Clean up cnl_rt700 machine driver #2

bardliao · 2019-06-20T13:33:33Z

Clean up cnl_rt700 machine driver and add hdmi support.

Add rt700 matching table. Signed-off-by: Bard Liao <[email protected]>

Clean up cnl_rt700 machine driver and add hdmi support. Signed-off-by: Bard Liao <[email protected]>

When receiving a deauthentication/disassociation frame from a TDLS peer, a station should not disconnect the current AP, but only disable the current TDLS link if it's enabled. Without this change, a TDLS issue can be reproduced by following the steps as below: 1. STA-1 and STA-2 are connected to AP, bidirection traffic is running between STA-1 and STA-2. 2. Set up TDLS link between STA-1 and STA-2, stay for a while, then teardown TDLS link. 3. Repeat step #2 and monitor the connection between STA and AP. During the test, one STA may send a deauthentication/disassociation frame to another, after TDLS teardown, with reason code 6/7, which means: Class 2/3 frame received from nonassociated STA. On receive this frame, the receiver STA will disconnect the current AP and then reconnect. It's not a expected behavior, purpose of this frame should be disabling the TDLS link, not the link with AP. Cc: [email protected] Signed-off-by: Yu Wang <[email protected]> Signed-off-by: Johannes Berg <[email protected]>

struct dfl_feature_platform_data (and it's mutex) is used by both fme and port devices, and when lockdep is enabled it complains about nesting between these locks. Tell lockdep about the difference so it can track each class separately. Here's the lockdep complaint: [ 409.680668] WARNING: possible recursive locking detected [ 409.685983] 5.1.0-rc3.fpga+ #1 Tainted: G E [ 409.691469] -------------------------------------------- [ 409.696779] fpgaconf/9348 is trying to acquire lock: [ 409.701746] 00000000a443fe2e (&pdata->lock){+.+.}, at: port_enable_set+0x24/0x60 [dfl_afu] [ 409.710006] [ 409.710006] but task is already holding lock: [ 409.715837] 0000000063b78782 (&pdata->lock){+.+.}, at: fme_pr_ioctl+0x21d/0x330 [dfl_fme] [ 409.724012] [ 409.724012] other info that might help us debug this: [ 409.730535] Possible unsafe locking scenario: [ 409.730535] [ 409.736457] CPU0 [ 409.738910] ---- [ 409.741360] lock(&pdata->lock); [ 409.744679] lock(&pdata->lock); [ 409.747999] [ 409.747999] *** DEADLOCK *** [ 409.747999] [ 409.753920] May be due to missing lock nesting notation [ 409.753920] [ 409.760704] 4 locks held by fpgaconf/9348: [ 409.764805] #0: 0000000063b78782 (&pdata->lock){+.+.}, at: fme_pr_ioctl+0x21d/0x330 [dfl_fme] [ 409.773408] #1: 00000000213c8a66 (&region->mutex){+.+.}, at: fpga_region_program_fpga+0x24/0x200 [fpga_region] [ 409.783489] #2: 00000000fe63afb9 (&mgr->ref_mutex){+.+.}, at: fpga_mgr_lock+0x15/0x40 [fpga_mgr] [ 409.792354] #3: 000000000b2285c5 (&bridge->mutex){+.+.}, at: __fpga_bridge_get+0x26/0xa0 [fpga_bridge] [ 409.801740] [ 409.801740] stack backtrace: [ 409.806102] CPU: 45 PID: 9348 Comm: fpgaconf Kdump: loaded Tainted: G E 5.1.0-rc3.fpga+ #1 [ 409.815658] Hardware name: Intel Corporation S2600BT/S2600BT, BIOS SE5C620.86B.01.00.0763.022420181017 02/24/2018 [ 409.825911] Call Trace: [ 409.828369] dump_stack+0x5e/0x8b [ 409.831686] __lock_acquire+0xf3d/0x10e0 [ 409.835612] ? find_held_lock+0x3c/0xa0 [ 409.839451] lock_acquire+0xbc/0x1d0 [ 409.843030] ? port_enable_set+0x24/0x60 [dfl_afu] [ 409.847823] ? port_enable_set+0x24/0x60 [dfl_afu] [ 409.852616] __mutex_lock+0x86/0x970 [ 409.856195] ? port_enable_set+0x24/0x60 [dfl_afu] [ 409.860989] ? port_enable_set+0x24/0x60 [dfl_afu] [ 409.865777] ? __mutex_unlock_slowpath+0x4b/0x290 [ 409.870486] port_enable_set+0x24/0x60 [dfl_afu] [ 409.875106] fpga_bridges_disable+0x36/0x50 [fpga_bridge] [ 409.880502] fpga_region_program_fpga+0xea/0x200 [fpga_region] [ 409.886338] fme_pr_ioctl+0x13e/0x330 [dfl_fme] [ 409.890870] fme_ioctl+0x66/0xe0 [dfl_fme] [ 409.894973] do_vfs_ioctl+0xa9/0x720 [ 409.898548] ? lockdep_hardirqs_on+0xf0/0x1a0 [ 409.902907] ksys_ioctl+0x60/0x90 [ 409.906225] __x64_sys_ioctl+0x16/0x20 [ 409.909981] do_syscall_64+0x5a/0x220 [ 409.913644] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 409.918698] RIP: 0033:0x7f9d31b9b8d7 [ 409.922276] Code: 44 00 00 48 8b 05 b9 15 2d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 89 15 2d 00 f7 d8 64 89 01 48 [ 409.941020] RSP: 002b:00007ffe4cae0d68 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [ 409.948588] RAX: ffffffffffffffda RBX: 00007f9d32ade6a0 RCX: 00007f9d31b9b8d7 [ 409.955719] RDX: 00007ffe4cae0df0 RSI: 000000000000b680 RDI: 0000000000000003 [ 409.962852] RBP: 0000000000000003 R08: 00007f9d2b70a177 R09: 00007ffe4cae0e40 [ 409.969984] R10: 00007ffe4cae0160 R11: 0000000000000202 R12: 00007ffe4cae0df0 [ 409.977115] R13: 000000000000b680 R14: 0000000000000000 R15: 00007ffe4cae0f60 Signed-off-by: Scott Wood <[email protected]> Acked-by: Wu Hao <[email protected]> Acked-by: Alan Tull <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

ifmsh->csa is an RCU-protected pointer. The writer context in ieee80211_mesh_finish_csa() is already mutually exclusive with wdev->sdata.mtx, but the RCU checker did not know this. Use rcu_dereference_protected() to avoid a warning. fixes the following warning: [ 12.519089] ============================= [ 12.520042] WARNING: suspicious RCU usage [ 12.520652] 5.1.0-rc7-wt+ thesofproject#16 Tainted: G W [ 12.521409] ----------------------------- [ 12.521972] net/mac80211/mesh.c:1223 suspicious rcu_dereference_check() usage! [ 12.522928] other info that might help us debug this: [ 12.523984] rcu_scheduler_active = 2, debug_locks = 1 [ 12.524855] 5 locks held by kworker/u8:2/152: [ 12.525438] #0: 00000000057be08c ((wq_completion)phy0){+.+.}, at: process_one_work+0x1a2/0x620 [ 12.526607] #1: 0000000059c6b07a ((work_completion)(&sdata->csa_finalize_work)){+.+.}, at: process_one_work+0x1a2/0x620 [ 12.528001] #2: 00000000f184ba7d (&wdev->mtx){+.+.}, at: ieee80211_csa_finalize_work+0x2f/0x90 [ 12.529116] #3: 00000000831a1f54 (&local->mtx){+.+.}, at: ieee80211_csa_finalize_work+0x47/0x90 [ 12.530233] #4: 00000000fd06f988 (&local->chanctx_mtx){+.+.}, at: ieee80211_csa_finalize_work+0x51/0x90 Signed-off-by: Thomas Pedersen <[email protected]> Signed-off-by: Johannes Berg <[email protected]>

…utex Remove circular lock dependency by using atomic version of interfaces iterate in watch_dog_work(), hence avoid taking local->iflist_mtx (rtw_vif_watch_dog_iter() only update some data, it can be called from atomic context). Fixes below LOCKDEP warning: [ 1157.219415] ====================================================== [ 1157.225772] [ INFO: possible circular locking dependency detected ] [ 1157.232150] 3.10.0-1043.el7.sgruszka1.x86_64.debug #1 Not tainted [ 1157.238346] ------------------------------------------------------- [ 1157.244635] kworker/u4:2/14490 is trying to acquire lock: [ 1157.250194] (&rtwdev->mutex){+.+.+.}, at: [<ffffffffc098322b>] rtw_ops_config+0x2b/0x90 [rtw88] [ 1157.259151] but task is already holding lock: [ 1157.265085] (&local->iflist_mtx){+.+...}, at: [<ffffffffc0b8ab7a>] ieee80211_mgd_probe_ap.part.28+0xca/0x160 [mac80211] [ 1157.276169] which lock already depends on the new lock. [ 1157.284488] the existing dependency chain (in reverse order) is: [ 1157.292101] -> #2 (&local->iflist_mtx){+.+...}: [ 1157.296919] [<ffffffffbc741a29>] lock_acquire+0x99/0x1e0 [ 1157.302955] [<ffffffffbce72793>] mutex_lock_nested+0x93/0x410 [ 1157.309416] [<ffffffffc0b6038f>] ieee80211_iterate_interfaces+0x2f/0x60 [mac80211] [ 1157.317730] [<ffffffffc09811ab>] rtw_watch_dog_work+0xcb/0x130 [rtw88] [ 1157.325003] [<ffffffffbc6d77bc>] process_one_work+0x22c/0x720 [ 1157.331481] [<ffffffffbc6d7dd6>] worker_thread+0x126/0x3b0 [ 1157.337589] [<ffffffffbc6e107f>] kthread+0xef/0x100 [ 1157.343260] [<ffffffffbce848b7>] ret_from_fork_nospec_end+0x0/0x39 [ 1157.350091] -> #1 ((&(&rtwdev->watch_dog_work)->work)){+.+...}: [ 1157.356314] [<ffffffffbc741a29>] lock_acquire+0x99/0x1e0 [ 1157.362427] [<ffffffffbc6d570b>] flush_work+0x5b/0x310 [ 1157.368287] [<ffffffffbc6d740e>] __cancel_work_timer+0xae/0x170 [ 1157.374940] [<ffffffffbc6d7583>] cancel_delayed_work_sync+0x13/0x20 [ 1157.381930] [<ffffffffc0982b49>] rtw_core_stop+0x29/0x50 [rtw88] [ 1157.388679] [<ffffffffc098bee6>] rtw_enter_ips+0x16/0x20 [rtw88] [ 1157.395428] [<ffffffffc0983242>] rtw_ops_config+0x42/0x90 [rtw88] [ 1157.402173] [<ffffffffc0b13343>] ieee80211_hw_config+0xc3/0x680 [mac80211] [ 1157.409854] [<ffffffffc0b3925b>] ieee80211_do_open+0x69b/0x9c0 [mac80211] [ 1157.417418] [<ffffffffc0b395e9>] ieee80211_open+0x69/0x70 [mac80211] [ 1157.424496] [<ffffffffbcd03442>] __dev_open+0xe2/0x160 [ 1157.430356] [<ffffffffbcd03773>] __dev_change_flags+0xa3/0x180 [ 1157.436922] [<ffffffffbcd03879>] dev_change_flags+0x29/0x60 [ 1157.443224] [<ffffffffbcda14c4>] devinet_ioctl+0x794/0x890 [ 1157.449331] [<ffffffffbcda27b5>] inet_ioctl+0x75/0xa0 [ 1157.455087] [<ffffffffbccd54eb>] sock_do_ioctl+0x2b/0x60 [ 1157.461178] [<ffffffffbccd5753>] sock_ioctl+0x233/0x310 [ 1157.467109] [<ffffffffbc8bd820>] do_vfs_ioctl+0x410/0x6c0 [ 1157.473233] [<ffffffffbc8bdb71>] SyS_ioctl+0xa1/0xc0 [ 1157.478914] [<ffffffffbce84a5e>] system_call_fastpath+0x25/0x2a [ 1157.485569] -> #0 (&rtwdev->mutex){+.+.+.}: [ 1157.490022] [<ffffffffbc7409d1>] __lock_acquire+0xec1/0x1630 [ 1157.496305] [<ffffffffbc741a29>] lock_acquire+0x99/0x1e0 [ 1157.502413] [<ffffffffbce72793>] mutex_lock_nested+0x93/0x410 [ 1157.508890] [<ffffffffc098322b>] rtw_ops_config+0x2b/0x90 [rtw88] [ 1157.515724] [<ffffffffc0b13343>] ieee80211_hw_config+0xc3/0x680 [mac80211] [ 1157.523370] [<ffffffffc0b8a4ca>] ieee80211_recalc_ps.part.27+0x9a/0x180 [mac80211] [ 1157.531685] [<ffffffffc0b8abc5>] ieee80211_mgd_probe_ap.part.28+0x115/0x160 [mac80211] [ 1157.540353] [<ffffffffc0b8b40d>] ieee80211_beacon_connection_loss_work+0x4d/0x80 [mac80211] [ 1157.549513] [<ffffffffbc6d77bc>] process_one_work+0x22c/0x720 [ 1157.555886] [<ffffffffbc6d7dd6>] worker_thread+0x126/0x3b0 [ 1157.562170] [<ffffffffbc6e107f>] kthread+0xef/0x100 [ 1157.567765] [<ffffffffbce848b7>] ret_from_fork_nospec_end+0x0/0x39 [ 1157.574579] other info that might help us debug this: [ 1157.582788] Chain exists of: &rtwdev->mutex --> (&(&rtwdev->watch_dog_work)->work) --> &local->iflist_mtx [ 1157.593024] Possible unsafe locking scenario: [ 1157.599046] CPU0 CPU1 [ 1157.603653] ---- ---- [ 1157.608258] lock(&local->iflist_mtx); [ 1157.612180] lock((&(&rtwdev->watch_dog_work)->work)); [ 1157.620074] lock(&local->iflist_mtx); [ 1157.626555] lock(&rtwdev->mutex); [ 1157.630124] *** DEADLOCK *** [ 1157.636148] 4 locks held by kworker/u4:2/14490: [ 1157.640755] #0: (%s#6){.+.+.+}, at: [<ffffffffbc6d774a>] process_one_work+0x1ba/0x720 [ 1157.648965] #1: ((&ifmgd->beacon_connection_loss_work)){+.+.+.}, at: [<ffffffffbc6d774a>] process_one_work+0x1ba/0x720 [ 1157.659950] #2: (&wdev->mtx){+.+.+.}, at: [<ffffffffc0b8aad5>] ieee80211_mgd_probe_ap.part.28+0x25/0x160 [mac80211] [ 1157.670901] #3: (&local->iflist_mtx){+.+...}, at: [<ffffffffc0b8ab7a>] ieee80211_mgd_probe_ap.part.28+0xca/0x160 [mac80211] [ 1157.682466] Fixes: e303748 ("rtw88: new Realtek 802.11ac driver") Signed-off-by: Stanislaw Gruszka <[email protected]> Acked-by: Yan-Hsuan Chuang <[email protected]> Signed-off-by: Kalle Valo <[email protected]>

Booting with kernel parameter "rdt=cmt,mbmtotal,memlocal,l3cat,mba" and executing "mount -t resctrl resctrl -o mba_MBps /sys/fs/resctrl" results in a NULL pointer dereference on systems which do not have local MBM support enabled.. BUG: kernel NULL pointer dereference, address: 0000000000000020 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 722 Comm: kworker/0:3 Not tainted 5.2.0-0.rc3.git0.1.el7_UNSUPPORTED.x86_64 #2 Workqueue: events mbm_handle_overflow RIP: 0010:mbm_handle_overflow+0x150/0x2b0 Only enter the bandwith update loop if the system has local MBM enabled. Fixes: de73f38 ("x86/intel_rdt/mba_sc: Feedback loop to dynamically update mem bandwidth") Signed-off-by: Prarit Bhargava <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: Fenghua Yu <[email protected]> Cc: Reinette Chatre <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]

Ido Schimmel says: ==================== mlxsw: Various fixes This patchset contains various fixes for mlxsw. Patch #1 fixes an hash polarization problem when a nexthop device is a LAG device. This is caused by the fact that the same seed is used for the LAG and ECMP hash functions. Patch #2 fixes an issue in which the driver fails to refresh a nexthop neighbour after it becomes dead. This prevents the nexthop from ever being written to the adjacency table and used to forward traffic. Patch Patch #4 fixes a wrong extraction of TOS value in flower offload code. Patch thesofproject#5 is a test case. Patch thesofproject#6 works around a buffer issue in Spectrum-2 by reducing the default sizes of the shared buffer pools. Patch thesofproject#7 prevents prio-tagged packets from entering the switch when PVID is removed from the bridge port. Please consider patches #2, #4 and thesofproject#6 for 5.1.y ==================== Signed-off-by: David S. Miller <[email protected]>

…nux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm fixes for 5.2, take #2 - SVE cleanup killing a warning with ancient GCC versions - Don't report non-existent system registers to userspace - Fix memory leak when freeing the vgic ITS - Properly lower the interrupt on the emulated physical timer

…OL_MF_STRICT were specified When both MPOL_MF_MOVE* and MPOL_MF_STRICT was specified, mbind() should try best to migrate misplaced pages, if some of the pages could not be migrated, then return -EIO. There are three different sub-cases: 1. vma is not migratable 2. vma is migratable, but there are unmovable pages 3. vma is migratable, pages are movable, but migrate_pages() fails If #1 happens, kernel would just abort immediately, then return -EIO, after a7f40cf ("mm: mempolicy: make mbind() return -EIO when MPOL_MF_STRICT is specified"). If #3 happens, kernel would set policy and migrate pages with best-effort, but won't rollback the migrated pages and reset the policy back. Before that commit, they behaves in the same way. It'd better to keep their behavior consistent. But, rolling back the migrated pages and resetting the policy back sounds not feasible, so just make #1 behave as same as #3. Userspace will know that not everything was successfully migrated (via -EIO), and can take whatever steps it deems necessary - attempt rollback, determine which exact page(s) are violating the policy, etc. Make queue_pages_range() return 1 to indicate there are unmovable pages or vma is not migratable. The #2 is not handled correctly in the current kernel, the following patch will fix it. [[email protected]: fix review comments from Vlastimil] Link: http://lkml.kernel.org/r/[email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Yang Shi <[email protected]> Reviewed-by: Vlastimil Babka <[email protected]> Cc: Michal Hocko <[email protected]> Cc: Mel Gorman <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>

