Fix IPC timeout issue on APL&CNL #28

RanderWang · 2018-07-06T09:52:53Z

I fix merge conflict issue on latest code

The IPC algorithm depends on the status of snd_sof_ipc_reply. The failed case is processed different with success one Signed-off-by: Rander Wang <[email protected]>

There are two direction now in cmd_done, one is reply of host to DSP, another is reply of DSP to host.The origin cmd_done is for reply of host to DSP. Cmd_done should be called after host has processed the reply msg from dsp. This function is for some platforms to do extra steps to make the following ipc msgs sent safely. Now the direction supported by cmd_done would be host reply to dsp or dsp reply to host. Signed-off-by: Rander Wang <[email protected]>

Refine the implementation of is_dsp_ready on APL&CNL BUSY bit means dsp is ready, DONE bit means host has processed the reply msg. The next ipc msg should check both bits to make sure both dsp and host is ready Signed-off-by: Rander Wang <[email protected]> Signed-off-by: Liam Girdwood <[email protected]>

plbossart

Please fix multi-line comment issues.
Also please explain what you do with the results from snd_sof_ipc_reply(). It looks like you are executing the test cases only when there is an error, not sure if this is really what you intended - or the comments are not self-explanatory

plbossart · 2018-07-09T18:44:52Z

sound/soc/sof/intel/hda-ipc.c

@@ -38,10 +38,24 @@ int hda_dsp_ipc_cmd_done(struct snd_sof_dev *sdev, int dir)
 {
 	if (dir == SOF_IPC_HOST_REPLY) {
 		/* tell DSP cmd is done - clear busy interrupt */


nit-pick: fix multi-line comments

plbossart · 2018-07-09T18:45:15Z

sound/soc/sof/intel/hda-ipc.c

 		snd_sof_dsp_update_bits_forced(sdev, HDA_DSP_BAR,
 					       HDA_DSP_REG_HIPCT,
 					       HDA_DSP_REG_HIPCT_BUSY,
 					       HDA_DSP_REG_HIPCT_BUSY);
+	} else {
+		/* set DONE bit - tell DSP we have received the reply msg */


comment style here as well

plbossart · 2018-07-09T18:47:25Z

sound/soc/sof/intel/hda-ipc.c

@@ -113,6 +127,7 @@ irqreturn_t hda_dsp_ipc_irq_thread(int irq, void *context)
 	struct snd_sof_dev *sdev = (struct snd_sof_dev *)context;
 	u32 hipci, hipcie, hipct, hipcte, msg = 0, msg_ext = 0;
 	irqreturn_t ret = IRQ_NONE;
+	int reply = 1;


snd_soc_ipc_reply returns 0 or -EINVAL, the 1 isn't incorrect but misleading. Change to -EINVAL for consistency?

I will change it to -EINVAL

plbossart · 2018-07-09T18:48:22Z

sound/soc/sof/intel/hda-ipc.c

+		/* handle immediate reply from DSP core. If the msg is */
+		/* found, set done bit in reply_done, else set it here */
+		if (reply)
+			hda_dsp_ipc_cmd_done(sdev, SOF_IPC_DSP_REPLY);


is this what you want to do when the reply is -EINVAL?

yes, if the return value is 0, the cmd_done would be called at the end of msg processing function.
But if is -EINVAL, no msg processing function would be called, so it could be called at here to make interrupt status correct in dsp

plbossart · 2018-07-09T18:49:00Z

sound/soc/sof/intel/cnl.c

-					CNL_DSP_REG_HIPCCTL,
-					CNL_DSP_REG_HIPCCTL_DONE,
-					CNL_DSP_REG_HIPCCTL_DONE);
+		/* handle immediate reply from DSP core. If the msg is */


multiline-comments

i will refine it

plbossart · 2018-07-09T18:53:52Z

sound/soc/sof/intel/cnl.c

-					CNL_DSP_REG_HIPCCTL_DONE);
+		/* handle immediate reply from DSP core. If the msg is */
+		/* found, set done bit in reply_done, else set it here */
+		if (snd_sof_ipc_reply(sdev, msg))


same comment as for APL, this is done when the snd_soc_ipc_reply returns -EINVAL, is this intentional?

yes, it is for unknown msgs

plbossart · 2018-07-09T18:54:16Z

sound/soc/sof/intel/cnl.c

 		snd_sof_dsp_update_bits_forced(sdev, HDA_DSP_BAR,
 					       CNL_DSP_REG_HIPCTDA,
 					       CNL_DSP_REG_HIPCTDA_DONE,
 					       CNL_DSP_REG_HIPCTDA_DONE);
+	} else {
+		/* set DONE bit - tell DSP we have received the reply msg */


multi-line comments

I will refine it

plbossart · 2018-07-09T18:56:58Z

sound/soc/sof/intel/hsw.c

-		/* unmask Done interrupt */
-		snd_sof_dsp_update_bits_unlocked(sdev, HSW_DSP_BAR, SHIM_IMRX,
-						 SHIM_IMRX_DONE, 0);
+		/* handle immediate reply from DSP core. If the msg is */


multi-line comments

I will refine it

plbossart · 2018-07-09T18:57:08Z

sound/soc/sof/intel/hsw.c

-		snd_sof_dsp_update_bits_unlocked(sdev, HSW_DSP_BAR, SHIM_IMRX,
-						 SHIM_IMRX_DONE, 0);
+		/* handle immediate reply from DSP core. If the msg is */
+		/* found, set done bit in reply_done, else set it here */


multi-line comments

I will refine it

plbossart · 2018-07-09T18:58:31Z

sound/soc/sof/intel/byt.c

-		/* unmask Done interrupt */
-		snd_sof_dsp_update_bits64_unlocked(sdev, BYT_DSP_BAR, SHIM_IMRX,
-						   SHIM_IMRX_DONE, 0);
+		/* handle immediate reply from DSP core. If the msg is */


multi-line comments

I will refine it

RanderWang · 2018-07-10T06:25:18Z

I update my patches. Why I change snd_sof_ipc_reply(), just have a look at following section.

