Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Sync up with Linus #45

Merged
merged 92 commits into from
Mar 1, 2015
Merged

Sync up with Linus #45

merged 92 commits into from
Mar 1, 2015

Conversation

dabrace
Copy link
Owner

@dabrace dabrace commented Mar 1, 2015

No description provided.

thierryreding and others added 30 commits February 19, 2015 14:21
Recent changes in the clock framework have caused a behavioural change
in that clocks that have not had their rate set explicitly will now be
reset to their initial rate (or 0) when the clock is released. This is
triggered in the deferred probing path, resulting in the clock running
at a wrong frequency after the successful probe.

This can be easily fixed by setting the rate explicitly rather than by
relying on the implicit rate inherited by the parent.

Tested-by: Tomeu Vizoso <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Commit eab3bbe ("drm/atomic: Add drm_crtc_state->active") added the
field to track the DPMS state. However, the Tegra driver was in modified
in parallel and subclasses the CRTC atomic state, so needed to duplicate
the code in the atomic helpers. After the addition of the active_changed
field it became out of sync and doesn't reset it when duplicating state.

This causes a full modeset on things like page-flips, which will in turn
cause warnings due to the VBLANK machinery being disabled when it really
should remain on.

Tested-by: Tomeu Vizoso <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Store a pointer to the CRTC in its atomic state to make it easy for
state handling code to get at the CRTC.

Tested-by: Tomeu Vizoso <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
The code in tegra_crtc_prepare() really belongs in tegra_dc_init(), or
at least most of it. This fixes an issue with VBLANK handling because
tegra_crtc_prepare() would overwrite the interrupt mask register that
tegra_crtc_enable_vblank() had written to to enable VBLANK interrupts.

Tested-by: Tomeu Vizoso <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
This patch fixes a bug in the initialization of the pipelines. The
init_pipelines() function was called with a constant value of 0 in the
first_pipe argument. This is an error because amdkfd doesn't handle pipe 0.

The correct way is to pass the value that get_first_pipe() returns as the
argument for first_pipe.

This bug appeared in 3.19 (first version with amdkfd) and it causes around 15%
drop in CPU performance of Kaveri (A10-7850).

v2: Don't set get_first_pipe() as inline because it calls BUG_ON()

Signed-off-by: Oded Gabbay <[email protected]>
Cc: [email protected]
Tested-by: Michel Dänzer <[email protected]>
get_pipes_num() calls BUG_ON so we can't set it as inline because it produces a
warning as BUG_ON() uses static variables when it is expanded.

Signed-off-by: Oded Gabbay <[email protected]>
ftrace_enable_ftrace_graph_caller and ftrace_disable_ftrace_graph_caller
should replace B(jmp) instruction and not BL(call) instruction.

Commit 9f1ae75("arm64: Correct ftrace calls to
aarch64_insn_gen_branch_imm()") had a typo and used
AARCH64_INSN_BRANCH_LINK instead of AARCH64_INSN_BRANCH_NOLINK.

Either instruction will work, as the link register is saved/restored
across the branch but this better matches the intention of the code.

Signed-off-by: Pratyush Anand <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
Fix cbz/cbnz having the mask offset by a bit, and add encodings for
tbz/tbnz so that all branch forms are represented.

Signed-off-by: Robin Murphy <[email protected]>
Acked-by: Will Deacon <[email protected]>
Acked-by: Zi Shen Lim <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
asm/assembler.h lacks the usual guard against multiple inclusion,
leading to a compilation failure if it is accidentally included
twice.

Using the classic #ifndef/#define/#endif construct solves the issue.

Signed-off-by: Marc Zyngier <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
When reviewing patch that fixes VGA on BDW Halo Jani noticed that
we also had other ULT IDs that weren't listed there.

So this follow-up patch add these pci-ids as halo and fix comments
on i915_pciids.h

Cc: Jani Nikula <[email protected]>
Cc: [email protected]
Signed-off-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
For filesystems without separate project quota inode field in the
superblock we just reuse project quota file for group quotas (and vice
versa) if project quota file is allocated and we need group quota file.
When we reuse the file, quota structures on disk suddenly have wrong
type stored in d_flags though. Nobody really cares about this (although
structure type reported to userspace was wrong as well) except
that after commit 14bf61f (quota: Switch ->get_dqblk() and
->set_dqblk() to use bytes as space units) assertion in
xfs_qm_scall_getquota() started to trigger on xfs/106 test (apparently I
was testing without XFS_DEBUG so I didn't notice when submitting the
above commit).

Fix the problem by properly resetting ddq->d_flags when running quotacheck
for a quota file.

CC: [email protected]
Reported-by: Al Viro <[email protected]>
Signed-off-by: Jan Kara <[email protected]>
Reviewed-by: Dave Chinner <[email protected]>
Signed-off-by: Dave Chinner <[email protected]>
A new fsync vs power fail test in xfstests indicated that XFS can
have unreliable data consistency when doing extending truncates that
require block zeroing. The blocks beyond EOF get zeroed in memory,
but we never force those changes to disk before we run the
transaction that extends the file size and exposes those blocks to
userspace. This can result in the blocks not being correctly zeroed
after a crash.

Because in-memory behaviour is correct, tools like fsx don't pick up
any coherency problems - it's not until the filesystem is shutdown
or the system crashes after writing the truncate transaction to the
journal but before the zeroed data in the page cache is flushed that
the issue is exposed.

Fix this by also flushing the dirty data in memory region between
the old size and new size when we've found blocks that need zeroing
in the truncate process.

Reported-by: Liu Bo <[email protected]>
cc: <[email protected]>
Signed-off-by: Dave Chinner <[email protected]>
Reviewed-by: Brian Foster <[email protected]>
Signed-off-by: Dave Chinner <[email protected]>
skylake_update_primary_plane() did not handle all pixel formats returned
by skl_format_to_fourcc(). Handle alpha similar to skl_update_plane().

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89052
Reviewed-by: Damien Lespiau <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Add quirk for Dell Chromebook 11 backlight.

Reported-and-tested-by: Owen Garland <[email protected]>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=93451
Acked-by: Damien Lespiau <[email protected]>
Cc: [email protected]
Signed-off-by: Jani Nikula <[email protected]>
Need to define and use appropriate functions for when BLK_DEV_INTEGRITY
is not set.

Reported-by: Fengguang Wu <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
mapping->host can be NULL and shouldn't be dereferenced before being checked.