When running syzkaller internally, we ran into the below bug on 4.9.x kernel: kernel BUG at mm/huge_memory.c:2124! invalid opcode: 0000 [#1] SMP KASAN CPU: 0 PID: 1518 Comm: syz-executor107 Not tainted 4.9.168+ #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.5.1 01/01/2011 task: ffff880067b34900 task.stack: ffff880068998000 RIP: split_huge_page_to_list+0x8fb/0x1030 mm/huge_memory.c:2124 Call Trace: split_huge_page include/linux/huge_mm.h:100 [inline] queue_pages_pte_range+0x7e1/0x1480 mm/mempolicy.c:538 walk_pmd_range mm/pagewalk.c:50 [inline] walk_pud_range mm/pagewalk.c:90 [inline] walk_pgd_range mm/pagewalk.c:116 [inline] __walk_page_range+0x44a/0xdb0 mm/pagewalk.c:208 walk_page_range+0x154/0x370 mm/pagewalk.c:285 queue_pages_range+0x115/0x150 mm/mempolicy.c:694 do_mbind mm/mempolicy.c:1241 [inline] SYSC_mbind+0x3c3/0x1030 mm/mempolicy.c:1370 SyS_mbind+0x46/0x60 mm/mempolicy.c:1352 do_syscall_64+0x1d2/0x600 arch/x86/entry/common.c:282 entry_SYSCALL_64_after_swapgs+0x5d/0xdb Code: c7 80 1c 02 00 e8 26 0a 76 01 <0f> 0b 48 c7 c7 40 46 45 84 e8 4c RIP [<ffffffff81895d6b>] split_huge_page_to_list+0x8fb/0x1030 mm/huge_memory.c:2124 RSP <ffff88006899f980> with the below test: uint64_t r[1] = {0xffffffffffffffff}; int main(void) { syscall(__NR_mmap, 0x20000000, 0x1000000, 3, 0x32, -1, 0); intptr_t res = 0; res = syscall(__NR_socket, 0x11, 3, 0x300); if (res != -1) r[0] = res; *(uint32_t*)0x20000040 = 0x10000; *(uint32_t*)0x20000044 = 1; *(uint32_t*)0x20000048 = 0xc520; *(uint32_t*)0x2000004c = 1; syscall(__NR_setsockopt, r[0], 0x107, 0xd, 0x20000040, 0x10); syscall(__NR_mmap, 0x20fed000, 0x10000, 0, 0x8811, r[0], 0); *(uint64_t*)0x20000340 = 2; syscall(__NR_mbind, 0x20ff9000, 0x4000, 0x4002, 0x20000340, 0x45d4, 3); return 0; } Actually the test does: mmap(0x20000000, 16777216, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x20000000 socket(AF_PACKET, SOCK_RAW, 768) = 3 setsockopt(3, SOL_PACKET, PACKET_TX_RING, {block_size=65536, block_nr=1, frame_size=50464, frame_nr=1}, 16) = 0 mmap(0x20fed000, 65536, PROT_NONE, MAP_SHARED|MAP_FIXED|MAP_POPULATE|MAP_DENYWRITE, 3, 0) = 0x20fed000 mbind(..., MPOL_MF_STRICT|MPOL_MF_MOVE) = 0 The setsockopt() would allocate compound pages (16 pages in this test) for packet tx ring, then the mmap() would call packet_mmap() to map the pages into the user address space specified by the mmap() call. When calling mbind(), it would scan the vma to queue the pages for migration to the new node. It would split any huge page since 4.9 doesn't support THP migration, however, the packet tx ring compound pages are not THP and even not movable. So, the above bug is triggered. However, the later kernel is not hit by this issue due to commit d44d363 ("mm: don't assume anonymous pages have SwapBacked flag"), which just removes the PageSwapBacked check for a different reason. But, there is a deeper issue. According to the semantic of mbind(), it should return -EIO if MPOL_MF_MOVE or MPOL_MF_MOVE_ALL was specified and MPOL_MF_STRICT was also specified, but the kernel was unable to move all existing pages in the range. The tx ring of the packet socket is definitely not movable, however, mbind() returns success for this case. Although the most socket file associates with non-movable pages, but XDP may have movable pages from gup. So, it sounds not fine to just check the underlying file type of vma in vma_migratable(). Change migrate_page_add() to check if the page is movable or not, if it is unmovable, just return -EIO. But do not abort pte walk immediately, since there may be pages off LRU temporarily. We should migrate other pages if MPOL_MF_MOVE* is specified. Set has_unmovable flag if some paged could not be not moved, then return -EIO for mbind() eventually. With this change the above test would return -EIO as expected. [[email protected]: fix review comments from Vlastimil] Link: http://lkml.kernel.org/r/[email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Yang Shi <[email protected]> Reviewed-by: Vlastimil Babka <[email protected]> Cc: Michal Hocko <[email protected]> Cc: Mel Gorman <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>

Since commit e1ab9a4 ("i2c: imx: improve the error handling in i2c_imx_dma_request()") when booting with the DMA driver as module (such as CONFIG_FSL_EDMA=m) the following endless clk warnings are seen: [ 153.077831] ------------[ cut here ]------------ [ 153.082528] WARNING: CPU: 0 PID: 15 at drivers/clk/clk.c:924 clk_core_disable_lock+0x18/0x24 [ 153.093077] i2c0 already disabled [ 153.096416] Modules linked in: [ 153.099521] CPU: 0 PID: 15 Comm: kworker/0:1 Tainted: G W 5.2.0+ thesofproject#321 [ 153.107290] Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree) [ 153.113772] Workqueue: events deferred_probe_work_func [ 153.118979] [<c0019560>] (unwind_backtrace) from [<c0014734>] (show_stack+0x10/0x14) [ 153.126778] [<c0014734>] (show_stack) from [<c083f8dc>] (dump_stack+0x9c/0xd4) [ 153.134051] [<c083f8dc>] (dump_stack) from [<c0031154>] (__warn+0xf8/0x124) [ 153.141056] [<c0031154>] (__warn) from [<c0031248>] (warn_slowpath_fmt+0x38/0x48) [ 153.148580] [<c0031248>] (warn_slowpath_fmt) from [<c040fde0>] (clk_core_disable_lock+0x18/0x24) [ 153.157413] [<c040fde0>] (clk_core_disable_lock) from [<c058f520>] (i2c_imx_probe+0x554/0x6ec) [ 153.166076] [<c058f520>] (i2c_imx_probe) from [<c04b9178>] (platform_drv_probe+0x48/0x98) [ 153.174297] [<c04b9178>] (platform_drv_probe) from [<c04b7298>] (really_probe+0x1d8/0x2c0) [ 153.182605] [<c04b7298>] (really_probe) from [<c04b7554>] (driver_probe_device+0x5c/0x174) [ 153.190909] [<c04b7554>] (driver_probe_device) from [<c04b58c8>] (bus_for_each_drv+0x44/0x8c) [ 153.199480] [<c04b58c8>] (bus_for_each_drv) from [<c04b746c>] (__device_attach+0xa0/0x108) [ 153.207782] [<c04b746c>] (__device_attach) from [<c04b65a4>] (bus_probe_device+0x88/0x90) [ 153.215999] [<c04b65a4>] (bus_probe_device) from [<c04b6a04>] (deferred_probe_work_func+0x60/0x90) [ 153.225003] [<c04b6a04>] (deferred_probe_work_func) from [<c004f190>] (process_one_work+0x204/0x634) [ 153.234178] [<c004f190>] (process_one_work) from [<c004f618>] (worker_thread+0x20/0x484) [ 153.242315] [<c004f618>] (worker_thread) from [<c0055c2c>] (kthread+0x118/0x150) [ 153.249758] [<c0055c2c>] (kthread) from [<c00090b4>] (ret_from_fork+0x14/0x20) [ 153.257006] Exception stack(0xdde43fb0 to 0xdde43ff8) [ 153.262095] 3fa0: 00000000 00000000 00000000 00000000 [ 153.270306] 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 153.278520] 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 153.285159] irq event stamp: 3323022 [ 153.288787] hardirqs last enabled at (3323021): [<c0861c4c>] _raw_spin_unlock_irq+0x24/0x2c [ 153.297261] hardirqs last disabled at (3323022): [<c040d7a0>] clk_enable_lock+0x10/0x124 [ 153.305392] softirqs last enabled at (3322092): [<c000a504>] __do_softirq+0x344/0x540 [ 153.313352] softirqs last disabled at (3322081): [<c00385c0>] irq_exit+0x10c/0x128 [ 153.320946] ---[ end trace a506731ccd9bd703 ]--- This endless clk warnings behaviour is well explained by Andrey Smirnov: "Allocating DMA after registering I2C adapter can lead to infinite probing loop, for example, consider the following scenario: 1. i2c_imx_probe() is called and successfully registers an I2C adapter via i2c_add_numbered_adapter() 2. As a part of i2c_add_numbered_adapter() new I2C slave devices are added from DT which results in a call to driver_deferred_probe_trigger() 3. i2c_imx_probe() continues and calls i2c_imx_dma_request() which due to lack of proper DMA driver returns -EPROBE_DEFER 4. i2c_imx_probe() fails, removes I2C adapter and returns -EPROBE_DEFER, which places it into deferred probe list 5. Deferred probe work triggered in #2 above kicks in and calls i2c_imx_probe() again thus bringing us to step #1" So revert commit e1ab9a4 ("i2c: imx: improve the error handling in i2c_imx_dma_request()") and restore the old behaviour, in order to avoid regressions on existing setups. Cc: <[email protected]> Reported-by: Andrey Smirnov <[email protected]> Reported-by: Russell King <[email protected]> Fixes: e1ab9a4 ("i2c: imx: improve the error handling in i2c_imx_dma_request()") Signed-off-by: Fabio Estevam <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>

Revert the commit bd293d0. The proper fix has been made available with commit d0a255e ("loop: set PF_MEMALLOC_NOIO for the worker thread"). Note that the fix offered by commit bd293d0 doesn't really prevent the deadlock from occuring - if we look at the stacktrace reported by Junxiao Bi, we see that it hangs in bit_wait_io and not on the mutex - i.e. it has already successfully taken the mutex. Changing the mutex from mutex_lock to mutex_trylock won't help with deadlocks that happen afterwards. PID: 474 TASK: ffff8813e11f4600 CPU: 10 COMMAND: "kswapd0" #0 [ffff8813dedfb938] __schedule at ffffffff8173f405 #1 [ffff8813dedfb990] schedule at ffffffff8173fa27 #2 [ffff8813dedfb9b0] schedule_timeout at ffffffff81742fec #3 [ffff8813dedfba60] io_schedule_timeout at ffffffff8173f186 #4 [ffff8813dedfbaa0] bit_wait_io at ffffffff8174034f thesofproject#5 [ffff8813dedfbac0] __wait_on_bit at ffffffff8173fec8 thesofproject#6 [ffff8813dedfbb10] out_of_line_wait_on_bit at ffffffff8173ff81 thesofproject#7 [ffff8813dedfbb90] __make_buffer_clean at ffffffffa038736f [dm_bufio] thesofproject#8 [ffff8813dedfbbb0] __try_evict_buffer at ffffffffa0387bb8 [dm_bufio] thesofproject#9 [ffff8813dedfbbd0] dm_bufio_shrink_scan at ffffffffa0387cc3 [dm_bufio] thesofproject#10 [ffff8813dedfbc40] shrink_slab at ffffffff811a87ce thesofproject#11 [ffff8813dedfbd30] shrink_zone at ffffffff811ad778 thesofproject#12 [ffff8813dedfbdc0] kswapd at ffffffff811ae92f thesofproject#13 [ffff8813dedfbec0] kthread at ffffffff810a8428 thesofproject#14 [ffff8813dedfbf50] ret_from_fork at ffffffff81745242 Signed-off-by: Mikulas Patocka <[email protected]> Cc: [email protected] Fixes: bd293d0 ("dm bufio: fix deadlock with loop device") Depends-on: d0a255e ("loop: set PF_MEMALLOC_NOIO for the worker thread") Signed-off-by: Mike Snitzer <[email protected]>

Pablo Neira Ayuso says: ==================== flow_offload hardware priority fixes This patchset contains two updates for the flow_offload users: 1) Pass the major tc priority to drivers so they do not have to lshift it. This is a preparation patch for the fix coming in patch #2. 2) Set the hardware priority from the netfilter basechain priority, some drivers break when using the existing hardware priority number that is set to zero. v5: fix patch 2/2 to address a clang warning and to simplify the priority mapping. ==================== Signed-off-by: David S. Miller <[email protected]>

Calling ceph_buffer_put() in __ceph_setxattr() may end up freeing the i_xattrs.prealloc_blob buffer while holding the i_ceph_lock. This can be fixed by postponing the call until later, when the lock is released. The following backtrace was triggered by fstests generic/117. BUG: sleeping function called from invalid context at mm/vmalloc.c:2283 in_atomic(): 1, irqs_disabled(): 0, pid: 650, name: fsstress 3 locks held by fsstress/650: #0: 00000000870a0fe8 (sb_writers#8){.+.+}, at: mnt_want_write+0x20/0x50 #1: 00000000ba0c4c74 (&type->i_mutex_dir_key#6){++++}, at: vfs_setxattr+0x55/0xa0 #2: 000000008dfbb3f2 (&(&ci->i_ceph_lock)->rlock){+.+.}, at: __ceph_setxattr+0x297/0x810 CPU: 1 PID: 650 Comm: fsstress Not tainted 5.2.0+ thesofproject#437 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack+0x67/0x90 ___might_sleep.cold+0x9f/0xb1 vfree+0x4b/0x60 ceph_buffer_release+0x1b/0x60 __ceph_setxattr+0x2b4/0x810 __vfs_setxattr+0x66/0x80 __vfs_setxattr_noperm+0x59/0xf0 vfs_setxattr+0x81/0xa0 setxattr+0x115/0x230 ? filename_lookup+0xc9/0x140 ? rcu_read_lock_sched_held+0x74/0x80 ? rcu_sync_lockdep_assert+0x2e/0x60 ? __sb_start_write+0x142/0x1a0 ? mnt_want_write+0x20/0x50 path_setxattr+0xba/0xd0 __x64_sys_lsetxattr+0x24/0x30 do_syscall_64+0x50/0x1c0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7ff23514359a Signed-off-by: Luis Henriques <[email protected]> Reviewed-by: Jeff Layton <[email protected]> Signed-off-by: Ilya Dryomov <[email protected]>

…s_blob() Calling ceph_buffer_put() in __ceph_build_xattrs_blob() may result in freeing the i_xattrs.blob buffer while holding the i_ceph_lock. This can be fixed by having this function returning the old blob buffer and have the callers of this function freeing it when the lock is released. The following backtrace was triggered by fstests generic/117. BUG: sleeping function called from invalid context at mm/vmalloc.c:2283 in_atomic(): 1, irqs_disabled(): 0, pid: 649, name: fsstress 4 locks held by fsstress/649: #0: 00000000a7478e7e (&type->s_umount_key#19){++++}, at: iterate_supers+0x77/0xf0 #1: 00000000f8de1423 (&(&ci->i_ceph_lock)->rlock){+.+.}, at: ceph_check_caps+0x7b/0xc60 #2: 00000000562f2b27 (&s->s_mutex){+.+.}, at: ceph_check_caps+0x3bd/0xc60 #3: 00000000f83ce16a (&mdsc->snap_rwsem){++++}, at: ceph_check_caps+0x3ed/0xc60 CPU: 1 PID: 649 Comm: fsstress Not tainted 5.2.0+ thesofproject#439 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack+0x67/0x90 ___might_sleep.cold+0x9f/0xb1 vfree+0x4b/0x60 ceph_buffer_release+0x1b/0x60 __ceph_build_xattrs_blob+0x12b/0x170 __send_cap+0x302/0x540 ? __lock_acquire+0x23c/0x1e40 ? __mark_caps_flushing+0x15c/0x280 ? _raw_spin_unlock+0x24/0x30 ceph_check_caps+0x5f0/0xc60 ceph_flush_dirty_caps+0x7c/0x150 ? __ia32_sys_fdatasync+0x20/0x20 ceph_sync_fs+0x5a/0x130 iterate_supers+0x8f/0xf0 ksys_sync+0x4f/0xb0 __ia32_sys_sync+0xa/0x10 do_syscall_64+0x50/0x1c0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7fc6409ab617 Signed-off-by: Luis Henriques <[email protected]> Reviewed-by: Jeff Layton <[email protected]> Signed-off-by: Ilya Dryomov <[email protected]>

Calling ceph_buffer_put() in fill_inode() may result in freeing the i_xattrs.blob buffer while holding the i_ceph_lock. This can be fixed by postponing the call until later, when the lock is released. The following backtrace was triggered by fstests generic/070. BUG: sleeping function called from invalid context at mm/vmalloc.c:2283 in_atomic(): 1, irqs_disabled(): 0, pid: 3852, name: kworker/0:4 6 locks held by kworker/0:4/3852: #0: 000000004270f6bb ((wq_completion)ceph-msgr){+.+.}, at: process_one_work+0x1b8/0x5f0 #1: 00000000eb420803 ((work_completion)(&(&con->work)->work)){+.+.}, at: process_one_work+0x1b8/0x5f0 #2: 00000000be1c53a4 (&s->s_mutex){+.+.}, at: dispatch+0x288/0x1476 #3: 00000000559cb958 (&mdsc->snap_rwsem){++++}, at: dispatch+0x2eb/0x1476 #4: 000000000d5ebbae (&req->r_fill_mutex){+.+.}, at: dispatch+0x2fc/0x1476 thesofproject#5: 00000000a83d0514 (&(&ci->i_ceph_lock)->rlock){+.+.}, at: fill_inode.isra.0+0xf8/0xf70 CPU: 0 PID: 3852 Comm: kworker/0:4 Not tainted 5.2.0+ thesofproject#441 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58-prebuilt.qemu.org 04/01/2014 Workqueue: ceph-msgr ceph_con_workfn Call Trace: dump_stack+0x67/0x90 ___might_sleep.cold+0x9f/0xb1 vfree+0x4b/0x60 ceph_buffer_release+0x1b/0x60 fill_inode.isra.0+0xa9b/0xf70 ceph_fill_trace+0x13b/0xc70 ? dispatch+0x2eb/0x1476 dispatch+0x320/0x1476 ? __mutex_unlock_slowpath+0x4d/0x2a0 ceph_con_workfn+0xc97/0x2ec0 ? process_one_work+0x1b8/0x5f0 process_one_work+0x244/0x5f0 worker_thread+0x4d/0x3e0 kthread+0x105/0x140 ? process_one_work+0x5f0/0x5f0 ? kthread_park+0x90/0x90 ret_from_fork+0x3a/0x50 Signed-off-by: Luis Henriques <[email protected]> Reviewed-by: Jeff Layton <[email protected]> Signed-off-by: Ilya Dryomov <[email protected]>

Hayes Wang says: ==================== r8152: fix side effect v3: Update the commit message for patch #1. v2: Replace patch #2 with "r8152: remove calling netif_napi_del". v1: The commit 0ee1f47 ("r8152: napi hangup fix after disconnect") add a check to avoid using napi_disable after netif_napi_del. However, the commit ffa9fec ("r8152: set RTL8152_UNPLUG only for real disconnection") let the check useless. Therefore, I revert commit 0ee1f47 ("r8152: napi hangup fix after disconnect") first, and add another patch to fix it. ==================== Signed-off-by: David S. Miller <[email protected]>

…#2] When a local endpoint is ceases to be in use, such as when the kafs module is unloaded, the kernel will emit an assertion failure if there are any outstanding client connections: rxrpc: Assertion failed ------------[ cut here ]------------ kernel BUG at net/rxrpc/local_object.c:433! and even beyond that, will evince other oopses if there are service connections still present. Fix this by: (1) Removing the triggering of connection reaping when an rxrpc socket is released. These don't actually clean up the connections anyway - and further, the local endpoint may still be in use through another socket. (2) Mark the local endpoint as dead when we start the process of tearing it down. (3) When destroying a local endpoint, strip all of its client connections from the idle list and discard the ref on each that the list was holding. (4) When destroying a local endpoint, call the service connection reaper directly (rather than through a workqueue) to immediately kill off all outstanding service connections. (5) Make the service connection reaper reap connections for which the local endpoint is marked dead. Only after destroying the connections can we close the socket lest we get an oops in a workqueue that's looking at a connection or a peer. Fixes: 3d18cbb ("rxrpc: Fix conn expiry timers") Signed-off-by: David Howells <[email protected]> Tested-by: Marc Dionne <[email protected]> Signed-off-by: David S. Miller <[email protected]>

Pull networking fixes from David Miller: 1) Fix some length checks during OGM processing in batman-adv, from Sven Eckelmann. 2) Fix regression that caused netfilter conntrack sysctls to not be per-netns any more. From Florian Westphal. 3) Use after free in netpoll, from Feng Sun. 4) Guard destruction of pfifo_fast per-cpu qdisc stats with qdisc_is_percpu_stats(), from Davide Caratti. Similar bug is fixed in pfifo_fast_enqueue(). 5) Fix memory leak in mld_del_delrec(), from Eric Dumazet. 6) Handle neigh events on internal ports correctly in nfp, from John Hurley. 7) Clear SKB timestamp in NF flow table code so that it does not confuse fq scheduler. From Florian Westphal. 8) taprio destroy can crash if it is invoked in a failure path of taprio_init(), because the list head isn't setup properly yet and the list del is unconditional. Perform the list add earlier to address this. From Vladimir Oltean. 9) Make sure to reapply vlan filters on device up, in aquantia driver. From Dmitry Bogdanov. 10) sgiseeq driver releases DMA memory using free_page() instead of dma_free_attrs(). From Christophe JAILLET. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits) net: seeq: Fix the function used to release some memory in an error handling path enetc: Add missing call to 'pci_free_irq_vectors()' in probe and remove functions net: bcmgenet: use ethtool_op_get_ts_info() tc-testing: don't hardcode 'ip' in nsPlugin.py net: dsa: microchip: add KSZ8563 compatibility string dt-bindings: net: dsa: document additional Microchip KSZ8563 switch net: aquantia: fix out of memory condition on rx side net: aquantia: linkstate irq should be oneshot net: aquantia: reapply vlan filters on up net: aquantia: fix limit of vlan filters net: aquantia: fix removal of vlan 0 net/sched: cbs: Set default link speed to 10 Mbps in cbs_set_port_rate taprio: Set default link speed to 10 Mbps in taprio_set_picos_per_byte taprio: Fix kernel panic in taprio_destroy net: dsa: microchip: fill regmap_config name rxrpc: Fix lack of conn cleanup when local endpoint is cleaned up [ver #2] net: stmmac: dwmac-rk: Don't fail if phy regulator is absent amd-xgbe: Fix error path in xgbe_mod_init() netfilter: nft_meta_bridge: Fix get NFT_META_BRI_IIFVPROTO in network byteorder mac80211: Correctly set noencrypt for PAE frames ...

