Loopback mode kcontrol support #10

xiulipan · 2018-06-28T11:42:29Z

Add topology parser for loopback mode kcontrol and switch kcontrol callback function for loopback mode kcontrol switch.
work with:
thesofproject/sof#26
thesofproject/soft#13

The values of bclk and fsync are inverted WRT the codec. But the existing solution already works for Broadwell, see the alsa-lib config: `alsa-lib/src/conf/topology/broadwell/broadwell.conf` This commit provides the backwards-compatible solution to fix this misuse. Signed-off-by: Kirill Marinushkin <[email protected]> Reviewed-by: Pierre-Louis Bossart <[email protected]> Tested-by: Pan Xiuli <[email protected]> Tested-by: Pierre-Louis Bossart <[email protected]> Cc: Jaroslav Kysela <[email protected]> Cc: Takashi Iwai <[email protected]> Cc: Mark Brown <[email protected]> Cc: Liam Girdwood <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Mark Brown <[email protected]> (cherry picked from commit a941e2f)

…nfigs Clock gating parameter is a part of `dai_fmt`. It is supported by `alsa-lib` when creating a topology binary file, but ignored by kernel when loading this topology file. After applying this commit, the clock gating parameter is not ignored any more. This solution is backwards compatible. The existing behaviour is not broken, because by default the parameter value is 0 and is ignored. snd_soc_tplg_hw_config.clock_gated = 0 => no effect snd_soc_tplg_hw_config.clock_gated = 1 => SND_SOC_DAIFMT_GATED snd_soc_tplg_hw_config.clock_gated = 2 => SND_SOC_DAIFMT_CONT For example, the following config, based on alsa-lib/src/conf/topology/broadwell/broadwell.conf, is now supported: ~~~~ SectionHWConfig."CodecHWConfig" { id "1" format "I2S" # physical audio format. pm_gate_clocks "true" # clock can be gated } SectionLink."Codec" { # used for binding to the physical link id "0" hw_configs [ "CodecHWConfig" ] default_hw_conf_id "1" } ~~~~ Signed-off-by: Kirill Marinushkin <[email protected]> Reviewed-by: Pierre-Louis Bossart <[email protected]> Cc: Jaroslav Kysela <[email protected]> Cc: Takashi Iwai <[email protected]> Cc: Mark Brown <[email protected]> Cc: Pan Xiuli <[email protected]> Cc: Liam Girdwood <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Mark Brown <[email protected]> (cherry picked from commit 933e1c4)

Current comment makes not clear the direction of mclk. Previously, similar description caused a misunderstanding for bclk_master and fsync_master. This commit solves the potential confusion the same way it is solved for bclk_master and fsync_master. Signed-off-by: Kirill Marinushkin <[email protected]> Acked-by: Pierre-Louis Bossart <[email protected]> Cc: Jaroslav Kysela <[email protected]> Cc: Takashi Iwai <[email protected]> Cc: Mark Brown <[email protected]> Cc: Pan Xiuli <[email protected]> Cc: Liam Girdwood <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Mark Brown <[email protected]> (cherry picked from commit e590522)

Register a compressed PCM if topology defines one. Signed-off-by: Liam Girdwood <[email protected]> Signed-off-by: Mark Brown <[email protected]> (cherry picked from commit 5db6aab)

All conditionally-defined routines in include/sound/soc.h expose a static inline fallback to avoid 0-day warnings and compilation issues, except snd_soc_new_compress(). Fixes: 5db6aab ('ASoC: topology: Add support for compressed PCMs') Signed-off-by: Pierre-Louis Bossart <[email protected]> Signed-off-by: Mark Brown <[email protected]> (cherry picked from commit 0b014d7)

Hard-coded setups conflict with topology defined ones. Move this code to codec_fixup so that SOF can override codec dai settings, e.g. to only use 2 channels. Signed-off-by: Pierre-Louis Bossart <[email protected]> Acked-by: Vinod Koul <[email protected]> Signed-off-by: Mark Brown <[email protected]> (cherry picked from commit bf14adc)

Currently, there are no pre-defined accessors for the elements in topology TLV data. In the absence of such offsets, the tlv data will have to be decoded using hardwired offset numbers 0-N depending on the type of TLV. This patch defines accessor offsets for the type, length, min and mute/step items in TLV data for DB_SCALE type tlv's. These will be used by drivers to decode the TLV data while loading topology thereby improving code readability. The type and len offsets are common for all TLV types. The min and step/mute offsets are specific to DB_SCALE tlv type. Signed-off-by: Ranjani Sridharan <[email protected]> Reviewed-by: Takashi Sakamoto <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> (cherry picked from commit 08f9f44)

HID is assumed to be made of TI PCI ID (0x104C) + part number, so all four 104C5121, 104C5122, 104C5141 104C5142 are valid. Signed-off-by: Pierre-Louis Bossart <[email protected]> Signed-off-by: Mark Brown <[email protected]> (cherry picked from commit b84f48d)

…LATFORM is enabled The sound/soc/intel/common/sst-acpi.c code only tries to load the "baytrail-pcm-audio" driver (and supporting board drivers) when SND_SST_ATOM_HIFI2_PLATFORM is not enabled, since otherwise these are handled by snd-soc-sst-atom-hifi2-platform.ko. Since these thus will never be used when SND_SST_ATOM_HIFI2_PLATFORM is enabled, building these drivers when it is enabled is useless. Add a Kconfig dependency to reflect this, so that SND_SOC_INTEL_BAYTRAIL cannot be enabled when SND_SST_ATOM_HIFI2_PLATFORM is also enabled. Signed-off-by: Hans de Goede <[email protected]> Acked-by: Pierre-Louis Bossart <[email protected]> Signed-off-by: Mark Brown <[email protected]> (cherry picked from commit ed55fe2)

Give topology clients more access to the topology data by passing index, pcm, link_config and dai_driver to clients. This allows clients to fully instantiate and track topology objects. The SOF driver is the first user of these new APIs and needs them to build component topology driver and FW objects. Signed-off-by: Liam Girdwood <[email protected]> Signed-off-by: Mark Brown <[email protected]> (cherry picked from commit c60b613)

Add a callback fro clients for notification about DAPM route loading and unloading. Signed-off-by: Liam Girdwood <[email protected]> Signed-off-by: Mark Brown <[email protected]> (cherry picked from commit 503e79b)

Sometime a component or topology may configure a DAI widget with no private data leading to a dev_dbg() dereferencne of this data. Fix this to check for non NULL private data and let users know if widget is missing DAI. Signed-off-by: Liam Girdwood <[email protected]> Signed-off-by: Mark Brown <[email protected]> (cherry picked from commit e01b4f6)

Use truncated names in bxt id table and bxt_da7219_max98357a machine as platform device id table expects names to be less then 20chars. Signed-off-by: Naveen Manohar <[email protected]> Signed-off-by: Pierre-Louis Bossart <[email protected]> Signed-off-by: Mark Brown <[email protected]> (cherry picked from commit 95555f5)

There is no need to deal with DMICs if the DSP is not present and there is no ACPI machine ID found. Simplify before moving these ACPI tables to sound/soc/intel/common Signed-off-by: Pierre-Louis Bossart <[email protected]> Signed-off-by: Mark Brown <[email protected]> (cherry picked from commit 5f15f26)

No functionality change, just move to common tables to make it easier to deal with SOF and share the same machine drivers - as done previously for BYT/CHT/HSW/BDW. Signed-off-by: Pierre-Louis Bossart <[email protected]> Signed-off-by: Mark Brown <[email protected]> (cherry picked from commit cbaa7f0)

This patch adds da7219_max98357a machine driver entry into machine table Signed-off-by: Naveen Manohar <[email protected]> Signed-off-by: Pierre-Louis Bossart <[email protected]> Signed-off-by: Mark Brown <[email protected]> (cherry picked from commit 65a3388)

No functionality change for Skylake driver, add relevant names needed by SOF for BXT/APL, GLK and CNL. Signed-off-by: Pierre-Louis Bossart <[email protected]> Signed-off-by: Mark Brown <[email protected]> (cherry picked from commit e6d298f)

While we are at it, add entries for machine drivers that are used on SOF-based platforms. The drivers will be submitted upstream after the core SOF patches, but there's no harm in adding these references now. Signed-off-by: Pierre-Louis Bossart <[email protected]> Signed-off-by: Mark Brown <[email protected]> (cherry picked from commit b453501)

… file There are two commercially-available Broadwell platforms based on I2S (Dell XPS13 and 'Samus' Pixel 2015 Chromebook). Fix a copy/paste issue to allow each platform to enable different features if needed when SOF is enabled Signed-off-by: Pierre-Louis Bossart <[email protected]> Signed-off-by: Mark Brown <[email protected]> (cherry picked from commit f0d9034)

Align with firmware tools, no functionality change Signed-off-by: Pierre-Louis Bossart <[email protected]>

…fig. Machine drivers statically define a number of DAI links that currently cannot be changed or removed by topology. This means PCMs and platform components cannot be changed by topology at runtime AND machine drivers are tightly coupled to topology. This patch allows topology to override the machine driver DAI link config in order to reuse machine drivers with different topologies and platform components. The patch supports :- 1) create new FE PCMs with a topology defined PCM ID. 2) destroy existing static FE PCMs 3) change the platform component driver. 4) assign any new HW params fixups. The patch requires no changes to the machine drivers, but does add some platform component flags that the platform component driver can assign before loading topologies. Signed-off-by: Liam Girdwood <[email protected]>

…writes Signed-off-by: Liam Girdwood <[email protected]>

Currently ALSA core blocks userspace for about 10 seconds for PCM R/W IO. This needs to be configurable for modern hardware like DSPs where no pointer update in milliseconds can indicate terminal DSP errors. Add a substream variable to set the wait time in ms. This allows userspace and drivers to recover more quickly from terminal DSP errors. Signed-off-by: Liam Girdwood <[email protected]>

The Sound Open Firmware driver core is a generic architecture independent layer that allows SOF to be used on many different different architectures and platforms. It abstracts DSP operations and IO methods so that the target DSP can be an internal memory mapped or external SPI or I2C based device. This abstraction also allows SOF to be run on many different VMs on the same physical HW. SOF also requires some data in ASoC PCM runtime data for looking up SOF data during ASoC PCM operations. Signed-off-by: Liam Girdwood <[email protected]>

SOF exposes regular ALSA Kcontrols that are defined by topology. This patch converts the Kcontrol IO to DSP IPC. Signed-off-by: Liam Girdwood <[email protected]>

Add debugFS files that can be used to expose DSP memories and and peripherals to userspace to assist with firmware debugging. Signed-off-by: Liam Girdwood <[email protected]>

Define an IPC ABI for all host <--> DSP communication. This ABI should be transport agnostic. i.e. it should work on MMIO and SPI/I2C style interfaces. Signed-off-by: Liam Girdwood <[email protected]>

Add support for exposing PCMs to userspace. PCMs are defined by topology and the operations in this patch map to SOF IPC calls. Signed-off-by: Liam Girdwood <[email protected]>

SOF uses topology to define the DAPM graphs and widgets, DAIs, PCMs and set parameters for init and run time usage. This patch loads topology and maps it to IPC commands that are build the topology on the DSP. Signed-off-by: Liam Girdwood <[email protected]>

Add a trace event buffer that can be used by userspace to read DSP runtime trace events alongside bespoke trace data in realtime for firmware debug. Signed-off-by: Liam Girdwood <[email protected]>