[ 1295.741844] GPF could be caused by NULL-ptr deref or user memory accessgeneral protection fault: 0000 [#1] SMP KASAN
[ 1295.746387] Dumping ftrace buffer:
[ 1295.748217]    (ftrace buffer empty)
[ 1295.749527] Modules linked in:
[ 1295.750268] CPU: 62 PID: 23410 Comm: trinity-c70 Not tainted 3.19.0-next-20150219-sasha-00045-g9130270f #1939
[ 1295.750268] task: ffff8803a49db000 ti: ffff8803a4dc8000 task.ti: ffff8803a4dc8000
[ 1295.750268] RIP: shmem_mapping (mm/shmem.c:1458)
[ 1295.750268] RSP: 0000:ffff8803a4dcfbf8  EFLAGS: 00010206
[ 1295.750268] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 00000000000f2804
[ 1295.750268] RDX: 0000000000000005 RSI: 0400000000000794 RDI: 0000000000000028
[ 1295.750268] RBP: ffff8803a4dcfc08 R08: 0000000000000000 R09: 00000000031de000
[ 1295.750268] R10: dffffc0000000000 R11: 00000000031c1000 R12: 0400000000000794
[ 1295.750268] R13: 00000000031c2000 R14: 00000000031de000 R15: ffff880e3bdc1000
[ 1295.750268] FS:  00007f8703c7e700(0000) GS:ffff881164800000(0000) knlGS:0000000000000000
[ 1295.750268] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1295.750268] CR2: 0000000004e58000 CR3: 00000003a9f3c000 CR4: 00000000000007a0
[ 1295.750268] DR0: ffffffff81000000 DR1: 0000009494949494 DR2: 0000000000000000
[ 1295.750268] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 00000000000d0602
[ 1295.750268] Stack:
[ 1295.750268]  ffff8803a4dcfec8 ffffffffbb1dc770 ffff8803a4dcfc38 ffffffffad6f230b
[ 1295.750268]  ffffffffad6f2b0d 0000014100000000 ffff88001e17c08b ffff880d9453fe08
[ 1295.750268]  ffff8803a4dcfd18 ffffffffad6f2ce2 ffff8803a49dbcd8 ffff8803a49dbce0
[ 1295.750268] Call Trace:
[ 1295.750268] mincore_page (mm/mincore.c:61)
[ 1295.750268] ? mincore_pte_range (include/linux/spinlock.h:312 mm/mincore.c:131)
[ 1295.750268] mincore_pte_range (mm/mincore.c:151)
[ 1295.750268] ? mincore_unmapped_range (mm/mincore.c:113)
[ 1295.750268] __walk_page_range (mm/pagewalk.c:51 mm/pagewalk.c:90 mm/pagewalk.c:116 mm/pagewalk.c:204)
[ 1295.750268] walk_page_range (mm/pagewalk.c:275)
[ 1295.750268] SyS_mincore (mm/mincore.c:191 mm/mincore.c:253 mm/mincore.c:220)
[ 1295.750268] ? mincore_pte_range (mm/mincore.c:220)
[ 1295.750268] ? mincore_unmapped_range (mm/mincore.c:113)
[ 1295.750268] ? __mincore_unmapped_range (mm/mincore.c:105)
[ 1295.750268] ? ptlock_free (mm/mincore.c:24)
[ 1295.750268] ? syscall_trace_enter (arch/x86/kernel/ptrace.c:1610)
[ 1295.750268] ia32_do_call (arch/x86/ia32/ia32entry.S:446)
[ 1295.750268] Code: e5 48 c1 ea 03 53 48 89 fb 48 83 ec 08 80 3c 02 00 75 4f 48 b8 00 00 00 00 00 fc ff df 48 8b 1b 48 8d 7b 28 48 89 fa 48 c1 ea 03 <80> 3c 02 00 75 3f 48 b8 00 00 00 00 00 fc ff df 48 8b 5b 28 48

All code
========
   0:	e5 48                	in     $0x48,%eax
   2:	c1 ea 03             	shr    $0x3,%edx
   5:	53                   	push   %rbx
   6:	48 89 fb             	mov    %rdi,%rbx
   9:	48 83 ec 08          	sub    $0x8,%rsp
   d:	80 3c 02 00          	cmpb   $0x0,(%rdx,%rax,1)
  11:	75 4f                	jne    0x62
  13:	48 b8 00 00 00 00 00 	movabs $0xdffffc0000000000,%rax
  1a:	fc ff df
  1d:	48 8b 1b             	mov    (%rbx),%rbx
  20:	48 8d 7b 28          	lea    0x28(%rbx),%rdi
  24:	48 89 fa             	mov    %rdi,%rdx
  27:	48 c1 ea 03          	shr    $0x3,%rdx
  2b:*	80 3c 02 00          	cmpb   $0x0,(%rdx,%rax,1)		<-- trapping instruction
  2f:	75 3f                	jne    0x70
  31:	48 b8 00 00 00 00 00 	movabs $0xdffffc0000000000,%rax
  38:	fc ff df
  3b:	48 8b 5b 28          	mov    0x28(%rbx),%rbx
  3f:	48                   	rex.W
	...

Code starting with the faulting instruction
===========================================
   0:	80 3c 02 00          	cmpb   $0x0,(%rdx,%rax,1)
   4:	75 3f                	jne    0x45
   6:	48 b8 00 00 00 00 00 	movabs $0xdffffc0000000000,%rax
   d:	fc ff df
  10:	48 8b 5b 28          	mov    0x28(%rbx),%rbx
  14:	48                   	rex.W
	...
[ 1295.750268] RIP shmem_mapping (mm/shmem.c:1458)
[ 1295.750268]  RSP <ffff8803a4dcfbf8>

Fixes: 97b713b ("fs: kill BDI_CAP_SWAP_BACKED")
Signed-off-by: Sasha Levin <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
If the default PM domain using PM_CLK is used for PM runtime, the real PM
domain(s) cannot be registered from DT later.

Hence do not enable it when running a multi-platform kernel with genpd
support on an r8a7740. The R-Mobile PM domain driver will take care of
PM runtime management of the module clocks.

The default PM domain is still needed for:
  - platforms without genpd support,
  - the legacy (non-DT) case, where genpd may take over later, except
    for the C5 "always on" PM domain.

Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
We shouldn't get here with RENAME_EXCHANGE set and no
target_ip, but let's be defensive, because xfs_cross_rename()
will dereference it.

Spotted by Coverity.

Signed-off-by: Eric Sandeen <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Dave Chinner <[email protected]>
If xfs_trans_reserve fails we don't cancel the transaction,
and we'll leak the allocated transaction pointer.

Spotted by Coverity.

Signed-off-by: Eric Sandeen <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Dave Chinner <[email protected]>
In commit ccfc086
Author: Rob Clark <[email protected]>
Date:   Thu Dec 18 16:01:48 2014 -0500

    drm: tweak getconnector locking

We need to extend the locking to cover connector->state reading for
atomic drivers, but the above commit was a bit too eager and also
included the fill_modes callback. Which on i915 on old platforms using
load detection needs to acquire modeset locks, resulting in a deadlock
on output probing.

Reported-by: Marc Finet <[email protected]>
Cc: Marc Finet <[email protected]>
Cc: [email protected]
Signed-off-by: Daniel Vetter <[email protected]>
Reviewed-by: Rob Clark <[email protected]>
Signed-off-by: Dave Airlie <[email protected]>
….org/tegra/linux into drm-fixes

drm/tegra: Fixes for v3.20-rc1

This fixes a bit of fallout that was caused by the atomic modesetting
driver conversion and some last-minute changes in the DRM atomic core.
It also fixes a bug exposed by recent changes in the clock framework
which results in non-working HDMI.

* tag 'drm/tegra/for-3.20-rc1-fixes' of git://anongit.freedesktop.org/tegra/linux:
  drm/tegra: dc: Move more code into ->init()
  drm/tegra: dc: Wire up CRTC parent of atomic state
  drm/tegra: dc: Reset state's active_changed field
  drm/tegra: hdmi: Explicitly set clock rate
…rg/~gabbayo/linux into drm-fixes

- Fix a bug that caused 15% CPU performance drop in Kaveri. This was caused
  because we overwritten the initialization of the first pipe (out of eight),
  which is dedicated to radeon operation. The fix was tested by Michel Dänzer.
  This bug was introduced by a patch I prepared (yeah, my bad) and was merged
  to 3.19-rc6. Therefore, I also marked it as Cc:stable.

- Fix sparse warning
* tag 'drm-amdkfd-fixes-2015-02-23' of git://people.freedesktop.org/~gabbayo/linux:
  drm/amdkfd: don't set get_pipes_num() as inline
  drm/amdkfd: Initialize only amdkfd's assigned pipelines
The A2Q (Add To Queue) and UPDATE bits are left in their previous state
when resetting the layer.
This lead to weird behavior when enabling the plane again: the framebuffer
previously queued is dequeued and we end up with access to an old memory
region.

