Bump the nuget group with 23 updates

[dependabot]

Updated Dapr.AspNetCore from 1.18.5 to 1.18.10.

Release notes

Sourced from Dapr.AspNetCore's releases.

1.18.10

What's Changed

• Actors: sync NotFound default-tracker entries after a reentrant save by @​olitomlinson in Actors: sync NotFound default-tracker entries after a reentrant save dapr/dotnet-sdk#1916

This is a fix for a regression introduced in v1.18.9!

Full Changelog: dapr/dotnet-sdk@v1.18.9...v1.18.10

1.18.9

What's Changed

• Test proving Actors.Next unaffected by reentrancy bug by @​WhitWaldo in Test proving Actors.Next unaffected by reentrancy bug dapr/dotnet-sdk#1911
• Reentrancy refresh in place by @​olitomlinson in Reentrancy refresh in place dapr/dotnet-sdk#1912
• Improve cache not found state in actors by @​WhitWaldo in Improve cache not found state in actors dapr/dotnet-sdk#1913
• Improving actor write performance by skipping runtime "exists" checks on state writes by @​WhitWaldo in Improving actor write performance by skipping runtime "exists" checks on state writes dapr/dotnet-sdk#1914

Huge thanks to @​olitomlinson for his eagle eye in spotting and filing an issue for each of these perf improvements. He shared a benchmark with me against 1.18.4 and this release in his dapr-mq message queue implementation atop Dapr demonstrated a dramatic improvement when modeling 20 publish/relay cycles:

• 54% fewer reads against runtime state
• Because of #​1913, "not found" was cached and resulted in a single runtime read instead of 44 on a circuit subscription
• Because of #​1914, there were no runtime reads incurred when publishing compared to a prior 21

Especially for implementations that favor heavy writes and updates, you should see similar improvement.

Full Changelog: dapr/dotnet-sdk@v1.18.8...v1.18.9

1.18.8

What's Changed

• (feat): Dapr.Messaging full implementation by @​WhitWaldo in (feat): Dapr.Messaging full implementation dapr/dotnet-sdk#1906
• Update Dapr.Actors.Next to use latest Dapr.Messaging pubsub bits instead of recreating streaming pubsub impl by @​WhitWaldo in Update Dapr.Actors.Next to use latest Dapr.Messaging pubsub bits instead of recreating streaming pubsub impl dapr/dotnet-sdk#1907

Dapr.Messaging Overhaul

Prior to this release, Dapr.Client provided basis publish and dynamic streaming subscription methods, Dapr.AspNetCore offered controller-based programmatic topic subscription and Dapr.Messaging offered streaming subscription support. In this release. Dapr.Messaging now unifies and modernizes the approach:

1. Unified publishing and subscribing: Publish events with IDaprPublishSubscribeClient (including single events, raw byte streams, and bulk publishing) and author subscribers using a single ITopicHandler<TMessage> interface.
2. Three unified delivery modes: Subscriptions support DeliveryMode.Streaming (streaming subscriptions), DeliveryMode.Programmatic (programmatic subscriptions), and DeliveryMode.Http (declarative subscriptions), all configured through the same [DaprTopic] attribute.
3. Source generators eliminate reflection: The Dapr.Messaging.Generators source generator inspects [DaprTopic] handlers at compile time and emits typed dispatchers, subscriber registries, and dependency injection wiring. No runtime reflection or runtime code generation is performed on the invocation path, dramatically improving startup times.
4. AOT and trimming considerations: Like other modern Dapr packages, this package was also built with AOT in mind, but with some considerations. Handler discovery and dispatch registration are generated at compile time, but the current generated subscriber dispatchers use runtime System.Text.Json metadata. Native AOT and trimming scenarios require explicit validation with the target SDK version.
5. Roslyn analyzers and diagnostics: The SDK includes 8 new analyzers DAPR1610 through DAPR1617 that catch misconfigurations directly in your IDE at you write code
6. Standard options and simplified DI: Uses IOptions<DaprMessagingOptions> and a single services.AddDaprMessaging() method that registers options, the publishing client, source-generated subscriber dispatches, and required hosting services in a single atomic operation.

Read more about this new functionality in the docs!

Full Changelog: dapr/dotnet-sdk@v1.18.7...v1.18.8

1.18.7

What's Changed

• Fixing transient security vulnerability by @​WhitWaldo in Fixing transient security vulnerability dapr/dotnet-sdk#1905

Full Changelog: dapr/dotnet-sdk@v1.18.6...v1.18.7

1.18.6

What's Changed

Vulnerabilities Fixed

• build: lift transitive SSH.NET above the GHSA-q939-rpr3-3284 vulnerable range by @​JoshVanL in build: lift transitive SSH.NET above the GHSA-q939-rpr3-3284 vulnerable range dapr/dotnet-sdk#1881

Issue-Specific Resolutions

• Supporting generic base class in workflows by @​WhitWaldo in Supporting generic base class in workflows dapr/dotnet-sdk#1885 resolving the issue at Workflow versioning source generator fails with compile errors for generic workflow base classes dapr/dotnet-sdk#1859
• Timezone accepted when scheduling jobs by @​WhitWaldo in Timezone accepted when scheduling jobs dapr/dotnet-sdk#1884 resolving the issue at DaprJobSchedule doesn't support CRON_TZ dapr/dotnet-sdk#1883
• Extracting interface from WorkflowState to facilitate easier testing by @​WhitWaldo in Extracting interface from WorkflowState to facilitate easier testing dapr/dotnet-sdk#1887 resolving the issue at Make WorkflowState publically constructable so it can be used in tests by consumers dapr/dotnet-sdk#1756
• Added updated CloudEvent properties to SDK, refactoring to use them throughout by @​WhitWaldo in Added updated CloudEvent properties to SDK, refactoring to use them throughout dapr/dotnet-sdk#1889 resolving the issue at Uplift the CloudEvent class to support the ce fields that dapr supports dapr/dotnet-sdk#1161
• Adding support for purge/list of Jobs by @​WhitWaldo in Adding support for purge/list of Jobs dapr/dotnet-sdk#1890 resolving the issue at Jobs: Add list/purge support dapr/dotnet-sdk#1840
• Do not send binary gRPC metadata on InvokeBinding calls by @​JoshVanL in Do not send binary gRPC metadata on InvokeBinding calls dapr/dotnet-sdk#1901 resolving the issue at Publish to servicebusqueue binding throws error invoking output binding <binding name>: (connlost): not a valid UTF-8 string dapr/dotnet-sdk#1897
• Workflow generator supports abstract classes by @​WhitWaldo in Workflow generator supports abstract classes dapr/dotnet-sdk#1902 resolving the issue at [Dapr.Workflow 1.18] Code generation for registration of workflows does not distinguish between abstract and concrete classes. dapr/dotnet-sdk#1898