When host receive reply messages from dsp, the done bit should be set. Before my change, it is set in IRQ function. Now I move it to cmd_done function which is called at end of message processing function. In some cases, unknown message is gotten in IRQ function and no message processing function is called for this message. So done bit can't be set in cmd_done function, and it could only be set in IRQ function

Set DONE bit in cmd_done function which processes msgs, rather than doing it in IRQ function. But if a msg is not in the rx list, it can only be done at IRQ function Signed-off-by: Rander Wang <[email protected]>

Set DONE bit in cmd_done function if direction is DSP_REPLY rather than doing it in IRQ function. But if a msg is not in the rx list, it can only be done at IRQ function Signed-off-by: Rander Wang <[email protected]>

(1) Set DONE bit in cmd_done function which processes msgs, rather than doing it in IRQ function. But if a msg is not in the rx list, it can only be done at IRQ function (2) Check DONE bit in hsw_is_ready function Signed-off-by: Rander Wang <[email protected]>

(1) Set DONE bit in cmd_done function which processes msgs, rather than doing it in IRQ function. But if a msg is not in the rx list, it can only be done at IRQ function (2) Check DONE bit in bdw_is_ready function Signed-off-by: Rander Wang <[email protected]>

(1) Set DONE bit in cmd_done function which processes msgs, rather than doing it in IRQ function. But if a msg is not in the rx list, it can only be done at IRQ function (2) Check DONE bit in byt_is_ready function Signed-off-by: Rander Wang <[email protected]>

plbossart

Sorry, I still don't get why in the APL case you ignore the ROM messages and in CNL you don't?

I am referring to this code in hda-ipc.c:
if (msg != 0x1004000)
reply = snd_sof_ipc_reply(sdev, msg);

which isn't present for CNL

RanderWang · 2018-07-11T01:50:37Z

The code if(msg != 0x1004000) is added by Keyon. Because at boot up time, ROM send a reply msg to host, but host cant found it , so a error msg would be in dmesg. Customer complaint about error msg on APL . So Keyon did this on APL.

RanderWang · 2018-07-11T01:56:42Z

For ROM messages on CNL & APL, both would call cmd_done in IRQ function. For ROM messages on
CNL, the snd_sof_ipc_reply would return -EINVL, the cmd_done would be called. On APL, For ROM messages 0x1004000, cmd_done would called for reply = -EINVL, and other ROM msgs work as on CNL. So no difference.

plbossart · 2018-07-11T15:49:39Z

@RanderWang I did not understand your explanations at all... I was asking why there is a difference between two platforms that are mostly identical, and you didn't give me the root cause.

Anyway, I will merge this since it's been dragging for a long-time and I am tired of this thread, but be prepared for a revert if this introduces problems.

Applying dynamic usbcore quirks in early booting when the slab is not yet ready would cause kernel panic of null pointer dereference because the quirk_count has been counted as 1 while the quirk_list was failed to allocate. i.e., [ 1.044970] BUG: unable to handle kernel NULL pointer dereference at (null) [ 1.044995] IP: [<ffffffffb0953ec7>] usb_detect_quirks+0x88/0xd1 [ 1.045016] PGD 0 [ 1.045026] Oops: 0000 [#1] PREEMPT SMP [ 1.046986] gsmi: Log Shutdown Reason 0x03 [ 1.046995] Modules linked in: [ 1.047008] CPU: 0 PID: 81 Comm: kworker/0:3 Not tainted 4.4.154 #28 [ 1.047016] Hardware name: Google Coral/Coral, BIOS Google_Coral.10068.27.0 12/04/2017 [ 1.047028] Workqueue: usb_hub_wq hub_event [ 1.047037] task: ffff88017a321c80 task.stack: ffff88017a384000 [ 1.047044] RIP: 0010:[<ffffffffb0953ec7>] [<ffffffffb0953ec7>] usb_detect_quirks+0x88/0xd1 To tackle this odd, let's balance the quirk_count to 0 when the kcalloc call fails, and defer the quirk setting into a lower level callback which ensures that the kernel memory management has been initialized. Fixes: 027bd6c ("usb: core: Add "quirks" parameter for usbcore") Signed-off-by: Harry Pan <[email protected]> Acked-by: Kai-Heng Feng <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

If alloc_workqueue fails in alua_init, it should return -ENOMEM, otherwise it will trigger null-ptr-deref while unloading module which calls destroy_workqueue dereference wq->lock like this: BUG: KASAN: null-ptr-deref in __lock_acquire+0x6b4/0x1ee0 Read of size 8 at addr 0000000000000080 by task syz-executor.0/7045 CPU: 0 PID: 7045 Comm: syz-executor.0 Tainted: G C 5.1.0+ #28 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 Call Trace: dump_stack+0xa9/0x10e __kasan_report+0x171/0x18d ? __lock_acquire+0x6b4/0x1ee0 kasan_report+0xe/0x20 __lock_acquire+0x6b4/0x1ee0 lock_acquire+0xb4/0x1b0 __mutex_lock+0xd8/0xb90 drain_workqueue+0x25/0x290 destroy_workqueue+0x1f/0x3f0 __x64_sys_delete_module+0x244/0x330 do_syscall_64+0x72/0x2a0 entry_SYSCALL_64_after_hwframe+0x49/0xbe Reported-by: Hulk Robot <[email protected]> Fixes: 03197b6 ("scsi_dh_alua: Use workqueue for RTPG") Signed-off-by: YueHaibing <[email protected]> Reviewed-by: Bart Van Assche <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>

