arm/aspeed_defconfig: Add required options to boot with systemd #2

cyrilbur-ibm · 2015-10-13T05:54:18Z

No description provided.

arm/aspeed_defconfig: Add required options to boot with systemd

shenki · 2015-10-13T06:06:53Z

arch/arm/configs/aspeed_defconfig

@@ -148,7 +151,7 @@ CONFIG_USB_STORAGE=y
 CONFIG_USB_SERIAL=y
 CONFIG_USB_SERIAL_GENERIC=y
 CONFIG_USB_GADGET=y
-CONFIG_USB_G_SERIAL=y
+CONFIG_USB_G_SERIAL=m
 CONFIG_MMC=y


What's up with this change?

Hey,

On Mon, 12 Oct 2015 23:06:54 Joel Stanley wrote:

@@ -148,7 +151,7 @@ CONFIG_USB_STORAGE=y
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_GADGET=y
-CONFIG_USB_G_SERIAL=y
+CONFIG_USB_G_SERIAL=m
CONFIG_MMC=y

What's up with this change?

Just talked Cyril ... no reason really. Apparently the kernel defconfig generator made the change. Is this something we care about?

Reply to this email directly or view it on GitHub:
https://github.com/openbmc/linux/pull/2/files#r41829799

On Tue, Oct 13, 2015 at 4:42 PM, apopple [email protected] wrote:

Just talked Cyril ... no reason really. Apparently the kernel defconfig generator made the change. Is this something we care about?

Not really, it's just for the cases where we're netbooting kernels we
will be missing any modules, so we want everything to be either =y or
=n. I don't think anyone is doing usb stuff yet.

Kernel testing triggered this warning: | WARNING: CPU: 0 PID: 13 at kernel/sched/core.c:1156 do_set_cpus_allowed+0x7e/0x80() | Modules linked in: | CPU: 0 PID: 13 Comm: migration/0 Not tainted 4.2.0-rc1-00049-g25834c7 #2 | Call Trace: | dump_stack+0x4b/0x75 | warn_slowpath_common+0x8b/0xc0 | warn_slowpath_null+0x22/0x30 | do_set_cpus_allowed+0x7e/0x80 | cpuset_cpus_allowed_fallback+0x7c/0x170 | select_fallback_rq+0x221/0x280 | migration_call+0xe3/0x250 | notifier_call_chain+0x53/0x70 | __raw_notifier_call_chain+0x1e/0x30 | cpu_notify+0x28/0x50 | take_cpu_down+0x22/0x40 | multi_cpu_stop+0xd5/0x140 | cpu_stopper_thread+0xbc/0x170 | smpboot_thread_fn+0x174/0x2f0 | kthread+0xc4/0xe0 | ret_from_kernel_thread+0x21/0x30 As Peterz pointed out: | So the normal rules for changing task_struct::cpus_allowed are holding | both pi_lock and rq->lock, such that holding either stabilizes the mask. | | This is so that wakeup can happen without rq->lock and load-balance | without pi_lock. | | From this we already get the relaxation that we can omit acquiring | rq->lock if the task is not on the rq, because in that case | load-balancing will not apply to it. | | ** these are the rules currently tested in do_set_cpus_allowed() ** | | Now, since __set_cpus_allowed_ptr() uses task_rq_lock() which | unconditionally acquires both locks, we could get away with holding just | rq->lock when on_rq for modification because that'd still exclude | __set_cpus_allowed_ptr(), it would also work against | __kthread_bind_mask() because that assumes !on_rq. | | That said, this is all somewhat fragile. | | Now, I don't think dropping rq->lock is quite as disastrous as it | usually is because !cpu_active at this point, which means load-balance | will not interfere, but that too is somewhat fragile. | | So we end up with a choice of two fragile.. This patch fixes it by following the rules for changing task_struct::cpus_allowed with both pi_lock and rq->lock held. Reported-by: kernel test robot <[email protected]> Reported-by: Sasha Levin <[email protected]> Signed-off-by: Wanpeng Li <[email protected]> [ Modified changelog and patch. ] Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>

The renesas-irqc interrupt controller is cascaded to the GIC. Hence when propagating wake-up settings to its parent interrupt controller, the following lockdep warning is printed: ============================================= [ INFO: possible recursive locking detected ] 4.2.0-ape6evm-10725-g50fcd7643c034198 torvalds#280 Not tainted --------------------------------------------- s2ram/1072 is trying to acquire lock: (&irq_desc_lock_class){-.-...}, at: [<c008d3fc>] __irq_get_desc_lock+0x58/0x98 but task is already holding lock: (&irq_desc_lock_class){-.-...}, at: [<c008d3fc>] __irq_get_desc_lock+0x58/0x98 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&irq_desc_lock_class); lock(&irq_desc_lock_class); *** DEADLOCK *** May be due to missing lock nesting notation 6 locks held by s2ram/1072: #0: (sb_writers#7){.+.+.+}, at: [<c012eb14>] __sb_start_write+0xa0/0xa8 #1: (&of->mutex){+.+.+.}, at: [<c019396c>] kernfs_fop_write+0x4c/0x1bc #2: (s_active#24){.+.+.+}, at: [<c0193974>] kernfs_fop_write+0x54/0x1bc #3: (pm_mutex){+.+.+.}, at: [<c008213c>] pm_suspend+0x10c/0x510 #4: (&dev->mutex){......}, at: [<c02af3c4>] __device_suspend+0xdc/0x2cc #5: (&irq_desc_lock_class){-.-...}, at: [<c008d3fc>] __irq_get_desc_lock+0x58/0x98 stack backtrace: CPU: 0 PID: 1072 Comm: s2ram Not tainted 4.2.0-ape6evm-10725-g50fcd7643c034198 torvalds#280 Hardware name: Generic R8A73A4 (Flattened Device Tree) [<c0018078>] (unwind_backtrace) from [<c00144f0>] (show_stack+0x10/0x14) [<c00144f0>] (show_stack) from [<c0451f14>] (dump_stack+0x88/0x98) [<c0451f14>] (dump_stack) from [<c007b29c>] (__lock_acquire+0x15cc/0x20e4) [<c007b29c>] (__lock_acquire) from [<c007c6e0>] (lock_acquire+0xac/0x12c) [<c007c6e0>] (lock_acquire) from [<c0457c00>] (_raw_spin_lock_irqsave+0x40/0x54) [<c0457c00>] (_raw_spin_lock_irqsave) from [<c008d3fc>] (__irq_get_desc_lock+0x58/0x98) [<c008d3fc>] (__irq_get_desc_lock) from [<c008ebbc>] (irq_set_irq_wake+0x20/0xf8) [<c008ebbc>] (irq_set_irq_wake) from [<c0260770>] (irqc_irq_set_wake+0x20/0x4c) [<c0260770>] (irqc_irq_set_wake) from [<c008ec28>] (irq_set_irq_wake+0x8c/0xf8) [<c008ec28>] (irq_set_irq_wake) from [<c02cb8c0>] (gpio_keys_suspend+0x74/0xc0) [<c02cb8c0>] (gpio_keys_suspend) from [<c02ae8cc>] (dpm_run_callback+0x54/0x124) Avoid this false positive by using a separate lockdep class for IRQC interrupts. Signed-off-by: Geert Uytterhoeven <[email protected]> Cc: Grygorii Strashko <[email protected]> Cc: Magnus Damm <[email protected]> Cc: Jason Cooper <[email protected]> Link: http://lkml.kernel.org/r/1441798974-25716-2-git-send-email-geert%[email protected] Signed-off-by: Thomas Gleixner <[email protected]>

The renesas-intc-irqpin interrupt controller is cascaded to the GIC. Hence when propagating wake-up settings to its parent interrupt controller, the following lockdep warning is printed: ============================================= [ INFO: possible recursive locking detected ] 4.2.0-armadillo-10725-g50fcd7643c034198 torvalds#781 Not tainted --------------------------------------------- s2ram/1179 is trying to acquire lock: (&irq_desc_lock_class){-.-...}, at: [<c005bb54>] __irq_get_desc_lock+0x78/0x94 but task is already holding lock: (&irq_desc_lock_class){-.-...}, at: [<c005bb54>] __irq_get_desc_lock+0x78/0x94 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&irq_desc_lock_class); lock(&irq_desc_lock_class); *** DEADLOCK *** May be due to missing lock nesting notation 7 locks held by s2ram/1179: #0: (sb_writers#7){.+.+.+}, at: [<c00c9708>] __sb_start_write+0x64/0xb8 #1: (&of->mutex){+.+.+.}, at: [<c0125a00>] kernfs_fop_write+0x78/0x1a0 #2: (s_active#23){.+.+.+}, at: [<c0125a08>] kernfs_fop_write+0x80/0x1a0 #3: (autosleep_lock){+.+.+.}, at: [<c0058244>] pm_autosleep_lock+0x18/0x20 #4: (pm_mutex){+.+.+.}, at: [<c0057e50>] pm_suspend+0x54/0x248 #5: (&dev->mutex){......}, at: [<c0243a20>] __device_suspend+0xdc/0x240 #6: (&irq_desc_lock_class){-.-...}, at: [<c005bb54>] __irq_get_desc_lock+0x78/0x94 stack backtrace: CPU: 0 PID: 1179 Comm: s2ram Not tainted 4.2.0-armadillo-10725-g50fcd7643c034198 Hardware name: Generic R8A7740 (Flattened Device Tree) [<c00129f4>] (dump_backtrace) from [<c0012bec>] (show_stack+0x18/0x1c) [<c0012bd4>] (show_stack) from [<c03f5d94>] (dump_stack+0x20/0x28) [<c03f5d74>] (dump_stack) from [<c00514d4>] (__lock_acquire+0x67c/0x1b88) [<c0050e58>] (__lock_acquire) from [<c0052df8>] (lock_acquire+0x9c/0xbc) [<c0052d5c>] (lock_acquire) from [<c03fb068>] (_raw_spin_lock_irqsave+0x44/0x58) [<c03fb024>] (_raw_spin_lock_irqsave) from [<c005bb54>] (__irq_get_desc_lock+0x78/0x94 [<c005badc>] (__irq_get_desc_lock) from [<c005c3d8>] (irq_set_irq_wake+0x28/0x100) [<c005c3b0>] (irq_set_irq_wake) from [<c01e50d0>] (intc_irqpin_irq_set_wake+0x24/0x4c) [<c01e50ac>] (intc_irqpin_irq_set_wake) from [<c005c17c>] (set_irq_wake_real+0x3c/0x50 [<c005c140>] (set_irq_wake_real) from [<c005c414>] (irq_set_irq_wake+0x64/0x100) [<c005c3b0>] (irq_set_irq_wake) from [<c02a19b4>] (gpio_keys_suspend+0x60/0xa0) [<c02a1954>] (gpio_keys_suspend) from [<c023b750>] (platform_pm_suspend+0x3c/0x5c) Avoid this false positive by using a separate lockdep class for INTC External IRQ Pin interrupts. Signed-off-by: Geert Uytterhoeven <[email protected]> Cc: Grygorii Strashko <[email protected]> Cc: Magnus Damm <[email protected]> Cc: Jason Cooper <[email protected]> Link: http://lkml.kernel.org/r/1441798974-25716-3-git-send-email-geert%[email protected] Signed-off-by: Thomas Gleixner <[email protected]>

The OPP list needs to be protected against concurrent accesses. Using simple RCU read locks does the trick and gets rid of the following lockdep warning: =============================== [ INFO: suspicious RCU usage. ] 4.2.0-next-20150908 #1 Not tainted ------------------------------- drivers/base/power/opp.c:460 Missing rcu_read_lock() or dev_opp_list_lock protection! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 4 locks held by kworker/u8:0/6: #0: ("%s""deferwq"){++++.+}, at: [<c0040d8c>] process_one_work+0x118/0x4bc #1: (deferred_probe_work){+.+.+.}, at: [<c0040d8c>] process_one_work+0x118/0x4bc #2: (&dev->mutex){......}, at: [<c03b8194>] __device_attach+0x20/0x118 #3: (prepare_lock){+.+...}, at: [<c054bc08>] clk_prepare_lock+0x10/0xf8 stack backtrace: CPU: 2 PID: 6 Comm: kworker/u8:0 Not tainted 4.2.0-next-20150908 #1 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) Workqueue: deferwq deferred_probe_work_func [<c001802c>] (unwind_backtrace) from [<c00135a4>] (show_stack+0x10/0x14) [<c00135a4>] (show_stack) from [<c02a8418>] (dump_stack+0x94/0xd4) [<c02a8418>] (dump_stack) from [<c03c6f6c>] (dev_pm_opp_find_freq_ceil+0x108/0x114) [<c03c6f6c>] (dev_pm_opp_find_freq_ceil) from [<c0551a3c>] (dfll_calculate_rate_request+0xb8/0x170) [<c0551a3c>] (dfll_calculate_rate_request) from [<c0551b10>] (dfll_clk_round_rate+0x1c/0x2c) [<c0551b10>] (dfll_clk_round_rate) from [<c054de2c>] (clk_calc_new_rates+0x1b8/0x228) [<c054de2c>] (clk_calc_new_rates) from [<c054e44c>] (clk_core_set_rate_nolock+0x44/0xac) [<c054e44c>] (clk_core_set_rate_nolock) from [<c054e4d8>] (clk_set_rate+0x24/0x34) [<c054e4d8>] (clk_set_rate) from [<c0512460>] (tegra124_cpufreq_probe+0x120/0x230) [<c0512460>] (tegra124_cpufreq_probe) from [<c03b9cbc>] (platform_drv_probe+0x44/0xac) [<c03b9cbc>] (platform_drv_probe) from [<c03b84c8>] (driver_probe_device+0x218/0x304) [<c03b84c8>] (driver_probe_device) from [<c03b69b0>] (bus_for_each_drv+0x60/0x94) [<c03b69b0>] (bus_for_each_drv) from [<c03b8228>] (__device_attach+0xb4/0x118) ata1: SATA link down (SStatus 0 SControl 300) [<c03b8228>] (__device_attach) from [<c03b77c8>] (bus_probe_device+0x88/0x90) [<c03b77c8>] (bus_probe_device) from [<c03b7be8>] (deferred_probe_work_func+0x58/0x8c) [<c03b7be8>] (deferred_probe_work_func) from [<c0040dfc>] (process_one_work+0x188/0x4bc) [<c0040dfc>] (process_one_work) from [<c004117c>] (worker_thread+0x4c/0x4f4) [<c004117c>] (worker_thread) from [<c0047230>] (kthread+0xe4/0xf8) [<c0047230>] (kthread) from [<c000f7d0>] (ret_from_fork+0x14/0x24) Signed-off-by: Thierry Reding <[email protected]> Fixes: c4fe70a ("clk: tegra: Add closed loop support for the DFLL") [[email protected]: Unlock rcu on error path] Signed-off-by: Vince Hsu <[email protected]> [[email protected]: Dropped second hunk that nested the rcu read lock unnecessarily] Signed-off-by: Stephen Boyd <[email protected]>

…t initialized. In case something goes wrong with power well initialization we were calling intel_prepare_ddi during boot while encoder list isnt't initilized. [ 9.618747] i915 0000:00:02.0: Invalid ROM contents [ 9.631446] [drm] failed to find VBIOS tables [ 9.720036] BUG: unable to handle kernel NULL pointer dereference at 00000000 00000058 [ 9.721986] IP: [<ffffffffa014eb72>] ddi_get_encoder_port+0x82/0x190 [i915] [ 9.723736] PGD 0 [ 9.724286] Oops: 0000 [#1] PREEMPT SMP [ 9.725386] Modules linked in: intel_powerclamp snd_hda_intel(+) coretemp crc 32c_intel snd_hda_codec snd_hda_core serio_raw snd_pcm snd_timer i915(+) parport _pc parport pinctrl_sunrisepoint pinctrl_intel nfsd nfs_acl [ 9.730635] CPU: 0 PID: 497 Comm: systemd-udevd Not tainted 4.3.0-rc2-eywa-10 967-g72de2cfd-dirty #2 [ 9.732785] Hardware name: Intel Corporation Cannonlake Client platform/Skyla ke DT DDR4 RVP8, BIOS CNLSE2R1.R00.X021.B00.1508040310 08/04/2015 [ 9.735785] task: ffff88008a704700 ti: ffff88016a1ac000 task.ti: ffff88016a1a c000 [ 9.737584] RIP: 0010:[<ffffffffa014eb72>] [<ffffffffa014eb72>] ddi_get_enco der_port+0x82/0x190 [i915] [ 9.739934] RSP: 0000:ffff88016a1af710 EFLAGS: 00010296 [ 9.741184] RAX: 000000000000004e RBX: ffff88008a9edc98 RCX: 0000000000000001 [ 9.742934] RDX: 000000000000004e RSI: ffffffff81fc1e82 RDI: 00000000ffffffff [ 9.744634] RBP: ffff88016a1af730 R08: 0000000000000000 R09: 0000000000000578 [ 9.746333] R10: 0000000000001065 R11: 0000000000000578 R12: fffffffffffffff8 [ 9.748033] R13: ffff88016a1af7a8 R14: ffff88016a1af794 R15: 0000000000000000 [ 9.749733] FS: 00007eff2e1e07c0(0000) GS:ffff88016fc00000(0000) knlGS:00000 00000000000 [ 9.751683] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9.753083] CR2: 0000000000000058 CR3: 000000016922b000 CR4: 00000000003406f0 [ 9.754782] Stack: [ 9.755332] ffff88008a9edc98 ffff88008a9ed800 ffffffffa01d07b0 00000000fffb9 09e [ 9.757232] ffff88016a1af7d8 ffffffffa0154ea7 0000000000000246 ffff88016a370 080 [ 9.759182] ffff88016a370080 ffff88008a9ed800 0000000000000246 ffff88008a9ed c98 [ 9.761132] Call Trace: [ 9.761782] [<ffffffffa0154ea7>] intel_prepare_ddi+0x67/0x860 [i915] [ 9.763332] [<ffffffff81a56996>] ? _raw_spin_unlock_irqrestore+0x26/0x40 [ 9.765031] [<ffffffffa00fad01>] ? gen9_read32+0x141/0x360 [i915] [ 9.766531] [<ffffffffa00b43e1>] skl_set_power_well+0x431/0xa80 [i915] [ 9.768181] [<ffffffffa00b4a63>] skl_power_well_enable+0x13/0x20 [i915] [ 9.769781] [<ffffffffa00b2188>] intel_power_well_enable+0x28/0x50 [i915] [ 9.771481] [<ffffffffa00b4d52>] intel_display_power_get+0x92/0xc0 [i915] [ 9.773180] [<ffffffffa00b4fcb>] intel_display_set_init_power+0x3b/0x40 [i91 5] [ 9.774980] [<ffffffffa00b5170>] intel_power_domains_init_hw+0x120/0x520 [i9 15] [ 9.776780] [<ffffffffa0194c61>] i915_driver_load+0xb21/0xf40 [i915] So let's protect this case. My first attempt was to remove the intel_prepare_ddi, but Daniel had pointed out this is really needed to restore those registers values. And Imre pointed out that this case was without the flag protection and this was actually where things were going bad. So I've just checked and this indeed solves my issue. The regressing intel_prepare_ddi call was added in commit 1d2b952 Author: Damien Lespiau <[email protected]> Date: Fri Mar 6 18:50:53 2015 +0000 drm/i915/skl: Restore the DDI translation tables when enabling PW1 Cc: Imre Deak <[email protected]> Cc: Daniel Vetter <[email protected]> Signed-off-by: Rodrigo Vivi <[email protected]> Reviewed-by: Imre Deak <[email protected]> [Jani: regression reference] Signed-off-by: Jani Nikula <[email protected]>

Dmitry Vyukov reported the following using trinity and the memory error detector AddressSanitizer (https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerForKernel). [ 124.575597] ERROR: AddressSanitizer: heap-buffer-overflow on address ffff88002e280000 [ 124.576801] ffff88002e280000 is located 131938492886538 bytes to the left of 28857600-byte region [ffffffff81282e0a, ffffffff82e0830a) [ 124.578633] Accessed by thread T10915: [ 124.579295] inlined in describe_heap_address ./arch/x86/mm/asan/report.c:164 [ 124.579295] #0 ffffffff810dd277 in asan_report_error ./arch/x86/mm/asan/report.c:278 [ 124.580137] #1 ffffffff810dc6a0 in asan_check_region ./arch/x86/mm/asan/asan.c:37 [ 124.581050] #2 ffffffff810dd423 in __tsan_read8 ??:0 [ 124.581893] #3 ffffffff8107c093 in get_wchan ./arch/x86/kernel/process_64.c:444 The address checks in the 64bit implementation of get_wchan() are wrong in several ways: - The lower bound of the stack is not the start of the stack page. It's the start of the stack page plus sizeof (struct thread_info) - The upper bound must be: top_of_stack - TOP_OF_KERNEL_STACK_PADDING - 2 * sizeof(unsigned long). The 2 * sizeof(unsigned long) is required because the stack pointer points at the frame pointer. The layout on the stack is: ... IP FP ... IP FP. So we need to make sure that both IP and FP are in the bounds. Fix the bound checks and get rid of the mix of numeric constants, u64 and unsigned long. Making all unsigned long allows us to use the same function for 32bit as well. Use READ_ONCE() when accessing the stack. This does not prevent a concurrent wakeup of the task and the stack changing, but at least it avoids TOCTOU. Also check task state at the end of the loop. Again that does not prevent concurrent changes, but it avoids walking for nothing. Add proper comments while at it. Reported-by: Dmitry Vyukov <[email protected]> Reported-by: Sasha Levin <[email protected]> Based-on-patch-from: Wolfram Gloger <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Borislav Petkov <[email protected]> Reviewed-by: Dmitry Vyukov <[email protected]> Cc: Andrey Ryabinin <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Andrey Konovalov <[email protected]> Cc: Kostya Serebryany <[email protected]> Cc: Alexander Potapenko <[email protected]> Cc: kasan-dev <[email protected]> Cc: Denys Vlasenko <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Wolfram Gloger <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Thomas Gleixner <[email protected]>

