Update cputime.c #169

dautovri · 2015-03-16T17:34:50Z

spelling mistake

Revert "Quick fix so that driver retrieves addresses from device tree…

ERROR: do not initialise globals to NULL torvalds#168: FILE: security/integrity/ima/ima_template.c:188: +void *kexec_buffer = NULL; ERROR: do not initialise globals to 0 torvalds#169: FILE: security/integrity/ima/ima_template.c:189: +size_t kexec_buffer_size = 0; ERROR: do not initialise globals to 0 torvalds#172: FILE: security/integrity/ima/ima_template.c:192: +unsigned long kexec_buffer_load_addr = 0; total: 3 errors, 0 warnings, 196 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. ./patches/ima-demonstration-code-for-kexec-buffer-passing.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Thiago Jung Bauermann <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

@bdev

I got this with syzkaller: general protection fault: 0000 [#1] PREEMPT SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) CPU: 0 PID: 11941 Comm: syz-executor Not tainted 4.8.0-rc2+ torvalds#169 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 task: ffff880110762cc0 task.stack: ffff880102290000 RIP: 0010:[<ffffffff81f04b7a>] [<ffffffff81f04b7a>] blk_get_backing_dev_info+0x4a/0x70 RSP: 0018:ffff880102297cd0 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffc90000bb4000 RDX: 0000000000000097 RSI: 0000000000000000 RDI: 00000000000004b8 RBP: ffff880102297cd8 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000001 R12: ffff88011a010a90 R13: ffff88011a594568 R14: ffff88011a010890 R15: 7fffffffffffffff FS: 00007f2445174700(0000) GS:ffff88011aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000200047c8 CR3: 0000000107eb5000 CR4: 00000000000006f0 DR0: 000000000000001e DR1: 000000000000001e DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600 Stack: 1ffff10020452f9e ffff880102297db8 ffffffff81508daa 0000000000000000 0000000041b58ab3 ffffffff844e89e1 ffffffff81508b30 ffffed0020452001 7fffffffffffffff 0000000000000000 0000000000000000 7fffffffffffffff Call Trace: [<ffffffff81508daa>] __filemap_fdatawrite_range+0x27a/0x2e0 [<ffffffff81508b30>] ? filemap_check_errors+0xe0/0xe0 [<ffffffff83c24b47>] ? preempt_schedule+0x27/0x30 [<ffffffff810020ae>] ? ___preempt_schedule+0x16/0x18 [<ffffffff81508e36>] filemap_fdatawrite+0x26/0x30 [<ffffffff817191b0>] fdatawrite_one_bdev+0x50/0x70 [<ffffffff817341b4>] iterate_bdevs+0x194/0x210 [<ffffffff81719160>] ? fdatawait_one_bdev+0x70/0x70 [<ffffffff817195f0>] ? sync_filesystem+0x240/0x240 [<ffffffff817196be>] sys_sync+0xce/0x160 [<ffffffff817195f0>] ? sync_filesystem+0x240/0x240 [<ffffffff81002b60>] ? exit_to_usermode_loop+0x190/0x190 [<ffffffff8150455a>] ? __context_tracking_exit.part.4+0x3a/0x1e0 [<ffffffff81005524>] do_syscall_64+0x1c4/0x4e0 [<ffffffff83c3276a>] entry_SYSCALL64_slow_path+0x25/0x25 Code: 89 fa 48 c1 ea 03 80 3c 02 00 75 35 48 8b 9b e0 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 8d bb b8 04 00 00 48 89 fa 48 c1 ea 03 <80> 3c 02 00 75 17 48 8b 83 b8 04 00 00 5b 5d 48 05 10 02 00 00 RIP [<ffffffff81f04b7a>] blk_get_backing_dev_info+0x4a/0x70 RSP <ffff880102297cd0> The problem is that sync() calls down to blk_get_backing_dev_info() without necessarily having the block device opened (if it races with another process doing close()): /** * blk_get_backing_dev_info - get the address of a queue's backing_dev_info * @bdev: device * * Locates the passed device's request queue and returns the address of its * backing_dev_info. This function can only be called if @bdev is opened <---- * and the return value is never NULL. */ struct backing_dev_info *blk_get_backing_dev_info(struct block_device *bdev) { struct request_queue *q = bdev_get_queue(bdev); return &q->backing_dev_info; } bdev_get_queue() crashes on dereferencing bdev->bd_disk->queue because ->bd_disk was set to NULL when close() reached __blkdev_put(). Taking bdev->bd_mutex and checking bdev->bd_disk actually seems to be a reliable test of whether it's safe to call filemap_fdatawrite() for the block device inode and completely fixes the crash for me. What I don't like about this patch is that it simply skips block devices which we don't have any open file descriptors for. That seems wrong to me because sync() should do writeback on (and wait for) _all_ devices, not just the ones that we happen to have an open file descriptor for. Imagine if we opened a device, wrote a lot of data to it, closed it, called sync(), and sync() returns. Now we should be guaranteed the data was written, but I'm not sure we are in this case. But maybe I've misunderstood how the writeback mechanism works. Another ugly thing is that we're now holding a new mutex over a potentially big chunk of code (everything that happens inside filemap_fdatawrite()). The only thing I can say is that it seems to work here. I have a reproducer that reliably triggers the problem in ~2 seconds so I can easily test other proposed fixes if there are any. I would also be happy to submit a new patch with some guidance on the Right Way to fix this. Cc: [email protected] Signed-off-by: Vegard Nossum <[email protected]>

ERROR: do not initialise globals to NULL torvalds#168: FILE: security/integrity/ima/ima_template.c:188: +void *kexec_buffer = NULL; ERROR: do not initialise globals to 0 torvalds#169: FILE: security/integrity/ima/ima_template.c:189: +size_t kexec_buffer_size = 0; ERROR: do not initialise globals to 0 torvalds#172: FILE: security/integrity/ima/ima_template.c:192: +unsigned long kexec_buffer_load_addr = 0; total: 3 errors, 0 warnings, 196 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. ./patches/ima-demonstration-code-for-kexec-buffer-passing.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Thiago Jung Bauermann <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

I got this with syzkaller: ================================================================== BUG: KASAN: null-ptr-deref on address 0000000000000020 Read of size 32 by task syz-executor/22519 CPU: 1 PID: 22519 Comm: syz-executor Not tainted 4.8.0-rc2+ torvalds#169 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2 014 0000000000000001 ffff880111a17a00 ffffffff81f9f141 ffff880111a17a90 ffff880111a17c50 ffff880114584a58 ffff880114584a10 ffff880111a17a80 ffffffff8161fe3f ffff880100000000 ffff880118d74a48 ffff880118d74a68 Call Trace: [<ffffffff81f9f141>] dump_stack+0x83/0xb2 [<ffffffff8161fe3f>] kasan_report_error+0x41f/0x4c0 [<ffffffff8161ff74>] kasan_report+0x34/0x40 [<ffffffff82c84b54>] ? snd_timer_user_read+0x554/0x790 [<ffffffff8161e79e>] check_memory_region+0x13e/0x1a0 [<ffffffff8161e9c1>] kasan_check_read+0x11/0x20 [<ffffffff82c84b54>] snd_timer_user_read+0x554/0x790 [<ffffffff82c84600>] ? snd_timer_user_info_compat.isra.5+0x2b0/0x2b0 [<ffffffff817d0831>] ? proc_fault_inject_write+0x1c1/0x250 [<ffffffff817d0670>] ? next_tgid+0x2a0/0x2a0 [<ffffffff8127c278>] ? do_group_exit+0x108/0x330 [<ffffffff8174653a>] ? fsnotify+0x72a/0xca0 [<ffffffff81674dfe>] __vfs_read+0x10e/0x550 [<ffffffff82c84600>] ? snd_timer_user_info_compat.isra.5+0x2b0/0x2b0 [<ffffffff81674cf0>] ? do_sendfile+0xc50/0xc50 [<ffffffff81745e10>] ? __fsnotify_update_child_dentry_flags+0x60/0x60 [<ffffffff8143fec6>] ? kcov_ioctl+0x56/0x190 [<ffffffff81e5ada2>] ? common_file_perm+0x2e2/0x380 [<ffffffff81746b0e>] ? __fsnotify_parent+0x5e/0x2b0 [<ffffffff81d93536>] ? security_file_permission+0x86/0x1e0 [<ffffffff816728f5>] ? rw_verify_area+0xe5/0x2b0 [<ffffffff81675355>] vfs_read+0x115/0x330 [<ffffffff81676371>] SyS_read+0xd1/0x1a0 [<ffffffff816762a0>] ? vfs_write+0x4b0/0x4b0 [<ffffffff82001c2c>] ? __this_cpu_preempt_check+0x1c/0x20 [<ffffffff8150455a>] ? __context_tracking_exit.part.4+0x3a/0x1e0 [<ffffffff816762a0>] ? vfs_write+0x4b0/0x4b0 [<ffffffff81005524>] do_syscall_64+0x1c4/0x4e0 [<ffffffff810052fc>] ? syscall_return_slowpath+0x16c/0x1d0 [<ffffffff83c3276a>] entry_SYSCALL64_slow_path+0x25/0x25 ================================================================== There are a couple of problems that I can see: - ioctl(SNDRV_TIMER_IOCTL_SELECT), which potentially sets tu->queue/tu->tqueue to NULL on memory allocation failure, so read() would get a NULL pointer dereference like the above splat - the same ioctl() can free tu->queue/to->tqueue which means read() could potentially see (and dereference) the freed pointer We can fix the NULL pointer dereference by not touching the pointers until we have allocated the new memory (similar to what is done in ioctl(SNDRV_TIMER_IOCTL_PARAMS)) and we can fix the use-after-free by taking the ioctl_lock mutex when dereferencing ->queue/->tqueue, since that's always held over all the ioctl() code. Just looking at the code I find it likely that there are more problems here such as tu->qhead pointing outside the buffer if the size is changed concurrently using SNDRV_TIMER_IOCTL_PARAMS. Signed-off-by: Vegard Nossum <[email protected]>

I got this with syzkaller: ================================================================== BUG: KASAN: null-ptr-deref on address 0000000000000020 Read of size 32 by task syz-executor/22519 CPU: 1 PID: 22519 Comm: syz-executor Not tainted 4.8.0-rc2+ torvalds#169 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2 014 0000000000000001 ffff880111a17a00 ffffffff81f9f141 ffff880111a17a90 ffff880111a17c50 ffff880114584a58 ffff880114584a10 ffff880111a17a80 ffffffff8161fe3f ffff880100000000 ffff880118d74a48 ffff880118d74a68 Call Trace: [<ffffffff81f9f141>] dump_stack+0x83/0xb2 [<ffffffff8161fe3f>] kasan_report_error+0x41f/0x4c0 [<ffffffff8161ff74>] kasan_report+0x34/0x40 [<ffffffff82c84b54>] ? snd_timer_user_read+0x554/0x790 [<ffffffff8161e79e>] check_memory_region+0x13e/0x1a0 [<ffffffff8161e9c1>] kasan_check_read+0x11/0x20 [<ffffffff82c84b54>] snd_timer_user_read+0x554/0x790 [<ffffffff82c84600>] ? snd_timer_user_info_compat.isra.5+0x2b0/0x2b0 [<ffffffff817d0831>] ? proc_fault_inject_write+0x1c1/0x250 [<ffffffff817d0670>] ? next_tgid+0x2a0/0x2a0 [<ffffffff8127c278>] ? do_group_exit+0x108/0x330 [<ffffffff8174653a>] ? fsnotify+0x72a/0xca0 [<ffffffff81674dfe>] __vfs_read+0x10e/0x550 [<ffffffff82c84600>] ? snd_timer_user_info_compat.isra.5+0x2b0/0x2b0 [<ffffffff81674cf0>] ? do_sendfile+0xc50/0xc50 [<ffffffff81745e10>] ? __fsnotify_update_child_dentry_flags+0x60/0x60 [<ffffffff8143fec6>] ? kcov_ioctl+0x56/0x190 [<ffffffff81e5ada2>] ? common_file_perm+0x2e2/0x380 [<ffffffff81746b0e>] ? __fsnotify_parent+0x5e/0x2b0 [<ffffffff81d93536>] ? security_file_permission+0x86/0x1e0 [<ffffffff816728f5>] ? rw_verify_area+0xe5/0x2b0 [<ffffffff81675355>] vfs_read+0x115/0x330 [<ffffffff81676371>] SyS_read+0xd1/0x1a0 [<ffffffff816762a0>] ? vfs_write+0x4b0/0x4b0 [<ffffffff82001c2c>] ? __this_cpu_preempt_check+0x1c/0x20 [<ffffffff8150455a>] ? __context_tracking_exit.part.4+0x3a/0x1e0 [<ffffffff816762a0>] ? vfs_write+0x4b0/0x4b0 [<ffffffff81005524>] do_syscall_64+0x1c4/0x4e0 [<ffffffff810052fc>] ? syscall_return_slowpath+0x16c/0x1d0 [<ffffffff83c3276a>] entry_SYSCALL64_slow_path+0x25/0x25 ================================================================== There are a couple of problems that I can see: - ioctl(SNDRV_TIMER_IOCTL_SELECT), which potentially sets tu->queue/tu->tqueue to NULL on memory allocation failure, so read() would get a NULL pointer dereference like the above splat - the same ioctl() can free tu->queue/to->tqueue which means read() could potentially see (and dereference) the freed pointer We can fix both by taking the ioctl_lock mutex when dereferencing ->queue/->tqueue, since that's always held over all the ioctl() code. Just looking at the code I find it likely that there are more problems here such as tu->qhead pointing outside the buffer if the size is changed concurrently using SNDRV_TIMER_IOCTL_PARAMS. Signed-off-by: Vegard Nossum <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>

