Update README, deploy dify with YAML file on Kubernetes (langgenius#5131

)

README.md

@@ -185,10 +185,11 @@ After running, you can access the Dify dashboard in your browser at [http://loca
 
 If you need to customize the configuration, please refer to the comments in our [docker-compose.yml](docker/docker-compose.yaml) file and manually set the environment configuration. After making the changes, please run `docker-compose up -d` again. You can see the full list of environment variables [here](https://docs.dify.ai/getting-started/install-self-hosted/environments).
 
-If you'd like to configure a highly-available setup, there are community-contributed [Helm Charts](https://helm.sh/) which allow Dify to be deployed on Kubernetes.
+If you'd like to configure a highly-available setup, there are community-contributed [Helm Charts](https://helm.sh/) and YAML files which allow Dify to be deployed on Kubernetes.
 
 - [Helm Chart by @LeoQuote](https://github.com/douban/charts/tree/master/charts/dify)
 - [Helm Chart by @BorisPolonsky](https://github.com/BorisPolonsky/dify-helm)
+- [YAML file by @Winson-030](https://github.com/Winson-030/dify-kubernetes)
 
 
 ## Contributing

README_AR.md

@@ -167,10 +167,11 @@ docker compose up -d
 
 إذا كنت بحاجة إلى تخصيص التكوين، يرجى الرجوع إلى التعليقات في ملف [docker-compose.yml](docker/docker-compose.yaml) لدينا وتعيين التكوينات البيئية يدويًا. بعد إجراء التغييرات، يرجى تشغيل `docker-compose up -d` مرة أخرى. يمكنك رؤية قائمة كاملة بالمتغيرات البيئية [هنا](https://docs.dify.ai/getting-started/install-self-hosted/environments).
 
-إذا كنت ترغب في تكوين إعداد متوفر بشكل عالي، فهناك [رسوم بيانية Helm](https://helm.sh/) المساهمة من المجتمع تسمح بنشر Dify على Kubernetes.
+يوجد مجتمع خاص بـ [Helm Charts](https://helm.sh/) وملفات YAML التي تسمح بتنفيذ Dify على Kubernetes للنظام من الإيجابيات العلوية.
 
 - [رسم بياني Helm من قبل @LeoQuote](https://github.com/douban/charts/tree/master/charts/dify)
 - [رسم بياني Helm من قبل @BorisPolonsky](https://github.com/BorisPolonsky/dify-helm)
+- [ملف YAML من قبل @Winson-030](https://github.com/Winson-030/dify-kubernetes)
 
 
 ## المساهمة

README_CN.md

@@ -186,10 +186,11 @@ docker compose up -d
 
 #### 使用 Helm Chart 部署
 
-使用 [Helm Chart](https://helm.sh/) 版本，可以在 Kubernetes 上部署 Dify。
+使用 [Helm Chart](https://helm.sh/) 版本或者 YAML 文件，可以在 Kubernetes 上部署 Dify。
 
 - [Helm Chart by @LeoQuote](https://github.com/douban/charts/tree/master/charts/dify)
 - [Helm Chart by @BorisPolonsky](https://github.com/BorisPolonsky/dify-helm)
+- [YAML 文件 by @Winson-030](https://github.com/Winson-030/dify-kubernetes)
 
 ### 配置
 

README_ES.md

@@ -192,10 +192,11 @@ Si necesitas personalizar la configuración, consulta los comentarios en nuestro
 
 . Después de realizar los cambios, ejecuta `docker-compose up -d` nuevamente. Puedes ver la lista completa de variables de entorno [aquí](https://docs.dify.ai/getting-started/install-self-hosted/environments).
 
-Si deseas configurar una instalación altamente disponible, hay [Gráficos Helm](https://helm.sh/) contribuidos por la comunidad que permiten implementar Dify en Kubernetes.
+Si desea configurar una configuración de alta disponibilidad, la comunidad proporciona [Gráficos Helm](https://helm.sh/) y archivos YAML, a través de los cuales puede desplegar Dify en Kubernetes.
 
 - [Gráfico Helm por @LeoQuote](https://github.com/douban/charts/tree/master/charts/dify)
 - [Gráfico Helm por @BorisPolonsky](https://github.com/BorisPolonsky/dify-helm)
+- [Ficheros YAML por @Winson-030](https://github.com/Winson-030/dify-kubernetes)
 
 
 ## Contribuir

README_FR.md

@@ -192,10 +192,11 @@ Si vous devez personnaliser la configuration, veuillez
 
  vous référer aux commentaires dans notre fichier [docker-compose.yml](docker/docker-compose.yaml) et définir manuellement la configuration de l'environnement. Après avoir apporté les modifications, veuillez exécuter à nouveau `docker-compose up -d`. Vous pouvez voir la liste complète des variables d'environnement [ici](https://docs.dify.ai/getting-started/install-self-hosted/environments).
 
