 9513.933231] ISV = 0, ISS = 0x00000006 [ 9513.937048] CM = 0, WnR = 0 [ 9513.940003] user pgtable: 4k pages, 48-bit VAs, pgdp=0000007ec7d12000 [ 9513.946414] [0000000000000008] pgd=0000007ec7d13003, p4d=0000007ec7d13003, pud=0000007ec728c003, pmd=0000000000000000 [ 9513.956975] Internal error: Oops: 96000006 [#1] PREEMPT SMP [ 9513.962521] Modules linked in: vfio_pci vfio_virqfd vfio_iommu_type1 vfio hclge hns3 hnae3 [last unloaded: vfio_pci] [ 9513.972998] CPU: 4 PID: 1327 Comm: bash Tainted: G W 5.8.0-rc4+ #3 [ 9513.980443] Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 CS V3.B270.01 05/08/2020 [ 9513.989274] pstate: 80400089 (Nzcv daIf +PAN -UAO BTYPE=--) [ 9513.994827] pc : _raw_spin_lock_irqsave+0x48/0x88 [ 9513.999515] lr : eventfd_signal+0x6c/0x1b0 [ 9514.003591] sp : ffff800038a0b960 [ 9514.006889] x29: ffff800038a0b960 x28: ffff007ef7f4da10 [ 9514.012175] x27: ffff207eefbbfc80 x26: ffffbb7903457000 [ 9514.017462] x25: ffffbb7912191000 x24: ffff007ef7f4d400 [ 9514.022747] x23: ffff20be6e0e4c00 x22: 0000000000000008 [ 9514.028033] x21: 0000000000000000 x20: 0000000000000000 [ 9514.033321] x19: 0000000000000008 x18: 0000000000000000 [ 9514.038606] x17: 0000000000000000 x16: ffffbb7910029328 [ 9514.043893] x15: 0000000000000000 x14: 0000000000000001 [ 9514.049179] x13: 0000000000000000 x12: 0000000000000002 [ 9514.054466] x11: 0000000000000000 x10: 0000000000000a00 [ 9514.059752] x9 : ffff800038a0b840 x8 : ffff007ef7f4de60 [ 9514.065038] x7 : ffff007fffc96690 x6 : fffffe01faffb748 [ 9514.070324] x5 : 0000000000000000 x4 : 0000000000000000 [ 9514.075609] x3 : 0000000000000000 x2 : 0000000000000001 [ 9514.080895] x1 : ffff007ef7f4d400 x0 : 0000000000000000 [ 9514.086181] Call trace: [ 9514.088618] _raw_spin_lock_irqsave+0x48/0x88 [ 9514.092954] eventfd_signal+0x6c/0x1b0 [ 9514.096691] vfio_pci_request+0x84/0xd0 [vfio_pci] [ 9514.101464] vfio_del_group_dev+0x150/0x290 [vfio] [ 9514.106234] vfio_pci_remove+0x30/0x128 [vfio_pci] [ 9514.111007] pci_device_remove+0x48/0x108 [ 9514.115001] device_release_driver_internal+0x100/0x1b8 [ 9514.120200] device_release_driver+0x28/0x38 [ 9514.124452] pci_stop_bus_device+0x68/0xa8 [ 9514.128528] pci_stop_and_remove_bus_device+0x20/0x38 [ 9514.133557] pci_iov_remove_virtfn+0xb4/0x128 [ 9514.137893] sriov_disable+0x3c/0x108 [ 9514.141538] pci_disable_sriov+0x28/0x38 [ 9514.145445] hns3_pci_sriov_configure+0x48/0xb8 [hns3] [ 9514.150558] sriov_numvfs_store+0x110/0x198 [ 9514.154724] dev_attr_store+0x44/0x60 [ 9514.158373] sysfs_kf_write+0x5c/0x78 [ 9514.162018] kernfs_fop_write+0x104/0x210 [ 9514.166010] __vfs_write+0x48/0x90 [ 9514.169395] vfs_write+0xbc/0x1c0 [ 9514.172694] ksys_write+0x74/0x100 [ 9514.176079] __arm64_sys_write+0x24/0x30 [ 9514.179987] el0_svc_common.constprop.4+0x110/0x200 [ 9514.184842] do_el0_svc+0x34/0x98 [ 9514.188144] el0_svc+0x14/0x40 [ 9514.191185] el0_sync_handler+0xb0/0x2d0 [ 9514.195088] el0_sync+0x140/0x180 [ 9514.198389] Code: b9001020 d2800000 52800022 f9800271 (885ffe61) [ 9514.204455] ---[ end trace 648de00c8406465f ]--- [ 9514.212308] note: bash[1327] exited with preempt_count 1 Cc: Qian Cai <[email protected]> Cc: Alex Williamson <[email protected]> Fixes: 1518ac2 ("vfio/pci: fix memory leaks of eventfd ctx") Signed-off-by: Zeng Tao <[email protected]> Signed-off-by: Alex Williamson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

