Update MAINTAINERS #48
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Signed-off-by: Miguel Ojeda <[email protected]>
|
Merging myself since it is trivial. |
ojeda
pushed a commit
that referenced
this pull request
Jun 29, 2021
nft_set_elem_expr_alloc() needs an initialized set if expression sets on the NFT_EXPR_GC flag. Move set fields initialization before expression setup. [4512935.019450] ================================================================== [4512935.019456] BUG: KASAN: null-ptr-deref in nft_set_elem_expr_alloc+0x84/0xd0 [nf_tables] [4512935.019487] Read of size 8 at addr 0000000000000070 by task nft/23532 [4512935.019494] CPU: 1 PID: 23532 Comm: nft Not tainted 5.12.0-rc4+ #48 [...] [4512935.019502] Call Trace: [4512935.019505] dump_stack+0x89/0xb4 [4512935.019512] ? nft_set_elem_expr_alloc+0x84/0xd0 [nf_tables] [4512935.019536] ? nft_set_elem_expr_alloc+0x84/0xd0 [nf_tables] [4512935.019560] kasan_report.cold.12+0x5f/0xd8 [4512935.019566] ? nft_set_elem_expr_alloc+0x84/0xd0 [nf_tables] [4512935.019590] nft_set_elem_expr_alloc+0x84/0xd0 [nf_tables] [4512935.019615] nf_tables_newset+0xc7f/0x1460 [nf_tables] Reported-by: [email protected] Fixes: 6503842 ("netfilter: nf_tables: allow to specify stateful expression in set definition") Signed-off-by: Pablo Neira Ayuso <[email protected]>
ojeda
pushed a commit
that referenced
this pull request
Feb 6, 2022
syzbot detected a case where the page table counters were not properly updated. syzkaller login: ------------[ cut here ]------------ kernel BUG at mm/page_table_check.c:162! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 3099 Comm: pasha Not tainted 5.16.0+ #48 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIO4 RIP: 0010:__page_table_check_zero+0x159/0x1a0 Call Trace: free_pcp_prepare+0x3be/0xaa0 free_unref_page+0x1c/0x650 free_compound_page+0xec/0x130 free_transhuge_page+0x1be/0x260 __put_compound_page+0x90/0xd0 release_pages+0x54c/0x1060 __pagevec_release+0x7c/0x110 shmem_undo_range+0x85e/0x1250 ... The repro involved having a huge page that is split due to uprobe event temporarily replacing one of the pages in the huge page. Later the huge page was combined again, but the counters were off, as the PTE level was not properly updated. Make sure that when PMD is cleared and prior to freeing the level the PTEs are updated. Link: https://lkml.kernel.org/r/[email protected] Fixes: df4e817 ("mm: page table check") Signed-off-by: Pasha Tatashin <[email protected]> Acked-by: David Rientjes <[email protected]> Cc: Aneesh Kumar K.V <[email protected]> Cc: Anshuman Khandual <[email protected]> Cc: Dave Hansen <[email protected]> Cc: Greg Thelen <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Hugh Dickins <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Slaby <[email protected]> Cc: Mike Rapoport <[email protected]> Cc: Muchun Song <[email protected]> Cc: Paul Turner <[email protected]> Cc: Wei Xu <[email protected]> Cc: Will Deacon <[email protected]> Cc: Zi Yan <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
psomas
pushed a commit
to psomas/linux-rs
that referenced
this pull request
Dec 30, 2022