When a cpu requests broadcasting, before starting the tick broadcast hrtimer, bc_set_next() checks if the timer callback (bc_handler) is active using hrtimer_try_to_cancel(). But hrtimer_try_to_cancel() does not provide the required synchronization when the callback is active on other core. The callback could have already executed tick_handle_oneshot_broadcast() and could have also returned. But still there is a small time window where the hrtimer_try_to_cancel() returns -1. In that case bc_set_next() returns without doing anything, but the next_event of the tick broadcast clock device is already set to a timeout value. In the race condition diagram below, CPU #1 is running the timer callback and CPU #2 is entering idle state and so calls bc_set_next(). In the worst case, the next_event will contain an expiry time, but the hrtimer will not be started which happens when the racing callback returns HRTIMER_NORESTART. The hrtimer might never recover if all further requests from the CPUs to subscribe to tick broadcast have timeout greater than the next_event of tick broadcast clock device. This leads to cascading of failures and finally noticed as rcu stall warnings Here is a depiction of the race condition CPU #1 (Running timer callback) CPU #2 (Enter idle and subscribe to tick broadcast) --------------------- --------------------- __run_hrtimer() tick_broadcast_enter() bc_handler() __tick_broadcast_oneshot_control() tick_handle_oneshot_broadcast() raw_spin_lock(&tick_broadcast_lock); dev->next_event = KTIME_MAX; //wait for tick_broadcast_lock //next_event for tick broadcast clock set to KTIME_MAX since no other cores subscribed to tick broadcasting raw_spin_unlock(&tick_broadcast_lock); if (dev->next_event == KTIME_MAX) return HRTIMER_NORESTART // callback function exits without restarting the hrtimer //tick_broadcast_lock acquired raw_spin_lock(&tick_broadcast_lock); tick_broadcast_set_event() clockevents_program_event() dev->next_event = expires; bc_set_next() hrtimer_try_to_cancel() //returns -1 since the timer callback is active. Exits without restarting the timer cpu_base->running = NULL; The comment that hrtimer cannot be armed from within the callback is wrong. It is fine to start the hrtimer from within the callback. Also it is safe to start the hrtimer from the enter/exit idle code while the broadcast handler is active. The enter/exit idle code and the broadcast handler are synchronized using tick_broadcast_lock. So there is no need for the existing try to cancel logic. All this can be removed which will eliminate the race condition as well. Fixes: 5d1638a ("tick: Introduce hrtimer based broadcast") Originally-by: Thomas Gleixner <[email protected]> Signed-off-by: Balasubramani Vivekanandan <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]

This patch fixes the lock inversion complaint: ============================================ WARNING: possible recursive locking detected 5.3.0-rc7-dbg+ #1 Not tainted -------------------------------------------- kworker/u16:6/171 is trying to acquire lock: 00000000035c6e6c (&id_priv->handler_mutex){+.+.}, at: rdma_destroy_id+0x78/0x4a0 [rdma_cm] but task is already holding lock: 00000000bc7c307d (&id_priv->handler_mutex){+.+.}, at: iw_conn_req_handler+0x151/0x680 [rdma_cm] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&id_priv->handler_mutex); lock(&id_priv->handler_mutex); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by kworker/u16:6/171: #0: 00000000e2eaa773 ((wq_completion)iw_cm_wq){+.+.}, at: process_one_work+0x472/0xac0 #1: 000000001efd357b ((work_completion)(&work->work)#3){+.+.}, at: process_one_work+0x476/0xac0 #2: 00000000bc7c307d (&id_priv->handler_mutex){+.+.}, at: iw_conn_req_handler+0x151/0x680 [rdma_cm] stack backtrace: CPU: 3 PID: 171 Comm: kworker/u16:6 Not tainted 5.3.0-rc7-dbg+ #1 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Workqueue: iw_cm_wq cm_work_handler [iw_cm] Call Trace: dump_stack+0x8a/0xd6 __lock_acquire.cold+0xe1/0x24d lock_acquire+0x106/0x240 __mutex_lock+0x12e/0xcb0 mutex_lock_nested+0x1f/0x30 rdma_destroy_id+0x78/0x4a0 [rdma_cm] iw_conn_req_handler+0x5c9/0x680 [rdma_cm] cm_work_handler+0xe62/0x1100 [iw_cm] process_one_work+0x56d/0xac0 worker_thread+0x7a/0x5d0 kthread+0x1bc/0x210 ret_from_fork+0x24/0x30 This is not a bug as there are actually two lock classes here. Link: https://lore.kernel.org/r/[email protected] Fixes: de910bd ("RDMA/cma: Simplify locking needed for serialization of callbacks") Signed-off-by: Bart Van Assche <[email protected]> Reviewed-by: Jason Gunthorpe <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>

A user reported a lockdep splat ====================================================== WARNING: possible circular locking dependency detected 5.2.11-gentoo #2 Not tainted ------------------------------------------------------ kswapd0/711 is trying to acquire lock: 000000007777a663 (sb_internal){.+.+}, at: start_transaction+0x3a8/0x500 but task is already holding lock: 000000000ba86300 (fs_reclaim){+.+.}, at: __fs_reclaim_acquire+0x0/0x30 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (fs_reclaim){+.+.}: kmem_cache_alloc+0x1f/0x1c0 btrfs_alloc_inode+0x1f/0x260 alloc_inode+0x16/0xa0 new_inode+0xe/0xb0 btrfs_new_inode+0x70/0x610 btrfs_symlink+0xd0/0x420 vfs_symlink+0x9c/0x100 do_symlinkat+0x66/0xe0 do_syscall_64+0x55/0x1c0 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #0 (sb_internal){.+.+}: __sb_start_write+0xf6/0x150 start_transaction+0x3a8/0x500 btrfs_commit_inode_delayed_inode+0x59/0x110 btrfs_evict_inode+0x19e/0x4c0 evict+0xbc/0x1f0 inode_lru_isolate+0x113/0x190 __list_lru_walk_one.isra.4+0x5c/0x100 list_lru_walk_one+0x32/0x50 prune_icache_sb+0x36/0x80 super_cache_scan+0x14a/0x1d0 do_shrink_slab+0x131/0x320 shrink_node+0xf7/0x380 balance_pgdat+0x2d5/0x640 kswapd+0x2ba/0x5e0 kthread+0x147/0x160 ret_from_fork+0x24/0x30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(fs_reclaim); lock(sb_internal); lock(fs_reclaim); lock(sb_internal); *** DEADLOCK *** 3 locks held by kswapd0/711: #0: 000000000ba86300 (fs_reclaim){+.+.}, at: __fs_reclaim_acquire+0x0/0x30 #1: 000000004a5100f8 (shrinker_rwsem){++++}, at: shrink_node+0x9a/0x380 #2: 00000000f956fa46 (&type->s_umount_key#30){++++}, at: super_cache_scan+0x35/0x1d0 stack backtrace: CPU: 7 PID: 711 Comm: kswapd0 Not tainted 5.2.11-gentoo #2 Hardware name: Dell Inc. Precision Tower 3620/0MWYPT, BIOS 2.4.2 09/29/2017 Call Trace: dump_stack+0x85/0xc7 print_circular_bug.cold.40+0x1d9/0x235 __lock_acquire+0x18b1/0x1f00 lock_acquire+0xa6/0x170 ? start_transaction+0x3a8/0x500 __sb_start_write+0xf6/0x150 ? start_transaction+0x3a8/0x500 start_transaction+0x3a8/0x500 btrfs_commit_inode_delayed_inode+0x59/0x110 btrfs_evict_inode+0x19e/0x4c0 ? var_wake_function+0x20/0x20 evict+0xbc/0x1f0 inode_lru_isolate+0x113/0x190 ? discard_new_inode+0xc0/0xc0 __list_lru_walk_one.isra.4+0x5c/0x100 ? discard_new_inode+0xc0/0xc0 list_lru_walk_one+0x32/0x50 prune_icache_sb+0x36/0x80 super_cache_scan+0x14a/0x1d0 do_shrink_slab+0x131/0x320 shrink_node+0xf7/0x380 balance_pgdat+0x2d5/0x640 kswapd+0x2ba/0x5e0 ? __wake_up_common_lock+0x90/0x90 kthread+0x147/0x160 ? balance_pgdat+0x640/0x640 ? __kthread_create_on_node+0x160/0x160 ret_from_fork+0x24/0x30 This is because btrfs_new_inode() calls new_inode() under the transaction. We could probably move the new_inode() outside of this but for now just wrap it in memalloc_nofs_save(). Reported-by: Zdenek Sojka <[email protected]> Fixes: 712e36c ("btrfs: use GFP_KERNEL in btrfs_alloc_inode") CC: [email protected] # 4.16+ Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Josef Bacik <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>

On excessive bit errors for the FCP channel ingress fibre path, the channel notifies us. Previously, we only emitted a kernel message and a trace record. Since performance can become suboptimal with I/O timeouts due to bit errors, we now stop using an FCP device by default on channel notification so multipath on top can timely failover to other paths. A new module parameter zfcp.ber_stop can be used to get zfcp old behavior. User explanation of new kernel message: * Description: * The FCP channel reported that its bit error threshold has been exceeded. * These errors might result from a problem with the physical components * of the local fibre link into the FCP channel. * The problem might be damage or malfunction of the cable or * cable connection between the FCP channel and * the adjacent fabric switch port or the point-to-point peer. * Find details about the errors in the HBA trace for the FCP device. * The zfcp device driver closed down the FCP device * to limit the performance impact from possible I/O command timeouts. * User action: * Check for problems on the local fibre link, ensure that fibre optics are * clean and functional, and all cables are properly plugged. * After the repair action, you can manually recover the FCP device by * writing "0" into its "failed" sysfs attribute. * If recovery through sysfs is not possible, set the CHPID of the device * offline and back online on the service element. Fixes: 1da177e ("Linux-2.6.12-rc2") Cc: <[email protected]> #2.6.30+ Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Jens Remus <[email protected]> Reviewed-by: Benjamin Block <[email protected]> Signed-off-by: Steffen Maier <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>

A long time ago we fixed a similar deadlock in show_slab_objects() [1]. However, it is apparently due to the commits like 01fb58b ("slab: remove synchronous synchronize_sched() from memcg cache deactivation path") and 03afc0e ("slab: get_online_mems for kmem_cache_{create,destroy,shrink}"), this kind of deadlock is back by just reading files in /sys/kernel/slab which will generate a lockdep splat below. Since the "mem_hotplug_lock" here is only to obtain a stable online node mask while racing with NUMA node hotplug, in the worst case, the results may me miscalculated while doing NUMA node hotplug, but they shall be corrected by later reads of the same files. WARNING: possible circular locking dependency detected ------------------------------------------------------ cat/5224 is trying to acquire lock: ffff900012ac3120 (mem_hotplug_lock.rw_sem){++++}, at: show_slab_objects+0x94/0x3a8 but task is already holding lock: b8ff009693eee398 (kn->count#45){++++}, at: kernfs_seq_start+0x44/0xf0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (kn->count#45){++++}: lock_acquire+0x31c/0x360 __kernfs_remove+0x290/0x490 kernfs_remove+0x30/0x44 sysfs_remove_dir+0x70/0x88 kobject_del+0x50/0xb0 sysfs_slab_unlink+0x2c/0x38 shutdown_cache+0xa0/0xf0 kmemcg_cache_shutdown_fn+0x1c/0x34 kmemcg_workfn+0x44/0x64 process_one_work+0x4f4/0x950 worker_thread+0x390/0x4bc kthread+0x1cc/0x1e8 ret_from_fork+0x10/0x18 -> #1 (slab_mutex){+.+.}: lock_acquire+0x31c/0x360 __mutex_lock_common+0x16c/0xf78 mutex_lock_nested+0x40/0x50 memcg_create_kmem_cache+0x38/0x16c memcg_kmem_cache_create_func+0x3c/0x70 process_one_work+0x4f4/0x950 worker_thread+0x390/0x4bc kthread+0x1cc/0x1e8 ret_from_fork+0x10/0x18 -> #0 (mem_hotplug_lock.rw_sem){++++}: validate_chain+0xd10/0x2bcc __lock_acquire+0x7f4/0xb8c lock_acquire+0x31c/0x360 get_online_mems+0x54/0x150 show_slab_objects+0x94/0x3a8 total_objects_show+0x28/0x34 slab_attr_show+0x38/0x54 sysfs_kf_seq_show+0x198/0x2d4 kernfs_seq_show+0xa4/0xcc seq_read+0x30c/0x8a8 kernfs_fop_read+0xa8/0x314 __vfs_read+0x88/0x20c vfs_read+0xd8/0x10c ksys_read+0xb0/0x120 __arm64_sys_read+0x54/0x88 el0_svc_handler+0x170/0x240 el0_svc+0x8/0xc other info that might help us debug this: Chain exists of: mem_hotplug_lock.rw_sem --> slab_mutex --> kn->count#45 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(kn->count#45); lock(slab_mutex); lock(kn->count#45); lock(mem_hotplug_lock.rw_sem); *** DEADLOCK *** 3 locks held by cat/5224: #0: 9eff00095b14b2a0 (&p->lock){+.+.}, at: seq_read+0x4c/0x8a8 #1: 0eff008997041480 (&of->mutex){+.+.}, at: kernfs_seq_start+0x34/0xf0 #2: b8ff009693eee398 (kn->count#45){++++}, at: kernfs_seq_start+0x44/0xf0 stack backtrace: Call trace: dump_backtrace+0x0/0x248 show_stack+0x20/0x2c dump_stack+0xd0/0x140 print_circular_bug+0x368/0x380 check_noncircular+0x248/0x250 validate_chain+0xd10/0x2bcc __lock_acquire+0x7f4/0xb8c lock_acquire+0x31c/0x360 get_online_mems+0x54/0x150 show_slab_objects+0x94/0x3a8 total_objects_show+0x28/0x34 slab_attr_show+0x38/0x54 sysfs_kf_seq_show+0x198/0x2d4 kernfs_seq_show+0xa4/0xcc seq_read+0x30c/0x8a8 kernfs_fop_read+0xa8/0x314 __vfs_read+0x88/0x20c vfs_read+0xd8/0x10c ksys_read+0xb0/0x120 __arm64_sys_read+0x54/0x88 el0_svc_handler+0x170/0x240 el0_svc+0x8/0xc I think it is important to mention that this doesn't expose the show_slab_objects to use-after-free. There is only a single path that might really race here and that is the slab hotplug notifier callback __kmem_cache_shrink (via slab_mem_going_offline_callback) but that path doesn't really destroy kmem_cache_node data structures. [1] http://lkml.iu.edu/hypermail/linux/kernel/1101.0/02850.html [[email protected]: add comment explaining why we don't need mem_hotplug_lock] Link: http://lkml.kernel.org/r/[email protected] Fixes: 01fb58b ("slab: remove synchronous synchronize_sched() from memcg cache deactivation path") Fixes: 03afc0e ("slab: get_online_mems for kmem_cache_{create,destroy,shrink}") Signed-off-by: Qian Cai <[email protected]> Acked-by: Michal Hocko <[email protected]> Cc: Christoph Lameter <[email protected]> Cc: Pekka Enberg <[email protected]> Cc: David Rientjes <[email protected]> Cc: Joonsoo Kim <[email protected]> Cc: Tejun Heo <[email protected]> Cc: Vladimir Davydov <[email protected]> Cc: Roman Gushchin <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>

Daniel Vetter uncovered a nasty cycle in using the mmu-notifiers to invalidate userptr objects which also happen to be pulled into GGTT mmaps. That is when we unbind the userptr object (on mmu invalidation), we revoke all CPU mmaps, which may then recurse into mmu invalidation. We looked for ways of breaking the cycle, but the revocation on invalidation is required and cannot be avoided. The only solution we could see was to not allow such GGTT bindings of userptr objects in the first place. In practice, no one really wants to use a GGTT mmapping of a CPU pointer... Just before Daniel's explosive lockdep patches land in v5.4-rc1, we got a genuine blip from CI: <4>[ 246.793958] ====================================================== <4>[ 246.793972] WARNING: possible circular locking dependency detected <4>[ 246.793989] 5.3.0-gbd6c56f50d15-drmtip_372+ #1 Tainted: G U <4>[ 246.794003] ------------------------------------------------------ <4>[ 246.794017] kswapd0/145 is trying to acquire lock: <4>[ 246.794030] 000000003f565be6 (&dev->struct_mutex/1){+.+.}, at: userptr_mn_invalidate_range_start+0x18f/0x220 [i915] <4>[ 246.794250] but task is already holding lock: <4>[ 246.794263] 000000001799cef9 (&anon_vma->rwsem){++++}, at: page_lock_anon_vma_read+0xe6/0x2a0 <4>[ 246.794291] which lock already depends on the new lock. <4>[ 246.794307] the existing dependency chain (in reverse order) is: <4>[ 246.794322] -> #3 (&anon_vma->rwsem){++++}: <4>[ 246.794344] down_write+0x33/0x70 <4>[ 246.794357] __vma_adjust+0x3d9/0x7b0 <4>[ 246.794370] __split_vma+0x16a/0x180 <4>[ 246.794385] mprotect_fixup+0x2a5/0x320 <4>[ 246.794399] do_mprotect_pkey+0x208/0x2e0 <4>[ 246.794413] __x64_sys_mprotect+0x16/0x20 <4>[ 246.794429] do_syscall_64+0x55/0x1c0 <4>[ 246.794443] entry_SYSCALL_64_after_hwframe+0x49/0xbe <4>[ 246.794456] -> #2 (&mapping->i_mmap_rwsem){++++}: <4>[ 246.794478] down_write+0x33/0x70 <4>[ 246.794493] unmap_mapping_pages+0x48/0x130 <4>[ 246.794519] i915_vma_revoke_mmap+0x81/0x1b0 [i915] <4>[ 246.794519] i915_vma_unbind+0x11d/0x4a0 [i915] <4>[ 246.794519] i915_vma_destroy+0x31/0x300 [i915] <4>[ 246.794519] __i915_gem_free_objects+0xb8/0x4b0 [i915] <4>[ 246.794519] drm_file_free.part.0+0x1e6/0x290 <4>[ 246.794519] drm_release+0xa6/0xe0 <4>[ 246.794519] __fput+0xc2/0x250 <4>[ 246.794519] task_work_run+0x82/0xb0 <4>[ 246.794519] do_exit+0x35b/0xdb0 <4>[ 246.794519] do_group_exit+0x34/0xb0 <4>[ 246.794519] __x64_sys_exit_group+0xf/0x10 <4>[ 246.794519] do_syscall_64+0x55/0x1c0 <4>[ 246.794519] entry_SYSCALL_64_after_hwframe+0x49/0xbe <4>[ 246.794519] -> #1 (&vm->mutex){+.+.}: <4>[ 246.794519] i915_gem_shrinker_taints_mutex+0x6d/0xe0 [i915] <4>[ 246.794519] i915_address_space_init+0x9f/0x160 [i915] <4>[ 246.794519] i915_ggtt_init_hw+0x55/0x170 [i915] <4>[ 246.794519] i915_driver_probe+0xc9f/0x1620 [i915] <4>[ 246.794519] i915_pci_probe+0x43/0x1b0 [i915] <4>[ 246.794519] pci_device_probe+0x9e/0x120 <4>[ 246.794519] really_probe+0xea/0x3d0 <4>[ 246.794519] driver_probe_device+0x10b/0x120 <4>[ 246.794519] device_driver_attach+0x4a/0x50 <4>[ 246.794519] __driver_attach+0x97/0x130 <4>[ 246.794519] bus_for_each_dev+0x74/0xc0 <4>[ 246.794519] bus_add_driver+0x13f/0x210 <4>[ 246.794519] driver_register+0x56/0xe0 <4>[ 246.794519] do_one_initcall+0x58/0x300 <4>[ 246.794519] do_init_module+0x56/0x1f6 <4>[ 246.794519] load_module+0x25bd/0x2a40 <4>[ 246.794519] __se_sys_finit_module+0xd3/0xf0 <4>[ 246.794519] do_syscall_64+0x55/0x1c0 <4>[ 246.794519] entry_SYSCALL_64_after_hwframe+0x49/0xbe <4>[ 246.794519] -> #0 (&dev->struct_mutex/1){+.+.}: <4>[ 246.794519] __lock_acquire+0x15d8/0x1e90 <4>[ 246.794519] lock_acquire+0xa6/0x1c0 <4>[ 246.794519] __mutex_lock+0x9d/0x9b0 <4>[ 246.794519] userptr_mn_invalidate_range_start+0x18f/0x220 [i915] <4>[ 246.794519] __mmu_notifier_invalidate_range_start+0x85/0x110 <4>[ 246.794519] try_to_unmap_one+0x76b/0x860 <4>[ 246.794519] rmap_walk_anon+0x104/0x280 <4>[ 246.794519] try_to_unmap+0xc0/0xf0 <4>[ 246.794519] shrink_page_list+0x561/0xc10 <4>[ 246.794519] shrink_inactive_list+0x220/0x440 <4>[ 246.794519] shrink_node_memcg+0x36e/0x740 <4>[ 246.794519] shrink_node+0xcb/0x490 <4>[ 246.794519] balance_pgdat+0x241/0x580 <4>[ 246.794519] kswapd+0x16c/0x530 <4>[ 246.794519] kthread+0x119/0x130 <4>[ 246.794519] ret_from_fork+0x24/0x50 <4>[ 246.794519] other info that might help us debug this: <4>[ 246.794519] Chain exists of: &dev->struct_mutex/1 --> &mapping->i_mmap_rwsem --> &anon_vma->rwsem <4>[ 246.794519] Possible unsafe locking scenario: <4>[ 246.794519] CPU0 CPU1 <4>[ 246.794519] ---- ---- <4>[ 246.794519] lock(&anon_vma->rwsem); <4>[ 246.794519] lock(&mapping->i_mmap_rwsem); <4>[ 246.794519] lock(&anon_vma->rwsem); <4>[ 246.794519] lock(&dev->struct_mutex/1); <4>[ 246.794519] *** DEADLOCK *** v2: Say no to mmap_ioctl Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111744 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111870 Signed-off-by: Chris Wilson <[email protected]> Cc: Tvrtko Ursulin <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: [email protected] Reviewed-by: Tvrtko Ursulin <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit a431174) Signed-off-by: Rodrigo Vivi <[email protected]>

