ASoC: SOF: enable msi for sof hda audio #29
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This patch tries to enable msi for sof hda audio driver. If it fails (not supported by HW/BIOS), it will use the legacy interrupt mode. Signed-off-by: Libin Yang <[email protected]>
|
test passes on apl and cnl |
plbossart
approved these changes
Jul 10, 2018
cujomalainey
pushed a commit
to cujomalainey/linux
that referenced
this pull request
Jul 9, 2019
…remove. Problem: When executing echo 1 > /sys/class/drm/card0/device/remove kasan warning as bellow and page fault happen because adev->gart.pages already freed by the time amdgpu_gart_unbind is called. BUG: KASAN: user-memory-access in amdgpu_gart_unbind+0x98/0x180 [amdgpu] Write of size 8 at addr 0000000000003648 by task bash/1828 CPU: 2 PID: 1828 Comm: bash Tainted: G W O 4.18.0-rc1-dev+ thesofproject#29 Hardware name: Gigabyte Technology Co., Ltd. AX370-Gaming/AX370-Gaming-CF, BIOS F3 06/19/2017 Call Trace: dump_stack+0x71/0xab kasan_report+0x109/0x390 amdgpu_gart_unbind+0x98/0x180 [amdgpu] ttm_tt_unbind+0x43/0x60 [ttm] ttm_bo_move_ttm+0x83/0x1c0 [ttm] ttm_bo_handle_move_mem+0xb97/0xd00 [ttm] ttm_bo_evict+0x273/0x530 [ttm] ttm_mem_evict_first+0x29c/0x360 [ttm] ttm_bo_force_list_clean+0xfc/0x210 [ttm] ttm_bo_clean_mm+0xe7/0x160 [ttm] amdgpu_ttm_fini+0xda/0x1d0 [amdgpu] amdgpu_bo_fini+0xf/0x60 [amdgpu] gmc_v8_0_sw_fini+0x36/0x70 [amdgpu] amdgpu_device_fini+0x2d0/0x7d0 [amdgpu] amdgpu_driver_unload_kms+0x6a/0xd0 [amdgpu] drm_dev_unregister+0x79/0x180 [drm] amdgpu_pci_remove+0x2a/0x60 [amdgpu] pci_device_remove+0x5b/0x100 device_release_driver_internal+0x236/0x360 pci_stop_bus_device+0xbf/0xf0 pci_stop_and_remove_bus_device_locked+0x16/0x30 remove_store+0xda/0xf0 kernfs_fop_write+0x186/0x220 __vfs_write+0xcc/0x330 vfs_write+0xe6/0x250 ksys_write+0xb1/0x140 do_syscall_64+0x77/0x1e0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f66ebbb32c0 Fix: Split gmc_v{6,7,8,9}_0_gart_fini to postpone amdgpu_gart_fini to after memory managers are shut down since gart unbind happens as part of this procedure BUG=b:112542653 TEST=boot grunt, run login_LoginSuccess, graphics_SanAngeles, cheets_StartAndroid Signed-off-by: Andrey Grodzovsky <[email protected]> Reviewed-by: Junwei Zhang <[email protected]> Acked-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]> (cherry picked from commit eb7e5cf) Signed-off-by: Dominik Behr <[email protected]> Change-Id: Ia69d619c3a5cb714f7e4afbc0a4daa48511c1181
bardliao
pushed a commit
to bardliao/linux
that referenced
this pull request
Feb 25, 2020
Loading the driver on a system with W83627DHG-P crashes as follows. w83627ehf: Found W83627DHG-P chip at 0x290 BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 0 PID: 604 Comm: sensors Not tainted 5.6.0-rc2-00055-gca7e1fd1026c thesofproject#29 Hardware name: /D425KT, BIOS MWPNT10N.86A.0132.2013.0726.1534 07/26/2013 RIP: 0010:w83627ehf_read_string+0x27/0x70 [w83627ehf] Code: [... ] RSP: 0018:ffffb95980657df8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff96caaa7f5218 RCX: 0000000000000000 RDX: 0000000000000015 RSI: 0000000000000001 RDI: ffff96caa736ec08 RBP: 0000000000000000 R08: ffffb95980657e20 R09: 0000000000000001 R10: ffff96caaa635cc0 R11: 0000000000000000 R12: ffff96caa9f7cf00 R13: ffff96caa9ec3d00 R14: ffff96caa9ec3d28 R15: ffff96caa9ec3d40 FS: 00007fbc7c4e2740(0000) GS:ffff96caabc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000129d58000 CR4: 00000000000006f0 Call Trace: ? cp_new_stat+0x12d/0x160 hwmon_attr_show_string+0x37/0x70 [hwmon] dev_attr_show+0x14/0x50 sysfs_kf_seq_show+0xb5/0x1b0 seq_read+0xcf/0x460 vfs_read+0x9b/0x150 ksys_read+0x5f/0xe0 do_syscall_64+0x48/0x190 entry_SYSCALL_64_after_hwframe+0x44/0xa9 ... Temperature labels are not always present. Adjust sysfs attribute visibility accordingly. Reported-by: Meelis Roos <[email protected]> Suggested-by: Dr. David Alan Gilbert <[email protected]> Reviewed-by: Dr. David Alan Gilbert <[email protected]> Cc: Meelis Roos <[email protected]> Cc: Dr. David Alan Gilbert <[email protected]> Fixes: 266cd58 ("hwmon: (w83627ehf) convert to with_info interface") Signed-off-by: Guenter Roeck <[email protected]>
plbossart
pushed a commit
that referenced
this pull request
Jul 17, 2020