commit 11749e0 upstream. I got this with syzkaller: ================================================================== BUG: KASAN: null-ptr-deref on address 0000000000000020 Read of size 32 by task syz-executor/22519 CPU: 1 PID: 22519 Comm: syz-executor Not tainted 4.8.0-rc2+ torvalds#169 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2 014 0000000000000001 ffff880111a17a00 ffffffff81f9f141 ffff880111a17a90 ffff880111a17c50 ffff880114584a58 ffff880114584a10 ffff880111a17a80 ffffffff8161fe3f ffff880100000000 ffff880118d74a48 ffff880118d74a68 Call Trace: [<ffffffff81f9f141>] dump_stack+0x83/0xb2 [<ffffffff8161fe3f>] kasan_report_error+0x41f/0x4c0 [<ffffffff8161ff74>] kasan_report+0x34/0x40 [<ffffffff82c84b54>] ? snd_timer_user_read+0x554/0x790 [<ffffffff8161e79e>] check_memory_region+0x13e/0x1a0 [<ffffffff8161e9c1>] kasan_check_read+0x11/0x20 [<ffffffff82c84b54>] snd_timer_user_read+0x554/0x790 [<ffffffff82c84600>] ? snd_timer_user_info_compat.isra.5+0x2b0/0x2b0 [<ffffffff817d0831>] ? proc_fault_inject_write+0x1c1/0x250 [<ffffffff817d0670>] ? next_tgid+0x2a0/0x2a0 [<ffffffff8127c278>] ? do_group_exit+0x108/0x330 [<ffffffff8174653a>] ? fsnotify+0x72a/0xca0 [<ffffffff81674dfe>] __vfs_read+0x10e/0x550 [<ffffffff82c84600>] ? snd_timer_user_info_compat.isra.5+0x2b0/0x2b0 [<ffffffff81674cf0>] ? do_sendfile+0xc50/0xc50 [<ffffffff81745e10>] ? __fsnotify_update_child_dentry_flags+0x60/0x60 [<ffffffff8143fec6>] ? kcov_ioctl+0x56/0x190 [<ffffffff81e5ada2>] ? common_file_perm+0x2e2/0x380 [<ffffffff81746b0e>] ? __fsnotify_parent+0x5e/0x2b0 [<ffffffff81d93536>] ? security_file_permission+0x86/0x1e0 [<ffffffff816728f5>] ? rw_verify_area+0xe5/0x2b0 [<ffffffff81675355>] vfs_read+0x115/0x330 [<ffffffff81676371>] SyS_read+0xd1/0x1a0 [<ffffffff816762a0>] ? vfs_write+0x4b0/0x4b0 [<ffffffff82001c2c>] ? __this_cpu_preempt_check+0x1c/0x20 [<ffffffff8150455a>] ? __context_tracking_exit.part.4+0x3a/0x1e0 [<ffffffff816762a0>] ? vfs_write+0x4b0/0x4b0 [<ffffffff81005524>] do_syscall_64+0x1c4/0x4e0 [<ffffffff810052fc>] ? syscall_return_slowpath+0x16c/0x1d0 [<ffffffff83c3276a>] entry_SYSCALL64_slow_path+0x25/0x25 ================================================================== There are a couple of problems that I can see: - ioctl(SNDRV_TIMER_IOCTL_SELECT), which potentially sets tu->queue/tu->tqueue to NULL on memory allocation failure, so read() would get a NULL pointer dereference like the above splat - the same ioctl() can free tu->queue/to->tqueue which means read() could potentially see (and dereference) the freed pointer We can fix both by taking the ioctl_lock mutex when dereferencing ->queue/->tqueue, since that's always held over all the ioctl() code. Just looking at the code I find it likely that there are more problems here such as tu->qhead pointing outside the buffer if the size is changed concurrently using SNDRV_TIMER_IOCTL_PARAMS. Signed-off-by: Vegard Nossum <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 11749e0 upstream. I got this with syzkaller: ================================================================== BUG: KASAN: null-ptr-deref on address 0000000000000020 Read of size 32 by task syz-executor/22519 CPU: 1 PID: 22519 Comm: syz-executor Not tainted 4.8.0-rc2+ #169 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2 014 0000000000000001 ffff880111a17a00 ffffffff81f9f141 ffff880111a17a90 ffff880111a17c50 ffff880114584a58 ffff880114584a10 ffff880111a17a80 ffffffff8161fe3f ffff880100000000 ffff880118d74a48 ffff880118d74a68 Call Trace: [<ffffffff81f9f141>] dump_stack+0x83/0xb2 [<ffffffff8161fe3f>] kasan_report_error+0x41f/0x4c0 [<ffffffff8161ff74>] kasan_report+0x34/0x40 [<ffffffff82c84b54>] ? snd_timer_user_read+0x554/0x790 [<ffffffff8161e79e>] check_memory_region+0x13e/0x1a0 [<ffffffff8161e9c1>] kasan_check_read+0x11/0x20 [<ffffffff82c84b54>] snd_timer_user_read+0x554/0x790 [<ffffffff82c84600>] ? snd_timer_user_info_compat.isra.5+0x2b0/0x2b0 [<ffffffff817d0831>] ? proc_fault_inject_write+0x1c1/0x250 [<ffffffff817d0670>] ? next_tgid+0x2a0/0x2a0 [<ffffffff8127c278>] ? do_group_exit+0x108/0x330 [<ffffffff8174653a>] ? fsnotify+0x72a/0xca0 [<ffffffff81674dfe>] __vfs_read+0x10e/0x550 [<ffffffff82c84600>] ? snd_timer_user_info_compat.isra.5+0x2b0/0x2b0 [<ffffffff81674cf0>] ? do_sendfile+0xc50/0xc50 [<ffffffff81745e10>] ? __fsnotify_update_child_dentry_flags+0x60/0x60 [<ffffffff8143fec6>] ? kcov_ioctl+0x56/0x190 [<ffffffff81e5ada2>] ? common_file_perm+0x2e2/0x380 [<ffffffff81746b0e>] ? __fsnotify_parent+0x5e/0x2b0 [<ffffffff81d93536>] ? security_file_permission+0x86/0x1e0 [<ffffffff816728f5>] ? rw_verify_area+0xe5/0x2b0 [<ffffffff81675355>] vfs_read+0x115/0x330 [<ffffffff81676371>] SyS_read+0xd1/0x1a0 [<ffffffff816762a0>] ? vfs_write+0x4b0/0x4b0 [<ffffffff82001c2c>] ? __this_cpu_preempt_check+0x1c/0x20 [<ffffffff8150455a>] ? __context_tracking_exit.part.4+0x3a/0x1e0 [<ffffffff816762a0>] ? vfs_write+0x4b0/0x4b0 [<ffffffff81005524>] do_syscall_64+0x1c4/0x4e0 [<ffffffff810052fc>] ? syscall_return_slowpath+0x16c/0x1d0 [<ffffffff83c3276a>] entry_SYSCALL64_slow_path+0x25/0x25 ================================================================== There are a couple of problems that I can see: - ioctl(SNDRV_TIMER_IOCTL_SELECT), which potentially sets tu->queue/tu->tqueue to NULL on memory allocation failure, so read() would get a NULL pointer dereference like the above splat - the same ioctl() can free tu->queue/to->tqueue which means read() could potentially see (and dereference) the freed pointer We can fix both by taking the ioctl_lock mutex when dereferencing ->queue/->tqueue, since that's always held over all the ioctl() code. Just looking at the code I find it likely that there are more problems here such as tu->qhead pointing outside the buffer if the size is changed concurrently using SNDRV_TIMER_IOCTL_PARAMS. Signed-off-by: Vegard Nossum <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 11749e0 upstream. I got this with syzkaller: ================================================================== BUG: KASAN: null-ptr-deref on address 0000000000000020 Read of size 32 by task syz-executor/22519 CPU: 1 PID: 22519 Comm: syz-executor Not tainted 4.8.0-rc2+ torvalds#169 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2 014 0000000000000001 ffff880111a17a00 ffffffff81f9f141 ffff880111a17a90 ffff880111a17c50 ffff880114584a58 ffff880114584a10 ffff880111a17a80 ffffffff8161fe3f ffff880100000000 ffff880118d74a48 ffff880118d74a68 Call Trace: [<ffffffff81f9f141>] dump_stack+0x83/0xb2 [<ffffffff8161fe3f>] kasan_report_error+0x41f/0x4c0 [<ffffffff8161ff74>] kasan_report+0x34/0x40 [<ffffffff82c84b54>] ? snd_timer_user_read+0x554/0x790 [<ffffffff8161e79e>] check_memory_region+0x13e/0x1a0 [<ffffffff8161e9c1>] kasan_check_read+0x11/0x20 [<ffffffff82c84b54>] snd_timer_user_read+0x554/0x790 [<ffffffff82c84600>] ? snd_timer_user_info_compat.isra.5+0x2b0/0x2b0 [<ffffffff817d0831>] ? proc_fault_inject_write+0x1c1/0x250 [<ffffffff817d0670>] ? next_tgid+0x2a0/0x2a0 [<ffffffff8127c278>] ? do_group_exit+0x108/0x330 [<ffffffff8174653a>] ? fsnotify+0x72a/0xca0 [<ffffffff81674dfe>] __vfs_read+0x10e/0x550 [<ffffffff82c84600>] ? snd_timer_user_info_compat.isra.5+0x2b0/0x2b0 [<ffffffff81674cf0>] ? do_sendfile+0xc50/0xc50 [<ffffffff81745e10>] ? __fsnotify_update_child_dentry_flags+0x60/0x60 [<ffffffff8143fec6>] ? kcov_ioctl+0x56/0x190 [<ffffffff81e5ada2>] ? common_file_perm+0x2e2/0x380 [<ffffffff81746b0e>] ? __fsnotify_parent+0x5e/0x2b0 [<ffffffff81d93536>] ? security_file_permission+0x86/0x1e0 [<ffffffff816728f5>] ? rw_verify_area+0xe5/0x2b0 [<ffffffff81675355>] vfs_read+0x115/0x330 [<ffffffff81676371>] SyS_read+0xd1/0x1a0 [<ffffffff816762a0>] ? vfs_write+0x4b0/0x4b0 [<ffffffff82001c2c>] ? __this_cpu_preempt_check+0x1c/0x20 [<ffffffff8150455a>] ? __context_tracking_exit.part.4+0x3a/0x1e0 [<ffffffff816762a0>] ? vfs_write+0x4b0/0x4b0 [<ffffffff81005524>] do_syscall_64+0x1c4/0x4e0 [<ffffffff810052fc>] ? syscall_return_slowpath+0x16c/0x1d0 [<ffffffff83c3276a>] entry_SYSCALL64_slow_path+0x25/0x25 ================================================================== There are a couple of problems that I can see: - ioctl(SNDRV_TIMER_IOCTL_SELECT), which potentially sets tu->queue/tu->tqueue to NULL on memory allocation failure, so read() would get a NULL pointer dereference like the above splat - the same ioctl() can free tu->queue/to->tqueue which means read() could potentially see (and dereference) the freed pointer We can fix both by taking the ioctl_lock mutex when dereferencing ->queue/->tqueue, since that's always held over all the ioctl() code. Just looking at the code I find it likely that there are more problems here such as tu->qhead pointing outside the buffer if the size is changed concurrently using SNDRV_TIMER_IOCTL_PARAMS. [js] unlock in fail paths Signed-off-by: Vegard Nossum <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Jiri Slaby <[email protected]>

