Remove modbus duplicate strings

homeassistant/components/modbus/__init__.py

@@ -16,10 +16,11 @@
     DEVICE_CLASSES_SCHEMA as SWITCH_DEVICE_CLASSES_SCHEMA,
 )
 from homeassistant.const import (
-    ATTR_STATE,
     CONF_ADDRESS,
+    CONF_BINARY_SENSORS,
     CONF_COMMAND_OFF,
     CONF_COMMAND_ON,
+    CONF_COUNT,
     CONF_COVERS,
     CONF_DELAY,
     CONF_DEVICE_CLASS,
@@ -29,8 +30,11 @@
     CONF_OFFSET,
     CONF_PORT,
     CONF_SCAN_INTERVAL,
+    CONF_SENSORS,
     CONF_SLAVE,
     CONF_STRUCTURE,
+    CONF_SWITCHES,
+    CONF_TEMPERATURE_UNIT,
     CONF_TIMEOUT,
     CONF_TYPE,
     CONF_UNIT_OF_MEASUREMENT,
@@ -40,17 +44,16 @@
 from .const import (
     ATTR_ADDRESS,
     ATTR_HUB,
+    ATTR_STATE,
     ATTR_UNIT,
     ATTR_VALUE,
     CALL_TYPE_COIL,
     CALL_TYPE_DISCRETE,
     CALL_TYPE_REGISTER_HOLDING,
     CALL_TYPE_REGISTER_INPUT,
     CONF_BAUDRATE,
-    CONF_BINARY_SENSORS,
     CONF_BYTESIZE,
     CONF_CLIMATES,
-    CONF_COUNT,
     CONF_CURRENT_TEMP,
     CONF_CURRENT_TEMP_REGISTER_TYPE,
     CONF_DATA_COUNT,
@@ -63,7 +66,6 @@
     CONF_REGISTER,
     CONF_REVERSE_ORDER,
     CONF_SCALE,
-    CONF_SENSORS,
     CONF_STATE_CLOSED,
     CONF_STATE_CLOSING,
     CONF_STATE_OFF,
@@ -74,9 +76,7 @@
     CONF_STATUS_REGISTER_TYPE,
     CONF_STEP,
     CONF_STOPBITS,
-    CONF_SWITCHES,
     CONF_TARGET_TEMP,
-    CONF_UNIT,
     CONF_VERIFY_REGISTER,
     CONF_VERIFY_STATE,
     DATA_TYPE_CUSTOM,
@@ -143,7 +143,7 @@ def number(value: Any) -> Union[int, float]:
         vol.Optional(CONF_MIN_TEMP, default=5): cv.positive_int,
         vol.Optional(CONF_STEP, default=0.5): vol.Coerce(float),
         vol.Optional(CONF_STRUCTURE, default=DEFAULT_STRUCTURE_PREFIX): cv.string,
-        vol.Optional(CONF_UNIT, default=DEFAULT_TEMP_UNIT): cv.string,
+        vol.Optional(CONF_TEMPERATURE_UNIT, default=DEFAULT_TEMP_UNIT): cv.string,
     }
 )
 

homeassistant/components/modbus/binary_sensor.py

@@ -15,6 +15,7 @@
 )
 from homeassistant.const import (
     CONF_ADDRESS,
+    CONF_BINARY_SENSORS,
     CONF_DEVICE_CLASS,
     CONF_NAME,
     CONF_SCAN_INTERVAL,
@@ -31,7 +32,6 @@
 from .const import (
     CALL_TYPE_COIL,
     CALL_TYPE_DISCRETE,
-    CONF_BINARY_SENSORS,
     CONF_COILS,
     CONF_HUB,
     CONF_INPUT_TYPE,

