forked from torvalds/linux
-
Notifications
You must be signed in to change notification settings - Fork 407
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Preliminary support for s5k4ecgx 5Mp camera sensor #45
Closed
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This patch includes changes to: mach-hkdk4412.c - added CSI/FIMC/Sensor setup + Kconfig changes pmic-77686.h - added definitions for regulator supplies needed by csiphy and sensor media: s5k4ecgx.c - removed one regulator because ODROID-X2 schematics have only three controllable voltages routed to the sensor port new files in firmware/ - these are from Linaro fimc-v4l-app repository, since repository was deleted (author no longer working for Linaro) - I've added them here.
This includes: i2c-dev is now 'y' S5K4ECGX is now 'y' MIPIPHY is now 'y'
SPI0/1 disabled for testing purposes.
Closing.. :( |
I'll try to get back to this on 3.1[456]-y somewhere in the future. |
dsd
pushed a commit
to dsd/linux
that referenced
this pull request
Jun 19, 2014
Add the mailbox device DT node for OMAP5 SoC. The OMAP5 mailbox IP is identical to that used in OMAP4. The OMAP5 hwmod data no longer publishes the module address space, so this patch fixes the WARN_ON backtrace associated with the following trace during the kernel boot: "omap_hwmod: mailbox: doesn't have mpu register target base". Otherwise we get a warning like this: WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2538 _init+0x1c0/0x3dc() omap_hwmod: mailbox: doesn't have mpu register target base Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.15.0-rc2-00001-gb5e85a0 hardkernel#45 [<c0015724>] (unwind_backtrace) from [<c00120f4>] (show_stack+0x10/0x14) [<c00120f4>] (show_stack) from [<c05a1ccc>] (dump_stack+0x78/0x94) [<c05a1ccc>] (dump_stack) from [<c0042a74>] (warn_slowpath_common+0x6c/0x8c) [<c0042a74>] (warn_slowpath_common) from [<c0042b28>] (warn_slowpath_fmt+0x30/0x40) [<c0042b28>] (warn_slowpath_fmt) from [<c0803b40>] (_init+0x1c0/0x3dc) [<c0803b40>] (_init) from [<c0029c8c>] (omap_hwmod_for_each+0x34/0x5c) [<c0029c8c>] (omap_hwmod_for_each) from [<c08042b0>] (__omap_hwmod_setup_all+0x24/0x40) [<c08042b0>] (__omap_hwmod_setup_all) from [<c00088b8>] (do_one_initcall+0x34/0x160) [<c00088b8>] (do_one_initcall) from [<c07f7bf4>] (kernel_init_freeable+0xfc/0x1c8) [<c07f7bf4>] (kernel_init_freeable) from [<c059c4f4>] (kernel_init+0x8/0xe4) [<c059c4f4>] (kernel_init) from [<c000eaa8>] (ret_from_fork+0x14/0x2c) Signed-off-by: Suman Anna <[email protected]> [[email protected]: updated description to for the warning] Signed-off-by: Tony Lindgren <[email protected]>
Dmole
pushed a commit
to Dmole/linux
that referenced
this pull request
Mar 12, 2017
commit 1c68bb0 upstream. Running with KASAN and crypto tests currently gives BUG: KASAN: global-out-of-bounds in __test_aead+0x9d9/0x2200 at addr ffffffff8212fca0 Read of size 16 by task cryptomgr_test/1107 Address belongs to variable 0xffffffff8212fca0 CPU: 0 PID: 1107 Comm: cryptomgr_test Not tainted 4.10.0+ hardkernel#45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.1-1.fc24 04/01/2014 Call Trace: dump_stack+0x63/0x8a kasan_report.part.1+0x4a7/0x4e0 ? __test_aead+0x9d9/0x2200 ? crypto_ccm_init_crypt+0x218/0x3c0 [ccm] kasan_report+0x20/0x30 check_memory_region+0x13c/0x1a0 memcpy+0x23/0x50 __test_aead+0x9d9/0x2200 ? kasan_unpoison_shadow+0x35/0x50 ? alg_test_akcipher+0xf0/0xf0 ? crypto_skcipher_init_tfm+0x2e3/0x310 ? crypto_spawn_tfm2+0x37/0x60 ? crypto_ccm_init_tfm+0xa9/0xd0 [ccm] ? crypto_aead_init_tfm+0x7b/0x90 ? crypto_alloc_tfm+0xc4/0x190 test_aead+0x28/0xc0 alg_test_aead+0x54/0xd0 alg_test+0x1eb/0x3d0 ? alg_find_test+0x90/0x90 ? __sched_text_start+0x8/0x8 ? __wake_up_common+0x70/0xb0 cryptomgr_test+0x4d/0x60 kthread+0x173/0x1c0 ? crypto_acomp_scomp_free_ctx+0x60/0x60 ? kthread_create_on_node+0xa0/0xa0 ret_from_fork+0x2c/0x40 Memory state around the buggy address: ffffffff8212fb80: 00 00 00 00 01 fa fa fa fa fa fa fa 00 00 00 00 ffffffff8212fc00: 00 01 fa fa fa fa fa fa 00 00 00 00 01 fa fa fa >ffffffff8212fc80: fa fa fa fa 00 05 fa fa fa fa fa fa 00 00 00 00 ^ ffffffff8212fd00: 01 fa fa fa fa fa fa fa 00 00 00 00 01 fa fa fa ffffffff8212fd80: fa fa fa fa 00 00 00 00 00 05 fa fa fa fa fa fa This always happens on the same IV which is less than 16 bytes. Per Ard, "CCM IVs are 16 bytes, but due to the way they are constructed internally, the final couple of bytes of input IV are dont-cares. Apparently, we do read all 16 bytes, which triggers the KASAN errors." Fix this by padding the IV with null bytes to be at least 16 bytes. Fixes: 0bc5a6c ("crypto: testmgr - Disable rfc4309 test and convert test vectors") Acked-by: Ard Biesheuvel <[email protected]> Signed-off-by: Laura Abbott <[email protected]> Signed-off-by: Herbert Xu <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Dmole
pushed a commit
to Dmole/linux
that referenced
this pull request
Mar 12, 2017
commit 1c68bb0 upstream. Running with KASAN and crypto tests currently gives BUG: KASAN: global-out-of-bounds in __test_aead+0x9d9/0x2200 at addr ffffffff8212fca0 Read of size 16 by task cryptomgr_test/1107 Address belongs to variable 0xffffffff8212fca0 CPU: 0 PID: 1107 Comm: cryptomgr_test Not tainted 4.10.0+ hardkernel#45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.1-1.fc24 04/01/2014 Call Trace: dump_stack+0x63/0x8a kasan_report.part.1+0x4a7/0x4e0 ? __test_aead+0x9d9/0x2200 ? crypto_ccm_init_crypt+0x218/0x3c0 [ccm] kasan_report+0x20/0x30 check_memory_region+0x13c/0x1a0 memcpy+0x23/0x50 __test_aead+0x9d9/0x2200 ? kasan_unpoison_shadow+0x35/0x50 ? alg_test_akcipher+0xf0/0xf0 ? crypto_skcipher_init_tfm+0x2e3/0x310 ? crypto_spawn_tfm2+0x37/0x60 ? crypto_ccm_init_tfm+0xa9/0xd0 [ccm] ? crypto_aead_init_tfm+0x7b/0x90 ? crypto_alloc_tfm+0xc4/0x190 test_aead+0x28/0xc0 alg_test_aead+0x54/0xd0 alg_test+0x1eb/0x3d0 ? alg_find_test+0x90/0x90 ? __sched_text_start+0x8/0x8 ? __wake_up_common+0x70/0xb0 cryptomgr_test+0x4d/0x60 kthread+0x173/0x1c0 ? crypto_acomp_scomp_free_ctx+0x60/0x60 ? kthread_create_on_node+0xa0/0xa0 ret_from_fork+0x2c/0x40 Memory state around the buggy address: ffffffff8212fb80: 00 00 00 00 01 fa fa fa fa fa fa fa 00 00 00 00 ffffffff8212fc00: 00 01 fa fa fa fa fa fa 00 00 00 00 01 fa fa fa >ffffffff8212fc80: fa fa fa fa 00 05 fa fa fa fa fa fa 00 00 00 00 ^ ffffffff8212fd00: 01 fa fa fa fa fa fa fa 00 00 00 00 01 fa fa fa ffffffff8212fd80: fa fa fa fa 00 00 00 00 00 05 fa fa fa fa fa fa This always happens on the same IV which is less than 16 bytes. Per Ard, "CCM IVs are 16 bytes, but due to the way they are constructed internally, the final couple of bytes of input IV are dont-cares. Apparently, we do read all 16 bytes, which triggers the KASAN errors." Fix this by padding the IV with null bytes to be at least 16 bytes. Fixes: 0bc5a6c ("crypto: testmgr - Disable rfc4309 test and convert test vectors") Acked-by: Ard Biesheuvel <[email protected]> Signed-off-by: Laura Abbott <[email protected]> Signed-off-by: Herbert Xu <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Dmole
pushed a commit
to Dmole/linux
that referenced
this pull request
Jul 22, 2017
commit f630c38 upstream. When destroying a VRF device we cleanup the slaves in its ndo_uninit() function, but that causes packets to be switched (skb->dev == vrf being destroyed) even though we're pass the point where the VRF should be receiving any packets while it is being dismantled. This causes a BUG_ON to trigger if we have raw sockets (trace below). The reason is that the inetdev of the VRF has been destroyed but we're still sending packets up the stack with it, so let's free the slaves in the dellink callback as David Ahern suggested. Note that this fix doesn't prevent packets from going up when the VRF device is admin down. [ 35.631371] ------------[ cut here ]------------ [ 35.631603] kernel BUG at net/ipv4/fib_frontend.c:285! [ 35.631854] invalid opcode: 0000 [hardkernel#1] SMP [ 35.631977] Modules linked in: [ 35.632081] CPU: 2 PID: 22 Comm: ksoftirqd/2 Not tainted 4.12.0-rc7+ hardkernel#45 [ 35.632247] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 35.632477] task: ffff88005ad68000 task.stack: ffff88005ad64000 [ 35.632632] RIP: 0010:fib_compute_spec_dst+0xfc/0x1ee [ 35.632769] RSP: 0018:ffff88005ad67978 EFLAGS: 00010202 [ 35.632910] RAX: 0000000000000001 RBX: ffff880059a7f200 RCX: 0000000000000000 [ 35.633084] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffff82274af0 [ 35.633256] RBP: ffff88005ad679f8 R08: 000000000001ef70 R09: 0000000000000046 [ 35.633430] R10: ffff88005ad679f8 R11: ffff880037731cb0 R12: 0000000000000001 [ 35.633603] R13: ffff8800599e3000 R14: 0000000000000000 R15: ffff8800599cb852 [ 35.634114] FS: 0000000000000000(0000) GS:ffff88005d900000(0000) knlGS:0000000000000000 [ 35.634306] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 35.634456] CR2: 00007f3563227095 CR3: 000000000201d000 CR4: 00000000000406e0 [ 35.634632] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 35.634865] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 35.635055] Call Trace: [ 35.635271] ? __lock_acquire+0xf0d/0x1117 [ 35.635522] ipv4_pktinfo_prepare+0x82/0x151 [ 35.635831] raw_rcv_skb+0x17/0x3c [ 35.636062] raw_rcv+0xe5/0xf7 [ 35.636287] raw_local_deliver+0x169/0x1d9 [ 35.636534] ip_local_deliver_finish+0x87/0x1c4 [ 35.636820] ip_local_deliver+0x63/0x7f [ 35.637058] ip_rcv_finish+0x340/0x3a1 [ 35.637295] ip_rcv+0x314/0x34a [ 35.637525] __netif_receive_skb_core+0x49f/0x7c5 [ 35.637780] ? lock_acquire+0x13f/0x1d7 [ 35.638018] ? lock_acquire+0x15e/0x1d7 [ 35.638259] __netif_receive_skb+0x1e/0x94 [ 35.638502] ? __netif_receive_skb+0x1e/0x94 [ 35.638748] netif_receive_skb_internal+0x74/0x300 [ 35.639002] ? dev_gro_receive+0x2ed/0x411 [ 35.639246] ? lock_is_held_type+0xc4/0xd2 [ 35.639491] napi_gro_receive+0x105/0x1a0 [ 35.639736] receive_buf+0xc32/0xc74 [ 35.639965] ? detach_buf+0x67/0x153 [ 35.640201] ? virtqueue_get_buf_ctx+0x120/0x176 [ 35.640453] virtnet_poll+0x128/0x1c5 [ 35.640690] net_rx_action+0x103/0x343 [ 35.640932] __do_softirq+0x1c7/0x4b7 [ 35.641171] run_ksoftirqd+0x23/0x5c [ 35.641403] smpboot_thread_fn+0x24f/0x26d [ 35.641646] ? sort_range+0x22/0x22 [ 35.641878] kthread+0x129/0x131 [ 35.642104] ? __list_add+0x31/0x31 [ 35.642335] ? __list_add+0x31/0x31 [ 35.642568] ret_from_fork+0x2a/0x40 [ 35.642804] Code: 05 bd 87 a3 00 01 e8 1f ef 98 ff 4d 85 f6 48 c7 c7 f0 4a 27 82 41 0f 94 c4 31 c9 31 d2 41 0f b6 f4 e8 04 71 a1 ff 45 84 e4 74 02 <0f> 0b 0f b7 93 c4 00 00 00 4d 8b a5 80 05 00 00 48 03 93 d0 00 [ 35.644342] RIP: fib_compute_spec_dst+0xfc/0x1ee RSP: ffff88005ad67978 Fixes: 193125d ("net: Introduce VRF device driver") Reported-by: Chris Cormier <[email protected]> Signed-off-by: Nikolay Aleksandrov <[email protected]> Acked-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Dmole
pushed a commit
to Dmole/linux
that referenced
this pull request
Jul 22, 2017
