-
Notifications
You must be signed in to change notification settings - Fork 40
Home
Boris Rybalkin edited this page Jan 17, 2021
·
94 revisions
Building Syncloud device is easy. You will need: ARM or x64 computer, power adapter, ethernet cable, disk or SD card. You will also need a computer to create a boot disk or SD card. Just follow the instruction below.
Here's the list of supported boards and links to image files:
Board Name | Syncloud Image |
---|---|
Banana Pi M1 | Download |
Banana Pi M1+ | Download |
Banana Pi M2 | Download |
Banana Pi M3 | Download |
Cubieboard | Download |
Cubieboard 2 | Download |
Cubietruck | Download |
BeagleBone Black | Download |
Raspberry Pi 2 (B) | Download |
Raspberry Pi 3/4 (B/B+, 4G/8G) | Download |
Odroid C2 | Download |
Odroid XU3 | Download |
Odroid HC1 | SD, SATA, info |
Odroid HC2 | SD, SATA, info |
Odroid HC4 | Download |
Odroid XU4 | Download |
Odroid N2 | Download |
Odroid U3 | Download |
Tinker | Download |
Helios4 | Download |
Helios64 | Download |
Rock64 | Download |
x64 Virtual Box | Download, info |
x64 Linux Docker | info |
x64 Syncloud OS [Legacy BIOS] | Download, info |
x64 Syncloud OS [UEFI] | Download, info |
- Write image to a disk or SD card with Etcher image writer
Be careful and detach other external drives before writing so you do not erase everything from it accidentally.
- Insert disk or SD card into device and boot it.
Your Syncloud device is ready. Follow this instruction to activate it.
Default SSH credentials for non-activated device. Login: root, password: syncloud
During the activation you will set your own device password which will become also your ssh root password.