It's later supposed to be either a correct address or NULL. Without the initialization, it may contain an undefined value which results in the following segmentation fault: # perf top --sort comm -g --ignore-callees=do_idle terminates with: #0 0x00007ffff56b7685 in __strlen_avx2 () from /lib64/libc.so.6 thesofproject#1 0x00007ffff55e3802 in strdup () from /lib64/libc.so.6 thesofproject#2 0x00005555558cb139 in hist_entry__init (callchain_size=<optimized out>, sample_self=true, template=0x7fffde7fb110, he=0x7fffd801c250) at util/hist.c:489 thesofproject#3 hist_entry__new (template=template@entry=0x7fffde7fb110, sample_self=sample_self@entry=true) at util/hist.c:564 thesofproject#4 0x00005555558cb4ba in hists__findnew_entry (hists=hists@entry=0x5555561d9e38, entry=entry@entry=0x7fffde7fb110, al=al@entry=0x7fffde7fb420, sample_self=sample_self@entry=true) at util/hist.c:657 thesofproject#5 0x00005555558cba1b in __hists__add_entry (hists=hists@entry=0x5555561d9e38, al=0x7fffde7fb420, sym_parent=<optimized out>, bi=bi@entry=0x0, mi=mi@entry=0x0, sample=sample@entry=0x7fffde7fb4b0, sample_self=true, ops=0x0, block_info=0x0) at util/hist.c:288 thesofproject#6 0x00005555558cbb70 in hists__add_entry (sample_self=true, sample=0x7fffde7fb4b0, mi=0x0, bi=0x0, sym_parent=<optimized out>, al=<optimized out>, hists=0x5555561d9e38) at util/hist.c:1056 thesofproject#7 iter_add_single_cumulative_entry (iter=0x7fffde7fb460, al=<optimized out>) at util/hist.c:1056 thesofproject#8 0x00005555558cc8a4 in hist_entry_iter__add (iter=iter@entry=0x7fffde7fb460, al=al@entry=0x7fffde7fb420, max_stack_depth=<optimized out>, arg=arg@entry=0x7fffffff7db0) at util/hist.c:1231 thesofproject#9 0x00005555557cdc9a in perf_event__process_sample (machine=<optimized out>, sample=0x7fffde7fb4b0, evsel=<optimized out>, event=<optimized out>, tool=0x7fffffff7db0) at builtin-top.c:842 thesofproject#10 deliver_event (qe=<optimized out>, qevent=<optimized out>) at builtin-top.c:1202 thesofproject#11 0x00005555558a9318 in do_flush (show_progress=false, oe=0x7fffffff80e0) at util/ordered-events.c:244 thesofproject#12 __ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP, timestamp=timestamp@entry=0) at util/ordered-events.c:323 thesofproject#13 0x00005555558a9789 in __ordered_events__flush (timestamp=<optimized out>, how=<optimized out>, oe=<optimized out>) at util/ordered-events.c:339 thesofproject#14 ordered_events__flush (how=OE_FLUSH__TOP, oe=0x7fffffff80e0) at util/ordered-events.c:341 thesofproject#15 ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP) at util/ordered-events.c:339 thesofproject#16 0x00005555557cd631 in process_thread (arg=0x7fffffff7db0) at builtin-top.c:1114 thesofproject#17 0x00007ffff7bb817a in start_thread () from /lib64/libpthread.so.0 thesofproject#18 0x00007ffff5656dc3 in clone () from /lib64/libc.so.6 If you look at the frame thesofproject#2, the code is: 488 if (he->srcline) { 489 he->srcline = strdup(he->srcline); 490 if (he->srcline == NULL) 491 goto err_rawdata; 492 } If he->srcline is not NULL (it is not NULL if it is uninitialized rubbish), it gets strdupped and strdupping a rubbish random string causes the problem. Also, if you look at the commit 1fb7d06, it adds the srcline property into the struct, but not initializing it everywhere needed. Committer notes: Now I see, when using --ignore-callees=do_idle we end up here at line 2189 in add_callchain_ip(): 2181 if (al.sym != NULL) { 2182 if (perf_hpp_list.parent && !*parent && 2183 symbol__match_regex(al.sym, &parent_regex)) 2184 *parent = al.sym; 2185 else if (have_ignore_callees && root_al && 2186 symbol__match_regex(al.sym, &ignore_callees_regex)) { 2187 /* Treat this symbol as the root, 2188 forgetting its callees. */ 2189 *root_al = al; 2190 callchain_cursor_reset(cursor); 2191 } 2192 } And the al that doesn't have the ->srcline field initialized will be copied to the root_al, so then, back to: 1211 int hist_entry_iter__add(struct hist_entry_iter *iter, struct addr_location *al, 1212 int max_stack_depth, void *arg) 1213 { 1214 int err, err2; 1215 struct map *alm = NULL; 1216 1217 if (al) 1218 alm = map__get(al->map); 1219 1220 err = sample__resolve_callchain(iter->sample, &callchain_cursor, &iter->parent, 1221 iter->evsel, al, max_stack_depth); 1222 if (err) { 1223 map__put(alm); 1224 return err; 1225 } 1226 1227 err = iter->ops->prepare_entry(iter, al); 1228 if (err) 1229 goto out; 1230 1231 err = iter->ops->add_single_entry(iter, al); 1232 if (err) 1233 goto out; 1234 That al at line 1221 is what hist_entry_iter__add() (called from sample__resolve_callchain()) saw as 'root_al', and then: iter->ops->add_single_entry(iter, al); will go on with al->srcline with a bogus value, I'll add the above sequence to the cset and apply, thanks! Signed-off-by: Michael Petlan <[email protected]> CC: Milian Wolff <[email protected]> Cc: Jiri Olsa <[email protected]> Fixes: 1fb7d06 ("perf report Use srcline from callchain for hist entries") Link: https //lore.kernel.org/r/[email protected] Reported-by: Juri Lelli <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

FD uses xyarray__entry that may return NULL if an index is out of bounds. If NULL is returned then a segv happens as FD unconditionally dereferences the pointer. This was happening in a case of with perf iostat as shown below. The fix is to make FD an "int*" rather than an int and handle the NULL case as either invalid input or a closed fd. $ sudo gdb --args perf stat --iostat list ... Breakpoint 1, perf_evsel__alloc_fd (evsel=0x5555560951a0, ncpus=1, nthreads=1) at evsel.c:50 50 { (gdb) bt #0 perf_evsel__alloc_fd (evsel=0x5555560951a0, ncpus=1, nthreads=1) at evsel.c:50 thesofproject#1 0x000055555585c188 in evsel__open_cpu (evsel=0x5555560951a0, cpus=0x555556093410, threads=0x555556086fb0, start_cpu=0, end_cpu=1) at util/evsel.c:1792 thesofproject#2 0x000055555585cfb2 in evsel__open (evsel=0x5555560951a0, cpus=0x0, threads=0x555556086fb0) at util/evsel.c:2045 thesofproject#3 0x000055555585d0db in evsel__open_per_thread (evsel=0x5555560951a0, threads=0x555556086fb0) at util/evsel.c:2065 thesofproject#4 0x00005555558ece64 in create_perf_stat_counter (evsel=0x5555560951a0, config=0x555555c34700 <stat_config>, target=0x555555c2f1c0 <target>, cpu=0) at util/stat.c:590 thesofproject#5 0x000055555578e927 in __run_perf_stat (argc=1, argv=0x7fffffffe4a0, run_idx=0) at builtin-stat.c:833 thesofproject#6 0x000055555578f3c6 in run_perf_stat (argc=1, argv=0x7fffffffe4a0, run_idx=0) at builtin-stat.c:1048 thesofproject#7 0x0000555555792ee5 in cmd_stat (argc=1, argv=0x7fffffffe4a0) at builtin-stat.c:2534 thesofproject#8 0x0000555555835ed3 in run_builtin (p=0x555555c3f540 <commands+288>, argc=3, argv=0x7fffffffe4a0) at perf.c:313 thesofproject#9 0x0000555555836154 in handle_internal_command (argc=3, argv=0x7fffffffe4a0) at perf.c:365 thesofproject#10 0x000055555583629f in run_argv (argcp=0x7fffffffe2ec, argv=0x7fffffffe2e0) at perf.c:409 thesofproject#11 0x0000555555836692 in main (argc=3, argv=0x7fffffffe4a0) at perf.c:539 ... (gdb) c Continuing. Error: The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (uncore_iio_0/event=0x83,umask=0x04,ch_mask=0xF,fc_mask=0x07/). /bin/dmesg | grep -i perf may provide additional information. Program received signal SIGSEGV, Segmentation fault. 0x00005555559b03ea in perf_evsel__close_fd_cpu (evsel=0x5555560951a0, cpu=1) at evsel.c:166 166 if (FD(evsel, cpu, thread) >= 0) v3. fixes a bug in perf_evsel__run_ioctl where the sense of a branch was backward. Signed-off-by: Ian Rogers <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

The exit function fixes a memory leak with the src field as detected by leak sanitizer. An example of which is: Indirect leak of 25133184 byte(s) in 207 object(s) allocated from: #0 0x7f199ecfe987 in __interceptor_calloc libsanitizer/asan/asan_malloc_linux.cpp:154 thesofproject#1 0x55defe638224 in annotated_source__alloc_histograms util/annotate.c:803 thesofproject#2 0x55defe6397e4 in symbol__hists util/annotate.c:952 thesofproject#3 0x55defe639908 in symbol__inc_addr_samples util/annotate.c:968 thesofproject#4 0x55defe63aa29 in hist_entry__inc_addr_samples util/annotate.c:1119 thesofproject#5 0x55defe499a79 in hist_iter__report_callback tools/perf/builtin-report.c:182 thesofproject#6 0x55defe7a859d in hist_entry_iter__add util/hist.c:1236 thesofproject#7 0x55defe49aa63 in process_sample_event tools/perf/builtin-report.c:315 thesofproject#8 0x55defe731bc8 in evlist__deliver_sample util/session.c:1473 thesofproject#9 0x55defe731e38 in machines__deliver_event util/session.c:1510 thesofproject#10 0x55defe732a23 in perf_session__deliver_event util/session.c:1590 thesofproject#11 0x55defe72951e in ordered_events__deliver_event util/session.c:183 thesofproject#12 0x55defe740082 in do_flush util/ordered-events.c:244 thesofproject#13 0x55defe7407cb in __ordered_events__flush util/ordered-events.c:323 thesofproject#14 0x55defe740a61 in ordered_events__flush util/ordered-events.c:341 thesofproject#15 0x55defe73837f in __perf_session__process_events util/session.c:2390 thesofproject#16 0x55defe7385ff in perf_session__process_events util/session.c:2420 ... Signed-off-by: Ian Rogers <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Martin Liška <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

In networking lab

A transaction of type BINDER_TYPE_WEAK_HANDLE can fail to increment the reference for a node. In this case, the target proc normally releases the failed reference upon close as expected. However, if the target is dying in parallel the call will race with binder_deferred_release(), so the target could have released all of its references by now leaving the cleanup of the new failed reference unhandled. The transaction then ends and the target proc gets released making the ref->proc now a dangling pointer. Later on, ref->node is closed and we attempt to take spin_lock(&ref->proc->inner_lock), which leads to the use-after-free bug reported below. Let's fix this by cleaning up the failed reference on the spot instead of relying on the target to do so. ================================================================== BUG: KASAN: use-after-free in _raw_spin_lock+0xa8/0x150 Write of size 4 at addr ffff5ca207094238 by task kworker/1:0/590 CPU: 1 PID: 590 Comm: kworker/1:0 Not tainted 5.19.0-rc8 thesofproject#10 Hardware name: linux,dummy-virt (DT) Workqueue: events binder_deferred_func Call trace: dump_backtrace.part.0+0x1d0/0x1e0 show_stack+0x18/0x70 dump_stack_lvl+0x68/0x84 print_report+0x2e4/0x61c kasan_report+0xa4/0x110 kasan_check_range+0xfc/0x1a4 __kasan_check_write+0x3c/0x50 _raw_spin_lock+0xa8/0x150 binder_deferred_func+0x5e0/0x9b0 process_one_work+0x38c/0x5f0 worker_thread+0x9c/0x694 kthread+0x188/0x190 ret_from_fork+0x10/0x20 Acked-by: Christian Brauner (Microsoft) <[email protected]> Signed-off-by: Carlos Llamas <[email protected]> Cc: stable <[email protected]> # 4.14+ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