If spi_register_master fails in spi_bitbang_start because device_add failure, We should return the error code other than 0, otherwise calling spi_bitbang_stop may trigger NULL pointer dereference like this: BUG: KASAN: null-ptr-deref in __list_del_entry_valid+0x45/0xd0 Read of size 8 at addr 0000000000000000 by task syz-executor.0/3661 CPU: 0 PID: 3661 Comm: syz-executor.0 Not tainted 5.1.0+ thesofproject#28 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: dump_stack+0xa9/0x10e ? __list_del_entry_valid+0x45/0xd0 ? __list_del_entry_valid+0x45/0xd0 __kasan_report+0x171/0x18d ? __list_del_entry_valid+0x45/0xd0 kasan_report+0xe/0x20 __list_del_entry_valid+0x45/0xd0 spi_unregister_controller+0x99/0x1b0 spi_lm70llp_attach+0x3ae/0x4b0 [spi_lm70llp] ? 0xffffffffc1128000 ? klist_next+0x131/0x1e0 ? driver_detach+0x40/0x40 [parport] port_check+0x3b/0x50 [parport] bus_for_each_dev+0x115/0x180 ? subsys_dev_iter_exit+0x20/0x20 __parport_register_driver+0x1f0/0x210 [parport] ? 0xffffffffc1150000 do_one_initcall+0xb9/0x3b5 ? perf_trace_initcall_level+0x270/0x270 ? kasan_unpoison_shadow+0x30/0x40 ? kasan_unpoison_shadow+0x30/0x40 do_init_module+0xe0/0x330 load_module+0x38eb/0x4270 ? module_frob_arch_sections+0x20/0x20 ? kernel_read_file+0x188/0x3f0 ? find_held_lock+0x6d/0xd0 ? fput_many+0x1a/0xe0 ? __do_sys_finit_module+0x162/0x190 __do_sys_finit_module+0x162/0x190 ? __ia32_sys_init_module+0x40/0x40 ? __mutex_unlock_slowpath+0xb4/0x3f0 ? wait_for_completion+0x240/0x240 ? vfs_write+0x160/0x2a0 ? lockdep_hardirqs_off+0xb5/0x100 ? mark_held_locks+0x1a/0x90 ? do_syscall_64+0x14/0x2a0 do_syscall_64+0x72/0x2a0 entry_SYSCALL_64_after_hwframe+0x49/0xbe Reported-by: Hulk Robot <[email protected]> Fixes: 702a487 ("spi: bitbang: Let spi_bitbang_start() take a reference to master") Signed-off-by: YueHaibing <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Axel Lin <[email protected]> Reviewed-by: Mukesh Ojha <[email protected]> Signed-off-by: Mark Brown <[email protected]>

[ Upstream commit 12e750b ] If alloc_workqueue fails in alua_init, it should return -ENOMEM, otherwise it will trigger null-ptr-deref while unloading module which calls destroy_workqueue dereference wq->lock like this: BUG: KASAN: null-ptr-deref in __lock_acquire+0x6b4/0x1ee0 Read of size 8 at addr 0000000000000080 by task syz-executor.0/7045 CPU: 0 PID: 7045 Comm: syz-executor.0 Tainted: G C 5.1.0+ thesofproject#28 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 Call Trace: dump_stack+0xa9/0x10e __kasan_report+0x171/0x18d ? __lock_acquire+0x6b4/0x1ee0 kasan_report+0xe/0x20 __lock_acquire+0x6b4/0x1ee0 lock_acquire+0xb4/0x1b0 __mutex_lock+0xd8/0xb90 drain_workqueue+0x25/0x290 destroy_workqueue+0x1f/0x3f0 __x64_sys_delete_module+0x244/0x330 do_syscall_64+0x72/0x2a0 entry_SYSCALL_64_after_hwframe+0x49/0xbe Reported-by: Hulk Robot <[email protected]> Fixes: 03197b6 ("scsi_dh_alua: Use workqueue for RTPG") Signed-off-by: YueHaibing <[email protected]> Reviewed-by: Bart Van Assche <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

Commit d91bff3 ("proc/sysctl: add shared variables for range check") adds some shared const variables to be used instead of a local copy in each source file. Warn when a chunk duplicates one of these values in a ctl_table struct: $ scripts/checkpatch.pl 0001-test-commit.patch WARNING: duplicated sysctl range checking value 'zero', consider using the shared one in include/linux/sysctl.h thesofproject#27: FILE: arch/arm/kernel/isa.c:48: + .extra1 = &zero, WARNING: duplicated sysctl range checking value 'int_max', consider using the shared one in include/linux/sysctl.h thesofproject#28: FILE: arch/arm/kernel/isa.c:49: + .extra2 = &int_max, total: 0 errors, 2 warnings, 14 lines checked Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Matteo Croce <[email protected]> Reviewed-by: Kees Cook <[email protected]> Cc: Joe Perches <[email protected]> Cc: Aaron Tomlin <[email protected]> Cc: Matthew Wilcox <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>

We should not trigger a warning when a memory allocation fails. Remove the WARN_ON(). The warning is constantly triggered by syzkaller when it is injecting faults: [ 2230.758664] FAULT_INJECTION: forcing a failure. [ 2230.758664] name failslab, interval 1, probability 0, space 0, times 0 [ 2230.762329] CPU: 3 PID: 1407 Comm: syz-executor.0 Not tainted 5.8.0-rc2+ #28 ... [ 2230.898175] WARNING: CPU: 3 PID: 1407 at drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:6265 mlxsw_sp_router_fib_event+0xfad/0x13e0 [ 2230.898179] Kernel panic - not syncing: panic_on_warn set ... [ 2230.898183] CPU: 3 PID: 1407 Comm: syz-executor.0 Not tainted 5.8.0-rc2+ #28 [ 2230.898190] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Fixes: 3057224 ("mlxsw: spectrum_router: Implement FIB offload in deferred work") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>

