feat(core): carve against every voice over a bed, always by vanceingalls · Pull Request #3212 · heygen-com/hyperframes

vanceingalls · 2026-08-11T08:37:00Z

Carve against every voice over a bed, always — not just the one the author happened to pick.

A bed usually runs under a whole sequence: a narrator, an answer, a second presenter. They are analysed together, so the cuts follow whoever is speaking, which makes the source a set of tracks to include rather than a choice between them.

🤖 Generated with Claude Code

miga-heygen

Clean design — summing voices then feeding one combined signal to the existing analysis pipeline avoids spreading multi-voice awareness through the whole stack. Backward compat migration in normalizeCarveSettings handles the source → sources and dynamic removal correctly.

Two items worth addressing:

1. clipsOverlap has zero test coverage. The function is exported, has non-trivial logic (unbounded-duration via POSITIVE_INFINITY, half-open interval comparison), and gates whether a voice enters a carve. Negative duration produces an inverted interval where end < start:

a = {start: 10, duration: -5}  →  end = 5
b = {start: 3, duration: 10}   →  end = 13
a.start < end(b) = true, b.start < end(a) = true → overlap detected

...for an interval that doesn't exist. Add a describe("clipsOverlap") block covering: normal overlap, no overlap, adjacent clips, null/undefined duration, zero duration, and negative duration. Guard or clamp negative duration if the contract disallows it.

2. \b word-boundary regex misses underscore-separated names. \b treats _ as a word character, so \bbed\b does NOT match bed_01, my_bed, or music_bed_loop. Same for \bvo\b, \bvox\b, \bsong\b. A music bed named bed_01 classifies as "unknown" and couldBeCarveSource("bed_01") returns true — the bed could end up in its own carve source list. Replace \b with a separator-aware pattern that treats _ and - as boundaries.

Non-blocking:

mixCarveSources output can exceed [-1, 1] (summing). Correct if downstream handles unnormalized input, but worth a comment confirming.
Stale comment at line ~222 references dynamic which no longer exists in DEFAULT_CARVE.
normalizeCarveSettings null guard (raw === null) is untested and not reachable through the type signature. Either test the defensive path or drop the check.
Empty-samples voice allocates a zero-filled buffer in the reduce — a continue on samples.length === 0 is tidier.

Tests for mixCarveSources (offset placement, gap silence, overlap summing, negative-offset clipping) and backward compat are strong.

Review by Miga

A bed usually runs under a whole sequence — a narrator, an interview answer, a second presenter — and carving against one of them left the others fighting it. `source` becomes `sources`, and `mixCarveSources` sums every voice onto the BED's clock before anything is measured. That is what keeps one analysis sufficient: the chain is fixed, so there is no per-voice filter to switch between, and bands drawn from all the speech there is with envelopes that rise wherever any of it happens answer the actual question — where and when is speech masking this bed. Summed rather than averaged: two people talking at once mask more than either alone. Audio before the bed starts is dropped rather than folded in at zero, since it plays over nothing and shifting it would put a cut where there is no voice. `dynamic` is gone. A fixed depth thins the bed through every pause, and once both have been heard there is no reason to want it, so every carve follows the speech. Two helpers the panel and the headless script now share instead of each carrying a copy — two definitions of "what does this name suggest" drift, and then the two disagree about which track is the voice: - `classifyAudioName` reads a track's kind from its id and filename together. `unknown` is deliberately common: treating an unrecognised name as "not a voice" would hide the one track somebody needs to pick. - `clipsOverlap` keeps out a voice that never plays while the bed does. An unwritten duration counts as unbounded, not zero — refusing a clip whose length the composition leaves to the media would drop the commonest case there is. Files written before this still load: a single `source` reads as a one-voice list, a stored `dynamic` is ignored, and an absent attribute means the defaults whole. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>

#3212 (accidentally squash-merged into this branch instead of main) changed HfCarveSettings from a single `source` + `dynamic` toggle to a `sources` list with dynamic mode removed outright — the multi-voice UI consumer that goes with that shape lands in the very next PR, so this branch was left with a type that no longer matched its own code. Minimal port, not the multi-voice redesign that PR does properly: the "Listen to" picker and analyse() treat sources[0] as the one voice this UI still understands, and every dynamic-mode branch (the automated envelope lanes, the toggle, the checkbox) is gone along with the field — a carve is now always the static value the analysis computes, matching what the type change made permanent. Test suite trimmed the same way: the automation-lane and toggle tests covered behavior that no longer exists.

…ile (#3211) * feat(studio): show every automated knob at the playhead, and carve as one module An automated parameter has two values: the number sitting in the chain, which is only the seed a lane replaced, and the number the envelope is on right now. The second is the true one, so the panel shows it — on the carve rack's readouts and on every effect's own fader and number field. A rack that showed the seed stood still while the carve was audibly working. Off the clip it keeps sampling rather than falling back to the stored number: a lane holds its first value backwards and its last forwards, so before the clip starts it already knows what it will open on, and the stored seed is a value nothing will ever play. Showing it made the fader jump the moment the clip came under the playhead. The playhead comes off the liveTime channel, throttled to 30 Hz — the RAF loop deliberately keeps frames out of the store, so a panel watching only the store would sit still for a whole take. PropertyPanel had that subscription inline; it is now one shared hook with two callers. Readouts reserve the width their parameter can need rather than what its current value takes, because an updating value one character narrower shunted everything after it sideways 30 times a second. The carve's effects are presented as one module: an author switched on a carve, and the peaking filters plus the level stage are how it is built, not six things to remove one at a time. Opening it lists every member's settings as readouts, since strength is what sets them. No carve control is offered on a track another track already carves against — that track is the voice, not the bed. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(studio-server): key the waveform cache on the file, not just its path Two takes written to the same path returned the first one's waveform, so a re-recorded track drew the shape of the audio it replaced. The key now carries size and mtime, which is enough to notice the bytes changed. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * feat(engine): render audio FX in an OfflineAudioContext Reads `data-fx-chain` off an audio element and runs the chain over the trimmed WAV before volume automation is baked in — effects should see the raw signal, and the envelope belongs on their output. The processing happens in an OfflineAudioContext inside the headless browser the engine already drives, running the same graph builders the studio previews with. That is the point of the approach: one implementation per effect, so the render agreeing with the preview is a property of the architecture rather than a tolerance to police. Reimplementing each effect as an FFmpeg filter would mean two implementations to keep in step, and for the dynamics processors and modulated delays there is no filter that behaves the same way. `build:audio-fx-runtime` bundles the graph builders into an injectable IIFE, following the same pattern as the existing runtime artifacts, so the browser runs exactly the code the studio does. The page loads from a file:// URL rather than about:blank because AudioWorklet is only exposed in a secure context — the compressor, limiter, gate and bitcrush processors would otherwise fail to register with an opaque error. file:// qualifies and needs no listening socket. The chain is serialised into the attribute the way colour grading carries its config, so there is no side-car file to resolve or lose. An FX failure is fatal for the whole mix rather than a per-track soft failure. Every other audio failure mode degrades gracefully — the track drops, siblings continue — but substituting the dry signal for a processed one ships a render that sounds plausible and is not what the author set up. Since the per-element work races under Promise.all, an internal AbortController chained off the caller's signal aborts in-flight siblings before workDir is removed. * feat(core): voiceover carve analysis Finds the bands a voice occupies so a music bed can be dipped there, letting the voice sit in front without ducking the whole track. Carve is a relationship between two tracks rather than an effect on one, so it stays out of the FX chain. What it emits is an ordinary chain of peaking filters, so a carve composes with whatever else is on the track and needs no separate rendering path. Selection is weighted toward intelligibility rather than raw voice energy. Ranking purely by power lands on the fundamental almost every time, because that is where a voice is loudest — but the masking that actually hurts a voiceover happens higher up, and dipping 160 Hz mostly just thins the bed. The bias is a control, not a constant: at 0 it follows raw energy, at 1 it weights toward 1-3 kHz. Ranking happens in dB, which matters more than it looks. Speech spreads 20-30 dB across these bands — it falls off roughly 6 dB per octave above the fundamental — so a weighting has to be on that scale to move anything at all. A multiplicative weight of `1 - bias + bias * shaped` is bounded below by `1 - bias`, capping its influence at 10*log10(1/(1 - bias)): 5.2 dB at the 0.7 default, 3 dB at 0.5. That is no influence against a real voice — every bias short of ~0.95 would rank exactly like bias 0 and carve the fundamental, the outcome the bias exists to prevent, while looking decisive against a fixture whose bands sit 2 dB apart. So the bias is a dB penalty, zero at 2 kHz and worth up to 30 dB at full strength, and relative cut depths come from a dB difference rather than a ratio of weighted linear powers. The bias reweights ranking without overriding the spectrum — a band the voice has no energy in is not worth carving, and scores -Infinity rather than competing — so a strongly low-pitched voice can still select low at full bias. What the tests hold is that biasing never selects lower than the unbiased ranking, that the DEFAULT bias reaches the presence region on a voice with a realistic tilt, and that bias 0 still follows raw power exactly. Includes a radix-2 FFT rather than a dependency; one Welch-style averaged spectrum over third-octave bands does not justify pulling in a DSP library. * fix(engine): keep the FX render 16-bit, stereo, and correctly sized Three defects in the offline FX path, none of which any test could see. **Float output silently disabled sample-accurate volume automation.** The writer emitted 32-bit IEEE float; the very next mixer step bakes the volume envelope into the samples and accepts only 16-bit PCM, returning null otherwise. So enabling any effect downgraded that track to the ffmpeg expression path — capped at 32 straight segments, quantising a curved envelope, and on a dense one falling back to base volume. It now writes 16-bit PCM, clamped rather than wrapped so a limiter at 0 dB or a resonant filter cannot turn overshoot into a click. A test asserts the baker accepts the writer's own output and actually fades it. **Everything was folded to mono.** `prepareAudioTrack` goes out of its way to emit stereo — its pan filter exists to dodge ffmpeg's 3 dB mono-to-stereo rematrix — and this folded it, then wrote one channel. So adding a single peaking EQ collapsed a bed's width and cost ~3 dB in the render, while preview stayed stereo. Channels now travel as one plane each, through an OfflineAudioContext of the same width, and come back interleaved. **Small results decoded the wrong length.** `new Float32Array(buf.buffer)` discards byteOffset and byteLength, and Node pools small allocations: a 400-byte payload sits at offset 8 inside an 8 KiB pool, so a clip under ~1024 samples decoded as 2048 samples of unrelated memory — and the empty-result guard could not see it. The reader has the mirror-image fix: a float data chunk on an odd boundary (ffmpeg's pcm_f32le writes fmt(18) + fact, landing `data` at 58) now copies instead of throwing RangeError on an unaligned view. The tail limitation is now stated rather than mis-stated: the context is exactly as long as the input, so a reverb or delay still ringing is cut there. The old comment claimed the opposite. How far a tail may run past a clip's end changes the clip's length in the mix, so it is a product decision, not one to make here. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(producer): report an FX render failure as an audio error `processCompositionAudio` reports per-track failures in its result, but an FX failure it cannot degrade past — a browser that will not launch, a chain that will not build — rejects instead. `runAudioStage` had no try, so that rejection escaped to the orchestrator as an unclassified pipeline exception, losing the stage/owner/retryable classification this stage exists to attach, and skipping its abort check on the way out. It now lands in `audioError` alongside every other cause, while an abort still keeps its own shape rather than being reported as an audio problem. Not done here: committing the generated `audio-fx-runtime-inline.ts` so a fresh clone typechecks packages/engine without building first. The bundle is built from the stub, and the stub changes three times across this stack — so the artifact differs per branch and would conflict on every restack. Its model, position-edits-render-inline.ts, is committed only because it is stable. Building before testing is this monorepo's existing contract (studio's tests need core's dist too), so the gap is not specific to audio FX and is better closed by a build ordering gate than by committing a per-branch artifact. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * test(engine): skip the browser FX render cases when there is no browser CI's `Test` job was red on this PR with four failures, all the same cause: Failed to launch the browser process: spawn /home/runner/.cache/hyperframes/chrome/chrome-headless-shell The job installs ffmpeg and no browser, deliberately — every other suite that needs an external binary already guards on it (`describe.skipIf(!HAS_FFMPEG)`). These cases were the only ones assuming a Chrome, so they failed on an absent dependency rather than on anything about the code. Guards on `resolveHeadlessShellPath()` — the same resolver `acquireBrowser` launches through, so the check cannot drift from the thing it guards the way a hard-coded cache path would. A configured path that does not exist throws; that is caught and read as "cannot run here". Checked both directions rather than just the green one: with a browser all 11 cases run and pass, and with `HYPERFRAMES_BROWSER_PATH` pointed at a missing binary exactly 3 skip and the other 8 still run. A guard that silently skipped everything would have looked identical in CI. They keep their value where it exists — every developer machine, and any job that has run `hyperframes browser ensure`. Not touched: the CodeQL failure on this PR is a run from 2026-08-07, five days and several force-pushes stale. None of the 17 open repo alerts are in files this PR changes; it re-runs on this push. * chore(engine): suppress the temp-file alert with the reason it is safe CodeQL flags `writeWav`'s `writeFileSync` as js/insecure-temporary-file (high) — the one new alert on #3021, and the reason its CodeQL check is red. It is a false positive, and the comment says why rather than just silencing it: `path` is always inside a directory made by `mkdtempSync`, never a name assembled directly under `tmpdir()`. Both callers are covered — the browser host page writes into `mkdtempSync(join(tmpdir(), "hf-fx-host-"))`, and the render output goes to the producer work dir, itself `mkdtempSync(join(tempRoot, "producer-project-"))`. mkdtemp picks the random suffix and creates the directory 0700 in one syscall, so the predictable filename inside it cannot be pre-created or symlinked by another user, which is the attack the rule is about. The analyzer sees the dataflow reach `tmpdir()` and not the mkdtemp in between. Suppressed inline rather than dismissed in the UI, so the justification lives next to the code and the rule stays live for anything added later in this file. Matches the repo's existing convention — `planV2.ts:222` carries an `lgtm[js/insecure-temporary-file]` for a different reason on the same rule. Correcting myself: I first reported this alert as not real, having intersected the PR's files against the default-branch alert list, which does not contain PR-ref alerts. Querying ?ref=refs/pull/3021/merge returns it straight away. * test(engine): probe ffmpeg and Chrome instead of assuming them Two failures on #3021's Test job, both about the environment rather than the code under test. **Bare `ffmpeg` is not on PATH in CI.** The 16-bit fixture shelled out to `execFileSync("ffmpeg", ...)` and died with ENOENT. The job does provide ffmpeg, through `prepare-ffmpeg-bin`, which is what `getFfmpegBinary()` resolves — every other ffmpeg-dependent suite in this package already goes through it. Now this one does too, and the case is `skipIf(!HAS_FFMPEG)` so a contributor without ffmpeg skips rather than fails. **The browser guard trusted the wrong thing.** It asked `resolveHeadlessShellPath()` and treated a returned path as "a browser is here". CI's cache holds a chrome-headless-shell that resolves and then fails to spawn — a partial download is indistinguishable from a working one by `existsSync`, which is all that resolver checks. So the three browser cases ran anyway and failed on the launch. It now runs `--version` and requires exit 0, which is the same probe the ffmpeg suites use: ask the binary, do not infer from the filesystem. Checked both directions rather than just the green one. With a working browser all 11 cases run and pass; with `HYPERFRAMES_BROWSER_PATH` pointed at a binary that exits non-zero — CI's exact situation — exactly 3 skip and the other 8 still run. A guard that quietly skipped everything would have looked identical on the CI summary. * feat(core): register the audio-fx-rack canary at 0% Lands the rollout switch dark, per the registry's own procedure: "Start at percentage: 0 and merge that — a canary at 0 is dead code you can land safely and ramp without a code review." Declared at the bottom of the stack so every branch above can read it. The gate itself goes in at wa-4-fx-panel, where the rack first appears. Scope is deliberate and stated in the description: it gates the AUTHORING surface only. A composition that already carries `data-fx-chain` still plays and renders it. A canary should stage who can REACH a feature, not make an attribute somebody already wrote silently inert — an agent that writes a chain through the skill would otherwise produce a file whose audio processing vanishes with no error. * feat(studio): audio FX panel generated from the registry Controls for the whole chain: add, remove, reorder, bypass, and every knob each effect declares. Nothing in the panel knows what a compressor is. The registry supplies each parameter's range, step, unit and scale and the panel renders what it finds, so adding an effect or a knob upstream needs no change here, and the panel cannot offer a value the renderer would reject — a typed-in figure is clamped into the declared range on the way through. Frequency and time controls span three or four decades, so those declare a log scale and the slider maps exponentially; a linear slider would spend most of its travel somewhere useless. Reorder is a first-class control because chain order changes the sound: a reverb before a compressor is not the same as after. Carve gets its own block rather than an entry in the add menu, with a picker for the voice track to listen to. It processes this track based on another one, which is how a sidechain control works — it lives on the track that changes, and names the source. * feat(studio): show the Audio FX section on audio tracks Adds `audioFx` to the editing-affordances contract and renders the FX panel in the inspector when an `<audio>` element is selected. The section is audio-only. A `<video>` carries its sound on a separate `<audio>` element, so an FX chain on the video would have nothing to process. Chain and carve settings are written straight back onto the element as serialised attributes, the way colour grading carries its config, so persistence is an ordinary attribute write and needs no new server route. A chain that cannot be parsed renders as empty rather than breaking the panel, and the attribute is left untouched until the user changes something. The collapsed group summarises what is on the track ("2 effects + carve") so the state is visible without expanding it. Wired into PropertyPanelFlat rather than PropertyPanel: STUDIO_FLAT_INSPECTOR_ENABLED defaults to true, so the flat inspector is what actually renders. * refactor(studio): lift audioFxSummary out of PropertyPanelFlat `PropertyPanelFlat.tsx` is 612 lines here against the repo's 600-line cap, so the required File size check is red — the sole reason this PR is blocked. The review says as much: "mechanical fix (~5 min), not a design problem. Code itself is LGTM." Moves `audioFxSummary` to `audioFxSummary.ts`, the same file a later branch creates for it. Deliberately the smallest cut that clears the cap rather than the whole `AudioFxGroup` extraction: every later commit in the stack edits AudioFxGroup, so moving it here would collide with each of them, while almost nothing touches this function. 595 lines. * feat(core,studio): hear the FX chain in preview, and run the carve analysis Splices an element's FX chain into the playback graph so preview stops being silent about effects, and wires the carve button that was previously inert. The chain goes between the decoded source and its gain stage: effects see the raw signal and volume automation rides on their output, matching the order the offline render uses. Since preview and render call the same graph builders, what is heard while scrubbing is what gets written. The splice lives in the transport rather than on the `<audio>` element. The transport plays each track from a decoded AudioBuffer and mutes the element to avoid doubling, so capturing the element with createMediaElementSource would have processed a stream nothing is listening to — it looked like it worked because the call succeeded, and the audio was unchanged. A chain that cannot be built plays dry rather than silencing the track, which is the right failure in preview: the author keeps working and hears the source. The render still refuses, because shipping the dry signal there would be wrong. Carve now analyses for real: it decodes the chosen voice track, ranks its bands and writes the resulting peaking filters onto this track. Generated nodes are tagged `fromCarve`, so re-running replaces the previous carve instead of stacking another set on top of hand-added effects. Known limitation: the graph is built when a source is scheduled, so a knob turned mid-playback takes effect on the next play or seek rather than immediately. Live re-parameterisation needs the transport to hold the handle and forward updates. * fix(studio,core): stop parameter drags from restarting playback Dragging a knob wrote the chain through the persisting attribute path on every input event. That path refreshes the preview, which reloads the composition and reschedules audio — so a single drag reloaded dozens of times and playback stuttered the whole way. Drags now go through `onSetAttributeLive`, the same path colour grading uses for scrubs: it coalesces undo entries and sets `skipRefresh`, so no reload happens. The persisting write fires once, when the gesture ends — pointer-up or blur for a slider, Enter or blur for a typed value. A select commits immediately since there is no drag to wait for. While dragging, the control is driven from local state. Waiting for the value to round-trip through the element attribute made the knob lag behind the pointer. For the change to be audible without a reload, the graph now follows the attribute: the chain installed by the transport observes the element and re-parameterises itself in place, so a value change lands on the next 128-sample quantum. A shape change (effect added, bypassed, pole count) cannot be patched into a running graph, so it still waits for the next schedule rather than cutting the audio mid-play. The regression test drags a slider through several values and asserts the persisting handler is untouched until release. * feat(studio): put the audio FX rack behind its canary Gates the rack on `isCanaryEnabled("audio-fx-rack")`, which is registered at 0% — so the whole 47-PR stack can land without showing anyone a feature that has not been measured yet. The gate sits on the AUTHORING surface and nowhere else. The runtime and the render still honour a `data-fx-chain` already on an element, so a composition written through the skill or by `carve.mjs` keeps its processing rather than going silently dry for anyone outside the cohort. A canary should stage who can REACH a feature, not make an attribute somebody already wrote stop working with no error. Gated at the panel rather than in `resolveEditingSections`: the affordance resolver is a pure function in core describing what an element CAN support, and rollout state is not a property of an `<audio>` tag. Pinned the 0% with a test, and checked it fails at 25 — a ramp should have to break something that says "this ships dark" out loud. One gap, stated rather than papered over: the gate itself has no unit test. I wrote one and deleted it, because `PropertyPanel.test.tsx`'s harness never renders the Audio FX group for its audio fixture even with the gate removed — so the test passed for the wrong reason in the off case and could not pass at all in the on case. A test that cannot fail for the right reason is worse than none. Verifying the gate needs the panel harness to mount that section first, which is its own change. * fix(core): register FX worklets before building nodes that need them An AudioWorkletNode cannot be constructed before its processor is registered — it throws, and the surrounding chain is lost with it. `attachElementFxChain` built the chain first and only then called `ensureAudioFxWorklets`, so every worklet-backed effect (compressor, limiter, gate, bitcrush) threw on construction and the track fell back to dry. Instrumenting the preview showed `hf-compressor: InvalidStateError` with addModule never called at all. When the module has not landed yet the track now plays dry and the graph is swapped in once registration resolves, so the effect arrives a moment late instead of never. Registration is also tracked per context rather than in one module-level promise. A processor registered on one AudioContext does not exist on another, so the shared promise made every context after the first believe it was ready when it was not — the studio's transport owns its own context, which is exactly that case. With the worklets actually running, the compressor's per-sample log10 and pow became real audio-thread work. Samples below the knee have a gain of exactly unity and need neither, so the envelope is now compared in the linear domain and the transcendentals only run for samples that are actually being compressed. * refactor(studio): split the FX node row out of FxSection Clears the health findings the FX stack left behind: the chain-node render callback was a 70-line closure over half of FxSection's state, and the two reorder arrows were the same button written twice. Also drops two exports with no consumers, and registers the audio FX runtime stub as an entry point — it is bundled by file path, so nothing imports it. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * feat(core): automation envelope model for audio tracks Adds the data model behind Ableton-style automation lanes: breakpoint envelopes over track volume or one knob of one effect in the track's FX chain, stored on the element as `data-automation`. Times are clip-local, so an envelope travels with the clip when it moves — the clip-envelope model rather than arrangement automation. `sampleAutomationLane` is the single interpolator. The lane drawing, the preview scheduler and the render bake all call it, so the picture and the sound cannot disagree about the curve. Log-scaled parameters interpolate in log space, matching what their own knob already promises. FX nodes gain a stable `id`, minted by count rather than randomly so the document is the same on every machine. Lanes address nodes by id, so reordering a chain never re-points a lane at a different effect, and a lane whose effect was deleted is dropped rather than left to reattach. Also warns when a track carries both a volume lane and a GSAP volume tween, since only the lane is heard and the tween silently does nothing. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * refactor(studio): lift the audio FX group out of PropertyPanelFlat `PropertyPanelFlat.tsx` was 672 lines against the repo's 600-line cap, so the required File size check was red — the sole reason #3014 and #3022 are blocked. Both reviews say the same thing: "mechanical fix, not a design problem. Code itself is LGTM." Moves `AudioFxGroup` and `audioFxSummary` into `propertyPanelAudioFxGroup.tsx`, which is where a later branch puts them anyway — done here so the file is under the cap from the point it first crosses it, rather than ten branches later. 533 lines now. The four audio imports it no longer needs go with it. Not fixed here: three `FxSection carve` tests fail on this branch with "Cannot read properties of undefined (reading 'toFixed')". Confirmed pre-existing by stashing this change and re-running — that is the separate `Test` failure the review also flags. * feat(core): expose the AudioParams behind automatable FX knobs Marks the knobs an automation lane can drive and has each graph builder hand back the AudioParam behind them, so a scheduler can write to a running effect without knowing what the effect is. A knob is not always one AudioParam. A wet/dry mix is two gains moving in opposition, and a knob in milliseconds drives a delay time in seconds, so each target carries the mapping out of the knob's own declared unit. What stays unautomatable is stated where it is decided: a WaveShaper curve, a convolution impulse and a one-pole filter's coefficients are all rebuilt wholesale rather than scheduled, and the four worklet effects take values by postMessage rather than through AudioParams. The registry flag is written by hand, so a test builds every effect and checks the exposure both ways — nothing flagged is missing, nothing exposed is unflagged. A flag that lied would offer a lane that silently did nothing. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * feat(core): play automation envelopes in preview Schedules each lane onto the AudioParams behind its knob using native ramps and value curves. Nothing evaluates the envelope per frame: it is handed to the audio thread once, so it stays sample-accurate however busy the main thread is, and the offline render will schedule it the same way. Timing comes from the transport, so an envelope survives seeking into the middle of a clip, a clip that has not started yet, and a playback rate that compresses clip seconds into context seconds. A straight line is only scheduled as a ramp when nothing bends it — no curvature, a linear parameter scale, and no unit mapping. Log-scaled parameters and mapped ones are sampled instead, since a delay knob in milliseconds and a wet/dry pair moving in opposition are not linear in the parameter they drive. Lanes with nowhere to write are skipped rather than reported: a one-pole filter exposes no frequency param, and the worklet effects expose none at all. Editing an envelope mid-playback re-aims it at the live playhead rather than restarting the track. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): make the volume lane audible in preview The envelope was scheduled onto the transport's gain AudioParam, but the runtime rewrites that gain every tick from `data-volume` and the GSAP-seeked value — so it was erased within a frame. Volume automation was correct in the render and inaudible while previewing. The lane now feeds the per-tick path where the probed volume keyframes already sit, checked ahead of them so the two cannot fight, and the transport no longer schedules volume at all: one mechanism instead of two racing. The cost is honest — in preview the level steps per tick rather than per sample, exactly as the existing keyframe path does. The render still bakes it into the PCM sample-accurately, and FX parameters are still scheduled on their own AudioParams, since nothing rewrites those. Parsed lanes are cached by attribute text: the runtime asks once per tick per track, and parsing there would run the JSON parser 60 times a second for a value that only changes on an edit. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * feat(engine): bake automation envelopes into the render The offline render schedules FX lanes with the same scheduler preview uses, inside the OfflineAudioContext that already runs the same graph builders. The input WAV is the clip's own audio from its first sample, so clip-local time is offline time and the envelope needs no offset. Volume lanes take the existing PCM bake rather than a second mechanism: the lane is converted to keyframes, so a straight fade stays two of them and only a bent segment is sampled — the baker interpolates linearly and would otherwise quietly straighten the curve. A volume lane supersedes keyframes probed from the timeline, which `lint` already warns about. A browser test sweeps a lowpass from below a 2 kHz tone to well above it and measures both ends. Parsing the envelope is not the same as scheduling it, and only running the real thing tells the two apart. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): apply chain edits to the running graph A structural edit — an effect added, removed, bypassed, or a filter's pole count switched — was dropped. `buildFxChain`'s update reports false when the change is not merely new values, and the attribute observer ignored that, so the edit only took hold when the persisting write reloaded the composition. That reload restarted every playing track, which is what was heard as the audio chopping. The graph is now swapped in place: the old effects are detached, the new ones built and connected between the same source and gain, and any lanes re-scheduled onto the new nodes. The source node is never touched, so playback does not restart. A track with no chain is watched too, rather than wired through and forgotten, so adding its first effect is heard the same way. That means the function always returns a disposer instead of null for the empty case. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(studio): drop the FX panel's dead __testables export Fallow audit flagged it — no test imports the module. * fix(core,studio): clear the remaining Fallow audit findings on the FX panel - Split FxSection's per-node row into FxNodeRow + FxNodeControls so the CRAP score (31.6, threshold 30) splits across two smaller units instead of moving wholesale with one extraction. - Dedupe the repeated "open the add menu, read its items" block in propertyPanelFxSection.test.tsx into openAddMenuItems(). - Merge build-audio-fx-runtime.ts and build-position-edits-render.ts into one build-inline-artifact.ts, config-selected by CLI arg — the two scripts were a byte-for-byte clone save for names. - Exempt canary.test.ts's rawFnv (a deliberate independent reimplementation used to cross-check canaryBucket, per its own docstring) and the property-panel test files' shared renderInto/mount scaffolding (pre-existing across 9 files, 2 outside this stack) in .fallowrc.jsonc, consistent with this file's existing exemptions for the same class of intentional/pre-existing duplication. * fix(ci): allowlist the build-script consolidation in the no-main-deletions guard build-audio-fx-runtime.ts and build-position-edits-render.ts were merged into build-inline-artifact.ts to kill a fallow duplication finding; the deletion guard flagged that as an accidental loss since main still has both originals. * fix(core): dedupe the wet/dry mix math between delayFeedback and chorusLfo Both effect builders set wet.gain to the mix and dry.gain to its complement in identical two-line blocks; fallow kept re-flagging it as a 10-line clone on every unrelated change. Extracted setWetDryMix. * fix(core): remove the build-audio-fx-runtime.ts stray resurrected by a main merge An earlier merge with main brought this deleted file back (git's merge/delete handling on an unchanged-on-one-side file); package.json already points at build-inline-artifact.ts, so it sat unreachable and duplicating that file's config, both of which fallow flagged. * fix(studio): pull TimelineLanes under the 600-line cap TimelineLanes.tsx hit 620 lines. Extracted the three per-clip pointer gestures (resize-start, pointer-down move-arm, click/razor-split) into createClipGestureHandlers — one factory call per rendered clip instead of ~120 lines of inline handler bodies in the render loop. 529 lines now. * fix(studio): split the extracted pointerdown handler under the CRAP threshold Moving the ~120-line gesture logic into timelineClipGestureHandlers.ts concentrated it into two functions fallow flagged (onPointerDown at CRAP 63.6, onResizeStart at 31.6). Split the decision logic (which gesture a pointerdown implies) into a pure resolvePointerDownAction, then split its own intent-blocking check into isIntentBlocked. onResizeStart's guard moved into canStartResize. Every function now scores under 30. * fix(studio): drop the unused DomEditSelection import in PropertyPanelFlat CI caught it on PR #3026 (wa-12-panel-params); a later refactor in the stack removed the last use of the type here without removing the import. * fix(studio): close the typecheck and fallow gaps wa-18b-reschedule opened useAutomationLanes.ts's write() assumed gesture-scoped coalescing and a preview-only commit that useDomEditAttributeCommits.ts never grew — backported that option support from its own later commit so the two sides of the API agree. The paste path and its tests were missing the box selection's v0/v1 bounds a sibling commit added to AutomationSelection. The FX panel's carve controls still edited the six mechanism numbers (maxCutDb, bands, intelligibilityBias) after carveProfile() collapsed authoring to one Strength knob, so those fields no longer existed on HfCarveSettings; UI now edits strength, and analyseCarveBands is called with carveProfile(strength). Also closes fallow's complexity, dead-code and duplication findings on this PR's diff: extracted automationLaneDragMath.ts (pure group/point-move math) and useAutomationRangeDrag.ts (the marquee-select gesture) out of useAutomationLaneGestures.ts, pulled a couple of render-loop ternaries and a resolver into named functions, dropped an export nothing outside its file used, and shared a step-simplifier between audioCarve's two envelope builders. The edge-stretch vs. box-select priority test in TimelineAutomationLane.test was still pinning the pre-box-select rule (edge wins over a point sitting on it) that a sibling commit deliberately reversed — a point inside the box is now selected content, so grabbing it drags the group instead. Updated the test to the shipped rule instead of the old one. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): cap the via conic's weight so an edge-clamped via point can't NaN A via point pulled out past the segment (viaX: 5, viaY: -3) clamps to (0.999, 0.001) — exactly on the steady region's edge, where edge - viaX is 0. viaConic divided by that zero to get an infinite weight, and shapeVia turned Infinity into NaN a few steps later (Infinity - Infinity in the quadratic coefficient). NaN reaching setValueCurveAtTime silences the automated parameter for the rest of the render. Capped the weight at 1e6 instead of leaving it unbounded — past that point the arc already reads as touching the via point, so nothing visible is lost. Also hardened shapeVia's existing denominator guard (`<= 0`) to `!(> 0)`, since NaN fails the original comparison and fell through it. Review by Miga (PR #3208). * fix(studio-server): fingerprint the proactive waveform cache key too The route already keys the waveform cache on the asset's size and mtime as well as its path, so a rebuilt-in-place file gets fresh peaks instead of stale ones. generateWaveformCache — the proactive path that runs on upload — still called buildWaveformCacheKey with the path alone, so it wrote to a different key than the route reads from (making the pre-generated cache never found) and kept the exact collision bug this fingerprint exists to fix on its own path. Review by Miga (PR #3211). * style(docs): run oxfmt on the /hyperframes-audio skill docs Table column widths had drifted out of alignment with oxfmt's own rules, failing format:check and blocking the Preflight gate every downstream branch inherits. Whitespace only, no content change. * fix(studio): widen PropertyPanel's resetModules render timeout again The 20s margin (already once widened for the same reason) is timing out in CI's full-monorepo Test run — the resetModules()+fresh-import render this test needs is uncached and competes with every other package's test suite for the same worker pool, and the same test passes in well under 2s standalone. Went to 45s rather than re-tuning to whatever number happens to clear the current CI load, since that number moves every time CI gains a package. * feat(core): carve against every voice over a bed, always (#3212) * feat(core): carve against every voice over a bed, always dynamically A bed usually runs under a whole sequence — a narrator, an interview answer, a second presenter — and carving against one of them left the others fighting it. `source` becomes `sources`, and `mixCarveSources` sums every voice onto the BED's clock before anything is measured. That is what keeps one analysis sufficient: the chain is fixed, so there is no per-voice filter to switch between, and bands drawn from all the speech there is with envelopes that rise wherever any of it happens answer the actual question — where and when is speech masking this bed. Summed rather than averaged: two people talking at once mask more than either alone. Audio before the bed starts is dropped rather than folded in at zero, since it plays over nothing and shifting it would put a cut where there is no voice. `dynamic` is gone. A fixed depth thins the bed through every pause, and once both have been heard there is no reason to want it, so every carve follows the speech. Two helpers the panel and the headless script now share instead of each carrying a copy — two definitions of "what does this name suggest" drift, and then the two disagree about which track is the voice: - `classifyAudioName` reads a track's kind from its id and filename together. `unknown` is deliberately common: treating an unrecognised name as "not a voice" would hide the one track somebody needs to pick. - `clipsOverlap` keeps out a voice that never plays while the bed does. An unwritten duration counts as unbounded, not zero — refusing a clip whose length the composition leaves to the media would drop the commonest case there is. Files written before this still load: a single `source` reads as a one-voice list, a stored `dynamic` is ignored, and an absent attribute means the defaults whole. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): stop \b from missing underscore-separated names, guard clipsOverlap's negative duration \b treats `_` as a word character, so \bbed\b never matched bed_01, music_bed_loop, or theme_song, and \bvo\b/\bvox\b/\btts\b had the same gap — an underscore-separated bed classified as "unknown" and could end up offered as its own carve source. Replaced the short hints with a boundary that actually excludes letters and digits on both sides. clipsOverlap computed end = start + duration without guarding sign, so a negative duration put end before start — an interval that does not describe anything, and one specific case showed it silently dropping a real overlap (a shorter, earlier broken end rejected a clip that genuinely contained the point). Duration clamps to zero instead: a clip cannot un-play time, and a zero-length clip at its start is the sane reading of "duration nobody wrote down as positive." Review by Miga (PR #3212). --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(studio): port the carve UI off the removed source/dynamic fields #3212 (accidentally squash-merged into this branch instead of main) changed HfCarveSettings from a single `source` + `dynamic` toggle to a `sources` list with dynamic mode removed outright — the multi-voice UI consumer that goes with that shape lands in the very next PR, so this branch was left with a type that no longer matched its own code. Minimal port, not the multi-voice redesign that PR does properly: the "Listen to" picker and analyse() treat sources[0] as the one voice this UI still understands, and every dynamic-mode branch (the automated envelope lanes, the toggle, the checkbox) is gone along with the field — a carve is now always the static value the analysis computes, matching what the type change made permanent. Test suite trimmed the same way: the automation-lane and toggle tests covered behavior that no longer exists. --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>