Fix the following scenario: 1. ethtool -L $IFACE rx 8 tx 96 2. xdpsock -q 10 -t -z Above refers to a case where user would like to attach XSK socket in txonly mode at a queue id that does not have a corresponding Rx queue. At this moment ice's XSK logic is tightly bound to act on a "queue pair", e.g. both Tx and Rx queues at a given queue id are disabled/enabled and both of them will get XSK pool assigned, which is broken for the presented queue configuration. This results in the splat included at the bottom, which is basically an OOB access to Rx ring array. To fix this, allow using the ids only in scope of "combined" queues reported by ethtool. However, logic should be rewritten to allow such configurations later on, which would end up as a complete rewrite of the control path, so let us go with this temporary fix. [420160.558008] BUG: kernel NULL pointer dereference, address: 0000000000000082 [420160.566359] #PF: supervisor read access in kernel mode [420160.572657] #PF: error_code(0x0000) - not-present page [420160.579002] PGD 0 P4D 0 [420160.582756] Oops: 0000 [#1] PREEMPT SMP NOPTI [420160.588396] CPU: 10 PID: 21232 Comm: xdpsock Tainted: G OE 5.19.0-rc7+ thesofproject#10 [420160.597893] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [420160.609894] RIP: 0010:ice_xsk_pool_setup+0x44/0x7d0 [ice] [420160.616968] Code: f3 48 83 ec 40 48 8b 4f 20 48 8b 3f 65 48 8b 04 25 28 00 00 00 48 89 44 24 38 31 c0 48 8d 04 ed 00 00 00 00 48 01 c1 48 8b 11 <0f> b7 92 82 00 00 00 48 85 d2 0f 84 2d 75 00 00 48 8d 72 ff 48 85 [420160.639421] RSP: 0018:ffffc9002d2afd48 EFLAGS: 00010282 [420160.646650] RAX: 0000000000000050 RBX: ffff88811d8bdd00 RCX: ffff888112c14ff8 [420160.655893] RDX: 0000000000000000 RSI: ffff88811d8bdd00 RDI: ffff888109861000 [420160.665166] RBP: 000000000000000a R08: 000000000000000a R09: 0000000000000000 [420160.674493] R10: 000000000000889f R11: 0000000000000000 R12: 000000000000000a [420160.683833] R13: 000000000000000a R14: 0000000000000000 R15: ffff888117611828 [420160.693211] FS: 00007fa869fc1f80(0000) GS:ffff8897e0880000(0000) knlGS:0000000000000000 [420160.703645] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [420160.711783] CR2: 0000000000000082 CR3: 00000001d076c001 CR4: 00000000007706e0 [420160.721399] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [420160.731045] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [420160.740707] PKRU: 55555554 [420160.745960] Call Trace: [420160.750962] <TASK> [420160.755597] ? kmalloc_large_node+0x79/0x90 [420160.762703] ? __kmalloc_node+0x3f5/0x4b0 [420160.769341] xp_assign_dev+0xfd/0x210 [420160.775661] ? shmem_file_read_iter+0x29a/0x420 [420160.782896] xsk_bind+0x152/0x490 [420160.788943] __sys_bind+0xd0/0x100 [420160.795097] ? exit_to_user_mode_prepare+0x20/0x120 [420160.802801] __x64_sys_bind+0x16/0x20 [420160.809298] do_syscall_64+0x38/0x90 [420160.815741] entry_SYSCALL_64_after_hwframe+0x63/0xcd [420160.823731] RIP: 0033:0x7fa86a0dd2fb [420160.830264] Code: c3 66 0f 1f 44 00 00 48 8b 15 69 8b 0c 00 f7 d8 64 89 02 b8 ff ff ff ff eb bc 0f 1f 44 00 00 f3 0f 1e fa b8 31 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 3d 8b 0c 00 f7 d8 64 89 01 48 [420160.855410] RSP: 002b:00007ffc1146f618 EFLAGS: 00000246 ORIG_RAX: 0000000000000031 [420160.866366] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fa86a0dd2fb [420160.876957] RDX: 0000000000000010 RSI: 00007ffc1146f680 RDI: 0000000000000003 [420160.887604] RBP: 000055d7113a0520 R08: 00007fa868fb8000 R09: 0000000080000000 [420160.898293] R10: 0000000000008001 R11: 0000000000000246 R12: 000055d7113a04e0 [420160.909038] R13: 000055d7113a0320 R14: 000000000000000a R15: 0000000000000000 [420160.919817] </TASK> [420160.925659] Modules linked in: ice(OE) af_packet binfmt_misc nls_iso8859_1 ipmi_ssif intel_rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp mei_me coretemp ioatdma mei ipmi_si wmi ipmi_msghandler acpi_pad acpi_power_meter ip_tables x_tables autofs4 ixgbe i40e crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd ahci mdio dca libahci lpc_ich [last unloaded: ice] [420160.977576] CR2: 0000000000000082 [420160.985037] ---[ end trace 0000000000000000 ]--- [420161.097724] RIP: 0010:ice_xsk_pool_setup+0x44/0x7d0 [ice] [420161.107341] Code: f3 48 83 ec 40 48 8b 4f 20 48 8b 3f 65 48 8b 04 25 28 00 00 00 48 89 44 24 38 31 c0 48 8d 04 ed 00 00 00 00 48 01 c1 48 8b 11 <0f> b7 92 82 00 00 00 48 85 d2 0f 84 2d 75 00 00 48 8d 72 ff 48 85 [420161.134741] RSP: 0018:ffffc9002d2afd48 EFLAGS: 00010282 [420161.144274] RAX: 0000000000000050 RBX: ffff88811d8bdd00 RCX: ffff888112c14ff8 [420161.155690] RDX: 0000000000000000 RSI: ffff88811d8bdd00 RDI: ffff888109861000 [420161.168088] RBP: 000000000000000a R08: 000000000000000a R09: 0000000000000000 [420161.179295] R10: 000000000000889f R11: 0000000000000000 R12: 000000000000000a [420161.190420] R13: 000000000000000a R14: 0000000000000000 R15: ffff888117611828 [420161.201505] FS: 00007fa869fc1f80(0000) GS:ffff8897e0880000(0000) knlGS:0000000000000000 [420161.213628] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [420161.223413] CR2: 0000000000000082 CR3: 00000001d076c001 CR4: 00000000007706e0 [420161.234653] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [420161.245893] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [420161.257052] PKRU: 55555554 Fixes: 2d4238f ("ice: Add support for AF_XDP") Signed-off-by: Maciej Fijalkowski <[email protected]> Tested-by: George Kuruvinakunnel <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>

[ Upstream commit 97f88a3 ] I found a null pointer reference in arch_prepare_kprobe(): # echo 'p cmdline_proc_show' > kprobe_events # echo 'p cmdline_proc_show+16' >> kprobe_events Kernel attempted to read user page (0) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on read at 0x00000000 Faulting instruction address: 0xc000000000050bfc Oops: Kernel access of bad area, sig: 11 [thesofproject#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: CPU: 0 PID: 122 Comm: sh Not tainted 6.0.0-rc3-00007-gdcf8e5633e2e thesofproject#10 NIP: c000000000050bfc LR: c000000000050bec CTR: 0000000000005bdc REGS: c0000000348475b0 TRAP: 0300 Not tainted (6.0.0-rc3-00007-gdcf8e5633e2e) MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 88002444 XER: 20040006 CFAR: c00000000022d100 DAR: 0000000000000000 DSISR: 40000000 IRQMASK: 0 ... NIP arch_prepare_kprobe+0x10c/0x2d0 LR arch_prepare_kprobe+0xfc/0x2d0 Call Trace: 0xc0000000012f77a0 (unreliable) register_kprobe+0x3c0/0x7a0 __register_trace_kprobe+0x140/0x1a0 __trace_kprobe_create+0x794/0x1040 trace_probe_create+0xc4/0xe0 create_or_delete_trace_kprobe+0x2c/0x80 trace_parse_run_command+0xf0/0x210 probes_write+0x20/0x40 vfs_write+0xfc/0x450 ksys_write+0x84/0x140 system_call_exception+0x17c/0x3a0 system_call_vectored_common+0xe8/0x278 --- interrupt: 3000 at 0x7fffa5682de0 NIP: 00007fffa5682de0 LR: 0000000000000000 CTR: 0000000000000000 REGS: c000000034847e80 TRAP: 3000 Not tainted (6.0.0-rc3-00007-gdcf8e5633e2e) MSR: 900000000280f033 <SF,HV,VEC,VSX,EE,PR,FP,ME,IR,DR,RI,LE> CR: 44002408 XER: 00000000 The address being probed has some special: cmdline_proc_show: Probe based on ftrace cmdline_proc_show+16: Probe for the next instruction at the ftrace location The ftrace-based kprobe does not generate kprobe::ainsn::insn, it gets set to NULL. In arch_prepare_kprobe() it will check for: ... prev = get_kprobe(p->addr - 1); preempt_enable_no_resched(); if (prev && ppc_inst_prefixed(ppc_inst_read(prev->ainsn.insn))) { ... If prev is based on ftrace, 'ppc_inst_read(prev->ainsn.insn)' will occur with a null pointer reference. At this point prev->addr will not be a prefixed instruction, so the check can be skipped. Check if prev is ftrace-based kprobe before reading 'prev->ainsn.insn' to fix this problem. Fixes: b4657f7 ("powerpc/kprobes: Don't allow breakpoints on suffixes") Signed-off-by: Li Huafei <[email protected]> [mpe: Trim oops] Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>

We need to check if we have a OS prefix, otherwise we stumble on a metric segv that I'm now seeing in Arnaldo's tree: $ gdb --args perf stat -M Backend true ... Performance counter stats for 'true': 4,712,355 TOPDOWN.SLOTS # 17.3 % tma_core_bound Program received signal SIGSEGV, Segmentation fault. __strlen_evex () at ../sysdeps/x86_64/multiarch/strlen-evex.S:77 77 ../sysdeps/x86_64/multiarch/strlen-evex.S: No such file or directory. (gdb) bt #0 __strlen_evex () at ../sysdeps/x86_64/multiarch/strlen-evex.S:77 thesofproject#1 0x00007ffff74749a5 in __GI__IO_fputs (str=0x0, fp=0x7ffff75f5680 <_IO_2_1_stderr_>) thesofproject#2 0x0000555555779f28 in do_new_line_std (config=0x555555e077c0 <stat_config>, os=0x7fffffffbf10) at util/stat-display.c:356 thesofproject#3 0x000055555577a081 in print_metric_std (config=0x555555e077c0 <stat_config>, ctx=0x7fffffffbf10, color=0x0, fmt=0x5555558b77b5 "%8.1f", unit=0x7fffffffbb10 "% tma_memory_bound", val=13.165355724442199) at util/stat-display.c:380 thesofproject#4 0x00005555557768b6 in generic_metric (config=0x555555e077c0 <stat_config>, metric_expr=0x55555593d5b7 "((CYCLE_ACTIVITY.STALLS_MEM_ANY + EXE_ACTIVITY.BOUND_ON_STORES) / (CYCLE_ACTIVITY.STALLS_TOTAL + (EXE_ACTIVITY.1_PORTS_UTIL + tma_retiring * EXE_ACTIVITY.2_PORTS_UTIL) + EXE_ACTIVITY.BOUND_ON_STORES))"..., metric_events=0x555555f334e0, metric_refs=0x555555ec81d0, name=0x555555f32e80 "TOPDOWN.SLOTS", metric_name=0x555555f26c80 "tma_memory_bound", metric_unit=0x55555593d5b1 "100%", runtime=0, map_idx=0, out=0x7fffffffbd90, st=0x555555e9e620 <rt_stat>) at util/stat-shadow.c:934 thesofproject#5 0x0000555555778cac in perf_stat__print_shadow_stats (config=0x555555e077c0 <stat_config>, evsel=0x555555f289d0, avg=4712355, map_idx=0, out=0x7fffffffbd90, metric_events=0x555555e078e8 <stat_config+296>, st=0x555555e9e620 <rt_stat>) at util/stat-shadow.c:1329 thesofproject#6 0x000055555577b6a0 in printout (config=0x555555e077c0 <stat_config>, os=0x7fffffffbf10, uval=4712355, run=325322, ena=325322, noise=4712355, map_idx=0) at util/stat-display.c:741 thesofproject#7 0x000055555577bc74 in print_counter_aggrdata (config=0x555555e077c0 <stat_config>, counter=0x555555f289d0, s=0, os=0x7fffffffbf10) at util/stat-display.c:838 thesofproject#8 0x000055555577c1d8 in print_counter (config=0x555555e077c0 <stat_config>, counter=0x555555f289d0, os=0x7fffffffbf10) at util/stat-display.c:957 thesofproject#9 0x000055555577dba0 in evlist__print_counters (evlist=0x555555ec3610, config=0x555555e077c0 <stat_config>, _target=0x555555e01c80 <target>, ts=0x0, argc=1, argv=0x7fffffffe450) at util/stat-display.c:1413 thesofproject#10 0x00005555555fc821 in print_counters (ts=0x0, argc=1, argv=0x7fffffffe450) at builtin-stat.c:1040 thesofproject#11 0x000055555560091a in cmd_stat (argc=1, argv=0x7fffffffe450) at builtin-stat.c:2665 thesofproject#12 0x00005555556b1eea in run_builtin (p=0x555555e11f70 <commands+336>, argc=4, argv=0x7fffffffe450) at perf.c:322 thesofproject#13 0x00005555556b2181 in handle_internal_command (argc=4, argv=0x7fffffffe450) at perf.c:376 thesofproject#14 0x00005555556b22d7 in run_argv (argcp=0x7fffffffe27c, argv=0x7fffffffe270) at perf.c:420 thesofproject#15 0x00005555556b26ef in main (argc=4, argv=0x7fffffffe450) at perf.c:550 (gdb) Fixes: f123b2d ("perf stat: Remove prefix argument in print_metric_headers()") Signed-off-by: Ian Rogers <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Athira Jajeev <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Xing Zhengjun <[email protected]> Link: http://lore.kernel.org/lkml/CAP-5=fUOjSM5HajU9TCD6prY39LbX4OQbkEbtKPPGRBPBN=_VQ@mail.gmail.com Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