In case devlink reload failed, it is possible to trigger a use-after-free when querying the kernel for device info via 'devlink dev info' [1]. This happens because as part of the reload error path the PCI command interface is de-initialized and its mailboxes are freed. When the devlink '->info_get()' callback is invoked the device is queried via the command interface and the freed mailboxes are accessed. Fix this by initializing the command interface once during probe and not during every reload. This is consistent with the other bus used by mlxsw (i.e., 'mlxsw_i2c') and also allows user space to query the running firmware version (for example) from the device after a failed reload. [1] BUG: KASAN: use-after-free in memcpy include/linux/string.h:406 [inline] BUG: KASAN: use-after-free in mlxsw_pci_cmd_exec+0x177/0xa60 drivers/net/ethernet/mellanox/mlxsw/pci.c:1675 Write of size 4096 at addr ffff88810ae32000 by task syz-executor.1/2355 CPU: 1 PID: 2355 Comm: syz-executor.1 Not tainted 5.8.0-rc2+ #29 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xf6/0x16e lib/dump_stack.c:118 print_address_description.constprop.0+0x1c/0x250 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530 check_memory_region_inline mm/kasan/generic.c:186 [inline] check_memory_region+0x14e/0x1b0 mm/kasan/generic.c:192 memcpy+0x39/0x60 mm/kasan/common.c:106 memcpy include/linux/string.h:406 [inline] mlxsw_pci_cmd_exec+0x177/0xa60 drivers/net/ethernet/mellanox/mlxsw/pci.c:1675 mlxsw_cmd_exec+0x249/0x550 drivers/net/ethernet/mellanox/mlxsw/core.c:2335 mlxsw_cmd_access_reg drivers/net/ethernet/mellanox/mlxsw/cmd.h:859 [inline] mlxsw_core_reg_access_cmd drivers/net/ethernet/mellanox/mlxsw/core.c:1938 [inline] mlxsw_core_reg_access+0x2f6/0x540 drivers/net/ethernet/mellanox/mlxsw/core.c:1985 mlxsw_reg_query drivers/net/ethernet/mellanox/mlxsw/core.c:2000 [inline] mlxsw_devlink_info_get+0x17f/0x6e0 drivers/net/ethernet/mellanox/mlxsw/core.c:1090 devlink_nl_info_fill.constprop.0+0x13c/0x2d0 net/core/devlink.c:4588 devlink_nl_cmd_info_get_dumpit+0x246/0x460 net/core/devlink.c:4648 genl_lock_dumpit+0x85/0xc0 net/netlink/genetlink.c:575 netlink_dump+0x515/0xe50 net/netlink/af_netlink.c:2245 __netlink_dump_start+0x53d/0x830 net/netlink/af_netlink.c:2353 genl_family_rcv_msg_dumpit.isra.0+0x296/0x300 net/netlink/genetlink.c:638 genl_family_rcv_msg net/netlink/genetlink.c:733 [inline] genl_rcv_msg+0x78d/0x9d0 net/netlink/genetlink.c:753 netlink_rcv_skb+0x152/0x440 net/netlink/af_netlink.c:2469 genl_rcv+0x24/0x40 net/netlink/genetlink.c:764 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] netlink_unicast+0x53a/0x750 net/netlink/af_netlink.c:1329 netlink_sendmsg+0x850/0xd90 net/netlink/af_netlink.c:1918 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0x150/0x190 net/socket.c:672 ____sys_sendmsg+0x6d8/0x840 net/socket.c:2363 ___sys_sendmsg+0xff/0x170 net/socket.c:2417 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2450 do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: a9c8336 ("mlxsw: core: Add support for devlink info command") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
cujomalainey
pushed a commit
to cujomalainey/linux
that referenced
this pull request
Oct 26, 2020
[ Upstream commit b514191 ] The commit cited below removed the RCU read-side critical section from rtnl_fdb_dump() which means that the ndo_fdb_dump() callback is invoked without RCU protection. This results in the following warning [1] in the VXLAN driver, which relied on the callback being invoked from an RCU read-side critical section. Fix this by calling rcu_read_lock() in the VXLAN driver, as already done in the bridge driver. [1] WARNING: suspicious RCU usage 5.8.0-rc4-custom-01521-g481007553ce6 thesofproject#29 Not tainted ----------------------------- drivers/net/vxlan.c:1379 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by bridge/166: #0: ffffffff85a27850 (rtnl_mutex){+.+.}-{3:3}, at: netlink_dump+0xea/0x1090 stack backtrace: CPU: 1 PID: 166 Comm: bridge Not tainted 5.8.0-rc4-custom-01521-g481007553ce6 thesofproject#29 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack+0x100/0x184 lockdep_rcu_suspicious+0x153/0x15d vxlan_fdb_dump+0x51e/0x6d0 rtnl_fdb_dump+0x4dc/0xad0 netlink_dump+0x540/0x1090 __netlink_dump_start+0x695/0x950 rtnetlink_rcv_msg+0x802/0xbd0 netlink_rcv_skb+0x17a/0x480 rtnetlink_rcv+0x22/0x30 netlink_unicast+0x5ae/0x890 netlink_sendmsg+0x98a/0xf40 __sys_sendto+0x279/0x3b0 __x64_sys_sendto+0xe6/0x1a0 do_syscall_64+0x54/0xa0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fe14fa2ade0 Code: Bad RIP value. RSP: 002b:00007fff75bb5b88 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00005614b1ba0020 RCX: 00007fe14fa2ade0 RDX: 000000000000011c RSI: 00007fff75bb5b90 RDI: 0000000000000003 RBP: 00007fff75bb5b90 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00005614b1b89160 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Fixes: 5e6d243 ("bridge: netlink dump interface at par with brctl") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