homeassistant/components/modbus/climate.py

@@ -15,12 +15,12 @@
     SUPPORT_TARGET_TEMPERATURE,
 )
 from homeassistant.const import (
-    ATTR_TEMPERATURE,
     CONF_NAME,
     CONF_OFFSET,
     CONF_SCAN_INTERVAL,
     CONF_SLAVE,
     CONF_STRUCTURE,
+    CONF_TEMPERATURE_UNIT,
     TEMP_CELSIUS,
     TEMP_FAHRENHEIT,
 )
@@ -45,7 +45,7 @@
     CONF_SCALE,
     CONF_STEP,
     CONF_TARGET_TEMP,
-    CONF_UNIT,
+    CONF_TEMPERATURE,
     DATA_TYPE_CUSTOM,
     DEFAULT_STRUCT_FORMAT,
     MODBUS_DOMAIN,
@@ -130,7 +130,7 @@ def __init__(
         self._scale = config[CONF_SCALE]
         self._scan_interval = timedelta(seconds=config[CONF_SCAN_INTERVAL])
         self._offset = config[CONF_OFFSET]
-        self._unit = config[CONF_UNIT]
+        self._unit = config[CONF_TEMPERATURE_UNIT]
         self._max_temp = config[CONF_MAX_TEMP]
         self._min_temp = config[CONF_MIN_TEMP]
         self._temp_step = config[CONF_STEP]
@@ -209,7 +209,7 @@ def target_temperature_step(self):
     def set_temperature(self, **kwargs):
         """Set new target temperature."""
         target_temperature = int(
-            (kwargs.get(ATTR_TEMPERATURE) - self._offset) / self._scale
+            (kwargs.get(CONF_TEMPERATURE) - self._offset) / self._scale
         )
         if target_temperature is None:
             return

homeassistant/components/modbus/const.py

@@ -2,22 +2,51 @@
 
 # configuration names
 CONF_BAUDRATE = "baudrate"
+CONF_BINARY_SENSOR = "binary_sensor"
 CONF_BYTESIZE = "bytesize"
+CONF_CLIMATE = "climate"
+CONF_CLIMATES = "climates"
+CONF_COILS = "coils"
+CONF_COVER = "cover"
+CONF_CURRENT_TEMP = "current_temp_register"
+CONF_CURRENT_TEMP_REGISTER_TYPE = "current_temp_register_type"
+CONF_DATA_COUNT = "data_count"
+CONF_DATA_TYPE = "data_type"
 CONF_HUB = "hub"
+CONF_INPUTS = "inputs"
+CONF_INPUT_TYPE = "input_type"
+CONF_MAX_TEMP = "max_temp"
+CONF_MIN_TEMP = "min_temp"
 CONF_PARITY = "parity"
-CONF_STOPBITS = "stopbits"
 CONF_REGISTER = "register"
 CONF_REGISTER_TYPE = "register_type"
 CONF_REGISTERS = "registers"
 CONF_REVERSE_ORDER = "reverse_order"
-CONF_SCALE = "scale"
-CONF_COUNT = "count"
 CONF_PRECISION = "precision"
-CONF_COILS = "coils"
+CONF_SCALE = "scale"
+CONF_SENSOR = "sensor"
+CONF_STATE_CLOSED = "state_closed"
+CONF_STATE_CLOSING = "state_closing"
+CONF_STATE_OFF = "state_off"
+CONF_STATE_ON = "state_on"
+CONF_STATE_OPEN = "state_open"
+CONF_STATE_OPENING = "state_opening"
+CONF_STATUS_REGISTER = "status_register"
+CONF_STATUS_REGISTER_TYPE = "status_register_type"
+CONF_STEP = "temp_step"
+CONF_STOPBITS = "stopbits"
+CONF_SWITCH = "switch"
+CONF_TEMPERATURE = "temperature"
+CONF_TARGET_TEMP = "target_temp_register"
+CONF_VERIFY_REGISTER = "verify_register"
+CONF_VERIFY_STATE = "verify_state"
 
-# integration names
-DEFAULT_HUB = "modbus_hub"
-MODBUS_DOMAIN = "modbus"
+# service call attributes
+ATTR_ADDRESS = "address"
+ATTR_HUB = "hub"
+ATTR_UNIT = "unit"
+ATTR_VALUE = "value"
+ATTR_STATE = "state"
 