commit f630c38 upstream. When destroying a VRF device we cleanup the slaves in its ndo_uninit() function, but that causes packets to be switched (skb->dev == vrf being destroyed) even though we're pass the point where the VRF should be receiving any packets while it is being dismantled. This causes a BUG_ON to trigger if we have raw sockets (trace below). The reason is that the inetdev of the VRF has been destroyed but we're still sending packets up the stack with it, so let's free the slaves in the dellink callback as David Ahern suggested. Note that this fix doesn't prevent packets from going up when the VRF device is admin down. [ 35.631371] ------------[ cut here ]------------ [ 35.631603] kernel BUG at net/ipv4/fib_frontend.c:285! [ 35.631854] invalid opcode: 0000 [hardkernel#1] SMP [ 35.631977] Modules linked in: [ 35.632081] CPU: 2 PID: 22 Comm: ksoftirqd/2 Not tainted 4.12.0-rc7+ hardkernel#45 [ 35.632247] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 35.632477] task: ffff88005ad68000 task.stack: ffff88005ad64000 [ 35.632632] RIP: 0010:fib_compute_spec_dst+0xfc/0x1ee [ 35.632769] RSP: 0018:ffff88005ad67978 EFLAGS: 00010202 [ 35.632910] RAX: 0000000000000001 RBX: ffff880059a7f200 RCX: 0000000000000000 [ 35.633084] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffff82274af0 [ 35.633256] RBP: ffff88005ad679f8 R08: 000000000001ef70 R09: 0000000000000046 [ 35.633430] R10: ffff88005ad679f8 R11: ffff880037731cb0 R12: 0000000000000001 [ 35.633603] R13: ffff8800599e3000 R14: 0000000000000000 R15: ffff8800599cb852 [ 35.634114] FS: 0000000000000000(0000) GS:ffff88005d900000(0000) knlGS:0000000000000000 [ 35.634306] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 35.634456] CR2: 00007f3563227095 CR3: 000000000201d000 CR4: 00000000000406e0 [ 35.634632] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 35.634865] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 35.635055] Call Trace: [ 35.635271] ? __lock_acquire+0xf0d/0x1117 [ 35.635522] ipv4_pktinfo_prepare+0x82/0x151 [ 35.635831] raw_rcv_skb+0x17/0x3c [ 35.636062] raw_rcv+0xe5/0xf7 [ 35.636287] raw_local_deliver+0x169/0x1d9 [ 35.636534] ip_local_deliver_finish+0x87/0x1c4 [ 35.636820] ip_local_deliver+0x63/0x7f [ 35.637058] ip_rcv_finish+0x340/0x3a1 [ 35.637295] ip_rcv+0x314/0x34a [ 35.637525] __netif_receive_skb_core+0x49f/0x7c5 [ 35.637780] ? lock_acquire+0x13f/0x1d7 [ 35.638018] ? lock_acquire+0x15e/0x1d7 [ 35.638259] __netif_receive_skb+0x1e/0x94 [ 35.638502] ? __netif_receive_skb+0x1e/0x94 [ 35.638748] netif_receive_skb_internal+0x74/0x300 [ 35.639002] ? dev_gro_receive+0x2ed/0x411 [ 35.639246] ? lock_is_held_type+0xc4/0xd2 [ 35.639491] napi_gro_receive+0x105/0x1a0 [ 35.639736] receive_buf+0xc32/0xc74 [ 35.639965] ? detach_buf+0x67/0x153 [ 35.640201] ? virtqueue_get_buf_ctx+0x120/0x176 [ 35.640453] virtnet_poll+0x128/0x1c5 [ 35.640690] net_rx_action+0x103/0x343 [ 35.640932] __do_softirq+0x1c7/0x4b7 [ 35.641171] run_ksoftirqd+0x23/0x5c [ 35.641403] smpboot_thread_fn+0x24f/0x26d [ 35.641646] ? sort_range+0x22/0x22 [ 35.641878] kthread+0x129/0x131 [ 35.642104] ? __list_add+0x31/0x31 [ 35.642335] ? __list_add+0x31/0x31 [ 35.642568] ret_from_fork+0x2a/0x40 [ 35.642804] Code: 05 bd 87 a3 00 01 e8 1f ef 98 ff 4d 85 f6 48 c7 c7 f0 4a 27 82 41 0f 94 c4 31 c9 31 d2 41 0f b6 f4 e8 04 71 a1 ff 45 84 e4 74 02 <0f> 0b 0f b7 93 c4 00 00 00 4d 8b a5 80 05 00 00 48 03 93 d0 00 [ 35.644342] RIP: fib_compute_spec_dst+0xfc/0x1ee RSP: ffff88005ad67978 Fixes: 193125d ("net: Introduce VRF device driver") Reported-by: Chris Cormier <[email protected]> Signed-off-by: Nikolay Aleksandrov <[email protected]> Acked-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]> [backport to 4.4 - gregkh] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Dmole
pushed a commit
to Dmole/linux
that referenced
this pull request
Apr 19, 2018
commit e8980d6 upstream. Prior to access UCMA commands, the context should be initialized and connected to CM_ID with ucma_create_id(). In case user skips this step, he can provide non-valid ctx without CM_ID and cause to multiple NULL dereferences. Also there are situations where the create_id can be raced with other user access, ensure that the context is only shared to other threads once it is fully initialized to avoid the races. [ 109.088108] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 [ 109.090315] IP: ucma_connect+0x138/0x1d0 [ 109.092595] PGD 80000001dc02d067 P4D 80000001dc02d067 PUD 1da9ef067 PMD 0 [ 109.095384] Oops: 0000 [hardkernel#1] SMP KASAN PTI [ 109.097834] CPU: 0 PID: 663 Comm: uclose Tainted: G B 4.16.0-rc1-00062-g2975d5de6428 hardkernel#45 [ 109.100816] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 [ 109.105943] RIP: 0010:ucma_connect+0x138/0x1d0 [ 109.108850] RSP: 0018:ffff8801c8567a80 EFLAGS: 00010246 [ 109.111484] RAX: 0000000000000000 RBX: 1ffff100390acf50 RCX: ffffffff9d7812e2 [ 109.114496] RDX: 1ffffffff3f507a5 RSI: 0000000000000297 RDI: 0000000000000297 [ 109.117490] RBP: ffff8801daa15600 R08: 0000000000000000 R09: ffffed00390aceeb [ 109.120429] R10: 0000000000000001 R11: ffffed00390aceea R12: 0000000000000000 [ 109.123318] R13: 0000000000000120 R14: ffff8801de6459c0 R15: 0000000000000118 [ 109.126221] FS: 00007fabb68d6700(0000) GS:ffff8801e5c00000(0000) knlGS:0000000000000000 [ 109.129468] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 109.132523] CR2: 0000000000000020 CR3: 00000001d45d8003 CR4: 00000000003606b0 [ 109.135573] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 109.138716] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 109.142057] Call Trace: [ 109.144160] ? ucma_listen+0x110/0x110 [ 109.146386] ? wake_up_q+0x59/0x90 [ 109.148853] ? futex_wake+0x10b/0x2a0 [ 109.151297] ? save_stack+0x89/0xb0 [ 109.153489] ? _copy_from_user+0x5e/0x90 [ 109.155500] ucma_write+0x174/0x1f0 [ 109.157933] ? ucma_resolve_route+0xf0/0xf0 [ 109.160389] ? __mod_node_page_state+0x1d/0x80 [ 109.162706] __vfs_write+0xc4/0x350 [ 109.164911] ? kernel_read+0xa0/0xa0 [ 109.167121] ? path_openat+0x1b10/0x1b10 [ 109.169355] ? fsnotify+0x899/0x8f0 [ 109.171567] ? fsnotify_unmount_inodes+0x170/0x170 [ 109.174145] ? __fget+0xa8/0xf0 [ 109.177110] vfs_write+0xf7/0x280 [ 109.179532] SyS_write+0xa1/0x120 [ 109.181885] ? SyS_read+0x120/0x120 [ 109.184482] ? compat_start_thread+0x60/0x60 [ 109.187124] ? SyS_read+0x120/0x120 [ 109.189548] do_syscall_64+0xeb/0x250 [ 109.192178] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 109.194725] RIP: 0033:0x7fabb61ebe99 [ 109.197040] RSP: 002b:00007fabb68d5e98 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 [ 109.200294] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fabb61ebe99 [ 109.203399] RDX: 0000000000000120 RSI: 00000000200001c0 RDI: 0000000000000004 [ 109.206548] RBP: 00007fabb68d5ec0 R08: 0000000000000000 R09: 0000000000000000 [ 109.209902] R10: 0000000000000000 R11: 0000000000000202 R12: 00007fabb68d5fc0 [ 109.213327] R13: 0000000000000000 R14: 00007fff40ab2430 R15: 00007fabb68d69c0 [ 109.216613] Code: 88 44 24 2c 0f b6 84 24 6e 01 00 00 88 44 24 2d 0f b6 84 24 69 01 00 00 88 44 24 2e 8b 44 24 60 89 44 24 30 e8 da f6 06 ff 31 c0 <66> 41 83 7c 24 20 1b 75 04 8b 44 24 64 48 8d 74 24 20 4c 89 e7 [ 109.223602] RIP: ucma_connect+0x138/0x1d0 RSP: ffff8801c8567a80 [ 109.226256] CR2: 0000000000000020 Fixes: 7521663 ("RDMA/cma: Export rdma cm interface to userspace") Reported-by: <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Dmole
pushed a commit
to Dmole/linux
that referenced
this pull request
Apr 20, 2018
commit e8980d6 upstream. Prior to access UCMA commands, the context should be initialized and connected to CM_ID with ucma_create_id(). In case user skips this step, he can provide non-valid ctx without CM_ID and cause to multiple NULL dereferences. Also there are situations where the create_id can be raced with other user access, ensure that the context is only shared to other threads once it is fully initialized to avoid the races. [ 109.088108] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 [ 109.090315] IP: ucma_connect+0x138/0x1d0 [ 109.092595] PGD 80000001dc02d067 P4D 80000001dc02d067 PUD 1da9ef067 PMD 0 [ 109.095384] Oops: 0000 [hardkernel#1] SMP KASAN PTI [ 109.097834] CPU: 0 PID: 663 Comm: uclose Tainted: G B 4.16.0-rc1-00062-g2975d5de6428 hardkernel#45 [ 109.100816] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 [ 109.105943] RIP: 0010:ucma_connect+0x138/0x1d0 [ 109.108850] RSP: 0018:ffff8801c8567a80 EFLAGS: 00010246 [ 109.111484] RAX: 0000000000000000 RBX: 1ffff100390acf50 RCX: ffffffff9d7812e2 [ 109.114496] RDX: 1ffffffff3f507a5 RSI: 0000000000000297 RDI: 0000000000000297 [ 109.117490] RBP: ffff8801daa15600 R08: 0000000000000000 R09: ffffed00390aceeb [ 109.120429] R10: 0000000000000001 R11: ffffed00390aceea R12: 0000000000000000 [ 109.123318] R13: 0000000000000120 R14: ffff8801de6459c0 R15: 0000000000000118 [ 109.126221] FS: 00007fabb68d6700(0000) GS:ffff8801e5c00000(0000) knlGS:0000000000000000 [ 109.129468] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 109.132523] CR2: 0000000000000020 CR3: 00000001d45d8003 CR4: 00000000003606b0 [ 109.135573] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 109.138716] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 109.142057] Call Trace: [ 109.144160] ? ucma_listen+0x110/0x110 [ 109.146386] ? wake_up_q+0x59/0x90 [ 109.148853] ? futex_wake+0x10b/0x2a0 [ 109.151297] ? save_stack+0x89/0xb0 [ 109.153489] ? _copy_from_user+0x5e/0x90 [ 109.155500] ucma_write+0x174/0x1f0 [ 109.157933] ? ucma_resolve_route+0xf0/0xf0 [ 109.160389] ? __mod_node_page_state+0x1d/0x80 [ 109.162706] __vfs_write+0xc4/0x350 [ 109.164911] ? kernel_read+0xa0/0xa0 [ 109.167121] ? path_openat+0x1b10/0x1b10 [ 109.169355] ? fsnotify+0x899/0x8f0 [ 109.171567] ? fsnotify_unmount_inodes+0x170/0x170 [ 109.174145] ? __fget+0xa8/0xf0 [ 109.177110] vfs_write+0xf7/0x280 [ 109.179532] SyS_write+0xa1/0x120 [ 109.181885] ? SyS_read+0x120/0x120 [ 109.184482] ? compat_start_thread+0x60/0x60 [ 109.187124] ? SyS_read+0x120/0x120 [ 109.189548] do_syscall_64+0xeb/0x250 [ 109.192178] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 109.194725] RIP: 0033:0x7fabb61ebe99 [ 109.197040] RSP: 002b:00007fabb68d5e98 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 [ 109.200294] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fabb61ebe99 [ 109.203399] RDX: 0000000000000120 RSI: 00000000200001c0 RDI: 0000000000000004 [ 109.206548] RBP: 00007fabb68d5ec0 R08: 0000000000000000 R09: 0000000000000000 [ 109.209902] R10: 0000000000000000 R11: 0000000000000202 R12: 00007fabb68d5fc0 [ 109.213327] R13: 0000000000000000 R14: 00007fff40ab2430 R15: 00007fabb68d69c0 [ 109.216613] Code: 88 44 24 2c 0f b6 84 24 6e 01 00 00 88 44 24 2d 0f b6 84 24 69 01 00 00 88 44 24 2e 8b 44 24 60 89 44 24 30 e8 da f6 06 ff 31 c0 <66> 41 83 7c 24 20 1b 75 04 8b 44 24 64 48 8d 74 24 20 4c 89 e7 [ 109.223602] RIP: ucma_connect+0x138/0x1d0 RSP: ffff8801c8567a80 [ 109.226256] CR2: 0000000000000020 Fixes: 7521663 ("RDMA/cma: Export rdma cm interface to userspace") Reported-by: <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
mdrjr
pushed a commit
that referenced
this pull request
May 22, 2018
[ Upstream commit af50e4b ] syzbot caught an infinite recursion in nsh_gso_segment(). Problem here is that we need to make sure the NSH header is of reasonable length. BUG: MAX_LOCK_DEPTH too low! turning off the locking correctness validator. depth: 48 max: 48! 48 locks held by syz-executor0/10189: #0: (ptrval) (rcu_read_lock_bh){....