[ Upstream commit 96298f6 ] According to Core Spec Version 5.2 | Vol 3, Part A 6.1.5, the incoming L2CAP_ConfigReq should be handled during OPEN state. The section below shows the btmon trace when running L2CAP/COS/CFD/BV-12-C before and after this change. === Before === ... > ACL Data RX: Handle 256 flags 0x02 dlen 12 thesofproject#22 L2CAP: Connection Request (0x02) ident 2 len 4 PSM: 1 (0x0001) Source CID: 65 < ACL Data TX: Handle 256 flags 0x00 dlen 16 thesofproject#23 L2CAP: Connection Response (0x03) ident 2 len 8 Destination CID: 64 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 256 flags 0x00 dlen 12 thesofproject#24 L2CAP: Configure Request (0x04) ident 2 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 thesofproject#25 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 thesofproject#26 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 16 thesofproject#27 L2CAP: Configure Request (0x04) ident 3 len 8 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 .. < ACL Data TX: Handle 256 flags 0x00 dlen 18 thesofproject#28 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 > HCI Event: Number of Completed Packets (0x13) plen 5 thesofproject#29 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 14 thesofproject#30 L2CAP: Configure Response (0x05) ident 2 len 6 Source CID: 64 Flags: 0x0000 Result: Success (0x0000) > ACL Data RX: Handle 256 flags 0x02 dlen 20 thesofproject#31 L2CAP: Configure Request (0x04) ident 3 len 12 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 91 02 11 11 ...... < ACL Data TX: Handle 256 flags 0x00 dlen 14 thesofproject#32 L2CAP: Command Reject (0x01) ident 3 len 6 Reason: Invalid CID in request (0x0002) Destination CID: 64 Source CID: 65 > HCI Event: Number of Completed Packets (0x13) plen 5 thesofproject#33 Num handles: 1 Handle: 256 Count: 1 ... === After === ... > ACL Data RX: Handle 256 flags 0x02 dlen 12 thesofproject#22 L2CAP: Connection Request (0x02) ident 2 len 4 PSM: 1 (0x0001) Source CID: 65 < ACL Data TX: Handle 256 flags 0x00 dlen 16 thesofproject#23 L2CAP: Connection Response (0x03) ident 2 len 8 Destination CID: 64 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 256 flags 0x00 dlen 12 thesofproject#24 L2CAP: Configure Request (0x04) ident 2 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 thesofproject#25 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 thesofproject#26 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 16 thesofproject#27 L2CAP: Configure Request (0x04) ident 3 len 8 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 .. < ACL Data TX: Handle 256 flags 0x00 dlen 18 thesofproject#28 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 > HCI Event: Number of Completed Packets (0x13) plen 5 thesofproject#29 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 14 thesofproject#30 L2CAP: Configure Response (0x05) ident 2 len 6 Source CID: 64 Flags: 0x0000 Result: Success (0x0000) > ACL Data RX: Handle 256 flags 0x02 dlen 20 thesofproject#31 L2CAP: Configure Request (0x04) ident 3 len 12 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 91 02 11 11 ..... < ACL Data TX: Handle 256 flags 0x00 dlen 18 thesofproject#32 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 < ACL Data TX: Handle 256 flags 0x00 dlen 12 thesofproject#33 L2CAP: Configure Request (0x04) ident 3 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 thesofproject#34 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 thesofproject#35 Num handles: 1 Handle: 256 Count: 1 ... Signed-off-by: Howard Chung <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

Forbid rustc from using -f{function,data}-sections (fixes thesofproject#20 panic)