cujomalainey
pushed a commit
to cujomalainey/linux
that referenced
this pull request
Oct 26, 2020
[ Upstream commit 96298f6 ] According to Core Spec Version 5.2 | Vol 3, Part A 6.1.5, the incoming L2CAP_ConfigReq should be handled during OPEN state. The section below shows the btmon trace when running L2CAP/COS/CFD/BV-12-C before and after this change. === Before === ... > ACL Data RX: Handle 256 flags 0x02 dlen 12 thesofproject#22 L2CAP: Connection Request (0x02) ident 2 len 4 PSM: 1 (0x0001) Source CID: 65 < ACL Data TX: Handle 256 flags 0x00 dlen 16 thesofproject#23 L2CAP: Connection Response (0x03) ident 2 len 8 Destination CID: 64 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 256 flags 0x00 dlen 12 thesofproject#24 L2CAP: Configure Request (0x04) ident 2 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 thesofproject#25 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 thesofproject#26 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 16 thesofproject#27 L2CAP: Configure Request (0x04) ident 3 len 8 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 .. < ACL Data TX: Handle 256 flags 0x00 dlen 18 thesofproject#28 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 > HCI Event: Number of Completed Packets (0x13) plen 5 thesofproject#29 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 14 thesofproject#30 L2CAP: Configure Response (0x05) ident 2 len 6 Source CID: 64 Flags: 0x0000 Result: Success (0x0000) > ACL Data RX: Handle 256 flags 0x02 dlen 20 thesofproject#31 L2CAP: Configure Request (0x04) ident 3 len 12 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 91 02 11 11 ...... < ACL Data TX: Handle 256 flags 0x00 dlen 14 thesofproject#32 L2CAP: Command Reject (0x01) ident 3 len 6 Reason: Invalid CID in request (0x0002) Destination CID: 64 Source CID: 65 > HCI Event: Number of Completed Packets (0x13) plen 5 thesofproject#33 Num handles: 1 Handle: 256 Count: 1 ... === After === ... > ACL Data RX: Handle 256 flags 0x02 dlen 12 thesofproject#22 L2CAP: Connection Request (0x02) ident 2 len 4 PSM: 1 (0x0001) Source CID: 65 < ACL Data TX: Handle 256 flags 0x00 dlen 16 thesofproject#23 L2CAP: Connection Response (0x03) ident 2 len 8 Destination CID: 64 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 256 flags 0x00 dlen 12 thesofproject#24 L2CAP: Configure Request (0x04) ident 2 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 thesofproject#25 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 thesofproject#26 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 16 thesofproject#27 L2CAP: Configure Request (0x04) ident 3 len 8 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 .. < ACL Data TX: Handle 256 flags 0x00 dlen 18 thesofproject#28 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 > HCI Event: Number of Completed Packets (0x13) plen 5 thesofproject#29 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 14 thesofproject#30 L2CAP: Configure Response (0x05) ident 2 len 6 Source CID: 64 Flags: 0x0000 Result: Success (0x0000) > ACL Data RX: Handle 256 flags 0x02 dlen 20 thesofproject#31 L2CAP: Configure Request (0x04) ident 3 len 12 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 91 02 11 11 ..... < ACL Data TX: Handle 256 flags 0x00 dlen 18 thesofproject#32 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 < ACL Data TX: Handle 256 flags 0x00 dlen 12 thesofproject#33 L2CAP: Configure Request (0x04) ident 3 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 thesofproject#34 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 thesofproject#35 Num handles: 1 Handle: 256 Count: 1 ... Signed-off-by: Howard Chung <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
bardliao
pushed a commit
to bardliao/linux
that referenced
this pull request
Nov 25, 2020