[ Upstream commit 11749e0 ] I got this with syzkaller: ================================================================== BUG: KASAN: null-ptr-deref on address 0000000000000020 Read of size 32 by task syz-executor/22519 CPU: 1 PID: 22519 Comm: syz-executor Not tainted 4.8.0-rc2+ torvalds#169 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2 014 0000000000000001 ffff880111a17a00 ffffffff81f9f141 ffff880111a17a90 ffff880111a17c50 ffff880114584a58 ffff880114584a10 ffff880111a17a80 ffffffff8161fe3f ffff880100000000 ffff880118d74a48 ffff880118d74a68 Call Trace: [<ffffffff81f9f141>] dump_stack+0x83/0xb2 [<ffffffff8161fe3f>] kasan_report_error+0x41f/0x4c0 [<ffffffff8161ff74>] kasan_report+0x34/0x40 [<ffffffff82c84b54>] ? snd_timer_user_read+0x554/0x790 [<ffffffff8161e79e>] check_memory_region+0x13e/0x1a0 [<ffffffff8161e9c1>] kasan_check_read+0x11/0x20 [<ffffffff82c84b54>] snd_timer_user_read+0x554/0x790 [<ffffffff82c84600>] ? snd_timer_user_info_compat.isra.5+0x2b0/0x2b0 [<ffffffff817d0831>] ? proc_fault_inject_write+0x1c1/0x250 [<ffffffff817d0670>] ? next_tgid+0x2a0/0x2a0 [<ffffffff8127c278>] ? do_group_exit+0x108/0x330 [<ffffffff8174653a>] ? fsnotify+0x72a/0xca0 [<ffffffff81674dfe>] __vfs_read+0x10e/0x550 [<ffffffff82c84600>] ? snd_timer_user_info_compat.isra.5+0x2b0/0x2b0 [<ffffffff81674cf0>] ? do_sendfile+0xc50/0xc50 [<ffffffff81745e10>] ? __fsnotify_update_child_dentry_flags+0x60/0x60 [<ffffffff8143fec6>] ? kcov_ioctl+0x56/0x190 [<ffffffff81e5ada2>] ? common_file_perm+0x2e2/0x380 [<ffffffff81746b0e>] ? __fsnotify_parent+0x5e/0x2b0 [<ffffffff81d93536>] ? security_file_permission+0x86/0x1e0 [<ffffffff816728f5>] ? rw_verify_area+0xe5/0x2b0 [<ffffffff81675355>] vfs_read+0x115/0x330 [<ffffffff81676371>] SyS_read+0xd1/0x1a0 [<ffffffff816762a0>] ? vfs_write+0x4b0/0x4b0 [<ffffffff82001c2c>] ? __this_cpu_preempt_check+0x1c/0x20 [<ffffffff8150455a>] ? __context_tracking_exit.part.4+0x3a/0x1e0 [<ffffffff816762a0>] ? vfs_write+0x4b0/0x4b0 [<ffffffff81005524>] do_syscall_64+0x1c4/0x4e0 [<ffffffff810052fc>] ? syscall_return_slowpath+0x16c/0x1d0 [<ffffffff83c3276a>] entry_SYSCALL64_slow_path+0x25/0x25 ================================================================== There are a couple of problems that I can see: - ioctl(SNDRV_TIMER_IOCTL_SELECT), which potentially sets tu->queue/tu->tqueue to NULL on memory allocation failure, so read() would get a NULL pointer dereference like the above splat - the same ioctl() can free tu->queue/to->tqueue which means read() could potentially see (and dereference) the freed pointer We can fix both by taking the ioctl_lock mutex when dereferencing ->queue/->tqueue, since that's always held over all the ioctl() code. Just looking at the code I find it likely that there are more problems here such as tu->qhead pointing outside the buffer if the size is changed concurrently using SNDRV_TIMER_IOCTL_PARAMS. Signed-off-by: Vegard Nossum <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

BugLink: http://bugs.launchpad.net/bugs/1624037 commit 11749e0 upstream. I got this with syzkaller: ================================================================== BUG: KASAN: null-ptr-deref on address 0000000000000020 Read of size 32 by task syz-executor/22519 CPU: 1 PID: 22519 Comm: syz-executor Not tainted 4.8.0-rc2+ torvalds#169 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2 014 0000000000000001 ffff880111a17a00 ffffffff81f9f141 ffff880111a17a90 ffff880111a17c50 ffff880114584a58 ffff880114584a10 ffff880111a17a80 ffffffff8161fe3f ffff880100000000 ffff880118d74a48 ffff880118d74a68 Call Trace: [<ffffffff81f9f141>] dump_stack+0x83/0xb2 [<ffffffff8161fe3f>] kasan_report_error+0x41f/0x4c0 [<ffffffff8161ff74>] kasan_report+0x34/0x40 [<ffffffff82c84b54>] ? snd_timer_user_read+0x554/0x790 [<ffffffff8161e79e>] check_memory_region+0x13e/0x1a0 [<ffffffff8161e9c1>] kasan_check_read+0x11/0x20 [<ffffffff82c84b54>] snd_timer_user_read+0x554/0x790 [<ffffffff82c84600>] ? snd_timer_user_info_compat.isra.5+0x2b0/0x2b0 [<ffffffff817d0831>] ? proc_fault_inject_write+0x1c1/0x250 [<ffffffff817d0670>] ? next_tgid+0x2a0/0x2a0 [<ffffffff8127c278>] ? do_group_exit+0x108/0x330 [<ffffffff8174653a>] ? fsnotify+0x72a/0xca0 [<ffffffff81674dfe>] __vfs_read+0x10e/0x550 [<ffffffff82c84600>] ? snd_timer_user_info_compat.isra.5+0x2b0/0x2b0 [<ffffffff81674cf0>] ? do_sendfile+0xc50/0xc50 [<ffffffff81745e10>] ? __fsnotify_update_child_dentry_flags+0x60/0x60 [<ffffffff8143fec6>] ? kcov_ioctl+0x56/0x190 [<ffffffff81e5ada2>] ? common_file_perm+0x2e2/0x380 [<ffffffff81746b0e>] ? __fsnotify_parent+0x5e/0x2b0 [<ffffffff81d93536>] ? security_file_permission+0x86/0x1e0 [<ffffffff816728f5>] ? rw_verify_area+0xe5/0x2b0 [<ffffffff81675355>] vfs_read+0x115/0x330 [<ffffffff81676371>] SyS_read+0xd1/0x1a0 [<ffffffff816762a0>] ? vfs_write+0x4b0/0x4b0 [<ffffffff82001c2c>] ? __this_cpu_preempt_check+0x1c/0x20 [<ffffffff8150455a>] ? __context_tracking_exit.part.4+0x3a/0x1e0 [<ffffffff816762a0>] ? vfs_write+0x4b0/0x4b0 [<ffffffff81005524>] do_syscall_64+0x1c4/0x4e0 [<ffffffff810052fc>] ? syscall_return_slowpath+0x16c/0x1d0 [<ffffffff83c3276a>] entry_SYSCALL64_slow_path+0x25/0x25 ================================================================== There are a couple of problems that I can see: - ioctl(SNDRV_TIMER_IOCTL_SELECT), which potentially sets tu->queue/tu->tqueue to NULL on memory allocation failure, so read() would get a NULL pointer dereference like the above splat - the same ioctl() can free tu->queue/to->tqueue which means read() could potentially see (and dereference) the freed pointer We can fix both by taking the ioctl_lock mutex when dereferencing ->queue/->tqueue, since that's always held over all the ioctl() code. Just looking at the code I find it likely that there are more problems here such as tu->qhead pointing outside the buffer if the size is changed concurrently using SNDRV_TIMER_IOCTL_PARAMS. Signed-off-by: Vegard Nossum <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Tim Gardner <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]>

commit 11749e0 upstream. I got this with syzkaller: ================================================================== BUG: KASAN: null-ptr-deref on address 0000000000000020 Read of size 32 by task syz-executor/22519 CPU: 1 PID: 22519 Comm: syz-executor Not tainted 4.8.0-rc2+ torvalds#169 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2 014 0000000000000001 ffff880111a17a00 ffffffff81f9f141 ffff880111a17a90 ffff880111a17c50 ffff880114584a58 ffff880114584a10 ffff880111a17a80 ffffffff8161fe3f ffff880100000000 ffff880118d74a48 ffff880118d74a68 Call Trace: [<ffffffff81f9f141>] dump_stack+0x83/0xb2 [<ffffffff8161fe3f>] kasan_report_error+0x41f/0x4c0 [<ffffffff8161ff74>] kasan_report+0x34/0x40 [<ffffffff82c84b54>] ? snd_timer_user_read+0x554/0x790 [<ffffffff8161e79e>] check_memory_region+0x13e/0x1a0 [<ffffffff8161e9c1>] kasan_check_read+0x11/0x20 [<ffffffff82c84b54>] snd_timer_user_read+0x554/0x790 [<ffffffff82c84600>] ? snd_timer_user_info_compat.isra.5+0x2b0/0x2b0 [<ffffffff817d0831>] ? proc_fault_inject_write+0x1c1/0x250 [<ffffffff817d0670>] ? next_tgid+0x2a0/0x2a0 [<ffffffff8127c278>] ? do_group_exit+0x108/0x330 [<ffffffff8174653a>] ? fsnotify+0x72a/0xca0 [<ffffffff81674dfe>] __vfs_read+0x10e/0x550 [<ffffffff82c84600>] ? snd_timer_user_info_compat.isra.5+0x2b0/0x2b0 [<ffffffff81674cf0>] ? do_sendfile+0xc50/0xc50 [<ffffffff81745e10>] ? __fsnotify_update_child_dentry_flags+0x60/0x60 [<ffffffff8143fec6>] ? kcov_ioctl+0x56/0x190 [<ffffffff81e5ada2>] ? common_file_perm+0x2e2/0x380 [<ffffffff81746b0e>] ? __fsnotify_parent+0x5e/0x2b0 [<ffffffff81d93536>] ? security_file_permission+0x86/0x1e0 [<ffffffff816728f5>] ? rw_verify_area+0xe5/0x2b0 [<ffffffff81675355>] vfs_read+0x115/0x330 [<ffffffff81676371>] SyS_read+0xd1/0x1a0 [<ffffffff816762a0>] ? vfs_write+0x4b0/0x4b0 [<ffffffff82001c2c>] ? __this_cpu_preempt_check+0x1c/0x20 [<ffffffff8150455a>] ? __context_tracking_exit.part.4+0x3a/0x1e0 [<ffffffff816762a0>] ? vfs_write+0x4b0/0x4b0 [<ffffffff81005524>] do_syscall_64+0x1c4/0x4e0 [<ffffffff810052fc>] ? syscall_return_slowpath+0x16c/0x1d0 [<ffffffff83c3276a>] entry_SYSCALL64_slow_path+0x25/0x25 ================================================================== There are a couple of problems that I can see: - ioctl(SNDRV_TIMER_IOCTL_SELECT), which potentially sets tu->queue/tu->tqueue to NULL on memory allocation failure, so read() would get a NULL pointer dereference like the above splat - the same ioctl() can free tu->queue/to->tqueue which means read() could potentially see (and dereference) the freed pointer We can fix both by taking the ioctl_lock mutex when dereferencing ->queue/->tqueue, since that's always held over all the ioctl() code. Just looking at the code I find it likely that there are more problems here such as tu->qhead pointing outside the buffer if the size is changed concurrently using SNDRV_TIMER_IOCTL_PARAMS. Signed-off-by: Vegard Nossum <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Ben Hutchings <[email protected]>