@offset

commit 64b7f67 upstream. On setxattr() syscall path due to an apprent typo the size of a dynamically allocated memory chunk for storing struct smb2_file_full_ea_info object is computed incorrectly, to be more precise the first addend is the size of a pointer instead of the wanted object size. Coincidentally it makes no difference on 64-bit platforms, however on 32-bit targets the following memcpy() writes 4 bytes of data outside of the dynamically allocated memory. ============================================================================= BUG kmalloc-16 (Not tainted): Redzone overwritten ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: 0x79e69a6f-0x9e5cdecf @offset=368. First byte 0x73 instead of 0xcc INFO: Slab 0xd36d2454 objects=85 used=51 fp=0xf7d0fc7a flags=0x35000201 INFO: Object 0x6f171df3 @offset=352 fp=0x00000000 Redzone 5d4ff02d: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ Object 6f171df3: 00 00 00 00 00 05 06 00 73 6e 72 75 62 00 66 69 ........snrub.fi Redzone 79e69a6f: 73 68 32 0a sh2. Padding 56254d82: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ CPU: 0 PID: 8196 Comm: attr Tainted: G B 5.9.0-rc8+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014 Call Trace: dump_stack+0x54/0x6e print_trailer+0x12c/0x134 check_bytes_and_report.cold+0x3e/0x69 check_object+0x18c/0x250 free_debug_processing+0xfe/0x230 __slab_free+0x1c0/0x300 kfree+0x1d3/0x220 smb2_set_ea+0x27d/0x540 cifs_xattr_set+0x57f/0x620 __vfs_setxattr+0x4e/0x60 __vfs_setxattr_noperm+0x4e/0x100 __vfs_setxattr_locked+0xae/0xd0 vfs_setxattr+0x4e/0xe0 setxattr+0x12c/0x1a0 path_setxattr+0xa4/0xc0 __ia32_sys_lsetxattr+0x1d/0x20 __do_fast_syscall_32+0x40/0x70 do_fast_syscall_32+0x29/0x60 do_SYSENTER_32+0x15/0x20 entry_SYSENTER_32+0x9f/0xf2 Fixes: 5517554 ("cifs: Add support for writing attributes on SMB2+") Signed-off-by: Vladimir Zapolskiy <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 71a174b ] b6da31b "tty: Fix data race in tty_insert_flip_string_fixed_flag" puts tty_flip_buffer_push under port->lock introducing the following possible circular locking dependency: [30129.876566] ====================================================== [30129.876566] WARNING: possible circular locking dependency detected [30129.876567] 5.9.0-rc2+ #3 Tainted: G S W [30129.876568] ------------------------------------------------------ [30129.876568] sysrq.sh/1222 is trying to acquire lock: [30129.876569] ffffffff92c39480 (console_owner){....}-{0:0}, at: console_unlock+0x3fe/0xa90 [30129.876572] but task is already holding lock: [30129.876572] ffff888107cb9018 (&pool->lock/1){-.-.}-{2:2}, at: show_workqueue_state.cold.55+0x15b/0x6ca [30129.876576] which lock already depends on the new lock. [30129.876577] the existing dependency chain (in reverse order) is: [30129.876578] -> #3 (&pool->lock/1){-.-.}-{2:2}: [30129.876581] _raw_spin_lock+0x30/0x70 [30129.876581] __queue_work+0x1a3/0x10f0 [30129.876582] queue_work_on+0x78/0x80 [30129.876582] pty_write+0x165/0x1e0 [30129.876583] n_tty_write+0x47f/0xf00 [30129.876583] tty_write+0x3d6/0x8d0 [30129.876584] vfs_write+0x1a8/0x650 [30129.876588] -> #2 (&port->lock#2){-.-.