New Features

• Adding support for Jobs gRPC implementation to SDK alongside HTTP by @​WhitWaldo in Adding support for Jobs gRPC implementation to SDK alongside HTTP dapr/dotnet-sdk#1886
• feat: State transaction composition convenience methods by @​Psingle20 in feat: State transaction composition convenience methods dapr/dotnet-sdk#1863
• Improve error handling and automatic reconnection of PubSub streaming message handler by @​WhitWaldo in Improve error handling and automatic reconnection of PubSub streaming message handler dapr/dotnet-sdk#1888
• Add per-actor-type runtime configuration overrides to Actors Next by @​m3nax in Add per-actor-type runtime configuration overrides to Actors Next dapr/dotnet-sdk#1879
• Fix stale gRPC endpoints after app-first startup retries by @​WhitWaldo with @​Copilot in Fix stale gRPC endpoints after app-first startup retries dapr/dotnet-sdk#1896
• workflow: seed the guid namespace from history when the request has no execution ID by @​JoshVanL in workflow: seed the guid namespace from history when the request has n… dapr/dotnet-sdk#1880
• Make Actors.Next runtime option defaults nullable and unset by @​JoshVanL in Make Actors.Next runtime option defaults nullable and unset dapr/dotnet-sdk#1903

New Contributors

• @​Psingle20 made their first contribution in feat: State transaction composition convenience methods dapr/dotnet-sdk#1863

Full Changelog: dapr/dotnet-sdk@v1.18.5...v1.18.6

Commits viewable in compare view.

Updated Dapr.Client from 1.18.5 to 1.18.10.

Release notes

Sourced from Dapr.Client's releases.

1.18.10

What's Changed

• Actors: sync NotFound default-tracker entries after a reentrant save by @​olitomlinson in Actors: sync NotFound default-tracker entries after a reentrant save dapr/dotnet-sdk#1916

This is a fix for a regression introduced in v1.18.9!

Full Changelog: dapr/dotnet-sdk@v1.18.9...v1.18.10

1.18.9

What's Changed

• Test proving Actors.Next unaffected by reentrancy bug by @​WhitWaldo in Test proving Actors.Next unaffected by reentrancy bug dapr/dotnet-sdk#1911
• Reentrancy refresh in place by @​olitomlinson in Reentrancy refresh in place dapr/dotnet-sdk#1912
• Improve cache not found state in actors by @​WhitWaldo in Improve cache not found state in actors dapr/dotnet-sdk#1913
• Improving actor write performance by skipping runtime "exists" checks on state writes by @​WhitWaldo in Improving actor write performance by skipping runtime "exists" checks on state writes dapr/dotnet-sdk#1914

Huge thanks to @​olitomlinson for his eagle eye in spotting and filing an issue for each of these perf improvements. He shared a benchmark with me against 1.18.4 and this release in his dapr-mq message queue implementation atop Dapr demonstrated a dramatic improvement when modeling 20 publish/relay cycles:

• 54% fewer reads against runtime state
• Because of #​1913, "not found" was cached and resulted in a single runtime read instead of 44 on a circuit subscription
• Because of #​1914, there were no runtime reads incurred when publishing compared to a prior 21

Especially for implementations that favor heavy writes and updates, you should see similar improvement.

Full Changelog: dapr/dotnet-sdk@v1.18.8...v1.18.9

1.18.8

What's Changed

• (feat): Dapr.Messaging full implementation by @​WhitWaldo in (feat): Dapr.Messaging full implementation dapr/dotnet-sdk#1906
• Update Dapr.Actors.Next to use latest Dapr.Messaging pubsub bits instead of recreating streaming pubsub impl by @​WhitWaldo in Update Dapr.Actors.Next to use latest Dapr.Messaging pubsub bits instead of recreating streaming pubsub impl dapr/dotnet-sdk#1907

Dapr.Messaging Overhaul

Prior to this release, Dapr.Client provided basis publish and dynamic streaming subscription methods, Dapr.AspNetCore offered controller-based programmatic topic subscription and Dapr.Messaging offered streaming subscription support. In this release. Dapr.Messaging now unifies and modernizes the approach:

1. Unified publishing and subscribing: Publish events with IDaprPublishSubscribeClient (including single events, raw byte streams, and bulk publishing) and author subscribers using a single ITopicHandler<TMessage> interface.
2. Three unified delivery modes: Subscriptions support DeliveryMode.Streaming (streaming subscriptions), DeliveryMode.Programmatic (programmatic subscriptions), and DeliveryMode.Http (declarative subscriptions), all configured through the same [DaprTopic] attribute.
3. Source generators eliminate reflection: The Dapr.Messaging.Generators source generator inspects [DaprTopic] handlers at compile time and emits typed dispatchers, subscriber registries, and dependency injection wiring. No runtime reflection or runtime code generation is performed on the invocation path, dramatically improving startup times.
4. AOT and trimming considerations: Like other modern Dapr packages, this package was also built with AOT in mind, but with some considerations. Handler discovery and dispatch registration are generated at compile time, but the current generated subscriber dispatchers use runtime System.Text.Json metadata. Native AOT and trimming scenarios require explicit validation with the target SDK version.
5. Roslyn analyzers and diagnostics: The SDK includes 8 new analyzers DAPR1610 through DAPR1617 that catch misconfigurations directly in your IDE at you write code
6. Standard options and simplified DI: Uses IOptions<DaprMessagingOptions> and a single services.AddDaprMessaging() method that registers options, the publishing client, source-generated subscriber dispatches, and required hosting services in a single atomic operation.

Read more about this new functionality in the docs!

Full Changelog: dapr/dotnet-sdk@v1.18.7...v1.18.8

1.18.7

What's Changed

• Fixing transient security vulnerability by @​WhitWaldo in Fixing transient security vulnerability dapr/dotnet-sdk#1905

Full Changelog: dapr/dotnet-sdk@v1.18.6...v1.18.7

1.18.6

What's Changed

Vulnerabilities Fixed

• build: lift transitive SSH.NET above the GHSA-q939-rpr3-3284 vulnerable range by @​JoshVanL in build: lift transitive SSH.NET above the GHSA-q939-rpr3-3284 vulnerable range dapr/dotnet-sdk#1881