commit 11749e0 upstream. I got this with syzkaller: ================================================================== BUG: KASAN: null-ptr-deref on address 0000000000000020 Read of size 32 by task syz-executor/22519 CPU: 1 PID: 22519 Comm: syz-executor Not tainted 4.8.0-rc2+ torvalds#169 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2 014 0000000000000001 ffff880111a17a00 ffffffff81f9f141 ffff880111a17a90 ffff880111a17c50 ffff880114584a58 ffff880114584a10 ffff880111a17a80 ffffffff8161fe3f ffff880100000000 ffff880118d74a48 ffff880118d74a68 Call Trace: [<ffffffff81f9f141>] dump_stack+0x83/0xb2 [<ffffffff8161fe3f>] kasan_report_error+0x41f/0x4c0 [<ffffffff8161ff74>] kasan_report+0x34/0x40 [<ffffffff82c84b54>] ? snd_timer_user_read+0x554/0x790 [<ffffffff8161e79e>] check_memory_region+0x13e/0x1a0 [<ffffffff8161e9c1>] kasan_check_read+0x11/0x20 [<ffffffff82c84b54>] snd_timer_user_read+0x554/0x790 [<ffffffff82c84600>] ? snd_timer_user_info_compat.isra.5+0x2b0/0x2b0 [<ffffffff817d0831>] ? proc_fault_inject_write+0x1c1/0x250 [<ffffffff817d0670>] ? next_tgid+0x2a0/0x2a0 [<ffffffff8127c278>] ? do_group_exit+0x108/0x330 [<ffffffff8174653a>] ? fsnotify+0x72a/0xca0 [<ffffffff81674dfe>] __vfs_read+0x10e/0x550 [<ffffffff82c84600>] ? snd_timer_user_info_compat.isra.5+0x2b0/0x2b0 [<ffffffff81674cf0>] ? do_sendfile+0xc50/0xc50 [<ffffffff81745e10>] ? __fsnotify_update_child_dentry_flags+0x60/0x60 [<ffffffff8143fec6>] ? kcov_ioctl+0x56/0x190 [<ffffffff81e5ada2>] ? common_file_perm+0x2e2/0x380 [<ffffffff81746b0e>] ? __fsnotify_parent+0x5e/0x2b0 [<ffffffff81d93536>] ? security_file_permission+0x86/0x1e0 [<ffffffff816728f5>] ? rw_verify_area+0xe5/0x2b0 [<ffffffff81675355>] vfs_read+0x115/0x330 [<ffffffff81676371>] SyS_read+0xd1/0x1a0 [<ffffffff816762a0>] ? vfs_write+0x4b0/0x4b0 [<ffffffff82001c2c>] ? __this_cpu_preempt_check+0x1c/0x20 [<ffffffff8150455a>] ? __context_tracking_exit.part.4+0x3a/0x1e0 [<ffffffff816762a0>] ? vfs_write+0x4b0/0x4b0 [<ffffffff81005524>] do_syscall_64+0x1c4/0x4e0 [<ffffffff810052fc>] ? syscall_return_slowpath+0x16c/0x1d0 [<ffffffff83c3276a>] entry_SYSCALL64_slow_path+0x25/0x25 ================================================================== There are a couple of problems that I can see: - ioctl(SNDRV_TIMER_IOCTL_SELECT), which potentially sets tu->queue/tu->tqueue to NULL on memory allocation failure, so read() would get a NULL pointer dereference like the above splat - the same ioctl() can free tu->queue/to->tqueue which means read() could potentially see (and dereference) the freed pointer We can fix both by taking the ioctl_lock mutex when dereferencing ->queue/->tqueue, since that's always held over all the ioctl() code. Just looking at the code I find it likely that there are more problems here such as tu->qhead pointing outside the buffer if the size is changed concurrently using SNDRV_TIMER_IOCTL_PARAMS. [js] unlock in fail paths Signed-off-by: Vegard Nossum <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Jiri Slaby <[email protected]> Signed-off-by: Willy Tarreau <[email protected]>

The starting address of the hid descriptor is obtained via usb_get_extra_descriptor(). If the hid descriptor has the wrong size, it is possible to access the wrong address. So, before accessing the hid descriptor, we need to check the entire size through the bLength field. It also shows how many class descriptors it has through the bNumDescriptors of the hid descriptor. Assuming that the connected hid descriptor has two class descriptors(report and physical descriptors), the code below can cause OOB because hdesc->desc is an array of size 1. for (n = 0; n < hdesc->bNumDescriptors; n++) if (hdesc->desc[n].bDescriptorType == HID_DT_REPORT) rsize = le16_to_cpu(hdesc->desc[n].wDescriptorLength); Since we know the starting address of the hid descriptor and the value of the bNumDescriptors is variable, we directly access the buffer containing the hid descriptor without usbing hdesc->desc to obtain the size of the report descriptor. ================================================================== BUG: KASAN: slab-out-of-bounds in usbhid_parse+0x9b1/0xa20 Read of size 1 at addr ffff88006c5f8edf by task kworker/1:2/1261 CPU: 1 PID: 1261 Comm: kworker/1:2 Not tainted 4.14.0-rc1-42251-gebb2c2437d80 torvalds#169 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:16 dump_stack+0x292/0x395 lib/dump_stack.c:52 print_address_description+0x78/0x280 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 kasan_report+0x22f/0x340 mm/kasan/report.c:409 __asan_report_load1_noabort+0x19/0x20 mm/kasan/report.c:427 usbhid_parse+0x9b1/0xa20 drivers/hid/usbhid/hid-core.c:1004 hid_add_device+0x16b/0xb30 drivers/hid/hid-core.c:2944 usbhid_probe+0xc28/0x1100 drivers/hid/usbhid/hid-core.c:1369 usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_set_configuration+0x104e/0x1870 drivers/usb/core/message.c:1932 generic_probe+0x73/0xe0 drivers/usb/core/generic.c:174 usb_probe_device+0xaf/0xe0 drivers/usb/core/driver.c:266 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_new_device+0x7b8/0x1020 drivers/usb/core/hub.c:2457 hub_port_connect drivers/usb/core/hub.c:4903 hub_port_connect_change drivers/usb/core/hub.c:5009 port_event drivers/usb/core/hub.c:5115 hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195 process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119 worker_thread+0x221/0x1850 kernel/workqueue.c:2253 kthread+0x3a1/0x470 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431 Allocated by task 1261: save_stack_trace+0x1b/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:551 __kmalloc+0x14e/0x310 mm/slub.c:3782 kmalloc ./include/linux/slab.h:498 usb_get_configuration+0x372/0x2a60 drivers/usb/core/config.c:848 usb_enumerate_device drivers/usb/core/hub.c:2290 usb_new_device+0xaae/0x1020 drivers/usb/core/hub.c:2426 hub_port_connect drivers/usb/core/hub.c:4903 hub_port_connect_change drivers/usb/core/hub.c:5009 port_event drivers/usb/core/hub.c:5115 hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195 process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119 worker_thread+0x221/0x1850 kernel/workqueue.c:2253 kthread+0x3a1/0x470 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431 Freed by task 2927: save_stack_trace+0x1b/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 kasan_slab_free+0x72/0xc0 mm/kasan/kasan.c:524 slab_free_hook mm/slub.c:1390 slab_free_freelist_hook mm/slub.c:1412 slab_free mm/slub.c:2988 kfree+0xf6/0x2f0 mm/slub.c:3919 free_rb_tree_fname+0x8a/0xe0 fs/ext4/dir.c:402 ext4_htree_free_dir_info fs/ext4/dir.c:424 ext4_release_dir+0x49/0x70 fs/ext4/dir.c:622 __fput+0x33e/0x800 fs/file_table.c:210 ____fput+0x1a/0x20 fs/file_table.c:244 task_work_run+0x1af/0x280 kernel/task_work.c:112 tracehook_notify_resume ./include/linux/tracehook.h:191 exit_to_usermode_loop+0x1e1/0x220 arch/x86/entry/common.c:162 prepare_exit_to_usermode arch/x86/entry/common.c:197 syscall_return_slowpath+0x414/0x480 arch/x86/entry/common.c:266 entry_SYSCALL_64_fastpath+0xc0/0xc2 arch/x86/entry/entry_64.S:238 The buggy address belongs to the object at ffff88006c5f8ea0 which belongs to the cache kmalloc-64 of size 64 The buggy address is located 63 bytes inside of 64-byte region [ffff88006c5f8ea0, ffff88006c5f8ee0) The buggy address belongs to the page: page:ffffea0001b17e00 count:1 mapcount:0 mapping: (null) index:0x0 flags: 0x100000000000100(slab) raw: 0100000000000100 0000000000000000 0000000000000000 00000001002a002a raw: ffffea0001a83000 0000001500000015 ffff88006c403800 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88006c5f8d80: fb fb fb fb fb fb fb fb fc fc fc fc 00 00 00 00 ffff88006c5f8e00: 00 fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb >ffff88006c5f8e80: fc fc fc fc 00 00 00 00 00 00 00 07 fc fc fc fc ^ ffff88006c5f8f00: fb fb fb fb fb fb fb fb fc fc fc fc fb fb fb fb ffff88006c5f8f80: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Reported-by: Alexander Potapenko <[email protected]> Signed-off-by: Jaejoong Kim <[email protected]>

The hid descriptor identifies the length and type of subordinate descriptors for a device. If the received hid descriptor is smaller than the size of the struct hid_descriptor, it is possible to cause out-of-bounds. In addition, if bNumDescriptors of the hid descriptor have an incorrect value, this can also cause out-of-bounds while approaching hdesc->desc[n]. So check the size of hid descriptor and bNumDescriptors. BUG: KASAN: slab-out-of-bounds in usbhid_parse+0x9b1/0xa20 Read of size 1 at addr ffff88006c5f8edf by task kworker/1:2/1261 CPU: 1 PID: 1261 Comm: kworker/1:2 Not tainted 4.14.0-rc1-42251-gebb2c2437d80 torvalds#169 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:16 dump_stack+0x292/0x395 lib/dump_stack.c:52 print_address_description+0x78/0x280 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 kasan_report+0x22f/0x340 mm/kasan/report.c:409 __asan_report_load1_noabort+0x19/0x20 mm/kasan/report.c:427 usbhid_parse+0x9b1/0xa20 drivers/hid/usbhid/hid-core.c:1004 hid_add_device+0x16b/0xb30 drivers/hid/hid-core.c:2944 usbhid_probe+0xc28/0x1100 drivers/hid/usbhid/hid-core.c:1369 usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_set_configuration+0x104e/0x1870 drivers/usb/core/message.c:1932 generic_probe+0x73/0xe0 drivers/usb/core/generic.c:174 usb_probe_device+0xaf/0xe0 drivers/usb/core/driver.c:266 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_new_device+0x7b8/0x1020 drivers/usb/core/hub.c:2457 hub_port_connect drivers/usb/core/hub.c:4903 hub_port_connect_change drivers/usb/core/hub.c:5009 port_event drivers/usb/core/hub.c:5115 hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195 process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119 worker_thread+0x221/0x1850 kernel/workqueue.c:2253 kthread+0x3a1/0x470 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431 Cc: [email protected] Reported-by: Andrey Konovalov <[email protected]> Signed-off-by: Jaejoong Kim <[email protected]> Tested-by: Andrey Konovalov <[email protected]> Acked-by: Alan Stern <[email protected]> Signed-off-by: Jiri Kosina <[email protected]>

The hid descriptor identifies the length and type of subordinate descriptors for a device. If the received hid descriptor is smaller than the size of the struct hid_descriptor, it is possible to cause out-of-bounds. In addition, if bNumDescriptors of the hid descriptor have an incorrect value, this can also cause out-of-bounds while approaching hdesc->desc[n]. So check the size of hid descriptor and bNumDescriptors. BUG: KASAN: slab-out-of-bounds in usbhid_parse+0x9b1/0xa20 Read of size 1 at addr ffff88006c5f8edf by task kworker/1:2/1261 CPU: 1 PID: 1261 Comm: kworker/1:2 Not tainted 4.14.0-rc1-42251-gebb2c2437d80 torvalds#169 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:16 dump_stack+0x292/0x395 lib/dump_stack.c:52 print_address_description+0x78/0x280 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 kasan_report+0x22f/0x340 mm/kasan/report.c:409 __asan_report_load1_noabort+0x19/0x20 mm/kasan/report.c:427 usbhid_parse+0x9b1/0xa20 drivers/hid/usbhid/hid-core.c:1004 hid_add_device+0x16b/0xb30 drivers/hid/hid-core.c:2944 usbhid_probe+0xc28/0x1100 drivers/hid/usbhid/hid-core.c:1369 usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_set_configuration+0x104e/0x1870 drivers/usb/core/message.c:1932 generic_probe+0x73/0xe0 drivers/usb/core/generic.c:174 usb_probe_device+0xaf/0xe0 drivers/usb/core/driver.c:266 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_new_device+0x7b8/0x1020 drivers/usb/core/hub.c:2457 hub_port_connect drivers/usb/core/hub.c:4903 hub_port_connect_change drivers/usb/core/hub.c:5009 port_event drivers/usb/core/hub.c:5115 hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195 process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119 worker_thread+0x221/0x1850 kernel/workqueue.c:2253 kthread+0x3a1/0x470 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431 Reported-by: Andrey Konovalov <[email protected]> Signed-off-by: Jaejoong Kim <[email protected]> Tested-by: Andrey Konovalov <[email protected]> Acked-by: Alan Stern <[email protected]> Signed-off-by: Jiri Kosina <[email protected]>