}-{2:2}: [30129.876590] _raw_spin_lock_irqsave+0x3b/0x80 [30129.876591] tty_port_tty_get+0x1d/0xb0 [30129.876592] tty_port_default_wakeup+0xb/0x30 [30129.876592] serial8250_tx_chars+0x3d6/0x970 [30129.876593] serial8250_handle_irq.part.12+0x216/0x380 [30129.876593] serial8250_default_handle_irq+0x82/0xe0 [30129.876594] serial8250_interrupt+0xdd/0x1b0 [30129.876595] __handle_irq_event_percpu+0xfc/0x850 [30129.876602] -> #1 (&port->lock){-.-.}-{2:2}: [30129.876605] _raw_spin_lock_irqsave+0x3b/0x80 [30129.876605] serial8250_console_write+0x12d/0x900 [30129.876606] console_unlock+0x679/0xa90 [30129.876606] register_console+0x371/0x6e0 [30129.876607] univ8250_console_init+0x24/0x27 [30129.876607] console_init+0x2f9/0x45e [30129.876609] -> #0 (console_owner){....}-{0:0}: [30129.876611] __lock_acquire+0x2f70/0x4e90 [30129.876612] lock_acquire+0x1ac/0xad0 [30129.876612] console_unlock+0x460/0xa90 [30129.876613] vprintk_emit+0x130/0x420 [30129.876613] printk+0x9f/0xc5 [30129.876614] show_pwq+0x154/0x618 [30129.876615] show_workqueue_state.cold.55+0x193/0x6ca [30129.876615] __handle_sysrq+0x244/0x460 [30129.876616] write_sysrq_trigger+0x48/0x4a [30129.876616] proc_reg_write+0x1a6/0x240 [30129.876617] vfs_write+0x1a8/0x650 [30129.876619] other info that might help us debug this: [30129.876620] Chain exists of: [30129.876621] console_owner --> &port->lock#2 --> &pool->lock/1 [30129.876625] Possible unsafe locking scenario: [30129.876626] CPU0 CPU1 [30129.876626] ---- ---- [30129.876627] lock(&pool->lock/1); [30129.876628] lock(&port->lock#2); [30129.876630] lock(&pool->lock/1); [30129.876631] lock(console_owner); [30129.876633] *** DEADLOCK *** [30129.876634] 5 locks held by sysrq.sh/1222: [30129.876634] #0: ffff8881d3ce0470 (sb_writers#3){.+.+}-{0:0}, at: vfs_write+0x359/0x650 [30129.876637] #1: ffffffff92c612c0 (rcu_read_lock){....}-{1:2}, at: __handle_sysrq+0x4d/0x460 [30129.876640] #2: ffffffff92c612c0 (rcu_read_lock){....}-{1:2}, at: show_workqueue_state+0x5/0xf0 [30129.876642] #3: ffff888107cb9018 (&pool->lock/1){-.-.}-{2:2}, at: show_workqueue_state.cold.55+0x15b/0x6ca [30129.876645] thesofproject#4: ffffffff92c39980 (console_lock){+.+.}-{0:0}, at: vprintk_emit+0x123/0x420 [30129.876648] stack backtrace: [30129.876649] CPU: 3 PID: 1222 Comm: sysrq.sh Tainted: G S W 5.9.0-rc2+ #3 [30129.876649] Hardware name: Intel Corporation 2012 Client Platform/Emerald Lake 2, BIOS ACRVMBY1.86C.0078.P00.1201161002 01/16/2012 [30129.876650] Call Trace: [30129.876650] dump_stack+0x9d/0xe0 [30129.876651] check_noncircular+0x34f/0x410 [30129.876653] __lock_acquire+0x2f70/0x4e90 [30129.876656] lock_acquire+0x1ac/0xad0 [30129.876658] console_unlock+0x460/0xa90 [30129.876660] vprintk_emit+0x130/0x420 [30129.876660] printk+0x9f/0xc5 [30129.876661] show_pwq+0x154/0x618 [30129.876662] show_workqueue_state.cold.55+0x193/0x6ca [30129.876664] __handle_sysrq+0x244/0x460 [30129.876665] write_sysrq_trigger+0x48/0x4a [30129.876665] proc_reg_write+0x1a6/0x240 [30129.876666] vfs_write+0x1a8/0x650 It looks like the commit was aimed to protect tty_insert_flip_string and there is no need for tty_flip_buffer_push to be under this lock. Fixes: b6da31b ("tty: Fix data race in tty_insert_flip_string_fixed_flag") Signed-off-by: Artem Savkov <[email protected]> Acked-by: Jiri Slaby <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