[ Upstream commit 93c660c ] ASAN reports an use-after-free in btf_dump_name_dups: ERROR: AddressSanitizer: heap-use-after-free on address 0xffff927006db at pc 0xaaaab5dfb618 bp 0xffffdd89b890 sp 0xffffdd89b928 READ of size 2 at 0xffff927006db thread T0 #0 0xaaaab5dfb614 in __interceptor_strcmp.part.0 (test_progs+0x21b614) thesofproject#1 0xaaaab635f144 in str_equal_fn tools/lib/bpf/btf_dump.c:127 thesofproject#2 0xaaaab635e3e0 in hashmap_find_entry tools/lib/bpf/hashmap.c:143 thesofproject#3 0xaaaab635e72c in hashmap__find tools/lib/bpf/hashmap.c:212 thesofproject#4 0xaaaab6362258 in btf_dump_name_dups tools/lib/bpf/btf_dump.c:1525 thesofproject#5 0xaaaab636240c in btf_dump_resolve_name tools/lib/bpf/btf_dump.c:1552 thesofproject#6 0xaaaab6362598 in btf_dump_type_name tools/lib/bpf/btf_dump.c:1567 thesofproject#7 0xaaaab6360b48 in btf_dump_emit_struct_def tools/lib/bpf/btf_dump.c:912 thesofproject#8 0xaaaab6360630 in btf_dump_emit_type tools/lib/bpf/btf_dump.c:798 thesofproject#9 0xaaaab635f720 in btf_dump__dump_type tools/lib/bpf/btf_dump.c:282 thesofproject#10 0xaaaab608523c in test_btf_dump_incremental tools/testing/selftests/bpf/prog_tests/btf_dump.c:236 thesofproject#11 0xaaaab6097530 in test_btf_dump tools/testing/selftests/bpf/prog_tests/btf_dump.c:875 thesofproject#12 0xaaaab6314ed0 in run_one_test tools/testing/selftests/bpf/test_progs.c:1062 thesofproject#13 0xaaaab631a0a8 in main tools/testing/selftests/bpf/test_progs.c:1697 thesofproject#14 0xffff9676d214 in __libc_start_main ../csu/libc-start.c:308 thesofproject#15 0xaaaab5d65990 (test_progs+0x185990) 0xffff927006db is located 11 bytes inside of 16-byte region [0xffff927006d0,0xffff927006e0) freed by thread T0 here: #0 0xaaaab5e2c7c4 in realloc (test_progs+0x24c7c4) thesofproject#1 0xaaaab634f4a0 in libbpf_reallocarray tools/lib/bpf/libbpf_internal.h:191 thesofproject#2 0xaaaab634f840 in libbpf_add_mem tools/lib/bpf/btf.c:163 thesofproject#3 0xaaaab636643c in strset_add_str_mem tools/lib/bpf/strset.c:106 thesofproject#4 0xaaaab6366560 in strset__add_str tools/lib/bpf/strset.c:157 thesofproject#5 0xaaaab6352d70 in btf__add_str tools/lib/bpf/btf.c:1519 thesofproject#6 0xaaaab6353e10 in btf__add_field tools/lib/bpf/btf.c:2032 thesofproject#7 0xaaaab6084fcc in test_btf_dump_incremental tools/testing/selftests/bpf/prog_tests/btf_dump.c:232 thesofproject#8 0xaaaab6097530 in test_btf_dump tools/testing/selftests/bpf/prog_tests/btf_dump.c:875 thesofproject#9 0xaaaab6314ed0 in run_one_test tools/testing/selftests/bpf/test_progs.c:1062 thesofproject#10 0xaaaab631a0a8 in main tools/testing/selftests/bpf/test_progs.c:1697 thesofproject#11 0xffff9676d214 in __libc_start_main ../csu/libc-start.c:308 thesofproject#12 0xaaaab5d65990 (test_progs+0x185990) previously allocated by thread T0 here: #0 0xaaaab5e2c7c4 in realloc (test_progs+0x24c7c4) thesofproject#1 0xaaaab634f4a0 in libbpf_reallocarray tools/lib/bpf/libbpf_internal.h:191 thesofproject#2 0xaaaab634f840 in libbpf_add_mem tools/lib/bpf/btf.c:163 thesofproject#3 0xaaaab636643c in strset_add_str_mem tools/lib/bpf/strset.c:106 thesofproject#4 0xaaaab6366560 in strset__add_str tools/lib/bpf/strset.c:157 thesofproject#5 0xaaaab6352d70 in btf__add_str tools/lib/bpf/btf.c:1519 thesofproject#6 0xaaaab6353ff0 in btf_add_enum_common tools/lib/bpf/btf.c:2070 thesofproject#7 0xaaaab6354080 in btf__add_enum tools/lib/bpf/btf.c:2102 thesofproject#8 0xaaaab6082f50 in test_btf_dump_incremental tools/testing/selftests/bpf/prog_tests/btf_dump.c:162 thesofproject#9 0xaaaab6097530 in test_btf_dump tools/testing/selftests/bpf/prog_tests/btf_dump.c:875 thesofproject#10 0xaaaab6314ed0 in run_one_test tools/testing/selftests/bpf/test_progs.c:1062 thesofproject#11 0xaaaab631a0a8 in main tools/testing/selftests/bpf/test_progs.c:1697 thesofproject#12 0xffff9676d214 in __libc_start_main ../csu/libc-start.c:308 thesofproject#13 0xaaaab5d65990 (test_progs+0x185990) The reason is that the key stored in hash table name_map is a string address, and the string memory is allocated by realloc() function, when the memory is resized by realloc() later, the old memory may be freed, so the address stored in name_map references to a freed memory, causing use-after-free. Fix it by storing duplicated string address in name_map. Fixes: 919d2b1 ("libbpf: Allow modification of BTF and add btf__add_str API") Signed-off-by: Xu Kuohai <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Martin KaFai Lau <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>

…g the sock [ Upstream commit 3cf7203 ] There is a race condition in vxlan that when deleting a vxlan device during receiving packets, there is a possibility that the sock is released after getting vxlan_sock vs from sk_user_data. Then in later vxlan_ecn_decapsulate(), vxlan_get_sk_family() we will got NULL pointer dereference. e.g. #0 [ffffa25ec6978a38] machine_kexec at ffffffff8c669757 thesofproject#1 [ffffa25ec6978a90] __crash_kexec at ffffffff8c7c0a4d thesofproject#2 [ffffa25ec6978b58] crash_kexec at ffffffff8c7c1c48 thesofproject#3 [ffffa25ec6978b60] oops_end at ffffffff8c627f2b thesofproject#4 [ffffa25ec6978b80] page_fault_oops at ffffffff8c678fcb thesofproject#5 [ffffa25ec6978bd8] exc_page_fault at ffffffff8d109542 thesofproject#6 [ffffa25ec6978c00] asm_exc_page_fault at ffffffff8d200b62 [exception RIP: vxlan_ecn_decapsulate+0x3b] RIP: ffffffffc1014e7b RSP: ffffa25ec6978cb0 RFLAGS: 00010246 RAX: 0000000000000008 RBX: ffff8aa000888000 RCX: 0000000000000000 RDX: 000000000000000e RSI: ffff8a9fc7ab803e RDI: ffff8a9fd1168700 RBP: ffff8a9fc7ab803e R8: 0000000000700000 R9: 00000000000010ae R10: ffff8a9fcb748980 R11: 0000000000000000 R12: ffff8a9fd1168700 R13: ffff8aa000888000 R14: 00000000002a0000 R15: 00000000000010ae ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 thesofproject#7 [ffffa25ec6978ce8] vxlan_rcv at ffffffffc10189cd [vxlan] thesofproject#8 [ffffa25ec6978d90] udp_queue_rcv_one_skb at ffffffff8cfb6507 thesofproject#9 [ffffa25ec6978dc0] udp_unicast_rcv_skb at ffffffff8cfb6e45 thesofproject#10 [ffffa25ec6978dc8] __udp4_lib_rcv at ffffffff8cfb8807 thesofproject#11 [ffffa25ec6978e20] ip_protocol_deliver_rcu at ffffffff8cf76951 thesofproject#12 [ffffa25ec6978e48] ip_local_deliver at ffffffff8cf76bde thesofproject#13 [ffffa25ec6978ea0] __netif_receive_skb_one_core at ffffffff8cecde9b thesofproject#14 [ffffa25ec6978ec8] process_backlog at ffffffff8cece139 thesofproject#15 [ffffa25ec6978f00] __napi_poll at ffffffff8ceced1a thesofproject#16 [ffffa25ec6978f28] net_rx_action at ffffffff8cecf1f3 thesofproject#17 [ffffa25ec6978fa0] __softirqentry_text_start at ffffffff8d4000ca thesofproject#18 [ffffa25ec6978ff0] do_softirq at ffffffff8c6fbdc3 Reproducer: https://github.com/Mellanox/ovs-tests/blob/master/test-ovs-vxlan-remove-tunnel-during-traffic.sh Fix this by waiting for all sk_user_data reader to finish before releasing the sock. Reported-by: Jianlin Shi <[email protected]> Suggested-by: Jakub Sitnicki <[email protected]> Fixes: 6a93cc9 ("udp-tunnel: Add a few more UDP tunnel APIs") Signed-off-by: Hangbin Liu <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

…ata and not linked with libtraceevent When we have a perf.data file with tracepoints, such as: # perf evlist -f probe_perf:lzma_decompress_to_file # Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events # We end up segfaulting when using perf built with NO_LIBTRACEEVENT=1 by trying to find an evsel with a NULL 'event_name' variable: (gdb) run report --stdio -f Starting program: /root/bin/perf report --stdio -f Program received signal SIGSEGV, Segmentation fault. 0x000000000055219d in find_evsel (evlist=0xfda7b0, event_name=0x0) at util/sort.c:2830 warning: Source file is more recent than executable. 2830 if (event_name[0] == '%') { Missing separate debuginfos, use: dnf debuginfo-install bzip2-libs-1.0.8-11.fc36.x86_64 cyrus-sasl-lib-2.1.27-18.fc36.x86_64 elfutils-debuginfod-client-0.188-3.fc36.x86_64 elfutils-libelf-0.188-3.fc36.x86_64 elfutils-libs-0.188-3.fc36.x86_64 glibc-2.35-20.fc36.x86_64 keyutils-libs-1.6.1-4.fc36.x86_64 krb5-libs-1.19.2-12.fc36.x86_64 libbrotli-1.0.9-7.fc36.x86_64 libcap-2.48-4.fc36.x86_64 libcom_err-1.46.5-2.fc36.x86_64 libcurl-7.82.0-12.fc36.x86_64 libevent-2.1.12-6.fc36.x86_64 libgcc-12.2.1-4.fc36.x86_64 libidn2-2.3.4-1.fc36.x86_64 libnghttp2-1.51.0-1.fc36.x86_64 libpsl-0.21.1-5.fc36.x86_64 libselinux-3.3-4.fc36.x86_64 libssh-0.9.6-4.fc36.x86_64 libstdc++-12.2.1-4.fc36.x86_64 libunistring-1.0-1.fc36.x86_64 libunwind-1.6.2-2.fc36.x86_64 libxcrypt-4.4.33-4.fc36.x86_64 libzstd-1.5.2-2.fc36.x86_64 numactl-libs-2.0.14-5.fc36.x86_64 opencsd-1.2.0-1.fc36.x86_64 openldap-2.6.3-1.fc36.x86_64 openssl-libs-3.0.5-2.fc36.x86_64 slang-2.3.2-11.fc36.x86_64 xz-libs-5.2.5-9.fc36.x86_64 zlib-1.2.11-33.fc36.x86_64 (gdb) bt #0 0x000000000055219d in find_evsel (evlist=0xfda7b0, event_name=0x0) at util/sort.c:2830 thesofproject#1 0x0000000000552416 in add_dynamic_entry (evlist=0xfda7b0, tok=0xffb6eb "trace", level=2) at util/sort.c:2976 thesofproject#2 0x0000000000552d26 in sort_dimension__add (list=0xf93e00 <perf_hpp_list>, tok=0xffb6eb "trace", evlist=0xfda7b0, level=2) at util/sort.c:3193 thesofproject#3 0x0000000000552e1c in setup_sort_list (list=0xf93e00 <perf_hpp_list>, str=0xffb6eb "trace", evlist=0xfda7b0) at util/sort.c:3227 thesofproject#4 0x00000000005532fa in __setup_sorting (evlist=0xfda7b0) at util/sort.c:3381 thesofproject#5 0x0000000000553cdc in setup_sorting (evlist=0xfda7b0) at util/sort.c:3608 thesofproject#6 0x000000000042eb9f in cmd_report (argc=0, argv=0x7fffffffe470) at builtin-report.c:1596 thesofproject#7 0x00000000004aee7e in run_builtin (p=0xf64ca0 <commands+288>, argc=3, argv=0x7fffffffe470) at perf.c:330 thesofproject#8 0x00000000004af0f2 in handle_internal_command (argc=3, argv=0x7fffffffe470) at perf.c:384 thesofproject#9 0x00000000004af241 in run_argv (argcp=0x7fffffffe29c, argv=0x7fffffffe290) at perf.c:428 thesofproject#10 0x00000000004af5fc in main (argc=3, argv=0x7fffffffe470) at perf.c:562 (gdb) So check if we have tracepoint events in add_dynamic_entry() and bail out instead: # perf report --stdio -f This perf binary isn't linked with libtraceevent, can't process probe_perf:lzma_decompress_to_file Error: Unknown --sort key: `trace' # Fixes: 378ef0f ("perf build: Use libtraceevent from the system") Acked-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

When running kfence_test, I found some testcases failed like this: # test_out_of_bounds_read: EXPECTATION FAILED at mm/kfence/kfence_test.c:346 Expected report_matches(&expect) to be true, but is false not ok 1 - test_out_of_bounds_read The corresponding call-trace is: BUG: KFENCE: out-of-bounds read in kunit_try_run_case+0x38/0x84 Out-of-bounds read at 0x(____ptrval____) (32B right of kfence-thesofproject#10): kunit_try_run_case+0x38/0x84 kunit_generic_run_threadfn_adapter+0x12/0x1e kthread+0xc8/0xde ret_from_exception+0x0/0xc The kfence_test using the first frame of call trace to check whether the testcase is succeed or not. Commit 6a00ef4 ("riscv: eliminate unreliable __builtin_frame_address(1)") skip first frame for all case, which results the kfence_test failed. Indeed, we only need to skip the first frame for case (task==NULL || task==current). With this patch, the call-trace will be: BUG: KFENCE: out-of-bounds read in test_out_of_bounds_read+0x88/0x19e Out-of-bounds read at 0x(____ptrval____) (1B left of kfence-thesofproject#7): test_out_of_bounds_read+0x88/0x19e kunit_try_run_case+0x38/0x84 kunit_generic_run_threadfn_adapter+0x12/0x1e kthread+0xc8/0xde ret_from_exception+0x0/0xc Fixes: 6a00ef4 ("riscv: eliminate unreliable __builtin_frame_address(1)") Signed-off-by: Liu Shixin <[email protected]> Tested-by: Samuel Holland <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Palmer Dabbelt <[email protected]>