…kernel/git/kvmarm/kvmarm into HEAD KVM/arm fixes for 5.4, take #2 Special PMU edition: - Fix cycle counter truncation - Fix cycle counter overflow limit on pure 64bit system - Allow chained events to be actually functional - Correct sample period after overflow

When lockdep is enabled, plugging Thunderbolt dock on Dominik's laptop triggers following splat: ====================================================== WARNING: possible circular locking dependency detected 5.3.0-rc6+ #1 Tainted: G T ------------------------------------------------------ pool-/usr/lib/b/1258 is trying to acquire lock: 000000005ab0ad43 (pci_rescan_remove_lock){+.+.}, at: authorized_store+0xe8/0x210 but task is already holding lock: 00000000bfb796b5 (&tb->lock){+.+.}, at: authorized_store+0x7c/0x210 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&tb->lock){+.+.}: __mutex_lock+0xac/0x9a0 tb_domain_add+0x2d/0x130 nhi_probe+0x1dd/0x330 pci_device_probe+0xd2/0x150 really_probe+0xee/0x280 driver_probe_device+0x50/0xc0 bus_for_each_drv+0x84/0xd0 __device_attach+0xe4/0x150 pci_bus_add_device+0x4e/0x70 pci_bus_add_devices+0x2e/0x66 pci_bus_add_devices+0x59/0x66 pci_bus_add_devices+0x59/0x66 enable_slot+0x344/0x450 acpiphp_check_bridge.part.0+0x119/0x150 acpiphp_hotplug_notify+0xaa/0x140 acpi_device_hotplug+0xa2/0x3f0 acpi_hotplug_work_fn+0x1a/0x30 process_one_work+0x234/0x580 worker_thread+0x50/0x3b0 kthread+0x10a/0x140 ret_from_fork+0x3a/0x50 -> #0 (pci_rescan_remove_lock){+.+.}: __lock_acquire+0xe54/0x1ac0 lock_acquire+0xb8/0x1b0 __mutex_lock+0xac/0x9a0 authorized_store+0xe8/0x210 kernfs_fop_write+0x125/0x1b0 vfs_write+0xc2/0x1d0 ksys_write+0x6c/0xf0 do_syscall_64+0x50/0x180 entry_SYSCALL_64_after_hwframe+0x49/0xbe other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&tb->lock); lock(pci_rescan_remove_lock); lock(&tb->lock); lock(pci_rescan_remove_lock); *** DEADLOCK *** 5 locks held by pool-/usr/lib/b/1258: #0: 000000003df1a1ad (&f->f_pos_lock){+.+.}, at: __fdget_pos+0x4d/0x60 #1: 0000000095a40b02 (sb_writers#6){.+.+}, at: vfs_write+0x185/0x1d0 #2: 0000000017a7d714 (&of->mutex){+.+.}, at: kernfs_fop_write+0xf2/0x1b0 #3: 000000004f262981 (kn->count#208){.+.+}, at: kernfs_fop_write+0xfa/0x1b0 #4: 00000000bfb796b5 (&tb->lock){+.+.}, at: authorized_store+0x7c/0x210 stack backtrace: CPU: 0 PID: 1258 Comm: pool-/usr/lib/b Tainted: G T 5.3.0-rc6+ #1 On an system using ACPI hotplug the host router gets hotplugged first and then the firmware starts sending notifications about connected devices so the above scenario should not happen in reality. However, after taking a second look at commit a03e828 ("thunderbolt: Serialize PCIe tunnel creation with PCI rescan") that introduced the locking, I don't think it is actually correct. It may have cured the symptom but probably the real root cause was somewhere closer to PCI stack and possibly is already fixed with recent kernels. I also tried to reproduce the original issue with the commit reverted but could not. So to keep lockdep happy and the code bit less complex drop calls to pci_lock_rescan_remove()/pci_unlock_rescan_remove() in tb_switch_set_authorized() effectively reverting a03e828. Link: https://lkml.org/lkml/2019/8/30/513 Fixes: a03e828 ("thunderbolt: Serialize PCIe tunnel creation with PCI rescan") Reported-by: Dominik Brodowski <[email protected]> Signed-off-by: Mika Westerberg <[email protected]>

Original version of g920_get_config() contained two kind of actions: 1. Device specific communication to query/set some parameters which requires active communication channel with the device, or, put in other way, for the call to be sandwiched between hid_device_io_start() and hid_device_io_stop(). 2. Input subsystem specific FF controller initialization which, in order to access a valid 'struct hid_input' via 'hid->inputs.next', requires claimed hidinput which means be executed after the call to hid_hw_start() with connect_mask containing HID_CONNECT_HIDINPUT. Location of g920_get_config() can only fulfill requirements for #1 and not #2, which might result in following backtrace: [ 88.312258] logitech-hidpp-device 0003:046D:C262.0005: HID++ 4.2 device connected. [ 88.320298] BUG: kernel NULL pointer dereference, address: 0000000000000018 [ 88.320304] #PF: supervisor read access in kernel mode [ 88.320307] #PF: error_code(0x0000) - not-present page [ 88.320309] PGD 0 P4D 0 [ 88.320315] Oops: 0000 [#1] SMP PTI [ 88.320320] CPU: 1 PID: 3080 Comm: systemd-udevd Not tainted 5.4.0-rc1+ thesofproject#31 [ 88.320322] Hardware name: Apple Inc. MacBookPro11,1/Mac-189A3D4F975D5FFC, BIOS 149.0.0.0.0 09/17/2018 [ 88.320334] RIP: 0010:hidpp_probe+0x61f/0x948 [hid_logitech_hidpp] [ 88.320338] Code: 81 00 00 48 89 ef e8 f0 d6 ff ff 41 89 c6 85 c0 75 b5 0f b6 44 24 28 48 8b 5d 00 88 44 24 1e 89 44 24 0c 48 8b 83 18 1c 00 00 <48> 8b 48 18 48 8b 83 10 19 00 00 48 8b 40 40 48 89 0c 24 0f b7 80 [ 88.320341] RSP: 0018:ffffb0a6824aba68 EFLAGS: 00010246 [ 88.320345] RAX: 0000000000000000 RBX: ffff93a50756e000 RCX: 0000000000010408 [ 88.320347] RDX: 0000000000000000 RSI: ffff93a51f0ad0a0 RDI: 000000000002d0a0 [ 88.320350] RBP: ffff93a50416da28 R08: ffff93a50416da70 R09: ffff93a50416da70 [ 88.320352] R10: 000000148ae9e60c R11: 00000000000f1525 R12: ffff93a50756e000 [ 88.320354] R13: ffff93a50756f8d0 R14: 0000000000000000 R15: ffff93a50756fc38 [ 88.320358] FS: 00007f8d8c1e0940(0000) GS:ffff93a51f080000(0000) knlGS:0000000000000000 [ 88.320361] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 88.320363] CR2: 0000000000000018 CR3: 00000003996d8003 CR4: 00000000001606e0 [ 88.320366] Call Trace: [ 88.320377] ? _cond_resched+0x15/0x30 [ 88.320387] ? create_pinctrl+0x2f/0x3c0 [ 88.320393] ? kernfs_link_sibling+0x94/0xe0 [ 88.320398] ? _cond_resched+0x15/0x30 [ 88.320402] ? kernfs_activate+0x5f/0x80 [ 88.320406] ? kernfs_add_one+0xe2/0x130 [ 88.320411] hid_device_probe+0x106/0x170 [ 88.320419] really_probe+0x147/0x3c0 [ 88.320424] driver_probe_device+0xb6/0x100 [ 88.320428] device_driver_attach+0x53/0x60 [ 88.320433] __driver_attach+0x8a/0x150 [ 88.320437] ? device_driver_attach+0x60/0x60 [ 88.320440] bus_for_each_dev+0x78/0xc0 [ 88.320445] bus_add_driver+0x14d/0x1f0 [ 88.320450] driver_register+0x6c/0xc0 [ 88.320453] ? 0xffffffffc0d67000 [ 88.320457] __hid_register_driver+0x4c/0x80 [ 88.320464] do_one_initcall+0x46/0x1f4 [ 88.320469] ? _cond_resched+0x15/0x30 [ 88.320474] ? kmem_cache_alloc_trace+0x162/0x220 [ 88.320481] ? do_init_module+0x23/0x230 [ 88.320486] do_init_module+0x5c/0x230 [ 88.320491] load_module+0x26e1/0x2990 [ 88.320502] ? ima_post_read_file+0xf0/0x100 [ 88.320508] ? __do_sys_finit_module+0xaa/0x110 [ 88.320512] __do_sys_finit_module+0xaa/0x110 [ 88.320520] do_syscall_64+0x5b/0x180 [ 88.320525] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 88.320528] RIP: 0033:0x7f8d8d1f01fd [ 88.320532] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 5b 8c 0c 00 f7 d8 64 89 01 48 [ 88.320535] RSP: 002b:00007ffefa3bb068 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 88.320539] RAX: ffffffffffffffda RBX: 000055922040cb40 RCX: 00007f8d8d1f01fd [ 88.320541] RDX: 0000000000000000 RSI: 00007f8d8ce4984d RDI: 0000000000000006 [ 88.320543] RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000007 [ 88.320545] R10: 0000000000000006 R11: 0000000000000246 R12: 00007f8d8ce4984d [ 88.320547] R13: 0000000000000000 R14: 000055922040efc0 R15: 000055922040cb40 [ 88.320551] Modules linked in: hid_logitech_hidpp(+) fuse rfcomm ccm xt_CHECKSUM xt_MASQUERADE bridge stp llc nf_nat_tftp nf_conntrack_tftp nf_conntrack_netbios_ns nf_conntrack_broadcast xt_CT ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ebtable_nat ip6table_nat ip6table_mangle ip6table_raw ip6table_security iptable_nat nf_nat tun iptable_mangle iptable_raw iptable_security nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c ip_set nfnetlink ebtable_filter ebtables ip6table_filter ip6_tables cmac bnep sunrpc dm_crypt nls_utf8 hfsplus intel_rapl_msr intel_rapl_common ath9k_htc ath9k_common x86_pkg_temp_thermal intel_powerclamp b43 ath9k_hw coretemp snd_hda_codec_hdmi cordic kvm_intel snd_hda_codec_cirrus mac80211 snd_hda_codec_generic ledtrig_audio kvm snd_hda_intel snd_intel_nhlt irqbypass snd_hda_codec btusb btrtl snd_hda_core ath btbcm ssb snd_hwdep btintel snd_seq crct10dif_pclmul iTCO_wdt snd_seq_device crc32_pclmul bluetooth mmc_core iTCO_vendor_support joydev cfg80211 [ 88.320602] applesmc ghash_clmulni_intel ecdh_generic snd_pcm input_polldev intel_cstate ecc intel_uncore thunderbolt snd_timer i2c_i801 libarc4 rfkill intel_rapl_perf lpc_ich mei_me pcspkr bcm5974 snd bcma mei soundcore acpi_als sbs kfifo_buf sbshc industrialio apple_bl i915 i2c_algo_bit drm_kms_helper drm uas crc32c_intel usb_storage video hid_apple [ 88.320630] CR2: 0000000000000018 [ 88.320633] ---[ end trace 933491c8a4fadeb7 ]--- [ 88.320642] RIP: 0010:hidpp_probe+0x61f/0x948 [hid_logitech_hidpp] [ 88.320645] Code: 81 00 00 48 89 ef e8 f0 d6 ff ff 41 89 c6 85 c0 75 b5 0f b6 44 24 28 48 8b 5d 00 88 44 24 1e 89 44 24 0c 48 8b 83 18 1c 00 00 <48> 8b 48 18 48 8b 83 10 19 00 00 48 8b 40 40 48 89 0c 24 0f b7 80 [ 88.320647] RSP: 0018:ffffb0a6824aba68 EFLAGS: 00010246 [ 88.320650] RAX: 0000000000000000 RBX: ffff93a50756e000 RCX: 0000000000010408 [ 88.320652] RDX: 0000000000000000 RSI: ffff93a51f0ad0a0 RDI: 000000000002d0a0 [ 88.320655] RBP: ffff93a50416da28 R08: ffff93a50416da70 R09: ffff93a50416da70 [ 88.320657] R10: 000000148ae9e60c R11: 00000000000f1525 R12: ffff93a50756e000 [ 88.320659] R13: ffff93a50756f8d0 R14: 0000000000000000 R15: ffff93a50756fc38 [ 88.320662] FS: 00007f8d8c1e0940(0000) GS:ffff93a51f080000(0000) knlGS:0000000000000000 [ 88.320664] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 88.320667] CR2: 0000000000000018 CR3: 00000003996d8003 CR4: 00000000001606e0 To solve this issue: 1. Split g920_get_config() such that all of the device specific communication remains a part of the function and input subsystem initialization bits go to hidpp_ff_init() 2. Move call to hidpp_ff_init() from being a part of g920_get_config() to be the last step of .probe(), right after a call to hid_hw_start() with connect_mask containing HID_CONNECT_HIDINPUT. Fixes: 91cf9a9 ("HID: logitech-hidpp: make .probe usbhid capable") Signed-off-by: Andrey Smirnov <[email protected]> Tested-by: Sam Bazley <[email protected]> Cc: Jiri Kosina <[email protected]> Cc: Benjamin Tissoires <[email protected]> Cc: Henrik Rydberg <[email protected]> Cc: Pierre-Loup A. Griffais <[email protected]> Cc: Austin Palmer <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] # 5.2+ Signed-off-by: Benjamin Tissoires <[email protected]>

All bonding device has same lockdep key and subclass is initialized with nest_level. But actual nest_level value can be changed when a lower device is attached. And at this moment, the subclass should be updated but it seems to be unsafe. So this patch makes bonding use dynamic lockdep key instead of the subclass. Test commands: ip link add bond0 type bond for i in {1..5} do let A=$i-1 ip link add bond$i type bond ip link set bond$i master bond$A done ip link set bond5 master bond0 Splat looks like: [ 307.992912] WARNING: possible recursive locking detected [ 307.993656] 5.4.0-rc3+ thesofproject#96 Tainted: G W [ 307.994367] -------------------------------------------- [ 307.995092] ip/761 is trying to acquire lock: [ 307.995710] ffff8880513aac60 (&(&bond->stats_lock)->rlock#2/2){+.+.}, at: bond_get_stats+0xb8/0x500 [bonding] [ 307.997045] but task is already holding lock: [ 307.997923] ffff88805fcbac60 (&(&bond->stats_lock)->rlock#2/2){+.+.}, at: bond_get_stats+0xb8/0x500 [bonding] [ 307.999215] other info that might help us debug this: [ 308.000251] Possible unsafe locking scenario: [ 308.001137] CPU0 [ 308.001533] ---- [ 308.001915] lock(&(&bond->stats_lock)->rlock#2/2); [ 308.002609] lock(&(&bond->stats_lock)->rlock#2/2); [ 308.003302] *** DEADLOCK *** [ 308.004310] May be due to missing lock nesting notation [ 308.005319] 3 locks held by ip/761: [ 308.005830] #0: ffffffff9fcc42b0 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x466/0x8a0 [ 308.006894] #1: ffff88805fcbac60 (&(&bond->stats_lock)->rlock#2/2){+.+.}, at: bond_get_stats+0xb8/0x500 [bonding] [ 308.008243] #2: ffffffff9f9219c0 (rcu_read_lock){....}, at: bond_get_stats+0x9f/0x500 [bonding] [ 308.009422] stack backtrace: [ 308.010124] CPU: 0 PID: 761 Comm: ip Tainted: G W 5.4.0-rc3+ thesofproject#96 [ 308.011097] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 308.012179] Call Trace: [ 308.012601] dump_stack+0x7c/0xbb [ 308.013089] __lock_acquire+0x269d/0x3de0 [ 308.013669] ? register_lock_class+0x14d0/0x14d0 [ 308.014318] lock_acquire+0x164/0x3b0 [ 308.014858] ? bond_get_stats+0xb8/0x500 [bonding] [ 308.015520] _raw_spin_lock_nested+0x2e/0x60 [ 308.016129] ? bond_get_stats+0xb8/0x500 [bonding] [ 308.017215] bond_get_stats+0xb8/0x500 [bonding] [ 308.018454] ? bond_arp_rcv+0xf10/0xf10 [bonding] [ 308.019710] ? rcu_read_lock_held+0x90/0xa0 [ 308.020605] ? rcu_read_lock_sched_held+0xc0/0xc0 [ 308.021286] ? bond_get_stats+0x9f/0x500 [bonding] [ 308.021953] dev_get_stats+0x1ec/0x270 [ 308.022508] bond_get_stats+0x1d1/0x500 [bonding] Fixes: d3fff6c ("net: add netdev_lockdep_set_classes() helper") Signed-off-by: Taehee Yoo <[email protected]> Signed-off-by: David S. Miller <[email protected]>