Reset those bits when resetting the channel.

Signed-off-by: Boris Brezillon <[email protected]>
Remove a useless pm_runtime_put_sync leading to unbalanced
usage_count.

Signed-off-by: Boris Brezillon <[email protected]>
Reported-by: Sylvain Rochet <[email protected]>
When converting from implicitly tracked execlist queue items to ref counted
requests, not all frees of requests were replaced with unrefs, and extraneous
refs/unrefs of contexts were added.
Correct the unbalanced refcount & replace the frees.
Remove a noisy warning when hitting the request creation path.

drm_i915_gem_request and intel_context are both kref reference counted
structures. Upon allocation, drm_i915_gem_request's ref count should be
bumped using kref_init. When a context is assigned to the request,
the context's reference count should be bumped using i915_gem_context_reference.
i915_gem_request_reference will reduce the context reference count when
the request is freed.

Problem introduced in
commit 6d3d827
Author:     Nick Hoath <[email protected]>
AuthorDate: Thu Jan 15 13:10:39 2015 +0000

     drm/i915: Subsume intel_ctx_submit_request in to drm_i915_gem_request

v2: Added comments explaining how the ctx pointer and the request object should
be ref-counted. Removed noisy warning.

v3: Cleaned up the language used in the commit & the header
description (Thanks David Gordon)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88652
Signed-off-by: Nick Hoath <[email protected]>
Reviewed-by: Thomas Daniel <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
When we walk the list of vma, or even for protecting against concurrent
framebuffer creation, we must hold the struct_mutex or else a second
thread can corrupt the list as we walk it.

Fixes regression from
commit d7f46fc
Author: Ben Widawsky <[email protected]>
Date:   Fri Dec 6 14:10:55 2013 -0800

    drm/i915: Make pin count per VMA

References: https://bugs.freedesktop.org/show_bug.cgi?id=89085
Signed-off-by: Chris Wilson <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Cc: [email protected]
Signed-off-by: Jani Nikula <[email protected]>
…ates

Atm, it's possible that the interrupt handler is called when the device
is in D3 or some other low-power state. It can be due to another device
that is still in D0 state and shares the interrupt line with i915, or on
some platforms there could be spurious interrupts even without sharing
the interrupt line. The latter case was reported by Klaus Ethgen using a
Lenovo x61p machine (gen 4). He noticed this issue via a system
suspend/resume hang and bisected it to the following commit:

commit e11aa36
Author: Jesse Barnes <[email protected]>
Date:   Wed Jun 18 09:52:55 2014 -0700

    drm/i915: use runtime irq suspend/resume in freeze/thaw

This is a problem, since in low-power states IIR will always read
0xffffffff resulting in an endless IRQ servicing loop.

Fix this by handling interrupts only when the driver explicitly enables
them and so it's guaranteed that the interrupt registers return a valid
value.

Note that this issue existed even before the above commit, since during
runtime suspend/resume we never unregistered the handler.

v2:
- clarify the purpose of smp_mb() vs. synchronize_irq() in the
  code comment (Chris)

v3:
- no need for an explicit smp_mb(), we can assume that synchronize_irq()
  and the mmio read/writes in the install hooks provide for this (Daniel)
- remove code comment as the remaining synchronize_irq() is self
  explanatory (Daniel)

v4:
- drm_irq_uninstall() implies synchronize_irq(), so no need to call it
  explicitly (Daniel)

Reference: https://lkml.org/lkml/2015/2/11/205
Reported-and-bisected-by: Klaus Ethgen <[email protected]>
Cc: [email protected]
Signed-off-by: Imre Deak <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Some bios really like to joke and start the planes at an offset ...
hooray!

Align start and end to fix this.

v2: Fixup calculation of size, spotted by Chris Wilson.

v3: Fix serious fumble I've just spotted.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=86883
Cc: [email protected]
Cc: Johannes W <[email protected]>
Cc: Chris Wilson <[email protected]>
Cc: Jani Nikula <[email protected]>
Reported-and-tested-by: Johannes W <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
[Jani: split WARN_ONs, rebase on v4.0-rc1]
Signed-off-by: Jani Nikula <[email protected]>
The sata_ref_clk is a reference clock to the SATA phy.
This fixes SATA malfunction across suspend/resume or when
SATA driver is used as a module.

Signed-off-by: Roger Quadros <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
The sata_ref_clk is a reference clock to the SATA phy.
This fixes SATA malfunction across suspend/resume or when
SATA driver is used as a module.

Signed-off-by: Roger Quadros <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
JoonsooKim and others added 9 commits February 28, 2015 09:57
max_used_pages is defined as atomic_long_t so we need to use unsigned
long to keep temporary value for it rather than int which is smaller
than unsigned long in a 64 bit system.

Signed-off-by: Joonsoo Kim <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Jerome Marchand <[email protected]>
Cc: Nitin Gupta <[email protected]>
Cc: Sergey Senozhatsky <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
The memcg control knobs indicate the highest possible value using the
symbolic name "infinity", which is long and awkward to type.

Switch to the string "max", which is just as descriptive but shorter and
sweeter.

This changes a user interface, so do it before the release and before
the development flag is dropped from the default hierarchy.

Signed-off-by: Johannes Weiner <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Vladimir Davydov <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
There's a uname workaround for broken userspace which can't handle kernel
versions of 3.x.  Update it for 4.x.

Signed-off-by: Jon DeVree <[email protected]>
Cc: Andi Kleen <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Historically, !__GFP_FS allocations were not allowed to invoke the OOM
killer once reclaim had failed, but nevertheless kept looping in the
allocator.

Commit 9879de7 ("mm: page_alloc: embed OOM killing naturally into
allocation slowpath"), which should have been a simple cleanup patch,
accidentally changed the behavior to aborting the allocation at that
point.  This creates problems with filesystem callers (?) that currently
rely on the allocator waiting for other tasks to intervene.

Revert the behavior as it shouldn't have been changed as part of a
cleanup patch.

Fixes: 9879de7 ("mm: page_alloc: embed OOM killing naturally into allocation slowpath")
Signed-off-by: Johannes Weiner <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Reported-by: Tetsuo Handa <[email protected]>
Cc: Theodore Ts'o <[email protected]>
Cc: Dave Chinner <[email protected]>
Acked-by: David Rientjes <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: <[email protected]>	[3.19.x]
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Core mm expects __PAGETABLE_{PUD,PMD}_FOLDED to be defined if these page
table levels folded.  Usually, these defines are provided by
<asm-generic/pgtable-nopmd.h> and <asm-generic/pgtable-nopud.h>.

But some architectures fold page table levels in a custom way.  They
need to define these macros themself.  This patch adds missing defines.

The patch fixes mm->nr_pmds underflow and eliminates dead __pmd_alloc()
and __pud_alloc() on architectures without these page table levels.

Signed-off-by: Kirill A. Shutemov <[email protected]>
Cc: Aaro Koskinen <[email protected]>
Cc: David Howells <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: Koichi Yasutake <[email protected]>
Cc: Martin Schwidefsky <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Merge misc fixes from Andrew Morton:
 "13 fixes"

* emailed patches from Andrew Morton <[email protected]>:
  mm: add missing __PAGETABLE_{PUD,PMD}_FOLDED defines
  mm: page_alloc: revert inadvertent !__GFP_FS retry behavior change
  kernel/sys.c: fix UNAME26 for 4.0
  mm: memcontrol: use "max" instead of "infinity" in control knobs
  zram: use proper type to update max_used_pages
  drivers/rtc/rtc-ds1685.c: fix conditional in ds1685_rtc_sysfs_time_regs_{show,store}
  nilfs2: fix potential memory overrun on inode
  scripts/gdb: add empty package initialization script
  rtc: ds1685: remove superfluous checks for out-of-range u8 values
  rtc: ds1685: fix ds1685_rtc_alarm_irq_enable build error
  memcg: fix low limit calculation
  mm/nommu: fix memory leak
  ocfs2: update web page + git tree in documentation
…ux/kernel/git/dgc/linux-xfs

Pull xfs fixes from Dave Chinner:
 "These are fixes for regressions/bugs introduced in the 4.0 merge cycle
  and problems discovered during the merge window that need to be pushed
  back to stable kernels ASAP.

