Skip to content

Enroll 23 single-e2e payload repos in pipeline controller LGTM mode - #81599

Merged
openshift-merge-bot[bot] merged 1 commit into
openshift:mainfrom
jmguzik:single-e2e-pipeline
Jul 8, 2026
Merged

Enroll 23 single-e2e payload repos in pipeline controller LGTM mode#81599
openshift-merge-bot[bot] merged 1 commit into
openshift:mainfrom
jmguzik:single-e2e-pipeline

Conversation

@jmguzik

@jmguzik jmguzik commented Jul 8, 2026

Copy link
Copy Markdown
Contributor

These payload repositories each have exactly one e2e test that was already configured with always_run: false but not managed by the pipeline controller. Add explicit always_run: false where it was implicit, and register all 23 repos in the LGTM config so their e2e tests are triggered automatically when the lgtm label is applied.

Affected repos: apiserver-network-proxy, aws-encryption-provider, aws-pod-identity-webhook, azure-kubernetes-kms, azure-workload-identity, bond-cni, configmap-reload, containernetworking-plugins, csi-driver-nfs, egress-router-cni, gcp-workload-identity-federation-webhook, kube-rbac-proxy, kubernetes-kube-storage-version-migrator, kubevirt-csi-driver, multus-admission-controller, multus-networkpolicy, must-gather, network-metrics-daemon, network-tools, networking-console-plugin, oc-mirror, route-override-cni, whereabouts-cni

CI config changes: 246 files across branches 4.15-5.0 + main/master

These payload repositories each have exactly one e2e test that was
already configured with always_run: false but not managed by the
pipeline controller. Add explicit always_run: false where it was
implicit, and register all 23 repos in the LGTM config so their
e2e tests are triggered automatically when the lgtm label is applied.

Affected repos: apiserver-network-proxy, aws-encryption-provider,
aws-pod-identity-webhook, azure-kubernetes-kms, azure-workload-identity,
bond-cni, configmap-reload, containernetworking-plugins, csi-driver-nfs,
egress-router-cni, gcp-workload-identity-federation-webhook,
kube-rbac-proxy, kubernetes-kube-storage-version-migrator,
kubevirt-csi-driver, multus-admission-controller, multus-networkpolicy,
must-gather, network-metrics-daemon, network-tools,
networking-console-plugin, oc-mirror, route-override-cni,
whereabouts-cni

CI config changes: 246 files across branches 4.15-5.0 + main/master

Signed-off-by: Jakub Guzik <jguzik@redhat.com>
@coderabbitai

coderabbitai Bot commented Jul 8, 2026

Copy link
Copy Markdown
Contributor

Caution

Review failed

An error occurred during the review process. Please try again later.

✨ Finishing Touches
🧪 Generate unit tests (beta)
  • Create PR with unit tests

Comment @coderabbitai help to get the list of available commands.

@openshift-ci
openshift-ci Bot requested review from adolfo-ab and aguidirh July 8, 2026 09:42
@openshift-ci openshift-ci Bot added the approved Indicates a PR has been approved by an approver from all required OWNERS files. label Jul 8, 2026
@openshift-merge-bot

Copy link
Copy Markdown
Contributor

[REHEARSALNOTIFIER]
@jmguzik: the pj-rehearse plugin accommodates running rehearsal tests for the changes in this PR. Expand 'Interacting with pj-rehearse' for usage details. The following rehearsable tests have been affected by this change:

Test name Repo Type Reason
pull-ci-openshift-bond-cni-release-4.19-e2e-aws openshift/bond-cni presubmit Ci-operator config changed
pull-ci-openshift-bond-cni-release-4.18-e2e-aws openshift/bond-cni presubmit Ci-operator config changed
pull-ci-openshift-bond-cni-release-4.21-e2e-aws openshift/bond-cni presubmit Ci-operator config changed
pull-ci-openshift-bond-cni-release-4.17-e2e-aws openshift/bond-cni presubmit Ci-operator config changed
pull-ci-openshift-bond-cni-main-e2e-aws openshift/bond-cni presubmit Ci-operator config changed
pull-ci-openshift-bond-cni-release-5.0-e2e-aws openshift/bond-cni presubmit Ci-operator config changed
pull-ci-openshift-bond-cni-release-4.22-e2e-aws openshift/bond-cni presubmit Ci-operator config changed
pull-ci-openshift-bond-cni-release-4.23-e2e-aws openshift/bond-cni presubmit Ci-operator config changed
pull-ci-openshift-bond-cni-release-4.20-e2e-aws openshift/bond-cni presubmit Ci-operator config changed
pull-ci-openshift-azure-kubernetes-kms-release-5.0-e2e-hypershift openshift/azure-kubernetes-kms presubmit Ci-operator config changed
pull-ci-openshift-azure-kubernetes-kms-release-4.21-e2e-hypershift openshift/azure-kubernetes-kms presubmit Ci-operator config changed
pull-ci-openshift-azure-kubernetes-kms-release-4.16-e2e-hypershift openshift/azure-kubernetes-kms presubmit Ci-operator config changed
pull-ci-openshift-azure-kubernetes-kms-release-4.17-e2e-hypershift openshift/azure-kubernetes-kms presubmit Ci-operator config changed
pull-ci-openshift-azure-kubernetes-kms-release-4.20-e2e-hypershift openshift/azure-kubernetes-kms presubmit Ci-operator config changed
pull-ci-openshift-azure-kubernetes-kms-release-4.18-e2e-hypershift openshift/azure-kubernetes-kms presubmit Ci-operator config changed
pull-ci-openshift-azure-kubernetes-kms-release-4.19-e2e-hypershift openshift/azure-kubernetes-kms presubmit Ci-operator config changed
pull-ci-openshift-azure-kubernetes-kms-release-4.23-e2e-hypershift openshift/azure-kubernetes-kms presubmit Ci-operator config changed
pull-ci-openshift-azure-kubernetes-kms-release-4.22-e2e-hypershift openshift/azure-kubernetes-kms presubmit Ci-operator config changed
pull-ci-openshift-azure-kubernetes-kms-main-e2e-hypershift openshift/azure-kubernetes-kms presubmit Ci-operator config changed
pull-ci-openshift-network-metrics-daemon-release-4.17-e2e-gcp openshift/network-metrics-daemon presubmit Ci-operator config changed
pull-ci-openshift-network-metrics-daemon-release-4.19-e2e-gcp openshift/network-metrics-daemon presubmit Ci-operator config changed
pull-ci-openshift-network-metrics-daemon-release-4.18-e2e-gcp openshift/network-metrics-daemon presubmit Ci-operator config changed
pull-ci-openshift-network-metrics-daemon-release-4.16-e2e-gcp openshift/network-metrics-daemon presubmit Ci-operator config changed
pull-ci-openshift-network-metrics-daemon-release-4.15-e2e-gcp openshift/network-metrics-daemon presubmit Ci-operator config changed
pull-ci-openshift-network-metrics-daemon-release-4.22-e2e-gcp openshift/network-metrics-daemon presubmit Ci-operator config changed

A total of 246 jobs have been affected by this change. The above listing is non-exhaustive and limited to 25 jobs.

A full list of affected jobs can be found here
Prior to this PR being merged, you will need to either run and acknowledge or opt to skip these rehearsals.