 # data types
 DATA_TYPE_CUSTOM = "custom"
@@ -32,66 +61,19 @@
 CALL_TYPE_REGISTER_HOLDING = "holding"
 CALL_TYPE_REGISTER_INPUT = "input"
 
-# the following constants are TBD.
-# changing those in general causes a breaking change, because
-# the contents of configuration.yaml needs to be updated,
-# therefore they are left to a later date.
-# but kept here, with a reference to the file using them.
-
-# __init.py
-ATTR_ADDRESS = "address"
-ATTR_HUB = "hub"
-ATTR_UNIT = "unit"
-ATTR_VALUE = "value"
+# service calls
 SERVICE_WRITE_COIL = "write_coil"
 SERVICE_WRITE_REGISTER = "write_register"
-DEFAULT_SCAN_INTERVAL = 15  # seconds
 
-# binary_sensor.py
-CONF_INPUTS = "inputs"
-CONF_INPUT_TYPE = "input_type"
-CONF_BINARY_SENSORS = "binary_sensors"
-CONF_BINARY_SENSOR = "binary_sensor"
-
-# sensor.py
-# CONF_DATA_TYPE = "data_type"
+# integration names
+DEFAULT_HUB = "modbus_hub"
+DEFAULT_SCAN_INTERVAL = 15  # seconds
+DEFAULT_SLAVE = 1
+DEFAULT_STRUCTURE_PREFIX = ">f"
 DEFAULT_STRUCT_FORMAT = {
     DATA_TYPE_INT: {1: "h", 2: "i", 4: "q"},
     DATA_TYPE_UINT: {1: "H", 2: "I", 4: "Q"},
     DATA_TYPE_FLOAT: {1: "e", 2: "f", 4: "d"},
 }
-CONF_SENSOR = "sensor"
-CONF_SENSORS = "sensors"
-
-# switch.py
-CONF_STATE_OFF = "state_off"
-CONF_STATE_ON = "state_on"
-CONF_VERIFY_REGISTER = "verify_register"
-CONF_VERIFY_STATE = "verify_state"
-CONF_SWITCH = "switch"
-CONF_SWITCHES = "switches"
-
-# climate.py
-CONF_CLIMATES = "climates"
-CONF_CLIMATE = "climate"
-CONF_TARGET_TEMP = "target_temp_register"
-CONF_CURRENT_TEMP = "current_temp_register"
-CONF_CURRENT_TEMP_REGISTER_TYPE = "current_temp_register_type"
-CONF_DATA_TYPE = "data_type"
-CONF_DATA_COUNT = "data_count"
-CONF_UNIT = "temperature_unit"
-CONF_MAX_TEMP = "max_temp"
-CONF_MIN_TEMP = "min_temp"
-CONF_STEP = "temp_step"
-DEFAULT_STRUCTURE_PREFIX = ">f"
 DEFAULT_TEMP_UNIT = "C"
-
-# cover.py
-CONF_COVER = "cover"
-CONF_STATE_OPEN = "state_open"
-CONF_STATE_CLOSED = "state_closed"
-CONF_STATE_OPENING = "state_opening"
-CONF_STATE_CLOSING = "state_closing"
-CONF_STATUS_REGISTER = "status_register"
-CONF_STATUS_REGISTER_TYPE = "status_register_type"
-DEFAULT_SLAVE = 1
+MODBUS_DOMAIN = "modbus"