We use uprobe in aarch64_be, which we found the tracee task would exit due to SIGILL when we enable the uprobe trace. We can see the replace inst from uprobe is not correct in aarch big-endian. As in Armv8-A, instruction fetches are always treated as little-endian, we should treat the UPROBE_SWBP_INSN as little-endian。 The test case is as following。 bash-4.4# ./mqueue_test_aarchbe 1 1 2 1 10 > /dev/null & bash-4.4# cd /sys/kernel/debug/tracing/ bash-4.4# echo 'p:test /mqueue_test_aarchbe:0xc30 %x0 %x1' > uprobe_events bash-4.4# echo 1 > events/uprobes/enable bash-4.4# bash-4.4# ps PID TTY TIME CMD 140 ? 00:00:01 bash 237 ? 00:00:00 ps [1]+ Illegal instruction ./mqueue_test_aarchbe 1 1 2 1 100 > /dev/null which we debug use gdb as following: bash-4.4# gdb attach 155 (gdb) disassemble send Dump of assembler code for function send: 0x0000000000400c30 <+0>: .inst 0xa00020d4 ; undefined 0x0000000000400c34 <+4>: mov x29, sp 0x0000000000400c38 <+8>: str w0, [sp, Rust-for-Linux#28] 0x0000000000400c3c <+12>: strb w1, [sp, Rust-for-Linux#27] 0x0000000000400c40 <+16>: str xzr, [sp, Rust-for-Linux#40] 0x0000000000400c44 <+20>: str xzr, [sp, Rust-for-Linux#48] 0x0000000000400c48 <+24>: add x0, sp, #0x1b 0x0000000000400c4c <+28>: mov w3, #0x0 // #0 0x0000000000400c50 <+32>: mov x2, #0x1 // Rust-for-Linux#1 0x0000000000400c54 <+36>: mov x1, x0 0x0000000000400c58 <+40>: ldr w0, [sp, Rust-for-Linux#28] 0x0000000000400c5c <+44>: bl 0x405e10 <mq_send> 0x0000000000400c60 <+48>: str w0, [sp, Rust-for-Linux#60] 0x0000000000400c64 <+52>: ldr w0, [sp, Rust-for-Linux#60] 0x0000000000400c68 <+56>: ldp x29, x30, [sp], Rust-for-Linux#64 0x0000000000400c6c <+60>: ret End of assembler dump. (gdb) info b No breakpoints or watchpoints. (gdb) c Continuing. Program received signal SIGILL, Illegal instruction. 0x0000000000400c30 in send () (gdb) x/10x 0x400c30 0x400c30 <send>: 0xd42000a0 0xfd030091 0xe01f00b9 0xe16f0039 0x400c40 <send+16>: 0xff1700f9 0xff1b00f9 0xe06f0091 0x03008052 0x400c50 <send+32>: 0x220080d2 0xe10300aa (gdb) disassemble 0x400c30 Dump of assembler code for function send: => 0x0000000000400c30 <+0>: .inst 0xa00020d4 ; undefined 0x0000000000400c34 <+4>: mov x29, sp 0x0000000000400c38 <+8>: str w0, [sp, Rust-for-Linux#28] 0x0000000000400c3c <+12>: strb w1, [sp, Rust-for-Linux#27] 0x0000000000400c40 <+16>: str xzr, [sp, Rust-for-Linux#40] Signed-off-by: junhua huang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
ojeda
pushed a commit
that referenced
this pull request
Sep 12, 2023
Occasionally, with './test_progs -j' on my vm, I will hit the following failure: test_cgrp_local_storage:PASS:join_cgroup /cgrp_local_storage 0 nsec test_cgroup_iter_sleepable:PASS:skel_open 0 nsec test_cgroup_iter_sleepable:PASS:skel_load 0 nsec test_cgroup_iter_sleepable:PASS:attach_iter 0 nsec test_cgroup_iter_sleepable:PASS:iter_create 0 nsec test_cgroup_iter_sleepable:FAIL:cgroup_id unexpected cgroup_id: actual 1 != expected 2812 #48/5 cgrp_local_storage/cgroup_iter_sleepable:FAIL #48 cgrp_local_storage:FAIL Finally, I decided to do some investigation since the test is introduced by myself. It turns out the reason is due to cgroup_fd with value 0. In cgroup_iter, a