Sai Krishna says: ==================== octeontx2: Miscellaneous fixes This patchset includes following fixes. Patch #1 Fix for the race condition while updating APR table Patch #2 Fix end bit position in NPC scan config Patch #3 Fix depth of CAM, MEM table entries Patch #4 Fix in increase the size of DMAC filter flows Patch #5 Fix driver crash resulting from invalid interface type information retrieved from firmware Patch #6 Fix incorrect mask used while installing filters involving fragmented packets Patch #7 Fixes for NPC field hash extract w.r.t IPV6 hash reduction, IPV6 filed hash configuration. Patch #8 Fix for NPC hardware parser configuration destination address hash, IPV6 endianness issues. Patch #9 Fix for skipping mbox initialization for PFs disabled by firmware. Patch #10 Fix disabling packet I/O in case of mailbox timeout. Patch #11 Fix detaching LF resources in case of VF probe fail. ==================== Signed-off-by: David S. Miller <[email protected]>

The cited commit adds a compeletion to remove dependency on rtnl lock. But it causes a deadlock for multiple encapsulations: crash> bt ffff8aece8a64000 PID: 1514557 TASK: ffff8aece8a64000 CPU: 3 COMMAND: "tc" #0 [ffffa6d14183f368] __schedule at ffffffffb8ba7f45 #1 [ffffa6d14183f3f8] schedule at ffffffffb8ba8418 #2 [ffffa6d14183f418] schedule_preempt_disabled at ffffffffb8ba8898 #3 [ffffa6d14183f428] __mutex_lock at ffffffffb8baa7f8 #4 [ffffa6d14183f4d0] mutex_lock_nested at ffffffffb8baabeb #5 [ffffa6d14183f4e0] mlx5e_attach_encap at ffffffffc0f48c17 [mlx5_core] #6 [ffffa6d14183f628] mlx5e_tc_add_fdb_flow at ffffffffc0f39680 [mlx5_core] #7 [ffffa6d14183f688] __mlx5e_add_fdb_flow at ffffffffc0f3b636 [mlx5_core] #8 [ffffa6d14183f6f0] mlx5e_tc_add_flow at ffffffffc0f3bcdf [mlx5_core] #9 [ffffa6d14183f728] mlx5e_configure_flower at ffffffffc0f3c1d1 [mlx5_core] #10 [ffffa6d14183f790] mlx5e_rep_setup_tc_cls_flower at ffffffffc0f3d529 [mlx5_core] #11 [ffffa6d14183f7a0] mlx5e_rep_setup_tc_cb at ffffffffc0f3d714 [mlx5_core] #12 [ffffa6d14183f7b0] tc_setup_cb_add at ffffffffb8931bb8 #13 [ffffa6d14183f810] fl_hw_replace_filter at ffffffffc0dae901 [cls_flower] #14 [ffffa6d14183f8d8] fl_change at ffffffffc0db5c57 [cls_flower] #15 [ffffa6d14183f970] tc_new_tfilter at ffffffffb8936047 #16 [ffffa6d14183fac8] rtnetlink_rcv_msg at ffffffffb88c7c31 #17 [ffffa6d14183fb50] netlink_rcv_skb at ffffffffb8942853 #18 [ffffa6d14183fbc0] rtnetlink_rcv at ffffffffb88c1835 #19 [ffffa6d14183fbd0] netlink_unicast at ffffffffb8941f27 #20 [ffffa6d14183fc18] netlink_sendmsg at ffffffffb8942245 #21 [ffffa6d14183fc98] sock_sendmsg at ffffffffb887d482 #22 [ffffa6d14183fcb8] ____sys_sendmsg at ffffffffb887d81a #23 [ffffa6d14183fd38] ___sys_sendmsg at ffffffffb88806e2 #24 [ffffa6d14183fe90] __sys_sendmsg at ffffffffb88807a2 #25 [ffffa6d14183ff28] __x64_sys_sendmsg at ffffffffb888080f #26 [ffffa6d14183ff38] do_syscall_64 at ffffffffb8b9b6a8 #27 [ffffa6d14183ff50] entry_SYSCALL_64_after_hwframe at ffffffffb8c0007c crash> bt 0xffff8aeb07544000 PID: 1110766 TASK: ffff8aeb07544000 CPU: 0 COMMAND: "kworker/u20:9" #0 [ffffa6d14e6b7bd8] __schedule at ffffffffb8ba7f45 #1 [ffffa6d14e6b7c68] schedule at ffffffffb8ba8418 #2 [ffffa6d14e6b7c88] schedule_timeout at ffffffffb8baef88 #3 [ffffa6d14e6b7d10] wait_for_completion at ffffffffb8ba968b #4 [ffffa6d14e6b7d60] mlx5e_take_all_encap_flows at ffffffffc0f47ec4 [mlx5_core] #5 [ffffa6d14e6b7da0] mlx5e_rep_update_flows at ffffffffc0f3e734 [mlx5_core] #6 [ffffa6d14e6b7df8] mlx5e_rep_neigh_update at ffffffffc0f400bb [mlx5_core] #7 [ffffa6d14e6b7e50] process_one_work at ffffffffb80acc9c #8 [ffffa6d14e6b7ed0] worker_thread at ffffffffb80ad012 #9 [ffffa6d14e6b7f10] kthread at ffffffffb80b615d #10 [ffffa6d14e6b7f50] ret_from_fork at ffffffffb8001b2f After the first encap is attached, flow will be added to encap entry's flows list. If neigh update is running at this time, the following encaps of the flow can't hold the encap_tbl_lock and sleep. If neigh update thread is waiting for that flow's init_done, deadlock happens. Fix it by holding lock outside of the for loop. If neigh update is running, prevent encap flows from offloading. Since the lock is held outside of the for loop, concurrent creation of encap entries is not allowed. So remove unnecessary wait_for_completion call for res_ready. Fixes: 95435ad ("net/mlx5e: Only access fully initialized flows in neigh update") Signed-off-by: Chris Mi <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Reviewed-by: Vlad Buslov <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>

Currently, the per cpu upcall counters are allocated after the vport is created and inserted into the system. This could lead to the datapath accessing the counters before they are allocated resulting in a kernel Oops. Here is an example: PID: 59693 TASK: ffff0005f4f51500 CPU: 0 COMMAND: "ovs-vswitchd" #0 [ffff80000a39b5b0] __switch_to at ffffb70f0629f2f4 #1 [ffff80000a39b5d0] __schedule at ffffb70f0629f5cc #2 [ffff80000a39b650] preempt_schedule_common at ffffb70f0629fa60 #3 [ffff80000a39b670] dynamic_might_resched at ffffb70f0629fb58 #4 [ffff80000a39b680] mutex_lock_killable at ffffb70f062a1388 #5 [ffff80000a39b6a0] pcpu_alloc at ffffb70f0594460c #6 [ffff80000a39b750] __alloc_percpu_gfp at ffffb70f05944e68 #7 [ffff80000a39b760] ovs_vport_cmd_new at ffffb70ee6961b90 [openvswitch] ... PID: 58682 TASK: ffff0005b2f0bf00 CPU: 0 COMMAND: "kworker/0:3" #0 [ffff80000a5d2f40] machine_kexec at ffffb70f056a0758 #1 [ffff80000a5d2f70] __crash_kexec at ffffb70f057e2994 #2 [ffff80000a5d3100] crash_kexec at ffffb70f057e2ad8 #3 [ffff80000a5d3120] die at ffffb70f0628234c #4 [ffff80000a5d31e0] die_kernel_fault at ffffb70f062828a8 #5 [ffff80000a5d3210] __do_kernel_fault at ffffb70f056a31f4 #6 [ffff80000a5d3240] do_bad_area at ffffb70f056a32a4 #7 [ffff80000a5d3260] do_translation_fault at ffffb70f062a9710 #8 [ffff80000a5d3270] do_mem_abort at ffffb70f056a2f74 #9 [ffff80000a5d32a0] el1_abort at ffffb70f06297dac #10 [ffff80000a5d32d0] el1h_64_sync_handler at ffffb70f06299b24 #11 [ffff80000a5d3410] el1h_64_sync at ffffb70f056812dc #12 [ffff80000a5d3430] ovs_dp_upcall at ffffb70ee6963c84 [openvswitch] #13 [ffff80000a5d3470] ovs_dp_process_packet at ffffb70ee6963fdc [openvswitch] #14 [ffff80000a5d34f0] ovs_vport_receive at ffffb70ee6972c78 [openvswitch] #15 [ffff80000a5d36f0] netdev_port_receive at ffffb70ee6973948 [openvswitch] #16 [ffff80000a5d3720] netdev_frame_hook at ffffb70ee6973a28 [openvswitch] #17 [ffff80000a5d3730] __netif_receive_skb_core.constprop.0 at ffffb70f06079f90 We moved the per cpu upcall counter allocation to the existing vport alloc and free functions to solve this. Fixes: 95637d9 ("net: openvswitch: release vport resources on failure") Fixes: 1933ea3 ("net: openvswitch: Add support to count upcall packets") Signed-off-by: Eelco Chaudron <[email protected]> Reviewed-by: Simon Horman <[email protected]> Acked-by: Aaron Conole <[email protected]> Signed-off-by: David S. Miller <[email protected]>

Merge series from Richard Fitzgerald <[email protected]>: This set of patches adds support for using the CS35L56 boosted smart amplifier on HDA systems. In these systems the CS35L56 audio is routed through a HDA-to-I2S bridge codec. This doesn't include the changes to the Realtek driver to actually hook up the CS35L56 driver, because we don't yet have the QUIRK IDs to associate it with. But we want to publish the driver now so that it is available for bringing up hardware with the CS35L56. The first 9 patches are moving code out of the ASoC driver and into the shared library so that it can be shared with the HDA driver. Patch #10 fixes missing #includes in the HDA headers so that the CS35L56 driver doesn't have to #include headers that it doesn't use.

The cited commit holds encap tbl lock unconditionally when setting up dests. But it may cause the following deadlock: PID: 1063722 TASK: ffffa062ca5d0000 CPU: 13 COMMAND: "handler8" #0 [ffffb14de05b7368] __schedule at ffffffffa1d5aa91 #1 [ffffb14de05b7410] schedule at ffffffffa1d5afdb #2 [ffffb14de05b7430] schedule_preempt_disabled at ffffffffa1d5b528 #3 [ffffb14de05b7440] __mutex_lock at ffffffffa1d5d6cb #4 [ffffb14de05b74e8] mutex_lock_nested at ffffffffa1d5ddeb #5 [ffffb14de05b74f8] mlx5e_tc_tun_encap_dests_set at ffffffffc12f2096 [mlx5_core] #6 [ffffb14de05b7568] post_process_attr at ffffffffc12d9fc5 [mlx5_core] #7 [ffffb14de05b75a0] mlx5e_tc_add_fdb_flow at ffffffffc12de877 [mlx5_core] #8 [ffffb14de05b75f0] __mlx5e_add_fdb_flow at ffffffffc12e0eef [mlx5_core] #9 [ffffb14de05b7660] mlx5e_tc_add_flow at ffffffffc12e12f7 [mlx5_core] #10 [ffffb14de05b76b8] mlx5e_configure_flower at ffffffffc12e1686 [mlx5_core] #11 [ffffb14de05b7720] mlx5e_rep_indr_offload at ffffffffc12e3817 [mlx5_core] #12 [ffffb14de05b7730] mlx5e_rep_indr_setup_tc_cb at ffffffffc12e388a [mlx5_core] #13 [ffffb14de05b7740] tc_setup_cb_add at ffffffffa1ab2ba8 #14 [ffffb14de05b77a0] fl_hw_replace_filter at ffffffffc0bdec2f [cls_flower] #15 [ffffb14de05b7868] fl_change at ffffffffc0be6caa [cls_flower] #16 [ffffb14de05b7908] tc_new_tfilter at ffffffffa1ab71f0 [1031218.028143] wait_for_completion+0x24/0x30 [1031218.028589] mlx5e_update_route_decap_flows+0x9a/0x1e0 [mlx5_core] [1031218.029256] mlx5e_tc_fib_event_work+0x1ad/0x300 [mlx5_core] [1031218.029885] process_one_work+0x24e/0x510 Actually no need to hold encap tbl lock if there is no encap action. Fix it by checking if encap action exists or not before holding encap tbl lock. Fixes: 37c3b9f ("net/mlx5e: Prevent encap offload when neigh update is running") Signed-off-by: Chris Mi <[email protected]> Reviewed-by: Vlad Buslov <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>