  This contains:
   - ensure quota type is reset in on-disk dquots
   - fix missing partial EOF block data flush on truncate extension
   - fix transaction leak in error handling for new pnfs block layout
     support
   - add missing target_ip check to RENAME_EXCHANGE"

* tag 'xfs-for-linus-4.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs:
  xfs: cancel failed transaction in xfs_fs_commit_blocks()
  xfs: Ensure we have target_ip for RENAME_EXCHANGE
  xfs: ensure truncate forces zeroed blocks to disk
  xfs: Fix quota type in quota structures when reusing quota file
Pull block layer fixes from Jens Axboe:
 "Two smaller fixes for this cycle:

   - A fixup from Keith so that NVMe compiles without BLK_INTEGRITY,
     basically just moving the code around appropriately.

   - A fixup for shm, fixing an oops in shmem_mapping() for mapping with
     no inode.  From Sasha"

[ The shmem fix doesn't look block-layer-related, but fixes a bug that
  happened due to the backing_dev_info removal..  - Linus ]

* 'for-linus' of git://git.kernel.dk/linux-block:
  mm: shmem: check for mapping owner before dereferencing
  NVMe: Fix for BLK_DEV_INTEGRITY not set
Pull drm fixes from Dave Airlie:
 "Just general fixes: radeon, i915, atmel, tegra, amdkfd and one core
  fix"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (28 commits)
  drm: atmel-hlcdc: remove clock polarity from crtc driver
  drm/radeon: only enable DP audio if the monitor supports it
  drm/radeon: fix atom aux payload size check for writes (v2)
  drm/radeon: fix 1 RB harvest config setup for TN/RL
  drm/radeon: enable SRBM timeout interrupt on EG/NI
  drm/radeon: enable SRBM timeout interrupt on SI
  drm/radeon: enable SRBM timeout interrupt on CIK v2
  drm/radeon: dump full IB if we hit a packet error
  drm/radeon: disable mclk switching with 120hz+ monitors
  drm/radeon: use drm_mode_vrefresh() rather than mode->vrefresh
  drm/radeon: enable native backlight control on old macs
  drm/i915: Fix frontbuffer false positve.
  drm/i915: Align initial plane backing objects correctly
  drm/i915: avoid processing spurious/shared interrupts in low-power states
  drm/i915: Check obj->vma_list under the struct_mutex
  drm/i915: Fix a use after free, and unbalanced refcounting
  drm: atmel-hlcdc: remove useless pm_runtime_put_sync in probe
  drm: atmel-hlcdc: reset layer A2Q and UPDATE bits when disabling it
  drm: Fix deadlock due to getconnector locking changes
  drm/i915: Dell Chromebook 11 has PWM backlight
  ...
dabrace added a commit that referenced this pull request Mar 1, 2015
@dabrace dabrace merged commit 08c686f into dabrace:master Mar 1, 2015
dabrace pushed a commit that referenced this pull request Sep 3, 2015
While running net-next I hit this:
[  634.073119] ===============================
[  634.073150] [ INFO: suspicious RCU usage. ]
[  634.073182] 4.2.0-rc6+ #45 Not tainted
[  634.073213] -------------------------------
[  634.073244] include/net/vrf.h:38 suspicious rcu_dereference_check()
usage!
[  634.073274]
               other info that might help us debug this:

[  634.073307]
               rcu_scheduler_active = 1, debug_locks = 1
[  634.073338] 2 locks held by swapper/0/0:
[  634.073369]  #0:  (((&n->timer))){+.-...}, at: [<ffffffff8112bc35>]
call_timer_fn+0x5/0x480
[  634.073412]  #1:  (slock-AF_INET){+.-...}, at: [<ffffffff8174f0f5>]
icmp_send+0x155/0x5f0
[  634.073450]
               stack backtrace:
[  634.073483] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.2.0-rc6+ #45
[  634.073514] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS
VirtualBox 12/01/2006
[  634.073545]  0000000000000000 0593ba8242d9ace4 ffff88002fc03b48
ffffffff81803f1b
[  634.073612]  0000000000000000 ffffffff81e12500 ffff88002fc03b78
ffffffff811003c5
[  634.073642]  0000000000000000 ffff88002ec4e600 ffffffff81f00f80
ffff88002fc03cf0
[  634.073669] Call Trace:
[  634.073694]  <IRQ>  [<ffffffff81803f1b>] dump_stack+0x4c/0x65
[  634.073728]  [<ffffffff811003c5>] lockdep_rcu_suspicious+0xc5/0x100
[  634.073763]  [<ffffffff8174eb56>] icmp_route_lookup+0x176/0x5c0
[  634.073793]  [<ffffffff8174f2fb>] ? icmp_send+0x35b/0x5f0
[  634.073818]  [<ffffffff8174f274>] ? icmp_send+0x2d4/0x5f0
[  634.073844]  [<ffffffff8174f3ce>] icmp_send+0x42e/0x5f0
[  634.073873]  [<ffffffff8170b662>] ipv4_link_failure+0x22/0xa0
[  634.073899]  [<ffffffff8174bdda>] arp_error_report+0x3a/0x80
[  634.073926]  [<ffffffff816d6100>] ? neigh_lookup+0x2c0/0x2c0
[  634.073952]  [<ffffffff816d396e>] neigh_invalidate+0x8e/0x110
[  634.073984]  [<ffffffff816d62ae>] neigh_timer_handler+0x1ae/0x290
[  634.074013]  [<ffffffff816d6100>] ? neigh_lookup+0x2c0/0x2c0
[  634.074013]  [<ffffffff8112bce3>] call_timer_fn+0xb3/0x480
[  634.074013]  [<ffffffff8112bc35>] ? call_timer_fn+0x5/0x480
[  634.074013]  [<ffffffff816d6100>] ? neigh_lookup+0x2c0/0x2c0
[  634.074013]  [<ffffffff8112c2bc>] run_timer_softirq+0x20c/0x430
[  634.074013]  [<ffffffff810af50e>] __do_softirq+0xde/0x630
[  634.074013]  [<ffffffff810afc97>] irq_exit+0x117/0x120
[  634.074013]  [<ffffffff81810976>] smp_apic_timer_interrupt+0x46/0x60
[  634.074013]  [<ffffffff8180e950>] apic_timer_interrupt+0x70/0x80
[  634.074013]  <EOI>  [<ffffffff8106b9d6>] ? native_safe_halt+0x6/0x10
[  634.074013]  [<ffffffff81101d8d>] ? trace_hardirqs_on+0xd/0x10
[  634.074013]  [<ffffffff81027d43>] default_idle+0x23/0x200
[  634.074013]  [<ffffffff8102852f>] arch_cpu_idle+0xf/0x20
[  634.074013]  [<ffffffff810f89ba>] default_idle_call+0x2a/0x40
[  634.074013]  [<ffffffff810f8dcc>] cpu_startup_entry+0x39c/0x4c0
[  634.074013]  [<ffffffff817f9cad>] rest_init+0x13d/0x150
[  634.074013]  [<ffffffff81f69038>] start_kernel+0x4a8/0x4c9
[  634.074013]  [<ffffffff81f68120>] ?
early_idt_handler_array+0x120/0x120
[  634.074013]  [<ffffffff81f68339>] x86_64_start_reservations+0x2a/0x2c
[  634.074013]  [<ffffffff81f68485>] x86_64_start_kernel+0x14a/0x16d

It would seem vrf_master_ifindex_rcu() can be called without RCU held in
other contexts as well so introduce a new helper which acquires rcu and
returns the ifindex.
Also add curly braces around both the "if" and "else" parts as per the
style guide.