With lockdeps enabled, we get the following warning: ====================================================== WARNING: possible circular locking dependency detected ------------------------------------------------------ kworker/u12:1/53 is trying to acquire lock: ffff80000adce220 (coresight_mutex){+.+.}-{4:4}, at: coresight_set_assoc_ectdev_mutex+0x3c/0x5c but task is already holding lock: ffff80000add1f60 (ect_mutex){+.+.}-{4:4}, at: cti_probe+0x318/0x394 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (ect_mutex){+.+.}-{4:4}: __mutex_lock_common+0xd8/0xe60 mutex_lock_nested+0x44/0x50 cti_add_assoc_to_csdev+0x4c/0x184 coresight_register+0x2f0/0x314 tmc_probe+0x33c/0x414 -> #0 (coresight_mutex){+.+.}-{4:4}: __lock_acquire+0x1a20/0x32d0 lock_acquire+0x160/0x308 __mutex_lock_common+0xd8/0xe60 mutex_lock_nested+0x44/0x50 coresight_set_assoc_ectdev_mutex+0x3c/0x5c cti_update_conn_xrefs+0x6c/0xf8 cti_probe+0x33c/0x394 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(ect_mutex); lock(coresight_mutex); lock(ect_mutex); lock(coresight_mutex); *** DEADLOCK *** 4 locks held by kworker/u12:1/53: #0: ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x1fc/0x63c #1: (deferred_probe_work){+.+.}-{0:0}, at: process_one_work+0x228/0x63c #2: (&dev->mutex){....}-{4:4}, at: __device_attach+0x48/0x1a8 #3: (ect_mutex){+.+.}-{4:4}, at: cti_probe+0x318/0x394 To fix the same, call cti_add_assoc_to_csdev without the holding coresight_mutex and confine the locking while setting the associated ect / cti device using coresight_set_assoc_ectdev_mutex(). Fixes: 177af82 ("coresight: cti: Enable CTI associated with devices") Cc: Mathieu Poirier <[email protected]> Cc: Suzuki K Poulose <[email protected]> Cc: Mike Leach <[email protected]> Cc: Leo Yan <[email protected]> Signed-off-by: Sudeep Holla <[email protected]> Reviewed-by: Mike Leach <[email protected]> Signed-off-by: Suzuki K Poulose <[email protected]> Link: https://lore.kernel.org/r/[email protected]

Sabrina Dubroca says: ==================== macsec: offload-related fixes I'm working on a dummy offload for macsec on netdevsim. It just has a small SecY and RXSC table so I can trigger failures easily on the ndo_* side. It has exposed a couple of issues. The first patch is a revert of commit c850240 ("net: macsec: report real_dev features when HW offloading is enabled"). That commit tried to improve the performance of macsec offload by taking advantage of some of the NIC's features, but in doing so, broke macsec offload when the lower device supports both macsec and ipsec offload, as the ipsec offload feature flags were copied from the real device. Since the macsec device doesn't provide xdo_* ops, the XFRM core rejects the registration of the new macsec device in xfrm_api_check. I'm working on re-adding those feature flags when offload is available, but I haven't fully solved that yet. I think it would be safer to do that second part in net-next considering how complex feature interactions tend to be. v2: - better describe the issue introduced by commit c850240 (Leon Romanovsky) - patch #3: drop unnecessary !! (Leon Romanovsky) v3: - patch #3: drop extra newline (Jakub Kicinski) ==================== Signed-off-by: David S. Miller <[email protected]>