}, at: __dev_queue_xmit+0x30f/0x34c0 net/core/dev.c:3517 #1: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #1: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #2: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #2: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #3: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #3: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #4: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #4: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #5: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #5: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #6: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #6: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #7: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #7: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #8: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #8: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #9: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #9: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #10: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #10: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #11: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #11: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #12: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #12: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #13: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #13: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #14: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #14: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #15: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #15: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #16: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #16: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #17: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #17: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #18: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #18: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #19: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #19: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #20: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #20: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #21: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #21: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #22: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #22: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #23: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #23: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #24: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #24: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #25: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #25: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #26: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #26: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #27: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #27: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #28: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #28: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #29: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #29: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #30: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #30: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #31: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #31: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 dccp_close: ABORT with 65423 bytes unread #32: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #32: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #33: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #33: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #34: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #34: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #35: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #35: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #36: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #36: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #37: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #37: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #38: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #38: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #39: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #39: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #40: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #40: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #41: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #41: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #42: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #42: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #43: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #43: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #44: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #44: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #45: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #45: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #46: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #46: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #47: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #47: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 INFO: lockdep is turned off. CPU: 1 PID: 10189 Comm: syz-executor0 Not tainted 4.17.0-rc2+ #26 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b9/0x294 lib/dump_stack.c:113 __lock_acquire+0x1788/0x5140 kernel/locking/lockdep.c:3449 lock_acquire+0x1dc/0x520 kernel/locking/lockdep.c:3920 rcu_lock_acquire include/linux/rcupdate.h:246 [inline] rcu_read_lock include/linux/rcupdate.h:632 [inline] skb_mac_gso_segment+0x25b/0x720 net/core/dev.c:2789 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 __skb_gso_segment+0x3bb/0x870 net/core/dev.c:2865 skb_gso_segment include/linux/netdevice.h:4025 [inline] validate_xmit_skb+0x54d/0xd90 net/core/dev.c:3118 validate_xmit_skb_list+0xbf/0x120 net/core/dev.c:3168 sch_direct_xmit+0x354/0x11e0 net/sched/sch_generic.c:312 qdisc_restart net/sched/sch_generic.c:399 [inline] __qdisc_run+0x741/0x1af0 net/sched/sch_generic.c:410 __dev_xmit_skb net/core/dev.c:3243 [inline] __dev_queue_xmit+0x28ea/0x34c0 net/core/dev.c:3551 dev_queue_xmit+0x17/0x20 net/core/dev.c:3616 packet_snd net/packet/af_packet.c:2951 [inline] packet_sendmsg+0x40f8/0x6070 net/packet/af_packet.c:2976 sock_sendmsg_nosec net/socket.c:629 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:639 __sys_sendto+0x3d7/0x670 net/socket.c:1789 __do_sys_sendto net/socket.c:1801 [inline] __se_sys_sendto net/socket.c:1797 [inline] __x64_sys_sendto+0xe1/0x1a0 net/socket.c:1797 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: c411ed8 ("nsh: add GSO support") Signed-off-by: Eric Dumazet <[email protected]> Cc: Jiri Benc <[email protected]> Reported-by: syzbot <[email protected]> Acked-by: Jiri Benc <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
mdrjr
pushed a commit
that referenced
this pull request
Jun 18, 2018
commit e8980d6 upstream. Prior to access UCMA commands, the context should be initialized and connected to CM_ID with ucma_create_id(). In case user skips this step, he can provide non-valid ctx without CM_ID and cause to multiple NULL dereferences. Also there are situations where the create_id can be raced with other user access, ensure that the context is only shared to other threads once it is fully initialized to avoid the races. [ 109.088108] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 [ 109.090315] IP: ucma_connect+0x138/0x1d0 [ 109.092595] PGD 80000001dc02d067 P4D 80000001dc02d067 PUD 1da9ef067 PMD 0 [ 109.095384] Oops: 0000 [#1] SMP KASAN PTI [ 109.097834] CPU: 0 PID: 663 Comm: uclose Tainted: G B 4.16.0-rc1-00062-g2975d5de6428 #45 [ 109.100816] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 [ 109.105943] RIP: 0010:ucma_connect+0x138/0x1d0 [ 109.108850] RSP: 0018:ffff8801c8567a80 EFLAGS: 00010246 [ 109.111484] RAX: 0000000000000000 RBX: 1ffff100390acf50 RCX: ffffffff9d7812e2 [ 109.114496] RDX: 1ffffffff3f507a5 RSI: 0000000000000297 RDI: 0000000000000297 [ 109.117490] RBP: ffff8801daa15600 R08: 0000000000000000 R09: ffffed00390aceeb [ 109.120429] R10: 0000000000000001 R11: ffffed00390aceea R12: 0000000000000000 [ 109.123318] R13: 0000000000000120 R14: ffff8801de6459c0 R15: 0000000000000118 [ 109.126221] FS: 00007fabb68d6700(0000) GS:ffff8801e5c00000(0000) knlGS:0000000000000000 [ 109.129468] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 109.132523] CR2: 0000000000000020 CR3: 00000001d45d8003 CR4: 00000000003606b0 [ 109.135573] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 109.138716] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 109.142057] Call Trace: [ 109.144160] ? ucma_listen+0x110/0x110 [ 109.146386] ? wake_up_q+0x59/0x90 [ 109.148853] ? futex_wake+0x10b/0x2a0 [ 109.151297] ? save_stack+0x89/0xb0 [ 109.153489] ? _copy_from_user+0x5e/0x90 [ 109.155500] ucma_write+0x174/0x1f0 [ 109.157933] ? ucma_resolve_route+0xf0/0xf0 [ 109.160389] ? __mod_node_page_state+0x1d/0x80 [ 109.162706] __vfs_write+0xc4/0x350 [ 109.164911] ? kernel_read+0xa0/0xa0 [ 109.167121] ? path_openat+0x1b10/0x1b10 [ 109.169355] ? fsnotify+0x899/0x8f0 [ 109.171567] ? fsnotify_unmount_inodes+0x170/0x170 [ 109.174145] ? __fget+0xa8/0xf0 [ 109.177110] vfs_write+0xf7/0x280 [ 109.179532] SyS_write+0xa1/0x120 [ 109.181885] ? SyS_read+0x120/0x120 [ 109.184482] ? compat_start_thread+0x60/0x60 [ 109.187124] ? SyS_read+0x120/0x120 [ 109.189548] do_syscall_64+0xeb/0x250 [ 109.192178] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 109.194725] RIP: 0033:0x7fabb61ebe99 [ 109.197040] RSP: 002b:00007fabb68d5e98 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 [ 109.200294] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fabb61ebe99 [ 109.203399] RDX: 0000000000000120 RSI: 00000000200001c0 RDI: 0000000000000004 [ 109.206548] RBP: 00007fabb68d5ec0 R08: 0000000000000000 R09: 0000000000000000 [ 109.209902] R10: 0000000000000000 R11: 0000000000000202 R12: 00007fabb68d5fc0 [ 109.213327] R13: 0000000000000000 R14: 00007fff40ab2430 R15: 00007fabb68d69c0 [ 109.216613] Code: 88 44 24 2c 0f b6 84 24 6e 01 00 00 88 44 24 2d 0f b6 84 24 69 01 00 00 88 44 24 2e 8b 44 24 60 89 44 24 30 e8 da f6 06 ff 31 c0 <66> 41 83 7c 24 20 1b 75 04 8b 44 24 64 48 8d 74 24 20 4c 89 e7 [ 109.223602] RIP: ucma_connect+0x138/0x1d0 RSP: ffff8801c8567a80 [ 109.226256] CR2: 0000000000000020 Fixes: 7521663 ("RDMA/cma: Export rdma cm interface to userspace") Reported-by: <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]> [bwh: Backported to 3.16: adjust context] Signed-off-by: Ben Hutchings <[email protected]>
Dmole
pushed a commit
to Dmole/linux
that referenced
this pull request
Jul 8, 2018
[ Upstream commit 52f9675 ] syzkaller reports for buffer overflow for interface name when starting sync daemons [1] What we do is that we copy user structure into larger stack buffer but later we search NUL past the stack buffer. The same happens for sched_name when adding/editing virtual server. We are restricted by IP_VS_SCHEDNAME_MAXLEN and IP_VS_IFNAME_MAXLEN being used as size in include/uapi/linux/ip_vs.h, so they include the space for NUL. As using strlcpy is wrong for unsafe source, replace it with strscpy and add checks to return EINVAL if source string is not NUL-terminated. The incomplete strlcpy fix comes from 2.6.13. For the netlink interface reduce the len parameter for IPVS_DAEMON_ATTR_MCAST_IFN and IPVS_SVC_ATTR_SCHED_NAME, so that we get proper EINVAL. [1] kernel BUG at lib/string.c:1052! invalid opcode: 0000 [hardkernel#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 373 Comm: syz-executor936 Not tainted 4.17.0-rc4+ hardkernel#45 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:fortify_panic+0x13/0x20 lib/string.c:1051 RSP: 0018:ffff8801c976f800 EFLAGS: 00010282 RAX: 0000000000000022 RBX: 0000000000000040 RCX: 0000000000000000 RDX: 0000000000000022 RSI: ffffffff8160f6f1 RDI: ffffed00392edef6 RBP: ffff8801c976f800 R08: ffff8801cf4c62c0 R09: ffffed003b5e4fb0 R10: ffffed003b5e4fb0 R11: ffff8801daf27d87 R12: ffff8801c976fa20 R13: ffff8801c976fae4 R14: ffff8801c976fae0 R15: 000000000000048b FS: 00007fd99f75e700(0000) GS:ffff8801daf00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000200001c0 CR3: 00000001d6843000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: strlen include/linux/string.h:270 [inline] strlcpy include/linux/string.h:293 [inline] do_ip_vs_set_ctl+0x31c/0x1d00 net/netfilter/ipvs/ip_vs_ctl.c:2388 nf_sockopt net/netfilter/nf_sockopt.c:106 [inline] nf_setsockopt+0x7d/0xd0 net/netfilter/nf_sockopt.c:115 ip_setsockopt+0xd8/0xf0 net/ipv4/ip_sockglue.c:1253 udp_setsockopt+0x62/0xa0 net/ipv4/udp.c:2487 ipv6_setsockopt+0x149/0x170 net/ipv6/ipv6_sockglue.c:917 tcp_setsockopt+0x93/0xe0 net/ipv4/tcp.c:3057 sock_common_setsockopt+0x9a/0xe0 net/core/sock.c:3046 __sys_setsockopt+0x1bd/0x390 net/socket.c:1903 __do_sys_setsockopt net/socket.c:1914 [inline] __se_sys_setsockopt net/socket.c:1911 [inline] __x64_sys_setsockopt+0xbe/0x150 net/socket.c:1911 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x447369 RSP: 002b:00007fd99f75dda8 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 00000000006e39e4 RCX: 0000000000447369 RDX: 000000000000048b RSI: 0000000000000000 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000018 R09: 0000000000000000 R10: 00000000200001c0 R11: 0000000000000246 R12: 00000000006e39e0 R13: 75a1ff93f0896195 R14: 6f745f3168746576 R15: 0000000000000001 Code: 08 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 0b 48 89 df e8 d2 8f 48 fa eb de 55 48 89 fe 48 c7 c7 60 65 64 88 48 89 e5 e8 91 dd f3 f9 <0f> 0b 90 90 90 90 90 90 90 90 90 90 90 55 48 89 e5 41 57 41 56 RIP: fortify_panic+0x13/0x20 lib/string.c:1051 RSP: ffff8801c976f800 Reported-and-tested-by: [email protected] Fixes: e4ff675 ("ipvs: add sync_maxlen parameter for the sync daemon") Fixes: 4da62fc ("[IPVS]: Fix for overflows") Signed-off-by: Julian Anastasov <[email protected]> Acked-by: Simon Horman <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Owersun