When more than a single SCMI device are present in the system, the creation of the notification workqueue with the WQ_SYSFS flag will lead to the following sysfs duplicate node warning: sysfs: cannot create duplicate filename '/devices/virtual/workqueue/scmi_notify' CPU: 0 PID: 20 Comm: kworker/0:1 Not tainted 5.9.0-gdf4dd84a3f7d thesofproject#29 Hardware name: Broadcom STB (Flattened Device Tree) Workqueue: events deferred_probe_work_func Backtrace: show_stack + 0x20/0x24 dump_stack + 0xbc/0xe0 sysfs_warn_dup + 0x70/0x80 sysfs_create_dir_ns + 0x15c/0x1a4 kobject_add_internal + 0x140/0x4d0 kobject_add + 0xc8/0x138 device_add + 0x1dc/0xc20 device_register + 0x24/0x28 workqueue_sysfs_register + 0xe4/0x1f0 alloc_workqueue + 0x448/0x6ac scmi_notification_init + 0x78/0x1dc scmi_probe + 0x268/0x4fc platform_drv_probe + 0x70/0xc8 really_probe + 0x184/0x728 driver_probe_device + 0xa4/0x278 __device_attach_driver + 0xe8/0x148 bus_for_each_drv + 0x108/0x158 __device_attach + 0x190/0x234 device_initial_probe + 0x1c/0x20 bus_probe_device + 0xdc/0xec deferred_probe_work_func + 0xd4/0x11c process_one_work + 0x420/0x8f0 worker_thread + 0x4fc/0x91c kthread + 0x21c/0x22c ret_from_fork + 0x14/0x20 kobject_add_internal failed for scmi_notify with -EEXIST, don't try to register things with the same name in the same directory. arm-scmi brcm_scmi@1: SCMI Notifications - Initialization Failed. arm-scmi brcm_scmi@1: SCMI Notifications NOT available. arm-scmi brcm_scmi@1: SCMI Protocol v1.0 'brcm-scmi:' Firmware version 0x1 Fix this by using dev_name(handle->dev) which guarantees that the name is unique and this also helps correlate which notification workqueue corresponds to which SCMI device instance. Link: https://lore.kernel.org/r/[email protected] Fixes: bd31b24 ("firmware: arm_scmi: Add notification dispatch and delivery") Signed-off-by: Florian Fainelli <[email protected]> [sudeep.holla: trimmed backtrace to remove all unwanted hexcodes and timestamps] Signed-off-by: Sudeep Holla <[email protected]>
aiChaoSONG
pushed a commit
to aiChaoSONG/linux
that referenced
this pull request
May 6, 2021
This is a big PR, but most of it is interdependent to the rest.
- Shared Rust infrastructure: `libkernel`, `libmodule`, `libcore`,
`liballoc`, `libcompiler_builtins`.
+ The Rust modules are now much smaller since they do not contain
several copies of those libraries. Our example `.ko` on release
is just 12 KiB, down from 1.3 MiB. For reference:
`vmlinux` on release w/ Rust is 23 MiB (compressed: 2.1 MiB)
`vmlinux` on release w/o Rust is 22 MiB (compressed: 1.9 MiB)
i.e. the bulk is now shared.
+ Multiple builtin modules are now supported since their symbols
do not collide against each other (fixes thesofproject#9).
+ Faster compilation (less crates to compile & less repetition).
+ We achieve this by compiling all the shared code to `.rlib`s
(and the `.so` for the proc macro). For loadable modules,
we need to rely on the upcoming v0 Rust mangling scheme,
plus we need to export the Rust symbols needed by the `.ko`s.
- Simpler, flat file structure: now a small driver may only need
a single file like `drivers/char/rust_example.rs`, like in C.
+ All the `rust/*` and `driver/char/rust_example/*` files moved
to fit in the new structure: less files around.
- Only `rust-lang/{rust,rust-bindgen,compiler-builtins}` as dependencies.
+ Also helps with the faster compilation.
- Dependency handling integration with `Kbuild`/`fixdep`.
+ Changes to the Rust standard library, kernel headers (bindings),
`rust/` source files, `.rs` changes, command-line changes,
flag changes, etc. all trigger recompilation as needed.
+ Works as expected with parallel support (`-j`).
- Automatic generation of the `exports.c` list:
+ Instead of manually handling the list, all non-local functions
available in `core`, `alloc` and `kernel` are exported, so all
modules should work, regardless of what they need, and without
failing linking due to symbols in the manual list not existing
(e.g. due to differences in config options).
+ They are a lot, though:
* ~6k Rust symbols vs. ~4k C symbols in release.
* However, 4k of those are `bindings_raw` (i.e. duplicated C
ones), which shouldn't be exported. Thus we should look
into making `bindings_raw` private to the crate (at the
moment, the (first) Rust example requires
`<kernel::bindings...::miscdevice as Default>::default`).