The following processes run into a deadlock. CPU 41 was waiting for CPU 29 to handle a CSD request while holding spinlock "crashdump_lock", but CPU 29 was hung by that spinlock with IRQs disabled. PID: 17360 TASK: ffff95c1090c5c40 CPU: 41 COMMAND: "mrdiagd" !# 0 [ffffb80edbf37b58] __read_once_size at ffffffff9b871a40 include/linux/compiler.h:185:0 !# 1 [ffffb80edbf37b58] atomic_read at ffffffff9b871a40 arch/x86/include/asm/atomic.h:27:0 !# 2 [ffffb80edbf37b58] dump_stack at ffffffff9b871a40 lib/dump_stack.c:54:0 # 3 [ffffb80edbf37b78] csd_lock_wait_toolong at ffffffff9b131ad5 kernel/smp.c:364:0 # 4 [ffffb80edbf37b78] __csd_lock_wait at ffffffff9b131ad5 kernel/smp.c:384:0 # 5 [ffffb80edbf37bf8] csd_lock_wait at ffffffff9b13267a kernel/smp.c:394:0 # 6 [ffffb80edbf37bf8] smp_call_function_many at ffffffff9b13267a kernel/smp.c:843:0 # 7 [ffffb80edbf37c50] smp_call_function at ffffffff9b13279d kernel/smp.c:867:0 # 8 [ffffb80edbf37c50] on_each_cpu at ffffffff9b13279d kernel/smp.c:976:0 # 9 [ffffb80edbf37c78] flush_tlb_kernel_range at ffffffff9b085c4b arch/x86/mm/tlb.c:742:0 #10 [ffffb80edbf37cb8] __purge_vmap_area_lazy at ffffffff9b23a1e0 mm/vmalloc.c:701:0 #11 [ffffb80edbf37ce0] try_purge_vmap_area_lazy at ffffffff9b23a2cc mm/vmalloc.c:722:0 #12 [ffffb80edbf37ce0] free_vmap_area_noflush at ffffffff9b23a2cc mm/vmalloc.c:754:0 #13 [ffffb80edbf37cf8] free_unmap_vmap_area at ffffffff9b23bb3b mm/vmalloc.c:764:0 #14 [ffffb80edbf37cf8] remove_vm_area at ffffffff9b23bb3b mm/vmalloc.c:1509:0 #15 [ffffb80edbf37d18] __vunmap at ffffffff9b23bb8a mm/vmalloc.c:1537:0 #16 [ffffb80edbf37d40] vfree at ffffffff9b23bc85 mm/vmalloc.c:1612:0 #17 [ffffb80edbf37d58] megasas_free_host_crash_buffer [megaraid_sas] at ffffffffc020b7f2 drivers/scsi/megaraid/megaraid_sas_fusion.c:3932:0 #18 [ffffb80edbf37d80] fw_crash_state_store [megaraid_sas] at ffffffffc01f804d drivers/scsi/megaraid/megaraid_sas_base.c:3291:0 #19 [ffffb80edbf37dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #20 [ffffb80edbf37dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #21 [ffffb80edbf37de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #22 [ffffb80edbf37e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #23 [ffffb80edbf37ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #24 [ffffb80edbf37ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #25 [ffffb80edbf37ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #26 [ffffb80edbf37f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #27 [ffffb80edbf37f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 PID: 17355 TASK: ffff95c1090c3d80 CPU: 29 COMMAND: "mrdiagd" !# 0 [ffffb80f2d3c7d30] __read_once_size at ffffffff9b0f2ab0 include/linux/compiler.h:185:0 !# 1 [ffffb80f2d3c7d30] native_queued_spin_lock_slowpath at ffffffff9b0f2ab0 kernel/locking/qspinlock.c:368:0 # 2 [ffffb80f2d3c7d58] pv_queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/paravirt.h:674:0 # 3 [ffffb80f2d3c7d58] queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/qspinlock.h:53:0 # 4 [ffffb80f2d3c7d68] queued_spin_lock at ffffffff9b8961a6 include/asm-generic/qspinlock.h:90:0 # 5 [ffffb80f2d3c7d68] do_raw_spin_lock_flags at ffffffff9b8961a6 include/linux/spinlock.h:173:0 # 6 [ffffb80f2d3c7d68] __raw_spin_lock_irqsave at ffffffff9b8961a6 include/linux/spinlock_api_smp.h:122:0 # 7 [ffffb80f2d3c7d68] _raw_spin_lock_irqsave at ffffffff9b8961a6 kernel/locking/spinlock.c:160:0 # 8 [ffffb80f2d3c7d88] fw_crash_buffer_store [megaraid_sas] at ffffffffc01f8129 drivers/scsi/megaraid/megaraid_sas_base.c:3205:0 # 9 [ffffb80f2d3c7dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #10 [ffffb80f2d3c7dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #11 [ffffb80f2d3c7de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #12 [ffffb80f2d3c7e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #13 [ffffb80f2d3c7ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #14 [ffffb80f2d3c7ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #15 [ffffb80f2d3c7ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #16 [ffffb80f2d3c7f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #17 [ffffb80f2d3c7f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 The lock is used to synchronize different sysfs operations, it doesn't protect any resource that will be touched by an interrupt. Consequently it's not required to disable IRQs. Replace the spinlock with a mutex to fix the deadlock. Signed-off-by: Junxiao Bi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Mike Christie <[email protected]> Cc: [email protected] Signed-off-by: Martin K. Petersen <[email protected]>

Fix an error detected by memory sanitizer: ``` ==4033==WARNING: MemorySanitizer: use-of-uninitialized-value #0 0x55fb0fbedfc7 in read_alias_info tools/perf/util/pmu.c:457:6 #1 0x55fb0fbea339 in check_info_data tools/perf/util/pmu.c:1434:2 #2 0x55fb0fbea339 in perf_pmu__check_alias tools/perf/util/pmu.c:1504:9 #3 0x55fb0fbdca85 in parse_events_add_pmu tools/perf/util/parse-events.c:1429:32 #4 0x55fb0f965230 in parse_events_parse tools/perf/util/parse-events.y:299:6 #5 0x55fb0fbdf6b2 in parse_events__scanner tools/perf/util/parse-events.c:1822:8 #6 0x55fb0fbdf8c1 in __parse_events tools/perf/util/parse-events.c:2094:8 #7 0x55fb0fa8ffa9 in parse_events tools/perf/util/parse-events.h:41:9 #8 0x55fb0fa8ffa9 in test_event tools/perf/tests/parse-events.c:2393:8 #9 0x55fb0fa8f458 in test__pmu_events tools/perf/tests/parse-events.c:2551:15 #10 0x55fb0fa6d93f in run_test tools/perf/tests/builtin-test.c:242:9 #11 0x55fb0fa6d93f in test_and_print tools/perf/tests/builtin-test.c:271:8 #12 0x55fb0fa6d082 in __cmd_test tools/perf/tests/builtin-test.c:442:5 #13 0x55fb0fa6d082 in cmd_test tools/perf/tests/builtin-test.c:564:9 #14 0x55fb0f942720 in run_builtin tools/perf/perf.c:322:11 #15 0x55fb0f942486 in handle_internal_command tools/perf/perf.c:375:8 #16 0x55fb0f941dab in run_argv tools/perf/perf.c:419:2 #17 0x55fb0f941dab in main tools/perf/perf.c:535:3 ``` Fixes: 7b723db ("perf pmu: Be lazy about loading event info files from sysfs") Signed-off-by: Ian Rogers <[email protected]> Cc: James Clark <[email protected]> Cc: Kan Liang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Namhyung Kim <[email protected]>

The following call trace shows a deadlock issue due to recursive locking of mutex "device_mutex". First lock acquire is in target_for_each_device() and second in target_free_device(). PID: 148266 TASK: ffff8be21ffb5d00 CPU: 10 COMMAND: "iscsi_ttx" #0 [ffffa2bfc9ec3b18] __schedule at ffffffffa8060e7f #1 [ffffa2bfc9ec3ba0] schedule at ffffffffa8061224 #2 [ffffa2bfc9ec3bb8] schedule_preempt_disabled at ffffffffa80615ee #3 [ffffa2bfc9ec3bc8] __mutex_lock at ffffffffa8062fd7 #4 [ffffa2bfc9ec3c40] __mutex_lock_slowpath at ffffffffa80631d3 #5 [ffffa2bfc9ec3c50] mutex_lock at ffffffffa806320c #6 [ffffa2bfc9ec3c68] target_free_device at ffffffffc0935998 [target_core_mod] #7 [ffffa2bfc9ec3c90] target_core_dev_release at ffffffffc092f975 [target_core_mod] #8 [ffffa2bfc9ec3ca0] config_item_put at ffffffffa79d250f #9 [ffffa2bfc9ec3cd0] config_item_put at ffffffffa79d2583 #10 [ffffa2bfc9ec3ce0] target_devices_idr_iter at ffffffffc0933f3a [target_core_mod] #11 [ffffa2bfc9ec3d00] idr_for_each at ffffffffa803f6fc #12 [ffffa2bfc9ec3d60] target_for_each_device at ffffffffc0935670 [target_core_mod] #13 [ffffa2bfc9ec3d98] transport_deregister_session at ffffffffc0946408 [target_core_mod] #14 [ffffa2bfc9ec3dc8] iscsit_close_session at ffffffffc09a44a6 [iscsi_target_mod] #15 [ffffa2bfc9ec3df0] iscsit_close_connection at ffffffffc09a4a88 [iscsi_target_mod] #16 [ffffa2bfc9ec3df8] finish_task_switch at ffffffffa76e5d07 #17 [ffffa2bfc9ec3e78] iscsit_take_action_for_connection_exit at ffffffffc0991c23 [iscsi_target_mod] #18 [ffffa2bfc9ec3ea0] iscsi_target_tx_thread at ffffffffc09a403b [iscsi_target_mod] #19 [ffffa2bfc9ec3f08] kthread at ffffffffa76d8080 #20 [ffffa2bfc9ec3f50] ret_from_fork at ffffffffa8200364 Fixes: 36d4cb4 ("scsi: target: Avoid that EXTENDED COPY commands trigger lock inversion") Signed-off-by: Junxiao Bi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Mike Christie <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>

Currently, arch_stack_walk() can only get the full stack information including NMI. This is because the implementation of arch_stack_walk() is forced to ignore the information passed by the regs parameter and use the current stack information instead. For some detection systems like KFENCE, only partial stack information is needed. In particular, the stack frame where the interrupt occurred. To support KFENCE, this patch modifies the implementation of the arch_stack_walk() function so that if this function is called with the regs argument passed, it retains all the stack information in regs and uses it to provide accurate information. Before this patch: [ 1.531195 ] ================================================================== [ 1.531442 ] BUG: KFENCE: out-of-bounds read in stack_trace_save_regs+0x48/0x6c [ 1.531442 ] [ 1.531900 ] Out-of-bounds read at 0xffff800012267fff (1B left of kfence-thesofproject#12): [ 1.532046 ] stack_trace_save_regs+0x48/0x6c [ 1.532169 ] kfence_report_error+0xa4/0x528 [ 1.532276 ] kfence_handle_page_fault+0x124/0x270 [ 1.532388 ] no_context+0x50/0x94 [ 1.532453 ] do_page_fault+0x1a8/0x36c [ 1.532524 ] tlb_do_page_fault_0+0x118/0x1b4 [ 1.532623 ] test_out_of_bounds_read+0xa0/0x1d8 [ 1.532745 ] kunit_generic_run_threadfn_adapter+0x1c/0x28 [ 1.532854 ] kthread+0x124/0x130 [ 1.532922 ] ret_from_kernel_thread+0xc/0xa4 <snip> After this patch: [ 1.320220 ] ================================================================== [ 1.320401 ] BUG: KFENCE: out-of-bounds read in test_out_of_bounds_read+0xa8/0x1d8 [ 1.320401 ] [ 1.320898 ] Out-of-bounds read at 0xffff800012257fff (1B left of kfence-thesofproject#10): [ 1.321134 ] test_out_of_bounds_read+0xa8/0x1d8 [ 1.321264 ] kunit_generic_run_threadfn_adapter+0x1c/0x28 [ 1.321392 ] kthread+0x124/0x130 [ 1.321459 ] ret_from_kernel_thread+0xc/0xa4 <snip> Suggested-by: Jinyang He <[email protected]> Signed-off-by: Enze Li <[email protected]> Signed-off-by: Huacai Chen <[email protected]>

…f-times' Eduard Zingerman says: ==================== verify callbacks as if they are called unknown number of times This series updates verifier logic for callback functions handling. Current master simulates callback body execution exactly once, which leads to verifier not detecting unsafe programs like below: static int unsafe_on_zero_iter_cb(__u32 idx, struct num_context *ctx) { ctx->i = 0; return 0; } SEC("?raw_tp") int unsafe_on_zero_iter(void *unused) { struct num_context loop_ctx = { .i = 32 }; __u8 choice_arr[2] = { 0, 1 }; bpf_loop(100, unsafe_on_zero_iter_cb, &loop_ctx, 0); return choice_arr[loop_ctx.i]; } This was reported previously in [0]. The basic idea of the fix is to schedule callback entry state for verification in env->head until some identical, previously visited state in current DFS state traversal is found. Same logic as with open coded iterators, and builds on top recent fixes [1] for those. The series is structured as follows: - patches #1,2,3 update strobemeta, xdp_synproxy selftests and bpf_loop_bench benchmark to allow convergence of the bpf_loop callback states; - patches #4,5 just shuffle the code a bit; - patch #6 is the main part of the series; - patch #7 adds test cases for #6; - patch #8 extend patch #6 with same speculative scalar widening logic, as used for open coded iterators; - patch #9 adds test cases for #8; - patch #10 extends patch #6 to track maximal number of callback executions specifically for bpf_loop(); - patch #11 adds test cases for #10. Veristat results comparing this series to master+patches #1,2,3 using selftests show the following difference: File Program States (A) States (B) States (DIFF) ------------------------- ------------- ---------- ---------- ------------- bpf_loop_bench.bpf.o benchmark 1 2 +1 (+100.00%) pyperf600_bpf_loop.bpf.o on_event 322 407 +85 (+26.40%) strobemeta_bpf_loop.bpf.o on_event 113 151 +38 (+33.63%) xdp_synproxy_kern.bpf.o syncookie_tc 341 291 -50 (-14.66%) xdp_synproxy_kern.bpf.o syncookie_xdp 344 301 -43 (-12.50%) Veristat results comparing this series to master using Tetragon BPF files [2] also show some differences. States diff varies from +2% to +15% on 23 programs out of 186, no new failures. Changelog: - V3 [5] -> V4, changes suggested by Andrii: - validate mark_chain_precision() result in patch #10; - renaming s/cumulative_callback_depth/callback_unroll_depth/. - V2 [4] -> V3: - fixes in expected log messages for test cases: - callback_result_precise; - parent_callee_saved_reg_precise_with_callback; - parent_stack_slot_precise_with_callback; - renamings (suggested by Alexei): - s/callback_iter_depth/cumulative_callback_depth/ - s/is_callback_iter_next/calls_callback/ - s/mark_callback_iter_next/mark_calls_callback/ - prepare_func_exit() updated to exit with -EFAULT when callee->in_callback_fn is true but calls_callback() is not true for callsite; - test case 'bpf_loop_iter_limit_nested' rewritten to use return value check instead of verifier log message checks (suggested by Alexei). - V1 [3] -> V2, changes suggested by Andrii: - small changes for error handling code in __check_func_call(); - callback body processing log is now matched in relevant verifier_subprog_precision.c tests; - R1 passed to bpf_loop() is now always marked as precise; - log level 2 message for bpf_loop() iteration termination instead of iteration depth messages; - __no_msg macro removed; - bpf_loop_iter_limit_nested updated to avoid using __no_msg; - commit message for patch #3 updated according to Alexei's request. [0] https://lore.kernel.org/bpf/CA+vRuzPChFNXmouzGG+wsy=6eMcfr1mFG0F3g7rbg-sedGKW3w@mail.gmail.com/ [1] https://lore.kernel.org/bpf/[email protected]/ [2] [email protected]:cilium/tetragon.git [3] https://lore.kernel.org/bpf/[email protected]/T/#t [4] https://lore.kernel.org/bpf/[email protected]/T/#t [5] https://lore.kernel.org/bpf/[email protected]/T/#t ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>