pushed a commit
to Owersun/linux-hardkernel
that referenced
this pull request
Jul 14, 2018
[ Upstream commit 52f9675 ] syzkaller reports for buffer overflow for interface name when starting sync daemons [1] What we do is that we copy user structure into larger stack buffer but later we search NUL past the stack buffer. The same happens for sched_name when adding/editing virtual server. We are restricted by IP_VS_SCHEDNAME_MAXLEN and IP_VS_IFNAME_MAXLEN being used as size in include/uapi/linux/ip_vs.h, so they include the space for NUL. As using strlcpy is wrong for unsafe source, replace it with strscpy and add checks to return EINVAL if source string is not NUL-terminated. The incomplete strlcpy fix comes from 2.6.13. For the netlink interface reduce the len parameter for IPVS_DAEMON_ATTR_MCAST_IFN and IPVS_SVC_ATTR_SCHED_NAME, so that we get proper EINVAL. [1] kernel BUG at lib/string.c:1052! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 373 Comm: syz-executor936 Not tainted 4.17.0-rc4+ hardkernel#45 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:fortify_panic+0x13/0x20 lib/string.c:1051 RSP: 0018:ffff8801c976f800 EFLAGS: 00010282 RAX: 0000000000000022 RBX: 0000000000000040 RCX: 0000000000000000 RDX: 0000000000000022 RSI: ffffffff8160f6f1 RDI: ffffed00392edef6 RBP: ffff8801c976f800 R08: ffff8801cf4c62c0 R09: ffffed003b5e4fb0 R10: ffffed003b5e4fb0 R11: ffff8801daf27d87 R12: ffff8801c976fa20 R13: ffff8801c976fae4 R14: ffff8801c976fae0 R15: 000000000000048b FS: 00007fd99f75e700(0000) GS:ffff8801daf00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000200001c0 CR3: 00000001d6843000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: strlen include/linux/string.h:270 [inline] strlcpy include/linux/string.h:293 [inline] do_ip_vs_set_ctl+0x31c/0x1d00 net/netfilter/ipvs/ip_vs_ctl.c:2388 nf_sockopt net/netfilter/nf_sockopt.c:106 [inline] nf_setsockopt+0x7d/0xd0 net/netfilter/nf_sockopt.c:115 ip_setsockopt+0xd8/0xf0 net/ipv4/ip_sockglue.c:1253 udp_setsockopt+0x62/0xa0 net/ipv4/udp.c:2487 ipv6_setsockopt+0x149/0x170 net/ipv6/ipv6_sockglue.c:917 tcp_setsockopt+0x93/0xe0 net/ipv4/tcp.c:3057 sock_common_setsockopt+0x9a/0xe0 net/core/sock.c:3046 __sys_setsockopt+0x1bd/0x390 net/socket.c:1903 __do_sys_setsockopt net/socket.c:1914 [inline] __se_sys_setsockopt net/socket.c:1911 [inline] __x64_sys_setsockopt+0xbe/0x150 net/socket.c:1911 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x447369 RSP: 002b:00007fd99f75dda8 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 00000000006e39e4 RCX: 0000000000447369 RDX: 000000000000048b RSI: 0000000000000000 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000018 R09: 0000000000000000 R10: 00000000200001c0 R11: 0000000000000246 R12: 00000000006e39e0 R13: 75a1ff93f0896195 R14: 6f745f3168746576 R15: 0000000000000001 Code: 08 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 0b 48 89 df e8 d2 8f 48 fa eb de 55 48 89 fe 48 c7 c7 60 65 64 88 48 89 e5 e8 91 dd f3 f9 <0f> 0b 90 90 90 90 90 90 90 90 90 90 90 55 48 89 e5 41 57 41 56 RIP: fortify_panic+0x13/0x20 lib/string.c:1051 RSP: ffff8801c976f800 Reported-and-tested-by: [email protected] Fixes: e4ff675 ("ipvs: add sync_maxlen parameter for the sync daemon") Fixes: 4da62fc ("[IPVS]: Fix for overflows") Signed-off-by: Julian Anastasov <[email protected]> Acked-by: Simon Horman <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Owersun
pushed a commit
to Owersun/linux-hardkernel
that referenced
this pull request
Sep 26, 2018
[ Upstream commit 52f9675 ] syzkaller reports for buffer overflow for interface name when starting sync daemons [1] What we do is that we copy user structure into larger stack buffer but later we search NUL past the stack buffer. The same happens for sched_name when adding/editing virtual server. We are restricted by IP_VS_SCHEDNAME_MAXLEN and IP_VS_IFNAME_MAXLEN being used as size in include/uapi/linux/ip_vs.h, so they include the space for NUL. As using strlcpy is wrong for unsafe source, replace it with strscpy and add checks to return EINVAL if source string is not NUL-terminated. The incomplete strlcpy fix comes from 2.6.13. For the netlink interface reduce the len parameter for IPVS_DAEMON_ATTR_MCAST_IFN and IPVS_SVC_ATTR_SCHED_NAME, so that we get proper EINVAL. [1] kernel BUG at lib/string.c:1052! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 373 Comm: syz-executor936 Not tainted 4.17.0-rc4+ hardkernel#45 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:fortify_panic+0x13/0x20 lib/string.c:1051 RSP: 0018:ffff8801c976f800 EFLAGS: 00010282 RAX: 0000000000000022 RBX: 0000000000000040 RCX: 0000000000000000 RDX: 0000000000000022 RSI: ffffffff8160f6f1 RDI: ffffed00392edef6 RBP: ffff8801c976f800 R08: ffff8801cf4c62c0 R09: ffffed003b5e4fb0 R10: ffffed003b5e4fb0 R11: ffff8801daf27d87 R12: ffff8801c976fa20 R13: ffff8801c976fae4 R14: ffff8801c976fae0 R15: 000000000000048b FS: 00007fd99f75e700(0000) GS:ffff8801daf00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000200001c0 CR3: 00000001d6843000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: strlen include/linux/string.h:270 [inline] strlcpy include/linux/string.h:293 [inline] do_ip_vs_set_ctl+0x31c/0x1d00 net/netfilter/ipvs/ip_vs_ctl.c:2388 nf_sockopt net/netfilter/nf_sockopt.c:106 [inline] nf_setsockopt+0x7d/0xd0 net/netfilter/nf_sockopt.c:115 ip_setsockopt+0xd8/0xf0 net/ipv4/ip_sockglue.c:1253 udp_setsockopt+0x62/0xa0 net/ipv4/udp.c:2487 ipv6_setsockopt+0x149/0x170 net/ipv6/ipv6_sockglue.c:917 tcp_setsockopt+0x93/0xe0 net/ipv4/tcp.c:3057 sock_common_setsockopt+0x9a/0xe0 net/core/sock.c:3046 __sys_setsockopt+0x1bd/0x390 net/socket.c:1903 __do_sys_setsockopt net/socket.c:1914 [inline] __se_sys_setsockopt net/socket.c:1911 [inline] __x64_sys_setsockopt+0xbe/0x150 net/socket.c:1911 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x447369 RSP: 002b:00007fd99f75dda8 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 00000000006e39e4 RCX: 0000000000447369 RDX: 000000000000048b RSI: 0000000000000000 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000018 R09: 0000000000000000 R10: 00000000200001c0 R11: 0000000000000246 R12: 00000000006e39e0 R13: 75a1ff93f0896195 R14: 6f745f3168746576 R15: 0000000000000001 Code: 08 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 0b 48 89 df e8 d2 8f 48 fa eb de 55 48 89 fe 48 c7 c7 60 65 64 88 48 89 e5 e8 91 dd f3 f9 <0f> 0b 90 90 90 90 90 90 90 90 90 90 90 55 48 89 e5 41 57 41 56 RIP: fortify_panic+0x13/0x20 lib/string.c:1051 RSP: ffff8801c976f800 Reported-and-tested-by: [email protected] Fixes: e4ff675 ("ipvs: add sync_maxlen parameter for the sync daemon") Fixes: 4da62fc ("[IPVS]: Fix for overflows") Signed-off-by: Julian Anastasov <[email protected]> Acked-by: Simon Horman <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
mdrjr
pushed a commit
that referenced
this pull request
Oct 23, 2018
commit 52f9675 upstream. syzkaller reports for buffer overflow for interface name when starting sync daemons [1] What we do is that we copy user structure into larger stack buffer but later we search NUL past the stack buffer. The same happens for sched_name when adding/editing virtual server. We are restricted by IP_VS_SCHEDNAME_MAXLEN and IP_VS_IFNAME_MAXLEN being used as size in include/uapi/linux/ip_vs.h, so they include the space for NUL. As using strlcpy is wrong for unsafe source, replace it with strscpy and add checks to return EINVAL if source string is not NUL-terminated. The incomplete strlcpy fix comes from 2.6.13. For the netlink interface reduce the len parameter for IPVS_DAEMON_ATTR_MCAST_IFN and IPVS_SVC_ATTR_SCHED_NAME, so that we get proper EINVAL. [1] kernel BUG at lib/string.c:1052! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 373 Comm: syz-executor936 Not tainted 4.17.0-rc4+ #45 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:fortify_panic+0x13/0x20 lib/string.c:1051 RSP: 0018:ffff8801c976f800 EFLAGS: 00010282 RAX: 0000000000000022 RBX: 0000000000000040 RCX: 0000000000000000 RDX: 0000000000000022 RSI: ffffffff8160f6f1 RDI: ffffed00392edef6 RBP: ffff8801c976f800 R08: ffff8801cf4c62c0 R09: ffffed003b5e4fb0 R10: ffffed003b5e4fb0 R11: ffff8801daf27d87 R12: ffff8801c976fa20 R13: ffff8801c976fae4 R14: ffff8801c976fae0 R15: 000000000000048b FS: 00007fd99f75e700(0000) GS:ffff8801daf00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000200001c0 CR3: 00000001d6843000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: strlen include/linux/string.h:270 [inline] strlcpy include/linux/string.h:293 [inline] do_ip_vs_set_ctl+0x31c/0x1d00 net/netfilter/ipvs/ip_vs_ctl.c:2388 nf_sockopt net/netfilter/nf_sockopt.c:106 [inline] nf_setsockopt+0x7d/0xd0 net/netfilter/nf_sockopt.c:115 ip_setsockopt+0xd8/0xf0 net/ipv4/ip_sockglue.c:1253 udp_setsockopt+0x62/0xa0 net/ipv4/udp.c:2487 ipv6_setsockopt+0x149/0x170 net/ipv6/ipv6_sockglue.c:917 tcp_setsockopt+0x93/0xe0 net/ipv4/tcp.c:3057 sock_common_setsockopt+0x9a/0xe0 net/core/sock.c:3046 __sys_setsockopt+0x1bd/0x390 net/socket.c:1903 __do_sys_setsockopt net/socket.c:1914 [inline] __se_sys_setsockopt net/socket.c:1911 [inline] __x64_sys_setsockopt+0xbe/0x150 net/socket.c:1911 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x447369 RSP: 002b:00007fd99f75dda8 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 00000000006e39e4 RCX: 0000000000447369 RDX: 000000000000048b RSI: 0000000000000000 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000018 R09: 0000000000000000 R10: 00000000200001c0 R11: 0000000000000246 R12: 00000000006e39e0 R13: 75a1ff93f0896195 R14: 6f745f3168746576 R15: 0000000000000001 Code: 08 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 0b 48 89 df e8 d2 8f 48 fa eb de 55 48 89 fe 48 c7 c7 60 65 64 88 48 89 e5 e8 91 dd f3 f9 <0f> 0b 90 90 90 90 90 90 90 90 90 90 90 55 48 89 e5 41 57 41 56 RIP: fortify_panic+0x13/0x20 lib/string.c:1051 RSP: ffff8801c976f800 Reported-and-tested-by: [email protected] Fixes: e4ff675 ("ipvs: add sync_maxlen parameter for the sync daemon") Fixes: 4da62fc ("[IPVS]: Fix for overflows") Signed-off-by: Julian Anastasov <[email protected]> Acked-by: Simon Horman <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> [bwh: Backported to 3.16: Interface name is copied in start_sync_thread(), not do_ip_vs_set_ctl()] Signed-off-by: Ben Hutchings <[email protected]>
mihailescu2m
pushed a commit
to mihailescu2m/linux
that referenced
this pull request
Feb 27, 2019