…xtent When cloning an inline extent there are a few cases, such as when we have an implicit hole at file offset 0, where we start a transaction while holding a read lock on a leaf. Starting the transaction results in a call to sb_start_intwrite(), which results in doing a read lock on a percpu semaphore. Lockdep doesn't like this and complains about it: [46.580704] ====================================================== [46.580752] WARNING: possible circular locking dependency detected [46.580799] 5.13.0-rc1 #28 Not tainted [46.580832] ------------------------------------------------------ [46.580877] cloner/3835 is trying to acquire lock: [46.580918] c00000001301d638 (sb_internal#2){.+.+}-{0:0}, at: clone_copy_inline_extent+0xe4/0x5a0 [46.581167] [46.581167] but task is already holding lock: [46.581217] c000000007fa2550 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x70/0x1d0 [46.581293] [46.581293] which lock already depends on the new lock. [46.581293] [46.581351] [46.581351] the existing dependency chain (in reverse order) is: [46.581410] [46.581410] -> #1 (btrfs-tree-00){++++}-{3:3}: [46.581464] down_read_nested+0x68/0x200 [46.581536] __btrfs_tree_read_lock+0x70/0x1d0 [46.581577] btrfs_read_lock_root_node+0x88/0x200 [46.581623] btrfs_search_slot+0x298/0xb70 [46.581665] btrfs_set_inode_index+0xfc/0x260 [46.581708] btrfs_new_inode+0x26c/0x950 [46.581749] btrfs_create+0xf4/0x2b0 [46.581782] lookup_open.isra.57+0x55c/0x6a0 [46.581855] path_openat+0x418/0xd20 [46.581888] do_filp_open+0x9c/0x130 [46.581920] do_sys_openat2+0x2ec/0x430 [46.581961] do_sys_open+0x90/0xc0 [46.581993] system_call_exception+0x3d4/0x410 [46.582037] system_call_common+0xec/0x278 [46.582078] [46.582078] -> #0 (sb_internal#2){.+.+}-{0:0}: [46.582135] __lock_acquire+0x1e90/0x2c50 [46.582176] lock_acquire+0x2b4/0x5b0 [46.582263] start_transaction+0x3cc/0x950 [46.582308] clone_copy_inline_extent+0xe4/0x5a0 [46.582353] btrfs_clone+0x5fc/0x880 [46.582388] btrfs_clone_files+0xd8/0x1c0 [46.582434] btrfs_remap_file_range+0x3d8/0x590 [46.582481] do_clone_file_range+0x10c/0x270 [46.582558] vfs_clone_file_range+0x1b0/0x310 [46.582605] ioctl_file_clone+0x90/0x130 [46.582651] do_vfs_ioctl+0x874/0x1ac0 [46.582697] sys_ioctl+0x6c/0x120 [46.582733] system_call_exception+0x3d4/0x410 [46.582777] system_call_common+0xec/0x278 [46.582822] [46.582822] other info that might help us debug this: [46.582822] [46.582888] Possible unsafe locking scenario: [46.582888] [46.582942] CPU0 CPU1 [46.582984] ---- ---- [46.583028] lock(btrfs-tree-00); [46.583062] lock(sb_internal#2); [46.583119] lock(btrfs-tree-00); [46.583174] lock(sb_internal#2); [46.583212] [46.583212] *** DEADLOCK *** [46.583212] [46.583266] 6 locks held by cloner/3835: [46.583299] #0: c00000001301d448 (sb_writers#12){.+.+}-{0:0}, at: ioctl_file_clone+0x90/0x130 [46.583382] #1: c00000000f6d3768 (&sb->s_type->i_mutex_key#15){+.+.}-{3:3}, at: lock_two_nondirectories+0x58/0xc0 [46.583477] #2: c00000000f6d72a8 (&sb->s_type->i_mutex_key#15/4){+.+.}-{3:3}, at: lock_two_nondirectories+0x9c/0xc0 [46.583574] #3: c00000000f6d7138 (&ei->i_mmap_lock){+.+.}-{3:3}, at: btrfs_remap_file_range+0xd0/0x590 [46.583657] #4: c00000000f6d35f8 (&ei->i_mmap_lock/1){+.+.}-{3:3}, at: btrfs_remap_file_range+0xe0/0x590 [46.583743] #5: c000000007fa2550 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x70/0x1d0 [46.583828] [46.583828] stack backtrace: [46.583872] CPU: 1 PID: 3835 Comm: cloner Not tainted 5.13.0-rc1 #28 [46.583931] Call Trace: [46.583955] [c0000000167c7200] [c000000000c1ee78] dump_stack+0xec/0x144 (unreliable) [46.584052] [c0000000167c7240] [c000000000274058] print_circular_bug.isra.32+0x3a8/0x400 [46.584123] [c0000000167c72e0] [c0000000002741f4] check_noncircular+0x144/0x190 [46.584191] [c0000000167c73b0] [c000000000278fc0] __lock_acquire+0x1e90/0x2c50 [46.584259] [c0000000167c74f0] [c00000000027aa94] lock_acquire+0x2b4/0x5b0 [46.584317] [c0000000167c75e0] [c000000000a0d6cc] start_transaction+0x3cc/0x950 [46.584388] [c0000000167c7690] [c000000000af47a4] clone_copy_inline_extent+0xe4/0x5a0 [46.584457] [c0000000167c77c0] [c000000000af525c] btrfs_clone+0x5fc/0x880 [46.584514] [c0000000167c7990] [c000000000af5698] btrfs_clone_files+0xd8/0x1c0 [46.584583] [c0000000167c7a00] [c000000000af5b58] btrfs_remap_file_range+0x3d8/0x590 [46.584652] [c0000000167c7ae0] [c0000000005d81dc] do_clone_file_range+0x10c/0x270 [46.584722] [c0000000167c7b40] [c0000000005d84f0] vfs_clone_file_range+0x1b0/0x310 [46.584793] [c0000000167c7bb0] [c00000000058bf80] ioctl_file_clone+0x90/0x130 [46.584861] [c0000000167c7c10] [c00000000058c894] do_vfs_ioctl+0x874/0x1ac0 [46.584922] [c0000000167c7d10] [c00000000058db4c] sys_ioctl+0x6c/0x120 [46.584978] [c0000000167c7d60] [c0000000000364a4] system_call_exception+0x3d4/0x410 [46.585046] [c0000000167c7e10] [c00000000000d45c] system_call_common+0xec/0x278 [46.585114] --- interrupt: c00 at 0x7ffff7e22990 [46.585160] NIP: 00007ffff7e22990 LR: 00000001000010ec CTR: 0000000000000000 [46.585224] REGS: c0000000167c7e80 TRAP: 0c00 Not tainted (5.13.0-rc1) [46.585280] MSR: 800000000280f033 <SF,VEC,VSX,EE,PR,FP,ME,IR,DR,RI,LE> CR: 28000244 XER: 00000000 [46.585374] IRQMASK: 0 [46.585374] GPR00: 0000000000000036 00007fffffffdec0 00007ffff7f17100 0000000000000004 [46.585374] GPR04: 000000008020940d 00007fffffffdf40 0000000000000000 0000000000000000 [46.585374] GPR08: 0000000000000004 0000000000000000 0000000000000000 0000000000000000 [46.585374] GPR12: 0000000000000000 00007ffff7ffa940 0000000000000000 0000000000000000 [46.585374] GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [46.585374] GPR20: 0000000000000000 000000009123683e 00007fffffffdf40 0000000000000000 [46.585374] GPR24: 0000000000000000 0000000000000000 0000000000000000 0000000000000004 [46.585374] GPR28: 0000000100030260 0000000100030280 0000000000000003 000000000000005f [46.585919] NIP [00007ffff7e22990] 0x7ffff7e22990 [46.585964] LR [00000001000010ec] 0x1000010ec [46.586010] --- interrupt: c00 This should be a false positive, as both locks are acquired in read mode. Nevertheless, we don't need to hold a leaf locked when we start the transaction, so just release the leaf (path) before starting it. Reported-by: Ritesh Harjani <[email protected]> Link: https://lore.kernel.org/linux-btrfs/20210513214404.xks77p566fglzgum@riteshh-domain/ Reviewed-by: Anand Jain <[email protected]> Signed-off-by: Filipe Manana <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>