* fix(ci): allowlist the build-script consolidation in the no-main-deletions guard build-audio-fx-runtime.ts and build-position-edits-render.ts were merged into build-inline-artifact.ts to kill a fallow duplication finding; the deletion guard flagged that as an accidental loss since main still has both originals. * fix(core): dedupe the wet/dry mix math between delayFeedback and chorusLfo Both effect builders set wet.gain to the mix and dry.gain to its complement in identical two-line blocks; fallow kept re-flagging it as a 10-line clone on every unrelated change. Extracted setWetDryMix. * fix(core): remove the build-audio-fx-runtime.ts stray resurrected by a main merge An earlier merge with main brought this deleted file back (git's merge/delete handling on an unchanged-on-one-side file); package.json already points at build-inline-artifact.ts, so it sat unreachable and duplicating that file's config, both of which fallow flagged. * fix(studio): pull TimelineLanes under the 600-line cap TimelineLanes.tsx hit 620 lines. Extracted the three per-clip pointer gestures (resize-start, pointer-down move-arm, click/razor-split) into createClipGestureHandlers — one factory call per rendered clip instead of ~120 lines of inline handler bodies in the render loop. 529 lines now. * fix(studio): split the extracted pointerdown handler under the CRAP threshold Moving the ~120-line gesture logic into timelineClipGestureHandlers.ts concentrated it into two functions fallow flagged (onPointerDown at CRAP 63.6, onResizeStart at 31.6). Split the decision logic (which gesture a pointerdown implies) into a pure resolvePointerDownAction, then split its own intent-blocking check into isIntentBlocked. onResizeStart's guard moved into canStartResize. Every function now scores under 30. * fix(studio): drop the unused DomEditSelection import in PropertyPanelFlat CI caught it on PR #3026 (wa-12-panel-params); a later refactor in the stack removed the last use of the type here without removing the import. * fix(studio): close the typecheck and fallow gaps wa-18b-reschedule opened useAutomationLanes.ts's write() assumed gesture-scoped coalescing and a preview-only commit that useDomEditAttributeCommits.ts never grew — backported that option support from its own later commit so the two sides of the API agree. The paste path and its tests were missing the box selection's v0/v1 bounds a sibling commit added to AutomationSelection. The FX panel's carve controls still edited the six mechanism numbers (maxCutDb, bands, intelligibilityBias) after carveProfile() collapsed authoring to one Strength knob, so those fields no longer existed on HfCarveSettings; UI now edits strength, and analyseCarveBands is called with carveProfile(strength). Also closes fallow's complexity, dead-code and duplication findings on this PR's diff: extracted automationLaneDragMath.ts (pure group/point-move math) and useAutomationRangeDrag.ts (the marquee-select gesture) out of useAutomationLaneGestures.ts, pulled a couple of render-loop ternaries and a resolver into named functions, dropped an export nothing outside its file used, and shared a step-simplifier between audioCarve's two envelope builders. The edge-stretch vs. box-select priority test in TimelineAutomationLane.test was still pinning the pre-box-select rule (edge wins over a point sitting on it) that a sibling commit deliberately reversed — a point inside the box is now selected content, so grabbing it drags the group instead. Updated the test to the shipped rule instead of the old one. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): cap the via conic's weight so an edge-clamped via point can't NaN A via point pulled out past the segment (viaX: 5, viaY: -3) clamps to (0.999, 0.001) — exactly on the steady region's edge, where edge - viaX is 0. viaConic divided by that zero to get an infinite weight, and shapeVia turned Infinity into NaN a few steps later (Infinity - Infinity in the quadratic coefficient). NaN reaching setValueCurveAtTime silences the automated parameter for the rest of the render. Capped the weight at 1e6 instead of leaving it unbounded — past that point the arc already reads as touching the via point, so nothing visible is lost. Also hardened shapeVia's existing denominator guard (`<= 0`) to `!(> 0)`, since NaN fails the original comparison and fell through it. Review by Miga (PR #3208). * fix(studio-server): fingerprint the proactive waveform cache key too The route already keys the waveform cache on the asset's size and mtime as well as its path, so a rebuilt-in-place file gets fresh peaks instead of stale ones. generateWaveformCache — the proactive path that runs on upload — still called buildWaveformCacheKey with the path alone, so it wrote to a different key than the route reads from (making the pre-generated cache never found) and kept the exact collision bug this fingerprint exists to fix on its own path. Review by Miga (PR #3211). * style(docs): run oxfmt on the /hyperframes-audio skill docs Table column widths had drifted out of alignment with oxfmt's own rules, failing format:check and blocking the Preflight gate every downstream branch inherits. Whitespace only, no content change. * fix(core): stop \b from missing underscore-separated names, guard clipsOverlap's negative duration \b treats `_` as a word character, so \bbed\b never matched bed_01, music_bed_loop, or theme_song, and \bvo\b/\bvox\b/\btts\b had the same gap — an underscore-separated bed classified as "unknown" and could end up offered as its own carve source. Replaced the short hints with a boundary that actually excludes letters and digits on both sides. clipsOverlap computed end = start + duration without guarding sign, so a negative duration put end before start — an interval that does not describe anything, and one specific case showed it silently dropping a real overlap (a shorter, earlier broken end rejected a clip that genuinely contained the point). Duration clamps to zero instead: a clip cannot un-play time, and a zero-length clip at its start is the sane reading of "duration nobody wrote down as positive." Review by Miga (PR #3212). * fix(studio): widen PropertyPanel's resetModules render timeout again The 20s margin (already once widened for the same reason) is timing out in CI's full-monorepo Test run — the resetModules()+fresh-import render this test needs is uncached and competes with every other package's test suite for the same worker pool, and the same test passes in well under 2s standalone. Went to 45s rather than re-tuning to whatever number happens to clear the current CI load, since that number moves every time CI gains a package. * fix(studio): stop the single-candidate auto-apply carve firing twice Two auto-apply effects both fire when sourceOptions.length === 1: the multi-candidate effect only guards length === 0, so a single candidate passes it too, and the single-candidate effect passes its own guard right after — both compute the same sources list and both call setCarve, so the common case (one narrator, one bed) triggered two decodes, two FFT runs, and two concurrent attribute writes for one decision. The multi-candidate effect now defers to its sibling for exactly one candidate, which already has its own detailed handling for that case. Review by Miga (PR #3213). * feat(core): carve against every voice over a bed, always (#3212) * feat(core): carve against every voice over a bed, always dynamically A bed usually runs under a whole sequence — a narrator, an interview answer, a second presenter — and carving against one of them left the others fighting it. `source` becomes `sources`, and `mixCarveSources` sums every voice onto the BED's clock before anything is measured. That is what keeps one analysis sufficient: the chain is fixed, so there is no per-voice filter to switch between, and bands drawn from all the speech there is with envelopes that rise wherever any of it happens answer the actual question — where and when is speech masking this bed. Summed rather than averaged: two people talking at once mask more than either alone. Audio before the bed starts is dropped rather than folded in at zero, since it plays over nothing and shifting it would put a cut where there is no voice. `dynamic` is gone. A fixed depth thins the bed through every pause, and once both have been heard there is no reason to want it, so every carve follows the speech. Two helpers the panel and the headless script now share instead of each carrying a copy — two definitions of "what does this name suggest" drift, and then the two disagree about which track is the voice: - `classifyAudioName` reads a track's kind from its id and filename together. `unknown` is deliberately common: treating an unrecognised name as "not a voice" would hide the one track somebody needs to pick. - `clipsOverlap` keeps out a voice that never plays while the bed does. An unwritten duration counts as unbounded, not zero — refusing a clip whose length the composition leaves to the media would drop the commonest case there is. Files written before this still load: a single `source` reads as a one-voice list, a stored `dynamic` is ignored, and an absent attribute means the defaults whole. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): stop \b from missing underscore-separated names, guard clipsOverlap's negative duration \b treats `_` as a word character, so \bbed\b never matched bed_01, music_bed_loop, or theme_song, and \bvo\b/\bvox\b/\btts\b had the same gap — an underscore-separated bed classified as "unknown" and could end up offered as its own carve source. Replaced the short hints with a boundary that actually excludes letters and digits on both sides. clipsOverlap computed end = start + duration without guarding sign, so a negative duration put end before start — an interval that does not describe anything, and one specific case showed it silently dropping a real overlap (a shorter, earlier broken end rejected a clip that genuinely contained the point). Duration clamps to zero instead: a clip cannot un-play time, and a zero-length clip at its start is the sane reading of "duration nobody wrote down as positive." Review by Miga (PR #3212). --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(studio): port the carve UI off the removed source/dynamic fields #3212 (accidentally squash-merged into this branch instead of main) changed HfCarveSettings from a single `source` + `dynamic` toggle to a `sources` list with dynamic mode removed outright — the multi-voice UI consumer that goes with that shape lands in the very next PR, so this branch was left with a type that no longer matched its own code. Minimal port, not the multi-voice redesign that PR does properly: the "Listen to" picker and analyse() treat sources[0] as the one voice this UI still understands, and every dynamic-mode branch (the automated envelope lanes, the toggle, the checkbox) is gone along with the field — a carve is now always the static value the analysis computes, matching what the type change made permanent. Test suite trimmed the same way: the automation-lane and toggle tests covered behavior that no longer exists. --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>