Signed-off-by: Nikolay Aleksandrov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
dabrace pushed a commit that referenced this pull request Sep 9, 2015
Wanpeng Li reported a race between soft_offline_page() and
unpoison_memory(), which causes the following kernel panic:

   BUG: Bad page state in process bash  pfn:97000
   page:ffffea00025c0000 count:0 mapcount:1 mapping:          (null) index:0x7f4fdbe00
   flags: 0x1fffff80080048(uptodate|active|swapbacked)
   page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set
   bad because of flags:
   flags: 0x40(active)
   Modules linked in: snd_hda_codec_hdmi i915 rpcsec_gss_krb5 nfsv4 dns_resolver bnep rfcomm nfsd bluetooth auth_rpcgss nfs_acl nfs rfkill lockd grace sunrpc i2c_algo_bit drm_kms_helper snd_hda_codec_realtek snd_hda_codec_generic drm snd_hda_intel fscache snd_hda_codec x86_pkg_temp_thermal coretemp kvm_intel snd_hda_core snd_hwdep kvm snd_pcm snd_seq_dummy snd_seq_oss crct10dif_pclmul snd_seq_midi crc32_pclmul snd_seq_midi_event ghash_clmulni_intel snd_rawmidi aesni_intel lrw gf128mul snd_seq glue_helper ablk_helper snd_seq_device cryptd fuse snd_timer dcdbas serio_raw mei_me parport_pc snd mei ppdev i2c_core video lp soundcore parport lpc_ich shpchp mfd_core ext4 mbcache jbd2 sd_mod e1000e ahci ptp libahci crc32c_intel libata pps_core
   CPU: 3 PID: 2211 Comm: bash Not tainted 4.2.0-rc5-mm1+ #45
   Hardware name: Dell Inc. OptiPlex 7020/0F5C5X, BIOS A03 01/08/2015
   Call Trace:
     dump_stack+0x48/0x5c
     bad_page+0xe6/0x140
     free_pages_prepare+0x2f9/0x320
     ? uncharge_list+0xdd/0x100
     free_hot_cold_page+0x40/0x170
     __put_single_page+0x20/0x30
     put_page+0x25/0x40
     unmap_and_move+0x1a6/0x1f0
     migrate_pages+0x100/0x1d0
     ? kill_procs+0x100/0x100
     ? unlock_page+0x6f/0x90
     __soft_offline_page+0x127/0x2a0
     soft_offline_page+0xa6/0x200

This race is explained like below:

  CPU0                    CPU1

  soft_offline_page
  __soft_offline_page
  TestSetPageHWPoison
                        unpoison_memory
                        PageHWPoison check (true)
                        TestClearPageHWPoison
                        put_page    -> release refcount held by get_hwpoison_page in unpoison_memory
                        put_page    -> release refcount held by isolate_lru_page in __soft_offline_page
  migrate_pages

The second put_page() releases refcount held by isolate_lru_page() which
will lead to unmap_and_move() releases the last refcount of page and w/
mapcount still 1 since try_to_unmap() is not called if there is only one
user map the page.  Anyway, the page refcount and mapcount will still
mess if the page is mapped by multiple users.

This race was introduced by commit 4491f71 ("mm/memory-failure: set
PageHWPoison before migrate_pages()"), which focuses on preventing the
reuse of successfully migrated page.  Before this commit we prevent the
reuse by changing the migratetype to MIGRATE_ISOLATE during soft
offlining, which has the following problems, so simply reverting the
commit is not a best option:

  1) it doesn't eliminate the reuse completely, because
     set_migratetype_isolate() can fail to set MIGRATE_ISOLATE to the
     target page if the pageblock of the page contains one or more
     unmovable pages (i.e.  has_unmovable_pages() returns true).

  2) the original code changes migratetype to MIGRATE_ISOLATE
     forcibly, and sets it to MIGRATE_MOVABLE forcibly after soft offline,
     regardless of the original migratetype state, which could impact
     other subsystems like memory hotplug or compaction.

This patch moves PageSetHWPoison just after put_page() in
unmap_and_move(), which closes up the reported race window and minimizes
another race window b/w SetPageHWPoison and reallocation (which causes
the reuse of soft-offlined page.) The latter race window still exists
but it's acceptable, because it's rare and effectively the same as
ordinary "containment failure" case even if it happens, so keep the
window open is acceptable.

Fixes: 4491f71 ("mm/memory-failure: set PageHWPoison before migrate_pages()")
Signed-off-by: Wanpeng Li <[email protected]>
Signed-off-by: Naoya Horiguchi <[email protected]>
Reported-by: Wanpeng Li <[email protected]>
Tested-by: Wanpeng Li <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
dabrace pushed a commit that referenced this pull request Jan 15, 2016
Currently if you are in xmon without an oops etc. to view the kernel
version you have to type "d $linux_banner" - not necessarily obvious. As
this is useful information, append to the output of "e" command.

Example output:
  $mon> e
  cpu 0x1: Vector: 0  at [c0000000f879ba80]
      pc: c000000000081718: sysrq_handle_xmon+0x68/0x80
      lr: c000000000081718: sysrq_handle_xmon+0x68/0x80
      sp: c0000000f879bbe0
     msr: 8000000000009033
    current = 0xc0000000f604d5c0
    paca    = 0xc00000000fdc0480	 softe: 0	 irq_happened: 0x01
      pid   = 2467, comm = bash
  Linux version 4.4.0-rc2-00008-gc51af91c3ab3-dirty (rashmica@circle) (gcc
  version 5.1.1 20150629 (GCC) ) #45 SMP Wed Nov 25 10:25:12 AEDT 2015

Signed-off-by: Rashmica Gupta <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
dabrace pushed a commit that referenced this pull request Mar 22, 2016
When doing test with fstests/generic/068 in inline_dentry enabled f2fs,
following oops dmesg will be reported:

 ------------[ cut here ]------------
 WARNING: CPU: 5 PID: 11841 at fs/inode.c:273 drop_nlink+0x49/0x50()
 Modules linked in: f2fs(O) ip6table_filter ip6_tables ebtable_nat ebtables nf_conntrack_ipv4 nf_defrag_ipv4 xt_state
 CPU: 5 PID: 11841 Comm: fsstress Tainted: G           O    4.5.0-rc1 #45
 Hardware name: Hewlett-Packard HP Z220 CMT Workstation/1790, BIOS K51 v01.61 05/16/2013
  0000000000000111 ffff88009cdf7ae8 ffffffff813e5944 0000000000002e41
  0000000000000000 0000000000000111 0000000000000000 ffff88009cdf7b28
  ffffffff8106a587 ffff88009cdf7b58 ffff8804078fe180 ffff880374a64e00
 Call Trace:
  [<ffffffff813e5944>] dump_stack+0x48/0x64
  [<ffffffff8106a587>] warn_slowpath_common+0x97/0xe0
  [<ffffffff8106a5ea>] warn_slowpath_null+0x1a/0x20
  [<ffffffff81231039>] drop_nlink+0x49/0x50
  [<ffffffffa07b95b4>] f2fs_rename2+0xe04/0x10c0 [f2fs]
  [<ffffffff81231ff1>] ? lock_two_nondirectories+0x81/0x90
  [<ffffffff813f454d>] ? lockref_get+0x1d/0x30
  [<ffffffff81220f70>] vfs_rename+0x2e0/0x640
  [<ffffffff8121f9db>] ? lookup_dcache+0x3b/0xd0
  [<ffffffff810b8e41>] ? update_fast_ctr+0x21/0x40
  [<ffffffff8134ff12>] ? security_path_rename+0xa2/0xd0
  [<ffffffff81224af6>] SYSC_renameat2+0x4b6/0x540
  [<ffffffff810ba8ed>] ? trace_hardirqs_off+0xd/0x10
  [<ffffffff810022ba>] ? exit_to_usermode_loop+0x7a/0xd0
  [<ffffffff817e0ade>] ? int_ret_from_sys_call+0x52/0x9f
  [<ffffffff810bdc90>] ? trace_hardirqs_on_caller+0x100/0x1c0
  [<ffffffff81224b8e>] SyS_renameat2+0xe/0x10
  [<ffffffff8121f08e>] SyS_rename+0x1e/0x20
  [<ffffffff817e0957>] entry_SYSCALL_64_fastpath+0x12/0x6f
 ---[ end trace 2b31e17995404e42 ]---