commit f043bfc upstream. The hid descriptor identifies the length and type of subordinate descriptors for a device. If the received hid descriptor is smaller than the size of the struct hid_descriptor, it is possible to cause out-of-bounds. In addition, if bNumDescriptors of the hid descriptor have an incorrect value, this can also cause out-of-bounds while approaching hdesc->desc[n]. So check the size of hid descriptor and bNumDescriptors. BUG: KASAN: slab-out-of-bounds in usbhid_parse+0x9b1/0xa20 Read of size 1 at addr ffff88006c5f8edf by task kworker/1:2/1261 CPU: 1 PID: 1261 Comm: kworker/1:2 Not tainted 4.14.0-rc1-42251-gebb2c2437d80 torvalds#169 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:16 dump_stack+0x292/0x395 lib/dump_stack.c:52 print_address_description+0x78/0x280 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 kasan_report+0x22f/0x340 mm/kasan/report.c:409 __asan_report_load1_noabort+0x19/0x20 mm/kasan/report.c:427 usbhid_parse+0x9b1/0xa20 drivers/hid/usbhid/hid-core.c:1004 hid_add_device+0x16b/0xb30 drivers/hid/hid-core.c:2944 usbhid_probe+0xc28/0x1100 drivers/hid/usbhid/hid-core.c:1369 usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_set_configuration+0x104e/0x1870 drivers/usb/core/message.c:1932 generic_probe+0x73/0xe0 drivers/usb/core/generic.c:174 usb_probe_device+0xaf/0xe0 drivers/usb/core/driver.c:266 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_new_device+0x7b8/0x1020 drivers/usb/core/hub.c:2457 hub_port_connect drivers/usb/core/hub.c:4903 hub_port_connect_change drivers/usb/core/hub.c:5009 port_event drivers/usb/core/hub.c:5115 hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195 process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119 worker_thread+0x221/0x1850 kernel/workqueue.c:2253 kthread+0x3a1/0x470 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431 Reported-by: Andrey Konovalov <[email protected]> Signed-off-by: Jaejoong Kim <[email protected]> Tested-by: Andrey Konovalov <[email protected]> Acked-by: Alan Stern <[email protected]> Signed-off-by: Jiri Kosina <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit f043bfc upstream. The hid descriptor identifies the length and type of subordinate descriptors for a device. If the received hid descriptor is smaller than the size of the struct hid_descriptor, it is possible to cause out-of-bounds. In addition, if bNumDescriptors of the hid descriptor have an incorrect value, this can also cause out-of-bounds while approaching hdesc->desc[n]. So check the size of hid descriptor and bNumDescriptors. BUG: KASAN: slab-out-of-bounds in usbhid_parse+0x9b1/0xa20 Read of size 1 at addr ffff88006c5f8edf by task kworker/1:2/1261 CPU: 1 PID: 1261 Comm: kworker/1:2 Not tainted 4.14.0-rc1-42251-gebb2c2437d80 #169 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:16 dump_stack+0x292/0x395 lib/dump_stack.c:52 print_address_description+0x78/0x280 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 kasan_report+0x22f/0x340 mm/kasan/report.c:409 __asan_report_load1_noabort+0x19/0x20 mm/kasan/report.c:427 usbhid_parse+0x9b1/0xa20 drivers/hid/usbhid/hid-core.c:1004 hid_add_device+0x16b/0xb30 drivers/hid/hid-core.c:2944 usbhid_probe+0xc28/0x1100 drivers/hid/usbhid/hid-core.c:1369 usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_set_configuration+0x104e/0x1870 drivers/usb/core/message.c:1932 generic_probe+0x73/0xe0 drivers/usb/core/generic.c:174 usb_probe_device+0xaf/0xe0 drivers/usb/core/driver.c:266 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_new_device+0x7b8/0x1020 drivers/usb/core/hub.c:2457 hub_port_connect drivers/usb/core/hub.c:4903 hub_port_connect_change drivers/usb/core/hub.c:5009 port_event drivers/usb/core/hub.c:5115 hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195 process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119 worker_thread+0x221/0x1850 kernel/workqueue.c:2253 kthread+0x3a1/0x470 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431 Reported-by: Andrey Konovalov <[email protected]> Signed-off-by: Jaejoong Kim <[email protected]> Tested-by: Andrey Konovalov <[email protected]> Acked-by: Alan Stern <[email protected]> Signed-off-by: Jiri Kosina <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit f043bfc ] The hid descriptor identifies the length and type of subordinate descriptors for a device. If the received hid descriptor is smaller than the size of the struct hid_descriptor, it is possible to cause out-of-bounds. In addition, if bNumDescriptors of the hid descriptor have an incorrect value, this can also cause out-of-bounds while approaching hdesc->desc[n]. So check the size of hid descriptor and bNumDescriptors. BUG: KASAN: slab-out-of-bounds in usbhid_parse+0x9b1/0xa20 Read of size 1 at addr ffff88006c5f8edf by task kworker/1:2/1261 CPU: 1 PID: 1261 Comm: kworker/1:2 Not tainted 4.14.0-rc1-42251-gebb2c2437d80 torvalds#169 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:16 dump_stack+0x292/0x395 lib/dump_stack.c:52 print_address_description+0x78/0x280 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 kasan_report+0x22f/0x340 mm/kasan/report.c:409 __asan_report_load1_noabort+0x19/0x20 mm/kasan/report.c:427 usbhid_parse+0x9b1/0xa20 drivers/hid/usbhid/hid-core.c:1004 hid_add_device+0x16b/0xb30 drivers/hid/hid-core.c:2944 usbhid_probe+0xc28/0x1100 drivers/hid/usbhid/hid-core.c:1369 usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_set_configuration+0x104e/0x1870 drivers/usb/core/message.c:1932 generic_probe+0x73/0xe0 drivers/usb/core/generic.c:174 usb_probe_device+0xaf/0xe0 drivers/usb/core/driver.c:266 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_new_device+0x7b8/0x1020 drivers/usb/core/hub.c:2457 hub_port_connect drivers/usb/core/hub.c:4903 hub_port_connect_change drivers/usb/core/hub.c:5009 port_event drivers/usb/core/hub.c:5115 hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195 process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119 worker_thread+0x221/0x1850 kernel/workqueue.c:2253 kthread+0x3a1/0x470 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431 Cc: [email protected] Reported-by: Andrey Konovalov <[email protected]> Signed-off-by: Jaejoong Kim <[email protected]> Tested-by: Andrey Konovalov <[email protected]> Acked-by: Alan Stern <[email protected]> Signed-off-by: Jiri Kosina <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit f043bfc upstream. The hid descriptor identifies the length and type of subordinate descriptors for a device. If the received hid descriptor is smaller than the size of the struct hid_descriptor, it is possible to cause out-of-bounds. In addition, if bNumDescriptors of the hid descriptor have an incorrect value, this can also cause out-of-bounds while approaching hdesc->desc[n]. So check the size of hid descriptor and bNumDescriptors. BUG: KASAN: slab-out-of-bounds in usbhid_parse+0x9b1/0xa20 Read of size 1 at addr ffff88006c5f8edf by task kworker/1:2/1261 CPU: 1 PID: 1261 Comm: kworker/1:2 Not tainted 4.14.0-rc1-42251-gebb2c2437d80 torvalds#169 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:16 dump_stack+0x292/0x395 lib/dump_stack.c:52 print_address_description+0x78/0x280 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 kasan_report+0x22f/0x340 mm/kasan/report.c:409 __asan_report_load1_noabort+0x19/0x20 mm/kasan/report.c:427 usbhid_parse+0x9b1/0xa20 drivers/hid/usbhid/hid-core.c:1004 hid_add_device+0x16b/0xb30 drivers/hid/hid-core.c:2944 usbhid_probe+0xc28/0x1100 drivers/hid/usbhid/hid-core.c:1369 usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_set_configuration+0x104e/0x1870 drivers/usb/core/message.c:1932 generic_probe+0x73/0xe0 drivers/usb/core/generic.c:174 usb_probe_device+0xaf/0xe0 drivers/usb/core/driver.c:266 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_new_device+0x7b8/0x1020 drivers/usb/core/hub.c:2457 hub_port_connect drivers/usb/core/hub.c:4903 hub_port_connect_change drivers/usb/core/hub.c:5009 port_event drivers/usb/core/hub.c:5115 hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195 process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119 worker_thread+0x221/0x1850 kernel/workqueue.c:2253 kthread+0x3a1/0x470 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431 Reported-by: Andrey Konovalov <[email protected]> Signed-off-by: Jaejoong Kim <[email protected]> Tested-by: Andrey Konovalov <[email protected]> Acked-by: Alan Stern <[email protected]> Signed-off-by: Jiri Kosina <[email protected]> Signed-off-by: Ben Hutchings <[email protected]>

BugLink: http://bugs.launchpad.net/bugs/1724669 commit f043bfc upstream. The hid descriptor identifies the length and type of subordinate descriptors for a device. If the received hid descriptor is smaller than the size of the struct hid_descriptor, it is possible to cause out-of-bounds. In addition, if bNumDescriptors of the hid descriptor have an incorrect value, this can also cause out-of-bounds while approaching hdesc->desc[n]. So check the size of hid descriptor and bNumDescriptors. BUG: KASAN: slab-out-of-bounds in usbhid_parse+0x9b1/0xa20 Read of size 1 at addr ffff88006c5f8edf by task kworker/1:2/1261 CPU: 1 PID: 1261 Comm: kworker/1:2 Not tainted 4.14.0-rc1-42251-gebb2c2437d80 torvalds#169 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:16 dump_stack+0x292/0x395 lib/dump_stack.c:52 print_address_description+0x78/0x280 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 kasan_report+0x22f/0x340 mm/kasan/report.c:409 __asan_report_load1_noabort+0x19/0x20 mm/kasan/report.c:427 usbhid_parse+0x9b1/0xa20 drivers/hid/usbhid/hid-core.c:1004 hid_add_device+0x16b/0xb30 drivers/hid/hid-core.c:2944 usbhid_probe+0xc28/0x1100 drivers/hid/usbhid/hid-core.c:1369 usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_set_configuration+0x104e/0x1870 drivers/usb/core/message.c:1932 generic_probe+0x73/0xe0 drivers/usb/core/generic.c:174 usb_probe_device+0xaf/0xe0 drivers/usb/core/driver.c:266 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_new_device+0x7b8/0x1020 drivers/usb/core/hub.c:2457 hub_port_connect drivers/usb/core/hub.c:4903 hub_port_connect_change drivers/usb/core/hub.c:5009 port_event drivers/usb/core/hub.c:5115 hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195 process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119 worker_thread+0x221/0x1850 kernel/workqueue.c:2253 kthread+0x3a1/0x470 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431 Reported-by: Andrey Konovalov <[email protected]> Signed-off-by: Jaejoong Kim <[email protected]> Tested-by: Andrey Konovalov <[email protected]> Acked-by: Alan Stern <[email protected]> Signed-off-by: Jiri Kosina <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Seth Forshee <[email protected]>

WARNING: Prefer 'unsigned int' to bare use of 'unsigned' torvalds#49: FILE: fs/mpage.c:139: + unsigned nr_pages; WARNING: line over 80 characters torvalds#96: FILE: fs/mpage.c:190: + if (buffer_mapped(map_bh) && block_in_file > args->first_logical_block && WARNING: Prefer 'unsigned int' to bare use of 'unsigned' torvalds#98: FILE: fs/mpage.c:192: + unsigned map_offset = block_in_file - args->first_logical_block; WARNING: line over 80 characters torvalds#135: FILE: fs/mpage.c:296: + min_t(int, args->nr_pages, BIO_MAX_PAGES), args->gfp); ERROR: code indent should use tabs where possible torvalds#169: FILE: fs/mpage.c:321: +^I block_read_full_page(page, args->get_block);$ total: 1 errors, 4 warnings, 196 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. NOTE: Whitespace errors detected. You may wish to use scripts/cleanpatch or scripts/cleanfile ./patches/mpage-add-argument-structure-for-do_mpage_readpage.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Stephen Rothwell <[email protected]>