+ Licensing:
* `kernel`'s symbols are exported as GPL.
* `core`'s and `alloc`'s symbols are exported as non-GPL so
that third-parties can build Rust modules as long as they
write their own kernel support infrastructure, i.e. without
taking advantage of `kernel`. This seemed to make the most
sense compared to other exports from the kernel, plus it
follows more closely the original licence of the crates.
- Support for GCC-compiled kernels:
+ The generated bindings do not have meaningful differences in our
release config, between GCC 10.1 and Clang 11.
+ Other configs (e.g. our debug one) may add/remove types and functions.
That is fine unless we use them form our bindings.
+ However, there are config options that may not work (e.g.
the randstruct GCC plugin if we use one of those structs).
- Support for `arm64` architecture:
+ Added to the CI: BusyBox is cross-compiled on the fly (increased
timeout a bit to match).
+ Requires weakening of a few compiler builtins and adding
`copy_{from,to}_user` helpers.
- Support for custom `--sysroot` via `KRUSTCFLAGS`.
- Proper `make clean` support.
- Offline builds by default (there is no "online compilation" anymore;
fixes thesofproject#17).
- No interleaved Cargo output (fixes thesofproject#29).
- No nightly dependency on Cargo's `build-std`; since now we manage
the cross-compilation ourselves (should fix thesofproject#27).
- "Big" kallsyms symbol support:
+ I already raised ksym names from 128 to 256 back when I wrote the first
integration. However, Rust symbols can be huge in debug/non-optimized,
so I increased it again to 512; plus the module name from 56 to 248.
+ In turn, this required tuning the table format to support 2-byte lengths
for ksyms. Compression at generation and kernel decompression is covered,
although it may be the case that some script/tool also requires changes
to understand the new table format.
- Since now a kernel can be "Rust-enabled", a new `CONFIG_RUST` option
is added to enable/disable it manually, regardless of whether one has
`rustc` available or not (`CONFIG_HAS_RUST`).
- Improved handling of `rustc` flags (`opt-level`, `debuginfo`, etc.),
by default following what the user selected for C, but customizable
through a Kconfig menu. As well as options for tweaking overflow
checks and debug assertions.
- This rewrite of the Kbuild support is cleaner, i.e. less hacks
in general handling paths (e.g. no more `shell readlink` for `O=`).
- Duplicated the example driver 3 times so that we can test in the CI
that 2 builtins and 2 loadables work, all at the same time.
- Do not export any helpers' symbols.
- Updated the quick start guide.
- Updated CI:
+ Now we always test with 2 builtins and 2 loadables Rust example
drivers, removing the matrix test for builtin/loadable.
+ Added `toolchain` to matrix: now we test building with GCC,
Clang or a full LLVM toolchain.
+ Added `arch` to matrix: now we test both arm64 and x86_64.
+ Added `rustc` to matrix: now we test with a very recent nightly
as well.
+ Only build `output == build` once to reduce the number
of combinations.
+ Debug x86_64 config: more things enabled (debuginfo, kgdb,
unit testing, etc.) that mimic more what a developer would have.
Running the CI will be slightly slower, but should be OK.
Also enable `-C opt-level=0` to test that such an extreme works
and also to see how much bloated everything becomes.
+ Release x86_64 config: disabled `EXPERT` and changed a few things
to make it look more like a normal desktop configuration,
although it is still pretty minimal.
+ The configs for arm64 are `EXPERT` and `EMBEDDED` ones,
very minimal, for the particular CPU we are simulating.
+ Update configs to v5.10.
+ Use `$GITHUB_ENV` to simplify.
- Less `extern crate`s needed since we pass it via `rustc`
(closer to idiomatic 2018 edition Rust code).
Things to note:
- There is two more nightly features used:
+ The new Rust mangling scheme: we know it will be stable
(and the default on, later on).
+ The binary dep-info output: if we remove all other nightly
features, this one can easily go too.
- The hack at `exports.c` to export symbols to loadable modules.
- The hack at `allocator.rs` to get the `__rust_*()` functions.
- The hack to get the proper flags for bindgen on GCC builds.
Signed-off-by: Miguel Ojeda <[email protected]>
plbossart
pushed a commit
that referenced
this pull request
Jun 8, 2022
This commit adds python script to parse CoreSight tracing event and
print out source line and disassembly, it generates readable program
execution flow for easier humans inspecting.
The script receives CoreSight tracing packet with below format:
+------------+------------+------------+
packet(n): | addr | ip | cpu |
+------------+------------+------------+
packet(n+1): | addr | ip | cpu |
+------------+------------+------------+
packet::addr presents the start address of the coming branch sample, and
packet::ip is the last address of the branch smple. Therefore, a code
section between branches starts from packet(n)::addr and it stops at
packet(n+1)::ip. As results we combines the two continuous packets to
generate the address range for instructions:
[ sample(n)::addr .. sample(n+1)::ip ]
The script supports both objdump or llvm-objdump for disassembly with
specifying option '-d'. If doesn't specify option '-d', the script
simply outputs source lines and symbols.
