-
Notifications
You must be signed in to change notification settings - Fork 0
Scancodes
This page is maintained for historic purposes. The functionality of the code below can now be achieved through the _KEYDOWN function.
Scancodes are the return values of keyboard input that can be read using INP to find key presses and releases, unlike the ASCII codes returned using INKEY$.
scanCode% = INP(&H60)
- Used to find [Ctrl], [Alt], [Shift], [Caps Lock], [Scroll Lock], [Num Lock] and [F]unction key controls.
- The keyboard input is stored at decimal register 96 or &H60 hexadecimal.
- Returns values from 0 to 127 for keypresses. 129 to 255 for key releases. Codes 91 to 93 are available in QB64 only.
- Every key (except Prt Scr/Sys Rq) has an identifying code that will not change with Caps Lock or Shift.
- Release codes are the original key press code
+ 128. Example: [Esc] key press = 1 and release = 129. - Extended (added) keys on modern keyboards may alternate codes with Left Shift codes 42 and 170 because of Num Lock mode.
- Keyboards with Alt Gr key: _KEYHIT may return both Alt (100307) and Ctrl (100306) codes when key is pressed or released.
- **Linux with foreign keyboards:
[SHELL](SHELL) [_HIDE](_HIDE) "setxkbmap us"can be used to setup a keyboard to read US scan codes. - To clear the keyboard buffer, use the INKEY$ function before or after the INP read to avoid buffer overflows and beeps.
' **Extended Keyboard Press Scancodes**
'
**' Esc F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 SysReq ScrL Pause**
' 1 59 60 61 62 63 64 65 66 67 68 87 88 0 70 29
' **`~ 1! 2@ 3# 4$ 5% 6^ 7& 8* 9( 0) -_ =+ BkSpc Insert Home PgUp NumL / * -**
' 41 2 3 4 5 6 7 8 9 10 11 12 13 14 82 71 73 69 53 55 74
' **Tab Q W E R T Y U I O P [{ ]} \| Delete End PgDn 7/Home 8/▲ 9/PU + **
' 15 16 17 18 19 20 21 22 23 24 25 26 27 43 83 79 81 71 72 73 78
' **CapL A S D F G H J K L ;: '" Enter 4/◄- 5 6/-► E**
' 58 30 31 32 33 34 35 36 37 38 39 40 28 75 76 77 **n**
' **Shift Z X C V B N M ,< .> /? Shift ▲ 1/End 2/▼ 3/PD t**
' 42 44 45 46 47 48 49 50 51 52 53 54 72 79 80 81 **e**
' **Ctrl Win Alt Spacebar Alt Win Menu Ctrl ◄- ▼ -► 0/Insert ./Del r**
' 29 91 56 57 56 92 93 29 75 80 77 82 83 28
'
' QB64 codes only! **Release codes = Press code + 128. Pause/Break may lock code returns.**
NOTE: The above commented table can be copied and pasted directly into the QB64 IDE
- In QBasic, extended keys would have the Left Shift release code 224 alternate with the actual release code. Extended keys are the Arrow keypad, Home keypad, Right Alt, and Right Ctrl keys on 101 + extended keyboards with the arrow pad, home pad and number pad.
Displays the scan codes for most any keyboard press or release by the user.
DO
scancode% = INP(&H60)
LOCATE 15, 30
IF scancode% < 128 THEN COLOR 10: PRINT "Pressed Code ="; scancode%; SPACE$(1)
IF scancode% > 127 THEN COLOR 12: PRINT "Release Code ="; scancode%; SPACE$(1)
a$ = INKEY$ ' prevent keyboard beeps
LOOP UNTIL scancode% = 1 ' [Esc] key exit
Explanation: Green is a press code and red is the release code. Num Lock mode may display the Left Shift key press(42) and release(170) codes, plus code 224, but the designated codes are returned also. QB64 does not return those extra codes.
Unlike QBasic, INP(&H60) in QB64 reads from a queue so you never miss a key press.