WARNING: Prefer 'unsigned int' to bare use of 'unsigned' torvalds#49: FILE: fs/mpage.c:139: + unsigned nr_pages; WARNING: line over 80 characters torvalds#96: FILE: fs/mpage.c:190: + if (buffer_mapped(map_bh) && block_in_file > args->first_logical_block && WARNING: Prefer 'unsigned int' to bare use of 'unsigned' torvalds#98: FILE: fs/mpage.c:192: + unsigned map_offset = block_in_file - args->first_logical_block; WARNING: line over 80 characters torvalds#135: FILE: fs/mpage.c:296: + min_t(int, args->nr_pages, BIO_MAX_PAGES), args->gfp); ERROR: code indent should use tabs where possible torvalds#169: FILE: fs/mpage.c:321: +^I block_read_full_page(page, args->get_block);$ total: 1 errors, 4 warnings, 196 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. NOTE: Whitespace errors detected. You may wish to use scripts/cleanpatch or scripts/cleanfile ./patches/mpage-add-argument-structure-for-do_mpage_readpage.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Signed-off-by: Andrew Morton <[email protected]>

commit 11749e0 upstream. I got this with syzkaller: ================================================================== BUG: KASAN: null-ptr-deref on address 0000000000000020 Read of size 32 by task syz-executor/22519 CPU: 1 PID: 22519 Comm: syz-executor Not tainted 4.8.0-rc2+ torvalds#169 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2 014 0000000000000001 ffff880111a17a00 ffffffff81f9f141 ffff880111a17a90 ffff880111a17c50 ffff880114584a58 ffff880114584a10 ffff880111a17a80 ffffffff8161fe3f ffff880100000000 ffff880118d74a48 ffff880118d74a68 Call Trace: [<ffffffff81f9f141>] dump_stack+0x83/0xb2 [<ffffffff8161fe3f>] kasan_report_error+0x41f/0x4c0 [<ffffffff8161ff74>] kasan_report+0x34/0x40 [<ffffffff82c84b54>] ? snd_timer_user_read+0x554/0x790 [<ffffffff8161e79e>] check_memory_region+0x13e/0x1a0 [<ffffffff8161e9c1>] kasan_check_read+0x11/0x20 [<ffffffff82c84b54>] snd_timer_user_read+0x554/0x790 [<ffffffff82c84600>] ? snd_timer_user_info_compat.isra.5+0x2b0/0x2b0 [<ffffffff817d0831>] ? proc_fault_inject_write+0x1c1/0x250 [<ffffffff817d0670>] ? next_tgid+0x2a0/0x2a0 [<ffffffff8127c278>] ? do_group_exit+0x108/0x330 [<ffffffff8174653a>] ? fsnotify+0x72a/0xca0 [<ffffffff81674dfe>] __vfs_read+0x10e/0x550 [<ffffffff82c84600>] ? snd_timer_user_info_compat.isra.5+0x2b0/0x2b0 [<ffffffff81674cf0>] ? do_sendfile+0xc50/0xc50 [<ffffffff81745e10>] ? __fsnotify_update_child_dentry_flags+0x60/0x60 [<ffffffff8143fec6>] ? kcov_ioctl+0x56/0x190 [<ffffffff81e5ada2>] ? common_file_perm+0x2e2/0x380 [<ffffffff81746b0e>] ? __fsnotify_parent+0x5e/0x2b0 [<ffffffff81d93536>] ? security_file_permission+0x86/0x1e0 [<ffffffff816728f5>] ? rw_verify_area+0xe5/0x2b0 [<ffffffff81675355>] vfs_read+0x115/0x330 [<ffffffff81676371>] SyS_read+0xd1/0x1a0 [<ffffffff816762a0>] ? vfs_write+0x4b0/0x4b0 [<ffffffff82001c2c>] ? __this_cpu_preempt_check+0x1c/0x20 [<ffffffff8150455a>] ? __context_tracking_exit.part.4+0x3a/0x1e0 [<ffffffff816762a0>] ? vfs_write+0x4b0/0x4b0 [<ffffffff81005524>] do_syscall_64+0x1c4/0x4e0 [<ffffffff810052fc>] ? syscall_return_slowpath+0x16c/0x1d0 [<ffffffff83c3276a>] entry_SYSCALL64_slow_path+0x25/0x25 ================================================================== There are a couple of problems that I can see: - ioctl(SNDRV_TIMER_IOCTL_SELECT), which potentially sets tu->queue/tu->tqueue to NULL on memory allocation failure, so read() would get a NULL pointer dereference like the above splat - the same ioctl() can free tu->queue/to->tqueue which means read() could potentially see (and dereference) the freed pointer We can fix both by taking the ioctl_lock mutex when dereferencing ->queue/->tqueue, since that's always held over all the ioctl() code. Just looking at the code I find it likely that there are more problems here such as tu->qhead pointing outside the buffer if the size is changed concurrently using SNDRV_TIMER_IOCTL_PARAMS. Signed-off-by: Vegard Nossum <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Lee Jones <[email protected]> Change-Id: I21480b714309af8f9bf0a59688e008ee2e9f7a2d

commit f043bfc upstream. The hid descriptor identifies the length and type of subordinate descriptors for a device. If the received hid descriptor is smaller than the size of the struct hid_descriptor, it is possible to cause out-of-bounds. In addition, if bNumDescriptors of the hid descriptor have an incorrect value, this can also cause out-of-bounds while approaching hdesc->desc[n]. So check the size of hid descriptor and bNumDescriptors. BUG: KASAN: slab-out-of-bounds in usbhid_parse+0x9b1/0xa20 Read of size 1 at addr ffff88006c5f8edf by task kworker/1:2/1261 CPU: 1 PID: 1261 Comm: kworker/1:2 Not tainted 4.14.0-rc1-42251-gebb2c2437d80 torvalds#169 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:16 dump_stack+0x292/0x395 lib/dump_stack.c:52 print_address_description+0x78/0x280 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 kasan_report+0x22f/0x340 mm/kasan/report.c:409 __asan_report_load1_noabort+0x19/0x20 mm/kasan/report.c:427 usbhid_parse+0x9b1/0xa20 drivers/hid/usbhid/hid-core.c:1004 hid_add_device+0x16b/0xb30 drivers/hid/hid-core.c:2944 usbhid_probe+0xc28/0x1100 drivers/hid/usbhid/hid-core.c:1369 usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_set_configuration+0x104e/0x1870 drivers/usb/core/message.c:1932 generic_probe+0x73/0xe0 drivers/usb/core/generic.c:174 usb_probe_device+0xaf/0xe0 drivers/usb/core/driver.c:266 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_new_device+0x7b8/0x1020 drivers/usb/core/hub.c:2457 hub_port_connect drivers/usb/core/hub.c:4903 hub_port_connect_change drivers/usb/core/hub.c:5009 port_event drivers/usb/core/hub.c:5115 hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195 process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119 worker_thread+0x221/0x1850 kernel/workqueue.c:2253 kthread+0x3a1/0x470 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431 Reported-by: Andrey Konovalov <[email protected]> Signed-off-by: Jaejoong Kim <[email protected]> Tested-by: Andrey Konovalov <[email protected]> Acked-by: Alan Stern <[email protected]> Signed-off-by: Jiri Kosina <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit dbb4cfe ] The interrupt handling should be related to the firmware version. If the driver matches an old firmware, then the driver should not handle interrupt such as i2c or dma, otherwise it will cause some errors. This log reveals it: [ 27.708641] INFO: trying to register non-static key. [ 27.710851] The code is fine but needs lockdep annotation, or maybe [ 27.712010] you didn't initialize this object before use? [ 27.712396] turning off the locking correctness validator. [ 27.712787] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.12.4-g70e7f0549188-dirty torvalds#169 [ 27.713349] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 27.714149] Call Trace: [ 27.714329] <IRQ> [ 27.714480] dump_stack+0xba/0xf5 [ 27.714737] register_lock_class+0x873/0x8f0 [ 27.715052] ? __lock_acquire+0x323/0x1930 [ 27.715353] __lock_acquire+0x75/0x1930 [ 27.715636] lock_acquire+0x1dd/0x3e0 [ 27.715905] ? netup_i2c_interrupt+0x19/0x310 [ 27.716226] _raw_spin_lock_irqsave+0x4b/0x60 [ 27.716544] ? netup_i2c_interrupt+0x19/0x310 [ 27.716863] netup_i2c_interrupt+0x19/0x310 [ 27.717178] netup_unidvb_isr+0xd3/0x160 [ 27.717467] __handle_irq_event_percpu+0x53/0x3e0 [ 27.717808] handle_irq_event_percpu+0x35/0x90 [ 27.718129] handle_irq_event+0x39/0x60 [ 27.718409] handle_fasteoi_irq+0xc2/0x1d0 [ 27.718707] __common_interrupt+0x7f/0x150 [ 27.719008] common_interrupt+0xb4/0xd0 [ 27.719289] </IRQ> [ 27.719446] asm_common_interrupt+0x1e/0x40 [ 27.719747] RIP: 0010:native_safe_halt+0x17/0x20 [ 27.720084] Code: 07 0f 00 2d 8b ee 4c 00 f4 5d c3 0f 1f 84 00 00 00 00 00 8b 05 72 95 17 02 55 48 89 e5 85 c0 7e 07 0f 00 2d 6b ee 4c 00 fb f4 <5d> c3 cc cc cc cc cc cc cc 55 48 89 e5 e8 67 53 ff ff 8b 0d 29 f6 [ 27.721386] RSP: 0018:ffffc9000008fe90 EFLAGS: 00000246 [ 27.721758] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 [ 27.722262] RDX: 0000000000000000 RSI: ffffffff85f7c054 RDI: ffffffff85ded4e6 [ 27.722770] RBP: ffffc9000008fe90 R08: 0000000000000001 R09: 0000000000000001 [ 27.723277] R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff86a75408 [ 27.723781] R13: 0000000000000000 R14: 0000000000000000 R15: ffff888100260000 [ 27.724289] default_idle+0x9/0x10 [ 27.724537] arch_cpu_idle+0xa/0x10 [ 27.724791] default_idle_call+0x6e/0x250 [ 27.725082] do_idle+0x1f0/0x2d0 [ 27.725326] cpu_startup_entry+0x18/0x20 [ 27.725613] start_secondary+0x11f/0x160 [ 27.725902] secondary_startup_64_no_verify+0xb0/0xbb [ 27.726272] BUG: kernel NULL pointer dereference, address: 0000000000000002 [ 27.726768] #PF: supervisor read access in kernel mode [ 27.727138] #PF: error_code(0x0000) - not-present page [ 27.727507] PGD 8000000118688067 P4D 8000000118688067 PUD 10feab067 PMD 0 [ 27.727999] Oops: 0000 [#1] PREEMPT SMP PTI [ 27.728302] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.12.4-g70e7f0549188-dirty torvalds#169 [ 27.728861] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 27.729660] RIP: 0010:netup_i2c_interrupt+0x23/0x310 [ 27.730019] Code: 0f 1f 80 00 00 00 00 55 48 89 e5 41 55 41 54 53 48 89 fb e8 af 6e 95 fd 48 89 df e8 e7 9f 1c 01 49 89 c5 48 8b 83 48 08 00 00 <66> 44 8b 60 02 44 89 e0 48 8b 93 48 08 00 00 83 e0 f8 66 89 42 02 [ 27.731339] RSP: 0018:ffffc90000118e90 EFLAGS: 00010046 [ 27.731716] RAX: 0000000000000000 RBX: ffff88810803c4d8 RCX: 0000000000000000 [ 27.732223] RDX: 0000000000000001 RSI: ffffffff85d37b94 RDI: ffff88810803c4d8 [ 27.732727] RBP: ffffc90000118ea8 R08: 0000000000000000 R09: 0000000000000001 [ 27.733239] R10: ffff88810803c4f0 R11: 61646e6f63657320 R12: 0000000000000000 [ 27.733745] R13: 0000000000000046 R14: ffff888101041000 R15: ffff8881081b2400 [ 27.734251] FS: 0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000 [ 27.734821] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 27.735228] CR2: 0000000000000002 CR3: 0000000108194000 CR4: 00000000000006e0 [ 27.735735] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 27.736241] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 27.736744] Call Trace: [ 27.736924] <IRQ> [ 27.737074] netup_unidvb_isr+0xd3/0x160 [ 27.737363] __handle_irq_event_percpu+0x53/0x3e0 [ 27.737706] handle_irq_event_percpu+0x35/0x90 [ 27.738028] handle_irq_event+0x39/0x60 [ 27.738306] handle_fasteoi_irq+0xc2/0x1d0 [ 27.738602] __common_interrupt+0x7f/0x150 [ 27.738899] common_interrupt+0xb4/0xd0 [ 27.739176] </IRQ> [ 27.739331] asm_common_interrupt+0x1e/0x40 [ 27.739633] RIP: 0010:native_safe_halt+0x17/0x20 [ 27.739967] Code: 07 0f 00 2d 8b ee 4c 00 f4 5d c3 0f 1f 84 00 00 00 00 00 8b 05 72 95 17 02 55 48 89 e5 85 c0 7e 07 0f 00 2d 6b ee 4c 00 fb f4 <5d> c3 cc cc cc cc cc cc cc 55 48 89 e5 e8 67 53 ff ff 8b 0d 29 f6 [ 27.741275] RSP: 0018:ffffc9000008fe90 EFLAGS: 00000246 [ 27.741647] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 [ 27.742148] RDX: 0000000000000000 RSI: ffffffff85f7c054 RDI: ffffffff85ded4e6 [ 27.742652] RBP: ffffc9000008fe90 R08: 0000000000000001 R09: 0000000000000001 [ 27.743154] R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff86a75408 [ 27.743652] R13: 0000000000000000 R14: 0000000000000000 R15: ffff888100260000 [ 27.744157] default_idle+0x9/0x10 [ 27.744405] arch_cpu_idle+0xa/0x10 [ 27.744658] default_idle_call+0x6e/0x250 [ 27.744948] do_idle+0x1f0/0x2d0 [ 27.745190] cpu_startup_entry+0x18/0x20 [ 27.745475] start_secondary+0x11f/0x160 [ 27.745761] secondary_startup_64_no_verify+0xb0/0xbb [ 27.746123] Modules linked in: [ 27.746348] Dumping ftrace buffer: [ 27.746596] (ftrace buffer empty) [ 27.746852] CR2: 0000000000000002 [ 27.747094] ---[ end trace ebafd46f83ab946d ]--- [ 27.747424] RIP: 0010:netup_i2c_interrupt+0x23/0x310 [ 27.747778] Code: 0f 1f 80 00 00 00 00 55 48 89 e5 41 55 41 54 53 48 89 fb e8 af 6e 95 fd 48 89 df e8 e7 9f 1c 01 49 89 c5 48 8b 83 48 08 00 00 <66> 44 8b 60 02 44 89 e0 48 8b 93 48 08 00 00 83 e0 f8 66 89 42 02 [ 27.749082] RSP: 0018:ffffc90000118e90 EFLAGS: 00010046 [ 27.749461] RAX: 0000000000000000 RBX: ffff88810803c4d8 RCX: 0000000000000000 [ 27.749966] RDX: 0000000000000001 RSI: ffffffff85d37b94 RDI: ffff88810803c4d8 [ 27.750471] RBP: ffffc90000118ea8 R08: 0000000000000000 R09: 0000000000000001 [ 27.750976] R10: ffff88810803c4f0 R11: 61646e6f63657320 R12: 0000000000000000 [ 27.751480] R13: 0000000000000046 R14: ffff888101041000 R15: ffff8881081b2400 [ 27.751986] FS: 0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000 [ 27.752560] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 27.752970] CR2: 0000000000000002 CR3: 0000000108194000 CR4: 00000000000006e0 [ 27.753481] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 27.753984] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 27.754487] Kernel panic - not syncing: Fatal exception in interrupt [ 27.755033] Dumping ftrace buffer: [ 27.755279] (ftrace buffer empty) [ 27.755534] Kernel Offset: disabled [ 27.755785] Rebooting in 1 seconds.. Signed-off-by: Zheyu Ma <[email protected]> Signed-off-by: Sean Young <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit f043bfc upstream. The hid descriptor identifies the length and type of subordinate descriptors for a device. If the received hid descriptor is smaller than the size of the struct hid_descriptor, it is possible to cause out-of-bounds. In addition, if bNumDescriptors of the hid descriptor have an incorrect value, this can also cause out-of-bounds while approaching hdesc->desc[n]. So check the size of hid descriptor and bNumDescriptors. BUG: KASAN: slab-out-of-bounds in usbhid_parse+0x9b1/0xa20 Read of size 1 at addr ffff88006c5f8edf by task kworker/1:2/1261 CPU: 1 PID: 1261 Comm: kworker/1:2 Not tainted 4.14.0-rc1-42251-gebb2c2437d80 torvalds#169 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:16 dump_stack+0x292/0x395 lib/dump_stack.c:52 print_address_description+0x78/0x280 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 kasan_report+0x22f/0x340 mm/kasan/report.c:409 __asan_report_load1_noabort+0x19/0x20 mm/kasan/report.c:427 usbhid_parse+0x9b1/0xa20 drivers/hid/usbhid/hid-core.c:1004 hid_add_device+0x16b/0xb30 drivers/hid/hid-core.c:2944 usbhid_probe+0xc28/0x1100 drivers/hid/usbhid/hid-core.c:1369 usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_set_configuration+0x104e/0x1870 drivers/usb/core/message.c:1932 generic_probe+0x73/0xe0 drivers/usb/core/generic.c:174 usb_probe_device+0xaf/0xe0 drivers/usb/core/driver.c:266 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_new_device+0x7b8/0x1020 drivers/usb/core/hub.c:2457 hub_port_connect drivers/usb/core/hub.c:4903 hub_port_connect_change drivers/usb/core/hub.c:5009 port_event drivers/usb/core/hub.c:5115 hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195 process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119 worker_thread+0x221/0x1850 kernel/workqueue.c:2253 kthread+0x3a1/0x470 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431 Reported-by: Andrey Konovalov <[email protected]> Signed-off-by: Jaejoong Kim <[email protected]> Tested-by: Andrey Konovalov <[email protected]> Acked-by: Alan Stern <[email protected]> Signed-off-by: Jiri Kosina <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