KASAN has found use-after-free in fixed_mdio_bus_init, commit 0c692d0 ("drivers/net/phy/mdio_bus.c: call put_device on device_register() failure") call put_device() while device_register() fails,give up the last reference to the device and allow mdiobus_release to be executed ,kfreeing the bus. However in most drives, mdiobus_free be called to free the bus while mdiobus_register fails. use-after-free occurs when access bus again, this patch revert it to let mdiobus_free free the bus. KASAN report details as below: BUG: KASAN: use-after-free in mdiobus_free+0x85/0x90 drivers/net/phy/mdio_bus.c:482 Read of size 4 at addr ffff8881dc824d78 by task syz-executor.0/3524 CPU: 1 PID: 3524 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ hardkernel#45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 mdiobus_free+0x85/0x90 drivers/net/phy/mdio_bus.c:482 fixed_mdio_bus_init+0x283/0x1000 [fixed_phy] ? 0xffffffffc0e40000 ? 0xffffffffc0e40000 ? 0xffffffffc0e40000 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f6215c19c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000080 RDI: 0000000000000003 RBP: 00007f6215c19c70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f6215c1a6bc R13: 00000000004bcefb R14: 00000000006f7030 R15: 0000000000000004 Allocated by task 3524: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 kmalloc include/linux/slab.h:545 [inline] kzalloc include/linux/slab.h:740 [inline] mdiobus_alloc_size+0x54/0x1b0 drivers/net/phy/mdio_bus.c:143 fixed_mdio_bus_init+0x163/0x1000 [fixed_phy] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 3524: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kfree+0xe1/0x270 mm/slub.c:3938 device_release+0x78/0x200 drivers/base/core.c:919 kobject_cleanup lib/kobject.c:662 [inline] kobject_release lib/kobject.c:691 [inline] kref_put include/linux/kref.h:67 [inline] kobject_put+0x146/0x240 lib/kobject.c:708 put_device+0x1c/0x30 drivers/base/core.c:2060 __mdiobus_register+0x483/0x560 drivers/net/phy/mdio_bus.c:382 fixed_mdio_bus_init+0x26b/0x1000 [fixed_phy] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881dc824c80 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 248 bytes inside of 2048-byte region [ffff8881dc824c80, ffff8881dc825480) The buggy address belongs to the page: page:ffffea0007720800 count:1 mapcount:0 mapping:ffff8881f6c02800 index:0x0 compound_mapcount: 0 flags: 0x2fffc0000010200(slab|head) raw: 02fffc0000010200 0000000000000000 0000000500000001 ffff8881f6c02800 raw: 0000000000000000 00000000800f000f 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881dc824c00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8881dc824c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881dc824d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881dc824d80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881dc824e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: 0c692d0 ("drivers/net/phy/mdio_bus.c: call put_device on device_register() failure") Signed-off-by: YueHaibing <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
mihailescu2m
pushed a commit
to mihailescu2m/linux
that referenced
this pull request
Mar 7, 2019
KASAN report this: BUG: KASAN: null-ptr-deref in nfc_llcp_build_gb+0x37f/0x540 [nfc] Read of size 3 at addr 0000000000000000 by task syz-executor.0/5401 CPU: 0 PID: 5401 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ hardkernel#45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 kasan_report+0x171/0x18d mm/kasan/report.c:321 memcpy+0x1f/0x50 mm/kasan/common.c:130 nfc_llcp_build_gb+0x37f/0x540 [nfc] nfc_llcp_register_device+0x6eb/0xb50 [nfc] nfc_register_device+0x50/0x1d0 [nfc] nfcsim_device_new+0x394/0x67d [nfcsim] ? 0xffffffffc1080000 nfcsim_init+0x6b/0x1000 [nfcsim] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f9cb79dcc58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000280 RDI: 0000000000000003 RBP: 00007f9cb79dcc70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f9cb79dd6bc R13: 00000000004bcefb R14: 00000000006f7030 R15: 0000000000000004 nfc_llcp_build_tlv will return NULL on fails, caller should check it, otherwise will trigger a NULL dereference. Reported-by: Hulk Robot <[email protected]> Fixes: eda21f1 ("NFC: Set MIU and RW values from CONNECT and CC LLCP frames") Fixes: d646960 ("NFC: Initial LLCP support") Signed-off-by: YueHaibing <[email protected]> Signed-off-by: David S. Miller <[email protected]>
mdrjr
pushed a commit
that referenced
this pull request
Mar 21, 2019
[ Upstream commit 58bdd54 ] KASAN report this: BUG: KASAN: null-ptr-deref in nfc_llcp_build_gb+0x37f/0x540 [nfc] Read of size 3 at addr 0000000000000000 by task syz-executor.0/5401 CPU: 0 PID: 5401 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 kasan_report+0x171/0x18d mm/kasan/report.c:321 memcpy+0x1f/0x50 mm/kasan/common.c:130 nfc_llcp_build_gb+0x37f/0x540 [nfc] nfc_llcp_register_device+0x6eb/0xb50 [nfc] nfc_register_device+0x50/0x1d0 [nfc] nfcsim_device_new+0x394/0x67d [nfcsim] ? 0xffffffffc1080000 nfcsim_init+0x6b/0x1000 [nfcsim] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f9cb79dcc58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000280 RDI: 0000000000000003 RBP: 00007f9cb79dcc70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f9cb79dd6bc R13: 00000000004bcefb R14: 00000000006f7030 R15: 0000000000000004 nfc_llcp_build_tlv will return NULL on fails, caller should check it, otherwise will trigger a NULL dereference. Reported-by: Hulk Robot <[email protected]> Fixes: eda21f1 ("NFC: Set MIU and RW values from CONNECT and CC LLCP frames") Fixes: d646960 ("NFC: Initial LLCP support") Signed-off-by: YueHaibing <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
mdrjr
pushed a commit
that referenced
this pull request
Mar 21, 2019
[ Upstream commit 6ff7b06 ] KASAN has found use-after-free in fixed_mdio_bus_init, commit 0c692d0 ("drivers/net/phy/mdio_bus.c: call put_device on device_register() failure") call put_device() while device_register() fails,give up the last reference to the device and allow mdiobus_release to be executed ,kfreeing the bus. However in most drives, mdiobus_free be called to free the bus while mdiobus_register fails. use-after-free occurs when access bus again, this patch revert it to let mdiobus_free free the bus. KASAN report details as below: BUG: KASAN: use-after-free in mdiobus_free+0x85/0x90 drivers/net/phy/mdio_bus.c:482 Read of size 4 at addr ffff8881dc824d78 by task syz-executor.0/3524 CPU: 1 PID: 3524 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 mdiobus_free+0x85/0x90 drivers/net/phy/mdio_bus.c:482 fixed_mdio_bus_init+0x283/0x1000 [fixed_phy] ? 0xffffffffc0e40000 ? 0xffffffffc0e40000 ? 0xffffffffc0e40000 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f6215c19c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000080 RDI: 0000000000000003 RBP: 00007f6215c19c70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f6215c1a6bc R13: 00000000004bcefb R14: 00000000006f7030 R15: 0000000000000004 Allocated by task 3524: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 kmalloc include/linux/slab.h:545 [inline] kzalloc include/linux/slab.h:740 [inline] mdiobus_alloc_size+0x54/0x1b0 drivers/net/phy/mdio_bus.c:143 fixed_mdio_bus_init+0x163/0x1000 [fixed_phy] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 3524: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kfree+0xe1/0x270 mm/slub.c:3938 device_release+0x78/0x200 drivers/base/core.c:919 kobject_cleanup lib/kobject.c:662 [inline] kobject_release lib/kobject.c:691 [inline] kref_put include/linux/kref.h:67 [inline] kobject_put+0x146/0x240 lib/kobject.c:708 put_device+0x1c/0x30 drivers/base/core.c:2060 __mdiobus_register+0x483/0x560 drivers/net/phy/mdio_bus.c:382 fixed_mdio_bus_init+0x26b/0x1000 [fixed_phy] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881dc824c80 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 248 bytes inside of 2048-byte region [ffff8881dc824c80, ffff8881dc825480) The buggy address belongs to the page: page:ffffea0007720800 count:1 mapcount:0 mapping:ffff8881f6c02800 index:0x0 compound_mapcount: 0 flags: 0x2fffc0000010200(slab|head) raw: 02fffc0000010200 0000000000000000 0000000500000001 ffff8881f6c02800 raw: 0000000000000000 00000000800f000f 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881dc824c00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8881dc824c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881dc824d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881dc824d80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881dc824e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: 0c692d0 ("drivers/net/phy/mdio_bus.c: call put_device on device_register() failure") Signed-off-by: YueHaibing <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
mdrjr
pushed a commit
that referenced
this pull request
Apr 16, 2019
[ Upstream commit 58bdd54 ] KASAN report this: BUG: KASAN: null-ptr-deref in nfc_llcp_build_gb+0x37f/0x540 [nfc] Read of size 3 at addr 0000000000000000 by task syz-executor.0/5401 CPU: 0 PID: 5401 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 kasan_report+0x171/0x18d mm/kasan/report.c:321 memcpy+0x1f/0x50 mm/kasan/common.c:130 nfc_llcp_build_gb+0x37f/0x540 [nfc] nfc_llcp_register_device+0x6eb/0xb50 [nfc] nfc_register_device+0x50/0x1d0 [nfc] nfcsim_device_new+0x394/0x67d [nfcsim] ? 0xffffffffc1080000 nfcsim_init+0x6b/0x1000 [nfcsim] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f9cb79dcc58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000280 RDI: 0000000000000003 RBP: 00007f9cb79dcc70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f9cb79dd6bc R13: 00000000004bcefb R14: 00000000006f7030 R15: 0000000000000004 nfc_llcp_build_tlv will return NULL on fails, caller should check it, otherwise will trigger a NULL dereference. Reported-by: Hulk Robot <[email protected]> Fixes: eda21f1 ("NFC: Set MIU and RW values from CONNECT and CC LLCP frames") Fixes: d646960 ("NFC: Initial LLCP support") Signed-off-by: YueHaibing <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
mdrjr
pushed a commit
that referenced
this pull request
Apr 16, 2019
[ Upstream commit 6ff7b06 ] KASAN has found use-after-free in fixed_mdio_bus_init, commit 0c692d0 ("drivers/net/phy/mdio_bus.c: call put_device on device_register() failure") call put_device() while device_register() fails,give up the last reference to the device and allow mdiobus_release to be executed ,kfreeing the bus. However in most drives, mdiobus_free be called to free the bus while mdiobus_register fails. use-after-free occurs when access bus again, this patch revert it to let mdiobus_free free the bus. KASAN report details as below: BUG: KASAN: use-after-free in mdiobus_free+0x85/0x90 drivers/net/phy/mdio_bus.c:482 Read of size 4 at addr ffff8881dc824d78 by task syz-executor.0/3524 CPU: 1 PID: 3524 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 mdiobus_free+0x85/0x90 drivers/net/phy/mdio_bus.c:482 fixed_mdio_bus_init+0x283/0x1000 [fixed_phy] ? 0xffffffffc0e40000 ? 0xffffffffc0e40000 ? 0xffffffffc0e40000 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f6215c19c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000080 RDI: 0000000000000003 RBP: 00007f6215c19c70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f6215c1a6bc R13: 00000000004bcefb R14: 00000000006f7030 R15: 0000000000000004 Allocated by task 3524: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 kmalloc include/linux/slab.h:545 [inline] kzalloc include/linux/slab.h:740 [inline] mdiobus_alloc_size+0x54/0x1b0 drivers/net/phy/mdio_bus.c:143 fixed_mdio_bus_init+0x163/0x1000 [fixed_phy] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 3524: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kfree+0xe1/0x270 mm/slub.c:3938 device_release+0x78/0x200 drivers/base/core.c:919 kobject_cleanup lib/kobject.c:662 [inline] kobject_release lib/kobject.c:691 [inline] kref_put include/linux/kref.h:67 [inline] kobject_put+0x146/0x240 lib/kobject.c:708 put_device+0x1c/0x30 drivers/base/core.c:2060 __mdiobus_register+0x483/0x560 drivers/net/phy/mdio_bus.c:382 fixed_mdio_bus_init+0x26b/0x1000 [fixed_phy] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881dc824c80 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 248 bytes inside of 2048-byte region [ffff8881dc824c80, ffff8881dc825480) The buggy address belongs to the page: page:ffffea0007720800 count:1 mapcount:0 mapping:ffff8881f6c02800 index:0x0 compound_mapcount: 0 flags: 0x2fffc0000010200(slab|head) raw: 02fffc0000010200 0000000000000000 0000000500000001 ffff8881f6c02800 raw: 0000000000000000 00000000800f000f 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881dc824c00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8881dc824c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881dc824d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881dc824d80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881dc824e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: 0c692d0 ("drivers/net/phy/mdio_bus.c: call put_device on device_register() failure") Signed-off-by: YueHaibing <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