Commit 1a3d595 ("MIPS: Tidy up FPU context switching") removed FP context saving from the asm-written resume function in favour of reusing existing code to perform the same task. However it only removed the FP context saving code from the r4k_switch.S implementation of resume. Octeon uses its own implementation in octeon_switch.S, so remove FP context saving there too in order to prevent attempting to save context twice. That formerly led to an exception from the second save as follows because the FPU had already been disabled by the first save: do_cpu invoked from kernel context![#1]: CPU: 0 PID: 2 Comm: kthreadd Not tainted 4.3.0-rc2-dirty #2 task: 800000041f84a008 ti: 800000041f864000 task.ti: 800000041f864000 $ 0 : 0000000000000000 0000000010008ce1 0000000000100000 ffffffffbfffffff $ 4 : 800000041f84a008 800000041f84ac08 800000041f84c000 0000000000000004 $ 8 : 0000000000000001 0000000000000000 0000000000000000 0000000000000001 $12 : 0000000010008ce3 0000000000119c60 0000000000000036 800000041f864000 $16 : 800000041f84ac08 800000000792ce80 800000041f84a008 ffffffff81758b00 $20 : 0000000000000000 ffffffff8175ae50 0000000000000000 ffffffff8176c740 $24 : 0000000000000006 ffffffff81170300 $28 : 800000041f864000 800000041f867d90 0000000000000000 ffffffff815f3fa0 Hi : 0000000000fa8257 Lo : ffffffffe15cfc00 epc : ffffffff8112821c resume+0x9c/0x200 ra : ffffffff815f3fa0 __schedule+0x3f0/0x7d8 Status: 10008ce2 KX SX UX KERNEL EXL Cause : 1080002c (ExcCode 0b) PrId : 000d0601 (Cavium Octeon+) Modules linked in: Process kthreadd (pid: 2, threadinfo=800000041f864000, task=800000041f84a008, tls=0000000000000000) Stack : ffffffff81604218 ffffffff815f7e08 800000041f84a008 ffffffff811681b0 800000041f84a008 ffffffff817e9878 0000000000000000 ffffffff81770000 ffffffff81768340 ffffffff81161398 0000000000000001 0000000000000000 0000000000000000 ffffffff815f4424 0000000000000000 ffffffff81161d68 ffffffff81161be8 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 ffffffff8111e16c 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 ... Call Trace: [<ffffffff8112821c>] resume+0x9c/0x200 [<ffffffff815f3fa0>] __schedule+0x3f0/0x7d8 [<ffffffff815f4424>] schedule+0x34/0x98 [<ffffffff81161d68>] kthreadd+0x180/0x198 [<ffffffff8111e16c>] ret_from_kernel_thread+0x14/0x1c Tested using cavium_octeon_defconfig on an EdgeRouter Lite. Fixes: 1a3d595 ("MIPS: Tidy up FPU context switching") Reported-by: Aaro Koskinen <[email protected]> Signed-off-by: Paul Burton <[email protected]> Cc: [email protected] Cc: Aleksey Makarov <[email protected]> Cc: [email protected] Cc: Chandrakala Chavva <[email protected]> Cc: David Daney <[email protected]> Cc: Leonid Rosenboim <[email protected]> Patchwork: https://patchwork.linux-mips.org/patch/11166/ Signed-off-by: Ralf Baechle <[email protected]>

My colleague ran into a program stall on a x86_64 server, where n_tty_read() was waiting for data even if there was data in the buffer in the pty. kernel stack for the stuck process looks like below. #0 [ffff88303d107b58] __schedule at ffffffff815c4b20 #1 [ffff88303d107bd0] schedule at ffffffff815c513e #2 [ffff88303d107bf0] schedule_timeout at ffffffff815c7818 #3 [ffff88303d107ca0] wait_woken at ffffffff81096bd2 #4 [ffff88303d107ce0] n_tty_read at ffffffff8136fa23 #5 [ffff88303d107dd0] tty_read at ffffffff81368013 #6 [ffff88303d107e20] __vfs_read at ffffffff811a3704 #7 [ffff88303d107ec0] vfs_read at ffffffff811a3a57 #8 [ffff88303d107f00] sys_read at ffffffff811a4306 #9 [ffff88303d107f50] entry_SYSCALL_64_fastpath at ffffffff815c86d7 There seems to be two problems causing this issue. First, in drivers/tty/n_tty.c, __receive_buf() stores the data and updates ldata->commit_head using smp_store_release() and then checks the wait queue using waitqueue_active(). However, since there is no memory barrier, __receive_buf() could return without calling wake_up_interactive_poll(), and at the same time, n_tty_read() could start to wait in wait_woken() as in the following chart. __receive_buf() n_tty_read() ------------------------------------------------------------------------ if (waitqueue_active(&tty->read_wait)) /* Memory operations issued after the RELEASE may be completed before the RELEASE operation has completed */ add_wait_queue(&tty->read_wait, &wait); ... if (!input_available_p(tty, 0)) { smp_store_release(&ldata->commit_head, ldata->read_head); ... timeout = wait_woken(&wait, TASK_INTERRUPTIBLE, timeout); ------------------------------------------------------------------------ The second problem is that n_tty_read() also lacks a memory barrier call and could also cause __receive_buf() to return without calling wake_up_interactive_poll(), and n_tty_read() to wait in wait_woken() as in the chart below. __receive_buf() n_tty_read() ------------------------------------------------------------------------ spin_lock_irqsave(&q->lock, flags); /* from add_wait_queue() */ ... if (!input_available_p(tty, 0)) { /* Memory operations issued after the RELEASE may be completed before the RELEASE operation has completed */ smp_store_release(&ldata->commit_head, ldata->read_head); if (waitqueue_active(&tty->read_wait)) __add_wait_queue(q, wait); spin_unlock_irqrestore(&q->lock,flags); /* from add_wait_queue() */ ... timeout = wait_woken(&wait, TASK_INTERRUPTIBLE, timeout); ------------------------------------------------------------------------ There are also other places in drivers/tty/n_tty.c which have similar calls to waitqueue_active(), so instead of adding many memory barrier calls, this patch simply removes the call to waitqueue_active(), leaving just wake_up*() behind. This fixes both problems because, even though the memory access before or after the spinlocks in both wake_up*() and add_wait_queue() can sneak into the critical section, it cannot go past it and the critical section assures that they will be serialized (please see "INTER-CPU ACQUIRING BARRIER EFFECTS" in Documentation/memory-barriers.txt for a better explanation). Moreover, the resulting code is much simpler. Latency measurement using a ping-pong test over a pty doesn't show any visible performance drop. Signed-off-by: Kosuke Tatsukawa <[email protected]> Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

When running kprobe test on arm64 rt kernel, it reports the below warning: root@qemu7:~# modprobe kprobe_example BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:917 in_atomic(): 0, irqs_disabled(): 128, pid: 484, name: modprobe CPU: 0 PID: 484 Comm: modprobe Not tainted 4.1.6-rt5 #2 Hardware name: linux,dummy-virt (DT) Call trace: [<ffffffc0000891b8>] dump_backtrace+0x0/0x128 [<ffffffc000089300>] show_stack+0x20/0x30 [<ffffffc00061dae8>] dump_stack+0x1c/0x28 [<ffffffc0000bbad0>] ___might_sleep+0x120/0x198 [<ffffffc0006223e8>] rt_spin_lock+0x28/0x40 [<ffffffc000622b30>] __aarch64_insn_write+0x28/0x78 [<ffffffc000622e48>] aarch64_insn_patch_text_nosync+0x18/0x48 [<ffffffc000622ee8>] aarch64_insn_patch_text_cb+0x70/0xa0 [<ffffffc000622f40>] aarch64_insn_patch_text_sync+0x28/0x48 [<ffffffc0006236e0>] arch_arm_kprobe+0x38/0x48 [<ffffffc00010e6f4>] arm_kprobe+0x34/0x50 [<ffffffc000110374>] register_kprobe+0x4cc/0x5b8 [<ffffffbffc002038>] kprobe_init+0x38/0x7c [kprobe_example] [<ffffffc000084240>] do_one_initcall+0x90/0x1b0 [<ffffffc00061c498>] do_init_module+0x6c/0x1cc [<ffffffc0000fd0c0>] load_module+0x17f8/0x1db0 [<ffffffc0000fd8cc>] SyS_finit_module+0xb4/0xc8 Convert patch_lock to raw loc kto avoid this issue. Although the problem is found on rt kernel, the fix should be applicable to mainline kernel too. Acked-by: Steven Rostedt <[email protected]> Signed-off-by: Yang Shi <[email protected]> Signed-off-by: Will Deacon <[email protected]>

When freqdomain_cpus attribute is read from an offlined cpu, it will cause crash. This change prevents calling cpufreq_show_cpus when policy driver_data is NULL. Crash info: [ 170.814949] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 [ 170.814990] IP: [<ffffffff813b2490>] _find_next_bit.part.0+0x10/0x70 [ 170.815021] PGD 227d30067 PUD 229e56067 PMD 0 [ 170.815043] Oops: 0000 [#2] SMP [ 170.816022] CPU: 3 PID: 3121 Comm: cat Tainted: G D OE 4.3.0-rc3+ #33 ... ... [ 170.816657] Call Trace: [ 170.816672] [<ffffffff813b2505>] ? find_next_bit+0x15/0x20 [ 170.816696] [<ffffffff8160e47c>] cpufreq_show_cpus+0x5c/0xd0 [ 170.816722] [<ffffffffa031a409>] show_freqdomain_cpus+0x19/0x20 [acpi_cpufreq] [ 170.816749] [<ffffffff8160e65b>] show+0x3b/0x60 [ 170.816769] [<ffffffff8129b31c>] sysfs_kf_seq_show+0xbc/0x130 [ 170.816793] [<ffffffff81299be3>] kernfs_seq_show+0x23/0x30 [ 170.816816] [<ffffffff81240f2c>] seq_read+0xec/0x390 [ 170.816837] [<ffffffff8129a64a>] kernfs_fop_read+0x10a/0x160 [ 170.816861] [<ffffffff8121d9b7>] __vfs_read+0x37/0x100 [ 170.816883] [<ffffffff813217c0>] ? security_file_permission+0xa0/0xc0 [ 170.816909] [<ffffffff8121e2e3>] vfs_read+0x83/0x130 [ 170.816930] [<ffffffff8121f035>] SyS_read+0x55/0xc0 ... ... [ 170.817185] ---[ end trace bc6eadf82b2b965a ]--- Signed-off-by: Srinivas Pandruvada <[email protected]> Acked-by: Viresh Kumar <[email protected]> Cc: 4.2+ <[email protected]> # 4.2+ Signed-off-by: Rafael J. Wysocki <[email protected]>

…_BH() in preemptible context. [ Upstream commit 44f49dd ] Fixes the following kernel BUG : BUG: using __this_cpu_add() in preemptible [00000000] code: bash/2758 caller is __this_cpu_preempt_check+0x13/0x15 CPU: 0 PID: 2758 Comm: bash Tainted: P O 3.18.19 #2 ffffffff8170eaca ffff880110d1b788 ffffffff81482b2a 0000000000000000 0000000000000000 ffff880110d1b7b8 ffffffff812010ae ffff880007cab800 ffff88001a060800 ffff88013a899108 ffff880108b84240 ffff880110d1b7c8 Call Trace: [<ffffffff81482b2a>] dump_stack+0x52/0x80 [<ffffffff812010ae>] check_preemption_disabled+0xce/0xe1 [<ffffffff812010d4>] __this_cpu_preempt_check+0x13/0x15 [<ffffffff81419d60>] ipmr_queue_xmit+0x647/0x70c [<ffffffff8141a154>] ip_mr_forward+0x32f/0x34e [<ffffffff8141af76>] ip_mroute_setsockopt+0xe03/0x108c [<ffffffff810553fc>] ? get_parent_ip+0x11/0x42 [<ffffffff810e6974>] ? pollwake+0x4d/0x51 [<ffffffff81058ac0>] ? default_wake_function+0x0/0xf [<ffffffff810553fc>] ? get_parent_ip+0x11/0x42 [<ffffffff810613d9>] ? __wake_up_common+0x45/0x77 [<ffffffff81486ea9>] ? _raw_spin_unlock_irqrestore+0x1d/0x32 [<ffffffff810618bc>] ? __wake_up_sync_key+0x4a/0x53 [<ffffffff8139a519>] ? sock_def_readable+0x71/0x75 [<ffffffff813dd226>] do_ip_setsockopt+0x9d/0xb55 [<ffffffff81429818>] ? unix_seqpacket_sendmsg+0x3f/0x41 [<ffffffff813963fe>] ? sock_sendmsg+0x6d/0x86 [<ffffffff813959d4>] ? sockfd_lookup_light+0x12/0x5d [<ffffffff8139650a>] ? SyS_sendto+0xf3/0x11b [<ffffffff810d5738>] ? new_sync_read+0x82/0xaa [<ffffffff813ddd19>] compat_ip_setsockopt+0x3b/0x99 [<ffffffff813fb24a>] compat_raw_setsockopt+0x11/0x32 [<ffffffff81399052>] compat_sock_common_setsockopt+0x18/0x1f [<ffffffff813c4d05>] compat_SyS_setsockopt+0x1a9/0x1cf [<ffffffff813c4149>] compat_SyS_socketcall+0x180/0x1e3 [<ffffffff81488ea1>] cstar_dispatch+0x7/0x1e Signed-off-by: Ani Sinha <[email protected]> Acked-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 1f9c6e1 upstream. There were several bugs here. 1) The done label was in the wrong place so we didn't copy any information out when there was no command given. 2) We were using PAGE_SIZE as the size of the buffer instead of "PAGE_SIZE - pos". 3) snprintf() returns the number of characters that would have been printed if there were enough space. If there was not enough space (and we had fixed the memory corruption bug #2) then it would result in an information leak when we do simple_read_from_buffer(). I've changed it to use scnprintf() instead. I also removed the initialization at the start of the function, because I thought it made the code a little more clear. Fixes: 5e6e3a9 ('wireless: mwifiex: initial commit for Marvell mwifiex driver') Signed-off-by: Dan Carpenter <[email protected]> Acked-by: Amitkumar Karwar <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

@s

commit cc25b99 upstream. This fixes CVE-2015-5327. It affects kernels from 4.3-rc1 onwards. Fix the X.509 time validation to use month number-1 when looking up the number of days in that month. Also put the month number validation before doing the lookup so as not to risk overrunning the array. This can be tested by doing the following: cat <<EOF | openssl x509 -outform DER | keyctl padd asymmetric "" @s -----BEGIN CERTIFICATE----- MIIDbjCCAlagAwIBAgIJAN/lUld+VR4hMA0GCSqGSIb3DQEBCwUAMCkxETAPBgNV BAoMCGxvY2FsLWNhMRQwEgYDVQQDDAtzaWduaW5nIGtleTAeFw0xNTA5MDEyMTMw MThaFw0xNjA4MzEyMTMwMThaMCkxETAPBgNVBAoMCGxvY2FsLWNhMRQwEgYDVQQD DAtzaWduaW5nIGtleTCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBANrn crcMfMeG67nagX4+m02Xk9rkmsMKI5XTUxbikROe7GSUVJ27sPVPZp4mgzoWlvhh jfK8CC/qhEhwep8Pgg4EJZyWOjhZb7R97ckGvLIoUC6IO3FC2ZnR7WtmWDgo2Jcj VlXwJdHhKU1VZwulh81O61N8IBKqz2r/kDhIWiicUCUkI/Do/RMRfKAoDBcSh86m gOeIAGfq62vbiZhVsX5dOE8Oo2TK5weAvwUIOR7OuGBl5AqwFlPnXQolewiHzKry THg9e44HfzG4Mi6wUvcJxVaQT1h5SrKD779Z5+8+wf1JLaooetcEUArvWyuxCU59 qxA4lsTjBwl4cmEki+cCAwEAAaOBmDCBlTAMBgNVHRMEBTADAQH/MAsGA1UdDwQE AwIHgDAdBgNVHQ4EFgQUyND/eKUis7ep/hXMJ8iZMdUhI+IwWQYDVR0jBFIwUIAU yND/eKUis7ep/hXMJ8iZMdUhI+KhLaQrMCkxETAPBgNVBAoMCGxvY2FsLWNhMRQw EgYDVQQDDAtzaWduaW5nIGtleYIJAN/lUld+VR4hMA0GCSqGSIb3DQEBCwUAA4IB AQAMqm1N1yD5pimUELLhT5eO2lRdGUfTozljRxc7e2QT3RLk2TtGhg65JFFN6eml XS58AEPVcAsSLDlR6WpOpOLB2giM0+fV/eYFHHmh22yqTJl4YgkdUwyzPdCHNOZL hmSKeY9xliHb6PNrNWWtZwhYYvRaO2DX4GXOMR0Oa2O4vaYu6/qGlZOZv3U6qZLY wwHEJSrqeBDyMuwN+eANHpoSpiBzD77S4e+7hUDJnql4j6xzJ65+nWJ89fCrQypR 4sN5R3aGeIh3QAQUIKpHilwek0CtEaYERgc5m+jGyKSc1rezJW62hWRTaitOc+d5 G5hh+9YpnYcxQHEKnZ7rFNKJ -----END CERTIFICATE----- EOF If it works, it emit a key ID; if it fails, it should give a bad message error. Reported-by: Mimi Zohar <[email protected]> Signed-off-by: David Howells <[email protected]> Tested-by: Mimi Zohar <[email protected]> Acked-by: David Woodhouse <[email protected]> Signed-off-by: James Morris <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit b4fe85f ] Drivers like vxlan use the recently introduced udp_tunnel_xmit_skb/udp_tunnel6_xmit_skb APIs. udp_tunnel6_xmit_skb makes use of ip6tunnel_xmit, and ip6tunnel_xmit, after sending the packet, updates the struct stats using the usual u64_stats_update_begin/end calls on this_cpu_ptr(dev->tstats). udp_tunnel_xmit_skb makes use of iptunnel_xmit, which doesn't touch tstats, so drivers like vxlan, immediately after, call iptunnel_xmit_stats, which does the same thing - calls u64_stats_update_begin/end on this_cpu_ptr(dev->tstats). While vxlan is probably fine (I don't know?), calling a similar function from, say, an unbound workqueue, on a fully preemptable kernel causes real issues: [ 188.434537] BUG: using smp_processor_id() in preemptible [00000000] code: kworker/u8:0/6 [ 188.435579] caller is debug_smp_processor_id+0x17/0x20 [ 188.435583] CPU: 0 PID: 6 Comm: kworker/u8:0 Not tainted 4.2.6 #2 [ 188.435607] Call Trace: [ 188.435611] [<ffffffff8234e936>] dump_stack+0x4f/0x7b [ 188.435615] [<ffffffff81915f3d>] check_preemption_disabled+0x19d/0x1c0 [ 188.435619] [<ffffffff81915f77>] debug_smp_processor_id+0x17/0x20 The solution would be to protect the whole this_cpu_ptr(dev->tstats)/u64_stats_update_begin/end blocks with disabling preemption and then reenabling it. Signed-off-by: Jason A. Donenfeld <[email protected]> Acked-by: Hannes Frederic Sowa <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 1b8e6a0 ] When a passive TCP is created, we eventually call tcp_md5_do_add() with sk pointing to the child. It is not owner by the user yet (we will add this socket into listener accept queue a bit later anyway) But we do own the spinlock, so amend the lockdep annotation to avoid following splat : [ 8451.090932] net/ipv4/tcp_ipv4.c:923 suspicious rcu_dereference_protected() usage! [ 8451.090932] [ 8451.090932] other info that might help us debug this: [ 8451.090932] [ 8451.090934] [ 8451.090934] rcu_scheduler_active = 1, debug_locks = 1 [ 8451.090936] 3 locks held by socket_sockopt_/214795: [ 8451.090936] #0: (rcu_read_lock){.+.+..}, at: [<ffffffff855c6ac1>] __netif_receive_skb_core+0x151/0xe90 [ 8451.090947] #1: (rcu_read_lock){.+.+..}, at: [<ffffffff85618143>] ip_local_deliver_finish+0x43/0x2b0 [ 8451.090952] #2: (slock-AF_INET){+.-...}, at: [<ffffffff855acda5>] sk_clone_lock+0x1c5/0x500 [ 8451.090958] [ 8451.090958] stack backtrace: [ 8451.090960] CPU: 7 PID: 214795 Comm: socket_sockopt_ [ 8451.091215] Call Trace: [ 8451.091216] <IRQ> [<ffffffff856fb29c>] dump_stack+0x55/0x76 [ 8451.091229] [<ffffffff85123b5b>] lockdep_rcu_suspicious+0xeb/0x110 [ 8451.091235] [<ffffffff8564544f>] tcp_md5_do_add+0x1bf/0x1e0 [ 8451.091239] [<ffffffff85645751>] tcp_v4_syn_recv_sock+0x1f1/0x4c0 [ 8451.091242] [<ffffffff85642b27>] ? tcp_v4_md5_hash_skb+0x167/0x190 [ 8451.091246] [<ffffffff85647c78>] tcp_check_req+0x3c8/0x500 [ 8451.091249] [<ffffffff856451ae>] ? tcp_v4_inbound_md5_hash+0x11e/0x190 [ 8451.091253] [<ffffffff85647170>] tcp_v4_rcv+0x3c0/0x9f0 [ 8451.091256] [<ffffffff85618143>] ? ip_local_deliver_finish+0x43/0x2b0 [ 8451.091260] [<ffffffff856181b6>] ip_local_deliver_finish+0xb6/0x2b0 [ 8451.091263] [<ffffffff85618143>] ? ip_local_deliver_finish+0x43/0x2b0 [ 8451.091267] [<ffffffff85618d38>] ip_local_deliver+0x48/0x80 [ 8451.091270] [<ffffffff85618510>] ip_rcv_finish+0x160/0x700 [ 8451.091273] [<ffffffff8561900e>] ip_rcv+0x29e/0x3d0 [ 8451.091277] [<ffffffff855c74b7>] __netif_receive_skb_core+0xb47/0xe90 Fixes: a8afca0 ("tcp: md5: protects md5sig_info with RCU") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: Willem de Bruijn <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

Kernel testing triggered this warning: | WARNING: CPU: 0 PID: 13 at kernel/sched/core.c:1156 do_set_cpus_allowed+0x7e/0x80() | Modules linked in: | CPU: 0 PID: 13 Comm: migration/0 Not tainted 4.2.0-rc1-00049-g25834c7 openbmc#2 | Call Trace: | dump_stack+0x4b/0x75 | warn_slowpath_common+0x8b/0xc0 | warn_slowpath_null+0x22/0x30 | do_set_cpus_allowed+0x7e/0x80 | cpuset_cpus_allowed_fallback+0x7c/0x170 | select_fallback_rq+0x221/0x280 | migration_call+0xe3/0x250 | notifier_call_chain+0x53/0x70 | __raw_notifier_call_chain+0x1e/0x30 | cpu_notify+0x28/0x50 | take_cpu_down+0x22/0x40 | multi_cpu_stop+0xd5/0x140 | cpu_stopper_thread+0xbc/0x170 | smpboot_thread_fn+0x174/0x2f0 | kthread+0xc4/0xe0 | ret_from_kernel_thread+0x21/0x30 As Peterz pointed out: | So the normal rules for changing task_struct::cpus_allowed are holding | both pi_lock and rq->lock, such that holding either stabilizes the mask. | | This is so that wakeup can happen without rq->lock and load-balance | without pi_lock. | | From this we already get the relaxation that we can omit acquiring | rq->lock if the task is not on the rq, because in that case | load-balancing will not apply to it. | | ** these are the rules currently tested in do_set_cpus_allowed() ** | | Now, since __set_cpus_allowed_ptr() uses task_rq_lock() which | unconditionally acquires both locks, we could get away with holding just | rq->lock when on_rq for modification because that'd still exclude | __set_cpus_allowed_ptr(), it would also work against | __kthread_bind_mask() because that assumes !on_rq. | | That said, this is all somewhat fragile. | | Now, I don't think dropping rq->lock is quite as disastrous as it | usually is because !cpu_active at this point, which means load-balance | will not interfere, but that too is somewhat fragile. | | So we end up with a choice of two fragile.. This patch fixes it by following the rules for changing task_struct::cpus_allowed with both pi_lock and rq->lock held. Reported-by: kernel test robot <[email protected]> Reported-by: Sasha Levin <[email protected]> Signed-off-by: Wanpeng Li <[email protected]> [ Modified changelog and patch. ] Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>