…nix_gc(). syzbot reported a lockdep splat regarding unix_gc_lock and unix_state_lock(). One is called from recvmsg() for a connected socket, and another is called from GC for TCP_LISTEN socket. So, the splat is false-positive. Let's add a dedicated lock class for the latter to suppress the splat. Note that this change is not necessary for net-next.git as the issue is only applied to the old GC impl. [0]: WARNING: possible circular locking dependency detected 6.9.0-rc5-syzkaller-00007-g4d2008430ce8 #0 Not tainted ----------------------------------------------------- kworker/u8:1/11 is trying to acquire lock: ffff88807cea4e70 (&u->lock){+.+.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] ffff88807cea4e70 (&u->lock){+.+.}-{2:2}, at: __unix_gc+0x40e/0xf70 net/unix/garbage.c:302 but task is already holding lock: ffffffff8f6ab638 (unix_gc_lock){+.+.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] ffffffff8f6ab638 (unix_gc_lock){+.+.}-{2:2}, at: __unix_gc+0x117/0xf70 net/unix/garbage.c:261 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (unix_gc_lock){+.+.}-{2:2}: lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754 __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline] _raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154 spin_lock include/linux/spinlock.h:351 [inline] unix_notinflight+0x13d/0x390 net/unix/garbage.c:140 unix_detach_fds net/unix/af_unix.c:1819 [inline] unix_destruct_scm+0x221/0x350 net/unix/af_unix.c:1876 skb_release_head_state+0x100/0x250 net/core/skbuff.c:1188 skb_release_all net/core/skbuff.c:1200 [inline] __kfree_skb net/core/skbuff.c:1216 [inline] kfree_skb_reason+0x16d/0x3b0 net/core/skbuff.c:1252 kfree_skb include/linux/skbuff.h:1262 [inline] manage_oob net/unix/af_unix.c:2672 [inline] unix_stream_read_generic+0x1125/0x2700 net/unix/af_unix.c:2749 unix_stream_splice_read+0x239/0x320 net/unix/af_unix.c:2981 do_splice_read fs/splice.c:985 [inline] splice_file_to_pipe+0x299/0x500 fs/splice.c:1295 do_splice+0xf2d/0x1880 fs/splice.c:1379 __do_splice fs/splice.c:1436 [inline] __do_sys_splice fs/splice.c:1652 [inline] __se_sys_splice+0x331/0x4a0 fs/splice.c:1634 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f -> #0 (&u->lock){+.+.}-{2:2}: check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain+0x18cb/0x58e0 kernel/locking/lockdep.c:3869 __lock_acquire+0x1346/0x1fd0 kernel/locking/lockdep.c:5137 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754 __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline] _raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154 spin_lock include/linux/spinlock.h:351 [inline] __unix_gc+0x40e/0xf70 net/unix/garbage.c:302 process_one_work kernel/workqueue.c:3254 [inline] process_scheduled_works+0xa10/0x17c0 kernel/workqueue.c:3335 worker_thread+0x86d/0xd70 kernel/workqueue.c:3416 kthread+0x2f0/0x390 kernel/kthread.c:388 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(unix_gc_lock); lock(&u->lock); lock(unix_gc_lock); lock(&u->lock); *** DEADLOCK *** 3 locks held by kworker/u8:1/11: #0: ffff888015089148 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work kernel/workqueue.c:3229 [inline] #0: ffff888015089148 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_scheduled_works+0x8e0/0x17c0 kernel/workqueue.c:3335 #1: ffffc90000107d00 (unix_gc_work){+.+.}-{0:0}, at: process_one_work kernel/workqueue.c:3230 [inline] #1: ffffc90000107d00 (unix_gc_work){+.+.}-{0:0}, at: process_scheduled_works+0x91b/0x17c0 kernel/workqueue.c:3335 #2: ffffffff8f6ab638 (unix_gc_lock){+.+.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] #2: ffffffff8f6ab638 (unix_gc_lock){+.+.}-{2:2}, at: __unix_gc+0x117/0xf70 net/unix/garbage.c:261 stack backtrace: CPU: 0 PID: 11 Comm: kworker/u8:1 Not tainted 6.9.0-rc5-syzkaller-00007-g4d2008430ce8 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Workqueue: events_unbound __unix_gc Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 check_noncircular+0x36a/0x4a0 kernel/locking/lockdep.c:2187 check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain+0x18cb/0x58e0 kernel/locking/lockdep.c:3869 __lock_acquire+0x1346/0x1fd0 kernel/locking/lockdep.c:5137 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754 __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline] _raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154 spin_lock include/linux/spinlock.h:351 [inline] __unix_gc+0x40e/0xf70 net/unix/garbage.c:302 process_one_work kernel/workqueue.c:3254 [inline] process_scheduled_works+0xa10/0x17c0 kernel/workqueue.c:3335 worker_thread+0x86d/0xd70 kernel/workqueue.c:3416 kthread+0x2f0/0x390 kernel/kthread.c:388 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Fixes: 47d8ac0 ("af_unix: Fix garbage collector racing against connect()") Reported-and-tested-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=fa379358c28cc87cc307 Signed-off-by: Kuniyuki Iwashima <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

…git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net The following patchset contains two Netfilter/IPVS fixes for net: Patch #1 fixes SCTP checksumming for IPVS with gso packets, from Ismael Luceno. Patch #2 honor dormant flag from netdev event path to fix a possible double hook unregistration. * tag 'nf-24-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: honor table dormant flag from netdev release event path ipvs: Fix checksumming on GSO of SCTP packets ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

Merge series from Jerome Brunet <[email protected]>: This patchset fixes 2 problems on TDM which both find a solution by properly implementing the .trigger() callback for the TDM backend. ATM, enabling the TDM formatters is done by the .prepare() callback because handling the formatter is slow due to necessary calls to CCF. The first problem affects the TDMIN. Because .prepare() is called on DPCM backend first, the formatter are started before the FIFOs and this may cause a random channel shifts if the TDMIN use multiple lanes with more than 2 slots per lanes. Using trigger() allows to set the FE/BE order, solving the problem. There has already been an attempt to fix this 3y ago [1] and reverted [2] It triggered a 'sleep in irq' error on the period IRQ. The solution is to just use the bottom half of threaded IRQ. This is patch #1. Patch #2 and #3 remain mostly the same as 3y ago. For TDMOUT, the problem is on pause. ATM pause only stops the FIFO and the TDMOUT just starves. When it does, it will actually repeat the last sample continuously. Depending on the platform, if there is no high-pass filter on the analog path, this may translate to a constant position of the speaker membrane. There is no audible glitch but it may damage the speaker coil. Properly stopping the TDMOUT in pause solves the problem. There is behaviour change associated with that fix. Clocks used to be continuous on pause because of the problem above. They will now be gated on pause by default, as they should. The last change introduce the proper support for continuous clocks, if needed. [1]: https://lore.kernel.org/linux-amlogic/[email protected] [2]: https://lore.kernel.org/linux-amlogic/[email protected]

…git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: Patch #1 syzbot reports that nf_reinject() could be called without rcu_read_lock() when flushing pending packets at nfnetlink queue removal, from Eric Dumazet. Patch #2 flushes ipset list:set when canceling garbage collection to reference to other lists to fix a race, from Jozsef Kadlecsik. Patch #3 restores q-in-q matching with nft_payload by reverting f6ae9f1 ("netfilter: nft_payload: add C-VLAN support"). Patch #4 fixes vlan mangling in skbuff when vlan offload is present in skbuff, without this patch nft_payload corrupts packets in this case. Patch thesofproject#5 fixes possible nul-deref in tproxy no IP address is found in netdevice, reported by syzbot and patch from Florian Westphal. Patch thesofproject#6 removes a superfluous restriction which prevents loose fib lookups from input and forward hooks, from Eric Garver. My assessment is that patches #1, #2 and thesofproject#5 address possible kernel crash, anything else in this batch fixes broken features. netfilter pull request 24-05-29 * tag 'nf-24-05-29' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nft_fib: allow from forward/input without iif selector netfilter: tproxy: bail out if IP has been disabled on the device netfilter: nft_payload: skbuff vlan metadata mangle support netfilter: nft_payload: restore vlan q-in-q match support netfilter: ipset: Add list flush to cancel_gc netfilter: nfnetlink_queue: acquire rcu_read_lock() in instance_destroy_rcu() ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>

With commit c4cb231 ("iommu/amd: Add support for enable/disable IOPF") we are hitting below issue. This happens because in IOPF enablement path it holds spin lock with irq disable and then tries to take mutex lock. dmesg: ----- [ 0.938739] ============================= [ 0.938740] [ BUG: Invalid wait context ] [ 0.938742] 6.10.0-rc1+ #1 Not tainted [ 0.938745] ----------------------------- [ 0.938746] swapper/0/1 is trying to lock: [ 0.938748] ffffffff8c9f01d8 (&port_lock_key){....}-{3:3}, at: serial8250_console_write+0x78/0x4a0 [ 0.938767] other info that might help us debug this: [ 0.938768] context-{5:5} [ 0.938769] 7 locks held by swapper/0/1: [ 0.938772] #0: ffff888101a91310 (&group->mutex){+.+.}-{4:4}, at: bus_iommu_probe+0x70/0x160 [ 0.938790] #1: ffff888101d1f1b8 (&domain->lock){....}-{3:3}, at: amd_iommu_attach_device+0xa5/0x700 [ 0.938799] #2: ffff888101cc3d18 (&dev_data->lock){....}-{3:3}, at: amd_iommu_attach_device+0xc5/0x700 [ 0.938806] #3: ffff888100052830 (&iommu->lock){....}-{2:2}, at: amd_iommu_iopf_add_device+0x3f/0xa0 [ 0.938813] #4: ffffffff8945a340 (console_lock){+.+.}-{0:0}, at: _printk+0x48/0x50 [ 0.938822] thesofproject#5: ffffffff8945a390 (console_srcu){....}-{0:0}, at: console_flush_all+0x58/0x4e0 [ 0.938867] thesofproject#6: ffffffff82459f80 (console_owner){....}-{0:0}, at: console_flush_all+0x1f0/0x4e0 [ 0.938872] stack backtrace: [ 0.938874] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 6.10.0-rc1+ #1 [ 0.938877] Hardware name: HP HP EliteBook 745 G3/807E, BIOS N73 Ver. 01.39 04/16/2019 Fix above issue by re-arranging code in attach device path: - move device PASID/IOPF enablement outside lock in AMD IOMMU driver. This is safe as core layer holds group->mutex lock before calling iommu_ops->attach_dev. Reported-by: Borislav Petkov <[email protected]> Reported-by: Mikhail Gavrilov <[email protected]> Reported-by: Chris Bainbridge <[email protected]> Fixes: c4cb231 ("iommu/amd: Add support for enable/disable IOPF") Tested-by: Borislav Petkov <[email protected]> Tested-by: Chris Bainbridge <[email protected]> Tested-by: Mikhail Gavrilov <[email protected]> Signed-off-by: Vasant Hegde <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]>

Synchronize the dev->driver usage in really_probe() and dev_uevent(). These can run in different threads, what can result in the following race condition for dev->driver uninitialization: Thread #1: ========== really_probe() { ... probe_failed: ... device_unbind_cleanup(dev) { ... dev->driver = NULL; // <= Failed probe sets dev->driver to NULL ... } ... } Thread #2: ========== dev_uevent() { ... if (dev->driver) // If dev->driver is NULLed from really_probe() from here on, // after above check, the system crashes add_uevent_var(env, "DRIVER=%s", dev->driver->name); ... } really_probe() holds the lock, already. So nothing needs to be done there. dev_uevent() is called with lock held, often, too. But not always. What implies that we can't add any locking in dev_uevent() itself. So fix this race by adding the lock to the non-protected path. This is the path where above race is observed: dev_uevent+0x235/0x380 uevent_show+0x10c/0x1f0 <= Add lock here dev_attr_show+0x3a/0xa0 sysfs_kf_seq_show+0x17c/0x250 kernfs_seq_show+0x7c/0x90 seq_read_iter+0x2d7/0x940 kernfs_fop_read_iter+0xc6/0x310 vfs_read+0x5bc/0x6b0 ksys_read+0xeb/0x1b0 __x64_sys_read+0x42/0x50 x64_sys_call+0x27ad/0x2d30 do_syscall_64+0xcd/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Similar cases are reported by syzkaller in https://syzkaller.appspot.com/bug?extid=ffa8143439596313a85a But these are regarding the *initialization* of dev->driver dev->driver = drv; As this switches dev->driver to non-NULL these reports can be considered to be false-positives (which should be "fixed" by this commit, as well, though). The same issue was reported and tried to be fixed back in 2015 in https://lore.kernel.org/lkml/[email protected]/ already. Fixes: 239378f ("Driver core: add uevent vars for devices of a class") Cc: stable <[email protected]> Cc: [email protected] Cc: Ashish Sangwan <[email protected]> Cc: Namjae Jeon <[email protected]> Signed-off-by: Dirk Behme <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

…PLES event" This reverts commit 7d1405c. This causes segfaults in some cases, as reported by Milian: ``` sudo /usr/bin/perf record -z --call-graph dwarf -e cycles -e raw_syscalls:sys_enter ls ... [ perf record: Woken up 3 times to write data ] malloc(): invalid next size (unsorted) Aborted ``` Backtrace with GDB + debuginfod: ``` malloc(): invalid next size (unsorted) Thread 1 "perf" received signal SIGABRT, Aborted. __pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6, no_tid=no_tid@entry=0) at pthread_kill.c:44 Downloading source file /usr/src/debug/glibc/glibc/nptl/pthread_kill.c 44 return INTERNAL_SYSCALL_ERROR_P (ret) ? INTERNAL_SYSCALL_ERRNO (ret) : 0; (gdb) bt #0 __pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6, no_tid=no_tid@entry=0) at pthread_kill.c:44 #1 0x00007ffff6ea8eb3 in __pthread_kill_internal (threadid=<optimized out>, signo=6) at pthread_kill.c:78 #2 0x00007ffff6e50a30 in __GI_raise (sig=sig@entry=6) at ../sysdeps/posix/ raise.c:26 #3 0x00007ffff6e384c3 in __GI_abort () at abort.c:79 #4 0x00007ffff6e39354 in __libc_message_impl (fmt=fmt@entry=0x7ffff6fc22ea "%s\n") at ../sysdeps/posix/libc_fatal.c:132 thesofproject#5 0x00007ffff6eb3085 in malloc_printerr (str=str@entry=0x7ffff6fc5850 "malloc(): invalid next size (unsorted)") at malloc.c:5772 thesofproject#6 0x00007ffff6eb657c in _int_malloc (av=av@entry=0x7ffff6ff6ac0 <main_arena>, bytes=bytes@entry=368) at malloc.c:4081 thesofproject#7 0x00007ffff6eb877e in __libc_calloc (n=<optimized out>, elem_size=<optimized out>) at malloc.c:3754 thesofproject#8 0x000055555569bdb6 in perf_session.do_write_header () thesofproject#9 0x00005555555a373a in __cmd_record.constprop.0 () thesofproject#10 0x00005555555a6846 in cmd_record () thesofproject#11 0x000055555564db7f in run_builtin () thesofproject#12 0x000055555558ed77 in main () ``` Valgrind memcheck: ``` ==45136== Invalid write of size 8 ==45136== at 0x2B38A5: perf_event__synthesize_id_sample (in /usr/bin/perf) ==45136== by 0x157069: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== Address 0x6a866a8 is 0 bytes after a block of size 40 alloc'd ==45136== at 0x4849BF3: calloc (vg_replace_malloc.c:1675) ==45136== by 0x3574AB: zalloc (in /usr/bin/perf) ==45136== by 0x1570E0: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== ==45136== Syscall param write(buf) points to unaddressable byte(s) ==45136== at 0x575953D: __libc_write (write.c:26) ==45136== by 0x575953D: write (write.c:24) ==45136== by 0x35761F: ion (in /usr/bin/perf) ==45136== by 0x357778: writen (in /usr/bin/perf) ==45136== by 0x1548F7: record__write (in /usr/bin/perf) ==45136== by 0x15708A: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== Address 0x6a866a8 is 0 bytes after a block of size 40 alloc'd ==45136== at 0x4849BF3: calloc (vg_replace_malloc.c:1675) ==45136== by 0x3574AB: zalloc (in /usr/bin/perf) ==45136== by 0x1570E0: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== ----- Closes: https://lore.kernel.org/linux-perf-users/23879991.0LEYPuXRzz@milian-workstation/ Reported-by: Milian Wolff <[email protected]> Tested-by: Milian Wolff <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: [email protected] # 6.8+ Link: https://lore.kernel.org/lkml/Zl9ksOlHJHnKM70p@x1 Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

We have been seeing crashes on duplicate keys in btrfs_set_item_key_safe(): BTRFS critical (device vdb): slot 4 key (450 108 8192) new key (450 108 8192) ------------[ cut here ]------------ kernel BUG at fs/btrfs/ctree.c:2620! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 3139 Comm: xfs_io Kdump: loaded Not tainted 6.9.0 thesofproject#6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:btrfs_set_item_key_safe+0x11f/0x290 [btrfs] With the following stack trace: #0 btrfs_set_item_key_safe (fs/btrfs/ctree.c:2620:4) #1 btrfs_drop_extents (fs/btrfs/file.c:411:4) #2 log_one_extent (fs/btrfs/tree-log.c:4732:9) #3 btrfs_log_changed_extents (fs/btrfs/tree-log.c:4955:9) #4 btrfs_log_inode (fs/btrfs/tree-log.c:6626:9) thesofproject#5 btrfs_log_inode_parent (fs/btrfs/tree-log.c:7070:8) thesofproject#6 btrfs_log_dentry_safe (fs/btrfs/tree-log.c:7171:8) thesofproject#7 btrfs_sync_file (fs/btrfs/file.c:1933:8) thesofproject#8 vfs_fsync_range (fs/sync.c:188:9) thesofproject#9 vfs_fsync (fs/sync.c:202:9) thesofproject#10 do_fsync (fs/sync.c:212:9) thesofproject#11 __do_sys_fdatasync (fs/sync.c:225:9) thesofproject#12 __se_sys_fdatasync (fs/sync.c:223:1) thesofproject#13 __x64_sys_fdatasync (fs/sync.c:223:1) thesofproject#14 do_syscall_x64 (arch/x86/entry/common.c:52:14) thesofproject#15 do_syscall_64 (arch/x86/entry/common.c:83:7) thesofproject#16 entry_SYSCALL_64+0xaf/0x14c (arch/x86/entry/entry_64.S:121) So we're logging a changed extent from fsync, which is splitting an extent in the log tree. But this split part already exists in the tree, triggering the BUG(). This is the state of the log tree at the time of the crash, dumped with drgn (https://github.com/osandov/drgn/blob/main/contrib/btrfs_tree.py) to get more details than btrfs_print_leaf() gives us: >>> print_extent_buffer(prog.crashed_thread().stack_trace()[0]["eb"]) leaf 33439744 level 0 items 72 generation 9 owner 18446744073709551610 leaf 33439744 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da item 0 key (450 INODE_ITEM 0) itemoff 16123 itemsize 160 generation 7 transid 9 size 8192 nbytes 8473563889606862198 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 204 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417704.983333333 (2024-05-22 15:41:44) mtime 1716417704.983333333 (2024-05-22 15:41:44) otime 17592186044416.000000000 (559444-03-08 01:40:16) item 1 key (450 INODE_REF 256) itemoff 16110 itemsize 13 index 195 namelen 3 name: 193 item 2 key (450 XATTR_ITEM 1640047104) itemoff 16073 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 3 key (450 EXTENT_DATA 0) itemoff 16020 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 4096 ram 12288 extent compression 0 (none) item 4 key (450 EXTENT_DATA 4096) itemoff 15967 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 4096 nr 8192 item 5 key (450 EXTENT_DATA 8192) itemoff 15914 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 ... So the real problem happened earlier: notice that items 4 (4k-12k) and 5 (8k-12k) overlap. Both are prealloc extents. Item 4 straddles i_size and item 5 starts at i_size. Here is the state of the filesystem tree at the time of the crash: >>> root = prog.crashed_thread().stack_trace()[2]["inode"].root >>> ret, nodes, slots = btrfs_search_slot(root, BtrfsKey(450, 0, 0)) >>> print_extent_buffer(nodes[0]) leaf 30425088 level 0 items 184 generation 9 owner 5 leaf 30425088 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da ... item 179 key (450 INODE_ITEM 0) itemoff 4907 itemsize 160 generation 7 transid 7 size 4096 nbytes 12288 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 6 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417703.220000000 (2024-05-22 15:41:43) mtime 1716417703.220000000 (2024-05-22 15:41:43) otime 1716417703.220000000 (2024-05-22 15:41:43) item 180 key (450 INODE_REF 256) itemoff 4894 itemsize 13 index 195 namelen 3 name: 193 item 181 key (450 XATTR_ITEM 1640047104) itemoff 4857 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 182 key (450 EXTENT_DATA 0) itemoff 4804 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 8192 ram 12288 extent compression 0 (none) item 183 key (450 EXTENT_DATA 8192) itemoff 4751 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 Item 5 in the log tree corresponds to item 183 in the filesystem tree, but nothing matches item 4. Furthermore, item 183 is the last item in the leaf. btrfs_log_prealloc_extents() is responsible for logging prealloc extents beyond i_size. It first truncates any previously logged prealloc extents that start beyond i_size. Then, it walks the filesystem tree and copies the prealloc extent items to the log tree. If it hits the end of a leaf, then it calls btrfs_next_leaf(), which unlocks the tree and does another search. However, while the filesystem tree is unlocked, an ordered extent completion may modify the tree. In particular, it may insert an extent item that overlaps with an extent item that was already copied to the log tree. This may manifest in several ways depending on the exact scenario, including an EEXIST error that is silently translated to a full sync, overlapping items in the log tree, or this crash. This particular crash is triggered by the following sequence of events: - Initially, the file has i_size=4k, a regular extent from 0-4k, and a prealloc extent beyond i_size from 4k-12k. The prealloc extent item is the last item in its B-tree leaf. - The file is fsync'd, which copies its inode item and both extent items to the log tree. - An xattr is set on the file, which sets the BTRFS_INODE_COPY_EVERYTHING flag. - The range 4k-8k in the file is written using direct I/O. i_size is extended to 8k, but the ordered extent is still in flight. - The file is fsync'd. Since BTRFS_INODE_COPY_EVERYTHING is set, this calls copy_inode_items_to_log(), which calls btrfs_log_prealloc_extents(). - btrfs_log_prealloc_extents() finds the 4k-12k prealloc extent in the filesystem tree. Since it starts before i_size, it skips it. Since it is the last item in its B-tree leaf, it calls btrfs_next_leaf(). - btrfs_next_leaf() unlocks the path. - The ordered extent completion runs, which converts the 4k-8k part of the prealloc extent to written and inserts the remaining prealloc part from 8k-12k. - btrfs_next_leaf() does a search and finds the new prealloc extent 8k-12k. - btrfs_log_prealloc_extents() copies the 8k-12k prealloc extent into the log tree. Note that it overlaps with the 4k-12k prealloc extent that was copied to the log tree by the first fsync. - fsync calls btrfs_log_changed_extents(), which tries to log the 4k-8k extent that was written. - This tries to drop the range 4k-8k in the log tree, which requires adjusting the start of the 4k-12k prealloc extent in the log tree to 8k. - btrfs_set_item_key_safe() sees that there is already an extent starting at 8k in the log tree and calls BUG(). Fix this by detecting when we're about to insert an overlapping file extent item in the log tree and truncating the part that would overlap. CC: [email protected] # 6.1+ Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Omar Sandoval <[email protected]> Signed-off-by: David Sterba <[email protected]>