Issue-Specific Resolutions

• Supporting generic base class in workflows by @​WhitWaldo in Supporting generic base class in workflows dapr/dotnet-sdk#1885 resolving the issue at Workflow versioning source generator fails with compile errors for generic workflow base classes dapr/dotnet-sdk#1859
• Timezone accepted when scheduling jobs by @​WhitWaldo in Timezone accepted when scheduling jobs dapr/dotnet-sdk#1884 resolving the issue at DaprJobSchedule doesn't support CRON_TZ dapr/dotnet-sdk#1883
• Extracting interface from WorkflowState to facilitate easier testing by @​WhitWaldo in Extracting interface from WorkflowState to facilitate easier testing dapr/dotnet-sdk#1887 resolving the issue at Make WorkflowState publically constructable so it can be used in tests by consumers dapr/dotnet-sdk#1756
• Added updated CloudEvent properties to SDK, refactoring to use them throughout by @​WhitWaldo in Added updated CloudEvent properties to SDK, refactoring to use them throughout dapr/dotnet-sdk#1889 resolving the issue at Uplift the CloudEvent class to support the ce fields that dapr supports dapr/dotnet-sdk#1161
• Adding support for purge/list of Jobs by @​WhitWaldo in Adding support for purge/list of Jobs dapr/dotnet-sdk#1890 resolving the issue at Jobs: Add list/purge support dapr/dotnet-sdk#1840
• Do not send binary gRPC metadata on InvokeBinding calls by @​JoshVanL in Do not send binary gRPC metadata on InvokeBinding calls dapr/dotnet-sdk#1901 resolving the issue at Publish to servicebusqueue binding throws error invoking output binding <binding name>: (connlost): not a valid UTF-8 string dapr/dotnet-sdk#1897
• Workflow generator supports abstract classes by @​WhitWaldo in Workflow generator supports abstract classes dapr/dotnet-sdk#1902 resolving the issue at [Dapr.Workflow 1.18] Code generation for registration of workflows does not distinguish between abstract and concrete classes. dapr/dotnet-sdk#1898

New Features

• Adding support for Jobs gRPC implementation to SDK alongside HTTP by @​WhitWaldo in Adding support for Jobs gRPC implementation to SDK alongside HTTP dapr/dotnet-sdk#1886
• feat: State transaction composition convenience methods by @​Psingle20 in feat: State transaction composition convenience methods dapr/dotnet-sdk#1863
• Improve error handling and automatic reconnection of PubSub streaming message handler by @​WhitWaldo in Improve error handling and automatic reconnection of PubSub streaming message handler dapr/dotnet-sdk#1888
• Add per-actor-type runtime configuration overrides to Actors Next by @​m3nax in Add per-actor-type runtime configuration overrides to Actors Next dapr/dotnet-sdk#1879
• Fix stale gRPC endpoints after app-first startup retries by @​WhitWaldo with @​Copilot in Fix stale gRPC endpoints after app-first startup retries dapr/dotnet-sdk#1896
• workflow: seed the guid namespace from history when the request has no execution ID by @​JoshVanL in workflow: seed the guid namespace from history when the request has n… dapr/dotnet-sdk#1880
• Make Actors.Next runtime option defaults nullable and unset by @​JoshVanL in Make Actors.Next runtime option defaults nullable and unset dapr/dotnet-sdk#1903

New Contributors

• @​Psingle20 made their first contribution in feat: State transaction composition convenience methods dapr/dotnet-sdk#1863

Full Changelog: dapr/dotnet-sdk@v1.18.5...v1.18.6

Commits viewable in compare view.

Updated Dapr.Workflow from 1.18.5 to 1.18.10.

Release notes

Sourced from Dapr.Workflow's releases.

1.18.10

What's Changed

• Actors: sync NotFound default-tracker entries after a reentrant save by @​olitomlinson in Actors: sync NotFound default-tracker entries after a reentrant save dapr/dotnet-sdk#1916

This is a fix for a regression introduced in v1.18.9!

Full Changelog: dapr/dotnet-sdk@v1.18.9...v1.18.10

1.18.9

What's Changed

• Test proving Actors.Next unaffected by reentrancy bug by @​WhitWaldo in Test proving Actors.Next unaffected by reentrancy bug dapr/dotnet-sdk#1911
• Reentrancy refresh in place by @​olitomlinson in Reentrancy refresh in place dapr/dotnet-sdk#1912
• Improve cache not found state in actors by @​WhitWaldo in Improve cache not found state in actors dapr/dotnet-sdk#1913
• Improving actor write performance by skipping runtime "exists" checks on state writes by @​WhitWaldo in Improving actor write performance by skipping runtime "exists" checks on state writes dapr/dotnet-sdk#1914

Huge thanks to @​olitomlinson for his eagle eye in spotting and filing an issue for each of these perf improvements. He shared a benchmark with me against 1.18.4 and this release in his dapr-mq message queue implementation atop Dapr demonstrated a dramatic improvement when modeling 20 publish/relay cycles:

• 54% fewer reads against runtime state
• Because of #​1913, "not found" was cached and resulted in a single runtime read instead of 44 on a circuit subscription
• Because of #​1914, there were no runtime reads incurred when publishing compared to a prior 21

Especially for implementations that favor heavy writes and updates, you should see similar improvement.

Full Changelog: dapr/dotnet-sdk@v1.18.8...v1.18.9

1.18.8

What's Changed

• (feat): Dapr.Messaging full implementation by @​WhitWaldo in (feat): Dapr.Messaging full implementation dapr/dotnet-sdk#1906
• Update Dapr.Actors.Next to use latest Dapr.Messaging pubsub bits instead of recreating streaming pubsub impl by @​WhitWaldo in Update Dapr.Actors.Next to use latest Dapr.Messaging pubsub bits instead of recreating streaming pubsub impl dapr/dotnet-sdk#1907

Dapr.Messaging Overhaul

Prior to this release, Dapr.Client provided basis publish and dynamic streaming subscription methods, Dapr.AspNetCore offered controller-based programmatic topic subscription and Dapr.Messaging offered streaming subscription support. In this release. Dapr.Messaging now unifies and modernizes the approach:

1. Unified publishing and subscribing: Publish events with IDaprPublishSubscribeClient (including single events, raw byte streams, and bulk publishing) and author subscribers using a single ITopicHandler<TMessage> interface.
2. Three unified delivery modes: Subscriptions support DeliveryMode.Streaming (streaming subscriptions), DeliveryMode.Programmatic (programmatic subscriptions), and DeliveryMode.Http (declarative subscriptions), all configured through the same [DaprTopic] attribute.
3. Source generators eliminate reflection: The Dapr.Messaging.Generators source generator inspects [DaprTopic] handlers at compile time and emits typed dispatchers, subscriber registries, and dependency injection wiring. No runtime reflection or runtime code generation is performed on the invocation path, dramatically improving startup times.
4. AOT and trimming considerations: Like other modern Dapr packages, this package was also built with AOT in mind, but with some considerations. Handler discovery and dispatch registration are generated at compile time, but the current generated subscriber dispatchers use runtime System.Text.Json metadata. Native AOT and trimming scenarios require explicit validation with the target SDK version.
5. Roslyn analyzers and diagnostics: The SDK includes 8 new analyzers DAPR1610 through DAPR1617 that catch misconfigurations directly in your IDE at you write code
6. Standard options and simplified DI: Uses IOptions<DaprMessagingOptions> and a single services.AddDaprMessaging() method that registers options, the publishing client, source-generated subscriber dispatches, and required hosting services in a single atomic operation.