cgroup_fd of value 0 means the root cgroup. /* from cgroup_iter.c */ if (fd) cgrp = cgroup_v1v2_get_from_fd(fd); else if (id) cgrp = cgroup_get_from_id(id); else /* walk the entire hierarchy by default. */ cgrp = cgroup_get_from_path("/"); That is why we got cgroup_id 1 instead of expected 2812. Why we got a cgroup_fd 0? Nobody should really touch 'stdin' (fd 0) in test_progs. I traced 'close' syscall with stack trace and found the root cause, which is a bug in bpf_obj_pinning.c. Basically, the code closed fd 0 although it should not. Fixing the bug in bpf_obj_pinning.c also resolved the above cgroup_iter_sleepable subtest failure. Fixes: 3b22f98 ("selftests/bpf: Add path_fd-based BPF_OBJ_PIN and BPF_OBJ_GET tests") Signed-off-by: Yonghong Song <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
ojeda
pushed a commit
that referenced
this pull request
Dec 13, 2023
The `cgrp_local_storage` test triggers a kernel panic like: # ./test_progs -t cgrp_local_storage Can't find bpf_testmod.ko kernel module: -2 WARNING! Selftests relying on bpf_testmod.ko will be skipped. [ 550.930632] CPU 1 Unable to handle kernel paging request at virtual address 0000000000000080, era == ffff80000200be34, ra == ffff80000200be00 [ 550.931781] Oops[#1]: [ 550.931966] CPU: 1 PID: 1303 Comm: test_progs Not tainted 6.7.0-rc2-loong-devel-g2f56bb0d2327 #35 a896aca3f4164f09cc346f89f2e09832e07be5f6 [ 550.932215] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022 [ 550.932403] pc ffff80000200be34 ra ffff80000200be00 tp 9000000108350000 sp 9000000108353dc0 [ 550.932545] a0 0000000000000000 a1 0000000000000517 a2 0000000000000118 a3 00007ffffbb15558 [ 550.932682] a4 00007ffffbb15620 a5 90000001004e7700 a6 0000000000000021 a7 0000000000000118 [ 550.932824] t0 ffff80000200bdc0 t1 0000000000000517 t2 0000000000000517 t3 00007ffff1c06ee0 [ 550.932961] t4 0000555578ae04d0 t5 fffffffffffffff8 t6 0000000000000004 t7 0000000000000020 [ 550.933097] t8 0000000000000040 u0 00000000000007b8 s9 9000000108353e00 s0 90000001004e7700 [ 550.933241] s1 9000000004005000 s2 0000000000000001 s3 0000000000000000 s4 0000555555eb2ec8 [ 550.933379] s5 00007ffffbb15bb8 s6 00007ffff1dafd60 s7 000055555663f610 s8 00007ffff1db0050 [ 550.933520] ra: ffff80000200be00 bpf_prog_98f1b9e767be2a84_on_enter+0x40/0x200 [ 550.933911] ERA: ffff80000200be34 bpf_prog_98f1b9e767be2a84_on_enter+0x74/0x200 [ 550.934105] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 550.934596] PRMD: 00000004 (PPLV0 +PIE -PWE) [ 550.934712] EUEN: 00000003 (+FPE +SXE -ASXE -BTE) [ 550.934836] ECFG: 00071c1c (LIE=2-4,10-12 VS=7) [ 550.934976] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) [ 550.935097] BADV: 0000000000000080 [ 550.935181] PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) [ 550.935291] Modules linked in: [ 550.935391] Process test_progs (pid: 1303, threadinfo=000000006c3b1c41, task=0000000061f84a55) [ 550.935643] Stack : 00007ffffbb15bb8 0000555555eb2ec8 0000000000000000 0000000000000001 [ 550.935844] 9000000004005000 ffff80001b864000 00007ffffbb15450 90000000029aa034 [ 550.935990] 0000000000000000 9000000108353ec0 0000000000000118 d07d9dfb09721a09 [ 550.936175] 