====================================================== WARNING: possible circular locking dependency detected 6.10.0-rc2-ktest-00018-gebd1d148b278 thesofproject#144 Not tainted ------------------------------------------------------ fio/1345 is trying to acquire lock: ffff88813e200ab8 (&c->snapshot_create_lock){++++}-{3:3}, at: bch2_truncate+0x76/0xf0 but task is already holding lock: ffff888105a1fa38 (&sb->s_type->i_mutex_key#13){+.+.}-{3:3}, at: do_truncate+0x7b/0xc0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&sb->s_type->i_mutex_key#13){+.+.}-{3:3}: down_write+0x3d/0xd0 bch2_write_iter+0x1c0/0x10f0 vfs_write+0x24a/0x560 __x64_sys_pwrite64+0x77/0xb0 x64_sys_call+0x17e5/0x1ab0 do_syscall_64+0x68/0x130 entry_SYSCALL_64_after_hwframe+0x4b/0x53 -> #1 (sb_writers#10){.+.+}-{0:0}: mnt_want_write+0x4a/0x1d0 filename_create+0x69/0x1a0 user_path_create+0x38/0x50 bch2_fs_file_ioctl+0x315/0xbf0 __x64_sys_ioctl+0x297/0xaf0 x64_sys_call+0x10cb/0x1ab0 do_syscall_64+0x68/0x130 entry_SYSCALL_64_after_hwframe+0x4b/0x53 -> #0 (&c->snapshot_create_lock){++++}-{3:3}: __lock_acquire+0x1445/0x25b0 lock_acquire+0xbd/0x2b0 down_read+0x40/0x180 bch2_truncate+0x76/0xf0 bchfs_truncate+0x240/0x3f0 bch2_setattr+0x7b/0xb0 notify_change+0x322/0x4b0 do_truncate+0x8b/0xc0 do_ftruncate+0x110/0x270 __x64_sys_ftruncate+0x43/0x80 x64_sys_call+0x1373/0x1ab0 do_syscall_64+0x68/0x130 entry_SYSCALL_64_after_hwframe+0x4b/0x53 other info that might help us debug this: Chain exists of: &c->snapshot_create_lock --> sb_writers#10 --> &sb->s_type->i_mutex_key#13 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&sb->s_type->i_mutex_key#13); lock(sb_writers#10); lock(&sb->s_type->i_mutex_key#13); rlock(&c->snapshot_create_lock); *** DEADLOCK *** Signed-off-by: Kent Overstreet <[email protected]>

…git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: Patch #1 fixes insufficient sanitization of netlink attributes for the inner expression which can trigger nul-pointer dereference, from Davide Ornaghi. Patch #2 address a report that there is a race condition between namespace cleanup and the garbage collection of the list:set type. This patch resolves this issue with other minor issues as well, from Jozsef Kadlecsik. Patch #3 ip6_route_me_harder() ignores flowlabel/dsfield when ip dscp has been mangled, this unbreaks ip6 dscp set $v, from Florian Westphal. All of these patches address issues that are present in several releases. * tag 'nf-24-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: Use flowlabel flow key when re-routing mangled packets netfilter: ipset: Fix race between namespace cleanup and gc in the list:set type netfilter: nft_inner: validate mandatory meta and payload ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

Nikolay Aleksandrov says: ==================== net: bridge: mst: fix suspicious rcu usage warning This set fixes a suspicious RCU usage warning triggered by syzbot[1] in the bridge's MST code. After I converted br_mst_set_state to RCU, I forgot to update the vlan group dereference helper. Fix it by using the proper helper, in order to do that we need to pass the vlan group which is already obtained correctly by the callers for their respective context. Patch 01 is a requirement for the fix in patch 02. Note I did consider rcu_dereference_rtnl() but the churn is much bigger and in every part of the bridge. We can do that as a cleanup in net-next. [1] https://syzkaller.appspot.com/bug?extid=9bbe2de1bc9d470eb5fe ============================= WARNING: suspicious RCU usage 6.10.0-rc2-syzkaller-00235-g8a92980606e3 #0 Not tainted ----------------------------- net/bridge/br_private.h:1599 suspicious rcu_dereference_protected() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 4 locks held by syz-executor.1/5374: #0: ffff888022d50b18 (&mm->mmap_lock){++++}-{3:3}, at: mmap_read_lock include/linux/mmap_lock.h:144 [inline] #0: ffff888022d50b18 (&mm->mmap_lock){++++}-{3:3}, at: __mm_populate+0x1b0/0x460 mm/gup.c:2111 #1: ffffc90000a18c00 ((&p->forward_delay_timer)){+.-.}-{0:0}, at: call_timer_fn+0xc0/0x650 kernel/time/timer.c:1789 #2: ffff88805fb2ccb8 (&br->lock){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] #2: ffff88805fb2ccb8 (&br->lock){+.-.}-{2:2}, at: br_forward_delay_timer_expired+0x50/0x440 net/bridge/br_stp_timer.c:86 #3: ffffffff8e333fa0 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:329 [inline] #3: ffffffff8e333fa0 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:781 [inline] #3: ffffffff8e333fa0 (rcu_read_lock){....}-{1:2}, at: br_mst_set_state+0x171/0x7a0 net/bridge/br_mst.c:105 stack backtrace: CPU: 1 PID: 5374 Comm: syz-executor.1 Not tainted 6.10.0-rc2-syzkaller-00235-g8a92980606e3 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 lockdep_rcu_suspicious+0x221/0x340 kernel/locking/lockdep.c:6712 nbp_vlan_group net/bridge/br_private.h:1599 [inline] br_mst_set_state+0x29e/0x7a0 net/bridge/br_mst.c:106 br_set_state+0x28a/0x7b0 net/bridge/br_stp.c:47 br_forward_delay_timer_expired+0x176/0x440 net/bridge/br_stp_timer.c:88 call_timer_fn+0x18e/0x650 kernel/time/timer.c:1792 expire_timers kernel/time/timer.c:1843 [inline] __run_timers kernel/time/timer.c:2417 [inline] __run_timer_base+0x66a/0x8e0 kernel/time/timer.c:2428 run_timer_base kernel/time/timer.c:2437 [inline] run_timer_softirq+0xb7/0x170 kernel/time/timer.c:2447 handle_softirqs+0x2c4/0x970 kernel/softirq.c:554 __do_softirq kernel/softirq.c:588 [inline] invoke_softirq kernel/softirq.c:428 [inline] __irq_exit_rcu+0xf4/0x1c0 kernel/softirq.c:637 irq_exit_rcu+0x9/0x30 kernel/softirq.c:649 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1043 [inline] sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1043 </IRQ> <TASK> ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

The syzbot fuzzer found that the interrupt-URB completion callback in the cdc-wdm driver was taking too long, and the driver's immediate resubmission of interrupt URBs with -EPROTO status combined with the dummy-hcd emulation to cause a CPU lockup: cdc_wdm 1-1:1.0: nonzero urb status received: -71 cdc_wdm 1-1:1.0: wdm_int_callback - 0 bytes watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [syz-executor782:6625] CPU#0 Utilization every 4s during lockup: #1: 98% system, 0% softirq, 3% hardirq, 0% idle #2: 98% system, 0% softirq, 3% hardirq, 0% idle #3: 98% system, 0% softirq, 3% hardirq, 0% idle #4: 98% system, 0% softirq, 3% hardirq, 0% idle thesofproject#5: 98% system, 1% softirq, 3% hardirq, 0% idle Modules linked in: irq event stamp: 73096 hardirqs last enabled at (73095): [<ffff80008037bc00>] console_emit_next_record kernel/printk/printk.c:2935 [inline] hardirqs last enabled at (73095): [<ffff80008037bc00>] console_flush_all+0x650/0xb74 kernel/printk/printk.c:2994 hardirqs last disabled at (73096): [<ffff80008af10b00>] __el1_irq arch/arm64/kernel/entry-common.c:533 [inline] hardirqs last disabled at (73096): [<ffff80008af10b00>] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:551 softirqs last enabled at (73048): [<ffff8000801ea530>] softirq_handle_end kernel/softirq.c:400 [inline] softirqs last enabled at (73048): [<ffff8000801ea530>] handle_softirqs+0xa60/0xc34 kernel/softirq.c:582 softirqs last disabled at (73043): [<ffff800080020de8>] __do_softirq+0x14/0x20 kernel/softirq.c:588 CPU: 0 PID: 6625 Comm: syz-executor782 Tainted: G W 6.10.0-rc2-syzkaller-g8867bbd4a056 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 Testing showed that the problem did not occur if the two error messages -- the first two lines above -- were removed; apparently adding material to the kernel log takes a surprisingly large amount of time. In any case, the best approach for preventing these lockups and to avoid spamming the log with thousands of error messages per second is to ratelimit the two dev_err() calls. Therefore we replace them with dev_err_ratelimited(). Signed-off-by: Alan Stern <[email protected]> Suggested-by: Greg KH <[email protected]> Reported-and-tested-by: [email protected] Closes: https://lore.kernel.org/linux-usb/[email protected]/ Reported-and-tested-by: [email protected] Closes: https://lore.kernel.org/linux-usb/[email protected]/ Fixes: 9908a32 ("USB: remove err() macro from usb class drivers") Link: https://lore.kernel.org/linux-usb/[email protected]/ Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

Luis has been reporting an assert failure when freeing an inode cluster during inode inactivation for a while. The assert looks like: XFS: Assertion failed: bp->b_flags & XBF_DONE, file: fs/xfs/xfs_trans_buf.c, line: 241 ------------[ cut here ]------------ kernel BUG at fs/xfs/xfs_message.c:102! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 4 PID: 73 Comm: kworker/4:1 Not tainted 6.10.0-rc1 #4 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: xfs-inodegc/loop5 xfs_inodegc_worker [xfs] RIP: 0010:assfail (fs/xfs/xfs_message.c:102) xfs RSP: 0018:ffff88810188f7f0 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff88816e748250 RCX: 1ffffffff844b0e7 RDX: 0000000000000004 RSI: ffff88810188f558 RDI: ffffffffc2431fa0 RBP: 1ffff11020311f01 R08: 0000000042431f9f R09: ffffed1020311e9b R10: ffff88810188f4df R11: ffffffffac725d70 R12: ffff88817a3f4000 R13: ffff88812182f000 R14: ffff88810188f998 R15: ffffffffc2423f80 FS: 0000000000000000(0000) GS:ffff8881c8400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055fe9d0f109c CR3: 000000014426c002 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> xfs_trans_read_buf_map (fs/xfs/xfs_trans_buf.c:241 (discriminator 1)) xfs xfs_imap_to_bp (fs/xfs/xfs_trans.h:210 fs/xfs/libxfs/xfs_inode_buf.c:138) xfs xfs_inode_item_precommit (fs/xfs/xfs_inode_item.c:145) xfs xfs_trans_run_precommits (fs/xfs/xfs_trans.c:931) xfs __xfs_trans_commit (fs/xfs/xfs_trans.c:966) xfs xfs_inactive_ifree (fs/xfs/xfs_inode.c:1811) xfs xfs_inactive (fs/xfs/xfs_inode.c:2013) xfs xfs_inodegc_worker (fs/xfs/xfs_icache.c:1841 fs/xfs/xfs_icache.c:1886) xfs process_one_work (kernel/workqueue.c:3231) worker_thread (kernel/workqueue.c:3306 (discriminator 2) kernel/workqueue.c:3393 (discriminator 2)) kthread (kernel/kthread.c:389) ret_from_fork (arch/x86/kernel/process.c:147) ret_from_fork_asm (arch/x86/entry/entry_64.S:257) </TASK> And occurs when the the inode precommit handlers is attempt to look up the inode cluster buffer to attach the inode for writeback. The trail of logic that I can reconstruct is as follows. 1. the inode is clean when inodegc runs, so it is not attached to a cluster buffer when precommit runs. 2. #1 implies the inode cluster buffer may be clean and not pinned by dirty inodes when inodegc runs. 3. #2 implies that the inode cluster buffer can be reclaimed by memory pressure at any time. 4. The assert failure implies that the cluster buffer was attached to the transaction, but not marked done. It had been accessed earlier in the transaction, but not marked done. 5. #4 implies the cluster buffer has been invalidated (i.e. marked stale). 6. thesofproject#5 implies that the inode cluster buffer was instantiated uninitialised in the transaction in xfs_ifree_cluster(), which only instantiates the buffers to invalidate them and never marks them as done. Given factors 1-3, this issue is highly dependent on timing and environmental factors. Hence the issue can be very difficult to reproduce in some situations, but highly reliable in others. Luis has an environment where it can be reproduced easily by g/531 but, OTOH, I've reproduced it only once in ~2000 cycles of g/531. I think the fix is to have xfs_ifree_cluster() set the XBF_DONE flag on the cluster buffers, even though they may not be initialised. The reasons why I think this is safe are: 1. A buffer cache lookup hit on a XBF_STALE buffer will clear the XBF_DONE flag. Hence all future users of the buffer know they have to re-initialise the contents before use and mark it done themselves. 2. xfs_trans_binval() sets the XFS_BLI_STALE flag, which means the buffer remains locked until the journal commit completes and the buffer is unpinned. Hence once marked XBF_STALE/XFS_BLI_STALE by xfs_ifree_cluster(), the only context that can access the freed buffer is the currently running transaction. 3. #2 implies that future buffer lookups in the currently running transaction will hit the transaction match code and not the buffer cache. Hence XBF_STALE and XFS_BLI_STALE will not be cleared unless the transaction initialises and logs the buffer with valid contents again. At which point, the buffer will be marked marked XBF_DONE again, so having XBF_DONE already set on the stale buffer is a moot point. 4. #2 also implies that any concurrent access to that cluster buffer will block waiting on the buffer lock until the inode cluster has been fully freed and is no longer an active inode cluster buffer. 5. #4 + #1 means that any future user of the disk range of that buffer will always see the range of disk blocks covered by the cluster buffer as not done, and hence must initialise the contents themselves. 6. Setting XBF_DONE in xfs_ifree_cluster() then means the unlinked inode precommit code will see a XBF_DONE buffer from the transaction match as it expects. It can then attach the stale but newly dirtied inode to the stale but newly dirtied cluster buffer without unexpected failures. The stale buffer will then sail through the journal and do the right thing with the attached stale inode during unpin. Hence the fix is just one line of extra code. The explanation of why we have to set XBF_DONE in xfs_ifree_cluster, OTOH, is long and complex.... Fixes: 82842fe ("xfs: fix AGF vs inode cluster buffer deadlock") Signed-off-by: Dave Chinner <[email protected]> Tested-by: Luis Chamberlain <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Signed-off-by: Chandan Babu R <[email protected]>

It is possible to trigger a use-after-free by: * attaching an fentry probe to __sock_release() and the probe calling the bpf_get_socket_cookie() helper * running traceroute -I 1.1.1.1 on a freshly booted VM A KASAN enabled kernel will log something like below (decoded and stripped): ================================================================== BUG: KASAN: slab-use-after-free in __sock_gen_cookie (./arch/x86/include/asm/atomic64_64.h:15 ./include/linux/atomic/atomic-arch-fallback.h:2583 ./include/linux/atomic/atomic-instrumented.h:1611 net/core/sock_diag.c:29) Read of size 8 at addr ffff888007110dd8 by task traceroute/299 CPU: 2 PID: 299 Comm: traceroute Tainted: G E 6.10.0-rc2+ #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:117 (discriminator 1)) print_report (mm/kasan/report.c:378 mm/kasan/report.c:488) ? __sock_gen_cookie (./arch/x86/include/asm/atomic64_64.h:15 ./include/linux/atomic/atomic-arch-fallback.h:2583 ./include/linux/atomic/atomic-instrumented.h:1611 net/core/sock_diag.c:29) kasan_report (mm/kasan/report.c:603) ? __sock_gen_cookie (./arch/x86/include/asm/atomic64_64.h:15 ./include/linux/atomic/atomic-arch-fallback.h:2583 ./include/linux/atomic/atomic-instrumented.h:1611 net/core/sock_diag.c:29) kasan_check_range (mm/kasan/generic.c:183 mm/kasan/generic.c:189) __sock_gen_cookie (./arch/x86/include/asm/atomic64_64.h:15 ./include/linux/atomic/atomic-arch-fallback.h:2583 ./include/linux/atomic/atomic-instrumented.h:1611 net/core/sock_diag.c:29) bpf_get_socket_ptr_cookie (./arch/x86/include/asm/preempt.h:94 ./include/linux/sock_diag.h:42 net/core/filter.c:5094 net/core/filter.c:5092) bpf_prog_875642cf11f1d139___sock_release+0x6e/0x8e bpf_trampoline_6442506592+0x47/0xaf __sock_release (net/socket.c:652) __sock_create (net/socket.c:1601) ... Allocated by task 299 on cpu 2 at 78.328492s: kasan_save_stack (mm/kasan/common.c:48) kasan_save_track (mm/kasan/common.c:68) __kasan_slab_alloc (mm/kasan/common.c:312 mm/kasan/common.c:338) kmem_cache_alloc_noprof (mm/slub.c:3941 mm/slub.c:4000 mm/slub.c:4007) sk_prot_alloc (net/core/sock.c:2075) sk_alloc (net/core/sock.c:2134) inet_create (net/ipv4/af_inet.c:327 net/ipv4/af_inet.c:252) __sock_create (net/socket.c:1572) __sys_socket (net/socket.c:1660 net/socket.c:1644 net/socket.c:1706) __x64_sys_socket (net/socket.c:1718) do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Freed by task 299 on cpu 2 at 78.328502s: kasan_save_stack (mm/kasan/common.c:48) kasan_save_track (mm/kasan/common.c:68) kasan_save_free_info (mm/kasan/generic.c:582) poison_slab_object (mm/kasan/common.c:242) __kasan_slab_free (mm/kasan/common.c:256) kmem_cache_free (mm/slub.c:4437 mm/slub.c:4511) __sk_destruct (net/core/sock.c:2117 net/core/sock.c:2208) inet_create (net/ipv4/af_inet.c:397 net/ipv4/af_inet.c:252) __sock_create (net/socket.c:1572) __sys_socket (net/socket.c:1660 net/socket.c:1644 net/socket.c:1706) __x64_sys_socket (net/socket.c:1718) do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Fix this by clearing the struct socket reference in sk_common_release() to cover all protocol families create functions, which may already attached the reference to the sk object with sock_init_data(). Fixes: c5dbb89 ("bpf: Expose bpf_get_socket_cookie to tracing programs") Suggested-by: Kuniyuki Iwashima <[email protected]> Signed-off-by: Ignat Korchagin <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/netdev/[email protected]/T/ Reviewed-by: Kuniyuki Iwashima <[email protected]> Reviewed-by: D. Wythe <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>