Read more about this new functionality in the docs!

Full Changelog: dapr/dotnet-sdk@v1.18.7...v1.18.8

1.18.7

What's Changed

• Fixing transient security vulnerability by @​WhitWaldo in Fixing transient security vulnerability dapr/dotnet-sdk#1905

Full Changelog: dapr/dotnet-sdk@v1.18.6...v1.18.7

1.18.6

What's Changed

Vulnerabilities Fixed

• build: lift transitive SSH.NET above the GHSA-q939-rpr3-3284 vulnerable range by @​JoshVanL in build: lift transitive SSH.NET above the GHSA-q939-rpr3-3284 vulnerable range dapr/dotnet-sdk#1881

Issue-Specific Resolutions

• Supporting generic base class in workflows by @​WhitWaldo in Supporting generic base class in workflows dapr/dotnet-sdk#1885 resolving the issue at Workflow versioning source generator fails with compile errors for generic workflow base classes dapr/dotnet-sdk#1859
• Timezone accepted when scheduling jobs by @​WhitWaldo in Timezone accepted when scheduling jobs dapr/dotnet-sdk#1884 resolving the issue at DaprJobSchedule doesn't support CRON_TZ dapr/dotnet-sdk#1883
• Extracting interface from WorkflowState to facilitate easier testing by @​WhitWaldo in Extracting interface from WorkflowState to facilitate easier testing dapr/dotnet-sdk#1887 resolving the issue at Make WorkflowState publically constructable so it can be used in tests by consumers dapr/dotnet-sdk#1756
• Added updated CloudEvent properties to SDK, refactoring to use them throughout by @​WhitWaldo in Added updated CloudEvent properties to SDK, refactoring to use them throughout dapr/dotnet-sdk#1889 resolving the issue at Uplift the CloudEvent class to support the ce fields that dapr supports dapr/dotnet-sdk#1161
• Adding support for purge/list of Jobs by @​WhitWaldo in Adding support for purge/list of Jobs dapr/dotnet-sdk#1890 resolving the issue at Jobs: Add list/purge support dapr/dotnet-sdk#1840
• Do not send binary gRPC metadata on InvokeBinding calls by @​JoshVanL in Do not send binary gRPC metadata on InvokeBinding calls dapr/dotnet-sdk#1901 resolving the issue at Publish to servicebusqueue binding throws error invoking output binding <binding name>: (connlost): not a valid UTF-8 string dapr/dotnet-sdk#1897
• Workflow generator supports abstract classes by @​WhitWaldo in Workflow generator supports abstract classes dapr/dotnet-sdk#1902 resolving the issue at [Dapr.Workflow 1.18] Code generation for registration of workflows does not distinguish between abstract and concrete classes. dapr/dotnet-sdk#1898

New Features

• Adding support for Jobs gRPC implementation to SDK alongside HTTP by @​WhitWaldo in Adding support for Jobs gRPC implementation to SDK alongside HTTP dapr/dotnet-sdk#1886
• feat: State transaction composition convenience methods by @​Psingle20 in feat: State transaction composition convenience methods dapr/dotnet-sdk#1863
• Improve error handling and automatic reconnection of PubSub streaming message handler by @​WhitWaldo in Improve error handling and automatic reconnection of PubSub streaming message handler dapr/dotnet-sdk#1888
• Add per-actor-type runtime configuration overrides to Actors Next by @​m3nax in Add per-actor-type runtime configuration overrides to Actors Next dapr/dotnet-sdk#1879
• Fix stale gRPC endpoints after app-first startup retries by @​WhitWaldo with @​Copilot in Fix stale gRPC endpoints after app-first startup retries dapr/dotnet-sdk#1896
• workflow: seed the guid namespace from history when the request has no execution ID by @​JoshVanL in workflow: seed the guid namespace from history when the request has n… dapr/dotnet-sdk#1880
• Make Actors.Next runtime option defaults nullable and unset by @​JoshVanL in Make Actors.Next runtime option defaults nullable and unset dapr/dotnet-sdk#1903

New Contributors

• @​Psingle20 made their first contribution in feat: State transaction composition convenience methods dapr/dotnet-sdk#1863

Full Changelog: dapr/dotnet-sdk@v1.18.5...v1.18.6

Commits viewable in compare view.

Updated Microsoft.AspNetCore.Authentication.JwtBearer from 10.0.10 to 10.0.12.

Release notes

Sourced from Microsoft.AspNetCore.Authentication.JwtBearer's releases.

No release notes found for this version range.

Commits viewable in compare view.

Updated Microsoft.AspNetCore.Mvc.Testing from 10.0.10 to 10.0.12.

Release notes

Sourced from Microsoft.AspNetCore.Mvc.Testing's releases.

No release notes found for this version range.

Commits viewable in compare view.

Updated Microsoft.AspNetCore.OpenApi from 10.0.10 to 10.0.12.

Release notes

Sourced from Microsoft.AspNetCore.OpenApi's releases.

No release notes found for this version range.

Commits viewable in compare view.

Updated Microsoft.AspNetCore.TestHost from 10.0.10 to 10.0.12.

Release notes

Sourced from Microsoft.AspNetCore.TestHost's releases.

No release notes found for this version range.

Commits viewable in compare view.

Updated Microsoft.EntityFrameworkCore from 10.0.10 to 10.0.12.

Release notes

Sourced from Microsoft.EntityFrameworkCore's releases.

No release notes found for this version range.

Commits viewable in compare view.

Updated Microsoft.EntityFrameworkCore.Design from 10.0.10 to 10.0.12.

Release notes

Sourced from Microsoft.EntityFrameworkCore.Design's releases.

No release notes found for this version range.

Commits viewable in compare view.

Updated Microsoft.EntityFrameworkCore.InMemory from 10.0.10 to 10.0.12.

Release notes

Sourced from Microsoft.EntityFrameworkCore.InMemory's releases.

No release notes found for this version range.

Commits viewable in compare view.

Updated Microsoft.Extensions.Diagnostics.HealthChecks.EntityFrameworkCore from 10.0.10 to 10.0.12.

Release notes

Sourced from Microsoft.Extensions.Diagnostics.HealthChecks.EntityFrameworkCore's releases.