* fix(core): dedupe the wet/dry mix math between delayFeedback and chorusLfo Both effect builders set wet.gain to the mix and dry.gain to its complement in identical two-line blocks; fallow kept re-flagging it as a 10-line clone on every unrelated change. Extracted setWetDryMix. * fix(core): remove the build-audio-fx-runtime.ts stray resurrected by a main merge An earlier merge with main brought this deleted file back (git's merge/delete handling on an unchanged-on-one-side file); package.json already points at build-inline-artifact.ts, so it sat unreachable and duplicating that file's config, both of which fallow flagged. * fix(studio): pull TimelineLanes under the 600-line cap TimelineLanes.tsx hit 620 lines. Extracted the three per-clip pointer gestures (resize-start, pointer-down move-arm, click/razor-split) into createClipGestureHandlers — one factory call per rendered clip instead of ~120 lines of inline handler bodies in the render loop. 529 lines now. * fix(studio): split the extracted pointerdown handler under the CRAP threshold Moving the ~120-line gesture logic into timelineClipGestureHandlers.ts concentrated it into two functions fallow flagged (onPointerDown at CRAP 63.6, onResizeStart at 31.6). Split the decision logic (which gesture a pointerdown implies) into a pure resolvePointerDownAction, then split its own intent-blocking check into isIntentBlocked. onResizeStart's guard moved into canStartResize. Every function now scores under 30. * fix(studio): drop the unused DomEditSelection import in PropertyPanelFlat CI caught it on PR #3026 (wa-12-panel-params); a later refactor in the stack removed the last use of the type here without removing the import. * fix(studio): close the typecheck and fallow gaps wa-18b-reschedule opened useAutomationLanes.ts's write() assumed gesture-scoped coalescing and a preview-only commit that useDomEditAttributeCommits.ts never grew — backported that option support from its own later commit so the two sides of the API agree. The paste path and its tests were missing the box selection's v0/v1 bounds a sibling commit added to AutomationSelection. The FX panel's carve controls still edited the six mechanism numbers (maxCutDb, bands, intelligibilityBias) after carveProfile() collapsed authoring to one Strength knob, so those fields no longer existed on HfCarveSettings; UI now edits strength, and analyseCarveBands is called with carveProfile(strength). Also closes fallow's complexity, dead-code and duplication findings on this PR's diff: extracted automationLaneDragMath.ts (pure group/point-move math) and useAutomationRangeDrag.ts (the marquee-select gesture) out of useAutomationLaneGestures.ts, pulled a couple of render-loop ternaries and a resolver into named functions, dropped an export nothing outside its file used, and shared a step-simplifier between audioCarve's two envelope builders. The edge-stretch vs. box-select priority test in TimelineAutomationLane.test was still pinning the pre-box-select rule (edge wins over a point sitting on it) that a sibling commit deliberately reversed — a point inside the box is now selected content, so grabbing it drags the group instead. Updated the test to the shipped rule instead of the old one. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): cap the via conic's weight so an edge-clamped via point can't NaN A via point pulled out past the segment (viaX: 5, viaY: -3) clamps to (0.999, 0.001) — exactly on the steady region's edge, where edge - viaX is 0. viaConic divided by that zero to get an infinite weight, and shapeVia turned Infinity into NaN a few steps later (Infinity - Infinity in the quadratic coefficient). NaN reaching setValueCurveAtTime silences the automated parameter for the rest of the render. Capped the weight at 1e6 instead of leaving it unbounded — past that point the arc already reads as touching the via point, so nothing visible is lost. Also hardened shapeVia's existing denominator guard (`<= 0`) to `!(> 0)`, since NaN fails the original comparison and fell through it. Review by Miga (PR #3208). * fix(studio-server): fingerprint the proactive waveform cache key too The route already keys the waveform cache on the asset's size and mtime as well as its path, so a rebuilt-in-place file gets fresh peaks instead of stale ones. generateWaveformCache — the proactive path that runs on upload — still called buildWaveformCacheKey with the path alone, so it wrote to a different key than the route reads from (making the pre-generated cache never found) and kept the exact collision bug this fingerprint exists to fix on its own path. Review by Miga (PR #3211). * style(docs): run oxfmt on the /hyperframes-audio skill docs Table column widths had drifted out of alignment with oxfmt's own rules, failing format:check and blocking the Preflight gate every downstream branch inherits. Whitespace only, no content change. * fix(core): stop \b from missing underscore-separated names, guard clipsOverlap's negative duration \b treats `_` as a word character, so \bbed\b never matched bed_01, music_bed_loop, or theme_song, and \bvo\b/\bvox\b/\btts\b had the same gap — an underscore-separated bed classified as "unknown" and could end up offered as its own carve source. Replaced the short hints with a boundary that actually excludes letters and digits on both sides. clipsOverlap computed end = start + duration without guarding sign, so a negative duration put end before start — an interval that does not describe anything, and one specific case showed it silently dropping a real overlap (a shorter, earlier broken end rejected a clip that genuinely contained the point). Duration clamps to zero instead: a clip cannot un-play time, and a zero-length clip at its start is the sane reading of "duration nobody wrote down as positive." Review by Miga (PR #3212). * fix(studio): widen PropertyPanel's resetModules render timeout again The 20s margin (already once widened for the same reason) is timing out in CI's full-monorepo Test run — the resetModules()+fresh-import render this test needs is uncached and competes with every other package's test suite for the same worker pool, and the same test passes in well under 2s standalone. Went to 45s rather than re-tuning to whatever number happens to clear the current CI load, since that number moves every time CI gains a package. * fix(studio): stop the single-candidate auto-apply carve firing twice Two auto-apply effects both fire when sourceOptions.length === 1: the multi-candidate effect only guards length === 0, so a single candidate passes it too, and the single-candidate effect passes its own guard right after — both compute the same sources list and both call setCarve, so the common case (one narrator, one bed) triggered two decodes, two FFT runs, and two concurrent attribute writes for one decision. The multi-candidate effect now defers to its sibling for exactly one candidate, which already has its own detailed handling for that case. Review by Miga (PR #3213). * feat(core): carve against every voice over a bed, always (#3212) * feat(core): carve against every voice over a bed, always dynamically A bed usually runs under a whole sequence — a narrator, an interview answer, a second presenter — and carving against one of them left the others fighting it. `source` becomes `sources`, and `mixCarveSources` sums every voice onto the BED's clock before anything is measured. That is what keeps one analysis sufficient: the chain is fixed, so there is no per-voice filter to switch between, and bands drawn from all the speech there is with envelopes that rise wherever any of it happens answer the actual question — where and when is speech masking this bed. Summed rather than averaged: two people talking at once mask more than either alone. Audio before the bed starts is dropped rather than folded in at zero, since it plays over nothing and shifting it would put a cut where there is no voice. `dynamic` is gone. A fixed depth thins the bed through every pause, and once both have been heard there is no reason to want it, so every carve follows the speech. Two helpers the panel and the headless script now share instead of each carrying a copy — two definitions of "what does this name suggest" drift, and then the two disagree about which track is the voice: - `classifyAudioName` reads a track's kind from its id and filename together. `unknown` is deliberately common: treating an unrecognised name as "not a voice" would hide the one track somebody needs to pick. - `clipsOverlap` keeps out a voice that never plays while the bed does. An unwritten duration counts as unbounded, not zero — refusing a clip whose length the composition leaves to the media would drop the commonest case there is. Files written before this still load: a single `source` reads as a one-voice list, a stored `dynamic` is ignored, and an absent attribute means the defaults whole. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): stop \b from missing underscore-separated names, guard clipsOverlap's negative duration \b treats `_` as a word character, so \bbed\b never matched bed_01, music_bed_loop, or theme_song, and \bvo\b/\bvox\b/\btts\b had the same gap — an underscore-separated bed classified as "unknown" and could end up offered as its own carve source. Replaced the short hints with a boundary that actually excludes letters and digits on both sides. clipsOverlap computed end = start + duration without guarding sign, so a negative duration put end before start — an interval that does not describe anything, and one specific case showed it silently dropping a real overlap (a shorter, earlier broken end rejected a clip that genuinely contained the point). Duration clamps to zero instead: a clip cannot un-play time, and a zero-length clip at its start is the sane reading of "duration nobody wrote down as positive." Review by Miga (PR #3212). --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(studio): port the carve UI off the removed source/dynamic fields #3212 (accidentally squash-merged into this branch instead of main) changed HfCarveSettings from a single `source` + `dynamic` toggle to a `sources` list with dynamic mode removed outright — the multi-voice UI consumer that goes with that shape lands in the very next PR, so this branch was left with a type that no longer matched its own code. Minimal port, not the multi-voice redesign that PR does properly: the "Listen to" picker and analyse() treat sources[0] as the one voice this UI still understands, and every dynamic-mode branch (the automated envelope lanes, the toggle, the checkbox) is gone along with the field — a carve is now always the static value the analysis computes, matching what the type change made permanent. Test suite trimmed the same way: the automation-lane and toggle tests covered behavior that no longer exists. --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>

…e panel (#3173) * fix(core): dedupe the wet/dry mix math between delayFeedback and chorusLfo Both effect builders set wet.gain to the mix and dry.gain to its complement in identical two-line blocks; fallow kept re-flagging it as a 10-line clone on every unrelated change. Extracted setWetDryMix. * fix(core): remove the build-audio-fx-runtime.ts stray resurrected by a main merge An earlier merge with main brought this deleted file back (git's merge/delete handling on an unchanged-on-one-side file); package.json already points at build-inline-artifact.ts, so it sat unreachable and duplicating that file's config, both of which fallow flagged. * fix(studio): pull TimelineLanes under the 600-line cap TimelineLanes.tsx hit 620 lines. Extracted the three per-clip pointer gestures (resize-start, pointer-down move-arm, click/razor-split) into createClipGestureHandlers — one factory call per rendered clip instead of ~120 lines of inline handler bodies in the render loop. 529 lines now. * fix(studio): split the extracted pointerdown handler under the CRAP threshold Moving the ~120-line gesture logic into timelineClipGestureHandlers.ts concentrated it into two functions fallow flagged (onPointerDown at CRAP 63.6, onResizeStart at 31.6). Split the decision logic (which gesture a pointerdown implies) into a pure resolvePointerDownAction, then split its own intent-blocking check into isIntentBlocked. onResizeStart's guard moved into canStartResize. Every function now scores under 30. * fix(studio): drop the unused DomEditSelection import in PropertyPanelFlat CI caught it on PR #3026 (wa-12-panel-params); a later refactor in the stack removed the last use of the type here without removing the import. * fix(studio): close the typecheck and fallow gaps wa-18b-reschedule opened useAutomationLanes.ts's write() assumed gesture-scoped coalescing and a preview-only commit that useDomEditAttributeCommits.ts never grew — backported that option support from its own later commit so the two sides of the API agree. The paste path and its tests were missing the box selection's v0/v1 bounds a sibling commit added to AutomationSelection. The FX panel's carve controls still edited the six mechanism numbers (maxCutDb, bands, intelligibilityBias) after carveProfile() collapsed authoring to one Strength knob, so those fields no longer existed on HfCarveSettings; UI now edits strength, and analyseCarveBands is called with carveProfile(strength). Also closes fallow's complexity, dead-code and duplication findings on this PR's diff: extracted automationLaneDragMath.ts (pure group/point-move math) and useAutomationRangeDrag.ts (the marquee-select gesture) out of useAutomationLaneGestures.ts, pulled a couple of render-loop ternaries and a resolver into named functions, dropped an export nothing outside its file used, and shared a step-simplifier between audioCarve's two envelope builders. The edge-stretch vs. box-select priority test in TimelineAutomationLane.test was still pinning the pre-box-select rule (edge wins over a point sitting on it) that a sibling commit deliberately reversed — a point inside the box is now selected content, so grabbing it drags the group instead. Updated the test to the shipped rule instead of the old one. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): cap the via conic's weight so an edge-clamped via point can't NaN A via point pulled out past the segment (viaX: 5, viaY: -3) clamps to (0.999, 0.001) — exactly on the steady region's edge, where edge - viaX is 0. viaConic divided by that zero to get an infinite weight, and shapeVia turned Infinity into NaN a few steps later (Infinity - Infinity in the quadratic coefficient). NaN reaching setValueCurveAtTime silences the automated parameter for the rest of the render. Capped the weight at 1e6 instead of leaving it unbounded — past that point the arc already reads as touching the via point, so nothing visible is lost. Also hardened shapeVia's existing denominator guard (`<= 0`) to `!(> 0)`, since NaN fails the original comparison and fell through it. Review by Miga (PR #3208). * fix(studio-server): fingerprint the proactive waveform cache key too The route already keys the waveform cache on the asset's size and mtime as well as its path, so a rebuilt-in-place file gets fresh peaks instead of stale ones. generateWaveformCache — the proactive path that runs on upload — still called buildWaveformCacheKey with the path alone, so it wrote to a different key than the route reads from (making the pre-generated cache never found) and kept the exact collision bug this fingerprint exists to fix on its own path. Review by Miga (PR #3211). * style(docs): run oxfmt on the /hyperframes-audio skill docs Table column widths had drifted out of alignment with oxfmt's own rules, failing format:check and blocking the Preflight gate every downstream branch inherits. Whitespace only, no content change. * fix(core): stop \b from missing underscore-separated names, guard clipsOverlap's negative duration \b treats `_` as a word character, so \bbed\b never matched bed_01, music_bed_loop, or theme_song, and \bvo\b/\bvox\b/\btts\b had the same gap — an underscore-separated bed classified as "unknown" and could end up offered as its own carve source. Replaced the short hints with a boundary that actually excludes letters and digits on both sides. clipsOverlap computed end = start + duration without guarding sign, so a negative duration put end before start — an interval that does not describe anything, and one specific case showed it silently dropping a real overlap (a shorter, earlier broken end rejected a clip that genuinely contained the point). Duration clamps to zero instead: a clip cannot un-play time, and a zero-length clip at its start is the sane reading of "duration nobody wrote down as positive." Review by Miga (PR #3212). * fix(studio): widen PropertyPanel's resetModules render timeout again The 20s margin (already once widened for the same reason) is timing out in CI's full-monorepo Test run — the resetModules()+fresh-import render this test needs is uncached and competes with every other package's test suite for the same worker pool, and the same test passes in well under 2s standalone. Went to 45s rather than re-tuning to whatever number happens to clear the current CI load, since that number moves every time CI gains a package. * fix(studio): stop the single-candidate auto-apply carve firing twice Two auto-apply effects both fire when sourceOptions.length === 1: the multi-candidate effect only guards length === 0, so a single candidate passes it too, and the single-candidate effect passes its own guard right after — both compute the same sources list and both call setCarve, so the common case (one narrator, one bed) triggered two decodes, two FFT runs, and two concurrent attribute writes for one decision. The multi-candidate effect now defers to its sibling for exactly one candidate, which already has its own detailed handling for that case. Review by Miga (PR #3213). * feat(core): carve against every voice over a bed, always (#3212) * feat(core): carve against every voice over a bed, always dynamically A bed usually runs under a whole sequence — a narrator, an interview answer, a second presenter — and carving against one of them left the others fighting it. `source` becomes `sources`, and `mixCarveSources` sums every voice onto the BED's clock before anything is measured. That is what keeps one analysis sufficient: the chain is fixed, so there is no per-voice filter to switch between, and bands drawn from all the speech there is with envelopes that rise wherever any of it happens answer the actual question — where and when is speech masking this bed. Summed rather than averaged: two people talking at once mask more than either alone. Audio before the bed starts is dropped rather than folded in at zero, since it plays over nothing and shifting it would put a cut where there is no voice. `dynamic` is gone. A fixed depth thins the bed through every pause, and once both have been heard there is no reason to want it, so every carve follows the speech. Two helpers the panel and the headless script now share instead of each carrying a copy — two definitions of "what does this name suggest" drift, and then the two disagree about which track is the voice: - `classifyAudioName` reads a track's kind from its id and filename together. `unknown` is deliberately common: treating an unrecognised name as "not a voice" would hide the one track somebody needs to pick. - `clipsOverlap` keeps out a voice that never plays while the bed does. An unwritten duration counts as unbounded, not zero — refusing a clip whose length the composition leaves to the media would drop the commonest case there is. Files written before this still load: a single `source` reads as a one-voice list, a stored `dynamic` is ignored, and an absent attribute means the defaults whole. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): stop \b from missing underscore-separated names, guard clipsOverlap's negative duration \b treats `_` as a word character, so \bbed\b never matched bed_01, music_bed_loop, or theme_song, and \bvo\b/\bvox\b/\btts\b had the same gap — an underscore-separated bed classified as "unknown" and could end up offered as its own carve source. Replaced the short hints with a boundary that actually excludes letters and digits on both sides. clipsOverlap computed end = start + duration without guarding sign, so a negative duration put end before start — an interval that does not describe anything, and one specific case showed it silently dropping a real overlap (a shorter, earlier broken end rejected a clip that genuinely contained the point). Duration clamps to zero instead: a clip cannot un-play time, and a zero-length clip at its start is the sane reading of "duration nobody wrote down as positive." Review by Miga (PR #3212). --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(studio): port the carve UI off the removed source/dynamic fields #3212 (accidentally squash-merged into this branch instead of main) changed HfCarveSettings from a single `source` + `dynamic` toggle to a `sources` list with dynamic mode removed outright — the multi-voice UI consumer that goes with that shape lands in the very next PR, so this branch was left with a type that no longer matched its own code. Minimal port, not the multi-voice redesign that PR does properly: the "Listen to" picker and analyse() treat sources[0] as the one voice this UI still understands, and every dynamic-mode branch (the automated envelope lanes, the toggle, the checkbox) is gone along with the field — a carve is now always the static value the analysis computes, matching what the type change made permanent. Test suite trimmed the same way: the automation-lane and toggle tests covered behavior that no longer exists. * docs(plans): fix pre-existing oxfmt formatting drift Blocks the regression workflow's required preflight gate. --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>

…e change (#3174) * fix(core): remove the build-audio-fx-runtime.ts stray resurrected by a main merge An earlier merge with main brought this deleted file back (git's merge/delete handling on an unchanged-on-one-side file); package.json already points at build-inline-artifact.ts, so it sat unreachable and duplicating that file's config, both of which fallow flagged. * fix(studio): pull TimelineLanes under the 600-line cap TimelineLanes.tsx hit 620 lines. Extracted the three per-clip pointer gestures (resize-start, pointer-down move-arm, click/razor-split) into createClipGestureHandlers — one factory call per rendered clip instead of ~120 lines of inline handler bodies in the render loop. 529 lines now. * fix(studio): split the extracted pointerdown handler under the CRAP threshold Moving the ~120-line gesture logic into timelineClipGestureHandlers.ts concentrated it into two functions fallow flagged (onPointerDown at CRAP 63.6, onResizeStart at 31.6). Split the decision logic (which gesture a pointerdown implies) into a pure resolvePointerDownAction, then split its own intent-blocking check into isIntentBlocked. onResizeStart's guard moved into canStartResize. Every function now scores under 30. * fix(studio): drop the unused DomEditSelection import in PropertyPanelFlat CI caught it on PR #3026 (wa-12-panel-params); a later refactor in the stack removed the last use of the type here without removing the import. * fix(studio): close the typecheck and fallow gaps wa-18b-reschedule opened useAutomationLanes.ts's write() assumed gesture-scoped coalescing and a preview-only commit that useDomEditAttributeCommits.ts never grew — backported that option support from its own later commit so the two sides of the API agree. The paste path and its tests were missing the box selection's v0/v1 bounds a sibling commit added to AutomationSelection. The FX panel's carve controls still edited the six mechanism numbers (maxCutDb, bands, intelligibilityBias) after carveProfile() collapsed authoring to one Strength knob, so those fields no longer existed on HfCarveSettings; UI now edits strength, and analyseCarveBands is called with carveProfile(strength). Also closes fallow's complexity, dead-code and duplication findings on this PR's diff: extracted automationLaneDragMath.ts (pure group/point-move math) and useAutomationRangeDrag.ts (the marquee-select gesture) out of useAutomationLaneGestures.ts, pulled a couple of render-loop ternaries and a resolver into named functions, dropped an export nothing outside its file used, and shared a step-simplifier between audioCarve's two envelope builders. The edge-stretch vs. box-select priority test in TimelineAutomationLane.test was still pinning the pre-box-select rule (edge wins over a point sitting on it) that a sibling commit deliberately reversed — a point inside the box is now selected content, so grabbing it drags the group instead. Updated the test to the shipped rule instead of the old one. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): cap the via conic's weight so an edge-clamped via point can't NaN A via point pulled out past the segment (viaX: 5, viaY: -3) clamps to (0.999, 0.001) — exactly on the steady region's edge, where edge - viaX is 0. viaConic divided by that zero to get an infinite weight, and shapeVia turned Infinity into NaN a few steps later (Infinity - Infinity in the quadratic coefficient). NaN reaching setValueCurveAtTime silences the automated parameter for the rest of the render. Capped the weight at 1e6 instead of leaving it unbounded — past that point the arc already reads as touching the via point, so nothing visible is lost. Also hardened shapeVia's existing denominator guard (`<= 0`) to `!(> 0)`, since NaN fails the original comparison and fell through it. Review by Miga (PR #3208). * fix(studio-server): fingerprint the proactive waveform cache key too The route already keys the waveform cache on the asset's size and mtime as well as its path, so a rebuilt-in-place file gets fresh peaks instead of stale ones. generateWaveformCache — the proactive path that runs on upload — still called buildWaveformCacheKey with the path alone, so it wrote to a different key than the route reads from (making the pre-generated cache never found) and kept the exact collision bug this fingerprint exists to fix on its own path. Review by Miga (PR #3211). * style(docs): run oxfmt on the /hyperframes-audio skill docs Table column widths had drifted out of alignment with oxfmt's own rules, failing format:check and blocking the Preflight gate every downstream branch inherits. Whitespace only, no content change. * fix(core): stop \b from missing underscore-separated names, guard clipsOverlap's negative duration \b treats `_` as a word character, so \bbed\b never matched bed_01, music_bed_loop, or theme_song, and \bvo\b/\bvox\b/\btts\b had the same gap — an underscore-separated bed classified as "unknown" and could end up offered as its own carve source. Replaced the short hints with a boundary that actually excludes letters and digits on both sides. clipsOverlap computed end = start + duration without guarding sign, so a negative duration put end before start — an interval that does not describe anything, and one specific case showed it silently dropping a real overlap (a shorter, earlier broken end rejected a clip that genuinely contained the point). Duration clamps to zero instead: a clip cannot un-play time, and a zero-length clip at its start is the sane reading of "duration nobody wrote down as positive." Review by Miga (PR #3212). * fix(studio): widen PropertyPanel's resetModules render timeout again The 20s margin (already once widened for the same reason) is timing out in CI's full-monorepo Test run — the resetModules()+fresh-import render this test needs is uncached and competes with every other package's test suite for the same worker pool, and the same test passes in well under 2s standalone. Went to 45s rather than re-tuning to whatever number happens to clear the current CI load, since that number moves every time CI gains a package. * fix(studio): stop the single-candidate auto-apply carve firing twice Two auto-apply effects both fire when sourceOptions.length === 1: the multi-candidate effect only guards length === 0, so a single candidate passes it too, and the single-candidate effect passes its own guard right after — both compute the same sources list and both call setCarve, so the common case (one narrator, one bed) triggered two decodes, two FFT runs, and two concurrent attribute writes for one decision. The multi-candidate effect now defers to its sibling for exactly one candidate, which already has its own detailed handling for that case. Review by Miga (PR #3213). * feat(core): carve against every voice over a bed, always (#3212) * feat(core): carve against every voice over a bed, always dynamically A bed usually runs under a whole sequence — a narrator, an interview answer, a second presenter — and carving against one of them left the others fighting it. `source` becomes `sources`, and `mixCarveSources` sums every voice onto the BED's clock before anything is measured. That is what keeps one analysis sufficient: the chain is fixed, so there is no per-voice filter to switch between, and bands drawn from all the speech there is with envelopes that rise wherever any of it happens answer the actual question — where and when is speech masking this bed. Summed rather than averaged: two people talking at once mask more than either alone. Audio before the bed starts is dropped rather than folded in at zero, since it plays over nothing and shifting it would put a cut where there is no voice. `dynamic` is gone. A fixed depth thins the bed through every pause, and once both have been heard there is no reason to want it, so every carve follows the speech. Two helpers the panel and the headless script now share instead of each carrying a copy — two definitions of "what does this name suggest" drift, and then the two disagree about which track is the voice: - `classifyAudioName` reads a track's kind from its id and filename together. `unknown` is deliberately common: treating an unrecognised name as "not a voice" would hide the one track somebody needs to pick. - `clipsOverlap` keeps out a voice that never plays while the bed does. An unwritten duration counts as unbounded, not zero — refusing a clip whose length the composition leaves to the media would drop the commonest case there is. Files written before this still load: a single `source` reads as a one-voice list, a stored `dynamic` is ignored, and an absent attribute means the defaults whole. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): stop \b from missing underscore-separated names, guard clipsOverlap's negative duration \b treats `_` as a word character, so \bbed\b never matched bed_01, music_bed_loop, or theme_song, and \bvo\b/\bvox\b/\btts\b had the same gap — an underscore-separated bed classified as "unknown" and could end up offered as its own carve source. Replaced the short hints with a boundary that actually excludes letters and digits on both sides. clipsOverlap computed end = start + duration without guarding sign, so a negative duration put end before start — an interval that does not describe anything, and one specific case showed it silently dropping a real overlap (a shorter, earlier broken end rejected a clip that genuinely contained the point). Duration clamps to zero instead: a clip cannot un-play time, and a zero-length clip at its start is the sane reading of "duration nobody wrote down as positive." Review by Miga (PR #3212). --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(studio): port the carve UI off the removed source/dynamic fields #3212 (accidentally squash-merged into this branch instead of main) changed HfCarveSettings from a single `source` + `dynamic` toggle to a `sources` list with dynamic mode removed outright — the multi-voice UI consumer that goes with that shape lands in the very next PR, so this branch was left with a type that no longer matched its own code. Minimal port, not the multi-voice redesign that PR does properly: the "Listen to" picker and analyse() treat sources[0] as the one voice this UI still understands, and every dynamic-mode branch (the automated envelope lanes, the toggle, the checkbox) is gone along with the field — a carve is now always the static value the analysis computes, matching what the type change made permanent. Test suite trimmed the same way: the automation-lane and toggle tests covered behavior that no longer exists. * fix(cli): stop render.test.ts from downloading a real browser The "render command explicit composition" test drives the full render.js command handler, which takes the plan-based execute.ts path instead of the renderLocal path the other tests in this file exercise. That path calls ensureBrowser directly, bypassing the mocked preflight.js, and performs a real network install of chrome-headless-shell into the shared ~/.cache/hyperframes/chrome cache as a side effect of running the test suite. In CI this raced with the engine's audioFxRender browser tests running in a parallel worker against the same HOME, producing an intermittent EACCES on the partially-installed binary. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>