Interacting with pj-rehearse

Comment: /pj-rehearse to run up to 5 rehearsals
Comment: /pj-rehearse skip to opt-out of rehearsals
Comment: /pj-rehearse {test-name}, with each test separated by a space, to run one or more specific rehearsals
Comment: /pj-rehearse more to run up to 10 rehearsals
Comment: /pj-rehearse max to run up to 25 rehearsals
Comment: /pj-rehearse auto-ack to run up to 5 rehearsals, and add the rehearsals-ack label on success
Comment: /pj-rehearse list to get an up-to-date list of affected jobs
Comment: /pj-rehearse abort to abort all active rehearsals
Comment: /pj-rehearse network-access-allowed to allow rehearsals of tests that have the restrict_network_access field set to false. This must be executed by an openshift org member who is not the PR author

Once you are satisfied with the results of the rehearsals, comment: /pj-rehearse ack to unblock merge. When the rehearsals-ack label is present on your PR, merge will no longer be blocked by rehearsals.
If you would like the rehearsals-ack label removed, comment: /pj-rehearse reject to re-block merging.

@jmguzik

jmguzik commented Jul 8, 2026

Copy link
Copy Markdown
Contributor Author

/pj-rehearse ack

@openshift-merge-bot

Copy link
Copy Markdown
Contributor

@jmguzik: now processing your pj-rehearse request. Please allow up to 10 minutes for jobs to trigger or cancel.

@openshift-merge-bot openshift-merge-bot Bot added the rehearsals-ack Signifies that rehearsal jobs have been acknowledged label Jul 8, 2026
@danilo-gemoli

Copy link
Copy Markdown
Contributor

/lgtm

@openshift-ci openshift-ci Bot added the lgtm Indicates that a PR is ready to be merged. label Jul 8, 2026
@openshift-ci

openshift-ci Bot commented Jul 8, 2026

Copy link
Copy Markdown
Contributor

[APPROVALNOTIFIER] This PR is APPROVED

This pull-request has been approved by: danilo-gemoli, jmguzik

The full list of commands accepted by this bot can be found here.

The pull request process is described here

Details Needs approval from an approver in each of these files:

Approvers can indicate their approval by writing /approve in a comment
Approvers can cancel approval by writing /approve cancel in a comment

@openshift-ci

openshift-ci Bot commented Jul 8, 2026

Copy link
Copy Markdown
Contributor

@jmguzik: all tests passed!

Full PR test history. Your PR dashboard.

Details

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes-sigs/prow repository. I understand the commands that are listed here.

@openshift-merge-bot
openshift-merge-bot Bot merged commit 821027b into openshift:main Jul 8, 2026
16 checks passed
openshift-merge-bot Bot pushed a commit that referenced this pull request Jul 14, 2026
…n) (#81855)

PR #79626 removed the branch filter so the pipeline controller would
trigger e2e jobs on all hypershift branches. PR #81599 inadvertently
re-added the main-only branch filter when bulk-enrolling 23 repos,
causing release-4.22 PRs to merge without e2e coverage again.

Remove the branch filter to match the pattern used by other repos in
the config, preventing future regressions from file rewrites.

Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
SachinNinganure pushed a commit to SachinNinganure/release that referenced this pull request Jul 20, 2026
…penshift#81599)

These payload repositories each have exactly one e2e test that was
already configured with always_run: false but not managed by the
pipeline controller. Add explicit always_run: false where it was
implicit, and register all 23 repos in the LGTM config so their
e2e tests are triggered automatically when the lgtm label is applied.

Affected repos: apiserver-network-proxy, aws-encryption-provider,
aws-pod-identity-webhook, azure-kubernetes-kms, azure-workload-identity,
bond-cni, configmap-reload, containernetworking-plugins, csi-driver-nfs,
egress-router-cni, gcp-workload-identity-federation-webhook,
kube-rbac-proxy, kubernetes-kube-storage-version-migrator,
kubevirt-csi-driver, multus-admission-controller, multus-networkpolicy,
must-gather, network-metrics-daemon, network-tools,
networking-console-plugin, oc-mirror, route-override-cni,
whereabouts-cni

CI config changes: 246 files across branches 4.15-5.0 + main/master

Signed-off-by: Jakub Guzik <jguzik@redhat.com>
SachinNinganure pushed a commit to SachinNinganure/release that referenced this pull request Jul 20, 2026
…n) (openshift#81855)

PR openshift#79626 removed the branch filter so the pipeline controller would
trigger e2e jobs on all hypershift branches. PR openshift#81599 inadvertently
re-added the main-only branch filter when bulk-enrolling 23 repos,
causing release-4.22 PRs to merge without e2e coverage again.