No release notes found for this version range.

Commits viewable in compare view.

Updated Microsoft.IdentityModel.Tokens from 8.22.0 to 8.23.0.

Release notes

Sourced from Microsoft.IdentityModel.Tokens's releases.

8.23.0

What's Changed

• Backport configurable SHR p claim path comparison to 8.x by @​debchoudhury-id4s in Backport configurable SHR p claim path comparison to 8.x AzureAD/azure-activedirectory-identitymodel-extensions-for-dotnet#3577
• Backport SHR p-claim percent-encoding hex case handling to dev8x by @​debchoudhury-id4s in Backport SHR p-claim percent-encoding hex case handling to dev8x AzureAD/azure-activedirectory-identitymodel-extensions-for-dotnet#3579
• Reinstate Microsoft.IdentityModel.Protocols.WsTrust as a supported 8.x package by @​iNinja in Reinstate Microsoft.IdentityModel.Protocols.WsTrust as a supported 8.x package AzureAD/azure-activedirectory-identitymodel-extensions-for-dotnet#3547
• Include WS-Trust in build pipelines by @​iNinja in Include WS-Trust in build pipelines AzureAD/azure-activedirectory-identitymodel-extensions-for-dotnet#3604
• Log IDX10650 decryption-tag failures below Error during multi-key decryption by @​RojaEnnam in Log IDX10650 decryption-tag failures below Error during multi-key decryption AzureAD/azure-activedirectory-identitymodel-extensions-for-dotnet#3582
• Support ML-DSA AKP keys in JsonWebKeySet by @​iNinja in Support ML-DSA AKP keys in JsonWebKeySet AzureAD/azure-activedirectory-identitymodel-extensions-for-dotnet#3597
• Add Composite ML-DSA support (internal, gated) by @​iNinja in Add Composite ML-DSA support (internal, gated) AzureAD/azure-activedirectory-identitymodel-extensions-for-dotnet#3596

Full Changelog: AzureAD/azure-activedirectory-identitymodel-extensions-for-dotnet@8.22.0...8.23.0

Commits viewable in compare view.

Updated Microsoft.NET.Test.Sdk from 18.8.1 to 18.10.1.

Release notes

Sourced from Microsoft.NET.Test.Sdk's releases.

18.10.1

What's Changed

• Isolate code coverage files in published output by @​azat-msft in [rel/18.10] Isolate code coverage files in published output microsoft/vstest#16476

Full Changelog: microsoft/vstest@v18.10.0...v18.10.1

18.10.0

What's Changed

• Drop Mono fallback, run .NET Framework tests on Windows only by @​nohwnd in Drop Mono fallback, run .NET Framework tests on Windows only microsoft/vstest#16158
• Run Microsoft.Testing.Platform test apps under vstest.console and datacollector by @​nohwnd in Run Microsoft.Testing.Platform test apps under vstest.console and datacollector microsoft/vstest#16201
• Fix test output eaten by MSBuild terminal logger by @​nohwnd in [fix] Fix test output eaten by MSBuild terminal logger microsoft/vstest#16223
• Remove the experimental test session feature by @​nohwnd in Remove the experimental test session feature microsoft/vstest#16231
• Skip a single bad executor instead of failing all executor loading by @​nohwnd in Skip a single bad executor instead of failing all executor loading microsoft/vstest#16239
• Assert apartment state instead of using Clipboard in UI tests by @​nohwnd in Assert apartment state instead of using Clipboard in UI tests microsoft/vstest#16270
• Surface test host crashes during protocol negotiation by @​nohwnd in Surface test host crashes during protocol negotiation microsoft/vstest#16285
• Pass the inferred target platform to the host in run settings by @​nohwnd in Pass the inferred target platform to the host in run settings microsoft/vstest#16271
• Report raw invalid IsTargetPlatformInferred value, cover host x64 forcing by @​nohwnd in Report raw invalid IsTargetPlatformInferred value, cover host x64 forcing microsoft/vstest#16295
• Disable the MTP testhost by default (#​16337) by @​nohwnd in [rel/18.10] Disable the MTP testhost by default (#16337) microsoft/vstest#16341

Full Changelog: microsoft/vstest@v18.9.0...v18.10.0

18.9.0

What's Changed

• Fix tilde/exclamation characters corrupted in TerminalLogger test output by @​nohwnd in [fix] Fix tilde/exclamation characters corrupted in TerminalLogger test output microsoft/vstest#16046
• Make TranslationLayer Native AOT-compatible by @​drewnoakes in Make TranslationLayer Native AOT-compatible microsoft/vstest#16045
• Guard GenerateProgramFile target against UseWinUI/UseUwpTools evaluation order by @​nohwnd in [fix] fix: guard GenerateProgramFile target against UseWinUI/UseUwpTools evaluation order microsoft/vstest#16072
• Add RequestingAssembly to AssemblyResolveEventArgs for binary compat by @​nohwnd in [fix] fix: add RequestingAssembly to AssemblyResolveEventArgs for binary compat microsoft/vstest#16076
• Remove stale Microsoft.Extensions.FileSystemGlobbing binding redirect from testhost.x86 and datacollector by @​Evangelink in Remove stale Microsoft.Extensions.FileSystemGlobbing binding redirect from testhost.x86 and datacollector microsoft/vstest#16082
• Fix TRX attachment paths when LogFileName contains a subdirectory by @​nohwnd in [fix] Fix TRX attachment paths when LogFileName contains a subdirectory microsoft/vstest#15791
• Fix missing dumps for .NET Framework child processes in NetClientHangDumper by @​nohwnd in [fix] Fix missing dumps for .NET Framework child processes in NetClientHangDumper microsoft/vstest#16098
• Fix data collection channels to use negotiated protocol version instead of V1 by @​nohwnd in [fix] Fix data collection channels to use negotiated protocol version instead of V1 microsoft/vstest#16096
• Fix race condition in BlameCollector: skip hang dump when testhost hasn't launched yet by @​nohwnd in [fix] Fix race condition in BlameCollector: skip hang dump when testhost hasn't launched yet microsoft/vstest#16065
• Replace TestSDKAutoGeneratedCode with ExcludeFromCodeCoverage in auto-generated Program files by @​nohwnd in [fix] Replace TestSDKAutoGeneratedCode with ExcludeFromCodeCoverage in auto-generated Program files microsoft/vstest#16101
• Include testhost process path in crash error messages by @​nohwnd in [fix] Include testhost process path in crash error messages microsoft/vstest#16108
• Fix DataDriven test results being double-counted in TRX logger totals by @​nohwnd in [fix] Fix DataDriven test results being double-counted in TRX logger totals microsoft/vstest#15766
• Fix datacollector crash visibility: replace Assert with throwable exceptions by @​nohwnd in [fix] Fix datacollector crash visibility: replace Assert with throwable exceptions microsoft/vstest#16048
• Add TreatErrorMessagesAsWarnings parameter to TRX logger by @​nohwnd in [fix] Add TreatErrorMessagesAsWarnings parameter to TRX logger microsoft/vstest#16106
• Wait for testhost stderr to drain before reading its crash output by @​nohwnd in Wait for testhost stderr to drain before reading its crash output microsoft/vstest#16128
• Handle runtimeconfig.dev.json without additionalProbingPaths by @​tmat in Handle runtimeconfig.dev.json without additionalProbingPaths microsoft/vstest#16166
• Suggest Microsoft.NET.Test.Sdk when a managed test project brings no testhost by @​nohwnd in Suggest Microsoft.NET.Test.Sdk when a managed test project brings no testhost microsoft/vstest#16169
• Fix x86 testhost loading mismatched x64 hostfxr (0x800700C1) when run via vstest.console.exe directly (#​16151) by @​azat-msft in Fix x86 testhost loading mismatched x64 hostfxr (0x800700C1) when run via vstest.console.exe directly (#16151) microsoft/vstest#16156
• Preserve the real exception (type + stack trace) when a test run aborts in BaseRunTests by @​nohwnd in [fix] Preserve the real exception (type + stack trace) when a test run aborts in BaseRunTests microsoft/vstest#16167