kasan detects access beyond the end of the xibm->bitmap allocation: BUG: KASAN: slab-out-of-bounds in _find_first_zero_bit+0x40/0x140 Read of size 8 at addr c00000001d1d0118 by task swapper/0/1 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.19.0-rc2-00001-g90df023b36dd #28 Call Trace: [c00000001d98f770] [c0000000012baab8] dump_stack_lvl+0xac/0x108 (unreliable) [c00000001d98f7b0] [c00000000068faac] print_report+0x37c/0x710 [c00000001d98f880] [c0000000006902c0] kasan_report+0x110/0x354 [c00000001d98f950] [c000000000692324] __asan_load8+0xa4/0xe0 [c00000001d98f970] [c0000000011c6ed0] _find_first_zero_bit+0x40/0x140 [c00000001d98f9b0] [c0000000000dbfbc] xive_spapr_get_ipi+0xcc/0x260 [c00000001d98fa70] [c0000000000d6d28] xive_setup_cpu_ipi+0x1e8/0x450 [c00000001d98fb30] [c000000004032a20] pSeries_smp_probe+0x5c/0x118 [c00000001d98fb60] [c000000004018b44] smp_prepare_cpus+0x944/0x9ac [c00000001d98fc90] [c000000004009f9c] kernel_init_freeable+0x2d4/0x640 [c00000001d98fd90] [c0000000000131e8] kernel_init+0x28/0x1d0 [c00000001d98fe10] [c00000000000cd54] ret_from_kernel_thread+0x5c/0x64 Allocated by task 0: kasan_save_stack+0x34/0x70 __kasan_kmalloc+0xb4/0xf0 __kmalloc+0x268/0x540 xive_spapr_init+0x4d0/0x77c pseries_init_irq+0x40/0x27c init_IRQ+0x44/0x84 start_kernel+0x2a4/0x538 start_here_common+0x1c/0x20 The buggy address belongs to the object at c00000001d1d0118 which belongs to the cache kmalloc-8 of size 8 The buggy address is located 0 bytes inside of 8-byte region [c00000001d1d0118, c00000001d1d0120) The buggy address belongs to the physical page: page:c00c000000074740 refcount:1 mapcount:0 mapping:0000000000000000 index:0xc00000001d1d0558 pfn:0x1d1d flags: 0x7ffff000000200(slab|node=0|zone=0|lastcpupid=0x7ffff) raw: 007ffff000000200 c00000001d0003c8 c00000001d0003c8 c00000001d010480 raw: c00000001d1d0558 0000000001e1000a 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: c00000001d1d0000: fc 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc c00000001d1d0080: fc fc 00 fc fc fc fc fc fc fc fc fc fc fc fc fc >c00000001d1d0100: fc fc fc 02 fc fc fc fc fc fc fc fc fc fc fc fc ^ c00000001d1d0180: fc fc fc fc 04 fc fc fc fc fc fc fc fc fc fc fc c00000001d1d0200: fc fc fc fc fc 04 fc fc fc fc fc fc fc fc fc fc This happens because the allocation uses the wrong unit (bits) when it should pass (BITS_TO_LONGS(count) * sizeof(long)) or equivalent. With small numbers of bits, the allocated object can be smaller than sizeof(long), which results in invalid accesses. Use bitmap_zalloc() to allocate and initialize the irq bitmap, paired with bitmap_free() for consistency. Signed-off-by: Nathan Lynch <[email protected]> Reviewed-by: Cédric Le Goater <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]

This fixes the following trace which is caused by hci_rx_work starting up *after* the final channel reference has been put() during sock_close() but *before* the references to the channel have been destroyed, so instead the code now rely on kref_get_unless_zero/l2cap_chan_hold_unless_zero to prevent referencing a channel that is about to be destroyed. refcount_t: increment on 0; use-after-free. BUG: KASAN: use-after-free in refcount_dec_and_test+0x20/0xd0 Read of size 4 at addr ffffffc114f5bf18 by task kworker/u17:14/705 CPU: 4 PID: 705 Comm: kworker/u17:14 Tainted: G S W 4.14.234-00003-g1fb6d0bd49a4-dirty #28 Hardware name: Qualcomm Technologies, Inc. SM8150 V2 PM8150 Google Inc. MSM sm8150 Flame DVT (DT) Workqueue: hci0 hci_rx_work Call trace: dump_backtrace+0x0/0x378 show_stack+0x20/0x2c dump_stack+0x124/0x148 print_address_description+0x80/0x2e8 __kasan_report+0x168/0x188 kasan_report+0x10/0x18 __asan_load4+0x84/0x8c refcount_dec_and_test+0x20/0xd0 l2cap_chan_put+0x48/0x12c l2cap_recv_frame+0x4770/0x6550 l2cap_recv_acldata+0x44c/0x7a4 hci_acldata_packet+0x100/0x188 hci_rx_work+0x178/0x23c process_one_work+0x35c/0x95c worker_thread+0x4cc/0x960 kthread+0x1a8/0x1c4 ret_from_fork+0x10/0x18 Cc: [email protected] Reported-by: Lee Jones <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Tested-by: Lee Jones <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>