0000000000000001 0000000000000000 9000000108353ec0 0000000000000118 [ 550.936314] 9000000101d46ad0 900000000290abf0 000055555663f610 0000000000000000 [ 550.936479] 0000000000000003 9000000108353ec0 00007ffffbb15450 90000000029d7288 [ 550.936635] 00007ffff1dafd60 000055555663f610 0000000000000000 0000000000000003 [ 550.936779] 9000000108353ec0 90000000035dd1f0 00007ffff1dafd58 9000000002841c5c [ 550.936939] 0000000000000119 0000555555eea5a8 00007ffff1d78780 00007ffffbb153e0 [ 550.937083] ffffffffffffffda 00007ffffbb15518 0000000000000040 00007ffffbb15558 [ 550.937224] ... [ 550.937299] Call Trace: [ 550.937521] [<ffff80000200be34>] bpf_prog_98f1b9e767be2a84_on_enter+0x74/0x200 [ 550.937910] [<90000000029aa034>] bpf_trace_run2+0x90/0x154 [ 550.938105] [<900000000290abf0>] syscall_trace_enter.isra.0+0x1cc/0x200 [ 550.938224] [<90000000035dd1f0>] do_syscall+0x48/0x94 [ 550.938319] [<9000000002841c5c>] handle_syscall+0xbc/0x158 [ 550.938477] [ 550.938607] Code: 580009ae 50016000 262402e4 <28c20085> 14092084 03a00084 16000024 03240084 00150006 [ 550.938851] [ 550.939021] ---[ end trace 0000000000000000 ]--- Further investigation shows that this panic is triggered by memory load operations: ptr = bpf_cgrp_storage_get(&map_a, task->cgroups->dfl_cgrp, 0, BPF_LOCAL_STORAGE_GET_F_CREATE); The expression `task->cgroups->dfl_cgrp` involves two memory load. Since the field offset fits in imm12 or imm14, we use ldd or ldptrd instructions. But both instructions have the side effect that it will signed-extended the imm operand. Finally, we got the wrong addresses and panics is inevitable. Use a generic ldxd instruction to avoid this kind of issues. With this change, we have: # ./test_progs -t cgrp_local_storage Can't find bpf_testmod.ko kernel module: -2 WARNING! Selftests relying on bpf_testmod.ko will be skipped. test_cgrp_local_storage:PASS:join_cgroup /cgrp_local_storage 0 nsec #48/1 cgrp_local_storage/tp_btf:OK test_attach_cgroup:PASS:skel_open 0 nsec test_attach_cgroup:PASS:prog_attach 0 nsec test_attach_cgroup:PASS:prog_attach 0 nsec libbpf: prog 'update_cookie_tracing': failed to attach: ERROR: strerror_r(-524)=22 test_attach_cgroup:FAIL:prog_attach unexpected error: -524 #48/2 cgrp_local_storage/attach_cgroup:FAIL test_recursion:PASS:skel_open_and_load 0 nsec libbpf: prog 'on_lookup': failed to attach: ERROR: strerror_r(-524)=22 libbpf: prog 'on_lookup': failed to auto-attach: -524 test_recursion:FAIL:skel_attach unexpected error: -524 (errno 524) #48/3 cgrp_local_storage/recursion:FAIL #48/4 cgrp_local_storage/negative:OK #48/5 cgrp_local_storage/cgroup_iter_sleepable:OK test_yes_rcu_lock:PASS:skel_open 0 nsec test_yes_rcu_lock:PASS:skel_load 0 nsec libbpf: prog 'yes_rcu_lock': failed to attach: ERROR: strerror_r(-524)=22 libbpf: prog 'yes_rcu_lock': failed to auto-attach: -524 test_yes_rcu_lock:FAIL:skel_attach unexpected error: -524 (errno 524) #48/6 cgrp_local_storage/yes_rcu_lock:FAIL #48/7 cgrp_local_storage/no_rcu_lock:OK #48 cgrp_local_storage:FAIL All error logs: test_cgrp_local_storage:PASS:join_cgroup /cgrp_local_storage 0 nsec test_attach_cgroup:PASS:skel_open 0 nsec test_attach_cgroup:PASS:prog_attach 