2023.10.01
Changes
tch-gui-unhide
- Fixed Warning on setting landing page state during first install
- Fixed static leases in FW 17.2 which was broken by moving static leases to a separate tab in release 2023.05.16 (#168)
- Fixed broken Telephony Enabled switch on devices with no 4G backup (#169)
- Fixed clicking on Devices card header presented Local Network tabs rather than Devices tabs (#171)
- Fixed incorrect CPU detection that prevented tc being installed on FW 17.2 and Bandwidth Shaping tab missing (#172)
- Fixed incorrect tabs structure displayed when clicking on Network Connections in Diagnostics on FW 17.2.0284 (#173)
- Fixed unable to accept confirmation when clicking WiFi Analyzer options
- Fixed bug that could display the waiting spinner when clicking a disabled button
- Fixed incompatibility of WAN Sensing and Permanent WWAN with static IPs by adding new static-wan-routes-monitor service that will add/delete default routes when static WAN interfaces go up/down (#175)
- Fixed incorrect Egress Shapers count on QoS card (FW 20.4/21.4 only)
- Fixed invalid instance error in DHCP Relay (#179)
- Fixed IP addresses missing on FW 17.2 Devices list (#180)
- Fixed bug that prevented WAN interfaces (ppp/ipoe/wan6) from being removed when switching to bridged mode
- Fixed bug that showed 0 NAT helpers disabled instead of enabled on Firewall card
- Fixed bug that always showed Egress QoS as enabled on card even when it was disabled
- Fixed missing split_ssid id when device running in bridged mode (FW 20.4/21.4)
- Added option to disable/enable logging of unmatched packets in bandwidth monitoring
- Added Packages card to FW 20.4/21.4
- Removed custom feed configuration switch from Packages (use de-telstra with -o option or configure custom feeds manually)
- Removed IPv6 ULA Prefix from Local Network Configuration tab when in bridged mode
- Removed Backhaul SSID from WiFi Boosters card on FW 20.4/21.4
- Disabled new mmpbx global wait_for_cwmpd setting that prevented Telephony from starting if CWMPD was removed or disabled
- Upgraded tproxy-go to v2023.09.17-0-g0c6325a
tch-gui-unhide-xtra.adblock
- Fixed bug in latest version detection (#181)
tch-gui-unhide-xtra.rsyncd
- Fixed detection of service status
tch-gui-unhide-xtra.wireguard
- Changed to reloading networking after changes rather than restarting as could cause temporary loss of WiFi
de-telstra
- Disabled new mmpbx global wait_for_cwmpd setting that prevented Telephony from starting if CWMPD was removed or disabled
- Enabled -o option to configure opkg for FW 20.4/21.4 (NOTE: There are no complete repositories for FW 20.4/21.4, but I have created a couple of repositories that contain statically linked binaries)
- Added new -C option to enable/disable reboot on coredump
- Added a check to find services blocked on a file lock and to clean up so that services restarts do not hang
- Upgraded embedded CA certificates packages to 20230311-1
- Upgraded embedded wget to statically linked version 1.19.5 with SSL support that will run on both 32-bit and 64-bit devices
move-lan-port-to-own-network
- Removed - use the GUI to create VLANs
reset-to-factory-defaults-with-root
- Added new -B option to configure for bridged mode after reset/reboot
- Added new -C option to disable reboot on coredump after reset/reboot
safe-firmware-upgrade
- Added new -B option to configure for bridged mode after reset/reboot
- Added new -C option to disable reboot on coredump after reset/reboot
update-ca-certificates
- Added ca_directory to /root/.wgetrc