home-assistant · jbouwh · Feb 24, 2021 · Feb 25, 2021 · Feb 25, 2021 · Feb 25, 2021
diff --git a/source/_docs/mqtt/discovery.markdown b/source/_docs/mqtt/discovery.markdown
@@ -154,9 +154,11 @@ Supported abbreviations:
     'on_cmd_type':         'on_command_type',
     'opt':                 'optimistic',
     'osc_cmd_t':           'oscillation_command_topic',
+    'osc_cmd_tpl':         'oscillation_command_template',
     'osc_stat_t':          'oscillation_state_topic',
     'osc_val_tpl':         'oscillation_value_template',
     'pct_cmd_t':           'percentage_command_topic',
+    'pct_cmd_tpl':         'percentage_command_template',
     'pct_stat_t':          'percentage_state_topic',
     'pct_val_tpl':         'percentage_value_template',
     'pl':                  'payload',
@@ -196,6 +198,7 @@ Supported abbreviations:
     'pow_stat_t':          'power_state_topic',
     'pow_stat_tpl':        'power_state_template',
     'pr_mode_cmd_t':       'preset_mode_command_topic',
+    'pr_mode_cmd_tpl':     'preset_mode_command_template',
     'pr_mode_stat_t':      'preset_mode_state_topic',
     'pr_mode_val_tpl':     'preset_mode_value_template',
     'pr_modes':            'preset_modes',

diff --git a/source/_integrations/alarm_control_panel.mqtt.markdown b/source/_integrations/alarm_control_panel.mqtt.markdown
@@ -113,6 +113,10 @@ device:
       description: "The name of the device."
       required: false
       type: string
+    suggested_area:
+      description: 'Suggest an area if the device isn’t in one yet.'
+      required: false
+      type: string
     sw_version:
       description: "The firmware version of the device."
       required: false

diff --git a/source/_integrations/amcrest.markdown b/source/_integrations/amcrest.markdown
@@ -117,6 +117,10 @@ binary_sensors:
       description: "Return `on` when a motion is detected, `off` when not. Motion detection is enabled by default for most cameras, if this functionality is not working check that it is enabled in Settings > Events > Video Detection. Uses streaming method (see [below](#streaming-vs-polled-binary-sensors))."
     motion_detected_polled:
       description: "Return `on` when a motion is detected, `off` when not. Motion detection is enabled by default for most cameras, if this functionality is not working check that it is enabled in Settings > Events > Video Detection. Uses polled method (see [below](#streaming-vs-polled-binary-sensors))."
+    crossline_detected:
+      description: "Return `on` when a tripwire tripping is detected, `off` when not. Uses streaming method (see [below](#streaming-vs-polled-binary-sensors))."
+    crossline_detected_polled:
+      description: "Return `on` when a tripwire is tripping is detected, `off` when not. Uses polled method (see [below](#streaming-vs-polled-binary-sensors))."
     online:
       description: "Return `on` when camera is available (i.e., responding to commands), `off` when not."
 sensors:
@@ -377,6 +381,7 @@ amcrest:
     password: YOUR_PASSWORD
     binary_sensors:
       - motion_detected
+      - crossline_detected
       - online
     sensors:
       - sdcard

@@ -8,7 +8,7 @@ ha_category:
   - Camera
   - Lock
 ha_release: 0.64
-ha_iot_class: Cloud Polling
+ha_iot_class: Cloud Push
 ha_config_flow: true
 ha_codeowners:
   - '@bdraco'

diff --git a/source/_integrations/binary_sensor.modbus.markdown b/source/_integrations/binary_sensor.modbus.markdown
diff --git a/source/_integrations/binary_sensor.mqtt.markdown b/source/_integrations/binary_sensor.mqtt.markdown
@@ -84,6 +84,10 @@ device:
       description: The name of the device.
       required: false
       type: string
+    suggested_area:
+      description: 'Suggest an area if the device isn’t in one yet.'
+      required: false
+      type: string
     sw_version:
       description: The firmware version of the device.
       required: false

diff --git a/source/_integrations/camera.mqtt.markdown b/source/_integrations/camera.mqtt.markdown
@@ -77,6 +77,10 @@ device:
       description: The name of the device.
       required: false
       type: string
+    suggested_area:
+      description: 'Suggest an area if the device isn’t in one yet.'
+      required: false
+      type: string
     sw_version:
       description: The firmware version of the device.
       required: false

diff --git a/source/_integrations/climate.modbus.markdown b/source/_integrations/climate.modbus.markdown
diff --git a/source/_integrations/climate.mqtt.markdown b/source/_integrations/climate.mqtt.markdown
@@ -116,6 +116,10 @@ device:
       description: 'The name of the device.'
       required: false
       type: string
+    suggested_area:
+      description: 'Suggest an area if the device isn’t in one yet.'
+      required: false
+      type: string
     sw_version:
       description: 'The firmware version of the device.'
       required: false