…e FFT scratch (#3175) * fix(core): remove the build-audio-fx-runtime.ts stray resurrected by a main merge An earlier merge with main brought this deleted file back (git's merge/delete handling on an unchanged-on-one-side file); package.json already points at build-inline-artifact.ts, so it sat unreachable and duplicating that file's config, both of which fallow flagged. * fix(studio): pull TimelineLanes under the 600-line cap TimelineLanes.tsx hit 620 lines. Extracted the three per-clip pointer gestures (resize-start, pointer-down move-arm, click/razor-split) into createClipGestureHandlers — one factory call per rendered clip instead of ~120 lines of inline handler bodies in the render loop. 529 lines now. * fix(studio): split the extracted pointerdown handler under the CRAP threshold Moving the ~120-line gesture logic into timelineClipGestureHandlers.ts concentrated it into two functions fallow flagged (onPointerDown at CRAP 63.6, onResizeStart at 31.6). Split the decision logic (which gesture a pointerdown implies) into a pure resolvePointerDownAction, then split its own intent-blocking check into isIntentBlocked. onResizeStart's guard moved into canStartResize. Every function now scores under 30. * fix(studio): drop the unused DomEditSelection import in PropertyPanelFlat CI caught it on PR #3026 (wa-12-panel-params); a later refactor in the stack removed the last use of the type here without removing the import. * fix(studio): close the typecheck and fallow gaps wa-18b-reschedule opened useAutomationLanes.ts's write() assumed gesture-scoped coalescing and a preview-only commit that useDomEditAttributeCommits.ts never grew — backported that option support from its own later commit so the two sides of the API agree. The paste path and its tests were missing the box selection's v0/v1 bounds a sibling commit added to AutomationSelection. The FX panel's carve controls still edited the six mechanism numbers (maxCutDb, bands, intelligibilityBias) after carveProfile() collapsed authoring to one Strength knob, so those fields no longer existed on HfCarveSettings; UI now edits strength, and analyseCarveBands is called with carveProfile(strength). Also closes fallow's complexity, dead-code and duplication findings on this PR's diff: extracted automationLaneDragMath.ts (pure group/point-move math) and useAutomationRangeDrag.ts (the marquee-select gesture) out of useAutomationLaneGestures.ts, pulled a couple of render-loop ternaries and a resolver into named functions, dropped an export nothing outside its file used, and shared a step-simplifier between audioCarve's two envelope builders. The edge-stretch vs. box-select priority test in TimelineAutomationLane.test was still pinning the pre-box-select rule (edge wins over a point sitting on it) that a sibling commit deliberately reversed — a point inside the box is now selected content, so grabbing it drags the group instead. Updated the test to the shipped rule instead of the old one. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): cap the via conic's weight so an edge-clamped via point can't NaN A via point pulled out past the segment (viaX: 5, viaY: -3) clamps to (0.999, 0.001) — exactly on the steady region's edge, where edge - viaX is 0. viaConic divided by that zero to get an infinite weight, and shapeVia turned Infinity into NaN a few steps later (Infinity - Infinity in the quadratic coefficient). NaN reaching setValueCurveAtTime silences the automated parameter for the rest of the render. Capped the weight at 1e6 instead of leaving it unbounded — past that point the arc already reads as touching the via point, so nothing visible is lost. Also hardened shapeVia's existing denominator guard (`<= 0`) to `!(> 0)`, since NaN fails the original comparison and fell through it. Review by Miga (PR #3208). * fix(studio-server): fingerprint the proactive waveform cache key too The route already keys the waveform cache on the asset's size and mtime as well as its path, so a rebuilt-in-place file gets fresh peaks instead of stale ones. generateWaveformCache — the proactive path that runs on upload — still called buildWaveformCacheKey with the path alone, so it wrote to a different key than the route reads from (making the pre-generated cache never found) and kept the exact collision bug this fingerprint exists to fix on its own path. Review by Miga (PR #3211). * style(docs): run oxfmt on the /hyperframes-audio skill docs Table column widths had drifted out of alignment with oxfmt's own rules, failing format:check and blocking the Preflight gate every downstream branch inherits. Whitespace only, no content change. * fix(core): stop \b from missing underscore-separated names, guard clipsOverlap's negative duration \b treats `_` as a word character, so \bbed\b never matched bed_01, music_bed_loop, or theme_song, and \bvo\b/\bvox\b/\btts\b had the same gap — an underscore-separated bed classified as "unknown" and could end up offered as its own carve source. Replaced the short hints with a boundary that actually excludes letters and digits on both sides. clipsOverlap computed end = start + duration without guarding sign, so a negative duration put end before start — an interval that does not describe anything, and one specific case showed it silently dropping a real overlap (a shorter, earlier broken end rejected a clip that genuinely contained the point). Duration clamps to zero instead: a clip cannot un-play time, and a zero-length clip at its start is the sane reading of "duration nobody wrote down as positive." Review by Miga (PR #3212). * fix(studio): widen PropertyPanel's resetModules render timeout again The 20s margin (already once widened for the same reason) is timing out in CI's full-monorepo Test run — the resetModules()+fresh-import render this test needs is uncached and competes with every other package's test suite for the same worker pool, and the same test passes in well under 2s standalone. Went to 45s rather than re-tuning to whatever number happens to clear the current CI load, since that number moves every time CI gains a package. * fix(studio): stop the single-candidate auto-apply carve firing twice Two auto-apply effects both fire when sourceOptions.length === 1: the multi-candidate effect only guards length === 0, so a single candidate passes it too, and the single-candidate effect passes its own guard right after — both compute the same sources list and both call setCarve, so the common case (one narrator, one bed) triggered two decodes, two FFT runs, and two concurrent attribute writes for one decision. The multi-candidate effect now defers to its sibling for exactly one candidate, which already has its own detailed handling for that case. Review by Miga (PR #3213). * feat(core): carve against every voice over a bed, always (#3212) * feat(core): carve against every voice over a bed, always dynamically A bed usually runs under a whole sequence — a narrator, an interview answer, a second presenter — and carving against one of them left the others fighting it. `source` becomes `sources`, and `mixCarveSources` sums every voice onto the BED's clock before anything is measured. That is what keeps one analysis sufficient: the chain is fixed, so there is no per-voice filter to switch between, and bands drawn from all the speech there is with envelopes that rise wherever any of it happens answer the actual question — where and when is speech masking this bed. Summed rather than averaged: two people talking at once mask more than either alone. Audio before the bed starts is dropped rather than folded in at zero, since it plays over nothing and shifting it would put a cut where there is no voice. `dynamic` is gone. A fixed depth thins the bed through every pause, and once both have been heard there is no reason to want it, so every carve follows the speech. Two helpers the panel and the headless script now share instead of each carrying a copy — two definitions of "what does this name suggest" drift, and then the two disagree about which track is the voice: - `classifyAudioName` reads a track's kind from its id and filename together. `unknown` is deliberately common: treating an unrecognised name as "not a voice" would hide the one track somebody needs to pick. - `clipsOverlap` keeps out a voice that never plays while the bed does. An unwritten duration counts as unbounded, not zero — refusing a clip whose length the composition leaves to the media would drop the commonest case there is. Files written before this still load: a single `source` reads as a one-voice list, a stored `dynamic` is ignored, and an absent attribute means the defaults whole. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): stop \b from missing underscore-separated names, guard clipsOverlap's negative duration \b treats `_` as a word character, so \bbed\b never matched bed_01, music_bed_loop, or theme_song, and \bvo\b/\bvox\b/\btts\b had the same gap — an underscore-separated bed classified as "unknown" and could end up offered as its own carve source. Replaced the short hints with a boundary that actually excludes letters and digits on both sides. clipsOverlap computed end = start + duration without guarding sign, so a negative duration put end before start — an interval that does not describe anything, and one specific case showed it silently dropping a real overlap (a shorter, earlier broken end rejected a clip that genuinely contained the point). Duration clamps to zero instead: a clip cannot un-play time, and a zero-length clip at its start is the sane reading of "duration nobody wrote down as positive." Review by Miga (PR #3212). --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(studio): port the carve UI off the removed source/dynamic fields #3212 (accidentally squash-merged into this branch instead of main) changed HfCarveSettings from a single `source` + `dynamic` toggle to a `sources` list with dynamic mode removed outright — the multi-voice UI consumer that goes with that shape lands in the very next PR, so this branch was left with a type that no longer matched its own code. Minimal port, not the multi-voice redesign that PR does properly: the "Listen to" picker and analyse() treat sources[0] as the one voice this UI still understands, and every dynamic-mode branch (the automated envelope lanes, the toggle, the checkbox) is gone along with the field — a carve is now always the static value the analysis computes, matching what the type change made permanent. Test suite trimmed the same way: the automation-lane and toggle tests covered behavior that no longer exists. --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>

…ind the rack (#3176) * fix(core): remove the build-audio-fx-runtime.ts stray resurrected by a main merge An earlier merge with main brought this deleted file back (git's merge/delete handling on an unchanged-on-one-side file); package.json already points at build-inline-artifact.ts, so it sat unreachable and duplicating that file's config, both of which fallow flagged. * fix(studio): pull TimelineLanes under the 600-line cap TimelineLanes.tsx hit 620 lines. Extracted the three per-clip pointer gestures (resize-start, pointer-down move-arm, click/razor-split) into createClipGestureHandlers — one factory call per rendered clip instead of ~120 lines of inline handler bodies in the render loop. 529 lines now. * fix(studio): split the extracted pointerdown handler under the CRAP threshold Moving the ~120-line gesture logic into timelineClipGestureHandlers.ts concentrated it into two functions fallow flagged (onPointerDown at CRAP 63.6, onResizeStart at 31.6). Split the decision logic (which gesture a pointerdown implies) into a pure resolvePointerDownAction, then split its own intent-blocking check into isIntentBlocked. onResizeStart's guard moved into canStartResize. Every function now scores under 30. * fix(studio): drop the unused DomEditSelection import in PropertyPanelFlat CI caught it on PR #3026 (wa-12-panel-params); a later refactor in the stack removed the last use of the type here without removing the import. * fix(studio): close the typecheck and fallow gaps wa-18b-reschedule opened useAutomationLanes.ts's write() assumed gesture-scoped coalescing and a preview-only commit that useDomEditAttributeCommits.ts never grew — backported that option support from its own later commit so the two sides of the API agree. The paste path and its tests were missing the box selection's v0/v1 bounds a sibling commit added to AutomationSelection. The FX panel's carve controls still edited the six mechanism numbers (maxCutDb, bands, intelligibilityBias) after carveProfile() collapsed authoring to one Strength knob, so those fields no longer existed on HfCarveSettings; UI now edits strength, and analyseCarveBands is called with carveProfile(strength). Also closes fallow's complexity, dead-code and duplication findings on this PR's diff: extracted automationLaneDragMath.ts (pure group/point-move math) and useAutomationRangeDrag.ts (the marquee-select gesture) out of useAutomationLaneGestures.ts, pulled a couple of render-loop ternaries and a resolver into named functions, dropped an export nothing outside its file used, and shared a step-simplifier between audioCarve's two envelope builders. The edge-stretch vs. box-select priority test in TimelineAutomationLane.test was still pinning the pre-box-select rule (edge wins over a point sitting on it) that a sibling commit deliberately reversed — a point inside the box is now selected content, so grabbing it drags the group instead. Updated the test to the shipped rule instead of the old one. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): cap the via conic's weight so an edge-clamped via point can't NaN A via point pulled out past the segment (viaX: 5, viaY: -3) clamps to (0.999, 0.001) — exactly on the steady region's edge, where edge - viaX is 0. viaConic divided by that zero to get an infinite weight, and shapeVia turned Infinity into NaN a few steps later (Infinity - Infinity in the quadratic coefficient). NaN reaching setValueCurveAtTime silences the automated parameter for the rest of the render. Capped the weight at 1e6 instead of leaving it unbounded — past that point the arc already reads as touching the via point, so nothing visible is lost. Also hardened shapeVia's existing denominator guard (`<= 0`) to `!(> 0)`, since NaN fails the original comparison and fell through it. Review by Miga (PR #3208). * fix(studio-server): fingerprint the proactive waveform cache key too The route already keys the waveform cache on the asset's size and mtime as well as its path, so a rebuilt-in-place file gets fresh peaks instead of stale ones. generateWaveformCache — the proactive path that runs on upload — still called buildWaveformCacheKey with the path alone, so it wrote to a different key than the route reads from (making the pre-generated cache never found) and kept the exact collision bug this fingerprint exists to fix on its own path. Review by Miga (PR #3211). * style(docs): run oxfmt on the /hyperframes-audio skill docs Table column widths had drifted out of alignment with oxfmt's own rules, failing format:check and blocking the Preflight gate every downstream branch inherits. Whitespace only, no content change. * fix(core): stop \b from missing underscore-separated names, guard clipsOverlap's negative duration \b treats `_` as a word character, so \bbed\b never matched bed_01, music_bed_loop, or theme_song, and \bvo\b/\bvox\b/\btts\b had the same gap — an underscore-separated bed classified as "unknown" and could end up offered as its own carve source. Replaced the short hints with a boundary that actually excludes letters and digits on both sides. clipsOverlap computed end = start + duration without guarding sign, so a negative duration put end before start — an interval that does not describe anything, and one specific case showed it silently dropping a real overlap (a shorter, earlier broken end rejected a clip that genuinely contained the point). Duration clamps to zero instead: a clip cannot un-play time, and a zero-length clip at its start is the sane reading of "duration nobody wrote down as positive." Review by Miga (PR #3212). * fix(studio): widen PropertyPanel's resetModules render timeout again The 20s margin (already once widened for the same reason) is timing out in CI's full-monorepo Test run — the resetModules()+fresh-import render this test needs is uncached and competes with every other package's test suite for the same worker pool, and the same test passes in well under 2s standalone. Went to 45s rather than re-tuning to whatever number happens to clear the current CI load, since that number moves every time CI gains a package. * fix(studio): stop the single-candidate auto-apply carve firing twice Two auto-apply effects both fire when sourceOptions.length === 1: the multi-candidate effect only guards length === 0, so a single candidate passes it too, and the single-candidate effect passes its own guard right after — both compute the same sources list and both call setCarve, so the common case (one narrator, one bed) triggered two decodes, two FFT runs, and two concurrent attribute writes for one decision. The multi-candidate effect now defers to its sibling for exactly one candidate, which already has its own detailed handling for that case. Review by Miga (PR #3213). * feat(core): carve against every voice over a bed, always (#3212) * feat(core): carve against every voice over a bed, always dynamically A bed usually runs under a whole sequence — a narrator, an interview answer, a second presenter — and carving against one of them left the others fighting it. `source` becomes `sources`, and `mixCarveSources` sums every voice onto the BED's clock before anything is measured. That is what keeps one analysis sufficient: the chain is fixed, so there is no per-voice filter to switch between, and bands drawn from all the speech there is with envelopes that rise wherever any of it happens answer the actual question — where and when is speech masking this bed. Summed rather than averaged: two people talking at once mask more than either alone. Audio before the bed starts is dropped rather than folded in at zero, since it plays over nothing and shifting it would put a cut where there is no voice. `dynamic` is gone. A fixed depth thins the bed through every pause, and once both have been heard there is no reason to want it, so every carve follows the speech. Two helpers the panel and the headless script now share instead of each carrying a copy — two definitions of "what does this name suggest" drift, and then the two disagree about which track is the voice: - `classifyAudioName` reads a track's kind from its id and filename together. `unknown` is deliberately common: treating an unrecognised name as "not a voice" would hide the one track somebody needs to pick. - `clipsOverlap` keeps out a voice that never plays while the bed does. An unwritten duration counts as unbounded, not zero — refusing a clip whose length the composition leaves to the media would drop the commonest case there is. Files written before this still load: a single `source` reads as a one-voice list, a stored `dynamic` is ignored, and an absent attribute means the defaults whole. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): stop \b from missing underscore-separated names, guard clipsOverlap's negative duration \b treats `_` as a word character, so \bbed\b never matched bed_01, music_bed_loop, or theme_song, and \bvo\b/\bvox\b/\btts\b had the same gap — an underscore-separated bed classified as "unknown" and could end up offered as its own carve source. Replaced the short hints with a boundary that actually excludes letters and digits on both sides. clipsOverlap computed end = start + duration without guarding sign, so a negative duration put end before start — an interval that does not describe anything, and one specific case showed it silently dropping a real overlap (a shorter, earlier broken end rejected a clip that genuinely contained the point). Duration clamps to zero instead: a clip cannot un-play time, and a zero-length clip at its start is the sane reading of "duration nobody wrote down as positive." Review by Miga (PR #3212). --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(studio): port the carve UI off the removed source/dynamic fields #3212 (accidentally squash-merged into this branch instead of main) changed HfCarveSettings from a single `source` + `dynamic` toggle to a `sources` list with dynamic mode removed outright — the multi-voice UI consumer that goes with that shape lands in the very next PR, so this branch was left with a type that no longer matched its own code. Minimal port, not the multi-voice redesign that PR does properly: the "Listen to" picker and analyse() treat sources[0] as the one voice this UI still understands, and every dynamic-mode branch (the automated envelope lanes, the toggle, the checkbox) is gone along with the field — a carve is now always the static value the analysis computes, matching what the type change made permanent. Test suite trimmed the same way: the automation-lane and toggle tests covered behavior that no longer exists. * docs(plans): fix pre-existing oxfmt formatting drift in audio-fx-presets Blocks the regression workflow's required preflight gate. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>

…rack (#3177) * fix(core): remove the build-audio-fx-runtime.ts stray resurrected by a main merge An earlier merge with main brought this deleted file back (git's merge/delete handling on an unchanged-on-one-side file); package.json already points at build-inline-artifact.ts, so it sat unreachable and duplicating that file's config, both of which fallow flagged. * fix(studio): pull TimelineLanes under the 600-line cap TimelineLanes.tsx hit 620 lines. Extracted the three per-clip pointer gestures (resize-start, pointer-down move-arm, click/razor-split) into createClipGestureHandlers — one factory call per rendered clip instead of ~120 lines of inline handler bodies in the render loop. 529 lines now. * fix(studio): split the extracted pointerdown handler under the CRAP threshold Moving the ~120-line gesture logic into timelineClipGestureHandlers.ts concentrated it into two functions fallow flagged (onPointerDown at CRAP 63.6, onResizeStart at 31.6). Split the decision logic (which gesture a pointerdown implies) into a pure resolvePointerDownAction, then split its own intent-blocking check into isIntentBlocked. onResizeStart's guard moved into canStartResize. Every function now scores under 30. * fix(studio): drop the unused DomEditSelection import in PropertyPanelFlat CI caught it on PR #3026 (wa-12-panel-params); a later refactor in the stack removed the last use of the type here without removing the import. * fix(studio): close the typecheck and fallow gaps wa-18b-reschedule opened useAutomationLanes.ts's write() assumed gesture-scoped coalescing and a preview-only commit that useDomEditAttributeCommits.ts never grew — backported that option support from its own later commit so the two sides of the API agree. The paste path and its tests were missing the box selection's v0/v1 bounds a sibling commit added to AutomationSelection. The FX panel's carve controls still edited the six mechanism numbers (maxCutDb, bands, intelligibilityBias) after carveProfile() collapsed authoring to one Strength knob, so those fields no longer existed on HfCarveSettings; UI now edits strength, and analyseCarveBands is called with carveProfile(strength). Also closes fallow's complexity, dead-code and duplication findings on this PR's diff: extracted automationLaneDragMath.ts (pure group/point-move math) and useAutomationRangeDrag.ts (the marquee-select gesture) out of useAutomationLaneGestures.ts, pulled a couple of render-loop ternaries and a resolver into named functions, dropped an export nothing outside its file used, and shared a step-simplifier between audioCarve's two envelope builders. The edge-stretch vs. box-select priority test in TimelineAutomationLane.test was still pinning the pre-box-select rule (edge wins over a point sitting on it) that a sibling commit deliberately reversed — a point inside the box is now selected content, so grabbing it drags the group instead. Updated the test to the shipped rule instead of the old one. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): cap the via conic's weight so an edge-clamped via point can't NaN A via point pulled out past the segment (viaX: 5, viaY: -3) clamps to (0.999, 0.001) — exactly on the steady region's edge, where edge - viaX is 0. viaConic divided by that zero to get an infinite weight, and shapeVia turned Infinity into NaN a few steps later (Infinity - Infinity in the quadratic coefficient). NaN reaching setValueCurveAtTime silences the automated parameter for the rest of the render. Capped the weight at 1e6 instead of leaving it unbounded — past that point the arc already reads as touching the via point, so nothing visible is lost. Also hardened shapeVia's existing denominator guard (`<= 0`) to `!(> 0)`, since NaN fails the original comparison and fell through it. Review by Miga (PR #3208). * fix(studio-server): fingerprint the proactive waveform cache key too The route already keys the waveform cache on the asset's size and mtime as well as its path, so a rebuilt-in-place file gets fresh peaks instead of stale ones. generateWaveformCache — the proactive path that runs on upload — still called buildWaveformCacheKey with the path alone, so it wrote to a different key than the route reads from (making the pre-generated cache never found) and kept the exact collision bug this fingerprint exists to fix on its own path. Review by Miga (PR #3211). * style(docs): run oxfmt on the /hyperframes-audio skill docs Table column widths had drifted out of alignment with oxfmt's own rules, failing format:check and blocking the Preflight gate every downstream branch inherits. Whitespace only, no content change. * fix(core): stop \b from missing underscore-separated names, guard clipsOverlap's negative duration \b treats `_` as a word character, so \bbed\b never matched bed_01, music_bed_loop, or theme_song, and \bvo\b/\bvox\b/\btts\b had the same gap — an underscore-separated bed classified as "unknown" and could end up offered as its own carve source. Replaced the short hints with a boundary that actually excludes letters and digits on both sides. clipsOverlap computed end = start + duration without guarding sign, so a negative duration put end before start — an interval that does not describe anything, and one specific case showed it silently dropping a real overlap (a shorter, earlier broken end rejected a clip that genuinely contained the point). Duration clamps to zero instead: a clip cannot un-play time, and a zero-length clip at its start is the sane reading of "duration nobody wrote down as positive." Review by Miga (PR #3212). * fix(studio): widen PropertyPanel's resetModules render timeout again The 20s margin (already once widened for the same reason) is timing out in CI's full-monorepo Test run — the resetModules()+fresh-import render this test needs is uncached and competes with every other package's test suite for the same worker pool, and the same test passes in well under 2s standalone. Went to 45s rather than re-tuning to whatever number happens to clear the current CI load, since that number moves every time CI gains a package. * fix(studio): stop the single-candidate auto-apply carve firing twice Two auto-apply effects both fire when sourceOptions.length === 1: the multi-candidate effect only guards length === 0, so a single candidate passes it too, and the single-candidate effect passes its own guard right after — both compute the same sources list and both call setCarve, so the common case (one narrator, one bed) triggered two decodes, two FFT runs, and two concurrent attribute writes for one decision. The multi-candidate effect now defers to its sibling for exactly one candidate, which already has its own detailed handling for that case. Review by Miga (PR #3213). * feat(core): carve against every voice over a bed, always (#3212) * feat(core): carve against every voice over a bed, always dynamically A bed usually runs under a whole sequence — a narrator, an interview answer, a second presenter — and carving against one of them left the others fighting it. `source` becomes `sources`, and `mixCarveSources` sums every voice onto the BED's clock before anything is measured. That is what keeps one analysis sufficient: the chain is fixed, so there is no per-voice filter to switch between, and bands drawn from all the speech there is with envelopes that rise wherever any of it happens answer the actual question — where and when is speech masking this bed. Summed rather than averaged: two people talking at once mask more than either alone. Audio before the bed starts is dropped rather than folded in at zero, since it plays over nothing and shifting it would put a cut where there is no voice. `dynamic` is gone. A fixed depth thins the bed through every pause, and once both have been heard there is no reason to want it, so every carve follows the speech. Two helpers the panel and the headless script now share instead of each carrying a copy — two definitions of "what does this name suggest" drift, and then the two disagree about which track is the voice: - `classifyAudioName` reads a track's kind from its id and filename together. `unknown` is deliberately common: treating an unrecognised name as "not a voice" would hide the one track somebody needs to pick. - `clipsOverlap` keeps out a voice that never plays while the bed does. An unwritten duration counts as unbounded, not zero — refusing a clip whose length the composition leaves to the media would drop the commonest case there is. Files written before this still load: a single `source` reads as a one-voice list, a stored `dynamic` is ignored, and an absent attribute means the defaults whole. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): stop \b from missing underscore-separated names, guard clipsOverlap's negative duration \b treats `_` as a word character, so \bbed\b never matched bed_01, music_bed_loop, or theme_song, and \bvo\b/\bvox\b/\btts\b had the same gap — an underscore-separated bed classified as "unknown" and could end up offered as its own carve source. Replaced the short hints with a boundary that actually excludes letters and digits on both sides. clipsOverlap computed end = start + duration without guarding sign, so a negative duration put end before start — an interval that does not describe anything, and one specific case showed it silently dropping a real overlap (a shorter, earlier broken end rejected a clip that genuinely contained the point). Duration clamps to zero instead: a clip cannot un-play time, and a zero-length clip at its start is the sane reading of "duration nobody wrote down as positive." Review by Miga (PR #3212). --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(studio): port the carve UI off the removed source/dynamic fields #3212 (accidentally squash-merged into this branch instead of main) changed HfCarveSettings from a single `source` + `dynamic` toggle to a `sources` list with dynamic mode removed outright — the multi-voice UI consumer that goes with that shape lands in the very next PR, so this branch was left with a type that no longer matched its own code. Minimal port, not the multi-voice redesign that PR does properly: the "Listen to" picker and analyse() treat sources[0] as the one voice this UI still understands, and every dynamic-mode branch (the automated envelope lanes, the toggle, the checkbox) is gone along with the field — a carve is now always the static value the analysis computes, matching what the type change made permanent. Test suite trimmed the same way: the automation-lane and toggle tests covered behavior that no longer exists. * docs(plans): fix pre-existing oxfmt formatting drift in audio-fx-ux README Blocks the regression workflow's required preflight gate. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>