…git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: Patch #1 fixes the suspicious RCU usage warning that resulted from the recent fix for the race between namespace cleanup and gc in ipset left out checking the pernet exit phase when calling rcu_dereference_protected(), from Jozsef Kadlecsik. Patch #2 fixes incorrect input and output netdevice in SRv6 prerouting hooks, from Jianguo Wu. Patch #3 moves nf_hooks_lwtunnel sysctl toggle to the netfilter core. The connection tracking system is loaded on-demand, this ensures availability of this knob regardless. Patch #4-thesofproject#5 adds selftests for SRv6 netfilter hooks also from Jianguo Wu. netfilter pull request 24-06-19 * tag 'nf-24-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: selftests: add selftest for the SRv6 End.DX6 behavior with netfilter selftests: add selftest for the SRv6 End.DX4 behavior with netfilter netfilter: move the sysctl nf_hooks_lwtunnel into the netfilter core seg6: fix parameter passing when calling NF_HOOK() in End.DX4 and End.DX6 behaviors netfilter: ipset: Fix suspicious rcu_dereference_protected() ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>

…/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.10, take #2 - Fix dangling references to a redistributor region if the vgic was prematurely destroyed. - Properly mark FFA buffers as released, ensuring that both parties can make forward progress.

into HEAD KVM/riscv fixes for 6.10, take #2 - Fix compilation for KVM selftests

This just standardizes the use of MIN() and MAX() macros, with the very traditional semantics. The goal is to use these for C constant expressions and for top-level / static initializers, and so be able to simplify the min()/max() macros. These macro names were used by various kernel code - they are very traditional, after all - and all such users have been fixed up, with a few different approaches: - trivial duplicated macro definitions have been removed Note that 'trivial' here means that it's obviously kernel code that already included all the major kernel headers, and thus gets the new generic MIN/MAX macros automatically. - non-trivial duplicated macro definitions are guarded with #ifndef This is the "yes, they define their own versions, but no, the include situation is not entirely obvious, and maybe they don't get the generic version automatically" case. - strange use case #1 A couple of drivers decided that the way they want to describe their versioning is with #define MAJ 1 #define MIN 2 #define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) which adds zero value and I just did my Alexander the Great impersonation, and rewrote that pointless Gordian knot as #define DRV_VERSION "1.2" instead. - strange use case #2 A couple of drivers thought that it's a good idea to have a random 'MIN' or 'MAX' define for a value or index into a table, rather than the traditional macro that takes arguments. These values were re-written as C enum's instead. The new function-line macros only expand when followed by an open parenthesis, and thus don't clash with enum use. Happily, there weren't really all that many of these cases, and a lot of users already had the pattern of using '#ifndef' guarding (or in one case just using '#undef MIN') before defining their own private version that does the same thing. I left such cases alone. Cc: David Laight <[email protected]> Cc: Lorenzo Stoakes <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>

…pinlock_t' This lock is acquired under irq_desc::lock with interrupts disabled. When PREEMPT_RT is enabled, 'spinlock_t' becomes preemptible, which results in invalid lock acquire context; [ BUG: Invalid wait context ] swapper/0/1 is trying to lock: ffff0000008fed30 (&ctl->lock){....}-{3:3}, at: meson_gpio_irq_update_bits0 other info that might help us debug this: context-{5:5} 3 locks held by swapper/0/1: #0: ffff0000003cd0f8 (&dev->mutex){....}-{4:4}, at: __driver_attach+0x90c #1: ffff000004714650 (&desc->request_mutex){+.+.}-{4:4}, at: __setup_irq0 #2: ffff0000047144c8 (&irq_desc_lock_class){-.-.}-{2:2}, at: __setup_irq0 stack backtrace: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.9.9-sdkernel #1 Call trace: _raw_spin_lock_irqsave+0x60/0x88 meson_gpio_irq_update_bits+0x34/0x70 meson8_gpio_irq_set_type+0x78/0xc4 meson_gpio_irq_set_type+0x30/0x60 __irq_set_trigger+0x60/0x180 __setup_irq+0x30c/0x6e0 request_threaded_irq+0xec/0x1a4 Fixes: 215f4cc ("irqchip/meson: Add support for gpio interrupt controller") Signed-off-by: Arseniy Krasnov <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/all/[email protected]

…git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: Fix a possible null-ptr-deref sometimes triggered by iptables-restore at boot time. Register iptables {ipv4,ipv6} nat table pernet in first place to fix this issue. Patch #1 and #2 from Kuniyuki Iwashima. netfilter pull request 24-07-31 * tag 'nf-24-07-31' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: iptables: Fix potential null-ptr-deref in ip6table_nat_table_init(). netfilter: iptables: Fix null-ptr-deref in iptable_nat_table_init(). ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]>

Currently the dma debugging code can end up indirectly calling printk under the radix_lock. This happens when a radix tree node allocation fails. This is a problem because the printk code, when used together with netconsole, can end up inside the dma debugging code while trying to transmit a message over netcons. This creates the possibility of either a circular deadlock on the same CPU, with that CPU trying to grab the radix_lock twice, or an ABBA deadlock between different CPUs, where one CPU grabs the console lock first and then waits for the radix_lock, while the other CPU is holding the radix_lock and is waiting for the console lock. The trace captured by lockdep is of the ABBA variant. -> #2 (&dma_entry_hash[i].lock){-.-.}-{2:2}: _raw_spin_lock_irqsave+0x5a/0x90 debug_dma_map_page+0x79/0x180 dma_map_page_attrs+0x1d2/0x2f0 bnxt_start_xmit+0x8c6/0x1540 netpoll_start_xmit+0x13f/0x180 netpoll_send_skb+0x20d/0x320 netpoll_send_udp+0x453/0x4a0 write_ext_msg+0x1b9/0x460 console_flush_all+0x2ff/0x5a0 console_unlock+0x55/0x180 vprintk_emit+0x2e3/0x3c0 devkmsg_emit+0x5a/0x80 devkmsg_write+0xfd/0x180 do_iter_readv_writev+0x164/0x1b0 vfs_writev+0xf9/0x2b0 do_writev+0x6d/0x110 do_syscall_64+0x80/0x150 entry_SYSCALL_64_after_hwframe+0x4b/0x53 -> #0 (console_owner){-.-.}-{0:0}: __lock_acquire+0x15d1/0x31a0 lock_acquire+0xe8/0x290 console_flush_all+0x2ea/0x5a0 console_unlock+0x55/0x180 vprintk_emit+0x2e3/0x3c0 _printk+0x59/0x80 warn_alloc+0x122/0x1b0 __alloc_pages_slowpath+0x1101/0x1120 __alloc_pages+0x1eb/0x2c0 alloc_slab_page+0x5f/0x150 new_slab+0x2dc/0x4e0 ___slab_alloc+0xdcb/0x1390 kmem_cache_alloc+0x23d/0x360 radix_tree_node_alloc+0x3c/0xf0 radix_tree_insert+0xf5/0x230 add_dma_entry+0xe9/0x360 dma_map_page_attrs+0x1d2/0x2f0 __bnxt_alloc_rx_frag+0x147/0x180 bnxt_alloc_rx_data+0x79/0x160 bnxt_rx_skb+0x29/0xc0 bnxt_rx_pkt+0xe22/0x1570 __bnxt_poll_work+0x101/0x390 bnxt_poll+0x7e/0x320 __napi_poll+0x29/0x160 net_rx_action+0x1e0/0x3e0 handle_softirqs+0x190/0x510 run_ksoftirqd+0x4e/0x90 smpboot_thread_fn+0x1a8/0x270 kthread+0x102/0x120 ret_from_fork+0x2f/0x40 ret_from_fork_asm+0x11/0x20 This bug is more likely than it seems, because when one CPU has run out of memory, chances are the other has too. The good news is, this bug is hidden behind the CONFIG_DMA_API_DEBUG, so not many users are likely to trigger it. Signed-off-by: Rik van Riel <[email protected]> Reported-by: Konstantin Ovsepian <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>

linkwatch_event() grabs possibly very contended RTNL mutex. system_wq is not suitable for such work. Inspired by many noisy syzbot reports. 3 locks held by kworker/0:7/5266: #0: ffff888015480948 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work kernel/workqueue.c:3206 [inline] #0: ffff888015480948 ((wq_completion)events){+.+.}-{0:0}, at: process_scheduled_works+0x90a/0x1830 kernel/workqueue.c:3312 #1: ffffc90003f6fd00 ((linkwatch_work).work){+.+.}-{0:0}, at: process_one_work kernel/workqueue.c:3207 [inline] , at: process_scheduled_works+0x945/0x1830 kernel/workqueue.c:3312 #2: ffffffff8fa6f208 (rtnl_mutex){+.+.}-{3:3}, at: linkwatch_event+0xe/0x60 net/core/link_watch.c:276 Reported-by: syzbot <[email protected]> Fixes: 1da177e ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <[email protected]> Reviewed-by: Kuniyuki Iwashima <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

When l2tp tunnels use a socket provided by userspace, we can hit lockdep splats like the below when data is transmitted through another (unrelated) userspace socket which then gets routed over l2tp. This issue was previously discussed here: https://lore.kernel.org/netdev/[email protected]/ The solution is to have lockdep treat socket locks of l2tp tunnel sockets separately than those of standard INET sockets. To do so, use a different lockdep subclass where lock nesting is possible. ============================================ WARNING: possible recursive locking detected 6.10.0+ thesofproject#34 Not tainted -------------------------------------------- iperf3/771 is trying to acquire lock: ffff8881027601d8 (slock-AF_INET/1){+.-.}-{2:2}, at: l2tp_xmit_skb+0x243/0x9d0 but task is already holding lock: ffff888102650d98 (slock-AF_INET/1){+.-.}-{2:2}, at: tcp_v4_rcv+0x1848/0x1e10 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(slock-AF_INET/1); lock(slock-AF_INET/1); *** DEADLOCK *** May be due to missing lock nesting notation 10 locks held by iperf3/771: #0: ffff888102650258 (sk_lock-AF_INET){+.+.}-{0:0}, at: tcp_sendmsg+0x1a/0x40 #1: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: __ip_queue_xmit+0x4b/0xbc0 #2: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x17a/0x1130 #3: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: process_backlog+0x28b/0x9f0 #4: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: ip_local_deliver_finish+0xf9/0x260 thesofproject#5: ffff888102650d98 (slock-AF_INET/1){+.-.}-{2:2}, at: tcp_v4_rcv+0x1848/0x1e10 thesofproject#6: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: __ip_queue_xmit+0x4b/0xbc0 thesofproject#7: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x17a/0x1130 thesofproject#8: ffffffff822ac1e0 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0xcc/0x1450 thesofproject#9: ffff888101f33258 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock#2){+...}-{2:2}, at: __dev_queue_xmit+0x513/0x1450 stack backtrace: CPU: 2 UID: 0 PID: 771 Comm: iperf3 Not tainted 6.10.0+ thesofproject#34 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0x69/0xa0 dump_stack+0xc/0x20 __lock_acquire+0x135d/0x2600 ? srso_alias_return_thunk+0x5/0xfbef5 lock_acquire+0xc4/0x2a0 ? l2tp_xmit_skb+0x243/0x9d0 ? __skb_checksum+0xa3/0x540 _raw_spin_lock_nested+0x35/0x50 ? l2tp_xmit_skb+0x243/0x9d0 l2tp_xmit_skb+0x243/0x9d0 l2tp_eth_dev_xmit+0x3c/0xc0 dev_hard_start_xmit+0x11e/0x420 sch_direct_xmit+0xc3/0x640 __dev_queue_xmit+0x61c/0x1450 ? ip_finish_output2+0xf4c/0x1130 ip_finish_output2+0x6b6/0x1130 ? srso_alias_return_thunk+0x5/0xfbef5 ? __ip_finish_output+0x217/0x380 ? srso_alias_return_thunk+0x5/0xfbef5 __ip_finish_output+0x217/0x380 ip_output+0x99/0x120 __ip_queue_xmit+0xae4/0xbc0 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? tcp_options_write.constprop.0+0xcb/0x3e0 ip_queue_xmit+0x34/0x40 __tcp_transmit_skb+0x1625/0x1890 __tcp_send_ack+0x1b8/0x340 tcp_send_ack+0x23/0x30 __tcp_ack_snd_check+0xa8/0x530 ? srso_alias_return_thunk+0x5/0xfbef5 tcp_rcv_established+0x412/0xd70 tcp_v4_do_rcv+0x299/0x420 tcp_v4_rcv+0x1991/0x1e10 ip_protocol_deliver_rcu+0x50/0x220 ip_local_deliver_finish+0x158/0x260 ip_local_deliver+0xc8/0xe0 ip_rcv+0xe5/0x1d0 ? __pfx_ip_rcv+0x10/0x10 __netif_receive_skb_one_core+0xce/0xe0 ? process_backlog+0x28b/0x9f0 __netif_receive_skb+0x34/0xd0 ? process_backlog+0x28b/0x9f0 process_backlog+0x2cb/0x9f0 __napi_poll.constprop.0+0x61/0x280 net_rx_action+0x332/0x670 ? srso_alias_return_thunk+0x5/0xfbef5 ? find_held_lock+0x2b/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 handle_softirqs+0xda/0x480 ? __dev_queue_xmit+0xa2c/0x1450 do_softirq+0xa1/0xd0 </IRQ> <TASK> __local_bh_enable_ip+0xc8/0xe0 ? __dev_queue_xmit+0xa2c/0x1450 __dev_queue_xmit+0xa48/0x1450 ? ip_finish_output2+0xf4c/0x1130 ip_finish_output2+0x6b6/0x1130 ? srso_alias_return_thunk+0x5/0xfbef5 ? __ip_finish_output+0x217/0x380 ? srso_alias_return_thunk+0x5/0xfbef5 __ip_finish_output+0x217/0x380 ip_output+0x99/0x120 __ip_queue_xmit+0xae4/0xbc0 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? tcp_options_write.constprop.0+0xcb/0x3e0 ip_queue_xmit+0x34/0x40 __tcp_transmit_skb+0x1625/0x1890 tcp_write_xmit+0x766/0x2fb0 ? __entry_text_end+0x102ba9/0x102bad ? srso_alias_return_thunk+0x5/0xfbef5 ? __might_fault+0x74/0xc0 ? srso_alias_return_thunk+0x5/0xfbef5 __tcp_push_pending_frames+0x56/0x190 tcp_push+0x117/0x310 tcp_sendmsg_locked+0x14c1/0x1740 tcp_sendmsg+0x28/0x40 inet_sendmsg+0x5d/0x90 sock_write_iter+0x242/0x2b0 vfs_write+0x68d/0x800 ? __pfx_sock_write_iter+0x10/0x10 ksys_write+0xc8/0xf0 __x64_sys_write+0x3d/0x50 x64_sys_call+0xfaf/0x1f50 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f4d143af992 Code: c3 8b 07 85 c0 75 24 49 89 fb 48 89 f0 48 89 d7 48 89 ce 4c 89 c2 4d 89 ca 4c 8b 44 24 08 4c 8b 4c 24 10 4c 89 5c 24 08 0f 05 <c3> e9 01 cc ff ff 41 54 b8 02 00 00 0 RSP: 002b:00007ffd65032058 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f4d143af992 RDX: 0000000000000025 RSI: 00007f4d143f3bcc RDI: 0000000000000005 RBP: 00007f4d143f2b28 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f4d143f3bcc R13: 0000000000000005 R14: 0000000000000000 R15: 00007ffd650323f0 </TASK> Fixes: 0b2c597 ("l2tp: close all race conditions in l2tp_tunnel_register()") Suggested-by: Eric Dumazet <[email protected]> Reported-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=6acef9e0a4d1f46c83d4 CC: [email protected] CC: [email protected] Signed-off-by: James Chapman <[email protected]> Signed-off-by: Tom Parkin <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

…on array The out-of-bounds access is reported by UBSAN: [ 0.000000] UBSAN: array-index-out-of-bounds in ../arch/riscv/kernel/vendor_extensions.c:41:66 [ 0.000000] index -1 is out of range for type 'riscv_isavendorinfo [32]' [ 0.000000] CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.11.0-rc2ubuntu-defconfig #2 [ 0.000000] Hardware name: riscv-virtio,qemu (DT) [ 0.000000] Call Trace: [ 0.000000] [<ffffffff94e078ba>] dump_backtrace+0x32/0x40 [ 0.000000] [<ffffffff95c83c1a>] show_stack+0x38/0x44 [ 0.000000] [<ffffffff95c94614>] dump_stack_lvl+0x70/0x9c [ 0.000000] [<ffffffff95c94658>] dump_stack+0x18/0x20 [ 0.000000] [<ffffffff95c8bbb2>] ubsan_epilogue+0x10/0x46 [ 0.000000] [<ffffffff95485a82>] __ubsan_handle_out_of_bounds+0x94/0x9c [ 0.000000] [<ffffffff94e09442>] __riscv_isa_vendor_extension_available+0x90/0x92 [ 0.000000] [<ffffffff94e043b6>] riscv_cpufeature_patch_func+0xc4/0x148 [ 0.000000] [<ffffffff94e035f8>] _apply_alternatives+0x42/0x50 [ 0.000000] [<ffffffff95e04196>] apply_boot_alternatives+0x3c/0x100 [ 0.000000] [<ffffffff95e05b52>] setup_arch+0x85a/0x8bc [ 0.000000] [<ffffffff95e00ca0>] start_kernel+0xa4/0xfb6 The dereferencing using cpu should actually not happen, so remove it. Fixes: 23c996f ("riscv: Extend cpufeature.c to detect vendor extensions") Signed-off-by: Alexandre Ghiti <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Palmer Dabbelt <[email protected]>