New Contributors

• @​drewnoakes made their first contribution in Make TranslationLayer Native AOT-compatible microsoft/vstest#16045

Full Changelog: microsoft/vstest@v18.8.0...v18.9.0

Commits viewable in compare view.

Updated Microsoft.OpenApi from 2.11.0 to 2.12.0.

Release notes

Sourced from Microsoft.OpenApi's releases.

2.12.0

2.12.0 (2026-08-12)

Features

• adds deserialization of the example extension (095ae3b)
• serialize license identifier as extension for earlier versions (d5cdce8)
• serialize license identifier as extension for earlier versions (fde38d8)

Bug Fixes

• better nullability round-tripping (7a25659)
• bound YAML anchor/alias expansion to prevent OOM (billion laughs) (#​3000) (a361360)
• bound YAML anchor/alias expansion to prevent OOM (billion laughs) (#​3000) (4db9af0)
• library: serialize multiple schema types as anyOf/oneOf for OpenAPI 3.0 (6568896)
• marks deprecated properties from the specification as obsolete (26aba69)
• marks deprecated properties from the specification as obsolete (abc5301)
• schema: serialize compatibility examples from examples list (be57a7c)
• serialize examples as extension in v2/v3 (d27141b)

Commits viewable in compare view.

Updated Microsoft.OpenApi from 2.11.0 to 2.12.2.

Release notes

Sourced from Microsoft.OpenApi's releases.

2.12.2

2.12.2 (2026-08-20)

Bug Fixes

• duplicate schema example when serializing to v2 (#​3046) (a6366be)

2.12.1

2.12.1 (2026-08-19)

Bug Fixes

• circular ref guard (#​3033) (#​3039) (406e6fd)
• harden yaml parsing (#​3034) (fdc5718)

2.12.0

2.12.0 (2026-08-12)

Features

• adds deserialization of the example extension (095ae3b)
• serialize license identifier as extension for earlier versions (d5cdce8)
• serialize license identifier as extension for earlier versions (fde38d8)

Bug Fixes

• better nullability round-tripping (7a25659)
• bound YAML anchor/alias expansion to prevent OOM (billion laughs) (#​3000) (a361360)
• bound YAML anchor/alias expansion to prevent OOM (billion laughs) (#​3000) (4db9af0)
• library: serialize multiple schema types as anyOf/oneOf for OpenAPI 3.0 (6568896)
• marks deprecated properties from the specification as obsolete (26aba69)
• marks deprecated properties from the specification as obsolete (abc5301)
• schema: serialize compatibility examples from examples list (be57a7c)
• serialize examples as extension in v2/v3 (d27141b)

Commits viewable in compare view.

Updated MongoDB.Driver from 3.10.0 to 3.12.0.

Release notes

Sourced from MongoDB.Driver's releases.

3.12.0

This is the general availability release for the 3.12.0 version of the driver.

The main new features in 3.12.0 include:

• CSHARP-6214: Implement srvAllowedHostsSuffix URI option

Fixes:

• CSHARP-6223: Fix client-side projection crash on member-init projections

The full list of issues resolved in this release is available at CSHARP JIRA project.

Documentation on the .NET driver can be found here.

3.11.2

[!IMPORTANT]
This is a security patch release. It addresses two CVEs reported against the driver, along with a small number of related fixes. There are no public API changes and no application code changes are required to upgrade. Note that the shape of some queries generated by the LINQ provider and by GridFS has changed — see the individual tickets below.

This is a patch release that contains fixes and stability improvements:

• CSHARP-6177 / CVE-2026-88026: Query filter regex injection via unescaped backslash and bracket in LINQ character-set translation
• CSHARP-6190 / CVE-2026-88025: Use exact match for file ID in GridFS delete methods
• CSHARP-6213: Normalize SRV target host names to lower case during SRV polling

The full list of issues resolved in this release is available at CSHARP JIRA project.

Documentation on the .NET driver can be found here.

3.11.1

[!IMPORTANT]
This is a security patch release. It addresses a number of CVEs reported against the driver and does not include any functional changes or API modifications. Upgrading is recommended for all users; no code changes are required on the application side.

This is a patch release that contains fixes and stability improvements:

• CSHARP-6164 / CVE-2026-81530: KMS master key exposure via unredacted credential serialization in driver settings string
• CSHARP-6171 / CVE-2026-81529: Connection-option injection via unescaped settings in the canonical MongoDB URL builder
• CSHARP-6158 / CVE-2026-81528: NoSQL injection via array replacement bypassing update shape validation in driver write path
• CSHARP-6156 / CVE-2026-81527: NoSQL injection via unquoted constant GroupBy keys in LINQ pipeline translation
• CSHARP-6178 / CVE-2026-81527: NoSQL injection via equality-filter simplification of dollar-keyed documents in the LINQ provider
• CSHARP-6185 / CVE-2026-81527: NoSQL injection via unescaped dollar-prefixed values in LINQ constant arrays and documents

The full list of issues resolved in this release is available at CSHARP JIRA project.

Documentation on the .NET driver can be found here.

3.11.0

This is the general availability release for the 3.11.0 version of the driver.

The main new features in 3.11.0 include:

• CSHARP-6005: CSFLE/QE support for HTTP Proxies
• CSHARP-6089: Client Backpressure with baseBackoffMS

Fixes:

• CSHARP-6125: Reject non-collection inner sequences in LINQ Join/LeftJoin

The full list of issues resolved in this release is available at CSHARP JIRA project.