The renesas-irqc interrupt controller is cascaded to the GIC. Hence when propagating wake-up settings to its parent interrupt controller, the following lockdep warning is printed: ============================================= [ INFO: possible recursive locking detected ] 4.2.0-ape6evm-10725-g50fcd7643c034198 torvalds#280 Not tainted --------------------------------------------- s2ram/1072 is trying to acquire lock: (&irq_desc_lock_class){-.-...}, at: [<c008d3fc>] __irq_get_desc_lock+0x58/0x98 but task is already holding lock: (&irq_desc_lock_class){-.-...}, at: [<c008d3fc>] __irq_get_desc_lock+0x58/0x98 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&irq_desc_lock_class); lock(&irq_desc_lock_class); *** DEADLOCK *** May be due to missing lock nesting notation 6 locks held by s2ram/1072: #0: (sb_writers#7){.+.+.+}, at: [<c012eb14>] __sb_start_write+0xa0/0xa8 openbmc#1: (&of->mutex){+.+.+.}, at: [<c019396c>] kernfs_fop_write+0x4c/0x1bc openbmc#2: (s_active#24){.+.+.+}, at: [<c0193974>] kernfs_fop_write+0x54/0x1bc openbmc#3: (pm_mutex){+.+.+.}, at: [<c008213c>] pm_suspend+0x10c/0x510 openbmc#4: (&dev->mutex){......}, at: [<c02af3c4>] __device_suspend+0xdc/0x2cc openbmc#5: (&irq_desc_lock_class){-.-...}, at: [<c008d3fc>] __irq_get_desc_lock+0x58/0x98 stack backtrace: CPU: 0 PID: 1072 Comm: s2ram Not tainted 4.2.0-ape6evm-10725-g50fcd7643c034198 torvalds#280 Hardware name: Generic R8A73A4 (Flattened Device Tree) [<c0018078>] (unwind_backtrace) from [<c00144f0>] (show_stack+0x10/0x14) [<c00144f0>] (show_stack) from [<c0451f14>] (dump_stack+0x88/0x98) [<c0451f14>] (dump_stack) from [<c007b29c>] (__lock_acquire+0x15cc/0x20e4) [<c007b29c>] (__lock_acquire) from [<c007c6e0>] (lock_acquire+0xac/0x12c) [<c007c6e0>] (lock_acquire) from [<c0457c00>] (_raw_spin_lock_irqsave+0x40/0x54) [<c0457c00>] (_raw_spin_lock_irqsave) from [<c008d3fc>] (__irq_get_desc_lock+0x58/0x98) [<c008d3fc>] (__irq_get_desc_lock) from [<c008ebbc>] (irq_set_irq_wake+0x20/0xf8) [<c008ebbc>] (irq_set_irq_wake) from [<c0260770>] (irqc_irq_set_wake+0x20/0x4c) [<c0260770>] (irqc_irq_set_wake) from [<c008ec28>] (irq_set_irq_wake+0x8c/0xf8) [<c008ec28>] (irq_set_irq_wake) from [<c02cb8c0>] (gpio_keys_suspend+0x74/0xc0) [<c02cb8c0>] (gpio_keys_suspend) from [<c02ae8cc>] (dpm_run_callback+0x54/0x124) Avoid this false positive by using a separate lockdep class for IRQC interrupts. Signed-off-by: Geert Uytterhoeven <[email protected]> Cc: Grygorii Strashko <[email protected]> Cc: Magnus Damm <[email protected]> Cc: Jason Cooper <[email protected]> Link: http://lkml.kernel.org/r/1441798974-25716-2-git-send-email-geert%[email protected] Signed-off-by: Thomas Gleixner <[email protected]>

The renesas-intc-irqpin interrupt controller is cascaded to the GIC. Hence when propagating wake-up settings to its parent interrupt controller, the following lockdep warning is printed: ============================================= [ INFO: possible recursive locking detected ] 4.2.0-armadillo-10725-g50fcd7643c034198 torvalds#781 Not tainted --------------------------------------------- s2ram/1179 is trying to acquire lock: (&irq_desc_lock_class){-.-...}, at: [<c005bb54>] __irq_get_desc_lock+0x78/0x94 but task is already holding lock: (&irq_desc_lock_class){-.-...}, at: [<c005bb54>] __irq_get_desc_lock+0x78/0x94 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&irq_desc_lock_class); lock(&irq_desc_lock_class); *** DEADLOCK *** May be due to missing lock nesting notation 7 locks held by s2ram/1179: #0: (sb_writers#7){.+.+.+}, at: [<c00c9708>] __sb_start_write+0x64/0xb8 openbmc#1: (&of->mutex){+.+.+.}, at: [<c0125a00>] kernfs_fop_write+0x78/0x1a0 openbmc#2: (s_active#23){.+.+.+}, at: [<c0125a08>] kernfs_fop_write+0x80/0x1a0 openbmc#3: (autosleep_lock){+.+.+.}, at: [<c0058244>] pm_autosleep_lock+0x18/0x20 openbmc#4: (pm_mutex){+.+.+.}, at: [<c0057e50>] pm_suspend+0x54/0x248 openbmc#5: (&dev->mutex){......}, at: [<c0243a20>] __device_suspend+0xdc/0x240 openbmc#6: (&irq_desc_lock_class){-.-...}, at: [<c005bb54>] __irq_get_desc_lock+0x78/0x94 stack backtrace: CPU: 0 PID: 1179 Comm: s2ram Not tainted 4.2.0-armadillo-10725-g50fcd7643c034198 Hardware name: Generic R8A7740 (Flattened Device Tree) [<c00129f4>] (dump_backtrace) from [<c0012bec>] (show_stack+0x18/0x1c) [<c0012bd4>] (show_stack) from [<c03f5d94>] (dump_stack+0x20/0x28) [<c03f5d74>] (dump_stack) from [<c00514d4>] (__lock_acquire+0x67c/0x1b88) [<c0050e58>] (__lock_acquire) from [<c0052df8>] (lock_acquire+0x9c/0xbc) [<c0052d5c>] (lock_acquire) from [<c03fb068>] (_raw_spin_lock_irqsave+0x44/0x58) [<c03fb024>] (_raw_spin_lock_irqsave) from [<c005bb54>] (__irq_get_desc_lock+0x78/0x94 [<c005badc>] (__irq_get_desc_lock) from [<c005c3d8>] (irq_set_irq_wake+0x28/0x100) [<c005c3b0>] (irq_set_irq_wake) from [<c01e50d0>] (intc_irqpin_irq_set_wake+0x24/0x4c) [<c01e50ac>] (intc_irqpin_irq_set_wake) from [<c005c17c>] (set_irq_wake_real+0x3c/0x50 [<c005c140>] (set_irq_wake_real) from [<c005c414>] (irq_set_irq_wake+0x64/0x100) [<c005c3b0>] (irq_set_irq_wake) from [<c02a19b4>] (gpio_keys_suspend+0x60/0xa0) [<c02a1954>] (gpio_keys_suspend) from [<c023b750>] (platform_pm_suspend+0x3c/0x5c) Avoid this false positive by using a separate lockdep class for INTC External IRQ Pin interrupts. Signed-off-by: Geert Uytterhoeven <[email protected]> Cc: Grygorii Strashko <[email protected]> Cc: Magnus Damm <[email protected]> Cc: Jason Cooper <[email protected]> Link: http://lkml.kernel.org/r/1441798974-25716-3-git-send-email-geert%[email protected] Signed-off-by: Thomas Gleixner <[email protected]>

The OPP list needs to be protected against concurrent accesses. Using simple RCU read locks does the trick and gets rid of the following lockdep warning: =============================== [ INFO: suspicious RCU usage. ] 4.2.0-next-20150908 openbmc#1 Not tainted ------------------------------- drivers/base/power/opp.c:460 Missing rcu_read_lock() or dev_opp_list_lock protection! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 4 locks held by kworker/u8:0/6: #0: ("%s""deferwq"){++++.+}, at: [<c0040d8c>] process_one_work+0x118/0x4bc openbmc#1: (deferred_probe_work){+.+.+.}, at: [<c0040d8c>] process_one_work+0x118/0x4bc openbmc#2: (&dev->mutex){......}, at: [<c03b8194>] __device_attach+0x20/0x118 openbmc#3: (prepare_lock){+.+...}, at: [<c054bc08>] clk_prepare_lock+0x10/0xf8 stack backtrace: CPU: 2 PID: 6 Comm: kworker/u8:0 Not tainted 4.2.0-next-20150908 openbmc#1 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) Workqueue: deferwq deferred_probe_work_func [<c001802c>] (unwind_backtrace) from [<c00135a4>] (show_stack+0x10/0x14) [<c00135a4>] (show_stack) from [<c02a8418>] (dump_stack+0x94/0xd4) [<c02a8418>] (dump_stack) from [<c03c6f6c>] (dev_pm_opp_find_freq_ceil+0x108/0x114) [<c03c6f6c>] (dev_pm_opp_find_freq_ceil) from [<c0551a3c>] (dfll_calculate_rate_request+0xb8/0x170) [<c0551a3c>] (dfll_calculate_rate_request) from [<c0551b10>] (dfll_clk_round_rate+0x1c/0x2c) [<c0551b10>] (dfll_clk_round_rate) from [<c054de2c>] (clk_calc_new_rates+0x1b8/0x228) [<c054de2c>] (clk_calc_new_rates) from [<c054e44c>] (clk_core_set_rate_nolock+0x44/0xac) [<c054e44c>] (clk_core_set_rate_nolock) from [<c054e4d8>] (clk_set_rate+0x24/0x34) [<c054e4d8>] (clk_set_rate) from [<c0512460>] (tegra124_cpufreq_probe+0x120/0x230) [<c0512460>] (tegra124_cpufreq_probe) from [<c03b9cbc>] (platform_drv_probe+0x44/0xac) [<c03b9cbc>] (platform_drv_probe) from [<c03b84c8>] (driver_probe_device+0x218/0x304) [<c03b84c8>] (driver_probe_device) from [<c03b69b0>] (bus_for_each_drv+0x60/0x94) [<c03b69b0>] (bus_for_each_drv) from [<c03b8228>] (__device_attach+0xb4/0x118) ata1: SATA link down (SStatus 0 SControl 300) [<c03b8228>] (__device_attach) from [<c03b77c8>] (bus_probe_device+0x88/0x90) [<c03b77c8>] (bus_probe_device) from [<c03b7be8>] (deferred_probe_work_func+0x58/0x8c) [<c03b7be8>] (deferred_probe_work_func) from [<c0040dfc>] (process_one_work+0x188/0x4bc) [<c0040dfc>] (process_one_work) from [<c004117c>] (worker_thread+0x4c/0x4f4) [<c004117c>] (worker_thread) from [<c0047230>] (kthread+0xe4/0xf8) [<c0047230>] (kthread) from [<c000f7d0>] (ret_from_fork+0x14/0x24) Signed-off-by: Thierry Reding <[email protected]> Fixes: c4fe70a ("clk: tegra: Add closed loop support for the DFLL") [[email protected]: Unlock rcu on error path] Signed-off-by: Vince Hsu <[email protected]> [[email protected]: Dropped second hunk that nested the rcu read lock unnecessarily] Signed-off-by: Stephen Boyd <[email protected]>

…t initialized. In case something goes wrong with power well initialization we were calling intel_prepare_ddi during boot while encoder list isnt't initilized. [ 9.618747] i915 0000:00:02.0: Invalid ROM contents [ 9.631446] [drm] failed to find VBIOS tables [ 9.720036] BUG: unable to handle kernel NULL pointer dereference at 00000000 00000058 [ 9.721986] IP: [<ffffffffa014eb72>] ddi_get_encoder_port+0x82/0x190 [i915] [ 9.723736] PGD 0 [ 9.724286] Oops: 0000 [openbmc#1] PREEMPT SMP [ 9.725386] Modules linked in: intel_powerclamp snd_hda_intel(+) coretemp crc 32c_intel snd_hda_codec snd_hda_core serio_raw snd_pcm snd_timer i915(+) parport _pc parport pinctrl_sunrisepoint pinctrl_intel nfsd nfs_acl [ 9.730635] CPU: 0 PID: 497 Comm: systemd-udevd Not tainted 4.3.0-rc2-eywa-10 967-g72de2cfd-dirty openbmc#2 [ 9.732785] Hardware name: Intel Corporation Cannonlake Client platform/Skyla ke DT DDR4 RVP8, BIOS CNLSE2R1.R00.X021.B00.1508040310 08/04/2015 [ 9.735785] task: ffff88008a704700 ti: ffff88016a1ac000 task.ti: ffff88016a1a c000 [ 9.737584] RIP: 0010:[<ffffffffa014eb72>] [<ffffffffa014eb72>] ddi_get_enco der_port+0x82/0x190 [i915] [ 9.739934] RSP: 0000:ffff88016a1af710 EFLAGS: 00010296 [ 9.741184] RAX: 000000000000004e RBX: ffff88008a9edc98 RCX: 0000000000000001 [ 9.742934] RDX: 000000000000004e RSI: ffffffff81fc1e82 RDI: 00000000ffffffff [ 9.744634] RBP: ffff88016a1af730 R08: 0000000000000000 R09: 0000000000000578 [ 9.746333] R10: 0000000000001065 R11: 0000000000000578 R12: fffffffffffffff8 [ 9.748033] R13: ffff88016a1af7a8 R14: ffff88016a1af794 R15: 0000000000000000 [ 9.749733] FS: 00007eff2e1e07c0(0000) GS:ffff88016fc00000(0000) knlGS:00000 00000000000 [ 9.751683] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9.753083] CR2: 0000000000000058 CR3: 000000016922b000 CR4: 00000000003406f0 [ 9.754782] Stack: [ 9.755332] ffff88008a9edc98 ffff88008a9ed800 ffffffffa01d07b0 00000000fffb9 09e [ 9.757232] ffff88016a1af7d8 ffffffffa0154ea7 0000000000000246 ffff88016a370 080 [ 9.759182] ffff88016a370080 ffff88008a9ed800 0000000000000246 ffff88008a9ed c98 [ 9.761132] Call Trace: [ 9.761782] [<ffffffffa0154ea7>] intel_prepare_ddi+0x67/0x860 [i915] [ 9.763332] [<ffffffff81a56996>] ? _raw_spin_unlock_irqrestore+0x26/0x40 [ 9.765031] [<ffffffffa00fad01>] ? gen9_read32+0x141/0x360 [i915] [ 9.766531] [<ffffffffa00b43e1>] skl_set_power_well+0x431/0xa80 [i915] [ 9.768181] [<ffffffffa00b4a63>] skl_power_well_enable+0x13/0x20 [i915] [ 9.769781] [<ffffffffa00b2188>] intel_power_well_enable+0x28/0x50 [i915] [ 9.771481] [<ffffffffa00b4d52>] intel_display_power_get+0x92/0xc0 [i915] [ 9.773180] [<ffffffffa00b4fcb>] intel_display_set_init_power+0x3b/0x40 [i91 5] [ 9.774980] [<ffffffffa00b5170>] intel_power_domains_init_hw+0x120/0x520 [i9 15] [ 9.776780] [<ffffffffa0194c61>] i915_driver_load+0xb21/0xf40 [i915] So let's protect this case. My first attempt was to remove the intel_prepare_ddi, but Daniel had pointed out this is really needed to restore those registers values. And Imre pointed out that this case was without the flag protection and this was actually where things were going bad. So I've just checked and this indeed solves my issue. The regressing intel_prepare_ddi call was added in commit 1d2b952 Author: Damien Lespiau <[email protected]> Date: Fri Mar 6 18:50:53 2015 +0000 drm/i915/skl: Restore the DDI translation tables when enabling PW1 Cc: Imre Deak <[email protected]> Cc: Daniel Vetter <[email protected]> Signed-off-by: Rodrigo Vivi <[email protected]> Reviewed-by: Imre Deak <[email protected]> [Jani: regression reference] Signed-off-by: Jani Nikula <[email protected]>

Dmitry Vyukov reported the following using trinity and the memory error detector AddressSanitizer (https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerForKernel). [ 124.575597] ERROR: AddressSanitizer: heap-buffer-overflow on address ffff88002e280000 [ 124.576801] ffff88002e280000 is located 131938492886538 bytes to the left of 28857600-byte region [ffffffff81282e0a, ffffffff82e0830a) [ 124.578633] Accessed by thread T10915: [ 124.579295] inlined in describe_heap_address ./arch/x86/mm/asan/report.c:164 [ 124.579295] #0 ffffffff810dd277 in asan_report_error ./arch/x86/mm/asan/report.c:278 [ 124.580137] openbmc#1 ffffffff810dc6a0 in asan_check_region ./arch/x86/mm/asan/asan.c:37 [ 124.581050] openbmc#2 ffffffff810dd423 in __tsan_read8 ??:0 [ 124.581893] openbmc#3 ffffffff8107c093 in get_wchan ./arch/x86/kernel/process_64.c:444 The address checks in the 64bit implementation of get_wchan() are wrong in several ways: - The lower bound of the stack is not the start of the stack page. It's the start of the stack page plus sizeof (struct thread_info) - The upper bound must be: top_of_stack - TOP_OF_KERNEL_STACK_PADDING - 2 * sizeof(unsigned long). The 2 * sizeof(unsigned long) is required because the stack pointer points at the frame pointer. The layout on the stack is: ... IP FP ... IP FP. So we need to make sure that both IP and FP are in the bounds. Fix the bound checks and get rid of the mix of numeric constants, u64 and unsigned long. Making all unsigned long allows us to use the same function for 32bit as well. Use READ_ONCE() when accessing the stack. This does not prevent a concurrent wakeup of the task and the stack changing, but at least it avoids TOCTOU. Also check task state at the end of the loop. Again that does not prevent concurrent changes, but it avoids walking for nothing. Add proper comments while at it. Reported-by: Dmitry Vyukov <[email protected]> Reported-by: Sasha Levin <[email protected]> Based-on-patch-from: Wolfram Gloger <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Borislav Petkov <[email protected]> Reviewed-by: Dmitry Vyukov <[email protected]> Cc: Andrey Ryabinin <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Andrey Konovalov <[email protected]> Cc: Kostya Serebryany <[email protected]> Cc: Alexander Potapenko <[email protected]> Cc: kasan-dev <[email protected]> Cc: Denys Vlasenko <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Wolfram Gloger <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Thomas Gleixner <[email protected]>

Commit 1a3d595 ("MIPS: Tidy up FPU context switching") removed FP context saving from the asm-written resume function in favour of reusing existing code to perform the same task. However it only removed the FP context saving code from the r4k_switch.S implementation of resume. Octeon uses its own implementation in octeon_switch.S, so remove FP context saving there too in order to prevent attempting to save context twice. That formerly led to an exception from the second save as follows because the FPU had already been disabled by the first save: do_cpu invoked from kernel context![openbmc#1]: CPU: 0 PID: 2 Comm: kthreadd Not tainted 4.3.0-rc2-dirty openbmc#2 task: 800000041f84a008 ti: 800000041f864000 task.ti: 800000041f864000 $ 0 : 0000000000000000 0000000010008ce1 0000000000100000 ffffffffbfffffff $ 4 : 800000041f84a008 800000041f84ac08 800000041f84c000 0000000000000004 $ 8 : 0000000000000001 0000000000000000 0000000000000000 0000000000000001 $12 : 0000000010008ce3 0000000000119c60 0000000000000036 800000041f864000 $16 : 800000041f84ac08 800000000792ce80 800000041f84a008 ffffffff81758b00 $20 : 0000000000000000 ffffffff8175ae50 0000000000000000 ffffffff8176c740 $24 : 0000000000000006 ffffffff81170300 $28 : 800000041f864000 800000041f867d90 0000000000000000 ffffffff815f3fa0 Hi : 0000000000fa8257 Lo : ffffffffe15cfc00 epc : ffffffff8112821c resume+0x9c/0x200 ra : ffffffff815f3fa0 __schedule+0x3f0/0x7d8 Status: 10008ce2 KX SX UX KERNEL EXL Cause : 1080002c (ExcCode 0b) PrId : 000d0601 (Cavium Octeon+) Modules linked in: Process kthreadd (pid: 2, threadinfo=800000041f864000, task=800000041f84a008, tls=0000000000000000) Stack : ffffffff81604218 ffffffff815f7e08 800000041f84a008 ffffffff811681b0 800000041f84a008 ffffffff817e9878 0000000000000000 ffffffff81770000 ffffffff81768340 ffffffff81161398 0000000000000001 0000000000000000 0000000000000000 ffffffff815f4424 0000000000000000 ffffffff81161d68 ffffffff81161be8 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 ffffffff8111e16c 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 ... Call Trace: [<ffffffff8112821c>] resume+0x9c/0x200 [<ffffffff815f3fa0>] __schedule+0x3f0/0x7d8 [<ffffffff815f4424>] schedule+0x34/0x98 [<ffffffff81161d68>] kthreadd+0x180/0x198 [<ffffffff8111e16c>] ret_from_kernel_thread+0x14/0x1c Tested using cavium_octeon_defconfig on an EdgeRouter Lite. Fixes: 1a3d595 ("MIPS: Tidy up FPU context switching") Reported-by: Aaro Koskinen <[email protected]> Signed-off-by: Paul Burton <[email protected]> Cc: [email protected] Cc: Aleksey Makarov <[email protected]> Cc: [email protected] Cc: Chandrakala Chavva <[email protected]> Cc: David Daney <[email protected]> Cc: Leonid Rosenboim <[email protected]> Patchwork: https://patchwork.linux-mips.org/patch/11166/ Signed-off-by: Ralf Baechle <[email protected]>

My colleague ran into a program stall on a x86_64 server, where n_tty_read() was waiting for data even if there was data in the buffer in the pty. kernel stack for the stuck process looks like below. #0 [ffff88303d107b58] __schedule at ffffffff815c4b20 openbmc#1 [ffff88303d107bd0] schedule at ffffffff815c513e openbmc#2 [ffff88303d107bf0] schedule_timeout at ffffffff815c7818 openbmc#3 [ffff88303d107ca0] wait_woken at ffffffff81096bd2 openbmc#4 [ffff88303d107ce0] n_tty_read at ffffffff8136fa23 openbmc#5 [ffff88303d107dd0] tty_read at ffffffff81368013 openbmc#6 [ffff88303d107e20] __vfs_read at ffffffff811a3704 openbmc#7 [ffff88303d107ec0] vfs_read at ffffffff811a3a57 openbmc#8 [ffff88303d107f00] sys_read at ffffffff811a4306 openbmc#9 [ffff88303d107f50] entry_SYSCALL_64_fastpath at ffffffff815c86d7 There seems to be two problems causing this issue. First, in drivers/tty/n_tty.c, __receive_buf() stores the data and updates ldata->commit_head using smp_store_release() and then checks the wait queue using waitqueue_active(). However, since there is no memory barrier, __receive_buf() could return without calling wake_up_interactive_poll(), and at the same time, n_tty_read() could start to wait in wait_woken() as in the following chart. __receive_buf() n_tty_read() ------------------------------------------------------------------------ if (waitqueue_active(&tty->read_wait)) /* Memory operations issued after the RELEASE may be completed before the RELEASE operation has completed */ add_wait_queue(&tty->read_wait, &wait); ... if (!input_available_p(tty, 0)) { smp_store_release(&ldata->commit_head, ldata->read_head); ... timeout = wait_woken(&wait, TASK_INTERRUPTIBLE, timeout); ------------------------------------------------------------------------ The second problem is that n_tty_read() also lacks a memory barrier call and could also cause __receive_buf() to return without calling wake_up_interactive_poll(), and n_tty_read() to wait in wait_woken() as in the chart below. __receive_buf() n_tty_read() ------------------------------------------------------------------------ spin_lock_irqsave(&q->lock, flags); /* from add_wait_queue() */ ... if (!input_available_p(tty, 0)) { /* Memory operations issued after the RELEASE may be completed before the RELEASE operation has completed */ smp_store_release(&ldata->commit_head, ldata->read_head); if (waitqueue_active(&tty->read_wait)) __add_wait_queue(q, wait); spin_unlock_irqrestore(&q->lock,flags); /* from add_wait_queue() */ ... timeout = wait_woken(&wait, TASK_INTERRUPTIBLE, timeout); ------------------------------------------------------------------------ There are also other places in drivers/tty/n_tty.c which have similar calls to waitqueue_active(), so instead of adding many memory barrier calls, this patch simply removes the call to waitqueue_active(), leaving just wake_up*() behind. This fixes both problems because, even though the memory access before or after the spinlocks in both wake_up*() and add_wait_queue() can sneak into the critical section, it cannot go past it and the critical section assures that they will be serialized (please see "INTER-CPU ACQUIRING BARRIER EFFECTS" in Documentation/memory-barriers.txt for a better explanation). Moreover, the resulting code is much simpler. Latency measurement using a ping-pong test over a pty doesn't show any visible performance drop. Signed-off-by: Kosuke Tatsukawa <[email protected]> Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