This is because: in the same inline directory, when we renaming one file
from source name to target name which is not existed, once space of inline
dentry is not enough, inline conversion will be triggered, after that all
data in inline dentry will be moved to normal dentry page.

After attaching the new entry in coverted dentry page, still we try to
remove old entry in original inline dentry, since old entry has been
moved, so it obviously doesn't make any effect, result in remaining old
entry in converted dentry page.

Now, we have two valid dentries pointed to the same inode which has nlink
value of 1, deleting them both, above warning appears.

This issue can be reproduced easily as below steps:
1. mount f2fs with inline_dentry option
2. mkdir dir
3. touch 180 files named [001-180] in dir
4. rename dir/180 dir/181
5. rm dir/180 dir/181

Signed-off-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
dabrace pushed a commit that referenced this pull request Mar 6, 2017
Running with KASAN and crypto tests currently gives

 BUG: KASAN: global-out-of-bounds in __test_aead+0x9d9/0x2200 at addr ffffffff8212fca0
 Read of size 16 by task cryptomgr_test/1107
 Address belongs to variable 0xffffffff8212fca0
 CPU: 0 PID: 1107 Comm: cryptomgr_test Not tainted 4.10.0+ #45
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.1-1.fc24 04/01/2014
 Call Trace:
  dump_stack+0x63/0x8a
  kasan_report.part.1+0x4a7/0x4e0
  ? __test_aead+0x9d9/0x2200
  ? crypto_ccm_init_crypt+0x218/0x3c0 [ccm]
  kasan_report+0x20/0x30
  check_memory_region+0x13c/0x1a0
  memcpy+0x23/0x50
  __test_aead+0x9d9/0x2200
  ? kasan_unpoison_shadow+0x35/0x50
  ? alg_test_akcipher+0xf0/0xf0
  ? crypto_skcipher_init_tfm+0x2e3/0x310
  ? crypto_spawn_tfm2+0x37/0x60
  ? crypto_ccm_init_tfm+0xa9/0xd0 [ccm]
  ? crypto_aead_init_tfm+0x7b/0x90
  ? crypto_alloc_tfm+0xc4/0x190
  test_aead+0x28/0xc0
  alg_test_aead+0x54/0xd0
  alg_test+0x1eb/0x3d0
  ? alg_find_test+0x90/0x90
  ? __sched_text_start+0x8/0x8
  ? __wake_up_common+0x70/0xb0
  cryptomgr_test+0x4d/0x60
  kthread+0x173/0x1c0
  ? crypto_acomp_scomp_free_ctx+0x60/0x60
  ? kthread_create_on_node+0xa0/0xa0
  ret_from_fork+0x2c/0x40
 Memory state around the buggy address:
  ffffffff8212fb80: 00 00 00 00 01 fa fa fa fa fa fa fa 00 00 00 00
  ffffffff8212fc00: 00 01 fa fa fa fa fa fa 00 00 00 00 01 fa fa fa
 >ffffffff8212fc80: fa fa fa fa 00 05 fa fa fa fa fa fa 00 00 00 00
                                   ^
  ffffffff8212fd00: 01 fa fa fa fa fa fa fa 00 00 00 00 01 fa fa fa
  ffffffff8212fd80: fa fa fa fa 00 00 00 00 00 05 fa fa fa fa fa fa

This always happens on the same IV which is less than 16 bytes.

Per Ard,

"CCM IVs are 16 bytes, but due to the way they are constructed
internally, the final couple of bytes of input IV are dont-cares.

Apparently, we do read all 16 bytes, which triggers the KASAN errors."

Fix this by padding the IV with null bytes to be at least 16 bytes.

Cc: [email protected]
Fixes: 0bc5a6c ("crypto: testmgr - Disable rfc4309 test and convert
test vectors")
Acked-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Laura Abbott <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
dabrace pushed a commit that referenced this pull request Jun 5, 2017
Xiaolong Ye's kernel test robot detected the following Oops:
[  299.158991] BUG: scheduling while atomic: mount.nfs/9387/0x00000002
[  299.169587] 2 locks held by mount.nfs/9387:
[  299.176165]  #0:  (nfs_clid_init_mutex){......}, at: [<ffffffff8130cc92>] nfs4_discover_server_trunking+0x47/0x1fc
[  299.201802]  #1:  (&(&nn->nfs_client_lock)->rlock){......}, at: [<ffffffff813125fa>] nfs40_walk_client_list+0x2e9/0x338
[  299.221979] CPU: 0 PID: 9387 Comm: mount.nfs Not tainted 4.11.0-rc7-00021-g14d1bbb #45
[  299.235584] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-20161025_171302-gandalf 04/01/2014
[  299.251176] Call Trace:
[  299.255192]  dump_stack+0x61/0x7e
[  299.260416]  __schedule_bug+0x65/0x74
[  299.266208]  __schedule+0x5d/0x87c
[  299.271883]  schedule+0x89/0x9a
[  299.276937]  schedule_timeout+0x232/0x289
[  299.283223]  ? detach_if_pending+0x10b/0x10b
[  299.289935]  schedule_timeout_uninterruptible+0x2a/0x2c
[  299.298266]  ? put_rpccred+0x3e/0x115
[  299.304327]  ? schedule_timeout_uninterruptible+0x2a/0x2c
[  299.312851]  msleep+0x1e/0x22
[  299.317612]  nfs4_discover_server_trunking+0x102/0x1fc
[  299.325644]  nfs4_init_client+0x13f/0x194

It looks as if we recently added a spin_lock() leak to
nfs40_walk_client_list() when cleaning up the code.