Below shows usages with llvm-objdump or objdump to output disassembly.
# perf script -s scripts/python/arm-cs-trace-disasm.py -- -d llvm-objdump-11 -k ./vmlinux
ARM CoreSight Trace Data Assembler Dump
ffff800008eb3198 <etm4_enable_hw>:
ffff800008eb3310: c0 38 00 35 cbnz w0, 0xffff800008eb3a28 <etm4_enable_hw+0x890>
ffff800008eb3314: 9f 3f 03 d5 dsb sy
ffff800008eb3318: df 3f 03 d5 isb
ffff800008eb331c: f5 5b 42 a9 ldp x21, x22, [sp, #32]
ffff800008eb3320: fb 73 45 a9 ldp x27, x28, [sp, #80]
ffff800008eb3324: e0 82 40 39 ldrb w0, [x23, #32]
ffff800008eb3328: 60 00 00 34 cbz w0, 0xffff800008eb3334 <etm4_enable_hw+0x19c>
ffff800008eb332c: e0 03 19 aa mov x0, x25
ffff800008eb3330: 8c fe ff 97 bl 0xffff800008eb2d60 <etm4_cs_lock.isra.0.part.0>
main 6728/6728 [0004] 0.000000000 etm4_enable_hw+0x198 [kernel.kallsyms]
ffff800008eb2d60 <etm4_cs_lock.isra.0.part.0>:
ffff800008eb2d60: 1f 20 03 d5 nop
ffff800008eb2d64: 1f 20 03 d5 nop
ffff800008eb2d68: 3f 23 03 d5 hint #25
ffff800008eb2d6c: 00 00 40 f9 ldr x0, [x0]
ffff800008eb2d70: 9f 3f 03 d5 dsb sy
ffff800008eb2d74: 00 c0 3e 91 add x0, x0, #4016
ffff800008eb2d78: 1f 00 00 b9 str wzr, [x0]
ffff800008eb2d7c: bf 23 03 d5 hint #29
ffff800008eb2d80: c0 03 5f d6 ret
main 6728/6728 [0004] 0.000000000 etm4_cs_lock.isra.0.part.0+0x20
# perf script -s scripts/python/arm-cs-trace-disasm.py -- -d objdump -k ./vmlinux
ARM CoreSight Trace Data Assembler Dump
ffff800008eb3310 <etm4_enable_hw+0x178>:
ffff800008eb3310: 350038c0 cbnz w0, ffff800008eb3a28 <etm4_enable_hw+0x890>
ffff800008eb3314: d5033f9f dsb sy
ffff800008eb3318: d5033fdf isb
ffff800008eb331c: a9425bf5 ldp x21, x22, [sp, #32]
ffff800008eb3320: a94573fb ldp x27, x28, [sp, #80]
ffff800008eb3324: 394082e0 ldrb w0, [x23, #32]
ffff800008eb3328: 34000060 cbz w0, ffff800008eb3334 <etm4_enable_hw+0x19c>
ffff800008eb332c: aa1903e0 mov x0, x25
ffff800008eb3330: 97fffe8c bl ffff800008eb2d60 <etm4_cs_lock.isra.0.part.0>
main 6728/6728 [0004] 0.000000000 etm4_enable_hw+0x198 [kernel.kallsyms]
ffff800008eb2d60 <etm4_cs_lock.isra.0.part.0>:
ffff800008eb2d60: d503201f nop
ffff800008eb2d64: d503201f nop
ffff800008eb2d68: d503233f paciasp
ffff800008eb2d6c: f9400000 ldr x0, [x0]
ffff800008eb2d70: d5033f9f dsb sy
ffff800008eb2d74: 913ec000 add x0, x0, #0xfb0
ffff800008eb2d78: b900001f str wzr, [x0]
ffff800008eb2d7c: d50323bf autiasp
ffff800008eb2d80: d65f03c0 ret
main 6728/6728 [0004] 0.000000000 etm4_cs_lock.isra.0.part.0+0x20
Signed-off-by: Leo Yan <[email protected]>
Co-authored-by: Al Grant <[email protected]>
Co-authored-by: Mathieu Poirier <[email protected]>
Co-authored-by: Tor Jeremiassen <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Eelco Chaudron <[email protected]>
Cc: German Gomez <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephen Brennan <[email protected]>
Cc: Tanmay Jagdale <[email protected]>
Cc: [email protected]
Cc: zengshun . wu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
reddysujith
pushed a commit
that referenced
this pull request
Oct 27, 2022
The following has been observed when running stressng mmap since commit b653db7 ("mm: Clear page->private when splitting or migrating a page") watchdog: BUG: soft lockup - CPU#75 stuck for 26s! [stress-ng:9546] CPU: 75 PID: 9546 Comm: stress-ng Tainted: G E 6.0.0-revert-b653db77-fix+ #29 0357d79b60fb09775f678e4f3f64ef0579ad1374 Hardware name: SGI.COM C2112-4GP3/X10DRT-P-Series, BIOS 2.0a 05/09/2016 RIP: 0010:xas_descend+0x28/0x80 Code: cc cc 0f b6 0e 48 8b 57 08 48 d3 ea 83 e2 3f 89 d0 48 83 c0 04 48 8b 44 c6 08 48 89 77 18 48 89 c1 83 e1 03 48 83 f9 02 75 08 <48> 3d fd 00 00 00 76 08 88 57 12 c3 cc cc cc cc 48 c1 e8 02 89 c2 RSP: 0018:ffffbbf02a2236a8 EFLAGS: 00000246 RAX: ffff9cab7d6a0002 RBX: ffffe04b0af88040 RCX: 0000000000000002 RDX: 0000000000000030 RSI: ffff9cab60509b60 RDI: ffffbbf02a2236c0 RBP: 0000000000000000 R08: ffff9cab60509b60 R09: ffffbbf02a2236c0 R10: 0000000000000001 R11: ffffbbf02a223698 R12: 0000000000000000 R13: ffff9cab4e28da80 R14: 0000000000039c01 R15: ffff9cab4e28da88 FS: 00007fab89b85e40(0000) GS:ffff9cea3fcc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fab84e00000 CR3: 00000040b73a4003 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> xas_load+0x3a/0x50 __filemap_get_folio+0x80/0x370 ? put_swap_page+0x163/0x360 pagecache_get_page+0x13/0x90 __try_to_reclaim_swap+0x50/0x190 scan_swap_map_slots+0x31e/0x670 get_swap_pages+0x226/0x3c0 folio_alloc_swap+0x1cc/0x240 add_to_swap+0x14/0x70 shrink_page_list+0x968/0xbc0 reclaim_page_list+0x70/0xf0 reclaim_pages+0xdd/0x120 madvise_cold_or_pageout_pte_range+0x814/0xf30 walk_pgd_range+0x637/0xa30 __walk_page_range+0x142/0x170 walk_page_range+0x146/0x170 madvise_pageout+0xb7/0x280 ? asm_common_interrupt+0x22/0x40 madvise_vma_behavior+0x3b7/0xac0 ? find_vma+0x4a/0x70 ? find_vma+0x64/0x70 ? madvise_vma_anon_name+0x40/0x40 madvise_walk_vmas+0xa6/0x130 do_madvise+0x2f4/0x360 __x64_sys_madvise+0x26/0x30 do_syscall_64+0x5b/0x80 ? do_syscall_64+0x67/0x80 ? syscall_exit_to_user_mode+0x17/0x40 ? do_syscall_64+0x67/0x80 ? syscall_exit_to_user_mode+0x17/0x40 ? do_syscall_64+0x67/0x80 ? do_syscall_64+0x67/0x80 ? common_interrupt+0x8b/0xa0 entry_SYSCALL_64_after_hwframe+0x63/0xcd The problem can be reproduced with the mmtests config config-workload-stressng-mmap. It does not always happen and when it triggers is variable but it has happened on multiple machines. The intent of commit b653db7 patch was to avoid the case where PG_private is clear but folio->private is not-NULL. However, THP tail pages uses page->private for "swp_entry_t if folio_test_swapcache()" as stated in the documentation for struct folio. This patch only clobbers page->private for tail pages if the head page was not in swapcache and warns once if page->private had an unexpected value. Link: https://lkml.kernel.org/r/[email protected] Fixes: b653db7 ("mm: Clear page->private when splitting or migrating a page") Signed-off-by: Mel Gorman <[email protected]> Cc: Matthew Wilcox (Oracle) <[email protected]> Cc: Mel Gorman <[email protected]> Cc: Yang Shi <[email protected]> Cc: Brian Foster <[email protected]> Cc: Dan Streetman <[email protected]> Cc: Miaohe Lin <[email protected]> Cc: Oleksandr Natalenko <[email protected]> Cc: Seth Jennings <[email protected]> Cc: Vitaly Wool <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
plbossart
pushed a commit
that referenced
this pull request
May 3, 2024
As previously explained, the rehash delayed work migrates filters from one region to another. This is done by iterating over all chunks (all the filters with the same priority) in the region and in each chunk iterating over all the filters. When the work runs out of credits it stores the current chunk and entry as markers in the per-work context so that it would know where to resume the migration from the next time the work is scheduled. Upon error, the chunk marker is reset to NULL, but without resetting the entry markers despite being relative to it. This can result in migration being resumed from an entry that does not belong to the chunk being migrated. In turn, this will eventually lead to a chunk being iterated over as if it is an entry. Because of how the two structures happen to be defined, this does not lead to KASAN splats, but to warnings such as [1]. Fix by creating a helper that resets all the markers and call it from all the places the currently only reset the chunk marker. For good measures also call it when starting a completely new rehash. Add a warning to avoid future cases. [1] WARNING: CPU: 7 PID: 1076 at drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_keys.c:407 mlxsw_afk_encode+0x242/0x2f0 Modules linked in: CPU: 7 PID: 1076 Comm: kworker/7:24 Tainted: G W 6.9.0-rc3-custom-00880-g29e61d91b77b #29 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_afk_encode+0x242/0x2f0 [...] Call Trace: <TASK> mlxsw_sp_acl_atcam_entry_add+0xd9/0x3c0 mlxsw_sp_acl_tcam_entry_create+0x5e/0xa0 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x109/0x290 mlxsw_sp_acl_tcam_vregion_rehash_work+0x6c/0x470 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 </TASK> Fixes: 6f9579d ("mlxsw: spectrum_acl: Remember where to continue rehash migration") Signed-off-by: Ido Schimmel <[email protected]> Tested-by: Alexander Zubkov <[email protected]> Reviewed-by: Petr Machata <[email protected]> Signed-off-by: Petr Machata <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/cc17eed86b41dd829d39b07906fec074a9ce580e.1713797103.