add board Seeed Indicator RP2040

README.md

@@ -48,6 +48,7 @@ Read the [Contributing Guide](https://github.com/earlephilhower/arduino-pico/blo
 * nullbits Bit-C PRO
 * Pimoroni PGA2040
 * Seeed XIAO RP2040
+* Seeed Indicator RP2040
 * Solder Party RP2040 Stamp
 * SparkFun ProMicro RP2040
 * SparkFun Thing Plus RP2040

tools/json/seeed_indicator_rp2040.json

@@ -0,0 +1,55 @@
+{
+  "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
+        "usb_vid": "0x2E8A",
+        "usb_pid": "0x000A"
+      }
+    },
+    "core": "earlephilhower",
+    "cpu": "cortex-m0plus",
+    "extra_flags": "-D ARDUINO_SEEED_XIAO_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
+    "f_cpu": "133000000L",
+    "hwids": [
+      [
+        "0x2886",
+        "0x0050"
+      ],
+      [
+        "0x2886",
+        "0x0050"
+      ]
+    ],
+    "mcu": "rp2040",
+    "variant": "seeed_indicator_rp2040"
+  },
+  "debug": {
+    "jlink_device": "RP2040_M0_0",
+    "openocd_target": "rp2040.cfg",
+    "svd_path": "rp2040.svd"
+  },
+  "frameworks": [
+    "arduino"
+  ],
+  "name": "INDICATOR RP2040",
+  "upload": {
+    "maximum_ram_size": 270336,
+    "maximum_size": 2097152,
+    "require_upload_port": true,
+    "native_usb": true,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": false,
+    "protocol": "picotool",
+    "protocols": [
+      "blackmagic",
+      "cmsis-dap",
+      "jlink",
+      "raspberrypi-swd",
+      "picotool",
+      "picoprobe"
+    ]
+  },
+  "url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
+  "vendor": "Seeed"
+}

tools/makeboards.py

@@ -412,6 +412,7 @@ def MakeBoardJSON(name, vendor_name, product_name, vid, pid, pwr, boarddefine, f
 
 # Seeed
 MakeBoard("seeed_xiao_rp2040", "Seeed", "XIAO RP2040", "0x2e8a", "0x000a", 250, "SEEED_XIAO_RP2040", 2, "boot2_w25q080_2_padded_checksum")
+MakeBoard("seeed_indicator_rp2040", "Seeed", "INDICATOR RP2040", "0x2886", "0x0050", 250, "SEEED_INDICATOR_RP2040", 2, "boot2_w25q080_2_padded_checksum")
 
 # VCC-GND YD-2040 - Use generic SPI/4 because boards seem to come with varied flash modules but same name
 MakeBoard('vccgnd_yd_rp2040', "VCC-GND", "YD RP2040", "0x2e8a", "0x800a", 500, "YD_RP2040", 16, "boot2_generic_03h_4_padded_checksum")

variants/seeed_indicator_rp2040/pins_arduino.h

@@ -0,0 +1,33 @@
+#pragma once
+
+
+// Serial
+#define PIN_SERIAL1_TX (16u)
+#define PIN_SERIAL1_RX (17u)
+
+#define PIN_SERIAL2_TX (8u)
+#define PIN_SERIAL2_RX (9u)
+
+// SPI
+#define PIN_SPI0_MISO  (0u)
+#define PIN_SPI0_MOSI  (3u)
+#define PIN_SPI0_SCK   (2u)
+#define PIN_SPI0_SS    (1u)
+
+#define PIN_SPI1_MISO  (12u)
+#define PIN_SPI1_MOSI  (11u)
+#define PIN_SPI1_SCK   (10u)
+#define PIN_SPI1_SS    (13u)
+
+// Wire
+#define PIN_WIRE0_SDA  (20u)
+#define PIN_WIRE0_SCL  (21u)
+
+#define PIN_WIRE1_SDA  (14u)
+#define PIN_WIRE1_SCL  (15u)
+
+#define SERIAL_HOWMANY (3u)
+#define SPI_HOWMANY    (2u)
+#define WIRE_HOWMANY   (2u)
+
+#include "../generic/common.h"