When running kprobe test on arm64 rt kernel, it reports the below warning: root@qemu7:~# modprobe kprobe_example BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:917 in_atomic(): 0, irqs_disabled(): 128, pid: 484, name: modprobe CPU: 0 PID: 484 Comm: modprobe Not tainted 4.1.6-rt5 openbmc#2 Hardware name: linux,dummy-virt (DT) Call trace: [<ffffffc0000891b8>] dump_backtrace+0x0/0x128 [<ffffffc000089300>] show_stack+0x20/0x30 [<ffffffc00061dae8>] dump_stack+0x1c/0x28 [<ffffffc0000bbad0>] ___might_sleep+0x120/0x198 [<ffffffc0006223e8>] rt_spin_lock+0x28/0x40 [<ffffffc000622b30>] __aarch64_insn_write+0x28/0x78 [<ffffffc000622e48>] aarch64_insn_patch_text_nosync+0x18/0x48 [<ffffffc000622ee8>] aarch64_insn_patch_text_cb+0x70/0xa0 [<ffffffc000622f40>] aarch64_insn_patch_text_sync+0x28/0x48 [<ffffffc0006236e0>] arch_arm_kprobe+0x38/0x48 [<ffffffc00010e6f4>] arm_kprobe+0x34/0x50 [<ffffffc000110374>] register_kprobe+0x4cc/0x5b8 [<ffffffbffc002038>] kprobe_init+0x38/0x7c [kprobe_example] [<ffffffc000084240>] do_one_initcall+0x90/0x1b0 [<ffffffc00061c498>] do_init_module+0x6c/0x1cc [<ffffffc0000fd0c0>] load_module+0x17f8/0x1db0 [<ffffffc0000fd8cc>] SyS_finit_module+0xb4/0xc8 Convert patch_lock to raw loc kto avoid this issue. Although the problem is found on rt kernel, the fix should be applicable to mainline kernel too. Acked-by: Steven Rostedt <[email protected]> Signed-off-by: Yang Shi <[email protected]> Signed-off-by: Will Deacon <[email protected]>

When freqdomain_cpus attribute is read from an offlined cpu, it will cause crash. This change prevents calling cpufreq_show_cpus when policy driver_data is NULL. Crash info: [ 170.814949] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 [ 170.814990] IP: [<ffffffff813b2490>] _find_next_bit.part.0+0x10/0x70 [ 170.815021] PGD 227d30067 PUD 229e56067 PMD 0 [ 170.815043] Oops: 0000 [openbmc#2] SMP [ 170.816022] CPU: 3 PID: 3121 Comm: cat Tainted: G D OE 4.3.0-rc3+ openbmc#33 ... ... [ 170.816657] Call Trace: [ 170.816672] [<ffffffff813b2505>] ? find_next_bit+0x15/0x20 [ 170.816696] [<ffffffff8160e47c>] cpufreq_show_cpus+0x5c/0xd0 [ 170.816722] [<ffffffffa031a409>] show_freqdomain_cpus+0x19/0x20 [acpi_cpufreq] [ 170.816749] [<ffffffff8160e65b>] show+0x3b/0x60 [ 170.816769] [<ffffffff8129b31c>] sysfs_kf_seq_show+0xbc/0x130 [ 170.816793] [<ffffffff81299be3>] kernfs_seq_show+0x23/0x30 [ 170.816816] [<ffffffff81240f2c>] seq_read+0xec/0x390 [ 170.816837] [<ffffffff8129a64a>] kernfs_fop_read+0x10a/0x160 [ 170.816861] [<ffffffff8121d9b7>] __vfs_read+0x37/0x100 [ 170.816883] [<ffffffff813217c0>] ? security_file_permission+0xa0/0xc0 [ 170.816909] [<ffffffff8121e2e3>] vfs_read+0x83/0x130 [ 170.816930] [<ffffffff8121f035>] SyS_read+0x55/0xc0 ... ... [ 170.817185] ---[ end trace bc6eadf82b2b965a ]--- Signed-off-by: Srinivas Pandruvada <[email protected]> Acked-by: Viresh Kumar <[email protected]> Cc: 4.2+ <[email protected]> # 4.2+ Signed-off-by: Rafael J. Wysocki <[email protected]>

…_BH() in preemptible context. [ Upstream commit 44f49dd ] Fixes the following kernel BUG : BUG: using __this_cpu_add() in preemptible [00000000] code: bash/2758 caller is __this_cpu_preempt_check+0x13/0x15 CPU: 0 PID: 2758 Comm: bash Tainted: P O 3.18.19 openbmc#2 ffffffff8170eaca ffff880110d1b788 ffffffff81482b2a 0000000000000000 0000000000000000 ffff880110d1b7b8 ffffffff812010ae ffff880007cab800 ffff88001a060800 ffff88013a899108 ffff880108b84240 ffff880110d1b7c8 Call Trace: [<ffffffff81482b2a>] dump_stack+0x52/0x80 [<ffffffff812010ae>] check_preemption_disabled+0xce/0xe1 [<ffffffff812010d4>] __this_cpu_preempt_check+0x13/0x15 [<ffffffff81419d60>] ipmr_queue_xmit+0x647/0x70c [<ffffffff8141a154>] ip_mr_forward+0x32f/0x34e [<ffffffff8141af76>] ip_mroute_setsockopt+0xe03/0x108c [<ffffffff810553fc>] ? get_parent_ip+0x11/0x42 [<ffffffff810e6974>] ? pollwake+0x4d/0x51 [<ffffffff81058ac0>] ? default_wake_function+0x0/0xf [<ffffffff810553fc>] ? get_parent_ip+0x11/0x42 [<ffffffff810613d9>] ? __wake_up_common+0x45/0x77 [<ffffffff81486ea9>] ? _raw_spin_unlock_irqrestore+0x1d/0x32 [<ffffffff810618bc>] ? __wake_up_sync_key+0x4a/0x53 [<ffffffff8139a519>] ? sock_def_readable+0x71/0x75 [<ffffffff813dd226>] do_ip_setsockopt+0x9d/0xb55 [<ffffffff81429818>] ? unix_seqpacket_sendmsg+0x3f/0x41 [<ffffffff813963fe>] ? sock_sendmsg+0x6d/0x86 [<ffffffff813959d4>] ? sockfd_lookup_light+0x12/0x5d [<ffffffff8139650a>] ? SyS_sendto+0xf3/0x11b [<ffffffff810d5738>] ? new_sync_read+0x82/0xaa [<ffffffff813ddd19>] compat_ip_setsockopt+0x3b/0x99 [<ffffffff813fb24a>] compat_raw_setsockopt+0x11/0x32 [<ffffffff81399052>] compat_sock_common_setsockopt+0x18/0x1f [<ffffffff813c4d05>] compat_SyS_setsockopt+0x1a9/0x1cf [<ffffffff813c4149>] compat_SyS_socketcall+0x180/0x1e3 [<ffffffff81488ea1>] cstar_dispatch+0x7/0x1e Signed-off-by: Ani Sinha <[email protected]> Acked-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 169410e ] These three bpf_map_{lookup,update,delete}_elem() helpers are also available for sleepable bpf program, so add the corresponding lock assertion for sleepable bpf program, otherwise the following warning will be reported when a sleepable bpf program manipulates bpf map under interpreter mode (aka bpf_jit_enable=0): WARNING: CPU: 3 PID: 4985 at kernel/bpf/helpers.c:40 ...... CPU: 3 PID: 4985 Comm: test_progs Not tainted 6.6.0+ openbmc#2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) ...... RIP: 0010:bpf_map_lookup_elem+0x54/0x60 ...... Call Trace: <TASK> ? __warn+0xa5/0x240 ? bpf_map_lookup_elem+0x54/0x60 ? report_bug+0x1ba/0x1f0 ? handle_bug+0x40/0x80 ? exc_invalid_op+0x18/0x50 ? asm_exc_invalid_op+0x1b/0x20 ? __pfx_bpf_map_lookup_elem+0x10/0x10 ? rcu_lockdep_current_cpu_online+0x65/0xb0 ? rcu_is_watching+0x23/0x50 ? bpf_map_lookup_elem+0x54/0x60 ? __pfx_bpf_map_lookup_elem+0x10/0x10 ___bpf_prog_run+0x513/0x3b70 __bpf_prog_run32+0x9d/0xd0 ? __bpf_prog_enter_sleepable_recur+0xad/0x120 ? __bpf_prog_enter_sleepable_recur+0x3e/0x120 bpf_trampoline_6442580665+0x4d/0x1000 __x64_sys_getpgid+0x5/0x30 ? do_syscall_64+0x36/0xb0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 </TASK> Signed-off-by: Hou Tao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit b313a8c ] Lockdep reported a warning in Linux version 6.6: [ 414.344659] ================================ [ 414.345155] WARNING: inconsistent lock state [ 414.345658] 6.6.0-07439-gba2303cacfda #6 Not tainted [ 414.346221] -------------------------------- [ 414.346712] inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. [ 414.347545] kworker/u10:3/1152 [HC0[0]:SC0[0]:HE0:SE1] takes: [ 414.349245] ffff88810edd1098 (&sbq->ws[i].wait){+.?.}-{2:2}, at: blk_mq_dispatch_rq_list+0x131c/0x1ee0 [ 414.351204] {IN-SOFTIRQ-W} state was registered at: [ 414.351751] lock_acquire+0x18d/0x460 [ 414.352218] _raw_spin_lock_irqsave+0x39/0x60 [ 414.352769] __wake_up_common_lock+0x22/0x60 [ 414.353289] sbitmap_queue_wake_up+0x375/0x4f0 [ 414.353829] sbitmap_queue_clear+0xdd/0x270 [ 414.354338] blk_mq_put_tag+0xdf/0x170 [ 414.354807] __blk_mq_free_request+0x381/0x4d0 [ 414.355335] blk_mq_free_request+0x28b/0x3e0 [ 414.355847] __blk_mq_end_request+0x242/0xc30 [ 414.356367] scsi_end_request+0x2c1/0x830 [ 414.345155] WARNING: inconsistent lock state [ 414.345658] 6.6.0-07439-gba2303cacfda #6 Not tainted [ 414.346221] -------------------------------- [ 414.346712] inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. [ 414.347545] kworker/u10:3/1152 [HC0[0]:SC0[0]:HE0:SE1] takes: [ 414.349245] ffff88810edd1098 (&sbq->ws[i].wait){+.?.}-{2:2}, at: blk_mq_dispatch_rq_list+0x131c/0x1ee0 [ 414.351204] {IN-SOFTIRQ-W} state was registered at: [ 414.351751] lock_acquire+0x18d/0x460 [ 414.352218] _raw_spin_lock_irqsave+0x39/0x60 [ 414.352769] __wake_up_common_lock+0x22/0x60 [ 414.353289] sbitmap_queue_wake_up+0x375/0x4f0 [ 414.353829] sbitmap_queue_clear+0xdd/0x270 [ 414.354338] blk_mq_put_tag+0xdf/0x170 [ 414.354807] __blk_mq_free_request+0x381/0x4d0 [ 414.355335] blk_mq_free_request+0x28b/0x3e0 [ 414.355847] __blk_mq_end_request+0x242/0xc30 [ 414.356367] scsi_end_request+0x2c1/0x830 [ 414.356863] scsi_io_completion+0x177/0x1610 [ 414.357379] scsi_complete+0x12f/0x260 [ 414.357856] blk_complete_reqs+0xba/0xf0 [ 414.358338] __do_softirq+0x1b0/0x7a2 [ 414.358796] irq_exit_rcu+0x14b/0x1a0 [ 414.359262] sysvec_call_function_single+0xaf/0xc0 [ 414.359828] asm_sysvec_call_function_single+0x1a/0x20 [ 414.360426] default_idle+0x1e/0x30 [ 414.360873] default_idle_call+0x9b/0x1f0 [ 414.361390] do_idle+0x2d2/0x3e0 [ 414.361819] cpu_startup_entry+0x55/0x60 [ 414.362314] start_secondary+0x235/0x2b0 [ 414.362809] secondary_startup_64_no_verify+0x18f/0x19b [ 414.363413] irq event stamp: 428794 [ 414.363825] hardirqs last enabled at (428793): [<ffffffff816bfd1c>] ktime_get+0x1dc/0x200 [ 414.364694] hardirqs last disabled at (428794): [<ffffffff85470177>] _raw_spin_lock_irq+0x47/0x50 [ 414.365629] softirqs last enabled at (428444): [<ffffffff85474780>] __do_softirq+0x540/0x7a2 [ 414.366522] softirqs last disabled at (428419): [<ffffffff813f65ab>] irq_exit_rcu+0x14b/0x1a0 [ 414.367425] other info that might help us debug this: [ 414.368194] Possible unsafe locking scenario: [ 414.368900] CPU0 [ 414.369225] ---- [ 414.369548] lock(&sbq->ws[i].wait); [ 414.370000] <Interrupt> [ 414.370342] lock(&sbq->ws[i].wait); [ 414.370802] *** DEADLOCK *** [ 414.371569] 5 locks held by kworker/u10:3/1152: [ 414.372088] #0: ffff88810130e938 ((wq_completion)writeback){+.+.}-{0:0}, at: process_scheduled_works+0x357/0x13f0 [ 414.373180] #1: ffff88810201fdb8 ((work_completion)(&(&wb->dwork)->work)){+.+.}-{0:0}, at: process_scheduled_works+0x3a3/0x13f0 [ 414.374384] #2: ffffffff86ffbdc0 (rcu_read_lock){....}-{1:2}, at: blk_mq_run_hw_queue+0x637/0xa00 [ 414.375342] #3: ffff88810edd1098 (&sbq->ws[i].wait){+.?.}-{2:2}, at: blk_mq_dispatch_rq_list+0x131c/0x1ee0 [ 414.376377] #4: ffff888106205a08 (&hctx->dispatch_wait_lock){+.-.}-{2:2}, at: blk_mq_dispatch_rq_list+0x1337/0x1ee0 [ 414.378607] stack backtrace: [ 414.379177] CPU: 0 PID: 1152 Comm: kworker/u10:3 Not tainted 6.6.0-07439-gba2303cacfda #6 [ 414.380032] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 414.381177] Workqueue: writeback wb_workfn (flush-253:0) [ 414.381805] Call Trace: [ 414.382136] <TASK> [ 414.382429] dump_stack_lvl+0x91/0xf0 [ 414.382884] mark_lock_irq+0xb3b/0x1260 [ 414.383367] ? __pfx_mark_lock_irq+0x10/0x10 [ 414.383889] ? stack_trace_save+0x8e/0xc0 [ 414.384373] ? __pfx_stack_trace_save+0x10/0x10 [ 414.384903] ? graph_lock+0xcf/0x410 [ 414.385350] ? save_trace+0x3d/0xc70 [ 414.385808] mark_lock.part.20+0x56d/0xa90 [ 414.386317] mark_held_locks+0xb0/0x110 [ 414.386791] ? __pfx_do_raw_spin_lock+0x10/0x10 [ 414.387320] lockdep_hardirqs_on_prepare+0x297/0x3f0 [ 414.387901] ? _raw_spin_unlock_irq+0x28/0x50 [ 414.388422] trace_hardirqs_on+0x58/0x100 [ 414.388917] _raw_spin_unlock_irq+0x28/0x50 [ 414.389422] __blk_mq_tag_busy+0x1d6/0x2a0 [ 414.389920] __blk_mq_get_driver_tag+0x761/0x9f0 [ 414.390899] blk_mq_dispatch_rq_list+0x1780/0x1ee0 [ 414.391473] ? __pfx_blk_mq_dispatch_rq_list+0x10/0x10 [ 414.392070] ? sbitmap_get+0x2b8/0x450 [ 414.392533] ? __blk_mq_get_driver_tag+0x210/0x9f0 [ 414.393095] __blk_mq_sched_dispatch_requests+0xd99/0x1690 [ 414.393730] ? elv_attempt_insert_merge+0x1b1/0x420 [ 414.394302] ? __pfx___blk_mq_sched_dispatch_requests+0x10/0x10 [ 414.394970] ? lock_acquire+0x18d/0x460 [ 414.395456] ? blk_mq_run_hw_queue+0x637/0xa00 [ 414.395986] ? __pfx_lock_acquire+0x10/0x10 [ 414.396499] blk_mq_sched_dispatch_requests+0x109/0x190 [ 414.397100] blk_mq_run_hw_queue+0x66e/0xa00 [ 414.397616] blk_mq_flush_plug_list.part.17+0x614/0x2030 [ 414.398244] ? __pfx_blk_mq_flush_plug_list.part.17+0x10/0x10 [ 414.398897] ? writeback_sb_inodes+0x241/0xcc0 [ 414.399429] blk_mq_flush_plug_list+0x65/0x80 [ 414.399957] __blk_flush_plug+0x2f1/0x530 [ 414.400458] ? __pfx___blk_flush_plug+0x10/0x10 [ 414.400999] blk_finish_plug+0x59/0xa0 [ 414.401467] wb_writeback+0x7cc/0x920 [ 414.401935] ? __pfx_wb_writeback+0x10/0x10 [ 414.402442] ? mark_held_locks+0xb0/0x110 [ 414.402931] ? __pfx_do_raw_spin_lock+0x10/0x10 [ 414.403462] ? lockdep_hardirqs_on_prepare+0x297/0x3f0 [ 414.404062] wb_workfn+0x2b3/0xcf0 [ 414.404500] ? __pfx_wb_workfn+0x10/0x10 [ 414.404989] process_scheduled_works+0x432/0x13f0 [ 414.405546] ? __pfx_process_scheduled_works+0x10/0x10 [ 414.406139] ? do_raw_spin_lock+0x101/0x2a0 [ 414.406641] ? assign_work+0x19b/0x240 [ 414.407106] ? lock_is_held_type+0x9d/0x110 [ 414.407604] worker_thread+0x6f2/0x1160 [ 414.408075] ? __kthread_parkme+0x62/0x210 [ 414.408572] ? lockdep_hardirqs_on_prepare+0x297/0x3f0 [ 414.409168] ? __kthread_parkme+0x13c/0x210 [ 414.409678] ? __pfx_worker_thread+0x10/0x10 [ 414.410191] kthread+0x33c/0x440 [ 414.410602] ? __pfx_kthread+0x10/0x10 [ 414.411068] ret_from_fork+0x4d/0x80 [ 414.411526] ? __pfx_kthread+0x10/0x10 [ 414.411993] ret_from_fork_asm+0x1b/0x30 [ 414.412489] </TASK> When interrupt is turned on while a lock holding by spin_lock_irq it throws a warning because of potential deadlock. blk_mq_prep_dispatch_rq blk_mq_get_driver_tag __blk_mq_get_driver_tag __blk_mq_alloc_driver_tag blk_mq_tag_busy -> tag is already busy // failed to get driver tag blk_mq_mark_tag_wait spin_lock_irq(&wq->lock) -> lock A (&sbq->ws[i].wait) __add_wait_queue(wq, wait) -> wait queue active blk_mq_get_driver_tag __blk_mq_tag_busy -> 1) tag must be idle, which means there can't be inflight IO spin_lock_irq(&tags->lock) -> lock B (hctx->tags) spin_unlock_irq(&tags->lock) -> unlock B, turn on interrupt accidentally -> 2) context must be preempt by IO interrupt to trigger deadlock. As shown above, the deadlock is not possible in theory, but the warning still need to be fixed. Fix it by using spin_lock_irqsave to get lockB instead of spin_lock_irq. Fixes: 4f1731d ("blk-mq: fix potential io hang by wrong 'wake_batch'") Signed-off-by: Li Lingfeng <[email protected]> Reviewed-by: Ming Lei <[email protected]> Reviewed-by: Yu Kuai <[email protected]> Reviewed-by: Bart Van Assche <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit bd44ca3 ] Currently the dma debugging code can end up indirectly calling printk under the radix_lock. This happens when a radix tree node allocation fails. This is a problem because the printk code, when used together with netconsole, can end up inside the dma debugging code while trying to transmit a message over netcons. This creates the possibility of either a circular deadlock on the same CPU, with that CPU trying to grab the radix_lock twice, or an ABBA deadlock between different CPUs, where one CPU grabs the console lock first and then waits for the radix_lock, while the other CPU is holding the radix_lock and is waiting for the console lock. The trace captured by lockdep is of the ABBA variant. -> #2 (&dma_entry_hash[i].lock){-.-.}-{2:2}: _raw_spin_lock_irqsave+0x5a/0x90 debug_dma_map_page+0x79/0x180 dma_map_page_attrs+0x1d2/0x2f0 bnxt_start_xmit+0x8c6/0x1540 netpoll_start_xmit+0x13f/0x180 netpoll_send_skb+0x20d/0x320 netpoll_send_udp+0x453/0x4a0 write_ext_msg+0x1b9/0x460 console_flush_all+0x2ff/0x5a0 console_unlock+0x55/0x180 vprintk_emit+0x2e3/0x3c0 devkmsg_emit+0x5a/0x80 devkmsg_write+0xfd/0x180 do_iter_readv_writev+0x164/0x1b0 vfs_writev+0xf9/0x2b0 do_writev+0x6d/0x110 do_syscall_64+0x80/0x150 entry_SYSCALL_64_after_hwframe+0x4b/0x53 -> #0 (console_owner){-.-.}-{0:0}: __lock_acquire+0x15d1/0x31a0 lock_acquire+0xe8/0x290 console_flush_all+0x2ea/0x5a0 console_unlock+0x55/0x180 vprintk_emit+0x2e3/0x3c0 _printk+0x59/0x80 warn_alloc+0x122/0x1b0 __alloc_pages_slowpath+0x1101/0x1120 __alloc_pages+0x1eb/0x2c0 alloc_slab_page+0x5f/0x150 new_slab+0x2dc/0x4e0 ___slab_alloc+0xdcb/0x1390 kmem_cache_alloc+0x23d/0x360 radix_tree_node_alloc+0x3c/0xf0 radix_tree_insert+0xf5/0x230 add_dma_entry+0xe9/0x360 dma_map_page_attrs+0x1d2/0x2f0 __bnxt_alloc_rx_frag+0x147/0x180 bnxt_alloc_rx_data+0x79/0x160 bnxt_rx_skb+0x29/0xc0 bnxt_rx_pkt+0xe22/0x1570 __bnxt_poll_work+0x101/0x390 bnxt_poll+0x7e/0x320 __napi_poll+0x29/0x160 net_rx_action+0x1e0/0x3e0 handle_softirqs+0x190/0x510 run_ksoftirqd+0x4e/0x90 smpboot_thread_fn+0x1a8/0x270 kthread+0x102/0x120 ret_from_fork+0x2f/0x40 ret_from_fork_asm+0x11/0x20 This bug is more likely than it seems, because when one CPU has run out of memory, chances are the other has too. The good news is, this bug is hidden behind the CONFIG_DMA_API_DEBUG, so not many users are likely to trigger it. Signed-off-by: Rik van Riel <[email protected]> Reported-by: Konstantin Ovsepian <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 56f4526 ] This timer HW supports 8, 16 and 32-bit timer widths. This driver currently uses a u32 to store the max possible value of the timer. However, statements perform addition of 2 in xilinx_pwm_apply() when calculating the period_cycles and duty_cycles values. Since priv->max is a u32, this will result in an overflow to 1 which will not only be incorrect but fail on range comparison. This results in making it impossible to set the PWM in this timer mode. There are two obvious solutions to the current problem: 1. Cast each instance where overflow occurs to u64. 2. Change priv->max from a u32 to a u64. Solution #1 requires more code modifications, and leaves opportunity to introduce similar overflows if other math statements are added in the future. These may also go undetected if running in non 32-bit timer modes. Solution #2 is the much smaller and cleaner approach and thus the chosen method in this patch. This was tested on a Zynq UltraScale+ with multiple instances of the PWM IP. Signed-off-by: Ken Sloat <[email protected]> Reviewed-by: Michal Simek <[email protected]> Reviewed-by: Sean Anderson <[email protected]> Link: https://lore.kernel.org/r/SJ0P222MB0107490C5371B848EF04351CA1E19@SJ0P222MB0107.NAMP222.PROD.OUTLOOK.COM Signed-off-by: Michal Simek <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