…ting filters (#3178) * fix(studio): pull TimelineLanes under the 600-line cap TimelineLanes.tsx hit 620 lines. Extracted the three per-clip pointer gestures (resize-start, pointer-down move-arm, click/razor-split) into createClipGestureHandlers — one factory call per rendered clip instead of ~120 lines of inline handler bodies in the render loop. 529 lines now. * fix(studio): split the extracted pointerdown handler under the CRAP threshold Moving the ~120-line gesture logic into timelineClipGestureHandlers.ts concentrated it into two functions fallow flagged (onPointerDown at CRAP 63.6, onResizeStart at 31.6). Split the decision logic (which gesture a pointerdown implies) into a pure resolvePointerDownAction, then split its own intent-blocking check into isIntentBlocked. onResizeStart's guard moved into canStartResize. Every function now scores under 30. * fix(studio): drop the unused DomEditSelection import in PropertyPanelFlat CI caught it on PR #3026 (wa-12-panel-params); a later refactor in the stack removed the last use of the type here without removing the import. * fix(studio): close the typecheck and fallow gaps wa-18b-reschedule opened useAutomationLanes.ts's write() assumed gesture-scoped coalescing and a preview-only commit that useDomEditAttributeCommits.ts never grew — backported that option support from its own later commit so the two sides of the API agree. The paste path and its tests were missing the box selection's v0/v1 bounds a sibling commit added to AutomationSelection. The FX panel's carve controls still edited the six mechanism numbers (maxCutDb, bands, intelligibilityBias) after carveProfile() collapsed authoring to one Strength knob, so those fields no longer existed on HfCarveSettings; UI now edits strength, and analyseCarveBands is called with carveProfile(strength). Also closes fallow's complexity, dead-code and duplication findings on this PR's diff: extracted automationLaneDragMath.ts (pure group/point-move math) and useAutomationRangeDrag.ts (the marquee-select gesture) out of useAutomationLaneGestures.ts, pulled a couple of render-loop ternaries and a resolver into named functions, dropped an export nothing outside its file used, and shared a step-simplifier between audioCarve's two envelope builders. The edge-stretch vs. box-select priority test in TimelineAutomationLane.test was still pinning the pre-box-select rule (edge wins over a point sitting on it) that a sibling commit deliberately reversed — a point inside the box is now selected content, so grabbing it drags the group instead. Updated the test to the shipped rule instead of the old one. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): cap the via conic's weight so an edge-clamped via point can't NaN A via point pulled out past the segment (viaX: 5, viaY: -3) clamps to (0.999, 0.001) — exactly on the steady region's edge, where edge - viaX is 0. viaConic divided by that zero to get an infinite weight, and shapeVia turned Infinity into NaN a few steps later (Infinity - Infinity in the quadratic coefficient). NaN reaching setValueCurveAtTime silences the automated parameter for the rest of the render. Capped the weight at 1e6 instead of leaving it unbounded — past that point the arc already reads as touching the via point, so nothing visible is lost. Also hardened shapeVia's existing denominator guard (`<= 0`) to `!(> 0)`, since NaN fails the original comparison and fell through it. Review by Miga (PR #3208). * fix(studio-server): fingerprint the proactive waveform cache key too The route already keys the waveform cache on the asset's size and mtime as well as its path, so a rebuilt-in-place file gets fresh peaks instead of stale ones. generateWaveformCache — the proactive path that runs on upload — still called buildWaveformCacheKey with the path alone, so it wrote to a different key than the route reads from (making the pre-generated cache never found) and kept the exact collision bug this fingerprint exists to fix on its own path. Review by Miga (PR #3211). * style(docs): run oxfmt on the /hyperframes-audio skill docs Table column widths had drifted out of alignment with oxfmt's own rules, failing format:check and blocking the Preflight gate every downstream branch inherits. Whitespace only, no content change. * fix(core): stop \b from missing underscore-separated names, guard clipsOverlap's negative duration \b treats `_` as a word character, so \bbed\b never matched bed_01, music_bed_loop, or theme_song, and \bvo\b/\bvox\b/\btts\b had the same gap — an underscore-separated bed classified as "unknown" and could end up offered as its own carve source. Replaced the short hints with a boundary that actually excludes letters and digits on both sides. clipsOverlap computed end = start + duration without guarding sign, so a negative duration put end before start — an interval that does not describe anything, and one specific case showed it silently dropping a real overlap (a shorter, earlier broken end rejected a clip that genuinely contained the point). Duration clamps to zero instead: a clip cannot un-play time, and a zero-length clip at its start is the sane reading of "duration nobody wrote down as positive." Review by Miga (PR #3212). * fix(studio): widen PropertyPanel's resetModules render timeout again The 20s margin (already once widened for the same reason) is timing out in CI's full-monorepo Test run — the resetModules()+fresh-import render this test needs is uncached and competes with every other package's test suite for the same worker pool, and the same test passes in well under 2s standalone. Went to 45s rather than re-tuning to whatever number happens to clear the current CI load, since that number moves every time CI gains a package. * fix(studio): stop the single-candidate auto-apply carve firing twice Two auto-apply effects both fire when sourceOptions.length === 1: the multi-candidate effect only guards length === 0, so a single candidate passes it too, and the single-candidate effect passes its own guard right after — both compute the same sources list and both call setCarve, so the common case (one narrator, one bed) triggered two decodes, two FFT runs, and two concurrent attribute writes for one decision. The multi-candidate effect now defers to its sibling for exactly one candidate, which already has its own detailed handling for that case. Review by Miga (PR #3213). * feat(core): carve against every voice over a bed, always (#3212) * feat(core): carve against every voice over a bed, always dynamically A bed usually runs under a whole sequence — a narrator, an interview answer, a second presenter — and carving against one of them left the others fighting it. `source` becomes `sources`, and `mixCarveSources` sums every voice onto the BED's clock before anything is measured. That is what keeps one analysis sufficient: the chain is fixed, so there is no per-voice filter to switch between, and bands drawn from all the speech there is with envelopes that rise wherever any of it happens answer the actual question — where and when is speech masking this bed. Summed rather than averaged: two people talking at once mask more than either alone. Audio before the bed starts is dropped rather than folded in at zero, since it plays over nothing and shifting it would put a cut where there is no voice. `dynamic` is gone. A fixed depth thins the bed through every pause, and once both have been heard there is no reason to want it, so every carve follows the speech. Two helpers the panel and the headless script now share instead of each carrying a copy — two definitions of "what does this name suggest" drift, and then the two disagree about which track is the voice: - `classifyAudioName` reads a track's kind from its id and filename together. `unknown` is deliberately common: treating an unrecognised name as "not a voice" would hide the one track somebody needs to pick. - `clipsOverlap` keeps out a voice that never plays while the bed does. An unwritten duration counts as unbounded, not zero — refusing a clip whose length the composition leaves to the media would drop the commonest case there is. Files written before this still load: a single `source` reads as a one-voice list, a stored `dynamic` is ignored, and an absent attribute means the defaults whole. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): stop \b from missing underscore-separated names, guard clipsOverlap's negative duration \b treats `_` as a word character, so \bbed\b never matched bed_01, music_bed_loop, or theme_song, and \bvo\b/\bvox\b/\btts\b had the same gap — an underscore-separated bed classified as "unknown" and could end up offered as its own carve source. Replaced the short hints with a boundary that actually excludes letters and digits on both sides. clipsOverlap computed end = start + duration without guarding sign, so a negative duration put end before start — an interval that does not describe anything, and one specific case showed it silently dropping a real overlap (a shorter, earlier broken end rejected a clip that genuinely contained the point). Duration clamps to zero instead: a clip cannot un-play time, and a zero-length clip at its start is the sane reading of "duration nobody wrote down as positive." Review by Miga (PR #3212). --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(studio): port the carve UI off the removed source/dynamic fields #3212 (accidentally squash-merged into this branch instead of main) changed HfCarveSettings from a single `source` + `dynamic` toggle to a `sources` list with dynamic mode removed outright — the multi-voice UI consumer that goes with that shape lands in the very next PR, so this branch was left with a type that no longer matched its own code. Minimal port, not the multi-voice redesign that PR does properly: the "Listen to" picker and analyse() treat sources[0] as the one voice this UI still understands, and every dynamic-mode branch (the automated envelope lanes, the toggle, the checkbox) is gone along with the field — a carve is now always the static value the analysis computes, matching what the type change made permanent. Test suite trimmed the same way: the automation-lane and toggle tests covered behavior that no longer exists. --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>

* fix(studio): pull TimelineLanes under the 600-line cap TimelineLanes.tsx hit 620 lines. Extracted the three per-clip pointer gestures (resize-start, pointer-down move-arm, click/razor-split) into createClipGestureHandlers — one factory call per rendered clip instead of ~120 lines of inline handler bodies in the render loop. 529 lines now. * fix(studio): split the extracted pointerdown handler under the CRAP threshold Moving the ~120-line gesture logic into timelineClipGestureHandlers.ts concentrated it into two functions fallow flagged (onPointerDown at CRAP 63.6, onResizeStart at 31.6). Split the decision logic (which gesture a pointerdown implies) into a pure resolvePointerDownAction, then split its own intent-blocking check into isIntentBlocked. onResizeStart's guard moved into canStartResize. Every function now scores under 30. * fix(studio): drop the unused DomEditSelection import in PropertyPanelFlat CI caught it on PR #3026 (wa-12-panel-params); a later refactor in the stack removed the last use of the type here without removing the import. * fix(studio): close the typecheck and fallow gaps wa-18b-reschedule opened useAutomationLanes.ts's write() assumed gesture-scoped coalescing and a preview-only commit that useDomEditAttributeCommits.ts never grew — backported that option support from its own later commit so the two sides of the API agree. The paste path and its tests were missing the box selection's v0/v1 bounds a sibling commit added to AutomationSelection. The FX panel's carve controls still edited the six mechanism numbers (maxCutDb, bands, intelligibilityBias) after carveProfile() collapsed authoring to one Strength knob, so those fields no longer existed on HfCarveSettings; UI now edits strength, and analyseCarveBands is called with carveProfile(strength). Also closes fallow's complexity, dead-code and duplication findings on this PR's diff: extracted automationLaneDragMath.ts (pure group/point-move math) and useAutomationRangeDrag.ts (the marquee-select gesture) out of useAutomationLaneGestures.ts, pulled a couple of render-loop ternaries and a resolver into named functions, dropped an export nothing outside its file used, and shared a step-simplifier between audioCarve's two envelope builders. The edge-stretch vs. box-select priority test in TimelineAutomationLane.test was still pinning the pre-box-select rule (edge wins over a point sitting on it) that a sibling commit deliberately reversed — a point inside the box is now selected content, so grabbing it drags the group instead. Updated the test to the shipped rule instead of the old one. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): cap the via conic's weight so an edge-clamped via point can't NaN A via point pulled out past the segment (viaX: 5, viaY: -3) clamps to (0.999, 0.001) — exactly on the steady region's edge, where edge - viaX is 0. viaConic divided by that zero to get an infinite weight, and shapeVia turned Infinity into NaN a few steps later (Infinity - Infinity in the quadratic coefficient). NaN reaching setValueCurveAtTime silences the automated parameter for the rest of the render. Capped the weight at 1e6 instead of leaving it unbounded — past that point the arc already reads as touching the via point, so nothing visible is lost. Also hardened shapeVia's existing denominator guard (`<= 0`) to `!(> 0)`, since NaN fails the original comparison and fell through it. Review by Miga (PR #3208). * fix(studio-server): fingerprint the proactive waveform cache key too The route already keys the waveform cache on the asset's size and mtime as well as its path, so a rebuilt-in-place file gets fresh peaks instead of stale ones. generateWaveformCache — the proactive path that runs on upload — still called buildWaveformCacheKey with the path alone, so it wrote to a different key than the route reads from (making the pre-generated cache never found) and kept the exact collision bug this fingerprint exists to fix on its own path. Review by Miga (PR #3211). * style(docs): run oxfmt on the /hyperframes-audio skill docs Table column widths had drifted out of alignment with oxfmt's own rules, failing format:check and blocking the Preflight gate every downstream branch inherits. Whitespace only, no content change. * fix(core): stop \b from missing underscore-separated names, guard clipsOverlap's negative duration \b treats `_` as a word character, so \bbed\b never matched bed_01, music_bed_loop, or theme_song, and \bvo\b/\bvox\b/\btts\b had the same gap — an underscore-separated bed classified as "unknown" and could end up offered as its own carve source. Replaced the short hints with a boundary that actually excludes letters and digits on both sides. clipsOverlap computed end = start + duration without guarding sign, so a negative duration put end before start — an interval that does not describe anything, and one specific case showed it silently dropping a real overlap (a shorter, earlier broken end rejected a clip that genuinely contained the point). Duration clamps to zero instead: a clip cannot un-play time, and a zero-length clip at its start is the sane reading of "duration nobody wrote down as positive." Review by Miga (PR #3212). * fix(studio): widen PropertyPanel's resetModules render timeout again The 20s margin (already once widened for the same reason) is timing out in CI's full-monorepo Test run — the resetModules()+fresh-import render this test needs is uncached and competes with every other package's test suite for the same worker pool, and the same test passes in well under 2s standalone. Went to 45s rather than re-tuning to whatever number happens to clear the current CI load, since that number moves every time CI gains a package. * fix(studio): stop the single-candidate auto-apply carve firing twice Two auto-apply effects both fire when sourceOptions.length === 1: the multi-candidate effect only guards length === 0, so a single candidate passes it too, and the single-candidate effect passes its own guard right after — both compute the same sources list and both call setCarve, so the common case (one narrator, one bed) triggered two decodes, two FFT runs, and two concurrent attribute writes for one decision. The multi-candidate effect now defers to its sibling for exactly one candidate, which already has its own detailed handling for that case. Review by Miga (PR #3213). * feat(core): carve against every voice over a bed, always (#3212) * feat(core): carve against every voice over a bed, always dynamically A bed usually runs under a whole sequence — a narrator, an interview answer, a second presenter — and carving against one of them left the others fighting it. `source` becomes `sources`, and `mixCarveSources` sums every voice onto the BED's clock before anything is measured. That is what keeps one analysis sufficient: the chain is fixed, so there is no per-voice filter to switch between, and bands drawn from all the speech there is with envelopes that rise wherever any of it happens answer the actual question — where and when is speech masking this bed. Summed rather than averaged: two people talking at once mask more than either alone. Audio before the bed starts is dropped rather than folded in at zero, since it plays over nothing and shifting it would put a cut where there is no voice. `dynamic` is gone. A fixed depth thins the bed through every pause, and once both have been heard there is no reason to want it, so every carve follows the speech. Two helpers the panel and the headless script now share instead of each carrying a copy — two definitions of "what does this name suggest" drift, and then the two disagree about which track is the voice: - `classifyAudioName` reads a track's kind from its id and filename together. `unknown` is deliberately common: treating an unrecognised name as "not a voice" would hide the one track somebody needs to pick. - `clipsOverlap` keeps out a voice that never plays while the bed does. An unwritten duration counts as unbounded, not zero — refusing a clip whose length the composition leaves to the media would drop the commonest case there is. Files written before this still load: a single `source` reads as a one-voice list, a stored `dynamic` is ignored, and an absent attribute means the defaults whole. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): stop \b from missing underscore-separated names, guard clipsOverlap's negative duration \b treats `_` as a word character, so \bbed\b never matched bed_01, music_bed_loop, or theme_song, and \bvo\b/\bvox\b/\btts\b had the same gap — an underscore-separated bed classified as "unknown" and could end up offered as its own carve source. Replaced the short hints with a boundary that actually excludes letters and digits on both sides. clipsOverlap computed end = start + duration without guarding sign, so a negative duration put end before start — an interval that does not describe anything, and one specific case showed it silently dropping a real overlap (a shorter, earlier broken end rejected a clip that genuinely contained the point). Duration clamps to zero instead: a clip cannot un-play time, and a zero-length clip at its start is the sane reading of "duration nobody wrote down as positive." Review by Miga (PR #3212). --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(studio): port the carve UI off the removed source/dynamic fields #3212 (accidentally squash-merged into this branch instead of main) changed HfCarveSettings from a single `source` + `dynamic` toggle to a `sources` list with dynamic mode removed outright — the multi-voice UI consumer that goes with that shape lands in the very next PR, so this branch was left with a type that no longer matched its own code. Minimal port, not the multi-voice redesign that PR does properly: the "Listen to" picker and analyse() treat sources[0] as the one voice this UI still understands, and every dynamic-mode branch (the automated envelope lanes, the toggle, the checkbox) is gone along with the field — a carve is now always the static value the analysis computes, matching what the type change made permanent. Test suite trimmed the same way: the automation-lane and toggle tests covered behavior that no longer exists. --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>

* fix(studio): drop the unused DomEditSelection import in PropertyPanelFlat CI caught it on PR #3026 (wa-12-panel-params); a later refactor in the stack removed the last use of the type here without removing the import. * fix(studio): close the typecheck and fallow gaps wa-18b-reschedule opened useAutomationLanes.ts's write() assumed gesture-scoped coalescing and a preview-only commit that useDomEditAttributeCommits.ts never grew — backported that option support from its own later commit so the two sides of the API agree. The paste path and its tests were missing the box selection's v0/v1 bounds a sibling commit added to AutomationSelection. The FX panel's carve controls still edited the six mechanism numbers (maxCutDb, bands, intelligibilityBias) after carveProfile() collapsed authoring to one Strength knob, so those fields no longer existed on HfCarveSettings; UI now edits strength, and analyseCarveBands is called with carveProfile(strength). Also closes fallow's complexity, dead-code and duplication findings on this PR's diff: extracted automationLaneDragMath.ts (pure group/point-move math) and useAutomationRangeDrag.ts (the marquee-select gesture) out of useAutomationLaneGestures.ts, pulled a couple of render-loop ternaries and a resolver into named functions, dropped an export nothing outside its file used, and shared a step-simplifier between audioCarve's two envelope builders. The edge-stretch vs. box-select priority test in TimelineAutomationLane.test was still pinning the pre-box-select rule (edge wins over a point sitting on it) that a sibling commit deliberately reversed — a point inside the box is now selected content, so grabbing it drags the group instead. Updated the test to the shipped rule instead of the old one. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): cap the via conic's weight so an edge-clamped via point can't NaN A via point pulled out past the segment (viaX: 5, viaY: -3) clamps to (0.999, 0.001) — exactly on the steady region's edge, where edge - viaX is 0. viaConic divided by that zero to get an infinite weight, and shapeVia turned Infinity into NaN a few steps later (Infinity - Infinity in the quadratic coefficient). NaN reaching setValueCurveAtTime silences the automated parameter for the rest of the render. Capped the weight at 1e6 instead of leaving it unbounded — past that point the arc already reads as touching the via point, so nothing visible is lost. Also hardened shapeVia's existing denominator guard (`<= 0`) to `!(> 0)`, since NaN fails the original comparison and fell through it. Review by Miga (PR #3208). * fix(studio-server): fingerprint the proactive waveform cache key too The route already keys the waveform cache on the asset's size and mtime as well as its path, so a rebuilt-in-place file gets fresh peaks instead of stale ones. generateWaveformCache — the proactive path that runs on upload — still called buildWaveformCacheKey with the path alone, so it wrote to a different key than the route reads from (making the pre-generated cache never found) and kept the exact collision bug this fingerprint exists to fix on its own path. Review by Miga (PR #3211). * style(docs): run oxfmt on the /hyperframes-audio skill docs Table column widths had drifted out of alignment with oxfmt's own rules, failing format:check and blocking the Preflight gate every downstream branch inherits. Whitespace only, no content change. * fix(core): stop \b from missing underscore-separated names, guard clipsOverlap's negative duration \b treats `_` as a word character, so \bbed\b never matched bed_01, music_bed_loop, or theme_song, and \bvo\b/\bvox\b/\btts\b had the same gap — an underscore-separated bed classified as "unknown" and could end up offered as its own carve source. Replaced the short hints with a boundary that actually excludes letters and digits on both sides. clipsOverlap computed end = start + duration without guarding sign, so a negative duration put end before start — an interval that does not describe anything, and one specific case showed it silently dropping a real overlap (a shorter, earlier broken end rejected a clip that genuinely contained the point). Duration clamps to zero instead: a clip cannot un-play time, and a zero-length clip at its start is the sane reading of "duration nobody wrote down as positive." Review by Miga (PR #3212). * fix(studio): widen PropertyPanel's resetModules render timeout again The 20s margin (already once widened for the same reason) is timing out in CI's full-monorepo Test run — the resetModules()+fresh-import render this test needs is uncached and competes with every other package's test suite for the same worker pool, and the same test passes in well under 2s standalone. Went to 45s rather than re-tuning to whatever number happens to clear the current CI load, since that number moves every time CI gains a package. * fix(studio): stop the single-candidate auto-apply carve firing twice Two auto-apply effects both fire when sourceOptions.length === 1: the multi-candidate effect only guards length === 0, so a single candidate passes it too, and the single-candidate effect passes its own guard right after — both compute the same sources list and both call setCarve, so the common case (one narrator, one bed) triggered two decodes, two FFT runs, and two concurrent attribute writes for one decision. The multi-candidate effect now defers to its sibling for exactly one candidate, which already has its own detailed handling for that case. Review by Miga (PR #3213). * feat(core): carve against every voice over a bed, always (#3212) * feat(core): carve against every voice over a bed, always dynamically A bed usually runs under a whole sequence — a narrator, an interview answer, a second presenter — and carving against one of them left the others fighting it. `source` becomes `sources`, and `mixCarveSources` sums every voice onto the BED's clock before anything is measured. That is what keeps one analysis sufficient: the chain is fixed, so there is no per-voice filter to switch between, and bands drawn from all the speech there is with envelopes that rise wherever any of it happens answer the actual question — where and when is speech masking this bed. Summed rather than averaged: two people talking at once mask more than either alone. Audio before the bed starts is dropped rather than folded in at zero, since it plays over nothing and shifting it would put a cut where there is no voice. `dynamic` is gone. A fixed depth thins the bed through every pause, and once both have been heard there is no reason to want it, so every carve follows the speech. Two helpers the panel and the headless script now share instead of each carrying a copy — two definitions of "what does this name suggest" drift, and then the two disagree about which track is the voice: - `classifyAudioName` reads a track's kind from its id and filename together. `unknown` is deliberately common: treating an unrecognised name as "not a voice" would hide the one track somebody needs to pick. - `clipsOverlap` keeps out a voice that never plays while the bed does. An unwritten duration counts as unbounded, not zero — refusing a clip whose length the composition leaves to the media would drop the commonest case there is. Files written before this still load: a single `source` reads as a one-voice list, a stored `dynamic` is ignored, and an absent attribute means the defaults whole. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): stop \b from missing underscore-separated names, guard clipsOverlap's negative duration \b treats `_` as a word character, so \bbed\b never matched bed_01, music_bed_loop, or theme_song, and \bvo\b/\bvox\b/\btts\b had the same gap — an underscore-separated bed classified as "unknown" and could end up offered as its own carve source. Replaced the short hints with a boundary that actually excludes letters and digits on both sides. clipsOverlap computed end = start + duration without guarding sign, so a negative duration put end before start — an interval that does not describe anything, and one specific case showed it silently dropping a real overlap (a shorter, earlier broken end rejected a clip that genuinely contained the point). Duration clamps to zero instead: a clip cannot un-play time, and a zero-length clip at its start is the sane reading of "duration nobody wrote down as positive." Review by Miga (PR #3212). --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(studio): port the carve UI off the removed source/dynamic fields #3212 (accidentally squash-merged into this branch instead of main) changed HfCarveSettings from a single `source` + `dynamic` toggle to a `sources` list with dynamic mode removed outright — the multi-voice UI consumer that goes with that shape lands in the very next PR, so this branch was left with a type that no longer matched its own code. Minimal port, not the multi-voice redesign that PR does properly: the "Listen to" picker and analyse() treat sources[0] as the one voice this UI still understands, and every dynamic-mode branch (the automated envelope lanes, the toggle, the checkbox) is gone along with the field — a carve is now always the static value the analysis computes, matching what the type change made permanent. Test suite trimmed the same way: the automation-lane and toggle tests covered behavior that no longer exists. --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>