0 nsec test_attach_cgroup:PASS:prog_attach 0 nsec libbpf: prog 'update_cookie_tracing': failed to attach: ERROR: strerror_r(-524)=22 test_attach_cgroup:FAIL:prog_attach unexpected error: -524 #48/2 cgrp_local_storage/attach_cgroup:FAIL test_recursion:PASS:skel_open_and_load 0 nsec libbpf: prog 'on_lookup': failed to attach: ERROR: strerror_r(-524)=22 libbpf: prog 'on_lookup': failed to auto-attach: -524 test_recursion:FAIL:skel_attach unexpected error: -524 (errno 524) #48/3 cgrp_local_storage/recursion:FAIL test_yes_rcu_lock:PASS:skel_open 0 nsec test_yes_rcu_lock:PASS:skel_load 0 nsec libbpf: prog 'yes_rcu_lock': failed to attach: ERROR: strerror_r(-524)=22 libbpf: prog 'yes_rcu_lock': failed to auto-attach: -524 test_yes_rcu_lock:FAIL:skel_attach unexpected error: -524 (errno 524) #48/6 cgrp_local_storage/yes_rcu_lock:FAIL #48 cgrp_local_storage:FAIL Summary: 0/4 PASSED, 0 SKIPPED, 1 FAILED No panics any more (The test still failed because lack of BPF trampoline which I am actively working on). Fixes: 5dc6155 ("LoongArch: Add BPF JIT support") Signed-off-by: Hengqi Chen <[email protected]> Signed-off-by: Huacai Chen <[email protected]>
fbq
pushed a commit
that referenced
this pull request
Dec 28, 2023
Expanding the test coverage from cgroup2 to include cgroup1. The result as follows, Already existing test cases for cgroup2: #48/1 cgrp_local_storage/tp_btf:OK #48/2 cgrp_local_storage/attach_cgroup:OK #48/3 cgrp_local_storage/recursion:OK #48/4 cgrp_local_storage/negative:OK #48/5 cgrp_local_storage/cgroup_iter_sleepable:OK #48/6 cgrp_local_storage/yes_rcu_lock:OK #48/7 cgrp_local_storage/no_rcu_lock:OK Expanded test cases for cgroup1: #48/8 cgrp_local_storage/cgrp1_tp_btf:OK #48/9 cgrp_local_storage/cgrp1_recursion:OK #48/10 cgrp_local_storage/cgrp1_negative:OK #48/11 cgrp_local_storage/cgrp1_iter_sleepable:OK #48/12 cgrp_local_storage/cgrp1_yes_rcu_lock:OK #48/13 cgrp_local_storage/cgrp1_no_rcu_lock:OK Summary: #48 cgrp_local_storage:OK Summary: 1/13 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Yafang Shao <[email protected]> Acked-by: Tejun Heo <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin KaFai Lau <[email protected]>
ojeda
pushed a commit
that referenced
this pull request
Apr 29, 2024
Currently normal HugeTLB fault ends up crashing the kernel, as p4dp derived from p4d_offset() is an invalid address when PGTABLE_LEVEL = 5. A p4d level entry needs to be allocated when not available while walking the page table during HugeTLB faults. Let's call p4d_alloc() to allocate such entries when required instead of current p4d_offset(). Unable to handle kernel paging request at virtual address ffffffff80000000 Mem abort info: ESR = 0x0000000096000005 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault Data abort info: ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 swapper pgtable: 4k pages, 52-bit VAs, pgdp=0000000081da9000 [ffffffff80000000] pgd=1000000082cec003, p4d=0000000082c32003, pud=0000000000000000 Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP Modules linked in: CPU: 1 PID: 108 Comm: high_addr_hugep Not tainted 6.9.0-rc4 #48 Hardware name: Foundation-v8A (DT) pstate: 01402005 (nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : huge_pte_alloc+0xd4/0x334 lr : hugetlb_fault+0x1b8/0xc68 sp : ffff8000833bbc20 x29: ffff8000833bbc20 x28: fff000080080cb58 x27: ffff800082a7cc58 x26: 0000000000000000 x25: fff0000800378e40 x24: fff00008008d6c60 x23: 00000000de9dbf07 x22: fff0000800378e40 x21: 0004000000000000 x20: 0004000000000000 x19: ffffffff80000000 x18: 1ffe00010011d7a1 x17: 0000000000000001 x16: ffffffffffffffff x15: 0000000000000001 x14: 0000000000000000 x13: ffff8000816120d0 x12: ffffffffffffffff x11: 0000000000000000 x10: fff00008008ebd0c x9 : 0004000000000000 x8 : 0000000000001255 x7 : fff00008003e2000 x6 : 00000000061d54b0 x5 : 0000000000001000 x4 : ffffffff80000000 x3 : 0000000000200000 x2 : 0000000000000004 x1 : 0000000080000000 x0 : 0000000000000000 Call trace: huge_pte_alloc+0xd4/0x334 hugetlb_fault+0x1b8/0xc68 handle_mm_fault+0x260/0x29c do_page_fault+0xfc/0x47c do_translation_fault+0x68/0x74 do_mem_abort+0x44/0x94 el0_da+0x2c/0x9c el0t_64_sync_handler+0x70/0xc4 el0t_64_sync+0x190/0x194 Code: aa000084 cb010084 b24c2c84 8b130c93 (f9400260) ---[ end trace 0000000000000000 ]--- Cc: Will Deacon <[email protected]> Cc: Ard Biesheuvel <[email protected]> Cc: Ryan Roberts <[email protected]> Cc: Mark Rutland <[email protected]> Cc: [email protected] Cc: [email protected] Fixes: a6bbf5d ("arm64: mm: Add definitions to support 5 levels of paging") Reported-by: Dev Jain <[email protected]> Acked-by: Ard Biesheuvel <[email protected]> Acked-by: Mark Rutland <[email protected]> Signed-off-by: Anshuman Khandual <[email protected]> Reviewed-by: Ryan Roberts <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
Darksonn
pushed a commit
to Darksonn/linux
that referenced
this pull request
Oct 30, 2024
During the migration of Soundwire runtime stream allocation from the Qualcomm Soundwire controller to SoC's soundcard drivers the sdm845 soundcard was forgotten. At this point any playback attempt or audio daemon startup, for instance on sdm845-db845c (Qualcomm RB3 board), will result in stream pointer NULL dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000000101ecf000 [0000000000000020] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [Rust-for-Linux#1] PREEMPT SMP Modules linked in: ... CPU: 5 UID: 0 PID: 1198 Comm: aplay Not tainted 6.12.0-rc2-qcomlt-arm64-00059-g9d78f315a362-dirty Rust-for-Linux#18 Hardware name: Thundercomm Dragonboard 845c (DT) pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : sdw_stream_add_slave+0x44/0x380 [soundwire_bus] lr : sdw_stream_add_slave+0x44/0x380 [soundwire_bus] sp : ffff80008a2035c0 x29: ffff80008a2035c0 x28: ffff80008a203978 x27: 0000000000000000 x26: 00000000000000c0 x25: 0000000000000000 x24: ffff1676025f4800 x23: ffff167600ff1cb8 x22: ffff167600ff1c98 x21: 0000000000000003 x20: ffff167607316000 x19: ffff167604e64e80 x18: 0000000000000000 x17: 0000000000000000 x16: ffffcec265074160 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000000000000000 x7 : 0000000000000000 x6 : ffff167600ff1cec x5 : ffffcec22cfa2010 x4 : 0000000000000000 x3 : 0000000000000003 x2 : ffff167613f836c0 x1 : 0000000000000000 x0 : ffff16761feb60b8 