@CFILE

commit f9c169b upstream. If smb2_compound_op() is called with a valid @CFILE and returned -EINVAL, we need to call cifs_get_writable_path() before retrying it as the reference of @CFILE was already dropped by previous call. This fixes the following KASAN splat when running fstests generic/013 against Windows Server 2022: CIFS: Attempting to mount //w22-fs0/scratch run fstests generic/013 at 2024-09-02 19:48:59 ================================================================== BUG: KASAN: slab-use-after-free in detach_if_pending+0xab/0x200 Write of size 8 at addr ffff88811f1a3730 by task kworker/3:2/176 CPU: 3 UID: 0 PID: 176 Comm: kworker/3:2 Not tainted 6.11.0-rc6 #2 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014 Workqueue: cifsoplockd cifs_oplock_break [cifs] Call Trace: <TASK> dump_stack_lvl+0x5d/0x80 ? detach_if_pending+0xab/0x200 print_report+0x156/0x4d9 ? detach_if_pending+0xab/0x200 ? __virt_addr_valid+0x145/0x300 ? __phys_addr+0x46/0x90 ? detach_if_pending+0xab/0x200 kasan_report+0xda/0x110 ? detach_if_pending+0xab/0x200 detach_if_pending+0xab/0x200 timer_delete+0x96/0xe0 ? __pfx_timer_delete+0x10/0x10 ? rcu_is_watching+0x20/0x50 try_to_grab_pending+0x46/0x3b0 __cancel_work+0x89/0x1b0 ? __pfx___cancel_work+0x10/0x10 ? kasan_save_track+0x14/0x30 cifs_close_deferred_file+0x110/0x2c0 [cifs] ? __pfx_cifs_close_deferred_file+0x10/0x10 [cifs] ? __pfx_down_read+0x10/0x10 cifs_oplock_break+0x4c1/0xa50 [cifs] ? __pfx_cifs_oplock_break+0x10/0x10 [cifs] ? lock_is_held_type+0x85/0xf0 ? mark_held_locks+0x1a/0x90 process_one_work+0x4c6/0x9f0 ? find_held_lock+0x8a/0xa0 ? __pfx_process_one_work+0x10/0x10 ? lock_acquired+0x220/0x550 ? __list_add_valid_or_report+0x37/0x100 worker_thread+0x2e4/0x570 ? __kthread_parkme+0xd1/0xf0 ? __pfx_worker_thread+0x10/0x10 kthread+0x17f/0x1c0 ? kthread+0xda/0x1c0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x60 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 1118: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 cifs_new_fileinfo+0xc8/0x9d0 [cifs] cifs_atomic_open+0x467/0x770 [cifs] lookup_open.isra.0+0x665/0x8b0 path_openat+0x4c3/0x1380 do_filp_open+0x167/0x270 do_sys_openat2+0x129/0x160 __x64_sys_creat+0xad/0xe0 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 83: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x70 poison_slab_object+0xe9/0x160 __kasan_slab_free+0x32/0x50 kfree+0xf2/0x300 process_one_work+0x4c6/0x9f0 worker_thread+0x2e4/0x570 kthread+0x17f/0x1c0 ret_from_fork+0x31/0x60 ret_from_fork_asm+0x1a/0x30 Last potentially related work creation: kasan_save_stack+0x30/0x50 __kasan_record_aux_stack+0xad/0xc0 insert_work+0x29/0xe0 __queue_work+0x5ea/0x760 queue_work_on+0x6d/0x90 _cifsFileInfo_put+0x3f6/0x770 [cifs] smb2_compound_op+0x911/0x3940 [cifs] smb2_set_path_size+0x228/0x270 [cifs] cifs_set_file_size+0x197/0x460 [cifs] cifs_setattr+0xd9c/0x14b0 [cifs] notify_change+0x4e3/0x740 do_truncate+0xfa/0x180 vfs_truncate+0x195/0x200 __x64_sys_truncate+0x109/0x150 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: 71f15c9 ("smb: client: retry compound request without reusing lease") Cc: [email protected] Signed-off-by: Paulo Alcantara (Red Hat) <[email protected]> Cc: David Howells <[email protected]> Signed-off-by: Steve French <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit d260327 upstream. Chi Zhiling reported: We found a null pointer accessing in tracefs[1], the reason is that the variable 'ei_child' is set to LIST_POISON1, that means the list was removed in eventfs_remove_rec. so when access the ei_child->is_freed, the panic triggered. by the way, the following script can reproduce this panic loop1 (){ while true do echo "p:kp submit_bio" > /sys/kernel/debug/tracing/kprobe_events echo "" > /sys/kernel/debug/tracing/kprobe_events done } loop2 (){ while true do tree /sys/kernel/debug/tracing/events/kprobes/ done } loop1 & loop2 [1]: [ 1147.959632][T17331] Unable to handle kernel paging request at virtual address dead000000000150 [ 1147.968239][T17331] Mem abort info: [ 1147.971739][T17331] ESR = 0x0000000096000004 [ 1147.976172][T17331] EC = 0x25: DABT (current EL), IL = 32 bits [ 1147.982171][T17331] SET = 0, FnV = 0 [ 1147.985906][T17331] EA = 0, S1PTW = 0 [ 1147.989734][T17331] FSC = 0x04: level 0 translation fault [ 1147.995292][T17331] Data abort info: [ 1147.998858][T17331] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 1148.005023][T17331] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 1148.010759][T17331] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 1148.016752][T17331] [dead000000000150] address between user and kernel address ranges [ 1148.024571][T17331] Internal error: Oops: 0000000096000004 [#1] SMP [ 1148.030825][T17331] Modules linked in: team_mode_loadbalance team nlmon act_gact cls_flower sch_ingress bonding tls macvlan dummy ib_core bridge stp llc veth amdgpu amdxcp mfd_core gpu_sched drm_exec drm_buddy radeon crct10dif_ce video drm_suballoc_helper ghash_ce drm_ttm_helper sha2_ce ttm sha256_arm64 i2c_algo_bit sha1_ce sbsa_gwdt cp210x drm_display_helper cec sr_mod cdrom drm_kms_helper binfmt_misc sg loop fuse drm dm_mod nfnetlink ip_tables autofs4 [last unloaded: tls] [ 1148.072808][T17331] CPU: 3 PID: 17331 Comm: ls Tainted: G W ------- ---- 6.6.43 #2 [ 1148.081751][T17331] Source Version: 21b3b386e948bedd29369af66f3e98ab01b1c650 [ 1148.088783][T17331] Hardware name: Greatwall GW-001M1A-FTF/GW-001M1A-FTF, BIOS KunLun BIOS V4.0 07/16/2020 [ 1148.098419][T17331] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 1148.106060][T17331] pc : eventfs_iterate+0x2c0/0x398 [ 1148.111017][T17331] lr : eventfs_iterate+0x2fc/0x398 [ 1148.115969][T17331] sp : ffff80008d56bbd0 [ 1148.119964][T17331] x29: ffff80008d56bbf0 x28: ffff001ff5be2600 x27: 0000000000000000 [ 1148.127781][T17331] x26: ffff001ff52ca4e0 x25: 0000000000009977 x24: dead000000000100 [ 1148.135598][T17331] x23: 0000000000000000 x22: 000000000000000b x21: ffff800082645f10 [ 1148.143415][T17331] x20: ffff001fddf87c70 x19: ffff80008d56bc90 x18: 0000000000000000 [ 1148.151231][T17331] x17: 0000000000000000 x16: 0000000000000000 x15: ffff001ff52ca4e0 [ 1148.159048][T17331] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 1148.166864][T17331] x11: 0000000000000000 x10: 0000000000000000 x9 : ffff8000804391d0 [ 1148.174680][T17331] x8 : 0000000180000000 x7 : 0000000000000018 x6 : 0000aaab04b92862 [ 1148.182498][T17331] x5 : 0000aaab04b92862 x4 : 0000000080000000 x3 : 0000000000000068 [ 1148.190314][T17331] x2 : 000000000000000f x1 : 0000000000007ea8 x0 : 0000000000000001 [ 1148.198131][T17331] Call trace: [ 1148.201259][T17331] eventfs_iterate+0x2c0/0x398 [ 1148.205864][T17331] iterate_dir+0x98/0x188 [ 1148.210036][T17331] __arm64_sys_getdents64+0x78/0x160 [ 1148.215161][T17331] invoke_syscall+0x78/0x108 [ 1148.219593][T17331] el0_svc_common.constprop.0+0x48/0xf0 [ 1148.224977][T17331] do_el0_svc+0x24/0x38 [ 1148.228974][T17331] el0_svc+0x40/0x168 [ 1148.232798][T17331] el0t_64_sync_handler+0x120/0x130 [ 1148.237836][T17331] el0t_64_sync+0x1a4/0x1a8 [ 1148.242182][T17331] Code: 54ffff6c f9400676 910006d6 f900067 (b9405300) [ 1148.248955][T17331] ---[ end trace 0000000000000000 ]--- The issue is that list_del() is used on an SRCU protected list variable before the synchronization occurs. This can poison the list pointers while there is a reader iterating the list. This is simply fixed by using list_del_rcu() that is specifically made for this purpose. Link: https://lore.kernel.org/linux-trace-kernel/[email protected]/ Cc: [email protected] Cc: Masami Hiramatsu <[email protected]> Cc: Mathieu Desnoyers <[email protected]> Link: https://lore.kernel.org/[email protected] Fixes: 43aa6f9 ("eventfs: Get rid of dentry pointers without refcounts") Reported-by: Chi Zhiling <[email protected]> Tested-by: Chi Zhiling <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit c68bbf5 ] This adds a check before freeing the rx->skb in flush and close functions to handle the kernel crash seen while removing driver after FW download fails or before FW download completes. dmesg log: [ 54.634586] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000080 [ 54.643398] Mem abort info: [ 54.646204] ESR = 0x0000000096000004 [ 54.649964] EC = 0x25: DABT (current EL), IL = 32 bits [ 54.655286] SET = 0, FnV = 0 [ 54.658348] EA = 0, S1PTW = 0 [ 54.661498] FSC = 0x04: level 0 translation fault [ 54.666391] Data abort info: [ 54.669273] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 54.674768] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 54.674771] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 54.674775] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000048860000 [ 54.674780] [0000000000000080] pgd=0000000000000000, p4d=0000000000000000 [ 54.703880] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 54.710152] Modules linked in: btnxpuart(-) overlay fsl_jr_uio caam_jr caamkeyblob_desc caamhash_desc caamalg_desc crypto_engine authenc libdes crct10dif_ce polyval_ce polyval_generic snd_soc_imx_spdif snd_soc_imx_card snd_soc_ak5558 snd_soc_ak4458 caam secvio error snd_soc_fsl_micfil snd_soc_fsl_spdif snd_soc_fsl_sai snd_soc_fsl_utils imx_pcm_dma gpio_ir_recv rc_core sch_fq_codel fuse [ 54.744357] CPU: 3 PID: 72 Comm: kworker/u9:0 Not tainted 6.6.3-otbr-g128004619037 #2 [ 54.744364] Hardware name: FSL i.MX8MM EVK board (DT) [ 54.744368] Workqueue: hci0 hci_power_on [ 54.757244] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 54.757249] pc : kfree_skb_reason+0x18/0xb0 [ 54.772299] lr : btnxpuart_flush+0x40/0x58 [btnxpuart] [ 54.782921] sp : ffff8000805ebca0 [ 54.782923] x29: ffff8000805ebca0 x28: ffffa5c6cf1869c0 x27: ffffa5c6cf186000 [ 54.782931] x26: ffff377b84852400 x25: ffff377b848523c0 x24: ffff377b845e7230 [ 54.782938] x23: ffffa5c6ce8dbe08 x22: ffffa5c6ceb65410 x21: 00000000ffffff92 [ 54.782945] x20: ffffa5c6ce8dbe98 x19: ffffffffffffffac x18: ffffffffffffffff [ 54.807651] x17: 0000000000000000 x16: ffffa5c6ce2824ec x15: ffff8001005eb857 [ 54.821917] x14: 0000000000000000 x13: ffffa5c6cf1a02e0 x12: 0000000000000642 [ 54.821924] x11: 0000000000000040 x10: ffffa5c6cf19d690 x9 : ffffa5c6cf19d688 [ 54.821931] x8 : ffff377b86000028 x7 : 0000000000000000 x6 : 0000000000000000 [ 54.821938] x5 : ffff377b86000000 x4 : 0000000000000000 x3 : 0000000000000000 [ 54.843331] x2 : 0000000000000000 x1 : 0000000000000002 x0 : ffffffffffffffac [ 54.857599] Call trace: [ 54.857601] kfree_skb_reason+0x18/0xb0 [ 54.863878] btnxpuart_flush+0x40/0x58 [btnxpuart] [ 54.863888] hci_dev_open_sync+0x3a8/0xa04 [ 54.872773] hci_power_on+0x54/0x2e4 [ 54.881832] process_one_work+0x138/0x260 [ 54.881842] worker_thread+0x32c/0x438 [ 54.881847] kthread+0x118/0x11c [ 54.881853] ret_from_fork+0x10/0x20 [ 54.896406] Code: a9be7bfd 910003fd f9000bf3 aa0003f3 (b940d400) [ 54.896410] ---[ end trace 0000000000000000 ]--- Signed-off-by: Neeraj Sanjay Kale <[email protected]> Tested-by: Guillaume Legoupil <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit c3a5e3e ] When using cachefiles, lockdep may emit something similar to the circular locking dependency notice below. The problem appears to stem from the following: (1) Cachefiles manipulates xattrs on the files in its cache when called from ->writepages(). (2) The setxattr() and removexattr() system call handlers get the name (and value) from userspace after taking the sb_writers lock, putting accesses of the vma->vm_lock and mm->mmap_lock inside of that. (3) The afs filesystem uses a per-inode lock to prevent multiple revalidation RPCs and in writeback vs truncate to prevent parallel operations from deadlocking against the server on one side and local page locks on the other. Fix this by moving the getting of the name and value in {get,remove}xattr() outside of the sb_writers lock. This also has the minor benefits that we don't need to reget these in the event of a retry and we never try to take the sb_writers lock in the event we can't pull the name and value into the kernel. Alternative approaches that might fix this include moving the dispatch of a write to the cache off to a workqueue or trying to do without the validation lock in afs. Note that this might also affect other filesystems that use netfslib and/or cachefiles. ====================================================== WARNING: possible circular locking dependency detected 6.10.0-build2+ torvalds#956 Not tainted ------------------------------------------------------ fsstress/6050 is trying to acquire lock: ffff888138fd82f0 (mapping.invalidate_lock#3){++++}-{3:3}, at: filemap_fault+0x26e/0x8b0 but task is already holding lock: ffff888113f26d18 (&vma->vm_lock->lock){++++}-{3:3}, at: lock_vma_under_rcu+0x165/0x250 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #4 (&vma->vm_lock->lock){++++}-{3:3}: __lock_acquire+0xaf0/0xd80 lock_acquire.part.0+0x103/0x280 down_write+0x3b/0x50 vma_start_write+0x6b/0xa0 vma_link+0xcc/0x140 insert_vm_struct+0xb7/0xf0 alloc_bprm+0x2c1/0x390 kernel_execve+0x65/0x1a0 call_usermodehelper_exec_async+0x14d/0x190 ret_from_fork+0x24/0x40 ret_from_fork_asm+0x1a/0x30 -> #3 (&mm->mmap_lock){++++}-{3:3}: __lock_acquire+0xaf0/0xd80 lock_acquire.part.0+0x103/0x280 __might_fault+0x7c/0xb0 strncpy_from_user+0x25/0x160 removexattr+0x7f/0x100 __do_sys_fremovexattr+0x7e/0xb0 do_syscall_64+0x9f/0x100 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #2 (sb_writers#14){.+.+}-{0:0}: __lock_acquire+0xaf0/0xd80 lock_acquire.part.0+0x103/0x280 percpu_down_read+0x3c/0x90 vfs_iocb_iter_write+0xe9/0x1d0 __cachefiles_write+0x367/0x430 cachefiles_issue_write+0x299/0x2f0 netfs_advance_write+0x117/0x140 netfs_write_folio.isra.0+0x5ca/0x6e0 netfs_writepages+0x230/0x2f0 afs_writepages+0x4d/0x70 do_writepages+0x1e8/0x3e0 filemap_fdatawrite_wbc+0x84/0xa0 __filemap_fdatawrite_range+0xa8/0xf0 file_write_and_wait_range+0x59/0x90 afs_release+0x10f/0x270 __fput+0x25f/0x3d0 __do_sys_close+0x43/0x70 do_syscall_64+0x9f/0x100 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #1 (&vnode->validate_lock){++++}-{3:3}: __lock_acquire+0xaf0/0xd80 lock_acquire.part.0+0x103/0x280 down_read+0x95/0x200 afs_writepages+0x37/0x70 do_writepages+0x1e8/0x3e0 filemap_fdatawrite_wbc+0x84/0xa0 filemap_invalidate_inode+0x167/0x1e0 netfs_unbuffered_write_iter+0x1bd/0x2d0 vfs_write+0x22e/0x320 ksys_write+0xbc/0x130 do_syscall_64+0x9f/0x100 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #0 (mapping.invalidate_lock#3){++++}-{3:3}: check_noncircular+0x119/0x160 check_prev_add+0x195/0x430 __lock_acquire+0xaf0/0xd80 lock_acquire.part.0+0x103/0x280 down_read+0x95/0x200 filemap_fault+0x26e/0x8b0 __do_fault+0x57/0xd0 do_pte_missing+0x23b/0x320 __handle_mm_fault+0x2d4/0x320 handle_mm_fault+0x14f/0x260 do_user_addr_fault+0x2a2/0x500 exc_page_fault+0x71/0x90 asm_exc_page_fault+0x22/0x30 other info that might help us debug this: Chain exists of: mapping.invalidate_lock#3 --> &mm->mmap_lock --> &vma->vm_lock->lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- rlock(&vma->vm_lock->lock); lock(&mm->mmap_lock); lock(&vma->vm_lock->lock); rlock(mapping.invalidate_lock#3); *** DEADLOCK *** 1 lock held by fsstress/6050: #0: ffff888113f26d18 (&vma->vm_lock->lock){++++}-{3:3}, at: lock_vma_under_rcu+0x165/0x250 stack backtrace: CPU: 0 PID: 6050 Comm: fsstress Not tainted 6.10.0-build2+ torvalds#956 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Call Trace: <TASK> dump_stack_lvl+0x57/0x80 check_noncircular+0x119/0x160 ? queued_spin_lock_slowpath+0x4be/0x510 ? __pfx_check_noncircular+0x10/0x10 ? __pfx_queued_spin_lock_slowpath+0x10/0x10 ? mark_lock+0x47/0x160 ? init_chain_block+0x9c/0xc0 ? add_chain_block+0x84/0xf0 check_prev_add+0x195/0x430 __lock_acquire+0xaf0/0xd80 ? __pfx___lock_acquire+0x10/0x10 ? __lock_release.isra.0+0x13b/0x230 lock_acquire.part.0+0x103/0x280 ? filemap_fault+0x26e/0x8b0 ? __pfx_lock_acquire.part.0+0x10/0x10 ? rcu_is_watching+0x34/0x60 ? lock_acquire+0xd7/0x120 down_read+0x95/0x200 ? filemap_fault+0x26e/0x8b0 ? __pfx_down_read+0x10/0x10 ? __filemap_get_folio+0x25/0x1a0 filemap_fault+0x26e/0x8b0 ? __pfx_filemap_fault+0x10/0x10 ? find_held_lock+0x7c/0x90 ? __pfx___lock_release.isra.0+0x10/0x10 ? __pte_offset_map+0x99/0x110 __do_fault+0x57/0xd0 do_pte_missing+0x23b/0x320 __handle_mm_fault+0x2d4/0x320 ? __pfx___handle_mm_fault+0x10/0x10 handle_mm_fault+0x14f/0x260 do_user_addr_fault+0x2a2/0x500 exc_page_fault+0x71/0x90 asm_exc_page_fault+0x22/0x30 Signed-off-by: David Howells <[email protected]> Link: https://lore.kernel.org/r/[email protected] cc: Alexander Viro <[email protected]> cc: Christian Brauner <[email protected]> cc: Jan Kara <[email protected]> cc: Jeff Layton <[email protected]> cc: Gao Xiang <[email protected]> cc: Matthew Wilcox <[email protected]> cc: [email protected] cc: [email protected] cc: [email protected] [brauner: fix minor issues] Signed-off-by: Christian Brauner <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

I have done a lot of analysis for these type of devices and collaborated quite a bit with Nick Weihs (author of the first patch submitted for this including adding samsung_helper.c). More information can be found in the issue on Github [1] including additional rationale and testing. The existing implementation includes a large number of equalizer coef values that are not necessary to actually init and enable the speaker amps, as well as create a somewhat worse sound profile. Users have reported "muffled" or "muddy" sound; more information about this including my analysis of the differences can be found in the linked Github issue. This patch refactors the "v2" version of ALC298_FIXUP_SAMSUNG_AMP to a much simpler implementation which removes the new samsung_helper.c, reuses more of the existing patch_realtek.c, and sends significantly fewer unnecessary coef values (including removing all of these EQ-specific coef values). A pcm_playback_hook is used to dynamically enable and disable the speaker amps only when there will be audio playback; this is to match the behavior of how the driver for these devices is working in Windows, and is suspected but not yet tested or confirmed to help with power consumption. Support for models with 2 speaker amps vs 4 speaker amps is controlled by a specific quirk name for both types. A new int num_speaker_amps has been added to alc_spec so that the hooks can know how many speaker amps to enable or disable. This design was chosen to limit the number of places that subsystem ids will need to be maintained: like this, they can be maintained only once in the quirk table and there will not be another separate list of subsystem ids to maintain elsewhere in the code. Also updated the quirk name from ALC298_FIXUP_SAMSUNG_AMP2 to ALC298_FIXUP_SAMSUNG_AMP_V2_.. as this is not a quirk for "Amp openbmc#2" on ALC298 but is instead a different version of how to handle it. More devices have been added (see Github issue for testing confirmation), as well as a small cleanup to existing names. [1]: thesofproject#4055 (comment) Signed-off-by: Joshua Grisham <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Takashi Iwai <[email protected]>