mdrjr
pushed a commit
that referenced
this pull request
Apr 25, 2019
[ Upstream commit 6377f78 ] KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <[email protected]> Signed-off-by: YueHaibing <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
mdrjr
pushed a commit
that referenced
this pull request
May 17, 2019
commit 6ff7b06 upstream. KASAN has found use-after-free in fixed_mdio_bus_init, commit 0c692d0 ("drivers/net/phy/mdio_bus.c: call put_device on device_register() failure") call put_device() while device_register() fails,give up the last reference to the device and allow mdiobus_release to be executed ,kfreeing the bus. However in most drives, mdiobus_free be called to free the bus while mdiobus_register fails. use-after-free occurs when access bus again, this patch revert it to let mdiobus_free free the bus. KASAN report details as below: BUG: KASAN: use-after-free in mdiobus_free+0x85/0x90 drivers/net/phy/mdio_bus.c:482 Read of size 4 at addr ffff8881dc824d78 by task syz-executor.0/3524 CPU: 1 PID: 3524 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 mdiobus_free+0x85/0x90 drivers/net/phy/mdio_bus.c:482 fixed_mdio_bus_init+0x283/0x1000 [fixed_phy] ? 0xffffffffc0e40000 ? 0xffffffffc0e40000 ? 0xffffffffc0e40000 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f6215c19c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000080 RDI: 0000000000000003 RBP: 00007f6215c19c70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f6215c1a6bc R13: 00000000004bcefb R14: 00000000006f7030 R15: 0000000000000004 Allocated by task 3524: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 kmalloc include/linux/slab.h:545 [inline] kzalloc include/linux/slab.h:740 [inline] mdiobus_alloc_size+0x54/0x1b0 drivers/net/phy/mdio_bus.c:143 fixed_mdio_bus_init+0x163/0x1000 [fixed_phy] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 3524: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kfree+0xe1/0x270 mm/slub.c:3938 device_release+0x78/0x200 drivers/base/core.c:919 kobject_cleanup lib/kobject.c:662 [inline] kobject_release lib/kobject.c:691 [inline] kref_put include/linux/kref.h:67 [inline] kobject_put+0x146/0x240 lib/kobject.c:708 put_device+0x1c/0x30 drivers/base/core.c:2060 __mdiobus_register+0x483/0x560 drivers/net/phy/mdio_bus.c:382 fixed_mdio_bus_init+0x26b/0x1000 [fixed_phy] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881dc824c80 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 248 bytes inside of 2048-byte region [ffff8881dc824c80, ffff8881dc825480) The buggy address belongs to the page: page:ffffea0007720800 count:1 mapcount:0 mapping:ffff8881f6c02800 index:0x0 compound_mapcount: 0 flags: 0x2fffc0000010200(slab|head) raw: 02fffc0000010200 0000000000000000 0000000500000001 ffff8881f6c02800 raw: 0000000000000000 00000000800f000f 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881dc824c00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8881dc824c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881dc824d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881dc824d80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881dc824e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: 0c692d0 ("drivers/net/phy/mdio_bus.c: call put_device on device_register() failure") Signed-off-by: YueHaibing <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Ben Hutchings <[email protected]>
mdrjr
pushed a commit
that referenced
this pull request
May 17, 2019
commit 58bdd54 upstream. KASAN report this: BUG: KASAN: null-ptr-deref in nfc_llcp_build_gb+0x37f/0x540 [nfc] Read of size 3 at addr 0000000000000000 by task syz-executor.0/5401 CPU: 0 PID: 5401 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 kasan_report+0x171/0x18d mm/kasan/report.c:321 memcpy+0x1f/0x50 mm/kasan/common.c:130 nfc_llcp_build_gb+0x37f/0x540 [nfc] nfc_llcp_register_device+0x6eb/0xb50 [nfc] nfc_register_device+0x50/0x1d0 [nfc] nfcsim_device_new+0x394/0x67d [nfcsim] ? 0xffffffffc1080000 nfcsim_init+0x6b/0x1000 [nfcsim] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f9cb79dcc58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000280 RDI: 0000000000000003 RBP: 00007f9cb79dcc70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f9cb79dd6bc R13: 00000000004bcefb R14: 00000000006f7030 R15: 0000000000000004 nfc_llcp_build_tlv will return NULL on fails, caller should check it, otherwise will trigger a NULL dereference. Reported-by: Hulk Robot <[email protected]> Fixes: eda21f1 ("NFC: Set MIU and RW values from CONNECT and CC LLCP frames") Fixes: d646960 ("NFC: Initial LLCP support") Signed-off-by: YueHaibing <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Ben Hutchings <[email protected]>
mdrjr
pushed a commit
that referenced
this pull request
May 17, 2019
[ Upstream commit 6377f78 ] KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <[email protected]> Signed-off-by: YueHaibing <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
mdrjr
pushed a commit
that referenced
this pull request
Jun 10, 2019
commit b2c01aa upstream. Syzkaller report this: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN PTI CPU: 0 PID: 4492 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:sysfs_remove_file_ns+0x27/0x70 fs/sysfs/file.c:468 Code: 00 00 00 41 54 55 48 89 fd 53 49 89 d4 48 89 f3 e8 ee 76 9c ff 48 8d 7d 30 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 75 2d 48 89 da 48 b8 00 00 00 00 00 fc ff df 48 8b 6d RSP: 0018:ffff8881e9d9fc00 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: ffffffff900367e0 RCX: ffffffff81a95952 RDX: 0000000000000006 RSI: ffffc90001405000 RDI: 0000000000000030 RBP: 0000000000000000 R08: fffffbfff1fa22ed R09: fffffbfff1fa22ed R10: 0000000000000001 R11: fffffbfff1fa22ec R12: 0000000000000000 R13: ffffffffc1abdac0 R14: 1ffff1103d3b3f8b R15: 0000000000000000 FS: 00007fe409dc1700(0000) GS:ffff8881f1200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2d721000 CR3: 00000001e98b6005 CR4: 00000000007606f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: sysfs_remove_file include/linux/sysfs.h:519 [inline] driver_remove_file+0x40/0x50 drivers/base/driver.c:122 pcmcia_remove_newid_file drivers/pcmcia/ds.c:163 [inline] pcmcia_unregister_driver+0x7d/0x2b0 drivers/pcmcia/ds.c:209 ssb_modexit+0xa/0x1b [ssb] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fe409dc0c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200000c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe409dc16bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Modules linked in: ssb(-) 3c59x nvme_core macvlan tap pata_hpt3x3 rt2x00pci null_blk tsc40 pm_notifier_error_inject notifier_error_inject mdio cdc_wdm nf_reject_ipv4 ath9k_common ath9k_hw ath pppox ppp_generic slhc ehci_platform wl12xx wlcore tps6507x_ts ioc4 nf_synproxy_core ide_gd_mod ax25 can_dev iwlwifi can_raw atm tm2_touchkey can_gw can sundance adp5588_keys rt2800mmio rt2800lib rt2x00mmio rt2x00lib eeprom_93cx6 pn533 lru_cache elants_i2c ip_set nfnetlink gameport tipc hampshire nhc_ipv6 nhc_hop nhc_udp nhc_fragment nhc_routing nhc_mobility nhc_dest 6lowpan silead brcmutil nfc mt76_usb mt76 mac80211 iptable_security iptable_raw iptable_mangle iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_gre sit hsr veth vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon vcan bridge stp llc ip6_gre ip6_tunnel tunnel6 tun joydev mousedev serio_raw ide_pci_generic piix floppy ide_core sch_fq_codel ip_tables x_tables ipv6 [last unloaded: 3c59x] Dumping ftrace buffer: (ftrace buffer empty) ---[ end trace 3913cbf8011e1c05 ]--- In ssb_modinit, it does not fail SSB init when ssb_host_pcmcia_init failed, however in ssb_modexit, ssb_host_pcmcia_exit calls pcmcia_unregister_driver unconditionally, which may tigger a NULL pointer dereference issue as above. Reported-by: Hulk Robot <[email protected]> Fixes: 399500d ("ssb: pick PCMCIA host code support from b43 driver") Signed-off-by: YueHaibing <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
mdrjr
pushed a commit
that referenced
this pull request
Jun 18, 2019
commit b2c01aa upstream. Syzkaller report this: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN PTI CPU: 0 PID: 4492 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:sysfs_remove_file_ns+0x27/0x70 fs/sysfs/file.c:468 Code: 00 00 00 41 54 55 48 89 fd 53 49 89 d4 48 89 f3 e8 ee 76 9c ff 48 8d 7d 30 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 75 2d 48 89 da 48 b8 00 00 00 00 00 fc ff df 48 8b 6d RSP: 0018:ffff8881e9d9fc00 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: ffffffff900367e0 RCX: ffffffff81a95952 RDX: 0000000000000006 RSI: ffffc90001405000 RDI: 0000000000000030 RBP: 0000000000000000 R08: fffffbfff1fa22ed R09: fffffbfff1fa22ed R10: 0000000000000001 R11: fffffbfff1fa22ec R12: 0000000000000000 R13: ffffffffc1abdac0 R14: 1ffff1103d3b3f8b R15: 0000000000000000 FS: 00007fe409dc1700(0000) GS:ffff8881f1200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2d721000 CR3: 00000001e98b6005 CR4: 00000000007606f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: sysfs_remove_file include/linux/sysfs.h:519 [inline] driver_remove_file+0x40/0x50 drivers/base/driver.c:122 pcmcia_remove_newid_file drivers/pcmcia/ds.c:163 [inline] pcmcia_unregister_driver+0x7d/0x2b0 drivers/pcmcia/ds.c:209 ssb_modexit+0xa/0x1b [ssb] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fe409dc0c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200000c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe409dc16bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Modules linked in: ssb(-) 3c59x nvme_core macvlan tap pata_hpt3x3 rt2x00pci null_blk tsc40 pm_notifier_error_inject notifier_error_inject mdio cdc_wdm nf_reject_ipv4 ath9k_common ath9k_hw ath pppox ppp_generic slhc ehci_platform wl12xx wlcore tps6507x_ts ioc4 nf_synproxy_core ide_gd_mod ax25 can_dev iwlwifi can_raw atm tm2_touchkey can_gw can sundance adp5588_keys rt2800mmio rt2800lib rt2x00mmio rt2x00lib eeprom_93cx6 pn533 lru_cache elants_i2c ip_set nfnetlink gameport tipc hampshire nhc_ipv6 nhc_hop nhc_udp nhc_fragment nhc_routing nhc_mobility nhc_dest 6lowpan silead brcmutil nfc mt76_usb mt76 mac80211 iptable_security iptable_raw iptable_mangle iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_gre sit hsr veth vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon vcan bridge stp llc ip6_gre ip6_tunnel tunnel6 tun joydev mousedev serio_raw ide_pci_generic piix floppy ide_core sch_fq_codel ip_tables x_tables ipv6 [last unloaded: 3c59x] Dumping ftrace buffer: (ftrace buffer empty) ---[ end trace 3913cbf8011e1c05 ]--- In ssb_modinit, it does not fail SSB init when ssb_host_pcmcia_init failed, however in ssb_modexit, ssb_host_pcmcia_exit calls pcmcia_unregister_driver unconditionally, which may tigger a NULL pointer dereference issue as above. Reported-by: Hulk Robot <[email protected]> Fixes: 399500d ("ssb: pick PCMCIA host code support from b43 driver") Signed-off-by: YueHaibing <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
mdrjr
pushed a commit
that referenced
this pull request
Jun 18, 2019