…ables.c syzkaller started to report a warning below [0] after consuming the commit 4654467 ("netfilter: arptables: allow xtables-nft only builds"). The change accidentally removed the dependency on NETFILTER_FAMILY_ARP from IP_NF_ARPTABLES. If NF_TABLES_ARP is not enabled on Kconfig, NETFILTER_FAMILY_ARP will be removed and some code necessary for arptables will not be compiled. $ grep -E "(NETFILTER_FAMILY_ARP|IP_NF_ARPTABLES|NF_TABLES_ARP)" .config CONFIG_NETFILTER_FAMILY_ARP=y # CONFIG_NF_TABLES_ARP is not set CONFIG_IP_NF_ARPTABLES=y $ make olddefconfig $ grep -E "(NETFILTER_FAMILY_ARP|IP_NF_ARPTABLES|NF_TABLES_ARP)" .config # CONFIG_NF_TABLES_ARP is not set CONFIG_IP_NF_ARPTABLES=y So, when nf_register_net_hooks() is called for arptables, it will trigger the splat below. Now IP_NF_ARPTABLES is only enabled by IP_NF_ARPFILTER, so let's restore the dependency on NETFILTER_FAMILY_ARP in IP_NF_ARPFILTER. [0]: WARNING: CPU: 0 PID: 242 at net/netfilter/core.c:316 nf_hook_entry_head+0x1e1/0x2c0 net/netfilter/core.c:316 Modules linked in: CPU: 0 PID: 242 Comm: syz-executor.0 Not tainted 6.8.0-12821-g537c2e91d354 #10 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:nf_hook_entry_head+0x1e1/0x2c0 net/netfilter/core.c:316 Code: 83 fd 04 0f 87 bc 00 00 00 e8 5b 84 83 fd 4d 8d ac ec a8 0b 00 00 e8 4e 84 83 fd 4c 89 e8 5b 5d 41 5c 41 5d c3 e8 3f 84 83 fd <0f> 0b e8 38 84 83 fd 45 31 ed 5b 5d 4c 89 e8 41 5c 41 5d c3 e8 26 RSP: 0018:ffffc90000b8f6e8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000003 RCX: ffffffff83c42164 RDX: ffff888106851180 RSI: ffffffff83c42321 RDI: 0000000000000005 RBP: 0000000000000000 R08: 0000000000000005 R09: 000000000000000a R10: 0000000000000003 R11: ffff8881055c2f00 R12: ffff888112b78000 R13: 0000000000000000 R14: ffff8881055c2f00 R15: ffff8881055c2f00 FS: 00007f377bd78800(0000) GS:ffff88811b000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000496068 CR3: 000000011298b003 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> __nf_register_net_hook+0xcd/0x7a0 net/netfilter/core.c:428 nf_register_net_hook+0x116/0x170 net/netfilter/core.c:578 nf_register_net_hooks+0x5d/0xc0 net/netfilter/core.c:594 arpt_register_table+0x250/0x420 net/ipv4/netfilter/arp_tables.c:1553 arptable_filter_table_init+0x41/0x60 net/ipv4/netfilter/arptable_filter.c:39 xt_find_table_lock+0x2e9/0x4b0 net/netfilter/x_tables.c:1260 xt_request_find_table_lock+0x2b/0xe0 net/netfilter/x_tables.c:1285 get_info+0x169/0x5c0 net/ipv4/netfilter/arp_tables.c:808 do_arpt_get_ctl+0x3f9/0x830 net/ipv4/netfilter/arp_tables.c:1444 nf_getsockopt+0x76/0xd0 net/netfilter/nf_sockopt.c:116 ip_getsockopt+0x17d/0x1c0 net/ipv4/ip_sockglue.c:1777 tcp_getsockopt+0x99/0x100 net/ipv4/tcp.c:4373 do_sock_getsockopt+0x279/0x360 net/socket.c:2373 __sys_getsockopt+0x115/0x1e0 net/socket.c:2402 __do_sys_getsockopt net/socket.c:2412 [inline] __se_sys_getsockopt net/socket.c:2409 [inline] __x64_sys_getsockopt+0xbd/0x150 net/socket.c:2409 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x4f/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x46/0x4e RIP: 0033:0x7f377beca6fe Code: 1f 44 00 00 48 8b 15 01 97 0a 00 f7 d8 64 89 02 b8 ff ff ff ff eb b8 0f 1f 44 00 00 f3 0f 1e fa 49 89 ca b8 37 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 0a c3 66 0f 1f 84 00 00 00 00 00 48 8b 15 c9 RSP: 002b:00000000005df728 EFLAGS: 00000246 ORIG_RAX: 0000000000000037 RAX: ffffffffffffffda RBX: 00000000004966e0 RCX: 00007f377beca6fe RDX: 0000000000000060 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 000000000042938a R08: 00000000005df73c R09: 00000000005df800 R10: 00000000004966e8 R11: 0000000000000246 R12: 0000000000000003 R13: 0000000000496068 R14: 0000000000000003 R15: 00000000004bc9d8 </TASK> Fixes: 4654467 ("netfilter: arptables: allow xtables-nft only builds") Reported-by: syzkaller <[email protected]> Signed-off-by: Kuniyuki Iwashima <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>

vhost_worker will call tun call backs to receive packets. If too many illegal packets arrives, tun_do_read will keep dumping packet contents. When console is enabled, it will costs much more cpu time to dump packet and soft lockup will be detected. net_ratelimit mechanism can be used to limit the dumping rate. PID: 33036 TASK: ffff949da6f20000 CPU: 23 COMMAND: "vhost-32980" #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253 #1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3 #2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e #3 [fffffe00003fced0] do_nmi at ffffffff8922660d #4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663 [exception RIP: io_serial_in+20] RIP: ffffffff89792594 RSP: ffffa655314979e8 RFLAGS: 00000002 RAX: ffffffff89792500 RBX: ffffffff8af428a0 RCX: 0000000000000000 RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff8af428a0 RBP: 0000000000002710 R8: 0000000000000004 R9: 000000000000000f R10: 0000000000000000 R11: ffffffff8acbf64f R12: 0000000000000020 R13: ffffffff8acbf698 R14: 0000000000000058 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #5 [ffffa655314979e8] io_serial_in at ffffffff89792594 #6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470 #7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6 #8 [ffffa65531497a20] uart_console_write at ffffffff8978b605 #9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558 #10 [ffffa65531497ac8] console_unlock at ffffffff89316124 #11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07 #12 [ffffa65531497b68] printk at ffffffff89318306 #13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765 #14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun] #15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun] #16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net] #17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost] #18 [ffffa65531497f10] kthread at ffffffff892d2e72 #19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f Fixes: ef3db4a ("tun: avoid BUG, dump packet on GSO errors") Signed-off-by: Lei Chen <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Acked-by: Jason Wang <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

…PLES event" This reverts commit 7d1405c. This causes segfaults in some cases, as reported by Milian: ``` sudo /usr/bin/perf record -z --call-graph dwarf -e cycles -e raw_syscalls:sys_enter ls ... [ perf record: Woken up 3 times to write data ] malloc(): invalid next size (unsorted) Aborted ``` Backtrace with GDB + debuginfod: ``` malloc(): invalid next size (unsorted) Thread 1 "perf" received signal SIGABRT, Aborted. __pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6, no_tid=no_tid@entry=0) at pthread_kill.c:44 Downloading source file /usr/src/debug/glibc/glibc/nptl/pthread_kill.c 44 return INTERNAL_SYSCALL_ERROR_P (ret) ? INTERNAL_SYSCALL_ERRNO (ret) : 0; (gdb) bt #0 __pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6, no_tid=no_tid@entry=0) at pthread_kill.c:44 #1 0x00007ffff6ea8eb3 in __pthread_kill_internal (threadid=<optimized out>, signo=6) at pthread_kill.c:78 #2 0x00007ffff6e50a30 in __GI_raise (sig=sig@entry=6) at ../sysdeps/posix/ raise.c:26 #3 0x00007ffff6e384c3 in __GI_abort () at abort.c:79 #4 0x00007ffff6e39354 in __libc_message_impl (fmt=fmt@entry=0x7ffff6fc22ea "%s\n") at ../sysdeps/posix/libc_fatal.c:132 #5 0x00007ffff6eb3085 in malloc_printerr (str=str@entry=0x7ffff6fc5850 "malloc(): invalid next size (unsorted)") at malloc.c:5772 #6 0x00007ffff6eb657c in _int_malloc (av=av@entry=0x7ffff6ff6ac0 <main_arena>, bytes=bytes@entry=368) at malloc.c:4081 #7 0x00007ffff6eb877e in __libc_calloc (n=<optimized out>, elem_size=<optimized out>) at malloc.c:3754 #8 0x000055555569bdb6 in perf_session.do_write_header () #9 0x00005555555a373a in __cmd_record.constprop.0 () #10 0x00005555555a6846 in cmd_record () #11 0x000055555564db7f in run_builtin () #12 0x000055555558ed77 in main () ``` Valgrind memcheck: ``` ==45136== Invalid write of size 8 ==45136== at 0x2B38A5: perf_event__synthesize_id_sample (in /usr/bin/perf) ==45136== by 0x157069: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== Address 0x6a866a8 is 0 bytes after a block of size 40 alloc'd ==45136== at 0x4849BF3: calloc (vg_replace_malloc.c:1675) ==45136== by 0x3574AB: zalloc (in /usr/bin/perf) ==45136== by 0x1570E0: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== ==45136== Syscall param write(buf) points to unaddressable byte(s) ==45136== at 0x575953D: __libc_write (write.c:26) ==45136== by 0x575953D: write (write.c:24) ==45136== by 0x35761F: ion (in /usr/bin/perf) ==45136== by 0x357778: writen (in /usr/bin/perf) ==45136== by 0x1548F7: record__write (in /usr/bin/perf) ==45136== by 0x15708A: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== Address 0x6a866a8 is 0 bytes after a block of size 40 alloc'd ==45136== at 0x4849BF3: calloc (vg_replace_malloc.c:1675) ==45136== by 0x3574AB: zalloc (in /usr/bin/perf) ==45136== by 0x1570E0: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== ----- Closes: https://lore.kernel.org/linux-perf-users/23879991.0LEYPuXRzz@milian-workstation/ Reported-by: Milian Wolff <[email protected]> Tested-by: Milian Wolff <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: [email protected] # 6.8+ Link: https://lore.kernel.org/lkml/Zl9ksOlHJHnKM70p@x1 Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