The hid descriptor identifies the length and type of subordinate descriptors for a device. If the received hid descriptor is smaller than the size of the struct hid_descriptor, it is possible to cause out-of-bounds. In addition, if bNumDescriptors of the hid descriptor have an incorrect value, this can also cause out-of-bounds while approaching hdesc->desc[n]. So check the size of hid descriptor and bNumDescriptors. BUG: KASAN: slab-out-of-bounds in usbhid_parse+0x9b1/0xa20 Read of size 1 at addr ffff88006c5f8edf by task kworker/1:2/1261 CPU: 1 PID: 1261 Comm: kworker/1:2 Not tainted 4.14.0-rc1-42251-gebb2c2437d80 torvalds#169 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:16 dump_stack+0x292/0x395 lib/dump_stack.c:52 print_address_description+0x78/0x280 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 kasan_report+0x22f/0x340 mm/kasan/report.c:409 __asan_report_load1_noabort+0x19/0x20 mm/kasan/report.c:427 usbhid_parse+0x9b1/0xa20 drivers/hid/usbhid/hid-core.c:1004 hid_add_device+0x16b/0xb30 drivers/hid/hid-core.c:2944 usbhid_probe+0xc28/0x1100 drivers/hid/usbhid/hid-core.c:1369 usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_set_configuration+0x104e/0x1870 drivers/usb/core/message.c:1932 generic_probe+0x73/0xe0 drivers/usb/core/generic.c:174 usb_probe_device+0xaf/0xe0 drivers/usb/core/driver.c:266 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_new_device+0x7b8/0x1020 drivers/usb/core/hub.c:2457 hub_port_connect drivers/usb/core/hub.c:4903 hub_port_connect_change drivers/usb/core/hub.c:5009 port_event drivers/usb/core/hub.c:5115 hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195 process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119 worker_thread+0x221/0x1850 kernel/workqueue.c:2253 kthread+0x3a1/0x470 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431 Change-Id: I9aa1b3f07a27d78a8e0246c51e9464349b2511cc Git-commit: f043bfc Git-repo: https://github.com/torvalds/linux Cc: [email protected] Reported-by: Andrey Konovalov <[email protected]> Signed-off-by: Jaejoong Kim <[email protected]> Tested-by: Andrey Konovalov <[email protected]> Acked-by: Alan Stern <[email protected]> Signed-off-by: Jiri Kosina <[email protected]> Signed-off-by: Srinivasa Rao Kuppala <[email protected]>

When arm_ffa firmware driver module is unloaded or removed we call __ffa_devices_unregister on all the devices on the ffa bus. It must unregister all the devices instead it is currently just releasing the devices without unregistering. That is pure wrong as when we try to load the module back again, it will result in the kernel crash something like below. -->8 CPU: 2 PID: 232 Comm: modprobe Not tainted 5.15.0-rc2+ torvalds#169 Hardware name: FVP Base RevC (DT) Call trace: dump_backtrace+0x0/0x1cc show_stack+0x18/0x64 dump_stack_lvl+0x64/0x7c dump_stack+0x18/0x38 sysfs_create_dir_ns+0xe4/0x140 kobject_add_internal+0x170/0x358 kobject_add+0x94/0x100 device_add+0x178/0x5f0 device_register+0x20/0x30 ffa_device_register+0x80/0xcc [ffa_module] ffa_setup_partitions+0x7c/0x108 [ffa_module] init_module+0x290/0x2dc [ffa_module] do_one_initcall+0xbc/0x230 do_init_module+0x58/0x304 load_module+0x15e0/0x1f68 __arm64_sys_finit_module+0xb8/0xf4 invoke_syscall+0x44/0x140 el0_svc_common+0xb4/0xf0 do_el0_svc+0x24/0x80 el0_svc+0x20/0x50 el0t_64_sync_handler+0x84/0xe4 el0t_64_sync+0x1a0/0x1a4 kobject_add_internal failed for arm-ffa-8001 with -EEXIST, don't try to register things with the same name in the same directory. ---- Fix the issue by calling device_unregister in __ffa_devices_unregister which will also take care of calling device_release(which is mapped to ffa_release_device) Link: https://lore.kernel.org/r/[email protected] Fixes: e781858 ("firmware: arm_ffa: Add initial FFA bus support for device enumeration") Tested-by: Jens Wiklander <[email protected]> Signed-off-by: Sudeep Holla <[email protected]> (cherry picked from commit eb7b52e) Change-Id: Ib285280cedc3c10376c0134f5036a68819fb9534 Bug: 168585974 Signed-off-by: Will Deacon <[email protected]>

Pu Lehui says: ==================== patch 1 fix a minor issue where usdt_cookie is cast to 32 bits. patch 2 add support riscv libbpf USDT argument parsing logic, both RV32 and RV64 tests have been passed as like follow: # ./test_progs -t usdt torvalds#169 usdt:OK Summary: 1/4 PASSED, 0 SKIPPED, 0 FAILED ==================== Signed-off-by: Andrii Nakryiko <[email protected]>

PD#150094: driver defect clean up: torvalds#32 torvalds#86 torvalds#90 torvalds#92 torvalds#97 torvalds#101 torvalds#103 torvalds#152 torvalds#155 torvalds#157~torvalds#158 torvalds#164 torvalds#167 torvalds#169~torvalds#179 torvalds#187~torvalds#191 torvalds#193~torvalds#199 torvalds#201~torvalds#210 torvalds#212~torvalds#213 torvalds#316~torvalds#319 torvalds#385 torvalds#572 torvalds#693~torvalds#694 torvalds#696~torvalds#697 Change-Id: I9669e5c0d717ee2287faf57a271ff27692039802 Signed-off-by: Guosong Zhou <[email protected]>

syzbot report below bug[1]. Fix it with checking null pointer before deferring i_crypt_info. [1] general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 3 PID: 456 Comm: repro Not tainted 6.1.0+gc0daf896 torvalds#169 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:fscrypt_limit_io_blocks+0xfa/0x2c0 Call Trace: <TASK> ext4_iomap_begin+0x6c5/0x7e0 ? asym_cpu_capacity_scan+0x6b0/0x6b0 ? ext4_iomap_begin_report+0x6b0/0x6b0 ? __sanitizer_cov_trace_const_cmp1+0x1a/0x20 ? ext4_commit_super+0x3c1/0x560 ? __sanitizer_cov_trace_const_cmp4+0x16/0x20 ? ext4_handle_error+0x3bf/0x6b0 ? ext4_iomap_begin_report+0x6b0/0x6b0 iomap_iter+0x538/0xc80 iomap_bmap+0x1ed/0x2d0 ? iomap_to_fiemap+0x220/0x220 ? rwsem_down_read_slowpath+0xc00/0xc00 ? __ext4_iget+0x19c/0x4370 ext4_bmap+0x288/0x470 ? mpage_prepare_extent_to_map+0xd80/0xd80 bmap+0xb1/0x120 jbd2_journal_init_inode+0x7d/0x3f0 ? up_write+0x6c/0xb0 ? jbd2_journal_init_dev+0x130/0x130 ? register_shrinker+0x33/0x160 ext4_fill_super+0xa467/0xc650 ? __sanitizer_cov_trace_const_cmp4+0x16/0x20 ? ext4_reconfigure+0x2ad0/0x2ad0 ? snprintf+0xbb/0xf0 ? vsprintf+0x40/0x40 ? up_write+0x6c/0xb0 ? __sanitizer_cov_trace_cmp4+0x16/0x20 ? set_blocksize+0x2f0/0x380 get_tree_bdev+0x438/0x740 ? get_tree_bdev+0x438/0x740 ? ext4_reconfigure+0x2ad0/0x2ad0 ext4_get_tree+0x1d/0x30 vfs_get_tree+0x88/0x2e0 path_mount+0x6ca/0x1ec0 ? putname+0x110/0x150 ? finish_automount+0x790/0x790 ? putname+0x115/0x150 __x64_sys_mount+0x2aa/0x340 ? copy_mnt_ns+0xab0/0xab0 ? __sanitizer_cov_trace_cmp4+0x16/0x20 ? exit_to_user_mode_prepare+0x40/0x120 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: 5fee360 ("fscrypt: add inline encryption support") Reported-by: [email protected] Signed-off-by: Jun Nie <[email protected]>

Change Radxa CM3 IO device tree name, model, compatible. Signed-off-by: Stephen Chen <[email protected]>