Reported-by: kernel test robot <[email protected]>
Fixes: 14d1bbb ("NFS: Create a common nfs4_match_client() function")
Cc: Anna Schumaker <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
dabrace pushed a commit that referenced this pull request Nov 17, 2017
When running the crash tool on a s390 live system we get a kernel panic
for reading memory within the kernel image:

 # uname -a
   Linux r3545011 4.14.0-rc8-00066-g1c9dbd4615fd #45 SMP PREEMPT Fri Nov 10 16:16:22 CET 2017 s390x s390x s390x GNU/Linux
 # crash /boot/vmlinux-devel /dev/mem
 # crash> rd 0x100000

 usercopy: kernel memory exposure attempt detected from 0000000000100000 (<kernel text>) (8 bytes)
 ------------[ cut here ]------------
 kernel BUG at mm/usercopy.c:72!
 illegal operation: 0001 ilc:1 [#1] PREEMPT SMP.
 Modules linked in:
 CPU: 0 PID: 1461 Comm: crash Not tainted 4.14.0-rc8-00066-g1c9dbd4615fd-dirty #46
 Hardware name: IBM 2827 H66 706 (z/VM 6.3.0)
 task: 000000001ad10100 task.stack: 000000001df78000
 Krnl PSW : 0704d00180000000 000000000038165c (__check_object_size+0x164/0x1d0)
            R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 RI:0 EA:3
 Krnl GPRS: 0000000012440e1d 0000000080000000 0000000000000061 00000000001cabc0
            00000000001cc6d6 0000000000000000 0000000000cc4ed2 0000000000001000
            000003ffc22fdd20 0000000000000008 0000000000100008 0000000000000001
            0000000000000008 0000000000100000 0000000000381658 000000001df7bc90
 Krnl Code: 000000000038164c: c020004a1c4a        larl    %r2,cc4ee0
            0000000000381652: c0e5fff2581b        brasl   %r14,1cc688
           #0000000000381658: a7f40001            brc     15,38165a
           >000000000038165c: eb42000c000c        srlg    %r4,%r2,12
            0000000000381662: eb32001c000c        srlg    %r3,%r2,28
            0000000000381668: c0110003ffff        lgfi    %r1,262143
            000000000038166e: ec31ff752065        clgrj   %r3,%r1,2,381558
            0000000000381674: a7f4ff67            brc     15,381542
 Call Trace:
 ([<0000000000381658>] __check_object_size+0x160/0x1d0)
  [<000000000082263a>] read_mem+0xaa/0x130.
  [<0000000000386182>] __vfs_read+0x42/0x168.
  [<000000000038632e>] vfs_read+0x86/0x140.
  [<0000000000386a26>] SyS_read+0x66/0xc0.
  [<0000000000ace6a4>] system_call+0xc4/0x2b0.
 INFO: lockdep is turned off.
 Last Breaking-Event-Address:
  [<0000000000381658>] __check_object_size+0x160/0x1d0

 Kernel panic - not syncing: Fatal exception: panic_on_oops

With CONFIG_HARDENED_USERCOPY copy_to_user() checks in __check_object_size()
if the source address is within the kernel image. When the crash tool reads
from 0x100000, this check leads to the kernel BUG().

So disable the kernel config option until this bug is fixed.

Corresponding bug report on LKML: https://lkml.org/lkml/2017/11/10/341

Signed-off-by: Michael Holzheu <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
dabrace pushed a commit that referenced this pull request Mar 23, 2018
Prior to access UCMA commands, the context should be initialized
and connected to CM_ID with ucma_create_id(). In case user skips
this step, he can provide non-valid ctx without CM_ID and cause
to multiple NULL dereferences.

Also there are situations where the create_id can be raced with
other user access, ensure that the context is only shared to
other threads once it is fully initialized to avoid the races.

[  109.088108] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
[  109.090315] IP: ucma_connect+0x138/0x1d0
[  109.092595] PGD 80000001dc02d067 P4D 80000001dc02d067 PUD 1da9ef067 PMD 0
[  109.095384] Oops: 0000 [#1] SMP KASAN PTI
[  109.097834] CPU: 0 PID: 663 Comm: uclose Tainted: G    B 4.16.0-rc1-00062-g2975d5de6428 #45
[  109.100816] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014
[  109.105943] RIP: 0010:ucma_connect+0x138/0x1d0
[  109.108850] RSP: 0018:ffff8801c8567a80 EFLAGS: 00010246
[  109.111484] RAX: 0000000000000000 RBX: 1ffff100390acf50 RCX: ffffffff9d7812e2
[  109.114496] RDX: 1ffffffff3f507a5 RSI: 0000000000000297 RDI: 0000000000000297
[  109.117490] RBP: ffff8801daa15600 R08: 0000000000000000 R09: ffffed00390aceeb
[  109.120429] R10: 0000000000000001 R11: ffffed00390aceea R12: 0000000000000000
[  109.123318] R13: 0000000000000120 R14: ffff8801de6459c0 R15: 0000000000000118
[  109.126221] FS:  00007fabb68d6700(0000) GS:ffff8801e5c00000(0000) knlGS:0000000000000000
[  109.129468] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  109.132523] CR2: 0000000000000020 CR3: 00000001d45d8003 CR4: 00000000003606b0
[  109.135573] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  109.138716] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  109.142057] Call Trace:
[  109.144160]  ? ucma_listen+0x110/0x110
[  109.146386]  ? wake_up_q+0x59/0x90
[  109.148853]  ? futex_wake+0x10b/0x2a0
[  109.151297]  ? save_stack+0x89/0xb0
[  109.153489]  ? _copy_from_user+0x5e/0x90
[  109.155500]  ucma_write+0x174/0x1f0
[  109.157933]  ? ucma_resolve_route+0xf0/0xf0
[  109.160389]  ? __mod_node_page_state+0x1d/0x80
[  109.162706]  __vfs_write+0xc4/0x350
[  109.164911]  ? kernel_read+0xa0/0xa0
[  109.167121]  ? path_openat+0x1b10/0x1b10
[  109.169355]  ? fsnotify+0x899/0x8f0
[  109.171567]  ? fsnotify_unmount_inodes+0x170/0x170
[  109.174145]  ? __fget+0xa8/0xf0
[  109.177110]  vfs_write+0xf7/0x280
[  109.179532]  SyS_write+0xa1/0x120
[  109.181885]  ? SyS_read+0x120/0x120
[  109.184482]  ? compat_start_thread+0x60/0x60
[  109.187124]  ? SyS_read+0x120/0x120
[  109.189548]  do_syscall_64+0xeb/0x250
[  109.192178]  entry_SYSCALL_64_after_hwframe+0x21/0x86
[  109.194725] RIP: 0033:0x7fabb61ebe99
[  109.197040] RSP: 002b:00007fabb68d5e98 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
[  109.200294] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fabb61ebe99
[  109.203399] RDX: 0000000000000120 RSI: 00000000200001c0 RDI: 0000000000000004
[  109.206548] RBP: 00007fabb68d5ec0 R08: 0000000000000000 R09: 0000000000000000
[  109.209902] R10: 0000000000000000 R11: 0000000000000202 R12: 00007fabb68d5fc0
[  109.213327] R13: 0000000000000000 R14: 00007fff40ab2430 R15: 00007fabb68d69c0
[  109.216613] Code: 88 44 24 2c 0f b6 84 24 6e 01 00 00 88 44 24 2d 0f
b6 84 24 69 01 00 00 88 44 24 2e 8b 44 24 60 89 44 24 30 e8 da f6 06 ff
31 c0 <66> 41 83 7c 24 20 1b 75 04 8b 44 24 64 48 8d 74 24 20 4c 89 e7
[  109.223602] RIP: ucma_connect+0x138/0x1d0 RSP: ffff8801c8567a80
[  109.226256] CR2: 0000000000000020

Fixes: 7521663 ("RDMA/cma: Export rdma cm interface to userspace")
Reported-by: <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
dabrace pushed a commit that referenced this pull request May 21, 2018
syzbot caught an infinite recursion in nsh_gso_segment().

Problem here is that we need to make sure the NSH header is of
reasonable length.