The assumption in __disable_kprobe() is wrong, and it could try to disarm an already disarmed kprobe and fire the WARN_ONCE() below. [0] We can easily reproduce this issue. 1. Write 0 to /sys/kernel/debug/kprobes/enabled. # echo 0 > /sys/kernel/debug/kprobes/enabled 2. Run execsnoop. At this time, one kprobe is disabled. # /usr/share/bcc/tools/execsnoop & [1] 2460 PCOMM PID PPID RET ARGS # cat /sys/kernel/debug/kprobes/list ffffffff91345650 r __x64_sys_execve+0x0 [FTRACE] ffffffff91345650 k __x64_sys_execve+0x0 [DISABLED][FTRACE] 3. Write 1 to /sys/kernel/debug/kprobes/enabled, which changes kprobes_all_disarmed to false but does not arm the disabled kprobe. # echo 1 > /sys/kernel/debug/kprobes/enabled # cat /sys/kernel/debug/kprobes/list ffffffff91345650 r __x64_sys_execve+0x0 [FTRACE] ffffffff91345650 k __x64_sys_execve+0x0 [DISABLED][FTRACE] 4. Kill execsnoop, when __disable_kprobe() calls disarm_kprobe() for the disabled kprobe and hits the WARN_ONCE() in __disarm_kprobe_ftrace(). # fg /usr/share/bcc/tools/execsnoop ^C Actually, WARN_ONCE() is fired twice, and __unregister_kprobe_top() misses some cleanups and leaves the aggregated kprobe in the hash table. Then, __unregister_trace_kprobe() initialises tk->rp.kp.list and creates an infinite loop like this. aggregated kprobe.list -> kprobe.list -. ^ | '.__.' In this situation, these commands fall into the infinite loop and result in RCU stall or soft lockup. cat /sys/kernel/debug/kprobes/list : show_kprobe_addr() enters into the infinite loop with RCU. /usr/share/bcc/tools/execsnoop : warn_kprobe_rereg() holds kprobe_mutex, and __get_valid_kprobe() is stuck in the loop. To avoid the issue, make sure we don't call disarm_kprobe() for disabled kprobes. [0] Failed to disarm kprobe-ftrace at __x64_sys_execve+0x0/0x40 (error -2) WARNING: CPU: 6 PID: 2460 at kernel/kprobes.c:1130 __disarm_kprobe_ftrace.isra.19 (kernel/kprobes.c:1129) Modules linked in: ena CPU: 6 PID: 2460 Comm: execsnoop Not tainted 5.19.0+ thesofproject#28 Hardware name: Amazon EC2 c5.2xlarge/, BIOS 1.0 10/16/2017 RIP: 0010:__disarm_kprobe_ftrace.isra.19 (kernel/kprobes.c:1129) Code: 24 8b 02 eb c1 80 3d c4 83 f2 01 00 75 d4 48 8b 75 00 89 c2 48 c7 c7 90 fa 0f 92 89 04 24 c6 05 ab 83 01 e8 e4 94 f0 ff <0f> 0b 8b 04 24 eb b1 89 c6 48 c7 c7 60 fa 0f 92 89 04 24 e8 cc 94 RSP: 0018:ffff9e6ec154bd98 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffffff930f7b00 RCX: 0000000000000001 RDX: 0000000080000001 RSI: ffffffff921461c5 RDI: 00000000ffffffff RBP: ffff89c504286da8 R08: 0000000000000000 R09: c0000000fffeffff R10: 0000000000000000 R11: ffff9e6ec154bc28 R12: ffff89c502394e40 R13: ffff89c502394c00 R14: ffff9e6ec154bc00 R15: 0000000000000000 FS: 00007fe800398740(0000) GS:ffff89c812d80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000c00057f010 CR3: 0000000103b54006 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> __disable_kprobe (kernel/kprobes.c:1716) disable_kprobe (kernel/kprobes.c:2392) __disable_trace_kprobe (kernel/trace/trace_kprobe.c:340) disable_trace_kprobe (kernel/trace/trace_kprobe.c:429) perf_trace_event_unreg.isra.2 (./include/linux/tracepoint.h:93 kernel/trace/trace_event_perf.c:168) perf_kprobe_destroy (kernel/trace/trace_event_perf.c:295) _free_event (kernel/events/core.c:4971) perf_event_release_kernel (kernel/events/core.c:5176) perf_release (kernel/events/core.c:5186) __fput (fs/file_table.c:321) task_work_run (./include/linux/sched.h:2056 (discriminator 1) kernel/task_work.c:179 (discriminator 1)) exit_to_user_mode_prepare (./include/linux/resume_user_mode.h:49 kernel/entry/common.c:169 kernel/entry/common.c:201) syscall_exit_to_user_mode (./arch/x86/include/asm/jump_label.h:55 ./arch/x86/include/asm/nospec-branch.h:384 ./arch/x86/include/asm/entry-common.h:94 kernel/entry/common.c:133 kernel/entry/common.c:296) do_syscall_64 (arch/x86/entry/common.c:87) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) RIP: 0033:0x7fe7ff210654 Code: 15 79 89 20 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb be 0f 1f 00 8b 05 9a cd 20 00 48 63 ff 85 c0 75 11 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 3a f3 c3 48 83 ec 18 48 89 7c 24 08 e8 34 fc RSP: 002b:00007ffdbd1d3538 EFLAGS: 00000246 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 0000000000000008 RCX: 00007fe7ff210654 RDX: 0000000000000000 RSI: 0000000000002401 RDI: 0000000000000008 RBP: 0000000000000000 R08: 94ae31d6fda838a4 R0900007fe8001c9d30 R10: 00007ffdbd1d34b0 R11: 0000000000000246 R12: 00007ffdbd1d3600 R13: 0000000000000000 R14: fffffffffffffffc R15: 00007ffdbd1d3560 </TASK> Link: https://lkml.kernel.org/r/[email protected] Fixes: 69d54b9 ("kprobes: makes kprobes/enabled works correctly for optimized kprobes.") Signed-off-by: Kuniyuki Iwashima <[email protected]> Reported-by: Ayushman Dutta <[email protected]> Cc: "Naveen N. Rao" <[email protected]> Cc: Anil S Keshavamurthy <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Wang Nan <[email protected]> Cc: Kuniyuki Iwashima <[email protected]> Cc: Kuniyuki Iwashima <[email protected]> Cc: Ayushman Dutta <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

Syzkaller produced the below call trace: BUG: KASAN: null-ptr-deref in io_msg_ring+0x3cb/0x9f0 Write of size 8 at addr 0000000000000070 by task repro/16399 CPU: 0 PID: 16399 Comm: repro Not tainted 6.1.0-rc1 #28 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 Call Trace: <TASK> dump_stack_lvl+0xcd/0x134 ? io_msg_ring+0x3cb/0x9f0 kasan_report+0xbc/0xf0 ? io_msg_ring+0x3cb/0x9f0 kasan_check_range+0x140/0x190 io_msg_ring+0x3cb/0x9f0 ? io_msg_ring_prep+0x300/0x300 io_issue_sqe+0x698/0xca0 io_submit_sqes+0x92f/0x1c30 __do_sys_io_uring_enter+0xae4/0x24b0 .... RIP: 0033:0x7f2eaf8f8289 RSP: 002b:00007fff40939718 EFLAGS: 00000246 ORIG_RAX: 00000000000001aa RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f2eaf8f8289 RDX: 0000000000000000 RSI: 0000000000006f71 RDI: 0000000000000004 RBP: 00007fff409397a0 R08: 0000000000000000 R09: 0000000000000039 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004006d0 R13: 00007fff40939880 R14: 0000000000000000 R15: 0000000000000000 </TASK> Kernel panic - not syncing: panic_on_warn set ... We don't have a NULL check on file_ptr in io_msg_send_fd() function, so when file_ptr is NUL src_file is also NULL and get_file() dereferences a NULL pointer and leads to above crash. Add a NULL check to fix this issue. Fixes: e6130eb ("io_uring: add support for passing fixed file descriptors") Reported-by: syzkaller <[email protected]> Signed-off-by: Harshit Mogalapalli <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>