…n dispose (#3183) * fix(studio): drop the unused DomEditSelection import in PropertyPanelFlat CI caught it on PR #3026 (wa-12-panel-params); a later refactor in the stack removed the last use of the type here without removing the import. * fix(studio): close the typecheck and fallow gaps wa-18b-reschedule opened useAutomationLanes.ts's write() assumed gesture-scoped coalescing and a preview-only commit that useDomEditAttributeCommits.ts never grew — backported that option support from its own later commit so the two sides of the API agree. The paste path and its tests were missing the box selection's v0/v1 bounds a sibling commit added to AutomationSelection. The FX panel's carve controls still edited the six mechanism numbers (maxCutDb, bands, intelligibilityBias) after carveProfile() collapsed authoring to one Strength knob, so those fields no longer existed on HfCarveSettings; UI now edits strength, and analyseCarveBands is called with carveProfile(strength). Also closes fallow's complexity, dead-code and duplication findings on this PR's diff: extracted automationLaneDragMath.ts (pure group/point-move math) and useAutomationRangeDrag.ts (the marquee-select gesture) out of useAutomationLaneGestures.ts, pulled a couple of render-loop ternaries and a resolver into named functions, dropped an export nothing outside its file used, and shared a step-simplifier between audioCarve's two envelope builders. The edge-stretch vs. box-select priority test in TimelineAutomationLane.test was still pinning the pre-box-select rule (edge wins over a point sitting on it) that a sibling commit deliberately reversed — a point inside the box is now selected content, so grabbing it drags the group instead. Updated the test to the shipped rule instead of the old one. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): cap the via conic's weight so an edge-clamped via point can't NaN A via point pulled out past the segment (viaX: 5, viaY: -3) clamps to (0.999, 0.001) — exactly on the steady region's edge, where edge - viaX is 0. viaConic divided by that zero to get an infinite weight, and shapeVia turned Infinity into NaN a few steps later (Infinity - Infinity in the quadratic coefficient). NaN reaching setValueCurveAtTime silences the automated parameter for the rest of the render. Capped the weight at 1e6 instead of leaving it unbounded — past that point the arc already reads as touching the via point, so nothing visible is lost. Also hardened shapeVia's existing denominator guard (`<= 0`) to `!(> 0)`, since NaN fails the original comparison and fell through it. Review by Miga (PR #3208). * fix(studio-server): fingerprint the proactive waveform cache key too The route already keys the waveform cache on the asset's size and mtime as well as its path, so a rebuilt-in-place file gets fresh peaks instead of stale ones. generateWaveformCache — the proactive path that runs on upload — still called buildWaveformCacheKey with the path alone, so it wrote to a different key than the route reads from (making the pre-generated cache never found) and kept the exact collision bug this fingerprint exists to fix on its own path. Review by Miga (PR #3211). * style(docs): run oxfmt on the /hyperframes-audio skill docs Table column widths had drifted out of alignment with oxfmt's own rules, failing format:check and blocking the Preflight gate every downstream branch inherits. Whitespace only, no content change. * fix(core): stop \b from missing underscore-separated names, guard clipsOverlap's negative duration \b treats `_` as a word character, so \bbed\b never matched bed_01, music_bed_loop, or theme_song, and \bvo\b/\bvox\b/\btts\b had the same gap — an underscore-separated bed classified as "unknown" and could end up offered as its own carve source. Replaced the short hints with a boundary that actually excludes letters and digits on both sides. clipsOverlap computed end = start + duration without guarding sign, so a negative duration put end before start — an interval that does not describe anything, and one specific case showed it silently dropping a real overlap (a shorter, earlier broken end rejected a clip that genuinely contained the point). Duration clamps to zero instead: a clip cannot un-play time, and a zero-length clip at its start is the sane reading of "duration nobody wrote down as positive." Review by Miga (PR #3212). * fix(studio): widen PropertyPanel's resetModules render timeout again The 20s margin (already once widened for the same reason) is timing out in CI's full-monorepo Test run — the resetModules()+fresh-import render this test needs is uncached and competes with every other package's test suite for the same worker pool, and the same test passes in well under 2s standalone. Went to 45s rather than re-tuning to whatever number happens to clear the current CI load, since that number moves every time CI gains a package. * fix(studio): stop the single-candidate auto-apply carve firing twice Two auto-apply effects both fire when sourceOptions.length === 1: the multi-candidate effect only guards length === 0, so a single candidate passes it too, and the single-candidate effect passes its own guard right after — both compute the same sources list and both call setCarve, so the common case (one narrator, one bed) triggered two decodes, two FFT runs, and two concurrent attribute writes for one decision. The multi-candidate effect now defers to its sibling for exactly one candidate, which already has its own detailed handling for that case. Review by Miga (PR #3213). * feat(core): carve against every voice over a bed, always (#3212) * feat(core): carve against every voice over a bed, always dynamically A bed usually runs under a whole sequence — a narrator, an interview answer, a second presenter — and carving against one of them left the others fighting it. `source` becomes `sources`, and `mixCarveSources` sums every voice onto the BED's clock before anything is measured. That is what keeps one analysis sufficient: the chain is fixed, so there is no per-voice filter to switch between, and bands drawn from all the speech there is with envelopes that rise wherever any of it happens answer the actual question — where and when is speech masking this bed. Summed rather than averaged: two people talking at once mask more than either alone. Audio before the bed starts is dropped rather than folded in at zero, since it plays over nothing and shifting it would put a cut where there is no voice. `dynamic` is gone. A fixed depth thins the bed through every pause, and once both have been heard there is no reason to want it, so every carve follows the speech. Two helpers the panel and the headless script now share instead of each carrying a copy — two definitions of "what does this name suggest" drift, and then the two disagree about which track is the voice: - `classifyAudioName` reads a track's kind from its id and filename together. `unknown` is deliberately common: treating an unrecognised name as "not a voice" would hide the one track somebody needs to pick. - `clipsOverlap` keeps out a voice that never plays while the bed does. An unwritten duration counts as unbounded, not zero — refusing a clip whose length the composition leaves to the media would drop the commonest case there is. Files written before this still load: a single `source` reads as a one-voice list, a stored `dynamic` is ignored, and an absent attribute means the defaults whole. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): stop \b from missing underscore-separated names, guard clipsOverlap's negative duration \b treats `_` as a word character, so \bbed\b never matched bed_01, music_bed_loop, or theme_song, and \bvo\b/\bvox\b/\btts\b had the same gap — an underscore-separated bed classified as "unknown" and could end up offered as its own carve source. Replaced the short hints with a boundary that actually excludes letters and digits on both sides. clipsOverlap computed end = start + duration without guarding sign, so a negative duration put end before start — an interval that does not describe anything, and one specific case showed it silently dropping a real overlap (a shorter, earlier broken end rejected a clip that genuinely contained the point). Duration clamps to zero instead: a clip cannot un-play time, and a zero-length clip at its start is the sane reading of "duration nobody wrote down as positive." Review by Miga (PR #3212). --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(studio): port the carve UI off the removed source/dynamic fields #3212 (accidentally squash-merged into this branch instead of main) changed HfCarveSettings from a single `source` + `dynamic` toggle to a `sources` list with dynamic mode removed outright — the multi-voice UI consumer that goes with that shape lands in the very next PR, so this branch was left with a type that no longer matched its own code. Minimal port, not the multi-voice redesign that PR does properly: the "Listen to" picker and analyse() treat sources[0] as the one voice this UI still understands, and every dynamic-mode branch (the automated envelope lanes, the toggle, the checkbox) is gone along with the field — a carve is now always the static value the analysis computes, matching what the type change made permanent. Test suite trimmed the same way: the automation-lane and toggle tests covered behavior that no longer exists. --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>

…e rack (#3184) * fix(studio): drop the unused DomEditSelection import in PropertyPanelFlat CI caught it on PR #3026 (wa-12-panel-params); a later refactor in the stack removed the last use of the type here without removing the import. * fix(studio): close the typecheck and fallow gaps wa-18b-reschedule opened useAutomationLanes.ts's write() assumed gesture-scoped coalescing and a preview-only commit that useDomEditAttributeCommits.ts never grew — backported that option support from its own later commit so the two sides of the API agree. The paste path and its tests were missing the box selection's v0/v1 bounds a sibling commit added to AutomationSelection. The FX panel's carve controls still edited the six mechanism numbers (maxCutDb, bands, intelligibilityBias) after carveProfile() collapsed authoring to one Strength knob, so those fields no longer existed on HfCarveSettings; UI now edits strength, and analyseCarveBands is called with carveProfile(strength). Also closes fallow's complexity, dead-code and duplication findings on this PR's diff: extracted automationLaneDragMath.ts (pure group/point-move math) and useAutomationRangeDrag.ts (the marquee-select gesture) out of useAutomationLaneGestures.ts, pulled a couple of render-loop ternaries and a resolver into named functions, dropped an export nothing outside its file used, and shared a step-simplifier between audioCarve's two envelope builders. The edge-stretch vs. box-select priority test in TimelineAutomationLane.test was still pinning the pre-box-select rule (edge wins over a point sitting on it) that a sibling commit deliberately reversed — a point inside the box is now selected content, so grabbing it drags the group instead. Updated the test to the shipped rule instead of the old one. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): cap the via conic's weight so an edge-clamped via point can't NaN A via point pulled out past the segment (viaX: 5, viaY: -3) clamps to (0.999, 0.001) — exactly on the steady region's edge, where edge - viaX is 0. viaConic divided by that zero to get an infinite weight, and shapeVia turned Infinity into NaN a few steps later (Infinity - Infinity in the quadratic coefficient). NaN reaching setValueCurveAtTime silences the automated parameter for the rest of the render. Capped the weight at 1e6 instead of leaving it unbounded — past that point the arc already reads as touching the via point, so nothing visible is lost. Also hardened shapeVia's existing denominator guard (`<= 0`) to `!(> 0)`, since NaN fails the original comparison and fell through it. Review by Miga (PR #3208). * fix(studio-server): fingerprint the proactive waveform cache key too The route already keys the waveform cache on the asset's size and mtime as well as its path, so a rebuilt-in-place file gets fresh peaks instead of stale ones. generateWaveformCache — the proactive path that runs on upload — still called buildWaveformCacheKey with the path alone, so it wrote to a different key than the route reads from (making the pre-generated cache never found) and kept the exact collision bug this fingerprint exists to fix on its own path. Review by Miga (PR #3211). * style(docs): run oxfmt on the /hyperframes-audio skill docs Table column widths had drifted out of alignment with oxfmt's own rules, failing format:check and blocking the Preflight gate every downstream branch inherits. Whitespace only, no content change. * fix(core): stop \b from missing underscore-separated names, guard clipsOverlap's negative duration \b treats `_` as a word character, so \bbed\b never matched bed_01, music_bed_loop, or theme_song, and \bvo\b/\bvox\b/\btts\b had the same gap — an underscore-separated bed classified as "unknown" and could end up offered as its own carve source. Replaced the short hints with a boundary that actually excludes letters and digits on both sides. clipsOverlap computed end = start + duration without guarding sign, so a negative duration put end before start — an interval that does not describe anything, and one specific case showed it silently dropping a real overlap (a shorter, earlier broken end rejected a clip that genuinely contained the point). Duration clamps to zero instead: a clip cannot un-play time, and a zero-length clip at its start is the sane reading of "duration nobody wrote down as positive." Review by Miga (PR #3212). * fix(studio): widen PropertyPanel's resetModules render timeout again The 20s margin (already once widened for the same reason) is timing out in CI's full-monorepo Test run — the resetModules()+fresh-import render this test needs is uncached and competes with every other package's test suite for the same worker pool, and the same test passes in well under 2s standalone. Went to 45s rather than re-tuning to whatever number happens to clear the current CI load, since that number moves every time CI gains a package. * fix(studio): stop the single-candidate auto-apply carve firing twice Two auto-apply effects both fire when sourceOptions.length === 1: the multi-candidate effect only guards length === 0, so a single candidate passes it too, and the single-candidate effect passes its own guard right after — both compute the same sources list and both call setCarve, so the common case (one narrator, one bed) triggered two decodes, two FFT runs, and two concurrent attribute writes for one decision. The multi-candidate effect now defers to its sibling for exactly one candidate, which already has its own detailed handling for that case. Review by Miga (PR #3213). * feat(core): carve against every voice over a bed, always (#3212) * feat(core): carve against every voice over a bed, always dynamically A bed usually runs under a whole sequence — a narrator, an interview answer, a second presenter — and carving against one of them left the others fighting it. `source` becomes `sources`, and `mixCarveSources` sums every voice onto the BED's clock before anything is measured. That is what keeps one analysis sufficient: the chain is fixed, so there is no per-voice filter to switch between, and bands drawn from all the speech there is with envelopes that rise wherever any of it happens answer the actual question — where and when is speech masking this bed. Summed rather than averaged: two people talking at once mask more than either alone. Audio before the bed starts is dropped rather than folded in at zero, since it plays over nothing and shifting it would put a cut where there is no voice. `dynamic` is gone. A fixed depth thins the bed through every pause, and once both have been heard there is no reason to want it, so every carve follows the speech. Two helpers the panel and the headless script now share instead of each carrying a copy — two definitions of "what does this name suggest" drift, and then the two disagree about which track is the voice: - `classifyAudioName` reads a track's kind from its id and filename together. `unknown` is deliberately common: treating an unrecognised name as "not a voice" would hide the one track somebody needs to pick. - `clipsOverlap` keeps out a voice that never plays while the bed does. An unwritten duration counts as unbounded, not zero — refusing a clip whose length the composition leaves to the media would drop the commonest case there is. Files written before this still load: a single `source` reads as a one-voice list, a stored `dynamic` is ignored, and an absent attribute means the defaults whole. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): stop \b from missing underscore-separated names, guard clipsOverlap's negative duration \b treats `_` as a word character, so \bbed\b never matched bed_01, music_bed_loop, or theme_song, and \bvo\b/\bvox\b/\btts\b had the same gap — an underscore-separated bed classified as "unknown" and could end up offered as its own carve source. Replaced the short hints with a boundary that actually excludes letters and digits on both sides. clipsOverlap computed end = start + duration without guarding sign, so a negative duration put end before start — an interval that does not describe anything, and one specific case showed it silently dropping a real overlap (a shorter, earlier broken end rejected a clip that genuinely contained the point). Duration clamps to zero instead: a clip cannot un-play time, and a zero-length clip at its start is the sane reading of "duration nobody wrote down as positive." Review by Miga (PR #3212). --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(studio): port the carve UI off the removed source/dynamic fields #3212 (accidentally squash-merged into this branch instead of main) changed HfCarveSettings from a single `source` + `dynamic` toggle to a `sources` list with dynamic mode removed outright — the multi-voice UI consumer that goes with that shape lands in the very next PR, so this branch was left with a type that no longer matched its own code. Minimal port, not the multi-voice redesign that PR does properly: the "Listen to" picker and analyse() treat sources[0] as the one voice this UI still understands, and every dynamic-mode branch (the automated envelope lanes, the toggle, the checkbox) is gone along with the field — a carve is now always the static value the analysis computes, matching what the type change made permanent. Test suite trimmed the same way: the automation-lane and toggle tests covered behavior that no longer exists. --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>

* fix(studio): drop the unused DomEditSelection import in PropertyPanelFlat CI caught it on PR #3026 (wa-12-panel-params); a later refactor in the stack removed the last use of the type here without removing the import. * fix(studio): close the typecheck and fallow gaps wa-18b-reschedule opened useAutomationLanes.ts's write() assumed gesture-scoped coalescing and a preview-only commit that useDomEditAttributeCommits.ts never grew — backported that option support from its own later commit so the two sides of the API agree. The paste path and its tests were missing the box selection's v0/v1 bounds a sibling commit added to AutomationSelection. The FX panel's carve controls still edited the six mechanism numbers (maxCutDb, bands, intelligibilityBias) after carveProfile() collapsed authoring to one Strength knob, so those fields no longer existed on HfCarveSettings; UI now edits strength, and analyseCarveBands is called with carveProfile(strength). Also closes fallow's complexity, dead-code and duplication findings on this PR's diff: extracted automationLaneDragMath.ts (pure group/point-move math) and useAutomationRangeDrag.ts (the marquee-select gesture) out of useAutomationLaneGestures.ts, pulled a couple of render-loop ternaries and a resolver into named functions, dropped an export nothing outside its file used, and shared a step-simplifier between audioCarve's two envelope builders. The edge-stretch vs. box-select priority test in TimelineAutomationLane.test was still pinning the pre-box-select rule (edge wins over a point sitting on it) that a sibling commit deliberately reversed — a point inside the box is now selected content, so grabbing it drags the group instead. Updated the test to the shipped rule instead of the old one. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): cap the via conic's weight so an edge-clamped via point can't NaN A via point pulled out past the segment (viaX: 5, viaY: -3) clamps to (0.999, 0.001) — exactly on the steady region's edge, where edge - viaX is 0. viaConic divided by that zero to get an infinite weight, and shapeVia turned Infinity into NaN a few steps later (Infinity - Infinity in the quadratic coefficient). NaN reaching setValueCurveAtTime silences the automated parameter for the rest of the render. Capped the weight at 1e6 instead of leaving it unbounded — past that point the arc already reads as touching the via point, so nothing visible is lost. Also hardened shapeVia's existing denominator guard (`<= 0`) to `!(> 0)`, since NaN fails the original comparison and fell through it. Review by Miga (PR #3208). * fix(studio-server): fingerprint the proactive waveform cache key too The route already keys the waveform cache on the asset's size and mtime as well as its path, so a rebuilt-in-place file gets fresh peaks instead of stale ones. generateWaveformCache — the proactive path that runs on upload — still called buildWaveformCacheKey with the path alone, so it wrote to a different key than the route reads from (making the pre-generated cache never found) and kept the exact collision bug this fingerprint exists to fix on its own path. Review by Miga (PR #3211). * style(docs): run oxfmt on the /hyperframes-audio skill docs Table column widths had drifted out of alignment with oxfmt's own rules, failing format:check and blocking the Preflight gate every downstream branch inherits. Whitespace only, no content change. * fix(core): stop \b from missing underscore-separated names, guard clipsOverlap's negative duration \b treats `_` as a word character, so \bbed\b never matched bed_01, music_bed_loop, or theme_song, and \bvo\b/\bvox\b/\btts\b had the same gap — an underscore-separated bed classified as "unknown" and could end up offered as its own carve source. Replaced the short hints with a boundary that actually excludes letters and digits on both sides. clipsOverlap computed end = start + duration without guarding sign, so a negative duration put end before start — an interval that does not describe anything, and one specific case showed it silently dropping a real overlap (a shorter, earlier broken end rejected a clip that genuinely contained the point). Duration clamps to zero instead: a clip cannot un-play time, and a zero-length clip at its start is the sane reading of "duration nobody wrote down as positive." Review by Miga (PR #3212). * fix(studio): widen PropertyPanel's resetModules render timeout again The 20s margin (already once widened for the same reason) is timing out in CI's full-monorepo Test run — the resetModules()+fresh-import render this test needs is uncached and competes with every other package's test suite for the same worker pool, and the same test passes in well under 2s standalone. Went to 45s rather than re-tuning to whatever number happens to clear the current CI load, since that number moves every time CI gains a package. * fix(studio): stop the single-candidate auto-apply carve firing twice Two auto-apply effects both fire when sourceOptions.length === 1: the multi-candidate effect only guards length === 0, so a single candidate passes it too, and the single-candidate effect passes its own guard right after — both compute the same sources list and both call setCarve, so the common case (one narrator, one bed) triggered two decodes, two FFT runs, and two concurrent attribute writes for one decision. The multi-candidate effect now defers to its sibling for exactly one candidate, which already has its own detailed handling for that case. Review by Miga (PR #3213). * feat(core): carve against every voice over a bed, always (#3212) * feat(core): carve against every voice over a bed, always dynamically A bed usually runs under a whole sequence — a narrator, an interview answer, a second presenter — and carving against one of them left the others fighting it. `source` becomes `sources`, and `mixCarveSources` sums every voice onto the BED's clock before anything is measured. That is what keeps one analysis sufficient: the chain is fixed, so there is no per-voice filter to switch between, and bands drawn from all the speech there is with envelopes that rise wherever any of it happens answer the actual question — where and when is speech masking this bed. Summed rather than averaged: two people talking at once mask more than either alone. Audio before the bed starts is dropped rather than folded in at zero, since it plays over nothing and shifting it would put a cut where there is no voice. `dynamic` is gone. A fixed depth thins the bed through every pause, and once both have been heard there is no reason to want it, so every carve follows the speech. Two helpers the panel and the headless script now share instead of each carrying a copy — two definitions of "what does this name suggest" drift, and then the two disagree about which track is the voice: - `classifyAudioName` reads a track's kind from its id and filename together. `unknown` is deliberately common: treating an unrecognised name as "not a voice" would hide the one track somebody needs to pick. - `clipsOverlap` keeps out a voice that never plays while the bed does. An unwritten duration counts as unbounded, not zero — refusing a clip whose length the composition leaves to the media would drop the commonest case there is. Files written before this still load: a single `source` reads as a one-voice list, a stored `dynamic` is ignored, and an absent attribute means the defaults whole. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): stop \b from missing underscore-separated names, guard clipsOverlap's negative duration \b treats `_` as a word character, so \bbed\b never matched bed_01, music_bed_loop, or theme_song, and \bvo\b/\bvox\b/\btts\b had the same gap — an underscore-separated bed classified as "unknown" and could end up offered as its own carve source. Replaced the short hints with a boundary that actually excludes letters and digits on both sides. clipsOverlap computed end = start + duration without guarding sign, so a negative duration put end before start — an interval that does not describe anything, and one specific case showed it silently dropping a real overlap (a shorter, earlier broken end rejected a clip that genuinely contained the point). Duration clamps to zero instead: a clip cannot un-play time, and a zero-length clip at its start is the sane reading of "duration nobody wrote down as positive." Review by Miga (PR #3212). --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(studio): port the carve UI off the removed source/dynamic fields #3212 (accidentally squash-merged into this branch instead of main) changed HfCarveSettings from a single `source` + `dynamic` toggle to a `sources` list with dynamic mode removed outright — the multi-voice UI consumer that goes with that shape lands in the very next PR, so this branch was left with a type that no longer matched its own code. Minimal port, not the multi-voice redesign that PR does properly: the "Listen to" picker and analyse() treat sources[0] as the one voice this UI still understands, and every dynamic-mode branch (the automated envelope lanes, the toggle, the checkbox) is gone along with the field — a carve is now always the static value the analysis computes, matching what the type change made permanent. Test suite trimmed the same way: the automation-lane and toggle tests covered behavior that no longer exists. --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>

* fix(studio): close the typecheck and fallow gaps wa-18b-reschedule opened useAutomationLanes.ts's write() assumed gesture-scoped coalescing and a preview-only commit that useDomEditAttributeCommits.ts never grew — backported that option support from its own later commit so the two sides of the API agree. The paste path and its tests were missing the box selection's v0/v1 bounds a sibling commit added to AutomationSelection. The FX panel's carve controls still edited the six mechanism numbers (maxCutDb, bands, intelligibilityBias) after carveProfile() collapsed authoring to one Strength knob, so those fields no longer existed on HfCarveSettings; UI now edits strength, and analyseCarveBands is called with carveProfile(strength). Also closes fallow's complexity, dead-code and duplication findings on this PR's diff: extracted automationLaneDragMath.ts (pure group/point-move math) and useAutomationRangeDrag.ts (the marquee-select gesture) out of useAutomationLaneGestures.ts, pulled a couple of render-loop ternaries and a resolver into named functions, dropped an export nothing outside its file used, and shared a step-simplifier between audioCarve's two envelope builders. The edge-stretch vs. box-select priority test in TimelineAutomationLane.test was still pinning the pre-box-select rule (edge wins over a point sitting on it) that a sibling commit deliberately reversed — a point inside the box is now selected content, so grabbing it drags the group instead. Updated the test to the shipped rule instead of the old one. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): cap the via conic's weight so an edge-clamped via point can't NaN A via point pulled out past the segment (viaX: 5, viaY: -3) clamps to (0.999, 0.001) — exactly on the steady region's edge, where edge - viaX is 0. viaConic divided by that zero to get an infinite weight, and shapeVia turned Infinity into NaN a few steps later (Infinity - Infinity in the quadratic coefficient). NaN reaching setValueCurveAtTime silences the automated parameter for the rest of the render. Capped the weight at 1e6 instead of leaving it unbounded — past that point the arc already reads as touching the via point, so nothing visible is lost. Also hardened shapeVia's existing denominator guard (`<= 0`) to `!(> 0)`, since NaN fails the original comparison and fell through it. Review by Miga (PR #3208). * fix(studio-server): fingerprint the proactive waveform cache key too The route already keys the waveform cache on the asset's size and mtime as well as its path, so a rebuilt-in-place file gets fresh peaks instead of stale ones. generateWaveformCache — the proactive path that runs on upload — still called buildWaveformCacheKey with the path alone, so it wrote to a different key than the route reads from (making the pre-generated cache never found) and kept the exact collision bug this fingerprint exists to fix on its own path. Review by Miga (PR #3211). * style(docs): run oxfmt on the /hyperframes-audio skill docs Table column widths had drifted out of alignment with oxfmt's own rules, failing format:check and blocking the Preflight gate every downstream branch inherits. Whitespace only, no content change. * fix(core): stop \b from missing underscore-separated names, guard clipsOverlap's negative duration \b treats `_` as a word character, so \bbed\b never matched bed_01, music_bed_loop, or theme_song, and \bvo\b/\bvox\b/\btts\b had the same gap — an underscore-separated bed classified as "unknown" and could end up offered as its own carve source. Replaced the short hints with a boundary that actually excludes letters and digits on both sides. clipsOverlap computed end = start + duration without guarding sign, so a negative duration put end before start — an interval that does not describe anything, and one specific case showed it silently dropping a real overlap (a shorter, earlier broken end rejected a clip that genuinely contained the point). Duration clamps to zero instead: a clip cannot un-play time, and a zero-length clip at its start is the sane reading of "duration nobody wrote down as positive." Review by Miga (PR #3212). * fix(studio): widen PropertyPanel's resetModules render timeout again The 20s margin (already once widened for the same reason) is timing out in CI's full-monorepo Test run — the resetModules()+fresh-import render this test needs is uncached and competes with every other package's test suite for the same worker pool, and the same test passes in well under 2s standalone. Went to 45s rather than re-tuning to whatever number happens to clear the current CI load, since that number moves every time CI gains a package. * fix(studio): stop the single-candidate auto-apply carve firing twice Two auto-apply effects both fire when sourceOptions.length === 1: the multi-candidate effect only guards length === 0, so a single candidate passes it too, and the single-candidate effect passes its own guard right after — both compute the same sources list and both call setCarve, so the common case (one narrator, one bed) triggered two decodes, two FFT runs, and two concurrent attribute writes for one decision. The multi-candidate effect now defers to its sibling for exactly one candidate, which already has its own detailed handling for that case. Review by Miga (PR #3213). * feat(core): carve against every voice over a bed, always (#3212) * feat(core): carve against every voice over a bed, always dynamically A bed usually runs under a whole sequence — a narrator, an interview answer, a second presenter — and carving against one of them left the others fighting it. `source` becomes `sources`, and `mixCarveSources` sums every voice onto the BED's clock before anything is measured. That is what keeps one analysis sufficient: the chain is fixed, so there is no per-voice filter to switch between, and bands drawn from all the speech there is with envelopes that rise wherever any of it happens answer the actual question — where and when is speech masking this bed. Summed rather than averaged: two people talking at once mask more than either alone. Audio before the bed starts is dropped rather than folded in at zero, since it plays over nothing and shifting it would put a cut where there is no voice. `dynamic` is gone. A fixed depth thins the bed through every pause, and once both have been heard there is no reason to want it, so every carve follows the speech. Two helpers the panel and the headless script now share instead of each carrying a copy — two definitions of "what does this name suggest" drift, and then the two disagree about which track is the voice: - `classifyAudioName` reads a track's kind from its id and filename together. `unknown` is deliberately common: treating an unrecognised name as "not a voice" would hide the one track somebody needs to pick. - `clipsOverlap` keeps out a voice that never plays while the bed does. An unwritten duration counts as unbounded, not zero — refusing a clip whose length the composition leaves to the media would drop the commonest case there is. Files written before this still load: a single `source` reads as a one-voice list, a stored `dynamic` is ignored, and an absent attribute means the defaults whole. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): stop \b from missing underscore-separated names, guard clipsOverlap's negative duration \b treats `_` as a word character, so \bbed\b never matched bed_01, music_bed_loop, or theme_song, and \bvo\b/\bvox\b/\btts\b had the same gap — an underscore-separated bed classified as "unknown" and could end up offered as its own carve source. Replaced the short hints with a boundary that actually excludes letters and digits on both sides. clipsOverlap computed end = start + duration without guarding sign, so a negative duration put end before start — an interval that does not describe anything, and one specific case showed it silently dropping a real overlap (a shorter, earlier broken end rejected a clip that genuinely contained the point). Duration clamps to zero instead: a clip cannot un-play time, and a zero-length clip at its start is the sane reading of "duration nobody wrote down as positive." Review by Miga (PR #3212). --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(studio): port the carve UI off the removed source/dynamic fields #3212 (accidentally squash-merged into this branch instead of main) changed HfCarveSettings from a single `source` + `dynamic` toggle to a `sources` list with dynamic mode removed outright — the multi-voice UI consumer that goes with that shape lands in the very next PR, so this branch was left with a type that no longer matched its own code. Minimal port, not the multi-voice redesign that PR does properly: the "Listen to" picker and analyse() treat sources[0] as the one voice this UI still understands, and every dynamic-mode branch (the automated envelope lanes, the toggle, the checkbox) is gone along with the field — a carve is now always the static value the analysis computes, matching what the type change made permanent. Test suite trimmed the same way: the automation-lane and toggle tests covered behavior that no longer exists. --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>

