XBee: Use named arguments for cluster commands

tests/test_xbee.py

@@ -269,7 +269,7 @@ async def test_receive_serial_data(zigpy_device_from_quirk):
             None,
             b"2\x00\x02\x01\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe%V",
             b"\x01%V\x00\x0C\xE4",
-            "%v_command_response",
+            "percentv_command_response",
             3300,
         ),
         # Write uint16_t argument
@@ -278,7 +278,7 @@ async def test_receive_serial_data(zigpy_device_from_quirk):
             2700,
             b"2\x00\x02\x01\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfeV+\x0A\x8C",
             b"\x01V+\x00",
-            "v+_command_response",
+            "vplus_command_response",
             None,
         ),
         # Read uint8_t argument
@@ -319,7 +319,7 @@ async def test_receive_serial_data(zigpy_device_from_quirk):
         ),
         # Command with no arguments
         (
-            94,
+            93,
             None,
             b"2\x00\x02\x01\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfeAS",
             b"\x01AS\x00",
@@ -417,7 +417,7 @@ def mock_at_response(*args, **kwargs):
         # Write bool argument
         (31, "PM", True, None),
         # Command with no arguments
-        (94, "AS", None, None),
+        (93, "AS", None, None),
     ),
 )
 async def test_remote_at_native(
@@ -457,7 +457,9 @@ async def test_remote_at_native(
             )
         assert status == foundation.Status.SUCCESS
         listener.zha_send_event.assert_called_once_with(
-            command.lower() + "_command_response", {"response": response_value}
+            command.replace("%V", "PercentV").replace("V+", "VPlus").lower()
+            + "_command_response",
+            {"response": response_value},
         )
 
 

xbee.md

@@ -1,3 +1,34 @@
+This document describes how to use Digi XBee device as a router or end device.
+
+## Using with non-XBee coordinator
+
+You may need to configure zigpy to listen to the appropriate additional endpoints which it ignores by default. This is an example config for HA ZHA:
+
+```
+zha:
+  zigpy_config:
+    additional_endpoints:
+      - endpoint: 0xE6
+        profile: 0xC105
+        device_type: 0x0000
+        device_version: 0b0000
+        input_clusters: [0xA1]
+        output_clusters: [0x21]
+      - endpoint: 0xE8
+        profile: 0xC105
+        device_type: 0x0000
+        device_version: 0b0000
+        input_clusters: [0x11, 0x92]
+        output_clusters: [0x11]
+```
+If you are using `zigpy_znp`, you might also need need to add
+```
+    znp_config:
+      prefer_endpoint_1: false
+```
+to the `zigpy_config:` section.
+Please note that not all coordinators have been tested yet.
+
 ## Digital GPIO
 
 Digital input/output pins are exposed as switches.
@@ -58,7 +89,8 @@ automation:
         cluster_type: in
         command: 0
         command_type: server
-        args: Assistant
+        params:
+          data: Assistant
 ```
 
 ## Remote AT Commands
@@ -98,4 +130,5 @@ automation:
         command_type: server
         cluster_type: out
         cluster_id: 33
+        params: {}
 ```

zhaquirks/__init__.py

@@ -120,7 +120,7 @@ def handle_cluster_request(
         ):
             self.listener_event(
                 ZHA_SEND_EVENT,
-                self.server_commands.get(hdr.command_id, (hdr.command_id))[0],
+                self.server_commands.get(hdr.command_id, (hdr.command_id)).name,
                 args,
             )