commit ea84b58 upstream. Instead of running with interrupts disabled, use a semaphore. This should make it easier for backends that may need to sleep (e.g. EFI) when performing a write: |BUG: sleeping function called from invalid context at kernel/sched/completion.c:99 |in_atomic(): 1, irqs_disabled(): 1, pid: 2236, name: sig-xstate-bum |Preemption disabled at: |[<ffffffff99d60512>] pstore_dump+0x72/0x330 |CPU: 26 PID: 2236 Comm: sig-xstate-bum Tainted: G D 4.20.0-rc3 #45 |Call Trace: | dump_stack+0x4f/0x6a | ___might_sleep.cold.91+0xd3/0xe4 | __might_sleep+0x50/0x90 | wait_for_completion+0x32/0x130 | virt_efi_query_variable_info+0x14e/0x160 | efi_query_variable_store+0x51/0x1a0 | efivar_entry_set_safe+0xa3/0x1b0 | efi_pstore_write+0x109/0x140 | pstore_dump+0x11c/0x330 | kmsg_dump+0xa4/0xd0 | oops_exit+0x22/0x30 ... Reported-by: Sebastian Andrzej Siewior <[email protected]> Fixes: 21b3ddd ("efi: Don't use spinlocks for efi vars") Signed-off-by: Kees Cook <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
mdrjr
pushed a commit
that referenced
this pull request
Jul 16, 2019
[ Upstream commit c09581a ] KASAN reports this: BUG: KASAN: global-out-of-bounds in qedi_dbg_err+0xda/0x330 [qedi] Read of size 31 at addr ffffffffc12b0ae0 by task syz-executor.0/2429 CPU: 0 PID: 2429 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x1c4/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 memcpy+0x1f/0x50 mm/kasan/common.c:130 qedi_dbg_err+0xda/0x330 [qedi] ? 0xffffffffc12d0000 qedi_init+0x118/0x1000 [qedi] ? 0xffffffffc12d0000 ? 0xffffffffc12d0000 ? 0xffffffffc12d0000 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f2d57e55c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bfa0 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 00000000200003c0 RDI: 0000000000000003 RBP: 00007f2d57e55c70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f2d57e566bc R13: 00000000004bcefb R14: 00000000006f7030 R15: 0000000000000004 The buggy address belongs to the variable: __func__.67584+0x0/0xffffffffffffd520 [qedi] Memory state around the buggy address: ffffffffc12b0980: fa fa fa fa 00 04 fa fa fa fa fa fa 00 00 05 fa ffffffffc12b0a00: fa fa fa fa 00 00 04 fa fa fa fa fa 00 05 fa fa > ffffffffc12b0a80: fa fa fa fa 00 06 fa fa fa fa fa fa 00 02 fa fa ^ ffffffffc12b0b00: fa fa fa fa 00 00 04 fa fa fa fa fa 00 00 03 fa ffffffffc12b0b80: fa fa fa fa 00 00 02 fa fa fa fa fa 00 00 04 fa Currently the qedi_dbg_* family of functions can overrun the end of the source string if it is less than the destination buffer length because of the use of a fixed sized memcpy. Remove the memset/memcpy calls to nfunc and just use func instead as it is always a null terminated string. Reported-by: Hulk Robot <[email protected]> Fixes: ace7f46 ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.") Signed-off-by: YueHaibing <[email protected]> Reviewed-by: Dan Carpenter <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
mdrjr
pushed a commit
that referenced
this pull request
Oct 19, 2019
commit 6377f78 upstream. KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <[email protected]> Signed-off-by: YueHaibing <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Ben Hutchings <[email protected]>
ardje
pushed a commit
to ardje/linux
that referenced
this pull request
May 8, 2020
[ Upstream commit 27de77c ] syzbot wrote: | ============================= | WARNING: suspicious RCU usage | 5.7.0-rc1+ hardkernel#45 Not tainted | ----------------------------- | net/openvswitch/conntrack.c:1898 RCU-list traversed in non-reader section!! | | other info that might help us debug this: | rcu_scheduler_active = 2, debug_locks = 1 | ... | | stack backtrace: | Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014 | Workqueue: netns cleanup_net | Call Trace: | ... | ovs_ct_exit | ovs_exit_net | ops_exit_list.isra.7 | cleanup_net | process_one_work | worker_thread To avoid that warning, invoke the ovs_ct_exit under ovs_lock and add lockdep_ovsl_is_held as optional lockdep expression. Link: https://lore.kernel.org/lkml/[email protected] Fixes: 11efd5c ("openvswitch: Support conntrack zone limit") Cc: Pravin B Shelar <[email protected]> Cc: Yi-Hung Wei <[email protected]> Reported-by: [email protected] Signed-off-by: Tonghao Zhang <[email protected]> Acked-by: Pravin B Shelar <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
mdrjr
pushed a commit
that referenced
this pull request
Feb 16, 2021
[ Upstream commit 347fb0c ] While mounting a crafted image provided by user, kernel panics due to the invalid chunk item whose end is less than start. [66.387422] loop: module loaded [66.389773] loop0: detected capacity change from 262144 to 0 [66.427708] BTRFS: device fsid a62e00e8-e94e-4200-8217-12444de93c2e devid 1 transid 12 /dev/loop0 scanned by mount (613) [66.431061] BTRFS info (device loop0): disk space caching is enabled [66.431078] BTRFS info (device loop0): has skinny extents [66.437101] BTRFS error: insert state: end < start 29360127 37748736 [66.437136] ------------[ cut here ]------------ [66.437140] WARNING: CPU: 16 PID: 613 at fs/btrfs/extent_io.c:557 insert_state.cold+0x1a/0x46 [btrfs] [66.437369] CPU: 16 PID: 613 Comm: mount Tainted: G O 5.11.0-rc1-custom #45 [66.437374] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ArchLinux 1.14.0-1 04/01/2014 [66.437378] RIP: 0010:insert_state.cold+0x1a/0x46 [btrfs] [66.437420] RSP: 0018:ffff93e5414c3908 EFLAGS: 00010286 [66.437427] RAX: 0000000000000000 RBX: 0000000001bfffff RCX: 0000000000000000 [66.437431] RDX: 0000000000000000 RSI: ffffffffb90d4660 RDI: 00000000ffffffff [66.437434] RBP: ffff93e5414c3938 R08: 0000000000000001 R09: 0000000000000001 [66.437438] R10: ffff93e5414c3658 R11: 0000000000000000 R12: ffff8ec782d72aa0 [66.437441] R13: ffff8ec78bc71628 R14: 0000000000000000 R15: 0000000002400000 [66.437447] FS: 00007f01386a8580(0000) GS:ffff8ec809000000(0000) knlGS:0000000000000000 [66.437451] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [66.437455] CR2: 00007f01382fa000 CR3: 0000000109a34000 CR4: 0000000000750ee0 [66.437460] PKRU: 55555554 [66.437464] Call Trace: [66.437475] set_extent_bit+0x652/0x740 [btrfs] [66.437539] set_extent_bits_nowait+0x1d/0x20 [btrfs] [66.437576] add_extent_mapping+0x1e0/0x2f0 [btrfs] [66.437621] read_one_chunk+0x33c/0x420 [btrfs] [66.437674] btrfs_read_chunk_tree+0x6a4/0x870 [btrfs] [66.437708] ? kvm_sched_clock_read+0x18/0x40 [66.437739] open_ctree+0xb32/0x1734 [btrfs] [66.437781] ? bdi_register_va+0x1b/0x20 [66.437788] ? super_setup_bdi_name+0x79/0xd0 [66.437810] btrfs_mount_root.cold+0x12/0xeb [btrfs] [66.437854] ? __kmalloc_track_caller+0x217/0x3b0 [66.437873] legacy_get_tree+0x34/0x60 [66.437880] vfs_get_tree+0x2d/0xc0 [66.437888] vfs_kern_mount.part.0+0x78/0xc0 [66.437897] vfs_kern_mount+0x13/0x20 [66.437902] btrfs_mount+0x11f/0x3c0 [btrfs] [66.437940] ? kfree+0x5ff/0x670 [66.437944] ? __kmalloc_track_caller+0x217/0x3b0 [66.437962] legacy_get_tree+0x34/0x60 [66.437974] vfs_get_tree+0x2d/0xc0 [66.437983] path_mount+0x48c/0xd30 [66.437998] __x64_sys_mount+0x108/0x140 [66.438011] do_syscall_64+0x38/0x50 [66.438018] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [66.438023] RIP: 0033:0x7f0138827f6e [66.438033] RSP: 002b:00007ffecd79edf8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5 [66.438040] RAX: ffffffffffffffda RBX: 00007f013894c264 RCX: 00007f0138827f6e [66.438044] RDX: 00005593a4a41360 RSI: 00005593a4a33690 RDI: 00005593a4a3a6c0 [66.438047] RBP: 00005593a4a33440 R08: 0000000000000000 R09: 0000000000000001 [66.438050] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [66.438054] R13: 00005593a4a3a6c0 R14: 00005593a4a41360 R15: 00005593a4a33440 [66.438078] irq event stamp: 18169 [66.438082] hardirqs last enabled at (18175): [<ffffffffb81154bf>] console_unlock+0x4ff/0x5f0 [66.438088] hardirqs last disabled at (18180): [<ffffffffb8115427>] console_unlock+0x467/0x5f0 [66.438092] softirqs last enabled at (16910): [<ffffffffb8a00fe2>] asm_call_irq_on_stack+0x12/0x20 [66.438097] softirqs last disabled at (16905): [<ffffffffb8a00fe2>] asm_call_irq_on_stack+0x12/0x20 [66.438103] ---[ end trace e114b111db64298b ]--- [66.438107] BTRFS error: found node 12582912 29360127 on insert of 37748736 29360127 [66.438127] BTRFS critical: panic in extent_io_tree_panic:679: locking error: extent tree was modified by another thread while locked (errno=-17 Object already exists) [66.441069] ------------[ cut here ]------------ [66.441072] kernel BUG at fs/btrfs/extent_io.c:679! [66.442064] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [66.443018] CPU: 16 PID: 613 Comm: mount Tainted: G W O 5.11.0-rc1-custom #45 [66.444538] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ArchLinux 1.14.0-1 04/01/2014 [66.446223] RIP: 0010:extent_io_tree_panic.isra.0+0x23/0x25 [btrfs] [66.450878] RSP: 0018:ffff93e5414c3948 EFLAGS: 00010246 [66.451840] RAX: 0000000000000000 RBX: 0000000001bfffff RCX: 0000000000000000 [66.453141] RDX: 0000000000000000 RSI: ffffffffb90d4660 RDI: 00000000ffffffff [66.454445] RBP: ffff93e5414c3948 R08: 0000000000000001 R09: 0000000000000001 [66.455743] R10: ffff93e5414c3658 R11: 0000000000000000 R12: ffff8ec782d728c0 [66.457055] R13: ffff8ec78bc71628 R14: ffff8ec782d72aa0 R15: 0000000002400000 [66.458356] FS: 00007f01386a8580(0000) GS:ffff8ec809000000(0000) knlGS:0000000000000000 [66.459841] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [66.460895] CR2: 00007f01382fa000 CR3: 0000000109a34000 CR4: 0000000000750ee0 [66.462196] PKRU: 55555554 [66.462692] Call Trace: [66.463139] set_extent_bit.cold+0x30/0x98 [btrfs] [66.464049] set_extent_bits_nowait+0x1d/0x20 [btrfs] [66.490466] add_extent_mapping+0x1e0/0x2f0 [btrfs] [66.514097] read_one_chunk+0x33c/0x420 [btrfs] [66.534976] btrfs_read_chunk_tree+0x6a4/0x870 [btrfs] [66.555718] ? kvm_sched_clock_read+0x18/0x40 [66.575758] open_ctree+0xb32/0x1734 [btrfs] [66.595272] ? bdi_register_va+0x1b/0x20 [66.614638] ? super_setup_bdi_name+0x79/0xd0 [66.633809] btrfs_mount_root.cold+0x12/0xeb [btrfs] [66.652938] ? __kmalloc_track_caller+0x217/0x3b0 [66.671925] legacy_get_tree+0x34/0x60 [66.690300] vfs_get_tree+0x2d/0xc0 [66.708221] vfs_kern_mount.part.0+0x78/0xc0 [66.725808] vfs_kern_mount+0x13/0x20 [66.742730] btrfs_mount+0x11f/0x3c0 [btrfs] [66.759350] ? kfree+0x5ff/0x670 [66.775441] ? __kmalloc_track_caller+0x217/0x3b0 [66.791750] legacy_get_tree+0x34/0x60 [66.807494] vfs_get_tree+0x2d/0xc0 [66.823349] path_mount+0x48c/0xd30 [66.838753] __x64_sys_mount+0x108/0x140 [66.854412] do_syscall_64+0x38/0x50 [66.869673] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [66.885093] RIP: 0033:0x7f0138827f6e [66.945613] RSP: 002b:00007ffecd79edf8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5 [66.977214] RAX: ffffffffffffffda RBX: 00007f013894c264 RCX: 00007f0138827f6e [66.994266] RDX: 00005593a4a41360 RSI: 00005593a4a33690 RDI: 00005593a4a3a6c0 [67.011544] RBP: 00005593a4a33440 R08: 0000000000000000 R09: 0000000000000001 [67.028836] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [67.045812] R13: 00005593a4a3a6c0 R14: 00005593a4a41360 R15: 00005593a4a33440 [67.216138] ---[ end trace e114b111db64298c ]--- [67.237089] RIP: 0010:extent_io_tree_panic.isra.0+0x23/0x25 [btrfs] [67.325317] RSP: 0018:ffff93e5414c3948 EFLAGS: 00010246 [67.347946] RAX: 0000000000000000 RBX: 0000000001bfffff RCX: 0000000000000000 [67.371343] RDX: 0000000000000000 RSI: ffffffffb90d4660 RDI: 00000000ffffffff [67.394757] RBP: ffff93e5414c3948 R08: 0000000000000001 R09: 0000000000000001 [67.418409] R10: ffff93e5414c3658 R11: 0000000000000000 R12: ffff8ec782d728c0 [67.441906] R13: ffff8ec78bc71628 R14: ffff8ec782d72aa0 R15: 0000000002400000 [67.465436] FS: 00007f01386a8580(0000) GS:ffff8ec809000000(0000) knlGS:0000000000000000 [67.511660] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [67.535047] CR2: 00007f01382fa000 CR3: 0000000109a34000 CR4: 0000000000750ee0 [67.558449] PKRU: 55555554 [67.581146] note: mount[613] exited with preempt_count 2 The image has a chunk item which has a logical start 37748736 and length 18446744073701163008 (-8M). The calculated end 29360127 overflows. EEXIST was caught by insert_state() because of the duplicate end and extent_io_tree_panic() was called. Add overflow check of chunk item end to tree checker so it can be detected early at mount time. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=208929 CC: [email protected] # 4.19+ Reviewed-by: Anand Jain <[email protected]> Signed-off-by: Su Yue <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Dangku