Daniel Machon says: ==================== net: lan966x: use the newly introduced FDMA library This patch series is the second of a 2-part series [1], that adds a new common FDMA library for Microchip switch chips Sparx5 and lan966x. These chips share the same FDMA engine, and as such will benefit from a common library with a common implementation. This also has the benefit of removing a lot of open-coded bookkeeping and duplicate code for the two drivers. In this second series, the FDMA library will be taken into use by the lan966x switch driver. ################### # Example of use: # ################### - Initialize the rx and tx fdma structs with values for: number of DCB's, number of DB's, channel ID, DB size (data buffer size), and total size of the requested memory. Also provide two callbacks: nextptr_cb() and dataptr_cb() for getting the nextptr and dataptr. - Allocate memory using fdma_alloc_phys() or fdma_alloc_coherent(). - Initialize the DCB's with fdma_dcb_init(). - Add new DCB's with fdma_dcb_add(). - Free memory with fdma_free_phys() or fdma_free_coherent(). ##################### # Patch breakdown: # ##################### Patch openbmc#1: select FDMA library for lan966x. Patch openbmc#2: includes the fdma_api.h header and removes old symbols. Patch openbmc#3: replaces old rx and tx variables with equivalent ones from the fdma struct. Only the variables that can be changed without breaking traffic is changed in this patch. Patch openbmc#4: uses the library for allocation of rx buffers. This requires quite a bit of refactoring in this single patch. Patch openbmc#5: uses the library for adding DCB's in the rx path. Patch openbmc#6: uses the library for freeing rx buffers. Patch openbmc#7: uses the library for allocation of tx buffers. This requires quite a bit of refactoring in this single patch. Patch openbmc#8: uses the library for adding DCB's in the tx path. Patch openbmc#9: uses the library helpers in the tx path. Patch openbmc#10: ditch last_in_use variable and use library instead. Patch openbmc#11: uses library helpers throughout. Patch openbmc#12: refactor lan966x_fdma_reload() function. [1] https://lore.kernel.org/netdev/[email protected]/ Signed-off-by: Daniel Machon <[email protected]> ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]>

Mina Almasry says: ==================== Device Memory TCP Device memory TCP (devmem TCP) is a proposal for transferring data to and/or from device memory efficiently, without bouncing the data to a host memory buffer. * Problem: A large amount of data transfers have device memory as the source and/or destination. Accelerators drastically increased the volume of such transfers. Some examples include: - ML accelerators transferring large amounts of training data from storage into GPU/TPU memory. In some cases ML training setup time can be as long as 50% of TPU compute time, improving data transfer throughput & efficiency can help improving GPU/TPU utilization. - Distributed training, where ML accelerators, such as GPUs on different hosts, exchange data among them. - Distributed raw block storage applications transfer large amounts of data with remote SSDs, much of this data does not require host processing. Today, the majority of the Device-to-Device data transfers the network are implemented as the following low level operations: Device-to-Host copy, Host-to-Host network transfer, and Host-to-Device copy. The implementation is suboptimal, especially for bulk data transfers, and can put significant strains on system resources, such as host memory bandwidth, PCIe bandwidth, etc. One important reason behind the current state is the kernel’s lack of semantics to express device to network transfers. * Proposal: In this patch series we attempt to optimize this use case by implementing socket APIs that enable the user to: 1. send device memory across the network directly, and 2. receive incoming network packets directly into device memory. Packet _payloads_ go directly from the NIC to device memory for receive and from device memory to NIC for transmit. Packet _headers_ go to/from host memory and are processed by the TCP/IP stack normally. The NIC _must_ support header split to achieve this. Advantages: - Alleviate host memory bandwidth pressure, compared to existing network-transfer + device-copy semantics. - Alleviate PCIe BW pressure, by limiting data transfer to the lowest level of the PCIe tree, compared to traditional path which sends data through the root complex. * Patch overview: ** Part 1: netlink API Gives user ability to bind dma-buf to an RX queue. ** Part 2: scatterlist support Currently the standard for device memory sharing is DMABUF, which doesn't generate struct pages. On the other hand, networking stack (skbs, drivers, and page pool) operate on pages. We have 2 options: 1. Generate struct pages for dmabuf device memory, or, 2. Modify the networking stack to process scatterlist. Approach openbmc#1 was attempted in RFC v1. RFC v2 implements approach openbmc#2. ** part 3: page pool support We piggy back on page pool memory providers proposal: https://github.com/kuba-moo/linux/tree/pp-providers It allows the page pool to define a memory provider that provides the page allocation and freeing. It helps abstract most of the device memory TCP changes from the driver. ** part 4: support for unreadable skb frags Page pool iovs are not accessible by the host; we implement changes throughput the networking stack to correctly handle skbs with unreadable frags. ** Part 5: recvmsg() APIs We define user APIs for the user to send and receive device memory. Not included with this series is the GVE devmem TCP support, just to simplify the review. Code available here if desired: https://github.com/mina/linux/tree/tcpdevmem This series is built on top of net-next with Jakub's pp-providers changes cherry-picked. * NIC dependencies: 1. (strict) Devmem TCP require the NIC to support header split, i.e. the capability to split incoming packets into a header + payload and to put each into a separate buffer. Devmem TCP works by using device memory for the packet payload, and host memory for the packet headers. 2. (optional) Devmem TCP works better with flow steering support & RSS support, i.e. the NIC's ability to steer flows into certain rx queues. This allows the sysadmin to enable devmem TCP on a subset of the rx queues, and steer devmem TCP traffic onto these queues and non devmem TCP elsewhere. The NIC I have access to with these properties is the GVE with DQO support running in Google Cloud, but any NIC that supports these features would suffice. I may be able to help reviewers bring up devmem TCP on their NICs. * Testing: The series includes a udmabuf kselftest that show a simple use case of devmem TCP and validates the entire data path end to end without a dependency on a specific dmabuf provider. ** Test Setup Kernel: net-next with this series and memory provider API cherry-picked locally. Hardware: Google Cloud A3 VMs. NIC: GVE with header split & RSS & flow steering support. ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

…git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following batch contains two fixes from Florian Westphal: Patch openbmc#1 fixes a sk refcount leak in nft_socket on mismatch. Patch openbmc#2 fixes cgroupsv2 matching from containers due to incorrect level in subtree. netfilter pull request 24-09-12 * tag 'nf-24-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nft_socket: make cgroupsv2 matching work with namespaces netfilter: nft_socket: fix sk refcount leaks ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]>

Ido Schimmel says: ==================== net: fib_rules: Add DSCP selector support Currently, the kernel rejects IPv4 FIB rules that try to match on the upper three DSCP bits: # ip -4 rule add tos 0x1c table 100 # ip -4 rule add tos 0x3c table 100 Error: Invalid tos. The reason for that is that historically users of the FIB lookup API only populated the lower three DSCP bits in the TOS field of the IPv4 flow key ('flowi4_tos'), which fits the TOS definition from the initial IPv4 specification (RFC 791). This is not very useful nowadays and instead some users want to be able to match on the six bits DSCP field, which replaced the TOS and IP precedence fields over 25 years ago (RFC 2474). In addition, the current behavior differs between IPv4 and IPv6 which does allow users to match on the entire DSCP field using the TOS selector. Recent patchsets made sure that callers of the FIB lookup API now populate the entire DSCP field in the IPv4 flow key. Therefore, it is now possible to extend FIB rules to match on DSCP. This is done by adding a new DSCP attribute which is implemented for both IPv4 and IPv6 to provide user space programs a consistent behavior between both address families. The behavior of the old TOS selector is unchanged and IPv4 FIB rules using it will only match on the lower three DSCP bits. The kernel will reject rules that try to use both selectors. Patch openbmc#1 adds the new DSCP attribute but rejects its usage. Patches openbmc#2-openbmc#3 implement IPv4 and IPv6 support. Patch openbmc#4 allows user space to use the new attribute. Patches openbmc#5-openbmc#6 add selftests. ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

Nelson Escobar says: ==================== enic: Report per queue stats Patch openbmc#1: Use a macro instead of static const variables for array sizes. I didn't want to add more static const variables in the next patch so clean up the existing ones first. Patch openbmc#2: Collect per queue statistics Patch openbmc#3: Report per queue stats in netdev qstats Patch openbmc#4: Report some per queue stats in ethtool # NETIF="eno6" tools/testing/selftests/drivers/net/stats.py KTAP version 1 1..5 ok 1 stats.check_pause # XFAIL pause not supported by the device ok 2 stats.check_fec # XFAIL FEC not supported by the device ok 3 stats.pkt_byte_sum ok 4 stats.qstat_by_ifindex ok 5 stats.check_down # tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \ --dump qstats-get --json '{"ifindex": "34"}' [{'ifindex': 34, 'rx-bytes': 66762680, 'rx-csum-unnecessary': 1009345, 'rx-hw-drop-overruns': 0, 'rx-hw-drops': 0, 'rx-packets': 1009673, 'tx-bytes': 137936674899, 'tx-csum-none': 125, 'tx-hw-gso-packets': 2408712, 'tx-needs-csum': 2431531, 'tx-packets': 15475466, 'tx-stop': 0, 'tx-wake': 0}] v2: https://lore.kernel.org/[email protected] v1: https://lore.kernel.org/[email protected] ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

Add nested locking with I_MUTEX_XATTR subclass to avoid lockdep warning while handling xattr inode on file open syscall at ext4_xattr_inode_iget. Backtrace EXT4-fs (loop0): Ignoring removed oldalloc option ====================================================== WARNING: possible circular locking dependency detected 5.10.0-syzkaller #0 Not tainted ------------------------------------------------------ syz-executor543/2794 is trying to acquire lock: ffff8880215e1a48 (&ea_inode->i_rwsem#7/1){+.+.}-{3:3}, at: inode_lock include/linux/fs.h:782 [inline] ffff8880215e1a48 (&ea_inode->i_rwsem#7/1){+.+.}-{3:3}, at: ext4_xattr_inode_iget+0x42a/0x5c0 fs/ext4/xattr.c:425 but task is already holding lock: ffff8880215e3278 (&ei->i_data_sem/3){++++}-{3:3}, at: ext4_setattr+0x136d/0x19c0 fs/ext4/inode.c:5559 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> openbmc#1 (&ei->i_data_sem/3){++++}-{3:3}: lock_acquire+0x197/0x480 kernel/locking/lockdep.c:5566 down_write+0x93/0x180 kernel/locking/rwsem.c:1564 ext4_update_i_disksize fs/ext4/ext4.h:3267 [inline] ext4_xattr_inode_write fs/ext4/xattr.c:1390 [inline] ext4_xattr_inode_lookup_create fs/ext4/xattr.c:1538 [inline] ext4_xattr_set_entry+0x331a/0x3d80 fs/ext4/xattr.c:1662 ext4_xattr_ibody_set+0x124/0x390 fs/ext4/xattr.c:2228 ext4_xattr_set_handle+0xc27/0x14e0 fs/ext4/xattr.c:2385 ext4_xattr_set+0x219/0x390 fs/ext4/xattr.c:2498 ext4_xattr_user_set+0xc9/0xf0 fs/ext4/xattr_user.c:40 __vfs_setxattr+0x404/0x450 fs/xattr.c:177 __vfs_setxattr_noperm+0x11d/0x4f0 fs/xattr.c:208 __vfs_setxattr_locked+0x1f9/0x210 fs/xattr.c:266 vfs_setxattr+0x112/0x2c0 fs/xattr.c:283 setxattr+0x1db/0x3e0 fs/xattr.c:548 path_setxattr+0x15a/0x240 fs/xattr.c:567 __do_sys_setxattr fs/xattr.c:582 [inline] __se_sys_setxattr fs/xattr.c:578 [inline] __x64_sys_setxattr+0xc5/0xe0 fs/xattr.c:578 do_syscall_64+0x6d/0xa0 arch/x86/entry/common.c:62 entry_SYSCALL_64_after_hwframe+0x61/0xcb -> #0 (&ea_inode->i_rwsem#7/1){+.+.}-{3:3}: check_prev_add kernel/locking/lockdep.c:2988 [inline] check_prevs_add kernel/locking/lockdep.c:3113 [inline] validate_chain+0x1695/0x58f0 kernel/locking/lockdep.c:3729 __lock_acquire+0x12fd/0x20d0 kernel/locking/lockdep.c:4955 lock_acquire+0x197/0x480 kernel/locking/lockdep.c:5566 down_write+0x93/0x180 kernel/locking/rwsem.c:1564 inode_lock include/linux/fs.h:782 [inline] ext4_xattr_inode_iget+0x42a/0x5c0 fs/ext4/xattr.c:425 ext4_xattr_inode_get+0x138/0x410 fs/ext4/xattr.c:485 ext4_xattr_move_to_block fs/ext4/xattr.c:2580 [inline] ext4_xattr_make_inode_space fs/ext4/xattr.c:2682 [inline] ext4_expand_extra_isize_ea+0xe70/0x1bb0 fs/ext4/xattr.c:2774 __ext4_expand_extra_isize+0x304/0x3f0 fs/ext4/inode.c:5898 ext4_try_to_expand_extra_isize fs/ext4/inode.c:5941 [inline] __ext4_mark_inode_dirty+0x591/0x810 fs/ext4/inode.c:6018 ext4_setattr+0x1400/0x19c0 fs/ext4/inode.c:5562 notify_change+0xbb6/0xe60 fs/attr.c:435 do_truncate+0x1de/0x2c0 fs/open.c:64 handle_truncate fs/namei.c:2970 [inline] do_open fs/namei.c:3311 [inline] path_openat+0x29f3/0x3290 fs/namei.c:3425 do_filp_open+0x20b/0x450 fs/namei.c:3452 do_sys_openat2+0x124/0x460 fs/open.c:1207 do_sys_open fs/open.c:1223 [inline] __do_sys_open fs/open.c:1231 [inline] __se_sys_open fs/open.c:1227 [inline] __x64_sys_open+0x221/0x270 fs/open.c:1227 do_syscall_64+0x6d/0xa0 arch/x86/entry/common.c:62 entry_SYSCALL_64_after_hwframe+0x61/0xcb other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ei->i_data_sem/3); lock(&ea_inode->i_rwsem#7/1); lock(&ei->i_data_sem/3); lock(&ea_inode->i_rwsem#7/1); *** DEADLOCK *** 5 locks held by syz-executor543/2794: #0: ffff888026fbc448 (sb_writers#4){.+.+}-{0:0}, at: mnt_want_write+0x4a/0x2a0 fs/namespace.c:365 openbmc#1: ffff8880215e3488 (&sb->s_type->i_mutex_key#7){++++}-{3:3}, at: inode_lock include/linux/fs.h:782 [inline] openbmc#1: ffff8880215e3488 (&sb->s_type->i_mutex_key#7){++++}-{3:3}, at: do_truncate+0x1cf/0x2c0 fs/open.c:62 openbmc#2: ffff8880215e3310 (&ei->i_mmap_sem){++++}-{3:3}, at: ext4_setattr+0xec4/0x19c0 fs/ext4/inode.c:5519 openbmc#3: ffff8880215e3278 (&ei->i_data_sem/3){++++}-{3:3}, at: ext4_setattr+0x136d/0x19c0 fs/ext4/inode.c:5559 openbmc#4: ffff8880215e30c8 (&ei->xattr_sem){++++}-{3:3}, at: ext4_write_trylock_xattr fs/ext4/xattr.h:162 [inline] openbmc#4: ffff8880215e30c8 (&ei->xattr_sem){++++}-{3:3}, at: ext4_try_to_expand_extra_isize fs/ext4/inode.c:5938 [inline] openbmc#4: ffff8880215e30c8 (&ei->xattr_sem){++++}-{3:3}, at: __ext4_mark_inode_dirty+0x4fb/0x810 fs/ext4/inode.c:6018 stack backtrace: CPU: 1 PID: 2794 Comm: syz-executor543 Not tainted 5.10.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x177/0x211 lib/dump_stack.c:118 print_circular_bug+0x146/0x1b0 kernel/locking/lockdep.c:2002 check_noncircular+0x2cc/0x390 kernel/locking/lockdep.c:2123 check_prev_add kernel/locking/lockdep.c:2988 [inline] check_prevs_add kernel/locking/lockdep.c:3113 [inline] validate_chain+0x1695/0x58f0 kernel/locking/lockdep.c:3729 __lock_acquire+0x12fd/0x20d0 kernel/locking/lockdep.c:4955 lock_acquire+0x197/0x480 kernel/locking/lockdep.c:5566 down_write+0x93/0x180 kernel/locking/rwsem.c:1564 inode_lock include/linux/fs.h:782 [inline] ext4_xattr_inode_iget+0x42a/0x5c0 fs/ext4/xattr.c:425 ext4_xattr_inode_get+0x138/0x410 fs/ext4/xattr.c:485 ext4_xattr_move_to_block fs/ext4/xattr.c:2580 [inline] ext4_xattr_make_inode_space fs/ext4/xattr.c:2682 [inline] ext4_expand_extra_isize_ea+0xe70/0x1bb0 fs/ext4/xattr.c:2774 __ext4_expand_extra_isize+0x304/0x3f0 fs/ext4/inode.c:5898 ext4_try_to_expand_extra_isize fs/ext4/inode.c:5941 [inline] __ext4_mark_inode_dirty+0x591/0x810 fs/ext4/inode.c:6018 ext4_setattr+0x1400/0x19c0 fs/ext4/inode.c:5562 notify_change+0xbb6/0xe60 fs/attr.c:435 do_truncate+0x1de/0x2c0 fs/open.c:64 handle_truncate fs/namei.c:2970 [inline] do_open fs/namei.c:3311 [inline] path_openat+0x29f3/0x3290 fs/namei.c:3425 do_filp_open+0x20b/0x450 fs/namei.c:3452 do_sys_openat2+0x124/0x460 fs/open.c:1207 do_sys_open fs/open.c:1223 [inline] __do_sys_open fs/open.c:1231 [inline] __se_sys_open fs/open.c:1227 [inline] __x64_sys_open+0x221/0x270 fs/open.c:1227 do_syscall_64+0x6d/0xa0 arch/x86/entry/common.c:62 entry_SYSCALL_64_after_hwframe+0x61/0xcb RIP: 0033:0x7f0cde4ea229 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 21 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffd81d1c978 EFLAGS: 00000246 ORIG_RAX: 0000000000000002 RAX: ffffffffffffffda RBX: 0030656c69662f30 RCX: 00007f0cde4ea229 RDX: 0000000000000089 RSI: 00000000000a0a00 RDI: 00000000200001c0 RBP: 2f30656c69662f2e R08: 0000000000208000 R09: 0000000000208000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffd81d1c9c0 R13: 00007ffd81d1ca00 R14: 0000000000080000 R15: 0000000000000003 EXT4-fs error (device loop0): ext4_expand_extra_isize_ea:2730: inode openbmc#13: comm syz-executor543: corrupted in-inode xattr Signed-off-by: Wojciech Gładysz <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Theodore Ts'o <[email protected]>

The fields in the hist_entry are filled on-demand which means they only have meaningful values when relevant sort keys are used. So if neither of 'dso' nor 'sym' sort keys are used, the map/symbols in the hist entry can be garbage. So it shouldn't access it unconditionally. I got a segfault, when I wanted to see cgroup profiles. $ sudo perf record -a --all-cgroups --synth=cgroup true $ sudo perf report -s cgroup Program received signal SIGSEGV, Segmentation fault. 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 48 return RC_CHK_ACCESS(map)->dso; (gdb) bt #0 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 openbmc#1 0x00005555557aa39b in map__load (map=0x0) at util/map.c:344 openbmc#2 0x00005555557aa592 in map__find_symbol (map=0x0, addr=140736115941088) at util/map.c:385 openbmc#3 0x00005555557ef000 in hists__findnew_entry (hists=0x555556039d60, entry=0x7fffffffa4c0, al=0x7fffffffa8c0, sample_self=true) at util/hist.c:644 openbmc#4 0x00005555557ef61c in __hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, block_info=0x0, sample=0x7fffffffaa90, sample_self=true, ops=0x0) at util/hist.c:761 openbmc#5 0x00005555557ef71f in hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, sample=0x7fffffffaa90, sample_self=true) at util/hist.c:779 openbmc#6 0x00005555557f00fb in iter_add_single_normal_entry (iter=0x7fffffffa900, al=0x7fffffffa8c0) at util/hist.c:1015 openbmc#7 0x00005555557f09a7 in hist_entry_iter__add (iter=0x7fffffffa900, al=0x7fffffffa8c0, max_stack_depth=127, arg=0x7fffffffbce0) at util/hist.c:1260 openbmc#8 0x00005555555ba7ce in process_sample_event (tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at builtin-report.c:334 openbmc#9 0x00005555557b30c8 in evlist__deliver_sample (evlist=0x555556039010, tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at util/session.c:1232 openbmc#10 0x00005555557b32bc in machines__deliver_event (machines=0x5555560388e8, evlist=0x555556039010, event=0x7ffff7c14128, sample=0x7fffffffaa90, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1271 openbmc#11 0x00005555557b3848 in perf_session__deliver_event (session=0x5555560386d0, event=0x7ffff7c14128, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1354 openbmc#12 0x00005555557affaf in ordered_events__deliver_event (oe=0x555556038e60, event=0x555556135aa0) at util/session.c:132 openbmc#13 0x00005555557bb605 in do_flush (oe=0x555556038e60, show_progress=false) at util/ordered-events.c:245 openbmc#14 0x00005555557bb95c in __ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND, timestamp=0) at util/ordered-events.c:324 openbmc#15 0x00005555557bba46 in ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND) at util/ordered-events.c:342 openbmc#16 0x00005555557b1b3b in perf_event__process_finished_round (tool=0x7fffffffbce0, event=0x7ffff7c15bb8, oe=0x555556038e60) at util/session.c:780 openbmc#17 0x00005555557b3b27 in perf_session__process_user_event (session=0x5555560386d0, event=0x7ffff7c15bb8, file_offset=117688, file_path=0x555556038ff0 "perf.data") at util/session.c:1406 As you can see the entry->ms.map was NULL even if he->ms.map has a value. This is because 'sym' sort key is not given, so it cannot assume whether he->ms.sym and entry->ms.sym is the same. I only checked the 'sym' sort key here as it implies 'dso' behavior (so maps are the same). Fixes: ac01c8c ("perf hist: Update hist symbol when updating maps") Signed-off-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Matt Fleming <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