-Si vous souhaitez configurer une installation hautement disponible, il existe des [Helm Charts](https://helm.sh/) contribués par la communauté qui permettent de déployer Dify sur Kubernetes.
+Si vous souhaitez configurer une configuration haute disponibilité, la communauté fournit des [Helm Charts](https://helm.sh/) et des fichiers YAML, à travers lesquels vous pouvez déployer Dify sur Kubernetes.
 
 - [Helm Chart par @LeoQuote](https://github.com/douban/charts/tree/master/charts/dify)
 - [Helm Chart par @BorisPolonsky](https://github.com/BorisPolonsky/dify-helm)
+- [Fichier YAML par @Winson-030](https://github.com/Winson-030/dify-kubernetes)
 
 
 ## Contribuer

README_JA.md

@@ -189,10 +189,11 @@ docker compose up -d
 
 環境設定をカスタマイズする場合は、[docker-compose.yml](docker/docker-compose.yaml)ファイル内のコメントを参照して、環境設定を手動で設定してください。変更を加えた後は、再び `docker-compose up -d` を実行してください。環境変数の完全なリストは[こちら](https://docs.dify.ai/getting-started/install-self-hosted/environments)をご覧ください。
 
-高可用性のセットアップを構成する場合は、コミュニティによって提供されている[Helm Charts](https://helm.sh/)があり、これによりKubernetes上にDifyを展開できます。
+高可用性設定を設定する必要がある場合、コミュニティは[Helm Charts](https://helm.sh/)とYAMLファイルにより、DifyをKubernetesにデプロイすることができます。
 
 - [Helm Chart by @LeoQuote](https://github.com/douban/charts/tree/master/charts/dify)
 - [Helm Chart by @BorisPolonsky](https://github.com/BorisPolonsky/dify-helm)
+- [YAML file by @Winson-030](https://github.com/Winson-030/dify-kubernetes)
 
 
 ## 貢献

README_KL.md

@@ -190,11 +190,11 @@ After running, you can access the Dify dashboard in your browser at [http://loca
 
 If you need to customize the configuration, please refer to the comments in our [docker-compose.yml](docker/docker-compose.yaml) file and manually set the environment configuration. After making the changes, please run `docker-compose up -d` again. You can see the full list of environment variables [here](https://docs.dify.ai/getting-started/install-self-hosted/environments).
 
-If you'd like to configure a highly-available setup, there are community-contributed [Helm Charts](https://helm.sh/) which allow Dify to be deployed on Kubernetes.
+If you'd like to configure a highly-available setup, there are community-contributed [Helm Charts](https://helm.sh/) and YAML files which allow Dify to be deployed on Kubernetes.
 
 - [Helm Chart by @LeoQuote](https://github.com/douban/charts/tree/master/charts/dify)
 - [Helm Chart by @BorisPolonsky](https://github.com/BorisPolonsky/dify-helm)
-
+- [YAML file by @Winson-030](https://github.com/Winson-030/dify-kubernetes)
 
 ## Contributing
 

README_KR.md

@@ -184,11 +184,11 @@ docker compose up -d
 구성 커스터마이징이 필요한 경우, [docker-compose.yml](docker/docker-compose.yaml) 파일의 코멘트를 참조하여 환경 구성을 수동으로 설정하십시오. 변경 후 `docker-compose up -d` 를 다시 실행하십시오. 환경 변수의 전체 목록은 [여기](https://docs.dify.ai/getting-started/install-self-hosted/environments)에서 확인할 수 있습니다.
 
 
-고가용성 설정을 구성하려면 Dify를 Kubernetes에 배포할 수 있는 커뮤니티 제공 [Helm Charts](https://helm.sh/)가 있습니다.
+Dify를 Kubernetes에 배포하고 프리미엄 스케일링 설정을 구성했다는 커뮤니티가 제공하는 [Helm Charts](https://helm.sh/)와 YAML 파일이 존재합니다.
 
 - [Helm Chart by @LeoQuote](https://github.com/douban/charts/tree/master/charts/dify)
 - [Helm Chart by @BorisPolonsky](https://github.com/BorisPolonsky/dify-helm)
-
+- [YAML file by @Winson-030](https://github.com/Winson-030/dify-kubernetes)
 
 ## 기여