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <[email protected]>
plbossart
pushed a commit
that referenced
this pull request
May 29, 2024
Reinitialize the whole EST structure would also reset the mutex lock which is embedded in the EST structure, and then trigger the following warning. To address this, move the lock to struct stmmac_priv. We also need to reacquire the mutex lock when doing this initialization. DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: CPU: 3 PID: 505 at kernel/locking/mutex.c:587 __mutex_lock+0xd84/0x1068 Modules linked in: CPU: 3 PID: 505 Comm: tc Not tainted 6.9.0-rc6-00053-g0106679839f7-dirty #29 Hardware name: NXP i.MX8MPlus EVK board (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __mutex_lock+0xd84/0x1068 lr : __mutex_lock+0xd84/0x1068 sp : ffffffc0864e3570 x29: ffffffc0864e3570 x28: ffffffc0817bdc78 x27: 0000000000000003 x26: ffffff80c54f1808 x25: ffffff80c9164080 x24: ffffffc080d723ac x23: 0000000000000000 x22: 0000000000000002 x21: 0000000000000000 x20: 0000000000000000 x19: ffffffc083bc3000 x18: ffffffffffffffff x17: ffffffc08117b080 x16: 0000000000000002 x15: ffffff80d2d40000 x14: 00000000000002da x13: ffffff80d2d404b8 x12: ffffffc082b5a5c8 x11: ffffffc082bca680 x10: ffffffc082bb2640 x9 : ffffffc082bb2698 x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000000001 x5 : ffffff8178fe0d48 x4 : 0000000000000000 x3 : 0000000000000027 x2 : ffffff8178fe0d50 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: __mutex_lock+0xd84/0x1068 mutex_lock_nested+0x28/0x34 tc_setup_taprio+0x118/0x68c stmmac_setup_tc+0x50/0xf0 taprio_change+0x868/0xc9c Fixes: b2aae65 ("net: stmmac: add mutex lock to protect est parameters") Signed-off-by: Xiaolei Wang <[email protected]> Reviewed-by: Simon Horman <[email protected]> Reviewed-by: Serge Semin <[email protected]> Reviewed-by: Andrew Halaney <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
plbossart
pushed a commit
that referenced
this pull request
Jun 12, 2024
cpumask_of_node() can be called for NUMA_NO_NODE inside do_map_benchmark() resulting in the following sanitizer report: UBSAN: array-index-out-of-bounds in ./arch/x86/include/asm/topology.h:72:28 index -1 is out of range for type 'cpumask [64][1]' CPU: 1 PID: 990 Comm: dma_map_benchma Not tainted 6.9.0-rc6 #29 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:117) ubsan_epilogue (lib/ubsan.c:232) __ubsan_handle_out_of_bounds (lib/ubsan.c:429) cpumask_of_node (arch/x86/include/asm/topology.h:72) [inline] do_map_benchmark (kernel/dma/map_benchmark.c:104) map_benchmark_ioctl (kernel/dma/map_benchmark.c:246) full_proxy_unlocked_ioctl (fs/debugfs/file.c:333) __x64_sys_ioctl (fs/ioctl.c:890) do_syscall_64 (arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Use cpumask_of_node() in place when binding a kernel thread to a cpuset of a particular node. Note that the provided node id is checked inside map_benchmark_ioctl(). It's just a NUMA_NO_NODE case which is not handled properly later. Found by Linux Verification Center (linuxtesting.org). Fixes: 65789da ("dma-mapping: add benchmark support for streaming DMA APIs") Signed-off-by: Fedor Pchelkin <[email protected]> Acked-by: Barry Song <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
This patch tries to enable msi for sof hda audio driver.
If it fails (not supported by HW/BIOS), it will use the
legacy interrupt mode.
Signed-off-by: Libin Yang [email protected]