Lockdep reported a warning in Linux version 6.6: [ 414.344659] ================================ [ 414.345155] WARNING: inconsistent lock state [ 414.345658] 6.6.0-07439-gba2303cacfda thesofproject#6 Not tainted [ 414.346221] -------------------------------- [ 414.346712] inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. [ 414.347545] kworker/u10:3/1152 [HC0[0]:SC0[0]:HE0:SE1] takes: [ 414.349245] ffff88810edd1098 (&sbq->ws[i].wait){+.?.}-{2:2}, at: blk_mq_dispatch_rq_list+0x131c/0x1ee0 [ 414.351204] {IN-SOFTIRQ-W} state was registered at: [ 414.351751] lock_acquire+0x18d/0x460 [ 414.352218] _raw_spin_lock_irqsave+0x39/0x60 [ 414.352769] __wake_up_common_lock+0x22/0x60 [ 414.353289] sbitmap_queue_wake_up+0x375/0x4f0 [ 414.353829] sbitmap_queue_clear+0xdd/0x270 [ 414.354338] blk_mq_put_tag+0xdf/0x170 [ 414.354807] __blk_mq_free_request+0x381/0x4d0 [ 414.355335] blk_mq_free_request+0x28b/0x3e0 [ 414.355847] __blk_mq_end_request+0x242/0xc30 [ 414.356367] scsi_end_request+0x2c1/0x830 [ 414.345155] WARNING: inconsistent lock state [ 414.345658] 6.6.0-07439-gba2303cacfda thesofproject#6 Not tainted [ 414.346221] -------------------------------- [ 414.346712] inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. [ 414.347545] kworker/u10:3/1152 [HC0[0]:SC0[0]:HE0:SE1] takes: [ 414.349245] ffff88810edd1098 (&sbq->ws[i].wait){+.?.}-{2:2}, at: blk_mq_dispatch_rq_list+0x131c/0x1ee0 [ 414.351204] {IN-SOFTIRQ-W} state was registered at: [ 414.351751] lock_acquire+0x18d/0x460 [ 414.352218] _raw_spin_lock_irqsave+0x39/0x60 [ 414.352769] __wake_up_common_lock+0x22/0x60 [ 414.353289] sbitmap_queue_wake_up+0x375/0x4f0 [ 414.353829] sbitmap_queue_clear+0xdd/0x270 [ 414.354338] blk_mq_put_tag+0xdf/0x170 [ 414.354807] __blk_mq_free_request+0x381/0x4d0 [ 414.355335] blk_mq_free_request+0x28b/0x3e0 [ 414.355847] __blk_mq_end_request+0x242/0xc30 [ 414.356367] scsi_end_request+0x2c1/0x830 [ 414.356863] scsi_io_completion+0x177/0x1610 [ 414.357379] scsi_complete+0x12f/0x260 [ 414.357856] blk_complete_reqs+0xba/0xf0 [ 414.358338] __do_softirq+0x1b0/0x7a2 [ 414.358796] irq_exit_rcu+0x14b/0x1a0 [ 414.359262] sysvec_call_function_single+0xaf/0xc0 [ 414.359828] asm_sysvec_call_function_single+0x1a/0x20 [ 414.360426] default_idle+0x1e/0x30 [ 414.360873] default_idle_call+0x9b/0x1f0 [ 414.361390] do_idle+0x2d2/0x3e0 [ 414.361819] cpu_startup_entry+0x55/0x60 [ 414.362314] start_secondary+0x235/0x2b0 [ 414.362809] secondary_startup_64_no_verify+0x18f/0x19b [ 414.363413] irq event stamp: 428794 [ 414.363825] hardirqs last enabled at (428793): [<ffffffff816bfd1c>] ktime_get+0x1dc/0x200 [ 414.364694] hardirqs last disabled at (428794): [<ffffffff85470177>] _raw_spin_lock_irq+0x47/0x50 [ 414.365629] softirqs last enabled at (428444): [<ffffffff85474780>] __do_softirq+0x540/0x7a2 [ 414.366522] softirqs last disabled at (428419): [<ffffffff813f65ab>] irq_exit_rcu+0x14b/0x1a0 [ 414.367425] other info that might help us debug this: [ 414.368194] Possible unsafe locking scenario: [ 414.368900] CPU0 [ 414.369225] ---- [ 414.369548] lock(&sbq->ws[i].wait); [ 414.370000] <Interrupt> [ 414.370342] lock(&sbq->ws[i].wait); [ 414.370802] *** DEADLOCK *** [ 414.371569] 5 locks held by kworker/u10:3/1152: [ 414.372088] #0: ffff88810130e938 ((wq_completion)writeback){+.+.}-{0:0}, at: process_scheduled_works+0x357/0x13f0 [ 414.373180] #1: ffff88810201fdb8 ((work_completion)(&(&wb->dwork)->work)){+.+.}-{0:0}, at: process_scheduled_works+0x3a3/0x13f0 [ 414.374384] #2: ffffffff86ffbdc0 (rcu_read_lock){....}-{1:2}, at: blk_mq_run_hw_queue+0x637/0xa00 [ 414.375342] #3: ffff88810edd1098 (&sbq->ws[i].wait){+.?.}-{2:2}, at: blk_mq_dispatch_rq_list+0x131c/0x1ee0 [ 414.376377] #4: ffff888106205a08 (&hctx->dispatch_wait_lock){+.-.}-{2:2}, at: blk_mq_dispatch_rq_list+0x1337/0x1ee0 [ 414.378607] stack backtrace: [ 414.379177] CPU: 0 PID: 1152 Comm: kworker/u10:3 Not tainted 6.6.0-07439-gba2303cacfda thesofproject#6 [ 414.380032] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 414.381177] Workqueue: writeback wb_workfn (flush-253:0) [ 414.381805] Call Trace: [ 414.382136] <TASK> [ 414.382429] dump_stack_lvl+0x91/0xf0 [ 414.382884] mark_lock_irq+0xb3b/0x1260 [ 414.383367] ? __pfx_mark_lock_irq+0x10/0x10 [ 414.383889] ? stack_trace_save+0x8e/0xc0 [ 414.384373] ? __pfx_stack_trace_save+0x10/0x10 [ 414.384903] ? graph_lock+0xcf/0x410 [ 414.385350] ? save_trace+0x3d/0xc70 [ 414.385808] mark_lock.part.20+0x56d/0xa90 [ 414.386317] mark_held_locks+0xb0/0x110 [ 414.386791] ? __pfx_do_raw_spin_lock+0x10/0x10 [ 414.387320] lockdep_hardirqs_on_prepare+0x297/0x3f0 [ 414.387901] ? _raw_spin_unlock_irq+0x28/0x50 [ 414.388422] trace_hardirqs_on+0x58/0x100 [ 414.388917] _raw_spin_unlock_irq+0x28/0x50 [ 414.389422] __blk_mq_tag_busy+0x1d6/0x2a0 [ 414.389920] __blk_mq_get_driver_tag+0x761/0x9f0 [ 414.390899] blk_mq_dispatch_rq_list+0x1780/0x1ee0 [ 414.391473] ? __pfx_blk_mq_dispatch_rq_list+0x10/0x10 [ 414.392070] ? sbitmap_get+0x2b8/0x450 [ 414.392533] ? __blk_mq_get_driver_tag+0x210/0x9f0 [ 414.393095] __blk_mq_sched_dispatch_requests+0xd99/0x1690 [ 414.393730] ? elv_attempt_insert_merge+0x1b1/0x420 [ 414.394302] ? __pfx___blk_mq_sched_dispatch_requests+0x10/0x10 [ 414.394970] ? lock_acquire+0x18d/0x460 [ 414.395456] ? blk_mq_run_hw_queue+0x637/0xa00 [ 414.395986] ? __pfx_lock_acquire+0x10/0x10 [ 414.396499] blk_mq_sched_dispatch_requests+0x109/0x190 [ 414.397100] blk_mq_run_hw_queue+0x66e/0xa00 [ 414.397616] blk_mq_flush_plug_list.part.17+0x614/0x2030 [ 414.398244] ? __pfx_blk_mq_flush_plug_list.part.17+0x10/0x10 [ 414.398897] ? writeback_sb_inodes+0x241/0xcc0 [ 414.399429] blk_mq_flush_plug_list+0x65/0x80 [ 414.399957] __blk_flush_plug+0x2f1/0x530 [ 414.400458] ? __pfx___blk_flush_plug+0x10/0x10 [ 414.400999] blk_finish_plug+0x59/0xa0 [ 414.401467] wb_writeback+0x7cc/0x920 [ 414.401935] ? __pfx_wb_writeback+0x10/0x10 [ 414.402442] ? mark_held_locks+0xb0/0x110 [ 414.402931] ? __pfx_do_raw_spin_lock+0x10/0x10 [ 414.403462] ? lockdep_hardirqs_on_prepare+0x297/0x3f0 [ 414.404062] wb_workfn+0x2b3/0xcf0 [ 414.404500] ? __pfx_wb_workfn+0x10/0x10 [ 414.404989] process_scheduled_works+0x432/0x13f0 [ 414.405546] ? __pfx_process_scheduled_works+0x10/0x10 [ 414.406139] ? do_raw_spin_lock+0x101/0x2a0 [ 414.406641] ? assign_work+0x19b/0x240 [ 414.407106] ? lock_is_held_type+0x9d/0x110 [ 414.407604] worker_thread+0x6f2/0x1160 [ 414.408075] ? __kthread_parkme+0x62/0x210 [ 414.408572] ? lockdep_hardirqs_on_prepare+0x297/0x3f0 [ 414.409168] ? __kthread_parkme+0x13c/0x210 [ 414.409678] ? __pfx_worker_thread+0x10/0x10 [ 414.410191] kthread+0x33c/0x440 [ 414.410602] ? __pfx_kthread+0x10/0x10 [ 414.411068] ret_from_fork+0x4d/0x80 [ 414.411526] ? __pfx_kthread+0x10/0x10 [ 414.411993] ret_from_fork_asm+0x1b/0x30 [ 414.412489] </TASK> When interrupt is turned on while a lock holding by spin_lock_irq it throws a warning because of potential deadlock. blk_mq_prep_dispatch_rq blk_mq_get_driver_tag __blk_mq_get_driver_tag __blk_mq_alloc_driver_tag blk_mq_tag_busy -> tag is already busy // failed to get driver tag blk_mq_mark_tag_wait spin_lock_irq(&wq->lock) -> lock A (&sbq->ws[i].wait) __add_wait_queue(wq, wait) -> wait queue active blk_mq_get_driver_tag __blk_mq_tag_busy -> 1) tag must be idle, which means there can't be inflight IO spin_lock_irq(&tags->lock) -> lock B (hctx->tags) spin_unlock_irq(&tags->lock) -> unlock B, turn on interrupt accidentally -> 2) context must be preempt by IO interrupt to trigger deadlock. As shown above, the deadlock is not possible in theory, but the warning still need to be fixed. Fix it by using spin_lock_irqsave to get lockB instead of spin_lock_irq. Fixes: 4f1731d ("blk-mq: fix potential io hang by wrong 'wake_batch'") Signed-off-by: Li Lingfeng <[email protected]> Reviewed-by: Ming Lei <[email protected]> Reviewed-by: Yu Kuai <[email protected]> Reviewed-by: Bart Van Assche <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>

Prevent the call trace below from happening, by not allowing IPsec creation over a slave, if master device doesn't support IPsec. WARNING: CPU: 44 PID: 16136 at kernel/locking/rwsem.c:240 down_read+0x75/0x94 Modules linked in: esp4_offload esp4 act_mirred act_vlan cls_flower sch_ingress mlx5_vdpa vringh vhost_iotlb vdpa mst_pciconf(OE) nfsv3 nfs_acl nfs lockd grace fscache netfs xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_counter nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 rfkill cuse fuse rpcrdma sunrpc rdma_ucm ib_srpt ib_isert iscsi_target_mod target_core_mod ib_umad ib_iser libiscsi scsi_transport_iscsi rdma_cm ib_ipoib iw_cm ib_cm ipmi_ssif intel_rapl_msr intel_rapl_common amd64_edac edac_mce_amd kvm_amd kvm irqbypass crct10dif_pclmul crc32_pclmul mlx5_ib ghash_clmulni_intel sha1_ssse3 dell_smbios ib_uverbs aesni_intel crypto_simd dcdbas wmi_bmof dell_wmi_descriptor cryptd pcspkr ib_core acpi_ipmi sp5100_tco ccp i2c_piix4 ipmi_si ptdma k10temp ipmi_devintf ipmi_msghandler acpi_power_meter acpi_cpufreq ext4 mbcache jbd2 sd_mod t10_pi sg mgag200 drm_kms_helper syscopyarea sysfillrect mlx5_core sysimgblt fb_sys_fops cec ahci libahci mlxfw drm pci_hyperv_intf libata tg3 sha256_ssse3 tls megaraid_sas i2c_algo_bit psample wmi dm_mirror dm_region_hash dm_log dm_mod [last unloaded: mst_pci] CPU: 44 PID: 16136 Comm: kworker/44:3 Kdump: loaded Tainted: GOE 5.15.0-20240509.el8uek.uek7_u3_update_v6.6_ipsec_bf.x86_64 #2 Hardware name: Dell Inc. PowerEdge R7525/074H08, BIOS 2.0.3 01/15/2021 Workqueue: events xfrm_state_gc_task RIP: 0010:down_read+0x75/0x94 Code: 00 48 8b 45 08 65 48 8b 14 25 80 fc 01 00 83 e0 02 48 09 d0 48 83 c8 01 48 89 45 08 5d 31 c0 89 c2 89 c6 89 c7 e9 cb 88 3b 00 <0f> 0b 48 8b 45 08 a8 01 74 b2 a8 02 75 ae 48 89 c2 48 83 ca 02 f0 RSP: 0018:ffffb26387773da8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffa08b658af900 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ff886bc5e1366f2f RDI: 0000000000000000 RBP: ffffa08b658af940 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffa0a9bfb31540 R13: ffffa0a9bfb37900 R14: 0000000000000000 R15: ffffa0a9bfb37905 FS: 0000000000000000(0000) GS:ffffa0a9bfb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055a45ed814e8 CR3: 000000109038a000 CR4: 0000000000350ee0 Call Trace: <TASK> ? show_trace_log_lvl+0x1d6/0x2f9 ? show_trace_log_lvl+0x1d6/0x2f9 ? mlx5_devcom_for_each_peer_begin+0x29/0x60 [mlx5_core] ? down_read+0x75/0x94 ? __warn+0x80/0x113 ? down_read+0x75/0x94 ? report_bug+0xa4/0x11d ? handle_bug+0x35/0x8b ? exc_invalid_op+0x14/0x75 ? asm_exc_invalid_op+0x16/0x1b ? down_read+0x75/0x94 ? down_read+0xe/0x94 mlx5_devcom_for_each_peer_begin+0x29/0x60 [mlx5_core] mlx5_ipsec_fs_roce_tx_destroy+0xb1/0x130 [mlx5_core] tx_destroy+0x1b/0xc0 [mlx5_core] tx_ft_put+0x53/0xc0 [mlx5_core] mlx5e_xfrm_free_state+0x45/0x90 [mlx5_core] ___xfrm_state_destroy+0x10f/0x1a2 xfrm_state_gc_task+0x81/0xa9 process_one_work+0x1f1/0x3c6 worker_thread+0x53/0x3e4 ? process_one_work.cold+0x46/0x3c kthread+0x127/0x144 ? set_kthread_struct+0x60/0x52 ret_from_fork+0x22/0x2d </TASK> ---[ end trace 5ef7896144d398e1 ]--- Fixes: dfbd229 ("net/mlx5: Configure IPsec steering for egress RoCEv2 MPV traffic") Reviewed-by: Leon Romanovsky <[email protected]> Signed-off-by: Patrisious Haddad <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

…git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: Patch #1 disable BH when collecting stats via hardware offload to ensure concurrent updates from packet path do not result in losing stats. From Sebastian Andrzej Siewior. Patch #2 uses write seqcount to reset counters serialize against reader. Also from Sebastian Andrzej Siewior. Patch #3 ensures vlan header is in place before accessing its fields, according to KMSAN splat triggered by syzbot. * tag 'nf-24-08-22' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: flowtable: validate vlan header netfilter: nft_counter: Synchronize nft_counter_reset() against reader. netfilter: nft_counter: Disable BH in nft_counter_offload_stats(). ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

…/kernel/git/kvmarm/kvmarm into for-next/fixes KVM/arm64 fixes for 6.11, round #2 - Don't drop references on LPIs that weren't visited by the vgic-debug iterator - Cure lock ordering issue when unregistering vgic redistributors - Fix for misaligned stage-2 mappings when VMs are backed by hugetlb pages - Treat SGI registers as UNDEFINED if a VM hasn't been configured for GICv3 * tag 'kvmarm-fixes-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm: KVM: arm64: Make ICC_*SGI*_EL1 undef in the absence of a vGICv3 KVM: arm64: Ensure canonical IPA is hugepage-aligned when handling fault KVM: arm64: vgic: Don't hold config_lock while unregistering redistributors KVM: arm64: vgic-debug: Don't put unmarked LPIs KVM: arm64: vgic: Hold config_lock while tearing down a CPU interface KVM: selftests: arm64: Correct feature test for S1PIE in get-reg-list KVM: arm64: Tidying up PAuth code in KVM KVM: arm64: vgic-debug: Exit the iterator properly w/o LPI KVM: arm64: Enforce dependency on an ARMv8.4-aware toolchain docs: KVM: Fix register ID of SPSR_FIQ KVM: arm64: vgic: fix unexpected unlock sparse warnings KVM: arm64: fix kdoc warnings in W=1 builds KVM: arm64: fix override-init warnings in W=1 builds KVM: arm64: free kvm->arch.nested_mmus with kvfree()

…git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: Patch #1 sets on NFT_PKTINFO_L4PROTO for UDP packets less than 4 bytes payload from netdev/egress by subtracting skb_network_offset() when validating IPv4 packet length, otherwise 'meta l4proto udp' never matches. Patch #2 subtracts skb_network_offset() when validating IPv6 packet length for netdev/egress. netfilter pull request 24-08-28 * tag 'nf-24-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables_ipv6: consider network offset in netdev/egress validation netfilter: nf_tables: restore IP sanity checks for netdev/egress ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]>

I have done a lot of analysis for these type of devices and collaborated quite a bit with Nick Weihs (author of the first patch submitted for this including adding samsung_helper.c). More information can be found in the issue on Github [1] including additional rationale and testing. The existing implementation includes a large number of equalizer coef values that are not necessary to actually init and enable the speaker amps, as well as create a somewhat worse sound profile. Users have reported "muffled" or "muddy" sound; more information about this including my analysis of the differences can be found in the linked Github issue. This patch refactors the "v2" version of ALC298_FIXUP_SAMSUNG_AMP to a much simpler implementation which removes the new samsung_helper.c, reuses more of the existing patch_realtek.c, and sends significantly fewer unnecessary coef values (including removing all of these EQ-specific coef values). A pcm_playback_hook is used to dynamically enable and disable the speaker amps only when there will be audio playback; this is to match the behavior of how the driver for these devices is working in Windows, and is suspected but not yet tested or confirmed to help with power consumption. Support for models with 2 speaker amps vs 4 speaker amps is controlled by a specific quirk name for both types. A new int num_speaker_amps has been added to alc_spec so that the hooks can know how many speaker amps to enable or disable. This design was chosen to limit the number of places that subsystem ids will need to be maintained: like this, they can be maintained only once in the quirk table and there will not be another separate list of subsystem ids to maintain elsewhere in the code. Also updated the quirk name from ALC298_FIXUP_SAMSUNG_AMP2 to ALC298_FIXUP_SAMSUNG_AMP_V2_.. as this is not a quirk for "Amp #2" on ALC298 but is instead a different version of how to handle it. More devices have been added (see Github issue for testing confirmation), as well as a small cleanup to existing names. [1]: thesofproject#4055 (comment) Signed-off-by: Joshua Grisham <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Takashi Iwai <[email protected]>

bardliao added 2 commits June 20, 2019 17:51

ASoC: Intel: icl-match: add rt700 matching table

54f17aa

Add rt700 matching table. Signed-off-by: Bard Liao <[email protected]>

ASoC: intel: clean up cnl_rt700 machine driver

a7ea113

Clean up cnl_rt700 machine driver and add hdmi support. Signed-off-by: Bard Liao <[email protected]>

bardliao pushed a commit that referenced this pull request Jul 23, 2024

Merge tag 'kvm-riscv-fixes-6.10-2' of https://github.com/kvm-riscv/linux

e159d63

into HEAD KVM/riscv fixes for 6.10, take #2 - Fix compilation for KVM selftests

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Clean up cnl_rt700 machine driver #2

Clean up cnl_rt700 machine driver #2

bardliao commented Jun 20, 2019

Clean up cnl_rt700 machine driver #2

Clean up cnl_rt700 machine driver #2

Conversation

bardliao commented Jun 20, 2019