Yang Yingliang says: ==================== stmmac: dwmac-loongson: fixes three leaks patch #2 fixes missing pci_disable_device() in the error path in probe() patch #1 and pach #3 fix missing pci_disable_msi() and of_node_put() in error and remove() path. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>

Histogram values can not be strings, stacktraces, graphs, symbols, syscalls, or grouped in buckets or log. Give an error if a value is set to do so. Note, the histogram code was not prepared to handle these modifiers for histograms and caused a bug. Mark Rutland reported: # echo 'p:copy_to_user __arch_copy_to_user n=$arg2' >> /sys/kernel/tracing/kprobe_events # echo 'hist:keys=n:vals=hitcount.buckets=8:sort=hitcount' > /sys/kernel/tracing/events/kprobes/copy_to_user/trigger # cat /sys/kernel/tracing/events/kprobes/copy_to_user/hist [ 143.694628] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 143.695190] Mem abort info: [ 143.695362] ESR = 0x0000000096000004 [ 143.695604] EC = 0x25: DABT (current EL), IL = 32 bits [ 143.695889] SET = 0, FnV = 0 [ 143.696077] EA = 0, S1PTW = 0 [ 143.696302] FSC = 0x04: level 0 translation fault [ 143.702381] Data abort info: [ 143.702614] ISV = 0, ISS = 0x00000004 [ 143.702832] CM = 0, WnR = 0 [ 143.703087] user pgtable: 4k pages, 48-bit VAs, pgdp=00000000448f9000 [ 143.703407] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 [ 143.704137] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 143.704714] Modules linked in: [ 143.705273] CPU: 0 PID: 133 Comm: cat Not tainted 6.2.0-00003-g6fc512c10a7c #3 [ 143.706138] Hardware name: linux,dummy-virt (DT) [ 143.706723] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 143.707120] pc : hist_field_name.part.0+0x14/0x140 [ 143.707504] lr : hist_field_name.part.0+0x104/0x140 [ 143.707774] sp : ffff800008333a30 [ 143.707952] x29: ffff800008333a30 x28: 0000000000000001 x27: 0000000000400cc0 [ 143.708429] x26: ffffd7a653b20260 x25: 0000000000000000 x24: ffff10d303ee5800 [ 143.708776] x23: ffffd7a6539b27b0 x22: ffff10d303fb8c00 x21: 0000000000000001 [ 143.709127] x20: ffff10d303ec2000 x19: 0000000000000000 x18: 0000000000000000 [ 143.709478] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 143.709824] x14: 0000000000000000 x13: 203a6f666e692072 x12: 6567676972742023 [ 143.710179] x11: 0a230a6d6172676f x10: 000000000000002c x9 : ffffd7a6521e018c [ 143.710584] x8 : 000000000000002c x7 : 7f7f7f7f7f7f7f7f x6 : 000000000000002c [ 143.710915] x5 : ffff10d303b0103e x4 : ffffd7a653b20261 x3 : 000000000000003d [ 143.711239] x2 : 0000000000020001 x1 : 0000000000000001 x0 : 0000000000000000 [ 143.711746] Call trace: [ 143.712115] hist_field_name.part.0+0x14/0x140 [ 143.712642] hist_field_name.part.0+0x104/0x140 [ 143.712925] hist_field_print+0x28/0x140 [ 143.713125] event_hist_trigger_print+0x174/0x4d0 [ 143.713348] hist_show+0xf8/0x980 [ 143.713521] seq_read_iter+0x1bc/0x4b0 [ 143.713711] seq_read+0x8c/0xc4 [ 143.713876] vfs_read+0xc8/0x2a4 [ 143.714043] ksys_read+0x70/0xfc [ 143.714218] __arm64_sys_read+0x24/0x30 [ 143.714400] invoke_syscall+0x50/0x120 [ 143.714587] el0_svc_common.constprop.0+0x4c/0x100 [ 143.714807] do_el0_svc+0x44/0xd0 [ 143.714970] el0_svc+0x2c/0x84 [ 143.715134] el0t_64_sync_handler+0xbc/0x140 [ 143.715334] el0t_64_sync+0x190/0x194 [ 143.715742] Code: a9bd7bfd 910003fd a90153f3 aa0003f3 (f9400000) [ 143.716510] ---[ end trace 0000000000000000 ]--- Segmentation fault Link: https://lkml.kernel.org/r/[email protected] Cc: [email protected] Cc: Masami Hiramatsu <[email protected]> Cc: Andrew Morton <[email protected]> Fixes: c6afad4 ("tracing: Add hist trigger 'sym' and 'sym-offset' modifiers") Reported-by: Mark Rutland <[email protected]> Tested-by: Mark Rutland <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]>