Documentation on the .NET driver can be found here.

Commits viewable in compare view.

Updated Moq from 4.20.72 to 4.21.0.

Release notes

Sourced from Moq's releases.

4.21.0

What's Changed

✨ Implemented enhancements

• Improve performance of It.Is matcher when used with an expression by compiling only once by @​peterder72 in Improve performance of It.Is matcher when used with an expression by compiling only once devlooped/moq#1512
• Updated ctor params to support nullable args by @​Asafima in Updated ctor params to support nullable args  devlooped/moq#1518
• Performance improvement for Mocking many large classes by @​crinksdr in Performance improvement for Mocking many large classes devlooped/moq#1530

🐛 Fixed bugs

• Minor enhancement to avoid null exceptions by @​ShirAvneri in Minor enhancement to avoid null exceptions devlooped/moq#1542
• Fix #​1648 reliably (lazy ValueTask registration + committed harness verification) by @​kzu in Fix #1648 reliably (lazy ValueTask registration + committed harness verification) devlooped/moq#1680

🔨 Other

• Updated IVerifies.Verifiable method documentation code example by @​Asafima in Updated IVerifies.Verifiable method documentation code example devlooped/moq#1528
• Bump dependencies by @​kzu in Bump dependencies devlooped/moq#1545
• Address build warnings by @​kzu in Address build warnings devlooped/moq#1546
• Enable nullable references in Moq.csproj by @​andrewimcclement in Enable nullable references in Moq.csproj devlooped/moq#1535
• Bump NuGetizer to 1.4.9 by @​kzu with @​Copilot in Bump NuGetizer to 1.4.9 devlooped/moq#1684

New Contributors

• @​peterder72 made their first contribution in Improve performance of It.Is matcher when used with an expression by compiling only once devlooped/moq#1512
• @​Asafima made their first contribution in Updated ctor params to support nullable args  devlooped/moq#1518
• @​crinksdr made their first contribution in Performance improvement for Mocking many large classes devlooped/moq#1530
• @​ShirAvneri made their first contribution in Minor enhancement to avoid null exceptions devlooped/moq#1542
• @​andrewimcclement made their first contribution in Enable nullable references in Moq.csproj devlooped/moq#1535
• @​kzu with @​Copilot made their first contribution in Bump NuGetizer to 1.4.9 devlooped/moq#1684

Full Changelog: devlooped/moq@v4.20.72...v4.21.0

Sponsors

The following sponsors made this release possible: @​clarius, @​MFB-Technologies-Inc, @​sandrock, @​drivenet, @​Keflon, @​tbolon, @​rbnswartz, @​jfoshee, @​Mrxx99, @​eajhnsn1, @​Jonathan-Hickey, @​KenBonny, @​SimonCropp, @​agileworks-eu, @​arsdragonfly, @​vezel-dev, @​ChilliCream, @​4OTC, @​DominicSchell, @​adalon, @​torutek, @​mccaffers, @​SeikaLogiciel, @​wizardness, @​eska-gmbh, @​geodata-no.

Thanks 💜

Commits viewable in compare view.

Updated OpenTelemetry.Exporter.OpenTelemetryProtocol from 1.17.0 to 1.19.1.

Release notes

Sourced from OpenTelemetry.Exporter.OpenTelemetryProtocol's releases.

1.19.1

For highlights and announcements pertaining to this release see: Release Notes > 1.19.1.

The following changes are from the previous release 1.19.0.

• NuGet: OpenTelemetry v1.19.1

  • Fixed NotSupportedException thrown when building a TracerProvider or MeterProvider with a large number of wildcard source/meter patterns on net8.0, and a related OutOfMemoryException that could occur when many such providers were built over the lifetime of a process.
    (#​7788)

  See CHANGELOG for details.

• NuGet: OpenTelemetry.Api v1.19.1

  No notable changes.

  See CHANGELOG for details.

• NuGet: OpenTelemetry.Api.ProviderBuilderExtensions v1.19.1

  No notable changes.

  See CHANGELOG for details.

• NuGet: OpenTelemetry.Exporter.Console v1.19.1

  No notable changes.

  See CHANGELOG for details.

• NuGet: OpenTelemetry.Exporter.InMemory v1.19.1

  No notable changes.

  See CHANGELOG for details.

• NuGet: OpenTelemetry.Exporter.OpenTelemetryProtocol v1.19.1

  No notable changes.

  See CHANGELOG for details.

• NuGet: OpenTelemetry.Exporter.Zipkin v1.19.1

  No notable changes.

  See CHANGELOG for details.

• NuGet: OpenTelemetry.Extensions.Hosting v1.19.1

  No notable changes.
  ... (truncated)

1.19.1-rc.1

The following changes are from the previous release 1.19.0.

• NuGet: OpenTelemetry v1.19.1-rc.1

  • Fixed NotSupportedException thrown when building a TracerProvider or MeterProvider with a large number of wildcard source/meter patterns on net8.0, and a related OutOfMemoryException that could occur when many such providers were built over the lifetime of a process.
    (#​7788)

  See CHANGELOG for details.

• NuGet: OpenTelemetry.Api v1.19.1-rc.1

  No notable changes.

  See CHANGELOG for details.

• NuGet: OpenTelemetry.Api.ProviderBuilderExtensions v1.19.1-rc.1

  No notable changes.

  See CHANGELOG for details.

• NuGet: OpenTelemetry.Exporter.Console v1.19.1-rc.1

  No notable changes.

  See CHANGELOG for details.

• NuGet: OpenTelemetry.Exporter.InMemory v1.19.1-rc.1

  No notable changes.

  See CHANGELOG for details.

• NuGet: OpenTelemetry.Exporter.OpenTelemetryProtocol v1.19.1-rc.1

  No notable changes.

  See CHANGELOG for details.

• NuGet: OpenTelemetry.Exporter.Zipkin v1.19.1-rc.1

  No notable changes.

  See CHANGELOG for details.

• NuGet: OpenTelemetry.Extensions.Hosting v1.19.1-rc.1

  No notable changes.

  See CHANGELOG for details.
  ... (truncated)

1.19.1-beta.1

The following changes are from the previous release 1.19.0-beta.1.

• NuGet: OpenTelemetry.Exporter.Prometheus.AspNetCore v1.19.1-beta.1

  • Updated OpenTelemetry core component version(s) to 1.19.1.
    (#​7796)

  See CHANGELOG for details.

• NuGet: OpenTelemetry.Exporter.Prometheus.HttpListener v1.19.1-beta.1

  • Updated OpenTelemetry core component version(s) to 1.19.1.
    (#​7796)

  See CHANGELOG for details.