The driver shutdown callback (which sends EDL_SOC_RESET to the device over serdev) should not be invoked when HCI device is not open (e.g. if hci_dev_open_sync() failed), because the serdev and its TTY are not open either. Also skip this step if device is powered off (qca_power_shutdown()). The shutdown callback causes use-after-free during system reboot with Qualcomm Atheros Bluetooth: Unable to handle kernel paging request at virtual address 0072662f67726fd7 ... CPU: 6 PID: 1 Comm: systemd-shutdow Tainted: G W 6.1.0-rt5-00325-g8a5f56bcfcca thesofproject#8 Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) Call trace: tty_driver_flush_buffer+0x4/0x30 serdev_device_write_flush+0x24/0x34 qca_serdev_shutdown+0x80/0x130 [hci_uart] device_shutdown+0x15c/0x260 kernel_restart+0x48/0xac KASAN report: BUG: KASAN: use-after-free in tty_driver_flush_buffer+0x1c/0x50 Read of size 8 at addr ffff16270c2e0018 by task systemd-shutdow/1 CPU: 7 PID: 1 Comm: systemd-shutdow Not tainted 6.1.0-next-20221220-00014-gb85aaf97fb01-dirty thesofproject#28 Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) Call trace: dump_backtrace.part.0+0xdc/0xf0 show_stack+0x18/0x30 dump_stack_lvl+0x68/0x84 print_report+0x188/0x488 kasan_report+0xa4/0xf0 __asan_load8+0x80/0xac tty_driver_flush_buffer+0x1c/0x50 ttyport_write_flush+0x34/0x44 serdev_device_write_flush+0x48/0x60 qca_serdev_shutdown+0x124/0x274 device_shutdown+0x1e8/0x350 kernel_restart+0x48/0xb0 __do_sys_reboot+0x244/0x2d0 __arm64_sys_reboot+0x54/0x70 invoke_syscall+0x60/0x190 el0_svc_common.constprop.0+0x7c/0x160 do_el0_svc+0x44/0xf0 el0_svc+0x2c/0x6c el0t_64_sync_handler+0xbc/0x140 el0t_64_sync+0x190/0x194 Fixes: 7e7bbdd ("Bluetooth: hci_qca: Fix qca6390 enable failure after warm reboot") Cc: <[email protected]> Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>

RanderWang added 3 commits July 6, 2018 17:35

ASoC: SOF: return status in snd_sof_ipc_reply

9535ab2

The IPC algorithm depends on the status of snd_sof_ipc_reply. The failed case is processed different with success one Signed-off-by: Rander Wang <[email protected]>

plbossart requested changes Jul 9, 2018

View reviewed changes

RanderWang force-pushed the ipx_fix branch from db1a5c3 to f58e491 Compare July 10, 2018 06:10

RanderWang added 5 commits July 10, 2018 14:29

ASoC: SOF: process SOF_IPC_DSP_REPLY case in cmd_done on APL

4879348

Set DONE bit in cmd_done function which processes msgs, rather than doing it in IRQ function. But if a msg is not in the rx list, it can only be done at IRQ function Signed-off-by: Rander Wang <[email protected]>

ASoC: SOF: process SOF_IPC_DSP_REPLY case in cmd_done on CNL

e094e3e

Set DONE bit in cmd_done function if direction is DSP_REPLY rather than doing it in IRQ function. But if a msg is not in the rx list, it can only be done at IRQ function Signed-off-by: Rander Wang <[email protected]>

RanderWang force-pushed the ipx_fix branch from f58e491 to d597225 Compare July 10, 2018 06:32

plbossart reviewed Jul 10, 2018

View reviewed changes

plbossart merged commit a3a39f2 into thesofproject:topic/sof-dev Jul 11, 2018

RanderWang deleted the ipx_fix branch July 24, 2018 05:35

aiChaoSONG mentioned this pull request Oct 28, 2019

[BUG][CML] Kernel NULL pointer deference in module reload stress test #1386

Closed

aiChaoSONG pushed a commit to aiChaoSONG/linux that referenced this pull request May 6, 2021

Merge pull request thesofproject#28 from Rust-for-Linux/rust-fix-panic

7a8a400

Forbid rustc from using -f{function,data}-sections (fixes thesofproject#20 panic)

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Fix IPC timeout issue on APL&CNL #28

Fix IPC timeout issue on APL&CNL #28

RanderWang commented Jul 6, 2018

plbossart left a comment

plbossart Jul 9, 2018

plbossart Jul 9, 2018

plbossart Jul 9, 2018

RanderWang Jul 10, 2018 •

edited

Loading

plbossart Jul 9, 2018

RanderWang Jul 10, 2018 •

edited

Loading

plbossart Jul 9, 2018

RanderWang Jul 10, 2018

plbossart Jul 9, 2018

RanderWang Jul 10, 2018

plbossart Jul 9, 2018

RanderWang Jul 10, 2018

plbossart Jul 9, 2018

RanderWang Jul 10, 2018

plbossart Jul 9, 2018

RanderWang Jul 10, 2018

plbossart Jul 9, 2018

RanderWang Jul 10, 2018

RanderWang commented Jul 10, 2018

plbossart left a comment

RanderWang commented Jul 11, 2018

RanderWang commented Jul 11, 2018

plbossart commented Jul 11, 2018

Fix IPC timeout issue on APL&CNL #28

Fix IPC timeout issue on APL&CNL #28

Conversation

RanderWang commented Jul 6, 2018

plbossart left a comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

RanderWang Jul 10, 2018 • edited Loading

Choose a reason for hiding this comment

Choose a reason for hiding this comment

RanderWang Jul 10, 2018 • edited Loading

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

RanderWang commented Jul 10, 2018

plbossart left a comment

Choose a reason for hiding this comment

RanderWang commented Jul 11, 2018

RanderWang commented Jul 11, 2018

plbossart commented Jul 11, 2018

RanderWang Jul 10, 2018 •

edited

Loading

RanderWang Jul 10, 2018 •

edited

Loading