…ptions Patch series "mm: split PTE/PMD PT table Kconfig cleanups+clarifications". This series is a follow up to the fixes: "[PATCH v1 0/2] mm/hugetlb: fix hugetlb vs. core-mm PT locking" When working on the fixes, I wondered why 8xx is fine (-> never uses split PT locks) and how PT locking even works properly with PMD page table sharing (-> always requires split PMD PT locks). Let's improve the split PT lock detection, make hugetlb properly depend on it and make 8xx bail out if it would ever get enabled by accident. As an alternative to patch openbmc#3 we could extend the Kconfig SPLIT_PTE_PTLOCKS option from patch openbmc#2 -- but enforcing it closer to the code that actually implements it feels a bit nicer for documentation purposes, and there is no need to actually disable it because it should always be disabled (!SMP). Did a bunch of cross-compilations to make sure that split PTE/PMD PT locks are still getting used where we would expect them. [1] https://lkml.kernel.org/r/[email protected] This patch (of 3): Let's clean that up a bit and prepare for depending on CONFIG_SPLIT_PMD_PTLOCKS in other Kconfig options. More cleanups would be reasonable (like the arch-specific "depends on" for CONFIG_SPLIT_PTE_PTLOCKS), but we'll leave that for another day. Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: David Hildenbrand <[email protected]> Acked-by: Mike Rapoport (Microsoft) <[email protected]> Reviewed-by: Russell King (Oracle) <[email protected]> Reviewed-by: Qi Zheng <[email protected]> Cc: Alexander Viro <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Boris Ostrovsky <[email protected]> Cc: Christian Brauner <[email protected]> Cc: Christophe Leroy <[email protected]> Cc: Dave Hansen <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Juergen Gross <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Muchun Song <[email protected]> Cc: "Naveen N. Rao" <[email protected]> Cc: Nicholas Piggin <[email protected]> Cc: Oscar Salvador <[email protected]> Cc: Peter Xu <[email protected]> Cc: Thomas Gleixner <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

commit 823430c ("memory tier: consolidate the initialization of memory tiers") introduces a locking change that use guard(mutex) to instead of mutex_lock/unlock() for memory_tier_lock. It unexpectedly expanded the locked region to include the hotplug_memory_notifier(), as a result, it triggers an locking dependency detected of ABBA deadlock. Exclude hotplug_memory_notifier() from the locked region to fixing it. The deadlock scenario is that when a memory online event occurs, the execution of memory notifier will access the read lock of the memory_chain.rwsem, then the reigistration of the memory notifier in memory_tier_init() acquires the write lock of the memory_chain.rwsem while holding memory_tier_lock. Then the memory online event continues to invoke the memory hotplug callback registered by memory_tier_init(). Since this callback tries to acquire the memory_tier_lock, a deadlock occurs. In fact, this deadlock can't happen because memory_tier_init() always executes before memory online events happen due to the subsys_initcall() has an higher priority than module_init(). [ 133.491106] WARNING: possible circular locking dependency detected [ 133.493656] 6.11.0-rc2+ openbmc#146 Tainted: G O N [ 133.504290] ------------------------------------------------------ [ 133.515194] (udev-worker)/1133 is trying to acquire lock: [ 133.525715] ffffffff87044e28 (memory_tier_lock){+.+.}-{3:3}, at: memtier_hotplug_callback+0x383/0x4b0 [ 133.536449] [ 133.536449] but task is already holding lock: [ 133.549847] ffffffff875d3310 ((memory_chain).rwsem){++++}-{3:3}, at: blocking_notifier_call_chain+0x60/0xb0 [ 133.556781] [ 133.556781] which lock already depends on the new lock. [ 133.556781] [ 133.569957] [ 133.569957] the existing dependency chain (in reverse order) is: [ 133.577618] [ 133.577618] -> openbmc#1 ((memory_chain).rwsem){++++}-{3:3}: [ 133.584997] down_write+0x97/0x210 [ 133.588647] blocking_notifier_chain_register+0x71/0xd0 [ 133.592537] register_memory_notifier+0x26/0x30 [ 133.596314] memory_tier_init+0x187/0x300 [ 133.599864] do_one_initcall+0x117/0x5d0 [ 133.603399] kernel_init_freeable+0xab0/0xeb0 [ 133.606986] kernel_init+0x28/0x2f0 [ 133.610312] ret_from_fork+0x59/0x90 [ 133.613652] ret_from_fork_asm+0x1a/0x30 [ 133.617012] [ 133.617012] -> #0 (memory_tier_lock){+.+.}-{3:3}: [ 133.623390] __lock_acquire+0x2efd/0x5c60 [ 133.626730] lock_acquire+0x1ce/0x580 [ 133.629757] __mutex_lock+0x15c/0x1490 [ 133.632731] mutex_lock_nested+0x1f/0x30 [ 133.635717] memtier_hotplug_callback+0x383/0x4b0 [ 133.638748] notifier_call_chain+0xbf/0x370 [ 133.641647] blocking_notifier_call_chain+0x76/0xb0 [ 133.644636] memory_notify+0x2e/0x40 [ 133.647427] online_pages+0x597/0x720 [ 133.650246] memory_subsys_online+0x4f6/0x7f0 [ 133.653107] device_online+0x141/0x1d0 [ 133.655831] online_memory_block+0x4d/0x60 [ 133.658616] walk_memory_blocks+0xc0/0x120 [ 133.661419] add_memory_resource+0x51d/0x6c0 [ 133.664202] add_memory_driver_managed+0xf5/0x180 [ 133.667060] dev_dax_kmem_probe+0x7f7/0xb40 [kmem] [ 133.669949] dax_bus_probe+0x147/0x230 [ 133.672687] really_probe+0x27f/0xac0 [ 133.675463] __driver_probe_device+0x1f3/0x460 [ 133.678493] driver_probe_device+0x56/0x1b0 [ 133.681366] __driver_attach+0x277/0x570 [ 133.684149] bus_for_each_dev+0x145/0x1e0 [ 133.686937] driver_attach+0x49/0x60 [ 133.689673] bus_add_driver+0x2f3/0x6b0 [ 133.692421] driver_register+0x170/0x4b0 [ 133.695118] __dax_driver_register+0x141/0x1b0 [ 133.697910] dax_kmem_init+0x54/0xff0 [kmem] [ 133.700794] do_one_initcall+0x117/0x5d0 [ 133.703455] do_init_module+0x277/0x750 [ 133.706054] load_module+0x5d1d/0x74f0 [ 133.708602] init_module_from_file+0x12c/0x1a0 [ 133.711234] idempotent_init_module+0x3f1/0x690 [ 133.713937] __x64_sys_finit_module+0x10e/0x1a0 [ 133.716492] x64_sys_call+0x184d/0x20d0 [ 133.719053] do_syscall_64+0x6d/0x140 [ 133.721537] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 133.724239] [ 133.724239] other info that might help us debug this: [ 133.724239] [ 133.730832] Possible unsafe locking scenario: [ 133.730832] [ 133.735298] CPU0 CPU1 [ 133.737759] ---- ---- [ 133.740165] rlock((memory_chain).rwsem); [ 133.742623] lock(memory_tier_lock); [ 133.745357] lock((memory_chain).rwsem); [ 133.748141] lock(memory_tier_lock); [ 133.750489] [ 133.750489] *** DEADLOCK *** [ 133.750489] [ 133.756742] 6 locks held by (udev-worker)/1133: [ 133.759179] #0: ffff888207be6158 (&dev->mutex){....}-{3:3}, at: __driver_attach+0x26c/0x570 [ 133.762299] openbmc#1: ffffffff875b5868 (device_hotplug_lock){+.+.}-{3:3}, at: lock_device_hotplug+0x20/0x30 [ 133.765565] openbmc#2: ffff88820cf6a108 (&dev->mutex){....}-{3:3}, at: device_online+0x2f/0x1d0 [ 133.768978] openbmc#3: ffffffff86d08ff0 (cpu_hotplug_lock){++++}-{0:0}, at: mem_hotplug_begin+0x17/0x30 [ 133.772312] openbmc#4: ffffffff8702dfb0 (mem_hotplug_lock){++++}-{0:0}, at: mem_hotplug_begin+0x23/0x30 [ 133.775544] openbmc#5: ffffffff875d3310 ((memory_chain).rwsem){++++}-{3:3}, at: blocking_notifier_call_chain+0x60/0xb0 [ 133.779113] [ 133.779113] stack backtrace: [ 133.783728] CPU: 5 UID: 0 PID: 1133 Comm: (udev-worker) Tainted: G O N 6.11.0-rc2+ openbmc#146 [ 133.787220] Tainted: [O]=OOT_MODULE, [N]=TEST [ 133.789948] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 [ 133.793291] Call Trace: [ 133.795826] <TASK> [ 133.798284] dump_stack_lvl+0xea/0x150 [ 133.801025] dump_stack+0x19/0x20 [ 133.803609] print_circular_bug+0x477/0x740 [ 133.806341] check_noncircular+0x2f4/0x3e0 [ 133.809056] ? __pfx_check_noncircular+0x10/0x10 [ 133.811866] ? __pfx_lockdep_lock+0x10/0x10 [ 133.814670] ? __sanitizer_cov_trace_const_cmp8+0x1c/0x30 [ 133.817610] __lock_acquire+0x2efd/0x5c60 [ 133.820339] ? __pfx___lock_acquire+0x10/0x10 [ 133.823128] ? __dax_driver_register+0x141/0x1b0 [ 133.825926] ? do_one_initcall+0x117/0x5d0 [ 133.828648] lock_acquire+0x1ce/0x580 [ 133.831349] ? memtier_hotplug_callback+0x383/0x4b0 [ 133.834293] ? __pfx_lock_acquire+0x10/0x10 [ 133.837134] __mutex_lock+0x15c/0x1490 [ 133.839829] ? memtier_hotplug_callback+0x383/0x4b0 [ 133.842753] ? memtier_hotplug_callback+0x383/0x4b0 [ 133.845602] ? __this_cpu_preempt_check+0x21/0x30 [ 133.848438] ? __pfx___mutex_lock+0x10/0x10 [ 133.851200] ? __pfx_lock_acquire+0x10/0x10 [ 133.853935] ? global_dirty_limits+0xc0/0x160 [ 133.856699] ? __sanitizer_cov_trace_switch+0x58/0xa0 [ 133.859564] mutex_lock_nested+0x1f/0x30 [ 133.862251] ? mutex_lock_nested+0x1f/0x30 [ 133.864964] memtier_hotplug_callback+0x383/0x4b0 [ 133.867752] notifier_call_chain+0xbf/0x370 [ 133.870550] ? writeback_set_ratelimit+0xe8/0x160 [ 133.873372] blocking_notifier_call_chain+0x76/0xb0 [ 133.876311] memory_notify+0x2e/0x40 [ 133.879013] online_pages+0x597/0x720 [ 133.881686] ? irqentry_exit+0x3e/0xa0 [ 133.884397] ? __pfx_online_pages+0x10/0x10 [ 133.887244] ? __sanitizer_cov_trace_const_cmp8+0x1c/0x30 [ 133.890299] ? mhp_init_memmap_on_memory+0x7a/0x1c0 [ 133.893203] memory_subsys_online+0x4f6/0x7f0 [ 133.896099] ? __pfx_memory_subsys_online+0x10/0x10 [ 133.899039] ? xa_load+0x16d/0x2e0 [ 133.901667] ? __pfx_xa_load+0x10/0x10 [ 133.904366] ? __pfx_memory_subsys_online+0x10/0x10 [ 133.907218] device_online+0x141/0x1d0 [ 133.909845] online_memory_block+0x4d/0x60 [ 133.912494] walk_memory_blocks+0xc0/0x120 [ 133.915104] ? __pfx_online_memory_block+0x10/0x10 [ 133.917776] add_memory_resource+0x51d/0x6c0 [ 133.920404] ? __pfx_add_memory_resource+0x10/0x10 [ 133.923104] ? _raw_write_unlock+0x31/0x60 [ 133.925781] ? register_memory_resource+0x119/0x180 [ 133.928450] add_memory_driver_managed+0xf5/0x180 [ 133.931036] dev_dax_kmem_probe+0x7f7/0xb40 [kmem] [ 133.933665] ? __pfx_dev_dax_kmem_probe+0x10/0x10 [kmem] [ 133.936332] ? __pfx___up_read+0x10/0x10 [ 133.938878] dax_bus_probe+0x147/0x230 [ 133.941332] ? __pfx_dax_bus_probe+0x10/0x10 [ 133.943954] really_probe+0x27f/0xac0 [ 133.946387] ? __sanitizer_cov_trace_const_cmp1+0x1e/0x30 [ 133.949106] __driver_probe_device+0x1f3/0x460 [ 133.951704] ? parse_option_str+0x149/0x190 [ 133.954241] driver_probe_device+0x56/0x1b0 [ 133.956749] __driver_attach+0x277/0x570 [ 133.959228] ? __pfx___driver_attach+0x10/0x10 [ 133.961776] bus_for_each_dev+0x145/0x1e0 [ 133.964367] ? __pfx_bus_for_each_dev+0x10/0x10 [ 133.967019] ? __kasan_check_read+0x15/0x20 [ 133.969543] ? _raw_spin_unlock+0x31/0x60 [ 133.972132] driver_attach+0x49/0x60 [ 133.974536] bus_add_driver+0x2f3/0x6b0 [ 133.977044] driver_register+0x170/0x4b0 [ 133.979480] __dax_driver_register+0x141/0x1b0 [ 133.982126] ? __pfx_dax_kmem_init+0x10/0x10 [kmem] [ 133.984724] dax_kmem_init+0x54/0xff0 [kmem] [ 133.987284] ? __pfx_dax_kmem_init+0x10/0x10 [kmem] [ 133.989965] do_one_initcall+0x117/0x5d0 [ 133.992506] ? __pfx_do_one_initcall+0x10/0x10 [ 133.995185] ? __kasan_kmalloc+0x88/0xa0 [ 133.997748] ? kasan_poison+0x3e/0x60 [ 134.000288] ? kasan_unpoison+0x2c/0x60 [ 134.002762] ? kasan_poison+0x3e/0x60 [ 134.005202] ? __asan_register_globals+0x62/0x80 [ 134.007753] ? __pfx_dax_kmem_init+0x10/0x10 [kmem] [ 134.010439] do_init_module+0x277/0x750 [ 134.012953] load_module+0x5d1d/0x74f0 [ 134.015406] ? __pfx_load_module+0x10/0x10 [ 134.017887] ? __pfx_ima_post_read_file+0x10/0x10 [ 134.020470] ? __sanitizer_cov_trace_const_cmp8+0x1c/0x30 [ 134.023127] ? __sanitizer_cov_trace_const_cmp4+0x1a/0x20 [ 134.025767] ? security_kernel_post_read_file+0xa2/0xd0 [ 134.028429] ? __sanitizer_cov_trace_const_cmp4+0x1a/0x20 [ 134.031162] ? kernel_read_file+0x503/0x820 [ 134.033645] ? __pfx_kernel_read_file+0x10/0x10 [ 134.036232] ? __pfx___lock_acquire+0x10/0x10 [ 134.038766] init_module_from_file+0x12c/0x1a0 [ 134.041291] ? init_module_from_file+0x12c/0x1a0 [ 134.043936] ? __pfx_init_module_from_file+0x10/0x10 [ 134.046516] ? __this_cpu_preempt_check+0x21/0x30 [ 134.049091] ? __kasan_check_read+0x15/0x20 [ 134.051551] ? do_raw_spin_unlock+0x60/0x210 [ 134.054077] idempotent_init_module+0x3f1/0x690 [ 134.056643] ? __pfx_idempotent_init_module+0x10/0x10 [ 134.059318] ? __sanitizer_cov_trace_const_cmp4+0x1a/0x20 [ 134.061995] ? __fget_light+0x17d/0x210 [ 134.064428] __x64_sys_finit_module+0x10e/0x1a0 [ 134.066976] x64_sys_call+0x184d/0x20d0 [ 134.069405] do_syscall_64+0x6d/0x140 [ 134.071926] entry_SYSCALL_64_after_hwframe+0x76/0x7e [[email protected]: add mutex_lock/unlock() pair back] Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Fixes: 823430c ("memory tier: consolidate the initialization of memory tiers") Signed-off-by: Yanfei Xu <[email protected]> Reviewed-by: "Huang, Ying" <[email protected]> Cc: Ho-Ren (Jack) Chuang <[email protected]> Cc: Jonathan Cameron <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

Patch series "zram: introduce custom comp backends API", v7. This series introduces support for run-time compression algorithms tuning, so users, for instance, can adjust compression/acceleration levels and provide pre-trained compression/decompression dictionaries which certain algorithms support. At this point we stop supporting (old/deprecated) comp API. We may add new acomp API support in the future, but before that zram needs to undergo some major rework (we are not ready for async compression). Some benchmarks for reference (look at column openbmc#2) *** init zstd /sys/block/zram0/mm_stat 1750659072 504622188 514355200 0 514355200 1 0 34204 34204 *** init zstd dict=/home/ss/zstd-dict-amd64 /sys/block/zram0/mm_stat 1750650880 465908890 475398144 0 475398144 1 0 34185 34185 *** init zstd level=8 dict=/home/ss/zstd-dict-amd64 /sys/block/zram0/mm_stat 1750654976 430803319 439873536 0 439873536 1 0 34185 34185 *** init lz4 /sys/block/zram0/mm_stat 1750646784 664266564 677060608 0 677060608 1 0 34288 34288 *** init lz4 dict=/home/ss/lz4-dict-amd64 /sys/block/zram0/mm_stat 1750650880 619990300 632102912 0 632102912 1 0 34278 34278 *** init lz4hc /sys/block/zram0/mm_stat 1750630400 609023822 621232128 0 621232128 1 0 34288 34288 *** init lz4hc dict=/home/ss/lz4-dict-amd64 /sys/block/zram0/mm_stat 1750659072 505133172 515231744 0 515231744 1 0 34278 34278 Recompress init zram zstd (prio=0), zstd level=5 (prio 1), zstd with dict (prio 2) *** zstd /sys/block/zram0/mm_stat 1750982656 504630584 514269184 0 514269184 1 0 34204 34204 *** idle recompress priority=1 (zstd level=5) /sys/block/zram0/mm_stat 1750982656 488645601 525438976 0 514269184 1 0 34204 34204 *** idle recompress priority=2 (zstd dict) /sys/block/zram0/mm_stat 1750982656 460869640 517914624 0 514269184 1 0 34185 34204 This patch (of 24): We need to export a number of API functions that enable advanced zstd usage - C/D dictionaries, dictionaries sharing between contexts, etc. Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Sergey Senozhatsky <[email protected]> Cc: Nick Terrell <[email protected]> Cc: Minchan Kim <[email protected]> Cc: Sergey Senozhatsky <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

Hou Tao says: ==================== The tiny patch set aims to fix two problems found during the development of supporting dynptr key in hash table. Patch openbmc#1 fixes the missed btf_record_free() when map creation fails and patch openbmc#2 fixes the missed kfree() when there is no special field in the passed btf. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>

Case openbmc#1: SQLite App GC Thread Kworker Shrinker - f2fs_ioc_start_atomic_write - f2fs_ioc_commit_atomic_write - f2fs_commit_atomic_write - filemap_write_and_wait_range : write atomic_file's data to cow_inode echo 3 > drop_caches to drop atomic_file's cache. - f2fs_gc - gc_data_segment - move_data_page - set_page_dirty - writepages - f2fs_do_write_data_page : overwrite atomic_file's data to cow_inode - f2fs_down_write(&fi->i_gc_rwsem[WRITE]) - __f2fs_commit_atomic_write - f2fs_up_write(&fi->i_gc_rwsem[WRITE]) Case openbmc#2: SQLite App GC Thread Kworker - f2fs_ioc_start_atomic_write - __writeback_single_inode - do_writepages - f2fs_write_cache_pages - f2fs_write_single_data_page - f2fs_do_write_data_page : write atomic_file's data to cow_inode - f2fs_gc - gc_data_segment - move_data_page - set_page_dirty - writepages - f2fs_do_write_data_page : overwrite atomic_file's data to cow_inode - f2fs_ioc_commit_atomic_write In above cases racing in between atomic_write and GC, previous data in atomic_file may be overwrited to cow_file, result in data corruption. This patch introduces PAGE_PRIVATE_ATOMIC_WRITE bit flag in page.private, and use it to indicate that there is last dirty data in atomic file, and the data should be writebacked into cow_file, if the flag is not tagged in page, we should never write data across files. Fixes: 3db1de0 ("f2fs: change the current atomic write way") Cc: Daeho Jeong <[email protected]> Signed-off-by: Chao Yu <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]>

…git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net v2: with kdoc fixes per Paolo Abeni. The following patchset contains Netfilter fixes for net: Patch openbmc#1 and openbmc#2 handle an esoteric scenario: Given two tasks sending UDP packets to one another, two packets of the same flow in each direction handled by different CPUs that result in two conntrack objects in NEW state, where reply packet loses race. Then, patch openbmc#3 adds a testcase for this scenario. Series from Florian Westphal. 1) NAT engine can falsely detect a port collision if it happens to pick up a reply packet as NEW rather than ESTABLISHED. Add extra code to detect this and suppress port reallocation in this case. 2) To complete the clash resolution in the reply direction, extend conntrack logic to detect clashing conntrack in the reply direction to existing entry. 3) Adds a test case. Then, an assorted list of fixes follow: 4) Add a selftest for tproxy, from Antonio Ojea. 5) Guard ctnetlink_*_size() functions under #if defined(CONFIG_NETFILTER_NETLINK_GLUE_CT) || defined(CONFIG_NF_CONNTRACK_EVENTS) From Andy Shevchenko. 6) Use -m socket --transparent in iptables tproxy documentation. From XIE Zhibang. 7) Call kfree_rcu() when releasing flowtable hooks to address race with netlink dump path, from Phil Sutter. 8) Fix compilation warning in nf_reject with CONFIG_BRIDGE_NETFILTER=n. From Simon Horman. 9) Guard ctnetlink_label_size() under CONFIG_NF_CONNTRACK_EVENTS which is its only user, to address a compilation warning. From Simon Horman. 10) Use rcu-protected list iteration over basechain hooks from netlink dump path. 11) Fix memcg for nf_tables, use GFP_KERNEL_ACCOUNT is not complete. 12) Remove old nfqueue conntrack clash resolution. Instead trying to use same destination address consistently which requires double DNAT, use the existing clash resolution which allows clashing packets go through with different destination. Antonio Ojea originally reported an issue from the postrouting chain, I proposed a fix: https://lore.kernel.org/netfilter-devel/ZuwSwAqKgCB2a51-@calendula/T/ which he reported it did not work for him. 13) Adds a selftest for patch 12. 14) Fixes ipvs.sh selftest. netfilter pull request 24-09-26 * tag 'nf-24-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: selftests: netfilter: Avoid hanging ipvs.sh kselftest: add test for nfqueue induced conntrack race netfilter: nfnetlink_queue: remove old clash resolution logic netfilter: nf_tables: missing objects with no memcg accounting netfilter: nf_tables: use rcu chain hook list iterator from netlink dump path netfilter: ctnetlink: compile ctnetlink_label_size with CONFIG_NF_CONNTRACK_EVENTS netfilter: nf_reject: Fix build warning when CONFIG_BRIDGE_NETFILTER=n netfilter: nf_tables: Keep deleted flowtable hooks until after RCU docs: tproxy: ignore non-transparent sockets in iptables netfilter: ctnetlink: Guard possible unused functions selftests: netfilter: nft_tproxy.sh: add tcp tests selftests: netfilter: add reverse-clash resolution test case netfilter: conntrack: add clash resolution for reverse collisions netfilter: nf_nat: don't try nat source port reallocation for reverse dir clash ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]>