The following LOCKDEP was detected: Workqueue: events smc_lgr_free_work [smc] WARNING: possible circular locking dependency detected 6.1.0-20221027.rc2.git8.56bc5b569087.300.fc36.s390x+debug #1 Not tainted ------------------------------------------------------ kworker/3:0/176251 is trying to acquire lock: 00000000f1467148 ((wq_completion)smc_tx_wq-00000000#2){+.+.}-{0:0}, at: __flush_workqueue+0x7a/0x4f0 but task is already holding lock: 0000037fffe97dc8 ((work_completion)(&(&lgr->free_work)->work)){+.+.}-{0:0}, at: process_one_work+0x232/0x730 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> thesofproject#4 ((work_completion)(&(&lgr->free_work)->work)){+.+.}-{0:0}: __lock_acquire+0x58e/0xbd8 lock_acquire.part.0+0xe2/0x248 lock_acquire+0xac/0x1c8 __flush_work+0x76/0xf0 __cancel_work_timer+0x170/0x220 __smc_lgr_terminate.part.0+0x34/0x1c0 [smc] smc_connect_rdma+0x15e/0x418 [smc] __smc_connect+0x234/0x480 [smc] smc_connect+0x1d6/0x230 [smc] __sys_connect+0x90/0xc0 __do_sys_socketcall+0x186/0x370 __do_syscall+0x1da/0x208 system_call+0x82/0xb0 -> #3 (smc_client_lgr_pending){+.+.}-{3:3}: __lock_acquire+0x58e/0xbd8 lock_acquire.part.0+0xe2/0x248 lock_acquire+0xac/0x1c8 __mutex_lock+0x96/0x8e8 mutex_lock_nested+0x32/0x40 smc_connect_rdma+0xa4/0x418 [smc] __smc_connect+0x234/0x480 [smc] smc_connect+0x1d6/0x230 [smc] __sys_connect+0x90/0xc0 __do_sys_socketcall+0x186/0x370 __do_syscall+0x1da/0x208 system_call+0x82/0xb0 -> #2 (sk_lock-AF_SMC){+.+.}-{0:0}: __lock_acquire+0x58e/0xbd8 lock_acquire.part.0+0xe2/0x248 lock_acquire+0xac/0x1c8 lock_sock_nested+0x46/0xa8 smc_tx_work+0x34/0x50 [smc] process_one_work+0x30c/0x730 worker_thread+0x62/0x420 kthread+0x138/0x150 __ret_from_fork+0x3c/0x58 ret_from_fork+0xa/0x40 -> #1 ((work_completion)(&(&smc->conn.tx_work)->work)){+.+.}-{0:0}: __lock_acquire+0x58e/0xbd8 lock_acquire.part.0+0xe2/0x248 lock_acquire+0xac/0x1c8 process_one_work+0x2bc/0x730 worker_thread+0x62/0x420 kthread+0x138/0x150 __ret_from_fork+0x3c/0x58 ret_from_fork+0xa/0x40 -> #0 ((wq_completion)smc_tx_wq-00000000#2){+.+.}-{0:0}: check_prev_add+0xd8/0xe88 validate_chain+0x70c/0xb20 __lock_acquire+0x58e/0xbd8 lock_acquire.part.0+0xe2/0x248 lock_acquire+0xac/0x1c8 __flush_workqueue+0xaa/0x4f0 drain_workqueue+0xaa/0x158 destroy_workqueue+0x44/0x2d8 smc_lgr_free+0x9e/0xf8 [smc] process_one_work+0x30c/0x730 worker_thread+0x62/0x420 kthread+0x138/0x150 __ret_from_fork+0x3c/0x58 ret_from_fork+0xa/0x40 other info that might help us debug this: Chain exists of: (wq_completion)smc_tx_wq-00000000#2 --> smc_client_lgr_pending --> (work_completion)(&(&lgr->free_work)->work) Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock((work_completion)(&(&lgr->free_work)->work)); lock(smc_client_lgr_pending); lock((work_completion) (&(&lgr->free_work)->work)); lock((wq_completion)smc_tx_wq-00000000#2); *** DEADLOCK *** 2 locks held by kworker/3:0/176251: #0: 0000000080183548 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x232/0x730 #1: 0000037fffe97dc8 ((work_completion) (&(&lgr->free_work)->work)){+.