homeassistant/components/modbus/modbus.py

@@ -6,13 +6,15 @@
 from pymodbus.transaction import ModbusRtuFramer
 
 from homeassistant.const import (
-    ATTR_STATE,
+    CONF_BINARY_SENSORS,
     CONF_COVERS,
     CONF_DELAY,
     CONF_HOST,
     CONF_METHOD,
     CONF_NAME,
     CONF_PORT,
+    CONF_SENSORS,
+    CONF_SWITCHES,
     CONF_TIMEOUT,
     CONF_TYPE,
     EVENT_HOMEASSISTANT_STOP,
@@ -22,21 +24,19 @@
 from .const import (
     ATTR_ADDRESS,
     ATTR_HUB,
+    ATTR_STATE,
     ATTR_UNIT,
     ATTR_VALUE,
     CONF_BAUDRATE,
     CONF_BINARY_SENSOR,
-    CONF_BINARY_SENSORS,
     CONF_BYTESIZE,
     CONF_CLIMATE,
     CONF_CLIMATES,
     CONF_COVER,
     CONF_PARITY,
     CONF_SENSOR,
-    CONF_SENSORS,
     CONF_STOPBITS,
     CONF_SWITCH,
-    CONF_SWITCHES,
     MODBUS_DOMAIN as DOMAIN,
     SERVICE_WRITE_COIL,
     SERVICE_WRITE_REGISTER,

homeassistant/components/modbus/sensor.py

@@ -17,10 +17,12 @@
 )
 from homeassistant.const import (
     CONF_ADDRESS,
+    CONF_COUNT,
     CONF_DEVICE_CLASS,
     CONF_NAME,
     CONF_OFFSET,
     CONF_SCAN_INTERVAL,
+    CONF_SENSORS,
     CONF_SLAVE,
     CONF_STRUCTURE,
     CONF_UNIT_OF_MEASUREMENT,
@@ -37,7 +39,6 @@
 from .const import (
     CALL_TYPE_REGISTER_HOLDING,
     CALL_TYPE_REGISTER_INPUT,
-    CONF_COUNT,
     CONF_DATA_TYPE,
     CONF_HUB,
     CONF_INPUT_TYPE,
@@ -47,7 +48,6 @@
     CONF_REGISTERS,
     CONF_REVERSE_ORDER,
     CONF_SCALE,
-    CONF_SENSORS,
     DATA_TYPE_CUSTOM,
     DATA_TYPE_FLOAT,
     DATA_TYPE_INT,

tests/components/modbus/test_modbus_binary_sensor.py

@@ -5,12 +5,12 @@
 from homeassistant.components.modbus.const import (
     CALL_TYPE_COIL,
     CALL_TYPE_DISCRETE,
-    CONF_BINARY_SENSORS,
     CONF_INPUT_TYPE,
     CONF_INPUTS,
 )
 from homeassistant.const import (
     CONF_ADDRESS,
+    CONF_BINARY_SENSORS,
     CONF_DEVICE_CLASS,
     CONF_NAME,
     CONF_SLAVE,

tests/components/modbus/test_modbus_sensor.py

@@ -4,7 +4,6 @@
 from homeassistant.components.modbus.const import (
     CALL_TYPE_REGISTER_HOLDING,
     CALL_TYPE_REGISTER_INPUT,
-    CONF_COUNT,
     CONF_DATA_TYPE,
     CONF_INPUT_TYPE,
     CONF_PRECISION,
@@ -13,7 +12,6 @@
     CONF_REGISTERS,
     CONF_REVERSE_ORDER,
     CONF_SCALE,
-    CONF_SENSORS,
     DATA_TYPE_FLOAT,
     DATA_TYPE_INT,
     DATA_TYPE_STRING,
@@ -22,9 +20,11 @@
 from homeassistant.components.sensor import DOMAIN as SENSOR_DOMAIN
 from homeassistant.const import (
     CONF_ADDRESS,
+    CONF_COUNT,
     CONF_DEVICE_CLASS,
     CONF_NAME,
     CONF_OFFSET,
+    CONF_SENSORS,
     CONF_SLAVE,
 )
 

tests/components/modbus/test_modbus_switch.py

@@ -12,7 +12,6 @@
     CONF_REGISTERS,
     CONF_STATE_OFF,
     CONF_STATE_ON,
-    CONF_SWITCHES,
     CONF_VERIFY_REGISTER,
     CONF_VERIFY_STATE,
 )
@@ -24,6 +23,7 @@
     CONF_DEVICE_CLASS,
     CONF_NAME,
     CONF_SLAVE,
+    CONF_SWITCHES,
     STATE_OFF,
     STATE_ON,
 )