The following calculation used in coalesced_mmio_has_room() to check whether the ring buffer is full is wrong and results in premature exits if the start of the valid entries is in the first half of the ring buffer. avail = (ring->first - last - 1) % KVM_COALESCED_MMIO_MAX; if (avail == 0) /* full */ Because negative values are handled using two's complement, and KVM computes the result as an unsigned value, the above will get a false positive if "first < last" and the ring is half-full. The above might have worked as expected in python for example: >>> (-86) % 170 84 However it doesn't work the same way in C. printf("avail: %d\n", (-86) % 170); printf("avail: %u\n", (-86) % 170); printf("avail: %u\n", (-86u) % 170u); Using gcc-11 these print: avail: -86 avail: 4294967210 avail: 0 For illustration purposes, given a 4-bit integer and a ring size of 0xA (unsigned), 0xA == 0x1010 == -6, and thus (-6u % 0xA) == 0. Fix the calculation and allow all but one entries in the buffer to be used as originally intended. Note, KVM's behavior is self-healing to some extent, as KVM will allow the entire buffer to be used if ring->first is beyond the halfway point. In other words, in the unlikely scenario that a use case benefits from being able to coalesce more than 86 entries at once, KVM will still provide such behavior, sometimes. Note openbmc#2, the % operator in C is not the modulo operator but the remainder operator. Modulo and remainder operators differ with respect to negative values. But, the relevant values in KVM are all unsigned, so it's a moot point in this case anyway. Note openbmc#3, this is almost a pure revert of the buggy commit, plus a READ_ONCE() to provide additional safety. Thue buggy commit justified the change with "it paves the way for making this function lockless", but it's not at all clear what was intended, nor is there any evidence that the buggy code was somehow safer. (a) the fields in question were already accessed locklessly, from the perspective that they could be modified by userspace at any time, and (b) the lock guarding the ring itself was changed, but never dropped, i.e. whatever lockless scheme (SRCU?) was planned never landed. Fixes: 105f8d4 ("KVM: Calculate available entries in coalesced mmio ring") Signed-off-by: Ilias Stamatis <[email protected]> Reviewed-by: Paul Durrant <[email protected]> Link: https://lore.kernel.org/r/[email protected] [sean: rework changelog to clarify behavior, call out weirdness of buggy commit] Signed-off-by: Sean Christopherson <[email protected]>

Use a dedicated mutex to guard kvm_usage_count to fix a potential deadlock on x86 due to a chain of locks and SRCU synchronizations. Translating the below lockdep splat, CPU1 openbmc#6 will wait on CPU0 openbmc#1, CPU0 openbmc#8 will wait on CPU2 openbmc#3, and CPU2 openbmc#7 will wait on CPU1 openbmc#4 (if there's a writer, due to the fairness of r/w semaphores). CPU0 CPU1 CPU2 1 lock(&kvm->slots_lock); 2 lock(&vcpu->mutex); 3 lock(&kvm->srcu); 4 lock(cpu_hotplug_lock); 5 lock(kvm_lock); 6 lock(&kvm->slots_lock); 7 lock(cpu_hotplug_lock); 8 sync(&kvm->srcu); Note, there are likely more potential deadlocks in KVM x86, e.g. the same pattern of taking cpu_hotplug_lock outside of kvm_lock likely exists with __kvmclock_cpufreq_notifier(): cpuhp_cpufreq_online() | -> cpufreq_online() | -> cpufreq_gov_performance_limits() | -> __cpufreq_driver_target() | -> __target_index() | -> cpufreq_freq_transition_begin() | -> cpufreq_notify_transition() | -> ... __kvmclock_cpufreq_notifier() But, actually triggering such deadlocks is beyond rare due to the combination of dependencies and timings involved. E.g. the cpufreq notifier is only used on older CPUs without a constant TSC, mucking with the NX hugepage mitigation while VMs are running is very uncommon, and doing so while also onlining/offlining a CPU (necessary to generate contention on cpu_hotplug_lock) would be even more unusual. The most robust solution to the general cpu_hotplug_lock issue is likely to switch vm_list to be an RCU-protected list, e.g. so that x86's cpufreq notifier doesn't to take kvm_lock. For now, settle for fixing the most blatant deadlock, as switching to an RCU-protected list is a much more involved change, but add a comment in locking.rst to call out that care needs to be taken when walking holding kvm_lock and walking vm_list. ====================================================== WARNING: possible circular locking dependency detected 6.10.0-smp--c257535a0c9d-pip torvalds#330 Tainted: G S O ------------------------------------------------------ tee/35048 is trying to acquire lock: ff6a80eced71e0a8 (&kvm->slots_lock){+.+.}-{3:3}, at: set_nx_huge_pages+0x179/0x1e0 [kvm] but task is already holding lock: ffffffffc07abb08 (kvm_lock){+.+.}-{3:3}, at: set_nx_huge_pages+0x14a/0x1e0 [kvm] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> openbmc#3 (kvm_lock){+.+.}-{3:3}: __mutex_lock+0x6a/0xb40 mutex_lock_nested+0x1f/0x30 kvm_dev_ioctl+0x4fb/0xe50 [kvm] __se_sys_ioctl+0x7b/0xd0 __x64_sys_ioctl+0x21/0x30 x64_sys_call+0x15d0/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> openbmc#2 (cpu_hotplug_lock){++++}-{0:0}: cpus_read_lock+0x2e/0xb0 static_key_slow_inc+0x16/0x30 kvm_lapic_set_base+0x6a/0x1c0 [kvm] kvm_set_apic_base+0x8f/0xe0 [kvm] kvm_set_msr_common+0x9ae/0xf80 [kvm] vmx_set_msr+0xa54/0xbe0 [kvm_intel] __kvm_set_msr+0xb6/0x1a0 [kvm] kvm_arch_vcpu_ioctl+0xeca/0x10c0 [kvm] kvm_vcpu_ioctl+0x485/0x5b0 [kvm] __se_sys_ioctl+0x7b/0xd0 __x64_sys_ioctl+0x21/0x30 x64_sys_call+0x15d0/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> openbmc#1 (&kvm->srcu){.+.+}-{0:0}: __synchronize_srcu+0x44/0x1a0 synchronize_srcu_expedited+0x21/0x30 kvm_swap_active_memslots+0x110/0x1c0 [kvm] kvm_set_memslot+0x360/0x620 [kvm] __kvm_set_memory_region+0x27b/0x300 [kvm] kvm_vm_ioctl_set_memory_region+0x43/0x60 [kvm] kvm_vm_ioctl+0x295/0x650 [kvm] __se_sys_ioctl+0x7b/0xd0 __x64_sys_ioctl+0x21/0x30 x64_sys_call+0x15d0/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #0 (&kvm->slots_lock){+.+.}-{3:3}: __lock_acquire+0x15ef/0x2e30 lock_acquire+0xe0/0x260 __mutex_lock+0x6a/0xb40 mutex_lock_nested+0x1f/0x30 set_nx_huge_pages+0x179/0x1e0 [kvm] param_attr_store+0x93/0x100 module_attr_store+0x22/0x40 sysfs_kf_write+0x81/0xb0 kernfs_fop_write_iter+0x133/0x1d0 vfs_write+0x28d/0x380 ksys_write+0x70/0xe0 __x64_sys_write+0x1f/0x30 x64_sys_call+0x281b/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e Cc: Chao Gao <[email protected]> Fixes: 0bf5049 ("KVM: Drop kvm_count_lock and instead protect kvm_usage_count with kvm_lock") Cc: [email protected] Reviewed-by: Kai Huang <[email protected]> Acked-by: Kai Huang <[email protected]> Tested-by: Farrah Chen <[email protected]> Signed-off-by: Sean Christopherson <[email protected]> Message-ID: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>

[ Upstream commit 1a0bd28 ] Case #1: SQLite App GC Thread Kworker Shrinker - f2fs_ioc_start_atomic_write - f2fs_ioc_commit_atomic_write - f2fs_commit_atomic_write - filemap_write_and_wait_range : write atomic_file's data to cow_inode echo 3 > drop_caches to drop atomic_file's cache. - f2fs_gc - gc_data_segment - move_data_page - set_page_dirty - writepages - f2fs_do_write_data_page : overwrite atomic_file's data to cow_inode - f2fs_down_write(&fi->i_gc_rwsem[WRITE]) - __f2fs_commit_atomic_write - f2fs_up_write(&fi->i_gc_rwsem[WRITE]) Case #2: SQLite App GC Thread Kworker - f2fs_ioc_start_atomic_write - __writeback_single_inode - do_writepages - f2fs_write_cache_pages - f2fs_write_single_data_page - f2fs_do_write_data_page : write atomic_file's data to cow_inode - f2fs_gc - gc_data_segment - move_data_page - set_page_dirty - writepages - f2fs_do_write_data_page : overwrite atomic_file's data to cow_inode - f2fs_ioc_commit_atomic_write In above cases racing in between atomic_write and GC, previous data in atomic_file may be overwrited to cow_file, result in data corruption. This patch introduces PAGE_PRIVATE_ATOMIC_WRITE bit flag in page.private, and use it to indicate that there is last dirty data in atomic file, and the data should be writebacked into cow_file, if the flag is not tagged in page, we should never write data across files. Fixes: 3db1de0 ("f2fs: change the current atomic write way") Cc: Daeho Jeong <[email protected]> Signed-off-by: Chao Yu <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 44d1745 upstream. Use a dedicated mutex to guard kvm_usage_count to fix a potential deadlock on x86 due to a chain of locks and SRCU synchronizations. Translating the below lockdep splat, CPU1 #6 will wait on CPU0 #1, CPU0 #8 will wait on CPU2 #3, and CPU2 #7 will wait on CPU1 #4 (if there's a writer, due to the fairness of r/w semaphores). CPU0 CPU1 CPU2 1 lock(&kvm->slots_lock); 2 lock(&vcpu->mutex); 3 lock(&kvm->srcu); 4 lock(cpu_hotplug_lock); 5 lock(kvm_lock); 6 lock(&kvm->slots_lock); 7 lock(cpu_hotplug_lock); 8 sync(&kvm->srcu); Note, there are likely more potential deadlocks in KVM x86, e.g. the same pattern of taking cpu_hotplug_lock outside of kvm_lock likely exists with __kvmclock_cpufreq_notifier(): cpuhp_cpufreq_online() | -> cpufreq_online() | -> cpufreq_gov_performance_limits() | -> __cpufreq_driver_target() | -> __target_index() | -> cpufreq_freq_transition_begin() | -> cpufreq_notify_transition() | -> ... __kvmclock_cpufreq_notifier() But, actually triggering such deadlocks is beyond rare due to the combination of dependencies and timings involved. E.g. the cpufreq notifier is only used on older CPUs without a constant TSC, mucking with the NX hugepage mitigation while VMs are running is very uncommon, and doing so while also onlining/offlining a CPU (necessary to generate contention on cpu_hotplug_lock) would be even more unusual. The most robust solution to the general cpu_hotplug_lock issue is likely to switch vm_list to be an RCU-protected list, e.g. so that x86's cpufreq notifier doesn't to take kvm_lock. For now, settle for fixing the most blatant deadlock, as switching to an RCU-protected list is a much more involved change, but add a comment in locking.rst to call out that care needs to be taken when walking holding kvm_lock and walking vm_list. ====================================================== WARNING: possible circular locking dependency detected 6.10.0-smp--c257535a0c9d-pip torvalds#330 Tainted: G S O ------------------------------------------------------ tee/35048 is trying to acquire lock: ff6a80eced71e0a8 (&kvm->slots_lock){+.+.}-{3:3}, at: set_nx_huge_pages+0x179/0x1e0 [kvm] but task is already holding lock: ffffffffc07abb08 (kvm_lock){+.+.}-{3:3}, at: set_nx_huge_pages+0x14a/0x1e0 [kvm] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (kvm_lock){+.+.}-{3:3}: __mutex_lock+0x6a/0xb40 mutex_lock_nested+0x1f/0x30 kvm_dev_ioctl+0x4fb/0xe50 [kvm] __se_sys_ioctl+0x7b/0xd0 __x64_sys_ioctl+0x21/0x30 x64_sys_call+0x15d0/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #2 (cpu_hotplug_lock){++++}-{0:0}: cpus_read_lock+0x2e/0xb0 static_key_slow_inc+0x16/0x30 kvm_lapic_set_base+0x6a/0x1c0 [kvm] kvm_set_apic_base+0x8f/0xe0 [kvm] kvm_set_msr_common+0x9ae/0xf80 [kvm] vmx_set_msr+0xa54/0xbe0 [kvm_intel] __kvm_set_msr+0xb6/0x1a0 [kvm] kvm_arch_vcpu_ioctl+0xeca/0x10c0 [kvm] kvm_vcpu_ioctl+0x485/0x5b0 [kvm] __se_sys_ioctl+0x7b/0xd0 __x64_sys_ioctl+0x21/0x30 x64_sys_call+0x15d0/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #1 (&kvm->srcu){.+.+}-{0:0}: __synchronize_srcu+0x44/0x1a0 synchronize_srcu_expedited+0x21/0x30 kvm_swap_active_memslots+0x110/0x1c0 [kvm] kvm_set_memslot+0x360/0x620 [kvm] __kvm_set_memory_region+0x27b/0x300 [kvm] kvm_vm_ioctl_set_memory_region+0x43/0x60 [kvm] kvm_vm_ioctl+0x295/0x650 [kvm] __se_sys_ioctl+0x7b/0xd0 __x64_sys_ioctl+0x21/0x30 x64_sys_call+0x15d0/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #0 (&kvm->slots_lock){+.+.}-{3:3}: __lock_acquire+0x15ef/0x2e30 lock_acquire+0xe0/0x260 __mutex_lock+0x6a/0xb40 mutex_lock_nested+0x1f/0x30 set_nx_huge_pages+0x179/0x1e0 [kvm] param_attr_store+0x93/0x100 module_attr_store+0x22/0x40 sysfs_kf_write+0x81/0xb0 kernfs_fop_write_iter+0x133/0x1d0 vfs_write+0x28d/0x380 ksys_write+0x70/0xe0 __x64_sys_write+0x1f/0x30 x64_sys_call+0x281b/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e Cc: Chao Gao <[email protected]> Fixes: 0bf5049 ("KVM: Drop kvm_count_lock and instead protect kvm_usage_count with kvm_lock") Cc: [email protected] Reviewed-by: Kai Huang <[email protected]> Acked-by: Kai Huang <[email protected]> Tested-by: Farrah Chen <[email protected]> Signed-off-by: Sean Christopherson <[email protected]> Message-ID: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit f0b94c1 upstream. With the current bandwidth allocation we end up reserving too much for the USB 3.x and PCIe tunnels that leads to reduced capabilities for the second DisplayPort tunnel. Fix this by decreasing the USB 3.x allocation to 900 Mb/s which then allows both tunnels to get the maximum HBR2 bandwidth. This way, the reserved bandwidth for USB 3.x and PCIe, would be 1350 Mb/s (taking weights of USB 3.x and PCIe into account). So bandwidth allocations on a link are: USB 3.x + PCIe tunnels => 1350 Mb/s DisplayPort tunnel #1 => 17280 Mb/s DisplayPort tunnel #2 => 17280 Mb/s Total consumed bandwidth is 35910 Mb/s. So that all the above can be tunneled on a Gen 3 link (which allows maximum of 36000 Mb/s). Fixes: 582e70b ("thunderbolt: Change bandwidth reservations to comply USB4 v2") Signed-off-by: Gil Fine <[email protected]> Signed-off-by: Mika Westerberg <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit ac01c8c upstream. AddressSanitizer found a use-after-free bug in the symbol code which manifested as 'perf top' segfaulting. ==1238389==ERROR: AddressSanitizer: heap-use-after-free on address 0x60b00c48844b at pc 0x5650d8035961 bp 0x7f751aaecc90 sp 0x7f751aaecc80 READ of size 1 at 0x60b00c48844b thread T193 #0 0x5650d8035960 in _sort__sym_cmp util/sort.c:310 #1 0x5650d8043744 in hist_entry__cmp util/hist.c:1286 #2 0x5650d8043951 in hists__findnew_entry util/hist.c:614 #3 0x5650d804568f in __hists__add_entry util/hist.c:754 #4 0x5650d8045bf9 in hists__add_entry util/hist.c:772 #5 0x5650d8045df1 in iter_add_single_normal_entry util/hist.c:997 #6 0x5650d8043326 in hist_entry_iter__add util/hist.c:1242 #7 0x5650d7ceeefe in perf_event__process_sample /home/matt/src/linux/tools/perf/builtin-top.c:845 #8 0x5650d7ceeefe in deliver_event /home/matt/src/linux/tools/perf/builtin-top.c:1208 #9 0x5650d7fdb51b in do_flush util/ordered-events.c:245 #10 0x5650d7fdb51b in __ordered_events__flush util/ordered-events.c:324 #11 0x5650d7ced743 in process_thread /home/matt/src/linux/tools/perf/builtin-top.c:1120 #12 0x7f757ef1f133 in start_thread nptl/pthread_create.c:442 #13 0x7f757ef9f7db in clone3 ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81 When updating hist maps it's also necessary to update the hist symbol reference because the old one gets freed in map__put(). While this bug was probably introduced with 5c24b67 ("perf tools: Replace map->referenced & maps->removed_maps with map->refcnt"), the symbol objects were leaked until c087e94 ("perf machine: Fix refcount usage when processing PERF_RECORD_KSYMBOL") was merged so the bug was masked. Fixes: c087e94 ("perf machine: Fix refcount usage when processing PERF_RECORD_KSYMBOL") Reported-by: Yunzhao Li <[email protected]> Signed-off-by: Matt Fleming (Cloudflare) <[email protected]> Cc: Ian Rogers <[email protected]> Cc: [email protected] Cc: Namhyung Kim <[email protected]> Cc: Riccardo Mancini <[email protected]> Cc: [email protected] # v5.13+ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 9af2efe upstream. The fields in the hist_entry are filled on-demand which means they only have meaningful values when relevant sort keys are used. So if neither of 'dso' nor 'sym' sort keys are used, the map/symbols in the hist entry can be garbage. So it shouldn't access it unconditionally. I got a segfault, when I wanted to see cgroup profiles. $ sudo perf record -a --all-cgroups --synth=cgroup true $ sudo perf report -s cgroup Program received signal SIGSEGV, Segmentation fault. 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 48 return RC_CHK_ACCESS(map)->dso; (gdb) bt #0 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 #1 0x00005555557aa39b in map__load (map=0x0) at util/map.c:344 #2 0x00005555557aa592 in map__find_symbol (map=0x0, addr=140736115941088) at util/map.c:385 #3 0x00005555557ef000 in hists__findnew_entry (hists=0x555556039d60, entry=0x7fffffffa4c0, al=0x7fffffffa8c0, sample_self=true) at util/hist.c:644 #4 0x00005555557ef61c in __hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, block_info=0x0, sample=0x7fffffffaa90, sample_self=true, ops=0x0) at util/hist.c:761 #5 0x00005555557ef71f in hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, sample=0x7fffffffaa90, sample_self=true) at util/hist.c:779 #6 0x00005555557f00fb in iter_add_single_normal_entry (iter=0x7fffffffa900, al=0x7fffffffa8c0) at util/hist.c:1015 #7 0x00005555557f09a7 in hist_entry_iter__add (iter=0x7fffffffa900, al=0x7fffffffa8c0, max_stack_depth=127, arg=0x7fffffffbce0) at util/hist.c:1260 #8 0x00005555555ba7ce in process_sample_event (tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at builtin-report.c:334 #9 0x00005555557b30c8 in evlist__deliver_sample (evlist=0x555556039010, tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at util/session.c:1232 #10 0x00005555557b32bc in machines__deliver_event (machines=0x5555560388e8, evlist=0x555556039010, event=0x7ffff7c14128, sample=0x7fffffffaa90, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1271 #11 0x00005555557b3848 in perf_session__deliver_event (session=0x5555560386d0, event=0x7ffff7c14128, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1354 #12 0x00005555557affaf in ordered_events__deliver_event (oe=0x555556038e60, event=0x555556135aa0) at util/session.c:132 #13 0x00005555557bb605 in do_flush (oe=0x555556038e60, show_progress=false) at util/ordered-events.c:245 #14 0x00005555557bb95c in __ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND, timestamp=0) at util/ordered-events.c:324 #15 0x00005555557bba46 in ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND) at util/ordered-events.c:342 #16 0x00005555557b1b3b in perf_event__process_finished_round (tool=0x7fffffffbce0, event=0x7ffff7c15bb8, oe=0x555556038e60) at util/session.c:780 #17 0x00005555557b3b27 in perf_session__process_user_event (session=0x5555560386d0, event=0x7ffff7c15bb8, file_offset=117688, file_path=0x555556038ff0 "perf.data") at util/session.c:1406 As you can see the entry->ms.map was NULL even if he->ms.map has a value. This is because 'sym' sort key is not given, so it cannot assume whether he->ms.sym and entry->ms.sym is the same. I only checked the 'sym' sort key here as it implies 'dso' behavior (so maps are the same). Fixes: ac01c8c ("perf hist: Update hist symbol when updating maps") Signed-off-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Matt Fleming <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 169410e ] These three bpf_map_{lookup,update,delete}_elem() helpers are also available for sleepable bpf program, so add the corresponding lock assertion for sleepable bpf program, otherwise the following warning will be reported when a sleepable bpf program manipulates bpf map under interpreter mode (aka bpf_jit_enable=0): WARNING: CPU: 3 PID: 4985 at kernel/bpf/helpers.c:40 ...... CPU: 3 PID: 4985 Comm: test_progs Not tainted 6.6.0+ openbmc#2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) ...... RIP: 0010:bpf_map_lookup_elem+0x54/0x60 ...... Call Trace: <TASK> ? __warn+0xa5/0x240 ? bpf_map_lookup_elem+0x54/0x60 ? report_bug+0x1ba/0x1f0 ? handle_bug+0x40/0x80 ? exc_invalid_op+0x18/0x50 ? asm_exc_invalid_op+0x1b/0x20 ? __pfx_bpf_map_lookup_elem+0x10/0x10 ? rcu_lockdep_current_cpu_online+0x65/0xb0 ? rcu_is_watching+0x23/0x50 ? bpf_map_lookup_elem+0x54/0x60 ? __pfx_bpf_map_lookup_elem+0x10/0x10 ___bpf_prog_run+0x513/0x3b70 __bpf_prog_run32+0x9d/0xd0 ? __bpf_prog_enter_sleepable_recur+0xad/0x120 ? __bpf_prog_enter_sleepable_recur+0x3e/0x120 bpf_trampoline_6442580665+0x4d/0x1000 __x64_sys_getpgid+0x5/0x30 ? do_syscall_64+0x36/0xb0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 </TASK> Signed-off-by: Hou Tao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

arm/aspeed_defconfig: Add required options to boot with systemd

b37ac72

apopple added a commit that referenced this pull request Oct 13, 2015

Merge pull request #2 from cyrilbur-ibm/openbmc-dev

abab3a8

arm/aspeed_defconfig: Add required options to boot with systemd

apopple merged commit abab3a8 into openbmc:dev Oct 13, 2015

shenki reviewed Oct 13, 2015
View reviewed changes

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

arm/aspeed_defconfig: Add required options to boot with systemd #2

arm/aspeed_defconfig: Add required options to boot with systemd #2

cyrilbur-ibm commented Oct 13, 2015

shenki Oct 13, 2015

apopple Oct 13, 2015

shenki Oct 13, 2015

arm/aspeed_defconfig: Add required options to boot with systemd #2

arm/aspeed_defconfig: Add required options to boot with systemd #2

Conversation

cyrilbur-ibm commented Oct 13, 2015

shenki Oct 13, 2015

Choose a reason for hiding this comment

apopple Oct 13, 2015

Choose a reason for hiding this comment

shenki Oct 13, 2015

Choose a reason for hiding this comment