We have been seeing crashes on duplicate keys in btrfs_set_item_key_safe(): BTRFS critical (device vdb): slot 4 key (450 108 8192) new key (450 108 8192) ------------[ cut here ]------------ kernel BUG at fs/btrfs/ctree.c:2620! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 3139 Comm: xfs_io Kdump: loaded Not tainted 6.9.0 #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:btrfs_set_item_key_safe+0x11f/0x290 [btrfs] With the following stack trace: #0 btrfs_set_item_key_safe (fs/btrfs/ctree.c:2620:4) #1 btrfs_drop_extents (fs/btrfs/file.c:411:4) #2 log_one_extent (fs/btrfs/tree-log.c:4732:9) #3 btrfs_log_changed_extents (fs/btrfs/tree-log.c:4955:9) #4 btrfs_log_inode (fs/btrfs/tree-log.c:6626:9) #5 btrfs_log_inode_parent (fs/btrfs/tree-log.c:7070:8) #6 btrfs_log_dentry_safe (fs/btrfs/tree-log.c:7171:8) #7 btrfs_sync_file (fs/btrfs/file.c:1933:8) #8 vfs_fsync_range (fs/sync.c:188:9) #9 vfs_fsync (fs/sync.c:202:9) #10 do_fsync (fs/sync.c:212:9) #11 __do_sys_fdatasync (fs/sync.c:225:9) #12 __se_sys_fdatasync (fs/sync.c:223:1) #13 __x64_sys_fdatasync (fs/sync.c:223:1) #14 do_syscall_x64 (arch/x86/entry/common.c:52:14) #15 do_syscall_64 (arch/x86/entry/common.c:83:7) #16 entry_SYSCALL_64+0xaf/0x14c (arch/x86/entry/entry_64.S:121) So we're logging a changed extent from fsync, which is splitting an extent in the log tree. But this split part already exists in the tree, triggering the BUG(). This is the state of the log tree at the time of the crash, dumped with drgn (https://github.com/osandov/drgn/blob/main/contrib/btrfs_tree.py) to get more details than btrfs_print_leaf() gives us: >>> print_extent_buffer(prog.crashed_thread().stack_trace()[0]["eb"]) leaf 33439744 level 0 items 72 generation 9 owner 18446744073709551610 leaf 33439744 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da item 0 key (450 INODE_ITEM 0) itemoff 16123 itemsize 160 generation 7 transid 9 size 8192 nbytes 8473563889606862198 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 204 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417704.983333333 (2024-05-22 15:41:44) mtime 1716417704.983333333 (2024-05-22 15:41:44) otime 17592186044416.000000000 (559444-03-08 01:40:16) item 1 key (450 INODE_REF 256) itemoff 16110 itemsize 13 index 195 namelen 3 name: 193 item 2 key (450 XATTR_ITEM 1640047104) itemoff 16073 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 3 key (450 EXTENT_DATA 0) itemoff 16020 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 4096 ram 12288 extent compression 0 (none) item 4 key (450 EXTENT_DATA 4096) itemoff 15967 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 4096 nr 8192 item 5 key (450 EXTENT_DATA 8192) itemoff 15914 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 ... So the real problem happened earlier: notice that items 4 (4k-12k) and 5 (8k-12k) overlap. Both are prealloc extents. Item 4 straddles i_size and item 5 starts at i_size. Here is the state of the filesystem tree at the time of the crash: >>> root = prog.crashed_thread().stack_trace()[2]["inode"].root >>> ret, nodes, slots = btrfs_search_slot(root, BtrfsKey(450, 0, 0)) >>> print_extent_buffer(nodes[0]) leaf 30425088 level 0 items 184 generation 9 owner 5 leaf 30425088 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da ... item 179 key (450 INODE_ITEM 0) itemoff 4907 itemsize 160 generation 7 transid 7 size 4096 nbytes 12288 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 6 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417703.220000000 (2024-05-22 15:41:43) mtime 1716417703.220000000 (2024-05-22 15:41:43) otime 1716417703.220000000 (2024-05-22 15:41:43) item 180 key (450 INODE_REF 256) itemoff 4894 itemsize 13 index 195 namelen 3 name: 193 item 181 key (450 XATTR_ITEM 1640047104) itemoff 4857 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 182 key (450 EXTENT_DATA 0) itemoff 4804 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 8192 ram 12288 extent compression 0 (none) item 183 key (450 EXTENT_DATA 8192) itemoff 4751 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 Item 5 in the log tree corresponds to item 183 in the filesystem tree, but nothing matches item 4. Furthermore, item 183 is the last item in the leaf. btrfs_log_prealloc_extents() is responsible for logging prealloc extents beyond i_size. It first truncates any previously logged prealloc extents that start beyond i_size. Then, it walks the filesystem tree and copies the prealloc extent items to the log tree. If it hits the end of a leaf, then it calls btrfs_next_leaf(), which unlocks the tree and does another search. However, while the filesystem tree is unlocked, an ordered extent completion may modify the tree. In particular, it may insert an extent item that overlaps with an extent item that was already copied to the log tree. This may manifest in several ways depending on the exact scenario, including an EEXIST error that is silently translated to a full sync, overlapping items in the log tree, or this crash. This particular crash is triggered by the following sequence of events: - Initially, the file has i_size=4k, a regular extent from 0-4k, and a prealloc extent beyond i_size from 4k-12k. The prealloc extent item is the last item in its B-tree leaf. - The file is fsync'd, which copies its inode item and both extent items to the log tree. - An xattr is set on the file, which sets the BTRFS_INODE_COPY_EVERYTHING flag. - The range 4k-8k in the file is written using direct I/O. i_size is extended to 8k, but the ordered extent is still in flight. - The file is fsync'd. Since BTRFS_INODE_COPY_EVERYTHING is set, this calls copy_inode_items_to_log(), which calls btrfs_log_prealloc_extents(). - btrfs_log_prealloc_extents() finds the 4k-12k prealloc extent in the filesystem tree. Since it starts before i_size, it skips it. Since it is the last item in its B-tree leaf, it calls btrfs_next_leaf(). - btrfs_next_leaf() unlocks the path. - The ordered extent completion runs, which converts the 4k-8k part of the prealloc extent to written and inserts the remaining prealloc part from 8k-12k. - btrfs_next_leaf() does a search and finds the new prealloc extent 8k-12k. - btrfs_log_prealloc_extents() copies the 8k-12k prealloc extent into the log tree. Note that it overlaps with the 4k-12k prealloc extent that was copied to the log tree by the first fsync. - fsync calls btrfs_log_changed_extents(), which tries to log the 4k-8k extent that was written. - This tries to drop the range 4k-8k in the log tree, which requires adjusting the start of the 4k-12k prealloc extent in the log tree to 8k. - btrfs_set_item_key_safe() sees that there is already an extent starting at 8k in the log tree and calls BUG(). Fix this by detecting when we're about to insert an overlapping file extent item in the log tree and truncating the part that would overlap. CC: [email protected] # 6.1+ Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Omar Sandoval <[email protected]> Signed-off-by: David Sterba <[email protected]>

In commit 15d9da3 ("binder: use bitmap for faster descriptor lookup"), it was incorrectly assumed that references to the context manager node should always get descriptor zero assigned to them. However, if the context manager dies and a new process takes its place, then assigning descriptor zero to the new context manager might lead to collisions, as there could still be references to the older node. This issue was reported by syzbot with the following trace: kernel BUG at drivers/android/binder.c:1173! Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 1 PID: 447 Comm: binder-util Not tainted 6.10.0-rc6-00348-g31643d84b8c3 thesofproject#10 Hardware name: linux,dummy-virt (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : binder_inc_ref_for_node+0x500/0x544 lr : binder_inc_ref_for_node+0x1e4/0x544 sp : ffff80008112b940 x29: ffff80008112b940 x28: ffff0e0e40310780 x27: 0000000000000000 x26: 0000000000000001 x25: ffff0e0e40310738 x24: ffff0e0e4089ba34 x23: ffff0e0e40310b00 x22: ffff80008112bb50 x21: ffffaf7b8f246970 x20: ffffaf7b8f773f08 x19: ffff0e0e4089b800 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 000000002de4aa60 x14: 0000000000000000 x13: 2de4acf000000000 x12: 0000000000000020 x11: 0000000000000018 x10: 0000000000000020 x9 : ffffaf7b90601000 x8 : ffff0e0e48739140 x7 : 0000000000000000 x6 : 000000000000003f x5 : ffff0e0e40310b28 x4 : 0000000000000000 x3 : ffff0e0e40310720 x2 : ffff0e0e40310728 x1 : 0000000000000000 x0 : ffff0e0e40310710 Call trace: binder_inc_ref_for_node+0x500/0x544 binder_transaction+0xf68/0x2620 binder_thread_write+0x5bc/0x139c binder_ioctl+0xef4/0x10c8 [...] This patch adds back the previous behavior of assigning the next non-zero descriptor if references to previous context managers still exist. It amends both strategies, the newer dbitmap code and also the legacy slow_desc_lookup_olocked(), by allowing them to start looking for available descriptors at a given offset. Fixes: 15d9da3 ("binder: use bitmap for faster descriptor lookup") Cc: [email protected] Reported-and-tested-by: [email protected] Closes: https://lore.kernel.org/all/[email protected]/ Reviewed-by: Alice Ryhl <[email protected]> Signed-off-by: Carlos Llamas <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

A sysfs reader can race with a device reset or removal, attempting to read device state when the device is not actually present. eg: [exception RIP: qed_get_current_link+17] thesofproject#8 [ffffb9e4f2907c48] qede_get_link_ksettings at ffffffffc07a994a [qede] thesofproject#9 [ffffb9e4f2907cd8] __rh_call_get_link_ksettings at ffffffff992b01a3 thesofproject#10 [ffffb9e4f2907d38] __ethtool_get_link_ksettings at ffffffff992b04e4 thesofproject#11 [ffffb9e4f2907d90] duplex_show at ffffffff99260300 thesofproject#12 [ffffb9e4f2907e38] dev_attr_show at ffffffff9905a01c thesofproject#13 [ffffb9e4f2907e50] sysfs_kf_seq_show at ffffffff98e0145b thesofproject#14 [ffffb9e4f2907e68] seq_read at ffffffff98d902e3 thesofproject#15 [ffffb9e4f2907ec8] vfs_read at ffffffff98d657d1 thesofproject#16 [ffffb9e4f2907f00] ksys_read at ffffffff98d65c3f thesofproject#17 [ffffb9e4f2907f38] do_syscall_64 at ffffffff98a052fb crash> struct net_device.state ffff9a9d21336000 state = 5, state 5 is __LINK_STATE_START (0b1) and __LINK_STATE_NOCARRIER (0b100). The device is not present, note lack of __LINK_STATE_PRESENT (0b10). This is the same sort of panic as observed in commit 4224cfd ("net-sysfs: add check for netdevice being present to speed_show"). There are many other callers of __ethtool_get_link_ksettings() which don't have a device presence check. Move this check into ethtool to protect all callers. Fixes: d519e17 ("net: export device speed and duplex via sysfs") Fixes: 4224cfd ("net-sysfs: add check for netdevice being present to speed_show") Signed-off-by: Jamie Bainbridge <[email protected]> Link: https://patch.msgid.link/8bae218864beaa44ed01628140475b9bf641c5b0.1724393671.git.jamie.bainbridge@gmail.com Signed-off-by: Jakub Kicinski <[email protected]>

kmarinushkin and others added 30 commits June 4, 2018 10:58

ASoC: topology: Add support for compressed PCMs

5625100

Register a compressed PCM if topology defines one. Signed-off-by: Liam Girdwood <[email protected]> Signed-off-by: Mark Brown <[email protected]> (cherry picked from commit 5db6aab)

ASoC: topology: Add callback for DAPM route load/unload

4c8ac45

Add a callback fro clients for notification about DAPM route loading and unloading. Signed-off-by: Liam Girdwood <[email protected]> Signed-off-by: Mark Brown <[email protected]> (cherry picked from commit 503e79b)

ASoC: Intel: common: rename 'reef' to 'sof' in ACPI matching table

453d691

Align with firmware tools, no functionality change Signed-off-by: Pierre-Louis Bossart <[email protected]>

[SQUASHME?] ASoC: core: Add name prefix for machines with topology re…

ca84505

…writes Signed-off-by: Liam Girdwood <[email protected]>

ASoC: SOF: Add Sound Open Firmware KControl support

d2ee6b1

SOF exposes regular ALSA Kcontrols that are defined by topology. This patch converts the Kcontrol IO to DSP IPC. Signed-off-by: Liam Girdwood <[email protected]>

ASoC: SOF: Add driver debug support.

4c649d0

Add debugFS files that can be used to expose DSP memories and and peripherals to userspace to assist with firmware debugging. Signed-off-by: Liam Girdwood <[email protected]>

ASoC: SOF: Add support for IPC IO between DSP and Host

ce4ffeb

Define an IPC ABI for all host <--> DSP communication. This ABI should be transport agnostic. i.e. it should work on MMIO and SPI/I2C style interfaces. Signed-off-by: Liam Girdwood <[email protected]>

ASoC: SOF: Add PCM operations support

9c9d49d

Add support for exposing PCMs to userspace. PCMs are defined by topology and the operations in this patch map to SOF IPC calls. Signed-off-by: Liam Girdwood <[email protected]>

ASoC: SOF: Add DSP firmware trace event support

496c29a

Add a trace event buffer that can be used by userspace to read DSP runtime trace events alongside bespoke trace data in realtime for firmware debug. Signed-off-by: Liam Girdwood <[email protected]>

IulianOlaru249 pushed a commit to IulianOlaru249/linux that referenced this pull request Mar 16, 2022

tools/labs: Use proper lab id (thesofproject#10)

e682d95

In networking lab

lucastanure mentioned this pull request May 2, 2022

Missing SSP2 (I2S) from Up Xtreme WHL-I5 #3624

Closed

aplitvinov mentioned this pull request Apr 21, 2023

No sound on Huawei Matebook 14 (2021) - even on Linux 6.2 #4305

Open

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Loopback mode kcontrol support #10

Loopback mode kcontrol support #10

xiulipan commented Jun 28, 2018 •

edited

Loading

Loopback mode kcontrol support #10

Loopback mode kcontrol support #10

Conversation

xiulipan commented Jun 28, 2018 • edited Loading

xiulipan commented Jun 28, 2018 •

edited

Loading