• NuGet: OpenTelemetry.Shims.OpenTracing v1.19.1-beta.1

  • Updated OpenTelemetry core component version(s) to 1.19.1.
    (#​7796)

  See CHANGELOG for details.

1.19.0

For highlights and announcements pertaining to this release see: Release Notes > 1.19.0.

The following changes are from the previous release 1.18.0.

• NuGet: OpenTelemetry v1.19.0

  • Added Schema URL to internally created Resource instances.
    (#​7726)

  • Reduced allocations when formatting self-diagnostics events with up to three parameters.
    (#​7730)

  • Added AlwaysRecordSampler.
    (#​7695)

  • Fixed CircularBufferBuckets so the first delta histogram insertion after a reset does not result in an unnecessary scale reduction.
    (#​7749)

  • Improved wildcard source/meter name matching to avoid excessive matching time at runtime.
    (#​7760)

  • Fixed lazy logger provider builds after a failure from reusing partially initialized provider state.
    (#​7761)

  See CHANGELOG for details.

• NuGet: OpenTelemetry.Api v1.19.0

  • Reduced allocations when creating log record attributes from an array.
    (#​7699)

  • Reduced allocations when setting baggage through the params overload.
    (#​7697)

  • Reduced allocations when constructing SpanAttributes from an array.
    (#​7698)

  • Fixed parsing of an inbound tracestate header whose member value trimmed to an empty value that previously threw an IndexOutOfRangeException internally and could silently truncate the tracestate.
    (#​7756)

  See CHANGELOG for details.

• NuGet: OpenTelemetry.Api.ProviderBuilderExtensions v1.19.0

  No notable changes.

  See CHANGELOG for details.

• NuGet: OpenTelemetry.Exporter.Console v1.19.0

... (truncated)

1.19.0-rc.1

The following changes are from the previous release 1.18.0.

• NuGet: OpenTelemetry v1.19.0-rc.1

  • Added Schema URL to internally created Resource instances.
    (#​7726)

  • Reduced allocations when formatting self-diagnostics events with up to three parameters.
    (#​7730)

  • Added AlwaysRecordSampler.
    (#​7695)

  • Fixed CircularBufferBuckets so the first delta histogram insertion after a reset does not result in an unnecessary scale reduction.
    (#​7749)

  • Improved wildcard source/meter name matching to avoid excessive matching time at runtime.
    (#​7760)

  • Fixed lazy logger provider builds after a failure from reusing partially initialized provider state.
    (#​7761)

  See CHANGELOG for details.

• NuGet: OpenTelemetry.Api v1.19.0-rc.1

  • Reduced allocations when creating log record attributes from an array.
    (#​7699)

  • Reduced allocations when setting baggage through the params overload.
    (#​7697)

  • Reduced allocations when constructing SpanAttributes from an array.
    (#​7698)

  • Fixed parsing of an inbound tracestate header whose member value trimmed to an empty value that previously threw an IndexOutOfRangeException internally and could silently truncate the tracestate.
    (#​7756)

  See CHANGELOG for details.

• NuGet: OpenTelemetry.Api.ProviderBuilderExtensions v1.19.0-rc.1

  No notable changes.

  See CHANGELOG for details.

• NuGet: OpenTelemetry.Exporter.Console v1.19.0-rc.1

  • Extended key/value list attribute handling to cover additional dictionary shapes (IEnumerable<KeyValuePair<string, string?>> and IDictionary). These attributes will be serialized as JSON objects.
    (#​7679)
    ... (truncated)

1.19.0-beta.1

The following changes are from the previous release 1.18.0-beta.1.

• NuGet: OpenTelemetry.Exporter.Prometheus.AspNetCore v1.19.0-beta.1

  • Breaking Change The PrometheusTranslationStrategy enum was renamed to PrometheusAspNetCoreTranslationStrategy.
    (#​7751)

  • Fixed OpenMetrics _created series being emitted for metric points with a default start time.
    (#​7754)

  • Prometheus text/OpenMetrics escaping of label values, label names and help text is now more efficient.
    (#​7758)

  • A scrape request whose connection is aborted, or whose X-Prometheus-Scrape-Timeout-Seconds deadline elapses, now stops waiting for an in-progress metrics collection instead of continuing to wait for it to finish. The collection itself is not cancelled and continues running in the background.
    (#​7757)

  • Updated OpenTelemetry core component version(s) to 1.19.0.
    (#​7785)

  See CHANGELOG for details.

• NuGet: OpenTelemetry.Exporter.Prometheus.HttpListener v1.19.0-beta.1

  • Breaking Change The PrometheusTranslationStrategy enum was renamed to PrometheusHttpListenerTranslationStrategy.
    (#​7751)

  • Fixed OpenMetrics _created series being emitted for metric points with a default start time.
    (#​7754)

  • Prometheus text/OpenMetrics escaping of label values, label names and help text is now more efficient.
    (#​7758)

  • Added PrometheusHttpListenerOptions.ScrapeResponseTimeoutMilliseconds (default 60000) which bounds how long a scrape request waits for its response. X-Prometheus-Scrape-Timeout-Seconds request header values may only shorten this limit. The limit bounds the request's wait only: a metrics collection already running when it is reached is not cancelled and continues running in the background.
    (#​7757)

  • Updated OpenTelemetry core component version(s) to 1.19.0.
    (#​7785)

  See CHANGELOG for details.

• NuGet: OpenTelemetry.Shims.OpenTracing v1.19.0-beta.1

  • Updated OpenTelemetry core component version(s) to 1.19.0.
    (#​7785)

  See CHANGELOG for details.

1.18.0

For highlights and announcements pertaining to this release see: Release Notes > 1.18.0.

The following changes are from the previous release 1.17.0.

• NuGet: OpenTelemetry v1.18.0

  • Fixed self-diagnostics log lines being silently dropped when an event message or parameter contained enough 3-byte UTF-8 characters to overflow the internal buffer estimate. Such content is now truncated.
    (#​7543)

  • Fixed activity creation throwing when multiple tracer providers return a sampler attribute with the same key.
    (#​7558)

  • Added the otel.sdk.processor.log.processed SDK self-observability metric.
    (#​7486)

  • Added the otel.sdk.processor.span.processed SDK self-observability metric.
    (#​7598)

  • BatchActivityExportProcessor and SimpleActivityExportProcessor no longer forward spans to the exporter once Shutdown has been called, and BatchActivityExportProcessor.Shutdown now waits for in-flight OnEnd calls to finish enqueueing before flushing.
    ([#​7598](https://github.com/open-telem......

Description has been truncated

[dependabot]

Superseded by #934.