pushed a commit
to Dangku/amlogic-linux
that referenced
this pull request
Apr 11, 2022
Khadas vims 4.9.y
mdrjr
pushed a commit
that referenced
this pull request
Oct 16, 2023
[ Upstream commit d527f51 ] There is a UAF when xfstests on cifs: BUG: KASAN: use-after-free in smb2_is_network_name_deleted+0x27/0x160 Read of size 4 at addr ffff88810103fc08 by task cifsd/923 CPU: 1 PID: 923 Comm: cifsd Not tainted 6.1.0-rc4+ #45 ... Call Trace: <TASK> dump_stack_lvl+0x34/0x44 print_report+0x171/0x472 kasan_report+0xad/0x130 kasan_check_range+0x145/0x1a0 smb2_is_network_name_deleted+0x27/0x160 cifs_demultiplex_thread.cold+0x172/0x5a4 kthread+0x165/0x1a0 ret_from_fork+0x1f/0x30 </TASK> Allocated by task 923: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 __kasan_slab_alloc+0x54/0x60 kmem_cache_alloc+0x147/0x320 mempool_alloc+0xe1/0x260 cifs_small_buf_get+0x24/0x60 allocate_buffers+0xa1/0x1c0 cifs_demultiplex_thread+0x199/0x10d0 kthread+0x165/0x1a0 ret_from_fork+0x1f/0x30 Freed by task 921: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_save_free_info+0x2a/0x40 ____kasan_slab_free+0x143/0x1b0 kmem_cache_free+0xe3/0x4d0 cifs_small_buf_release+0x29/0x90 SMB2_negotiate+0x8b7/0x1c60 smb2_negotiate+0x51/0x70 cifs_negotiate_protocol+0xf0/0x160 cifs_get_smb_ses+0x5fa/0x13c0 mount_get_conns+0x7a/0x750 cifs_mount+0x103/0xd00 cifs_smb3_do_mount+0x1dd/0xcb0 smb3_get_tree+0x1d5/0x300 vfs_get_tree+0x41/0xf0 path_mount+0x9b3/0xdd0 __x64_sys_mount+0x190/0x1d0 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 The UAF is because: mount(pid: 921) | cifsd(pid: 923) -------------------------------|------------------------------- | cifs_demultiplex_thread SMB2_negotiate | cifs_send_recv | compound_send_recv | smb_send_rqst | wait_for_response | wait_event_state [1] | | standard_receive3 | cifs_handle_standard | handle_mid | mid->resp_buf = buf; [2] | dequeue_mid [3] KILL the process [4] | resp_iov[i].iov_base = buf | free_rsp_buf [5] | | is_network_name_deleted [6] | callback 1. After send request to server, wait the response until mid->mid_state != SUBMITTED; 2. Receive response from server, and set it to mid; 3. Set the mid state to RECEIVED; 4. Kill the process, the mid state already RECEIVED, get 0; 5. Handle and release the negotiate response; 6. UAF. It can be easily reproduce with add some delay in [3] - [6]. Only sync call has the problem since async call's callback is executed in cifsd process. Add an extra state to mark the mid state to READY before wakeup the waitter, then it can get the resp safely. Fixes: ec637e3 ("[CIFS] Avoid extra large buffer allocation (and memcpy) in cifs_readpages") Reviewed-by: Paulo Alcantara (SUSE) <[email protected]> Signed-off-by: Zhang Xiaoxu <[email protected]> Signed-off-by: Steve French <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
mdrjr
pushed a commit
that referenced
this pull request
Nov 7, 2023
commit 503930f upstream. rtnl_offload_xstats_get_size_hw_s_info_one() conditionalizes the size-computation for IFLA_OFFLOAD_XSTATS_HW_S_INFO_USED based on whether or not the device has offload_xstats enabled. However, rtnl_offload_xstats_fill_hw_s_info_one() is adding the u8 for that field uncondtionally. syzkaller triggered a WARNING in rtnl_stats_get due to this: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 754 at net/core/rtnetlink.c:5982 rtnl_stats_get+0x2f4/0x300 Modules linked in: CPU: 0 PID: 754 Comm: syz-executor148 Not tainted 6.6.0-rc2-g331b78eb12af #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 RIP: 0010:rtnl_stats_get+0x2f4/0x300 net/core/rtnetlink.c:5982 Code: ff ff 89 ee e8 7d 72 50 ff 83 fd a6 74 17 e8 33 6e 50 ff 4c 89 ef be 02 00 00 00 e8 86 00 fa ff e9 7b fe ff ff e8 1c 6e 50 ff <0f> 0b eb e5 e8 73 79 7b 00 0f 1f 00 90 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffc900006837c0 EFLAGS: 00010293 RAX: ffffffff81cf7f24 RBX: ffff8881015d9000 RCX: ffff888101815a00 RDX: 0000000000000000 RSI: 00000000ffffffa6 RDI: 00000000ffffffa6 RBP: 00000000ffffffa6 R08: ffffffff81cf7f03 R09: 0000000000000001 R10: ffff888101ba47b9 R11: ffff888101815a00 R12: ffff8881017dae00 R13: ffff8881017dad00 R14: ffffc90000683ab8 R15: ffffffff83c1f740 FS: 00007fbc22dbc740(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000046 CR3: 000000010264e003 CR4: 0000000000170ef0 Call Trace: <TASK> rtnetlink_rcv_msg+0x677/0x710 net/core/rtnetlink.c:6480 netlink_rcv_skb+0xea/0x1c0 net/netlink/af_netlink.c:2545 netlink_unicast+0x430/0x500 net/netlink/af_netlink.c:1342 netlink_sendmsg+0x4fc/0x620 net/netlink/af_netlink.c:1910 sock_sendmsg+0xa8/0xd0 net/socket.c:730 ____sys_sendmsg+0x22a/0x320 net/socket.c:2541 ___sys_sendmsg+0x143/0x190 net/socket.c:2595 __x64_sys_sendmsg+0xd8/0x150 net/socket.c:2624 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x47/0xa0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 RIP: 0033:0x7fbc22e8d6a9 Code: 5c c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 4f 37 0d 00 f7 d8 64 89 01 48 RSP: 002b:00007ffc4320e778 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000004007d0 RCX: 00007fbc22e8d6a9 RDX: 0000000000000000 RSI: 0000000020000000 RDI: 0000000000000003 RBP: 0000000000000001 R08: 0000000000000000 R09: 00000000004007d0 R10: 0000000000000008 R11: 0000000000000246 R12: 00007ffc4320e898 R13: 00007ffc4320e8a8 R14: 00000000004004a0 R15: 00007fbc22fa5a80 </TASK> ---[ end trace 0000000000000000 ]--- Which didn't happen prior to commit bf9f1ba ("net: add dedicated kmem_cache for typical/small skb->head") as the skb always was large enough. Fixes: 0e7788f ("net: rtnetlink: Add UAPI for obtaining L3 offload xstats") Signed-off-by: Christoph Paasch <[email protected]> Reviewed-by: Petr Machata <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
mdrjr
pushed a commit
that referenced
this pull request
Dec 11, 2023
commit 9fce92f upstream. After the blamed commit below, the TCP sockets (and the MPTCP subflows) can build egress packets larger than 64K. That exceeds the maximum DSS data size, the length being misrepresent on the wire and the stream being corrupted, as later observed on the receiver: WARNING: CPU: 0 PID: 9696 at net/mptcp/protocol.c:705 __mptcp_move_skbs_from_subflow+0x2604/0x26e0 CPU: 0 PID: 9696 Comm: syz-executor.7 Not tainted 6.6.0-rc5-gcd8bdf563d46 #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 netlink: 8 bytes leftover after parsing attributes in process `syz-executor.4'. RIP: 0010:__mptcp_move_skbs_from_subflow+0x2604/0x26e0 net/mptcp/protocol.c:705 RSP: 0018:ffffc90000006e80 EFLAGS: 00010246 RAX: ffffffff83e9f674 RBX: ffff88802f45d870 RCX: ffff888102ad0000 netlink: 8 bytes leftover after parsing attributes in process `syz-executor.4'. RDX: 0000000080000303 RSI: 0000000000013908 RDI: 0000000000003908 RBP: ffffc90000007110 R08: ffffffff83e9e078 R09: 1ffff1100e548c8a R10: dffffc0000000000 R11: ffffed100e548c8b R12: 0000000000013908 R13: dffffc0000000000 R14: 0000000000003908 R15: 000000000031cf29 FS: 00007f239c47e700(0000) GS:ffff88811b200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f239c45cd78 CR3: 000000006a66c006 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600 PKRU: 55555554 Call Trace: <IRQ> mptcp_data_ready+0x263/0xac0 net/mptcp/protocol.c:819 subflow_data_ready+0x268/0x6d0 net/mptcp/subflow.c:1409 tcp_data_queue+0x21a1/0x7a60 net/ipv4/tcp_input.c:5151 tcp_rcv_established+0x950/0x1d90 net/ipv4/tcp_input.c:6098 tcp_v6_do_rcv+0x554/0x12f0 net/ipv6/tcp_ipv6.c:1483 tcp_v6_rcv+0x2e26/0x3810 net/ipv6/tcp_ipv6.c:1749 ip6_protocol_deliver_rcu+0xd6b/0x1ae0 net/ipv6/ip6_input.c:438 ip6_input+0x1c5/0x470 net/ipv6/ip6_input.c:483 ipv6_rcv+0xef/0x2c0 include/linux/netfilter.h:304 __netif_receive_skb+0x1ea/0x6a0 net/core/dev.c:5532 process_backlog+0x353/0x660 net/core/dev.c:5974 __napi_poll+0xc6/0x5a0 net/core/dev.c:6536 net_rx_action+0x6a0/0xfd0 net/core/dev.c:6603 __do_softirq+0x184/0x524 kernel/softirq.c:553 do_softirq+0xdd/0x130 kernel/softirq.c:454 Address the issue explicitly bounding the maximum GSO size to what MPTCP actually allows. Reported-by: Christoph Paasch <[email protected]> Closes: multipath-tcp/mptcp_net-next#450 Fixes: 7c4e983 ("net: allow gso_max_size to exceed 65536") Cc: [email protected] Signed-off-by: Paolo Abeni <[email protected]> Reviewed-by: Mat Martineau <[email protected]> Signed-off-by: Matthieu Baerts <[email protected]> Link: https://lore.kernel.org/r/20231114-upstream-net-20231113-mptcp-misc-fixes-6-7-rc2-v1-1-7b9cd6a7b7f4@kernel.org Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
mdrjr
pushed a commit
that referenced
this pull request
Nov 4, 2024
commit 829e0c9 upstream. There is another found exception that the "timerlat/1" thread was scheduled on CPU0, and lead to timer corruption finally: ``` ODEBUG: init active (active state 0) object: ffff888237c2e108 object type: hrtimer hint: timerlat_irq+0x0/0x220 WARNING: CPU: 0 PID: 426 at lib/debugobjects.c:518 debug_print_object+0x7d/0xb0 Modules linked in: CPU: 0 UID: 0 PID: 426 Comm: timerlat/1 Not tainted 6.11.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:debug_print_object+0x7d/0xb0 ... Call Trace: <TASK> ? __warn+0x7c/0x110 ? debug_print_object+0x7d/0xb0 ? report_bug+0xf1/0x1d0 ? prb_read_valid+0x17/0x20 ? handle_bug+0x3f/0x70 ? exc_invalid_op+0x13/0x60 ? asm_exc_invalid_op+0x16/0x20 ? debug_print_object+0x7d/0xb0 ? debug_print_object+0x7d/0xb0 ? __pfx_timerlat_irq+0x10/0x10 __debug_object_init+0x110/0x150 hrtimer_init+0x1d/0x60 timerlat_main+0xab/0x2d0 ? __pfx_timerlat_main+0x10/0x10 kthread+0xb7/0xe0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2d/0x40 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> ``` After tracing the scheduling event, it was discovered that the migration of the "timerlat/1" thread was performed during thread creation. Further analysis confirmed that it is because the CPU online processing for osnoise is implemented through workers, which is asynchronous with the offline processing. When the worker was scheduled to create a thread, the CPU may has already been removed from the cpu_online_mask during the offline process, resulting in the inability to select the right CPU: T1 | T2 [CPUHP_ONLINE] | cpu_device_down() osnoise_hotplug_workfn() | | cpus_write_lock() | takedown_cpu(1) | cpus_write_unlock() [CPUHP_OFFLINE] | cpus_read_lock() | start_kthread(1) | cpus_read_unlock() | To fix this, skip online processing if the CPU is already offline. Cc: [email protected] Cc: Masami Hiramatsu <[email protected]> Cc: Mathieu Desnoyers <[email protected]> Link: https://lore.kernel.org/[email protected] Fixes: c8895e2 ("trace/osnoise: Support hotplug operations") Signed-off-by: Wei Li <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Hello,
This is a preliminary support for CSI camera, dont merge it before testing, pull request is created only to gather debugging info.
Recently I've been busy trying to bring this up, after having conversation with FIMC driver authors I've finally figured everything out and this should work, however, doing experiments, I killed my s5k4ecgx camera and I can't test these last changes that were suggested by them.
I hope somebody with this camera could try running this and post dmesg logs.
To get this working you need:
This means that FIMC and CSI insterface brought up, but camera did not answer (NAK) on I2C bus. If you'll have a working camera (that I lack right now), you will, hopefully, have a table showing FIMC<->CSI routing.
Next after getting FIMC linked to CSI is getting FIMC-IS working, it is already sort-of working in 3.14, but lacks the firmware, which, I believe, can be copied from android BSPs. With that we will be able to run simple ioctls to FIMC-IS and have it detect faces/etc.video functions.
Best Regards,
Dmitriy Beykun