Remove the branch filter to match the pattern used by other repos in
the config, preventing future regressions from file rewrites.

Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
amogh-redhat pushed a commit to amogh-redhat/release that referenced this pull request Aug 5, 2026
…penshift#81599)

These payload repositories each have exactly one e2e test that was
already configured with always_run: false but not managed by the
pipeline controller. Add explicit always_run: false where it was
implicit, and register all 23 repos in the LGTM config so their
e2e tests are triggered automatically when the lgtm label is applied.

Affected repos: apiserver-network-proxy, aws-encryption-provider,
aws-pod-identity-webhook, azure-kubernetes-kms, azure-workload-identity,
bond-cni, configmap-reload, containernetworking-plugins, csi-driver-nfs,
egress-router-cni, gcp-workload-identity-federation-webhook,
kube-rbac-proxy, kubernetes-kube-storage-version-migrator,
kubevirt-csi-driver, multus-admission-controller, multus-networkpolicy,
must-gather, network-metrics-daemon, network-tools,
networking-console-plugin, oc-mirror, route-override-cni,
whereabouts-cni

CI config changes: 246 files across branches 4.15-5.0 + main/master

Signed-off-by: Jakub Guzik <jguzik@redhat.com>
amogh-redhat pushed a commit to amogh-redhat/release that referenced this pull request Aug 5, 2026
…n) (openshift#81855)

PR openshift#79626 removed the branch filter so the pipeline controller would
trigger e2e jobs on all hypershift branches. PR openshift#81599 inadvertently
re-added the main-only branch filter when bulk-enrolling 23 repos,
causing release-4.22 PRs to merge without e2e coverage again.

Remove the branch filter to match the pattern used by other repos in
the config, preventing future regressions from file rewrites.

Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
TimurMP pushed a commit to TimurMP/release that referenced this pull request Sep 5, 2026
…penshift#81599)

These payload repositories each have exactly one e2e test that was
already configured with always_run: false but not managed by the
pipeline controller. Add explicit always_run: false where it was
implicit, and register all 23 repos in the LGTM config so their
e2e tests are triggered automatically when the lgtm label is applied.

Affected repos: apiserver-network-proxy, aws-encryption-provider,
aws-pod-identity-webhook, azure-kubernetes-kms, azure-workload-identity,
bond-cni, configmap-reload, containernetworking-plugins, csi-driver-nfs,
egress-router-cni, gcp-workload-identity-federation-webhook,
kube-rbac-proxy, kubernetes-kube-storage-version-migrator,
kubevirt-csi-driver, multus-admission-controller, multus-networkpolicy,
must-gather, network-metrics-daemon, network-tools,
networking-console-plugin, oc-mirror, route-override-cni,
whereabouts-cni

CI config changes: 246 files across branches 4.15-5.0 + main/master

Signed-off-by: Jakub Guzik <jguzik@redhat.com>
TimurMP pushed a commit to TimurMP/release that referenced this pull request Sep 5, 2026
…n) (openshift#81855)

PR openshift#79626 removed the branch filter so the pipeline controller would
trigger e2e jobs on all hypershift branches. PR openshift#81599 inadvertently
re-added the main-only branch filter when bulk-enrolling 23 repos,
causing release-4.22 PRs to merge without e2e coverage again.

Remove the branch filter to match the pattern used by other repos in
the config, preventing future regressions from file rewrites.

Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Labels

approved Indicates a PR has been approved by an approver from all required OWNERS files. lgtm Indicates that a PR is ready to be merged. rehearsals-ack Signifies that rehearsal jobs have been acknowledged

Projects

None yet

Development

Successfully merging this pull request may close these issues.

2 participants