+.}-{0:0}, at: process_one_work+0x232/0x730 stack backtrace: CPU: 3 PID: 176251 Comm: kworker/3:0 Not tainted Hardware name: IBM 8561 T01 701 (z/VM 7.2.0) Call Trace: [<000000002983c3e4>] dump_stack_lvl+0xac/0x100 [<0000000028b477ae>] check_noncircular+0x13e/0x160 [<0000000028b48808>] check_prev_add+0xd8/0xe88 [<0000000028b49cc4>] validate_chain+0x70c/0xb20 [<0000000028b4bd26>] __lock_acquire+0x58e/0xbd8 [<0000000028b4cf6a>] lock_acquire.part.0+0xe2/0x248 [<0000000028b4d17c>] lock_acquire+0xac/0x1c8 [<0000000028addaaa>] __flush_workqueue+0xaa/0x4f0 [<0000000028addf9a>] drain_workqueue+0xaa/0x158 [<0000000028ae303c>] destroy_workqueue+0x44/0x2d8 [<000003ff8029af26>] smc_lgr_free+0x9e/0xf8 [smc] [<0000000028adf3d4>] process_one_work+0x30c/0x730 [<0000000028adf85a>] worker_thread+0x62/0x420 [<0000000028aeac50>] kthread+0x138/0x150 [<0000000028a63914>] __ret_from_fork+0x3c/0x58 [<00000000298503da>] ret_from_fork+0xa/0x40 INFO: lockdep is turned off. =================================================================== This deadlock occurs because cancel_delayed_work_sync() waits for the work(&lgr->free_work) to finish, while the &lgr->free_work waits for the work(lgr->tx_wq), which needs the sk_lock-AF_SMC, that is already used under the mutex_lock. The solution is to use cancel_delayed_work() instead, which kills off a pending work. Fixes: a52bcc9 ("net/smc: improve termination processing") Signed-off-by: Wenjia Zhang <[email protected]> Reviewed-by: Jan Karcher <[email protected]> Reviewed-by: Karsten Graul <[email protected]> Reviewed-by: Tony Lu <[email protected]> Signed-off-by: David S. Miller <[email protected]>

morimoto and others added 18 commits August 23, 2019 11:35

ASoC: mediatek: mt8183: fix tdm out data is valid on rising edge

2c650fd

This patch correct tdm out bck inverse register to AUDIO_TOP_CON3[3]. Signed-off-by: Jiaxin Yu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>

dgreid reviewed Aug 29, 2019

View reviewed changes

Peter Ujfalusi and others added 11 commits August 30, 2019 12:22

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Upstream/rt5677 #3

Upstream/rt5677 #3

cujomalainey commented Aug 23, 2019

dgreid left a comment

dgreid Aug 29, 2019

cujomalainey Aug 30, 2019

Upstream/rt5677 #3

Upstream/rt5677 #3

Conversation

cujomalainey commented Aug 23, 2019

dgreid left a comment

Choose a reason for hiding this comment

dgreid Aug 29, 2019

Choose a reason for hiding this comment

cujomalainey Aug 30, 2019

Choose a reason for hiding this comment