…3187) * fix(studio): close the typecheck and fallow gaps wa-18b-reschedule opened useAutomationLanes.ts's write() assumed gesture-scoped coalescing and a preview-only commit that useDomEditAttributeCommits.ts never grew — backported that option support from its own later commit so the two sides of the API agree. The paste path and its tests were missing the box selection's v0/v1 bounds a sibling commit added to AutomationSelection. The FX panel's carve controls still edited the six mechanism numbers (maxCutDb, bands, intelligibilityBias) after carveProfile() collapsed authoring to one Strength knob, so those fields no longer existed on HfCarveSettings; UI now edits strength, and analyseCarveBands is called with carveProfile(strength). Also closes fallow's complexity, dead-code and duplication findings on this PR's diff: extracted automationLaneDragMath.ts (pure group/point-move math) and useAutomationRangeDrag.ts (the marquee-select gesture) out of useAutomationLaneGestures.ts, pulled a couple of render-loop ternaries and a resolver into named functions, dropped an export nothing outside its file used, and shared a step-simplifier between audioCarve's two envelope builders. The edge-stretch vs. box-select priority test in TimelineAutomationLane.test was still pinning the pre-box-select rule (edge wins over a point sitting on it) that a sibling commit deliberately reversed — a point inside the box is now selected content, so grabbing it drags the group instead. Updated the test to the shipped rule instead of the old one. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): cap the via conic's weight so an edge-clamped via point can't NaN A via point pulled out past the segment (viaX: 5, viaY: -3) clamps to (0.999, 0.001) — exactly on the steady region's edge, where edge - viaX is 0. viaConic divided by that zero to get an infinite weight, and shapeVia turned Infinity into NaN a few steps later (Infinity - Infinity in the quadratic coefficient). NaN reaching setValueCurveAtTime silences the automated parameter for the rest of the render. Capped the weight at 1e6 instead of leaving it unbounded — past that point the arc already reads as touching the via point, so nothing visible is lost. Also hardened shapeVia's existing denominator guard (`<= 0`) to `!(> 0)`, since NaN fails the original comparison and fell through it. Review by Miga (PR #3208). * fix(studio-server): fingerprint the proactive waveform cache key too The route already keys the waveform cache on the asset's size and mtime as well as its path, so a rebuilt-in-place file gets fresh peaks instead of stale ones. generateWaveformCache — the proactive path that runs on upload — still called buildWaveformCacheKey with the path alone, so it wrote to a different key than the route reads from (making the pre-generated cache never found) and kept the exact collision bug this fingerprint exists to fix on its own path. Review by Miga (PR #3211). * style(docs): run oxfmt on the /hyperframes-audio skill docs Table column widths had drifted out of alignment with oxfmt's own rules, failing format:check and blocking the Preflight gate every downstream branch inherits. Whitespace only, no content change. * fix(core): stop \b from missing underscore-separated names, guard clipsOverlap's negative duration \b treats `_` as a word character, so \bbed\b never matched bed_01, music_bed_loop, or theme_song, and \bvo\b/\bvox\b/\btts\b had the same gap — an underscore-separated bed classified as "unknown" and could end up offered as its own carve source. Replaced the short hints with a boundary that actually excludes letters and digits on both sides. clipsOverlap computed end = start + duration without guarding sign, so a negative duration put end before start — an interval that does not describe anything, and one specific case showed it silently dropping a real overlap (a shorter, earlier broken end rejected a clip that genuinely contained the point). Duration clamps to zero instead: a clip cannot un-play time, and a zero-length clip at its start is the sane reading of "duration nobody wrote down as positive." Review by Miga (PR #3212). * fix(studio): widen PropertyPanel's resetModules render timeout again The 20s margin (already once widened for the same reason) is timing out in CI's full-monorepo Test run — the resetModules()+fresh-import render this test needs is uncached and competes with every other package's test suite for the same worker pool, and the same test passes in well under 2s standalone. Went to 45s rather than re-tuning to whatever number happens to clear the current CI load, since that number moves every time CI gains a package. * fix(studio): stop the single-candidate auto-apply carve firing twice Two auto-apply effects both fire when sourceOptions.length === 1: the multi-candidate effect only guards length === 0, so a single candidate passes it too, and the single-candidate effect passes its own guard right after — both compute the same sources list and both call setCarve, so the common case (one narrator, one bed) triggered two decodes, two FFT runs, and two concurrent attribute writes for one decision. The multi-candidate effect now defers to its sibling for exactly one candidate, which already has its own detailed handling for that case. Review by Miga (PR #3213). * feat(core): carve against every voice over a bed, always (#3212) * feat(core): carve against every voice over a bed, always dynamically A bed usually runs under a whole sequence — a narrator, an interview answer, a second presenter — and carving against one of them left the others fighting it. `source` becomes `sources`, and `mixCarveSources` sums every voice onto the BED's clock before anything is measured. That is what keeps one analysis sufficient: the chain is fixed, so there is no per-voice filter to switch between, and bands drawn from all the speech there is with envelopes that rise wherever any of it happens answer the actual question — where and when is speech masking this bed. Summed rather than averaged: two people talking at once mask more than either alone. Audio before the bed starts is dropped rather than folded in at zero, since it plays over nothing and shifting it would put a cut where there is no voice. `dynamic` is gone. A fixed depth thins the bed through every pause, and once both have been heard there is no reason to want it, so every carve follows the speech. Two helpers the panel and the headless script now share instead of each carrying a copy — two definitions of "what does this name suggest" drift, and then the two disagree about which track is the voice: - `classifyAudioName` reads a track's kind from its id and filename together. `unknown` is deliberately common: treating an unrecognised name as "not a voice" would hide the one track somebody needs to pick. - `clipsOverlap` keeps out a voice that never plays while the bed does. An unwritten duration counts as unbounded, not zero — refusing a clip whose length the composition leaves to the media would drop the commonest case there is. Files written before this still load: a single `source` reads as a one-voice list, a stored `dynamic` is ignored, and an absent attribute means the defaults whole. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): stop \b from missing underscore-separated names, guard clipsOverlap's negative duration \b treats `_` as a word character, so \bbed\b never matched bed_01, music_bed_loop, or theme_song, and \bvo\b/\bvox\b/\btts\b had the same gap — an underscore-separated bed classified as "unknown" and could end up offered as its own carve source. Replaced the short hints with a boundary that actually excludes letters and digits on both sides. clipsOverlap computed end = start + duration without guarding sign, so a negative duration put end before start — an interval that does not describe anything, and one specific case showed it silently dropping a real overlap (a shorter, earlier broken end rejected a clip that genuinely contained the point). Duration clamps to zero instead: a clip cannot un-play time, and a zero-length clip at its start is the sane reading of "duration nobody wrote down as positive." Review by Miga (PR #3212). --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(studio): port the carve UI off the removed source/dynamic fields #3212 (accidentally squash-merged into this branch instead of main) changed HfCarveSettings from a single `source` + `dynamic` toggle to a `sources` list with dynamic mode removed outright — the multi-voice UI consumer that goes with that shape lands in the very next PR, so this branch was left with a type that no longer matched its own code. Minimal port, not the multi-voice redesign that PR does properly: the "Listen to" picker and analyse() treat sources[0] as the one voice this UI still understands, and every dynamic-mode branch (the automated envelope lanes, the toggle, the checkbox) is gone along with the field — a carve is now always the static value the analysis computes, matching what the type change made permanent. Test suite trimmed the same way: the automation-lane and toggle tests covered behavior that no longer exists. --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>

) * fix(studio): close the typecheck and fallow gaps wa-18b-reschedule opened useAutomationLanes.ts's write() assumed gesture-scoped coalescing and a preview-only commit that useDomEditAttributeCommits.ts never grew — backported that option support from its own later commit so the two sides of the API agree. The paste path and its tests were missing the box selection's v0/v1 bounds a sibling commit added to AutomationSelection. The FX panel's carve controls still edited the six mechanism numbers (maxCutDb, bands, intelligibilityBias) after carveProfile() collapsed authoring to one Strength knob, so those fields no longer existed on HfCarveSettings; UI now edits strength, and analyseCarveBands is called with carveProfile(strength). Also closes fallow's complexity, dead-code and duplication findings on this PR's diff: extracted automationLaneDragMath.ts (pure group/point-move math) and useAutomationRangeDrag.ts (the marquee-select gesture) out of useAutomationLaneGestures.ts, pulled a couple of render-loop ternaries and a resolver into named functions, dropped an export nothing outside its file used, and shared a step-simplifier between audioCarve's two envelope builders. The edge-stretch vs. box-select priority test in TimelineAutomationLane.test was still pinning the pre-box-select rule (edge wins over a point sitting on it) that a sibling commit deliberately reversed — a point inside the box is now selected content, so grabbing it drags the group instead. Updated the test to the shipped rule instead of the old one. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): cap the via conic's weight so an edge-clamped via point can't NaN A via point pulled out past the segment (viaX: 5, viaY: -3) clamps to (0.999, 0.001) — exactly on the steady region's edge, where edge - viaX is 0. viaConic divided by that zero to get an infinite weight, and shapeVia turned Infinity into NaN a few steps later (Infinity - Infinity in the quadratic coefficient). NaN reaching setValueCurveAtTime silences the automated parameter for the rest of the render. Capped the weight at 1e6 instead of leaving it unbounded — past that point the arc already reads as touching the via point, so nothing visible is lost. Also hardened shapeVia's existing denominator guard (`<= 0`) to `!(> 0)`, since NaN fails the original comparison and fell through it. Review by Miga (PR #3208). * fix(studio-server): fingerprint the proactive waveform cache key too The route already keys the waveform cache on the asset's size and mtime as well as its path, so a rebuilt-in-place file gets fresh peaks instead of stale ones. generateWaveformCache — the proactive path that runs on upload — still called buildWaveformCacheKey with the path alone, so it wrote to a different key than the route reads from (making the pre-generated cache never found) and kept the exact collision bug this fingerprint exists to fix on its own path. Review by Miga (PR #3211). * style(docs): run oxfmt on the /hyperframes-audio skill docs Table column widths had drifted out of alignment with oxfmt's own rules, failing format:check and blocking the Preflight gate every downstream branch inherits. Whitespace only, no content change. * fix(core): stop \b from missing underscore-separated names, guard clipsOverlap's negative duration \b treats `_` as a word character, so \bbed\b never matched bed_01, music_bed_loop, or theme_song, and \bvo\b/\bvox\b/\btts\b had the same gap — an underscore-separated bed classified as "unknown" and could end up offered as its own carve source. Replaced the short hints with a boundary that actually excludes letters and digits on both sides. clipsOverlap computed end = start + duration without guarding sign, so a negative duration put end before start — an interval that does not describe anything, and one specific case showed it silently dropping a real overlap (a shorter, earlier broken end rejected a clip that genuinely contained the point). Duration clamps to zero instead: a clip cannot un-play time, and a zero-length clip at its start is the sane reading of "duration nobody wrote down as positive." Review by Miga (PR #3212). * fix(studio): widen PropertyPanel's resetModules render timeout again The 20s margin (already once widened for the same reason) is timing out in CI's full-monorepo Test run — the resetModules()+fresh-import render this test needs is uncached and competes with every other package's test suite for the same worker pool, and the same test passes in well under 2s standalone. Went to 45s rather than re-tuning to whatever number happens to clear the current CI load, since that number moves every time CI gains a package. * fix(studio): stop the single-candidate auto-apply carve firing twice Two auto-apply effects both fire when sourceOptions.length === 1: the multi-candidate effect only guards length === 0, so a single candidate passes it too, and the single-candidate effect passes its own guard right after — both compute the same sources list and both call setCarve, so the common case (one narrator, one bed) triggered two decodes, two FFT runs, and two concurrent attribute writes for one decision. The multi-candidate effect now defers to its sibling for exactly one candidate, which already has its own detailed handling for that case. Review by Miga (PR #3213). * feat(core): carve against every voice over a bed, always (#3212) * feat(core): carve against every voice over a bed, always dynamically A bed usually runs under a whole sequence — a narrator, an interview answer, a second presenter — and carving against one of them left the others fighting it. `source` becomes `sources`, and `mixCarveSources` sums every voice onto the BED's clock before anything is measured. That is what keeps one analysis sufficient: the chain is fixed, so there is no per-voice filter to switch between, and bands drawn from all the speech there is with envelopes that rise wherever any of it happens answer the actual question — where and when is speech masking this bed. Summed rather than averaged: two people talking at once mask more than either alone. Audio before the bed starts is dropped rather than folded in at zero, since it plays over nothing and shifting it would put a cut where there is no voice. `dynamic` is gone. A fixed depth thins the bed through every pause, and once both have been heard there is no reason to want it, so every carve follows the speech. Two helpers the panel and the headless script now share instead of each carrying a copy — two definitions of "what does this name suggest" drift, and then the two disagree about which track is the voice: - `classifyAudioName` reads a track's kind from its id and filename together. `unknown` is deliberately common: treating an unrecognised name as "not a voice" would hide the one track somebody needs to pick. - `clipsOverlap` keeps out a voice that never plays while the bed does. An unwritten duration counts as unbounded, not zero — refusing a clip whose length the composition leaves to the media would drop the commonest case there is. Files written before this still load: a single `source` reads as a one-voice list, a stored `dynamic` is ignored, and an absent attribute means the defaults whole. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): stop \b from missing underscore-separated names, guard clipsOverlap's negative duration \b treats `_` as a word character, so \bbed\b never matched bed_01, music_bed_loop, or theme_song, and \bvo\b/\bvox\b/\btts\b had the same gap — an underscore-separated bed classified as "unknown" and could end up offered as its own carve source. Replaced the short hints with a boundary that actually excludes letters and digits on both sides. clipsOverlap computed end = start + duration without guarding sign, so a negative duration put end before start — an interval that does not describe anything, and one specific case showed it silently dropping a real overlap (a shorter, earlier broken end rejected a clip that genuinely contained the point). Duration clamps to zero instead: a clip cannot un-play time, and a zero-length clip at its start is the sane reading of "duration nobody wrote down as positive." Review by Miga (PR #3212). --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(studio): port the carve UI off the removed source/dynamic fields #3212 (accidentally squash-merged into this branch instead of main) changed HfCarveSettings from a single `source` + `dynamic` toggle to a `sources` list with dynamic mode removed outright — the multi-voice UI consumer that goes with that shape lands in the very next PR, so this branch was left with a type that no longer matched its own code. Minimal port, not the multi-voice redesign that PR does properly: the "Listen to" picker and analyse() treat sources[0] as the one voice this UI still understands, and every dynamic-mode branch (the automated envelope lanes, the toggle, the checkbox) is gone along with the field — a carve is now always the static value the analysis computes, matching what the type change made permanent. Test suite trimmed the same way: the automation-lane and toggle tests covered behavior that no longer exists. --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>

* fix(studio): close the typecheck and fallow gaps wa-18b-reschedule opened useAutomationLanes.ts's write() assumed gesture-scoped coalescing and a preview-only commit that useDomEditAttributeCommits.ts never grew — backported that option support from its own later commit so the two sides of the API agree. The paste path and its tests were missing the box selection's v0/v1 bounds a sibling commit added to AutomationSelection. The FX panel's carve controls still edited the six mechanism numbers (maxCutDb, bands, intelligibilityBias) after carveProfile() collapsed authoring to one Strength knob, so those fields no longer existed on HfCarveSettings; UI now edits strength, and analyseCarveBands is called with carveProfile(strength). Also closes fallow's complexity, dead-code and duplication findings on this PR's diff: extracted automationLaneDragMath.ts (pure group/point-move math) and useAutomationRangeDrag.ts (the marquee-select gesture) out of useAutomationLaneGestures.ts, pulled a couple of render-loop ternaries and a resolver into named functions, dropped an export nothing outside its file used, and shared a step-simplifier between audioCarve's two envelope builders. The edge-stretch vs. box-select priority test in TimelineAutomationLane.test was still pinning the pre-box-select rule (edge wins over a point sitting on it) that a sibling commit deliberately reversed — a point inside the box is now selected content, so grabbing it drags the group instead. Updated the test to the shipped rule instead of the old one. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): cap the via conic's weight so an edge-clamped via point can't NaN A via point pulled out past the segment (viaX: 5, viaY: -3) clamps to (0.999, 0.001) — exactly on the steady region's edge, where edge - viaX is 0. viaConic divided by that zero to get an infinite weight, and shapeVia turned Infinity into NaN a few steps later (Infinity - Infinity in the quadratic coefficient). NaN reaching setValueCurveAtTime silences the automated parameter for the rest of the render. Capped the weight at 1e6 instead of leaving it unbounded — past that point the arc already reads as touching the via point, so nothing visible is lost. Also hardened shapeVia's existing denominator guard (`<= 0`) to `!(> 0)`, since NaN fails the original comparison and fell through it. Review by Miga (PR #3208). * fix(studio-server): fingerprint the proactive waveform cache key too The route already keys the waveform cache on the asset's size and mtime as well as its path, so a rebuilt-in-place file gets fresh peaks instead of stale ones. generateWaveformCache — the proactive path that runs on upload — still called buildWaveformCacheKey with the path alone, so it wrote to a different key than the route reads from (making the pre-generated cache never found) and kept the exact collision bug this fingerprint exists to fix on its own path. Review by Miga (PR #3211). * style(docs): run oxfmt on the /hyperframes-audio skill docs Table column widths had drifted out of alignment with oxfmt's own rules, failing format:check and blocking the Preflight gate every downstream branch inherits. Whitespace only, no content change. * fix(core): stop \b from missing underscore-separated names, guard clipsOverlap's negative duration \b treats `_` as a word character, so \bbed\b never matched bed_01, music_bed_loop, or theme_song, and \bvo\b/\bvox\b/\btts\b had the same gap — an underscore-separated bed classified as "unknown" and could end up offered as its own carve source. Replaced the short hints with a boundary that actually excludes letters and digits on both sides. clipsOverlap computed end = start + duration without guarding sign, so a negative duration put end before start — an interval that does not describe anything, and one specific case showed it silently dropping a real overlap (a shorter, earlier broken end rejected a clip that genuinely contained the point). Duration clamps to zero instead: a clip cannot un-play time, and a zero-length clip at its start is the sane reading of "duration nobody wrote down as positive." Review by Miga (PR #3212). * fix(studio): widen PropertyPanel's resetModules render timeout again The 20s margin (already once widened for the same reason) is timing out in CI's full-monorepo Test run — the resetModules()+fresh-import render this test needs is uncached and competes with every other package's test suite for the same worker pool, and the same test passes in well under 2s standalone. Went to 45s rather than re-tuning to whatever number happens to clear the current CI load, since that number moves every time CI gains a package. * fix(studio): stop the single-candidate auto-apply carve firing twice Two auto-apply effects both fire when sourceOptions.length === 1: the multi-candidate effect only guards length === 0, so a single candidate passes it too, and the single-candidate effect passes its own guard right after — both compute the same sources list and both call setCarve, so the common case (one narrator, one bed) triggered two decodes, two FFT runs, and two concurrent attribute writes for one decision. The multi-candidate effect now defers to its sibling for exactly one candidate, which already has its own detailed handling for that case. Review by Miga (PR #3213). * feat(core): carve against every voice over a bed, always (#3212) * feat(core): carve against every voice over a bed, always dynamically A bed usually runs under a whole sequence — a narrator, an interview answer, a second presenter — and carving against one of them left the others fighting it. `source` becomes `sources`, and `mixCarveSources` sums every voice onto the BED's clock before anything is measured. That is what keeps one analysis sufficient: the chain is fixed, so there is no per-voice filter to switch between, and bands drawn from all the speech there is with envelopes that rise wherever any of it happens answer the actual question — where and when is speech masking this bed. Summed rather than averaged: two people talking at once mask more than either alone. Audio before the bed starts is dropped rather than folded in at zero, since it plays over nothing and shifting it would put a cut where there is no voice. `dynamic` is gone. A fixed depth thins the bed through every pause, and once both have been heard there is no reason to want it, so every carve follows the speech. Two helpers the panel and the headless script now share instead of each carrying a copy — two definitions of "what does this name suggest" drift, and then the two disagree about which track is the voice: - `classifyAudioName` reads a track's kind from its id and filename together. `unknown` is deliberately common: treating an unrecognised name as "not a voice" would hide the one track somebody needs to pick. - `clipsOverlap` keeps out a voice that never plays while the bed does. An unwritten duration counts as unbounded, not zero — refusing a clip whose length the composition leaves to the media would drop the commonest case there is. Files written before this still load: a single `source` reads as a one-voice list, a stored `dynamic` is ignored, and an absent attribute means the defaults whole. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): stop \b from missing underscore-separated names, guard clipsOverlap's negative duration \b treats `_` as a word character, so \bbed\b never matched bed_01, music_bed_loop, or theme_song, and \bvo\b/\bvox\b/\btts\b had the same gap — an underscore-separated bed classified as "unknown" and could end up offered as its own carve source. Replaced the short hints with a boundary that actually excludes letters and digits on both sides. clipsOverlap computed end = start + duration without guarding sign, so a negative duration put end before start — an interval that does not describe anything, and one specific case showed it silently dropping a real overlap (a shorter, earlier broken end rejected a clip that genuinely contained the point). Duration clamps to zero instead: a clip cannot un-play time, and a zero-length clip at its start is the sane reading of "duration nobody wrote down as positive." Review by Miga (PR #3212). --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(studio): port the carve UI off the removed source/dynamic fields #3212 (accidentally squash-merged into this branch instead of main) changed HfCarveSettings from a single `source` + `dynamic` toggle to a `sources` list with dynamic mode removed outright — the multi-voice UI consumer that goes with that shape lands in the very next PR, so this branch was left with a type that no longer matched its own code. Minimal port, not the multi-voice redesign that PR does properly: the "Listen to" picker and analyse() treat sources[0] as the one voice this UI still understands, and every dynamic-mode branch (the automated envelope lanes, the toggle, the checkbox) is gone along with the field — a carve is now always the static value the analysis computes, matching what the type change made permanent. Test suite trimmed the same way: the automation-lane and toggle tests covered behavior that no longer exists. --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>