Call trace: sdw_stream_add_slave+0x44/0x380 [soundwire_bus] wsa881x_hw_params+0x68/0x80 [snd_soc_wsa881x] snd_soc_dai_hw_params+0x3c/0xa4 __soc_pcm_hw_params+0x230/0x660 dpcm_be_dai_hw_params+0x1d0/0x3f8 dpcm_fe_dai_hw_params+0x98/0x268 snd_pcm_hw_params+0x124/0x460 snd_pcm_common_ioctl+0x998/0x16e8 snd_pcm_ioctl+0x34/0x58 __arm64_sys_ioctl+0xac/0xf8 invoke_syscall+0x48/0x104 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0xe0 el0t_64_sync_handler+0x120/0x12c el0t_64_sync+0x190/0x194 Code: aa0403fb f9418400 9100e000 9400102f (f8420f22) ---[ end trace 0000000000000000 ]--- 0000000000006108 <sdw_stream_add_slave>: 6108: d503233f paciasp 610c: a9b97bfd stp x29, x30, [sp, #-112]! 6110: 910003fd mov x29, sp 6114: a90153f3 stp x19, x20, [sp, Rust-for-Linux#16] 6118: a9025bf5 stp x21, x22, [sp, Rust-for-Linux#32] 611c: aa0103f6 mov x22, x1 6120: 2a0303f5 mov w21, w3 6124: a90363f7 stp x23, x24, [sp, Rust-for-Linux#48] 6128: aa0003f8 mov x24, x0 612c: aa0203f7 mov x23, x2 6130: a9046bf9 stp x25, x26, [sp, Rust-for-Linux#64] 6134: aa0403f9 mov x25, x4 <-- x4 copied to x25 6138: a90573fb stp x27, x28, [sp, Rust-for-Linux#80] 613c: aa0403fb mov x27, x4 6140: f9418400 ldr x0, [x0, Rust-for-Linux#776] 6144: 9100e000 add x0, x0, #0x38 6148: 94000000 bl 0 <mutex_lock> 614c: f8420f22 ldr x2, [x25, Rust-for-Linux#32]! <-- offset 0x44 ^^^ This is 0x6108 + offset 0x44 from the beginning of sdw_stream_add_slave() where data abort happens. wsa881x_hw_params() is called with stream = NULL and passes it further in register x4 (5th argument) to sdw_stream_add_slave() without any checks. Value from x4 is copied to x25 and finally it aborts on trying to load a value from address in x25 plus offset 32 (in dec) which corresponds to master_list member in struct sdw_stream_runtime: struct sdw_stream_runtime { const char * name; /* 0 8 */ struct sdw_stream_params params; /* 8 12 */ enum sdw_stream_state state; /* 20 4 */ enum sdw_stream_type type; /* 24 4 */ /* XXX 4 bytes hole, try to pack */ here-> struct list_head master_list; /* 32 16 */ int m_rt_count; /* 48 4 */ /* size: 56, cachelines: 1, members: 6 */ /* sum members: 48, holes: 1, sum holes: 4 */ /* padding: 4 */ /* last cacheline: 56 bytes */ Fix this by adding required calls to qcom_snd_sdw_startup() and sdw_release_stream() to startup and shutdown routines which restores the previous correct behaviour when ->set_stream() method is called to set a valid stream runtime pointer on playback startup. Reproduced and then fix was tested on db845c RB3 board. Reported-by: Dmitry Baryshkov <[email protected]> Cc: [email protected] Fixes: 15c7fab ("ASoC: qcom: Move Soundwire runtime stream alloc to soundcards") Cc: Srinivas Kandagatla <[email protected]> Cc: Dmitry Baryshkov <[email protected]> Cc: Krzysztof Kozlowski <[email protected]> Cc: Pierre-Louis Bossart <[email protected]> Signed-off-by: Alexey Klimov <[email protected]> Tested-by: Steev Klimaszewski <[email protected]> # Lenovo Yoga C630 Reviewed-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Srinivas Kandagatla <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Signed-off-by: Miguel Ojeda [email protected]