DEFINT A-Z
DIM SHARED KeyPress(127)
CLS
tmp$ = " ## \\ "
DEF SEG = 0
DO
i = INP(&H60) 'update keydown states
DO 'key read loop
IF (i AND 128) THEN KeyPress(i XOR 128) = 0
IF (i AND 128) = 0 THEN KeyPress(i) = -1
i2 = i
i = INP(&H60)
POKE 1050, PEEK(1052) 'clear keyboard buffer
LOOP UNTIL i = i2
row = 2 'display the key down states to show you how it works!
FOR x% = 1 TO 88 'read each key scancode from KeyDown array
L = x% MOD 10: column = (7 * L) + 5
IF L = 0 THEN row = row + 2
LOCATE row, column
IF KeyPress(x%) THEN PRINT USING tmp$; x%; STRING$(2, 219) ELSE PRINT USING tmp$; x%; "UP"
NEXT
LOOP UNTIL i = 1
DEF SEG
END
Code by Galleon
Explanation: INP does not clear the keyboard buffer so it may beep. To eliminate the problem use INKEY$ before or after reading with INP(96). INP will still return the press code. The array can hold more than one code return. QBasic users may note that the arrow pad and Home pad keypresses also alternate codes 42 and 170 due to Number Lock setting. That will not happen in QB64.
A simple MULTIKEY demo using the SC Array to hold multiple key presses for diagonal arrow key moves.
DEFINT A-Z
DIM BG(300), Box(300), SC(127) ' BG holds background images. Box holds the Box image.
SCREEN 13 ' graphic coordinate minimums are 0 to 319 column or 199 row maximums.
' set up screen background
COLOR 4: LOCATE 10, 5: PRINT "Multikey Keyboard input routine"
COLOR 10: LOCATE 12, 4: PRINT "Use the arrow keys to move the box."
LOCATE 13, 4: PRINT "Note that you can press two or more"
LOCATE 14, 4: PRINT "keys at once for diagonal movement!"
COLOR 14: LOCATE 16, 4: PRINT " Also demonstrates how GET and PUT "
LOCATE 17, 4: PRINT "are used to preserve the background."
COLOR 11: LOCATE 20, 11: PRINT "Press [Esc] to quit"
x = 150: y = 50: PX = x: PY = y ' actual box starting position
GET (x, y)-(x + 15, y + 15), BG ' GET original BG at start box position
LINE (x, y)-(x + 15, y + 15), 9, BF ' the plain blue box to move
GET (x, y)-(x + 15, y + 15), Box ' GET to Box Array
DO 'main loop
t! = TIMER + .05
DO ' 1 Tick (1/18th second) keypress scancode read loop
a$ = INKEY$ ' So the keyboard buffer won't get full
code% = INP(&H60) ' Get keyboard scan code from port 96
IF code% < 128 THEN SC(code%) = 1 ELSE SC(code% - 128) = 0 ' true/false values to array
LOOP UNTIL TIMER > t!' loop until one tick has passed
PX = x: PY = y ' previous coordinates
IF SC(75) = 1 THEN x = x - 5: IF x < 0 THEN x = 0
IF SC(77) = 1 THEN x = x + 5: IF x > 304 THEN x = 304
IF SC(72) = 1 THEN y = y - 5: IF y < 0 THEN y = 0
IF SC(80) = 1 THEN y = y + 5: IF y > 184 THEN y = 184
IF x <> PX OR y <> PY THEN ' look for a changed coordinate value
WAIT 936, 8: PUT (PX, PY), BG, PSET ' replace previous BG first
GET (x, y)-(x + 15, y + 15), BG ' GET BG at new position before box is set
PUT (x, y), Box, PSET ' PUT box image at new position
END IF
LOOP UNTIL SC(1) = 1 ' main loop until [Esc] key (scan code 1) is pressed
Code by Ted Weissgerber
Explanation: The SC array is used to hold all of the scancode status index values as 1 when pressed and 0 if released(see the ELSE statement). If arrow key(s) are pressed then each is moved to new positions on the screen. The coordinates are also checked to keep the box area's GET (graphics statement) and PUT (graphics statement) statements on the screen to avoid an error. The previous background is PUT using the previous coordinates PX and PY. Then new position background box area is saved with GET before the box is placed with PUT. The box image is 16 X 16 and could use another image.