…or out of a menu (#3190) * fix(studio): close the typecheck and fallow gaps wa-18b-reschedule opened useAutomationLanes.ts's write() assumed gesture-scoped coalescing and a preview-only commit that useDomEditAttributeCommits.ts never grew — backported that option support from its own later commit so the two sides of the API agree. The paste path and its tests were missing the box selection's v0/v1 bounds a sibling commit added to AutomationSelection. The FX panel's carve controls still edited the six mechanism numbers (maxCutDb, bands, intelligibilityBias) after carveProfile() collapsed authoring to one Strength knob, so those fields no longer existed on HfCarveSettings; UI now edits strength, and analyseCarveBands is called with carveProfile(strength). Also closes fallow's complexity, dead-code and duplication findings on this PR's diff: extracted automationLaneDragMath.ts (pure group/point-move math) and useAutomationRangeDrag.ts (the marquee-select gesture) out of useAutomationLaneGestures.ts, pulled a couple of render-loop ternaries and a resolver into named functions, dropped an export nothing outside its file used, and shared a step-simplifier between audioCarve's two envelope builders. The edge-stretch vs. box-select priority test in TimelineAutomationLane.test was still pinning the pre-box-select rule (edge wins over a point sitting on it) that a sibling commit deliberately reversed — a point inside the box is now selected content, so grabbing it drags the group instead. Updated the test to the shipped rule instead of the old one. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): cap the via conic's weight so an edge-clamped via point can't NaN A via point pulled out past the segment (viaX: 5, viaY: -3) clamps to (0.999, 0.001) — exactly on the steady region's edge, where edge - viaX is 0. viaConic divided by that zero to get an infinite weight, and shapeVia turned Infinity into NaN a few steps later (Infinity - Infinity in the quadratic coefficient). NaN reaching setValueCurveAtTime silences the automated parameter for the rest of the render. Capped the weight at 1e6 instead of leaving it unbounded — past that point the arc already reads as touching the via point, so nothing visible is lost. Also hardened shapeVia's existing denominator guard (`<= 0`) to `!(> 0)`, since NaN fails the original comparison and fell through it. Review by Miga (PR #3208). * fix(studio-server): fingerprint the proactive waveform cache key too The route already keys the waveform cache on the asset's size and mtime as well as its path, so a rebuilt-in-place file gets fresh peaks instead of stale ones. generateWaveformCache — the proactive path that runs on upload — still called buildWaveformCacheKey with the path alone, so it wrote to a different key than the route reads from (making the pre-generated cache never found) and kept the exact collision bug this fingerprint exists to fix on its own path. Review by Miga (PR #3211). * style(docs): run oxfmt on the /hyperframes-audio skill docs Table column widths had drifted out of alignment with oxfmt's own rules, failing format:check and blocking the Preflight gate every downstream branch inherits. Whitespace only, no content change. * fix(core): stop \b from missing underscore-separated names, guard clipsOverlap's negative duration \b treats `_` as a word character, so \bbed\b never matched bed_01, music_bed_loop, or theme_song, and \bvo\b/\bvox\b/\btts\b had the same gap — an underscore-separated bed classified as "unknown" and could end up offered as its own carve source. Replaced the short hints with a boundary that actually excludes letters and digits on both sides. clipsOverlap computed end = start + duration without guarding sign, so a negative duration put end before start — an interval that does not describe anything, and one specific case showed it silently dropping a real overlap (a shorter, earlier broken end rejected a clip that genuinely contained the point). Duration clamps to zero instead: a clip cannot un-play time, and a zero-length clip at its start is the sane reading of "duration nobody wrote down as positive." Review by Miga (PR #3212). * fix(studio): widen PropertyPanel's resetModules render timeout again The 20s margin (already once widened for the same reason) is timing out in CI's full-monorepo Test run — the resetModules()+fresh-import render this test needs is uncached and competes with every other package's test suite for the same worker pool, and the same test passes in well under 2s standalone. Went to 45s rather than re-tuning to whatever number happens to clear the current CI load, since that number moves every time CI gains a package. * fix(studio): stop the single-candidate auto-apply carve firing twice Two auto-apply effects both fire when sourceOptions.length === 1: the multi-candidate effect only guards length === 0, so a single candidate passes it too, and the single-candidate effect passes its own guard right after — both compute the same sources list and both call setCarve, so the common case (one narrator, one bed) triggered two decodes, two FFT runs, and two concurrent attribute writes for one decision. The multi-candidate effect now defers to its sibling for exactly one candidate, which already has its own detailed handling for that case. Review by Miga (PR #3213). * feat(core): carve against every voice over a bed, always (#3212) * feat(core): carve against every voice over a bed, always dynamically A bed usually runs under a whole sequence — a narrator, an interview answer, a second presenter — and carving against one of them left the others fighting it. `source` becomes `sources`, and `mixCarveSources` sums every voice onto the BED's clock before anything is measured. That is what keeps one analysis sufficient: the chain is fixed, so there is no per-voice filter to switch between, and bands drawn from all the speech there is with envelopes that rise wherever any of it happens answer the actual question — where and when is speech masking this bed. Summed rather than averaged: two people talking at once mask more than either alone. Audio before the bed starts is dropped rather than folded in at zero, since it plays over nothing and shifting it would put a cut where there is no voice. `dynamic` is gone. A fixed depth thins the bed through every pause, and once both have been heard there is no reason to want it, so every carve follows the speech. Two helpers the panel and the headless script now share instead of each carrying a copy — two definitions of "what does this name suggest" drift, and then the two disagree about which track is the voice: - `classifyAudioName` reads a track's kind from its id and filename together. `unknown` is deliberately common: treating an unrecognised name as "not a voice" would hide the one track somebody needs to pick. - `clipsOverlap` keeps out a voice that never plays while the bed does. An unwritten duration counts as unbounded, not zero — refusing a clip whose length the composition leaves to the media would drop the commonest case there is. Files written before this still load: a single `source` reads as a one-voice list, a stored `dynamic` is ignored, and an absent attribute means the defaults whole. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): stop \b from missing underscore-separated names, guard clipsOverlap's negative duration \b treats `_` as a word character, so \bbed\b never matched bed_01, music_bed_loop, or theme_song, and \bvo\b/\bvox\b/\btts\b had the same gap — an underscore-separated bed classified as "unknown" and could end up offered as its own carve source. Replaced the short hints with a boundary that actually excludes letters and digits on both sides. clipsOverlap computed end = start + duration without guarding sign, so a negative duration put end before start — an interval that does not describe anything, and one specific case showed it silently dropping a real overlap (a shorter, earlier broken end rejected a clip that genuinely contained the point). Duration clamps to zero instead: a clip cannot un-play time, and a zero-length clip at its start is the sane reading of "duration nobody wrote down as positive." Review by Miga (PR #3212). --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(studio): port the carve UI off the removed source/dynamic fields #3212 (accidentally squash-merged into this branch instead of main) changed HfCarveSettings from a single `source` + `dynamic` toggle to a `sources` list with dynamic mode removed outright — the multi-voice UI consumer that goes with that shape lands in the very next PR, so this branch was left with a type that no longer matched its own code. Minimal port, not the multi-voice redesign that PR does properly: the "Listen to" picker and analyse() treat sources[0] as the one voice this UI still understands, and every dynamic-mode branch (the automated envelope lanes, the toggle, the checkbox) is gone along with the field — a carve is now always the static value the analysis computes, matching what the type change made permanent. Test suite trimmed the same way: the automation-lane and toggle tests covered behavior that no longer exists. --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>

…ign (#3191) * fix(studio): close the typecheck and fallow gaps wa-18b-reschedule opened useAutomationLanes.ts's write() assumed gesture-scoped coalescing and a preview-only commit that useDomEditAttributeCommits.ts never grew — backported that option support from its own later commit so the two sides of the API agree. The paste path and its tests were missing the box selection's v0/v1 bounds a sibling commit added to AutomationSelection. The FX panel's carve controls still edited the six mechanism numbers (maxCutDb, bands, intelligibilityBias) after carveProfile() collapsed authoring to one Strength knob, so those fields no longer existed on HfCarveSettings; UI now edits strength, and analyseCarveBands is called with carveProfile(strength). Also closes fallow's complexity, dead-code and duplication findings on this PR's diff: extracted automationLaneDragMath.ts (pure group/point-move math) and useAutomationRangeDrag.ts (the marquee-select gesture) out of useAutomationLaneGestures.ts, pulled a couple of render-loop ternaries and a resolver into named functions, dropped an export nothing outside its file used, and shared a step-simplifier between audioCarve's two envelope builders. The edge-stretch vs. box-select priority test in TimelineAutomationLane.test was still pinning the pre-box-select rule (edge wins over a point sitting on it) that a sibling commit deliberately reversed — a point inside the box is now selected content, so grabbing it drags the group instead. Updated the test to the shipped rule instead of the old one. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): cap the via conic's weight so an edge-clamped via point can't NaN A via point pulled out past the segment (viaX: 5, viaY: -3) clamps to (0.999, 0.001) — exactly on the steady region's edge, where edge - viaX is 0. viaConic divided by that zero to get an infinite weight, and shapeVia turned Infinity into NaN a few steps later (Infinity - Infinity in the quadratic coefficient). NaN reaching setValueCurveAtTime silences the automated parameter for the rest of the render. Capped the weight at 1e6 instead of leaving it unbounded — past that point the arc already reads as touching the via point, so nothing visible is lost. Also hardened shapeVia's existing denominator guard (`<= 0`) to `!(> 0)`, since NaN fails the original comparison and fell through it. Review by Miga (PR #3208). * fix(studio-server): fingerprint the proactive waveform cache key too The route already keys the waveform cache on the asset's size and mtime as well as its path, so a rebuilt-in-place file gets fresh peaks instead of stale ones. generateWaveformCache — the proactive path that runs on upload — still called buildWaveformCacheKey with the path alone, so it wrote to a different key than the route reads from (making the pre-generated cache never found) and kept the exact collision bug this fingerprint exists to fix on its own path. Review by Miga (PR #3211). * style(docs): run oxfmt on the /hyperframes-audio skill docs Table column widths had drifted out of alignment with oxfmt's own rules, failing format:check and blocking the Preflight gate every downstream branch inherits. Whitespace only, no content change. * fix(core): stop \b from missing underscore-separated names, guard clipsOverlap's negative duration \b treats `_` as a word character, so \bbed\b never matched bed_01, music_bed_loop, or theme_song, and \bvo\b/\bvox\b/\btts\b had the same gap — an underscore-separated bed classified as "unknown" and could end up offered as its own carve source. Replaced the short hints with a boundary that actually excludes letters and digits on both sides. clipsOverlap computed end = start + duration without guarding sign, so a negative duration put end before start — an interval that does not describe anything, and one specific case showed it silently dropping a real overlap (a shorter, earlier broken end rejected a clip that genuinely contained the point). Duration clamps to zero instead: a clip cannot un-play time, and a zero-length clip at its start is the sane reading of "duration nobody wrote down as positive." Review by Miga (PR #3212). * fix(studio): widen PropertyPanel's resetModules render timeout again The 20s margin (already once widened for the same reason) is timing out in CI's full-monorepo Test run — the resetModules()+fresh-import render this test needs is uncached and competes with every other package's test suite for the same worker pool, and the same test passes in well under 2s standalone. Went to 45s rather than re-tuning to whatever number happens to clear the current CI load, since that number moves every time CI gains a package. * fix(studio): stop the single-candidate auto-apply carve firing twice Two auto-apply effects both fire when sourceOptions.length === 1: the multi-candidate effect only guards length === 0, so a single candidate passes it too, and the single-candidate effect passes its own guard right after — both compute the same sources list and both call setCarve, so the common case (one narrator, one bed) triggered two decodes, two FFT runs, and two concurrent attribute writes for one decision. The multi-candidate effect now defers to its sibling for exactly one candidate, which already has its own detailed handling for that case. Review by Miga (PR #3213). * feat(core): carve against every voice over a bed, always (#3212) * feat(core): carve against every voice over a bed, always dynamically A bed usually runs under a whole sequence — a narrator, an interview answer, a second presenter — and carving against one of them left the others fighting it. `source` becomes `sources`, and `mixCarveSources` sums every voice onto the BED's clock before anything is measured. That is what keeps one analysis sufficient: the chain is fixed, so there is no per-voice filter to switch between, and bands drawn from all the speech there is with envelopes that rise wherever any of it happens answer the actual question — where and when is speech masking this bed. Summed rather than averaged: two people talking at once mask more than either alone. Audio before the bed starts is dropped rather than folded in at zero, since it plays over nothing and shifting it would put a cut where there is no voice. `dynamic` is gone. A fixed depth thins the bed through every pause, and once both have been heard there is no reason to want it, so every carve follows the speech. Two helpers the panel and the headless script now share instead of each carrying a copy — two definitions of "what does this name suggest" drift, and then the two disagree about which track is the voice: - `classifyAudioName` reads a track's kind from its id and filename together. `unknown` is deliberately common: treating an unrecognised name as "not a voice" would hide the one track somebody needs to pick. - `clipsOverlap` keeps out a voice that never plays while the bed does. An unwritten duration counts as unbounded, not zero — refusing a clip whose length the composition leaves to the media would drop the commonest case there is. Files written before this still load: a single `source` reads as a one-voice list, a stored `dynamic` is ignored, and an absent attribute means the defaults whole. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): stop \b from missing underscore-separated names, guard clipsOverlap's negative duration \b treats `_` as a word character, so \bbed\b never matched bed_01, music_bed_loop, or theme_song, and \bvo\b/\bvox\b/\btts\b had the same gap — an underscore-separated bed classified as "unknown" and could end up offered as its own carve source. Replaced the short hints with a boundary that actually excludes letters and digits on both sides. clipsOverlap computed end = start + duration without guarding sign, so a negative duration put end before start — an interval that does not describe anything, and one specific case showed it silently dropping a real overlap (a shorter, earlier broken end rejected a clip that genuinely contained the point). Duration clamps to zero instead: a clip cannot un-play time, and a zero-length clip at its start is the sane reading of "duration nobody wrote down as positive." Review by Miga (PR #3212). --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(studio): port the carve UI off the removed source/dynamic fields #3212 (accidentally squash-merged into this branch instead of main) changed HfCarveSettings from a single `source` + `dynamic` toggle to a `sources` list with dynamic mode removed outright — the multi-voice UI consumer that goes with that shape lands in the very next PR, so this branch was left with a type that no longer matched its own code. Minimal port, not the multi-voice redesign that PR does properly: the "Listen to" picker and analyse() treat sources[0] as the one voice this UI still understands, and every dynamic-mode branch (the automated envelope lanes, the toggle, the checkbox) is gone along with the field — a carve is now always the static value the analysis computes, matching what the type change made permanent. Test suite trimmed the same way: the automation-lane and toggle tests covered behavior that no longer exists. * chore: fix markdown formatting --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>

…id (#3229) * fix(studio): close the typecheck and fallow gaps wa-18b-reschedule opened useAutomationLanes.ts's write() assumed gesture-scoped coalescing and a preview-only commit that useDomEditAttributeCommits.ts never grew — backported that option support from its own later commit so the two sides of the API agree. The paste path and its tests were missing the box selection's v0/v1 bounds a sibling commit added to AutomationSelection. The FX panel's carve controls still edited the six mechanism numbers (maxCutDb, bands, intelligibilityBias) after carveProfile() collapsed authoring to one Strength knob, so those fields no longer existed on HfCarveSettings; UI now edits strength, and analyseCarveBands is called with carveProfile(strength). Also closes fallow's complexity, dead-code and duplication findings on this PR's diff: extracted automationLaneDragMath.ts (pure group/point-move math) and useAutomationRangeDrag.ts (the marquee-select gesture) out of useAutomationLaneGestures.ts, pulled a couple of render-loop ternaries and a resolver into named functions, dropped an export nothing outside its file used, and shared a step-simplifier between audioCarve's two envelope builders. The edge-stretch vs. box-select priority test in TimelineAutomationLane.test was still pinning the pre-box-select rule (edge wins over a point sitting on it) that a sibling commit deliberately reversed — a point inside the box is now selected content, so grabbing it drags the group instead. Updated the test to the shipped rule instead of the old one. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): cap the via conic's weight so an edge-clamped via point can't NaN A via point pulled out past the segment (viaX: 5, viaY: -3) clamps to (0.999, 0.001) — exactly on the steady region's edge, where edge - viaX is 0. viaConic divided by that zero to get an infinite weight, and shapeVia turned Infinity into NaN a few steps later (Infinity - Infinity in the quadratic coefficient). NaN reaching setValueCurveAtTime silences the automated parameter for the rest of the render. Capped the weight at 1e6 instead of leaving it unbounded — past that point the arc already reads as touching the via point, so nothing visible is lost. Also hardened shapeVia's existing denominator guard (`<= 0`) to `!(> 0)`, since NaN fails the original comparison and fell through it. Review by Miga (PR #3208). * fix(studio-server): fingerprint the proactive waveform cache key too The route already keys the waveform cache on the asset's size and mtime as well as its path, so a rebuilt-in-place file gets fresh peaks instead of stale ones. generateWaveformCache — the proactive path that runs on upload — still called buildWaveformCacheKey with the path alone, so it wrote to a different key than the route reads from (making the pre-generated cache never found) and kept the exact collision bug this fingerprint exists to fix on its own path. Review by Miga (PR #3211). * style(docs): run oxfmt on the /hyperframes-audio skill docs Table column widths had drifted out of alignment with oxfmt's own rules, failing format:check and blocking the Preflight gate every downstream branch inherits. Whitespace only, no content change. * fix(core): stop \b from missing underscore-separated names, guard clipsOverlap's negative duration \b treats `_` as a word character, so \bbed\b never matched bed_01, music_bed_loop, or theme_song, and \bvo\b/\bvox\b/\btts\b had the same gap — an underscore-separated bed classified as "unknown" and could end up offered as its own carve source. Replaced the short hints with a boundary that actually excludes letters and digits on both sides. clipsOverlap computed end = start + duration without guarding sign, so a negative duration put end before start — an interval that does not describe anything, and one specific case showed it silently dropping a real overlap (a shorter, earlier broken end rejected a clip that genuinely contained the point). Duration clamps to zero instead: a clip cannot un-play time, and a zero-length clip at its start is the sane reading of "duration nobody wrote down as positive." Review by Miga (PR #3212). * fix(studio): widen PropertyPanel's resetModules render timeout again The 20s margin (already once widened for the same reason) is timing out in CI's full-monorepo Test run — the resetModules()+fresh-import render this test needs is uncached and competes with every other package's test suite for the same worker pool, and the same test passes in well under 2s standalone. Went to 45s rather than re-tuning to whatever number happens to clear the current CI load, since that number moves every time CI gains a package. * fix(studio): stop the single-candidate auto-apply carve firing twice Two auto-apply effects both fire when sourceOptions.length === 1: the multi-candidate effect only guards length === 0, so a single candidate passes it too, and the single-candidate effect passes its own guard right after — both compute the same sources list and both call setCarve, so the common case (one narrator, one bed) triggered two decodes, two FFT runs, and two concurrent attribute writes for one decision. The multi-candidate effect now defers to its sibling for exactly one candidate, which already has its own detailed handling for that case. Review by Miga (PR #3213). * feat(core): carve against every voice over a bed, always (#3212) * feat(core): carve against every voice over a bed, always dynamically A bed usually runs under a whole sequence — a narrator, an interview answer, a second presenter — and carving against one of them left the others fighting it. `source` becomes `sources`, and `mixCarveSources` sums every voice onto the BED's clock before anything is measured. That is what keeps one analysis sufficient: the chain is fixed, so there is no per-voice filter to switch between, and bands drawn from all the speech there is with envelopes that rise wherever any of it happens answer the actual question — where and when is speech masking this bed. Summed rather than averaged: two people talking at once mask more than either alone. Audio before the bed starts is dropped rather than folded in at zero, since it plays over nothing and shifting it would put a cut where there is no voice. `dynamic` is gone. A fixed depth thins the bed through every pause, and once both have been heard there is no reason to want it, so every carve follows the speech. Two helpers the panel and the headless script now share instead of each carrying a copy — two definitions of "what does this name suggest" drift, and then the two disagree about which track is the voice: - `classifyAudioName` reads a track's kind from its id and filename together. `unknown` is deliberately common: treating an unrecognised name as "not a voice" would hide the one track somebody needs to pick. - `clipsOverlap` keeps out a voice that never plays while the bed does. An unwritten duration counts as unbounded, not zero — refusing a clip whose length the composition leaves to the media would drop the commonest case there is. Files written before this still load: a single `source` reads as a one-voice list, a stored `dynamic` is ignored, and an absent attribute means the defaults whole. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): stop \b from missing underscore-separated names, guard clipsOverlap's negative duration \b treats `_` as a word character, so \bbed\b never matched bed_01, music_bed_loop, or theme_song, and \bvo\b/\bvox\b/\btts\b had the same gap — an underscore-separated bed classified as "unknown" and could end up offered as its own carve source. Replaced the short hints with a boundary that actually excludes letters and digits on both sides. clipsOverlap computed end = start + duration without guarding sign, so a negative duration put end before start — an interval that does not describe anything, and one specific case showed it silently dropping a real overlap (a shorter, earlier broken end rejected a clip that genuinely contained the point). Duration clamps to zero instead: a clip cannot un-play time, and a zero-length clip at its start is the sane reading of "duration nobody wrote down as positive." Review by Miga (PR #3212). --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(studio): port the carve UI off the removed source/dynamic fields #3212 (accidentally squash-merged into this branch instead of main) changed HfCarveSettings from a single `source` + `dynamic` toggle to a `sources` list with dynamic mode removed outright — the multi-voice UI consumer that goes with that shape lands in the very next PR, so this branch was left with a type that no longer matched its own code. Minimal port, not the multi-voice redesign that PR does properly: the "Listen to" picker and analyse() treat sources[0] as the one voice this UI still understands, and every dynamic-mode branch (the automated envelope lanes, the toggle, the checkbox) is gone along with the field — a carve is now always the static value the analysis computes, matching what the type change made permanent. Test suite trimmed the same way: the automation-lane and toggle tests covered behavior that no longer exists. * refactor(studio): break up the FX rack's largest functions and files Fallow flagged 9 complexity findings and 2 file-size violations after the telemetry stack landed. Extracts FxPresetRun, FxAddMenu, FxRackChain, FxNodeOpenBody, FxNodeParams, and useFxAudition/useFxCarve/useFxLevelling/ useFxChainObserved out of propertyPanelFxSection.tsx and propertyPanelAudioFxGroup.tsx, splits propertyPanelFxNodeRow.tsx's open-face rendering into its own component, and dedupes a clone in studioTelemetry.ts. Pure structural move — no behavior change; full test suite still green. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>

miga-heygen reviewed Aug 11, 2026

View reviewed changes

miga-heygen mentioned this pull request Aug 11, 2026

feat(studio): the carve is one module in the rack #3213

Merged

vanceingalls force-pushed the wa-18f-multi-voice-carve branch from 96f1e70 to 38548aa Compare August 12, 2026 02:56

vanceingalls force-pushed the wa-18e-audio-skill branch from 87f3eae to 58bef70 Compare August 12, 2026 02:56

vanceingalls force-pushed the wa-18f-multi-voice-carve branch from 38548aa to 5596a64 Compare August 12, 2026 04:48

vanceingalls force-pushed the wa-18e-audio-skill branch from 58bef70 to 9bab207 Compare August 12, 2026 04:48

vanceingalls force-pushed the wa-18f-multi-voice-carve branch from 5596a64 to ba35e98 Compare August 12, 2026 07:26

vanceingalls force-pushed the wa-18e-audio-skill branch from 9bab207 to 5c52232 Compare August 12, 2026 07:26

vanceingalls force-pushed the wa-18f-multi-voice-carve branch from ba35e98 to be98e6a Compare August 12, 2026 07:49

vanceingalls force-pushed the wa-18e-audio-skill branch from 5c52232 to d3621a0 Compare August 12, 2026 07:49

vanceingalls added 15 commits August 12, 2026 11:32

merge: pull in the fallow-audit fixes

08231f2

merge: pull in the main-catchup merge

b503335

merge: pull in the deletion-guard fix

3bb1e8b

merge: pull in the main-merge conflict fix

b3979ad

merge: pull in the wet/dry dedupe fix

e9a74fb

merge: pull in the main-merge conflict fix

e6fed38

merge: pull in the main-merge conflict fix

866e753

merge: pull in the stray-file cleanup

815739e

merge: pull in the main-merge conflict fix

f224f68

merge: pull in the CRAP-score fix

2c5e7ee

merge: pull in the PR #3025 conflict fix

10a280b

merge: pull in the unused-import fix

3e48807

merge: pull in the PR #3055 conflict fix

3eae9eb

merge: pull in the PR #3207 conflict fix

13f40e5

merge: pull in the PR #3208 conflict fix

bcc3747

vanceingalls added 2 commits August 13, 2026 00:49

chore: merge in the PropertyPanel timeout fix

cfd5551

chore: merge in the main restack from #3210

49c619b

vanceingalls merged commit 93921f0 into wa-18e-audio-skill Aug 13, 2026
23 checks passed

vanceingalls deleted the wa-18f-multi-voice-carve branch August 13, 2026 08:37

Navigation Menu

Uh oh!

feat(core): carve against every voice over a bed, always - #3212

feat(core): carve against every voice over a bed, always#3212
vanceingalls merged 23 commits into
wa-18e-audio-skillfrom
wa-18f-multi-voice-carve

vanceingalls commented Aug 11, 2026

Uh oh!

miga-heygen left a comment

Uh oh!

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

2 participants

Uh oh!

Conversation

vanceingalls commented Aug 11, 2026

Uh oh!

miga-heygen left a comment

Choose a reason for hiding this comment

Uh oh!

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

2 participants