@2

Recent additions in BPF like cpu v4 instructions, test_bpf module exhibits the following failures: test_bpf: torvalds#82 ALU_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#83 ALU_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#84 ALU64_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#85 ALU64_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#86 ALU64_MOVSX | BPF_W jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#165 ALU_SDIV_X: -6 / 2 = -3 jited:1 ret 2147483645 != -3 (0x7ffffffd != 0xfffffffd)FAIL (1 times) test_bpf: torvalds#166 ALU_SDIV_K: -6 / 2 = -3 jited:1 ret 2147483645 != -3 (0x7ffffffd != 0xfffffffd)FAIL (1 times) test_bpf: torvalds#169 ALU_SMOD_X: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: torvalds#170 ALU_SMOD_K: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: torvalds#172 ALU64_SMOD_K: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: torvalds#313 BSWAP 16: 0x0123456789abcdef -> 0xefcd eBPF filter opcode 00d7 (@2) unsupported jited:0 301 PASS test_bpf: torvalds#314 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 eBPF filter opcode 00d7 (@2) unsupported jited:0 555 PASS test_bpf: torvalds#315 BSWAP 64: 0x0123456789abcdef -> 0x67452301 eBPF filter opcode 00d7 (@2) unsupported jited:0 268 PASS test_bpf: torvalds#316 BSWAP 64: 0x0123456789abcdef >> 32 -> 0xefcdab89 eBPF filter opcode 00d7 (@2) unsupported jited:0 269 PASS test_bpf: torvalds#317 BSWAP 16: 0xfedcba9876543210 -> 0x1032 eBPF filter opcode 00d7 (@2) unsupported jited:0 460 PASS test_bpf: torvalds#318 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 eBPF filter opcode 00d7 (@2) unsupported jited:0 320 PASS test_bpf: torvalds#319 BSWAP 64: 0xfedcba9876543210 -> 0x98badcfe eBPF filter opcode 00d7 (@2) unsupported jited:0 222 PASS test_bpf: torvalds#320 BSWAP 64: 0xfedcba9876543210 >> 32 -> 0x10325476 eBPF filter opcode 00d7 (@2) unsupported jited:0 273 PASS test_bpf: torvalds#344 BPF_LDX_MEMSX | BPF_B eBPF filter opcode 0091 (@5) unsupported jited:0 432 PASS test_bpf: torvalds#345 BPF_LDX_MEMSX | BPF_H eBPF filter opcode 0089 (@5) unsupported jited:0 381 PASS test_bpf: torvalds#346 BPF_LDX_MEMSX | BPF_W eBPF filter opcode 0081 (@5) unsupported jited:0 505 PASS test_bpf: torvalds#490 JMP32_JA: Unconditional jump: if (true) return 1 eBPF filter opcode 0006 (@1) unsupported jited:0 261 PASS test_bpf: Summary: 1040 PASSED, 10 FAILED, [924/1038 JIT'ed] Fix them by adding missing processing. Fixes: daabb2b ("bpf/tests: add tests for cpuv4 instructions") Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/91de862dda99d170697eb79ffb478678af7e0b27.1709652689.git.christophe.leroy@csgroup.eu

@2

[ Upstream commit 8ecf3c1 ] Recent additions in BPF like cpu v4 instructions, test_bpf module exhibits the following failures: test_bpf: torvalds#82 ALU_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#83 ALU_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#84 ALU64_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#85 ALU64_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#86 ALU64_MOVSX | BPF_W jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#165 ALU_SDIV_X: -6 / 2 = -3 jited:1 ret 2147483645 != -3 (0x7ffffffd != 0xfffffffd)FAIL (1 times) test_bpf: torvalds#166 ALU_SDIV_K: -6 / 2 = -3 jited:1 ret 2147483645 != -3 (0x7ffffffd != 0xfffffffd)FAIL (1 times) test_bpf: torvalds#169 ALU_SMOD_X: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: torvalds#170 ALU_SMOD_K: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: torvalds#172 ALU64_SMOD_K: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: torvalds#313 BSWAP 16: 0x0123456789abcdef -> 0xefcd eBPF filter opcode 00d7 (@2) unsupported jited:0 301 PASS test_bpf: torvalds#314 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 eBPF filter opcode 00d7 (@2) unsupported jited:0 555 PASS test_bpf: torvalds#315 BSWAP 64: 0x0123456789abcdef -> 0x67452301 eBPF filter opcode 00d7 (@2) unsupported jited:0 268 PASS test_bpf: torvalds#316 BSWAP 64: 0x0123456789abcdef >> 32 -> 0xefcdab89 eBPF filter opcode 00d7 (@2) unsupported jited:0 269 PASS test_bpf: torvalds#317 BSWAP 16: 0xfedcba9876543210 -> 0x1032 eBPF filter opcode 00d7 (@2) unsupported jited:0 460 PASS test_bpf: torvalds#318 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 eBPF filter opcode 00d7 (@2) unsupported jited:0 320 PASS test_bpf: torvalds#319 BSWAP 64: 0xfedcba9876543210 -> 0x98badcfe eBPF filter opcode 00d7 (@2) unsupported jited:0 222 PASS test_bpf: torvalds#320 BSWAP 64: 0xfedcba9876543210 >> 32 -> 0x10325476 eBPF filter opcode 00d7 (@2) unsupported jited:0 273 PASS test_bpf: torvalds#344 BPF_LDX_MEMSX | BPF_B eBPF filter opcode 0091 (@5) unsupported jited:0 432 PASS test_bpf: torvalds#345 BPF_LDX_MEMSX | BPF_H eBPF filter opcode 0089 (@5) unsupported jited:0 381 PASS test_bpf: torvalds#346 BPF_LDX_MEMSX | BPF_W eBPF filter opcode 0081 (@5) unsupported jited:0 505 PASS test_bpf: torvalds#490 JMP32_JA: Unconditional jump: if (true) return 1 eBPF filter opcode 0006 (@1) unsupported jited:0 261 PASS test_bpf: Summary: 1040 PASSED, 10 FAILED, [924/1038 JIT'ed] Fix them by adding missing processing. Fixes: daabb2b ("bpf/tests: add tests for cpuv4 instructions") Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/91de862dda99d170697eb79ffb478678af7e0b27.1709652689.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin <[email protected]>

@2

[ Upstream commit 8ecf3c1 ] Recent additions in BPF like cpu v4 instructions, test_bpf module exhibits the following failures: test_bpf: torvalds#82 ALU_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#83 ALU_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#84 ALU64_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#85 ALU64_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#86 ALU64_MOVSX | BPF_W jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#165 ALU_SDIV_X: -6 / 2 = -3 jited:1 ret 2147483645 != -3 (0x7ffffffd != 0xfffffffd)FAIL (1 times) test_bpf: torvalds#166 ALU_SDIV_K: -6 / 2 = -3 jited:1 ret 2147483645 != -3 (0x7ffffffd != 0xfffffffd)FAIL (1 times) test_bpf: torvalds#169 ALU_SMOD_X: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: torvalds#170 ALU_SMOD_K: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: torvalds#172 ALU64_SMOD_K: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: torvalds#313 BSWAP 16: 0x0123456789abcdef -> 0xefcd eBPF filter opcode 00d7 (@2) unsupported jited:0 301 PASS test_bpf: torvalds#314 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 eBPF filter opcode 00d7 (@2) unsupported jited:0 555 PASS test_bpf: torvalds#315 BSWAP 64: 0x0123456789abcdef -> 0x67452301 eBPF filter opcode 00d7 (@2) unsupported jited:0 268 PASS test_bpf: torvalds#316 BSWAP 64: 0x0123456789abcdef >> 32 -> 0xefcdab89 eBPF filter opcode 00d7 (@2) unsupported jited:0 269 PASS test_bpf: torvalds#317 BSWAP 16: 0xfedcba9876543210 -> 0x1032 eBPF filter opcode 00d7 (@2) unsupported jited:0 460 PASS test_bpf: torvalds#318 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 eBPF filter opcode 00d7 (@2) unsupported jited:0 320 PASS test_bpf: torvalds#319 BSWAP 64: 0xfedcba9876543210 -> 0x98badcfe eBPF filter opcode 00d7 (@2) unsupported jited:0 222 PASS test_bpf: torvalds#320 BSWAP 64: 0xfedcba9876543210 >> 32 -> 0x10325476 eBPF filter opcode 00d7 (@2) unsupported jited:0 273 PASS test_bpf: torvalds#344 BPF_LDX_MEMSX | BPF_B eBPF filter opcode 0091 (@5) unsupported jited:0 432 PASS test_bpf: torvalds#345 BPF_LDX_MEMSX | BPF_H eBPF filter opcode 0089 (@5) unsupported jited:0 381 PASS test_bpf: torvalds#346 BPF_LDX_MEMSX | BPF_W eBPF filter opcode 0081 (@5) unsupported jited:0 505 PASS test_bpf: torvalds#490 JMP32_JA: Unconditional jump: if (true) return 1 eBPF filter opcode 0006 (@1) unsupported jited:0 261 PASS test_bpf: Summary: 1040 PASSED, 10 FAILED, [924/1038 JIT'ed] Fix them by adding missing processing. Fixes: daabb2b ("bpf/tests: add tests for cpuv4 instructions") Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/91de862dda99d170697eb79ffb478678af7e0b27.1709652689.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin <[email protected]>

@2

[ Upstream commit 8ecf3c1 ] Recent additions in BPF like cpu v4 instructions, test_bpf module exhibits the following failures: test_bpf: torvalds#82 ALU_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#83 ALU_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#84 ALU64_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#85 ALU64_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#86 ALU64_MOVSX | BPF_W jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#165 ALU_SDIV_X: -6 / 2 = -3 jited:1 ret 2147483645 != -3 (0x7ffffffd != 0xfffffffd)FAIL (1 times) test_bpf: torvalds#166 ALU_SDIV_K: -6 / 2 = -3 jited:1 ret 2147483645 != -3 (0x7ffffffd != 0xfffffffd)FAIL (1 times) test_bpf: torvalds#169 ALU_SMOD_X: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: torvalds#170 ALU_SMOD_K: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: torvalds#172 ALU64_SMOD_K: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: torvalds#313 BSWAP 16: 0x0123456789abcdef -> 0xefcd eBPF filter opcode 00d7 (@2) unsupported jited:0 301 PASS test_bpf: torvalds#314 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 eBPF filter opcode 00d7 (@2) unsupported jited:0 555 PASS test_bpf: torvalds#315 BSWAP 64: 0x0123456789abcdef -> 0x67452301 eBPF filter opcode 00d7 (@2) unsupported jited:0 268 PASS test_bpf: torvalds#316 BSWAP 64: 0x0123456789abcdef >> 32 -> 0xefcdab89 eBPF filter opcode 00d7 (@2) unsupported jited:0 269 PASS test_bpf: torvalds#317 BSWAP 16: 0xfedcba9876543210 -> 0x1032 eBPF filter opcode 00d7 (@2) unsupported jited:0 460 PASS test_bpf: torvalds#318 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 eBPF filter opcode 00d7 (@2) unsupported jited:0 320 PASS test_bpf: torvalds#319 BSWAP 64: 0xfedcba9876543210 -> 0x98badcfe eBPF filter opcode 00d7 (@2) unsupported jited:0 222 PASS test_bpf: torvalds#320 BSWAP 64: 0xfedcba9876543210 >> 32 -> 0x10325476 eBPF filter opcode 00d7 (@2) unsupported jited:0 273 PASS test_bpf: torvalds#344 BPF_LDX_MEMSX | BPF_B eBPF filter opcode 0091 (@5) unsupported jited:0 432 PASS test_bpf: torvalds#345 BPF_LDX_MEMSX | BPF_H eBPF filter opcode 0089 (@5) unsupported jited:0 381 PASS test_bpf: torvalds#346 BPF_LDX_MEMSX | BPF_W eBPF filter opcode 0081 (@5) unsupported jited:0 505 PASS test_bpf: torvalds#490 JMP32_JA: Unconditional jump: if (true) return 1 eBPF filter opcode 0006 (@1) unsupported jited:0 261 PASS test_bpf: Summary: 1040 PASSED, 10 FAILED, [924/1038 JIT'ed] Fix them by adding missing processing. Fixes: daabb2b ("bpf/tests: add tests for cpuv4 instructions") Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/91de862dda99d170697eb79ffb478678af7e0b27.1709652689.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin <[email protected]>

Update cputime.c

0b1553a

spelling mistake

dautovri closed this Mar 16, 2015

xin3liang pushed a commit to xin3liang/linux that referenced this pull request Jan 14, 2016

Merge pull request torvalds#169 from 96boards/revert-pull-request-163

5e47986

Revert "Quick fix so that driver retrieves addresses from device tree…

mj22226 pushed a commit to mj22226/linux that referenced this pull request Jul 30, 2023

Merge pull request torvalds#169 from vamrs-feng/pr_compa

fc20e0b

Change Radxa CM3 IO device tree name, model, compatible. Signed-off-by: Stephen Chen <[email protected]>

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Update cputime.c #169

Update cputime.c #169

dautovri commented Mar 16, 2015

Update cputime.c #169

Update cputime.c #169

Conversation

dautovri commented Mar 16, 2015