BUG: MAX_LOCK_DEPTH too low!
turning off the locking correctness validator.
depth: 48  max: 48!
48 locks held by syz-executor0/10189:
 #0:         (ptrval) (rcu_read_lock_bh){....}, at: __dev_queue_xmit+0x30f/0x34c0 net/core/dev.c:3517
 #1:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #1:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #2:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #2:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #3:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #3:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #4:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #4:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #5:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #5:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #6:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #6:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #7:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #7:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #8:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #8:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #9:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #9:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #10:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #10:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #11:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #11:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #12:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #12:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #13:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #13:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #14:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #14:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #15:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #15:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #16:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #16:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #17:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #17:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #18:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #18:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #19:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #19:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #20:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #20:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #21:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #21:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #22:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #22:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #23:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #23:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #24:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #24:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #25:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #25:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #26:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #26:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #27:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #27:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #28:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #28:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #29:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #29:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #30:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #30:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #31:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #31:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
dccp_close: ABORT with 65423 bytes unread
 #32:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #32:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #33:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #33:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #34:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #34:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #35:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #35:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #36:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #36:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #37:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #37:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #38:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #38:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #39:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #39:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #40:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #40:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #41:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #41:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #42:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #42:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #43:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #43:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #44:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #44:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #45:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #45:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #46:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #46:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #47:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #47:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
INFO: lockdep is turned off.
CPU: 1 PID: 10189 Comm: syz-executor0 Not tainted 4.17.0-rc2+ #26
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1b9/0x294 lib/dump_stack.c:113
 __lock_acquire+0x1788/0x5140 kernel/locking/lockdep.c:3449
 lock_acquire+0x1dc/0x520 kernel/locking/lockdep.c:3920
 rcu_lock_acquire include/linux/rcupdate.h:246 [inline]
 rcu_read_lock include/linux/rcupdate.h:632 [inline]
 skb_mac_gso_segment+0x25b/0x720 net/core/dev.c:2789
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 __skb_gso_segment+0x3bb/0x870 net/core/dev.c:2865
 skb_gso_segment include/linux/netdevice.h:4025 [inline]
 validate_xmit_skb+0x54d/0xd90 net/core/dev.c:3118
 validate_xmit_skb_list+0xbf/0x120 net/core/dev.c:3168
 sch_direct_xmit+0x354/0x11e0 net/sched/sch_generic.c:312
 qdisc_restart net/sched/sch_generic.c:399 [inline]
 __qdisc_run+0x741/0x1af0 net/sched/sch_generic.c:410
 __dev_xmit_skb net/core/dev.c:3243 [inline]
 __dev_queue_xmit+0x28ea/0x34c0 net/core/dev.c:3551
 dev_queue_xmit+0x17/0x20 net/core/dev.c:3616
 packet_snd net/packet/af_packet.c:2951 [inline]
 packet_sendmsg+0x40f8/0x6070 net/packet/af_packet.c:2976
 sock_sendmsg_nosec net/socket.c:629 [inline]
 sock_sendmsg+0xd5/0x120 net/socket.c:639
 __sys_sendto+0x3d7/0x670 net/socket.c:1789
 __do_sys_sendto net/socket.c:1801 [inline]
 __se_sys_sendto net/socket.c:1797 [inline]
 __x64_sys_sendto+0xe1/0x1a0 net/socket.c:1797
 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: c411ed8 ("nsh: add GSO support")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Jiri Benc <[email protected]>
Reported-by: syzbot <[email protected]>
Acked-by: Jiri Benc <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
dabrace pushed a commit that referenced this pull request Jun 4, 2018
syzkaller reports for buffer overflow for interface name
when starting sync daemons [1]

What we do is that we copy user structure into larger stack
buffer but later we search NUL past the stack buffer.
The same happens for sched_name when adding/editing virtual server.

We are restricted by IP_VS_SCHEDNAME_MAXLEN and IP_VS_IFNAME_MAXLEN
being used as size in include/uapi/linux/ip_vs.h, so they
include the space for NUL.

As using strlcpy is wrong for unsafe source, replace it with
strscpy and add checks to return EINVAL if source string is not
NUL-terminated. The incomplete strlcpy fix comes from 2.6.13.

For the netlink interface reduce the len parameter for
IPVS_DAEMON_ATTR_MCAST_IFN and IPVS_SVC_ATTR_SCHED_NAME,
so that we get proper EINVAL.

[1]
kernel BUG at lib/string.c:1052!
invalid opcode: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
    (ftrace buffer empty)
Modules linked in:
CPU: 1 PID: 373 Comm: syz-executor936 Not tainted 4.17.0-rc4+ #45
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
RIP: 0010:fortify_panic+0x13/0x20 lib/string.c:1051
RSP: 0018:ffff8801c976f800 EFLAGS: 00010282
RAX: 0000000000000022 RBX: 0000000000000040 RCX: 0000000000000000
RDX: 0000000000000022 RSI: ffffffff8160f6f1 RDI: ffffed00392edef6
RBP: ffff8801c976f800 R08: ffff8801cf4c62c0 R09: ffffed003b5e4fb0
R10: ffffed003b5e4fb0 R11: ffff8801daf27d87 R12: ffff8801c976fa20
R13: ffff8801c976fae4 R14: ffff8801c976fae0 R15: 000000000000048b
FS:  00007fd99f75e700(0000) GS:ffff8801daf00000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000200001c0 CR3: 00000001d6843000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
  strlen include/linux/string.h:270 [inline]
  strlcpy include/linux/string.h:293 [inline]
  do_ip_vs_set_ctl+0x31c/0x1d00 net/netfilter/ipvs/ip_vs_ctl.c:2388
  nf_sockopt net/netfilter/nf_sockopt.c:106 [inline]
  nf_setsockopt+0x7d/0xd0 net/netfilter/nf_sockopt.c:115
  ip_setsockopt+0xd8/0xf0 net/ipv4/ip_sockglue.c:1253
  udp_setsockopt+0x62/0xa0 net/ipv4/udp.c:2487
  ipv6_setsockopt+0x149/0x170 net/ipv6/ipv6_sockglue.c:917
  tcp_setsockopt+0x93/0xe0 net/ipv4/tcp.c:3057
  sock_common_setsockopt+0x9a/0xe0 net/core/sock.c:3046
  __sys_setsockopt+0x1bd/0x390 net/socket.c:1903
  __do_sys_setsockopt net/socket.c:1914 [inline]
  __se_sys_setsockopt net/socket.c:1911 [inline]
  __x64_sys_setsockopt+0xbe/0x150 net/socket.c:1911
  do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287
  entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x447369
RSP: 002b:00007fd99f75dda8 EFLAGS: 00000246 ORIG_RAX: 0000000000000036
RAX: ffffffffffffffda RBX: 00000000006e39e4 RCX: 0000000000447369
RDX: 000000000000048b RSI: 0000000000000000 RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000000000018 R09: 0000000000000000
R10: 00000000200001c0 R11: 0000000000000246 R12: 00000000006e39e0
R13: 75a1ff93f0896195 R14: 6f745f3168746576 R15: 0000000000000001
Code: 08 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 0b 48 89 df e8 d2 8f 48 fa eb
de 55 48 89 fe 48 c7 c7 60 65 64 88 48 89 e5 e8 91 dd f3 f9 <0f> 0b 90 90
90 90 90 90 90 90 90 90 90 55 48 89 e5 41 57 41 56
RIP: fortify_panic+0x13/0x20 lib/string.c:1051 RSP: ffff8801c976f800

Reported-and-tested-by: [email protected]
Fixes: e4ff675 ("ipvs: add sync_maxlen parameter for the sync daemon")
Fixes: 4da62fc ("[IPVS]: Fix for overflows")
Signed-off-by: Julian Anastasov <[email protected]>
Acked-by: Simon Horman <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
dabrace pushed a commit that referenced this pull request Aug 27, 2018
The Intel SoC DTS uses a hardcoded GSI number, before this commit
it was passing it to request_irq as if it were a linux irq number,
but there is no 1:1 mapping so in essence it was requesting a
random interrupt.

Besides this causing the DTS driver to not actually get an interrupt
if the thermal thresholds are exceeded this also is causing an
interrupt conflict on some devices since the linux irq 86 which is
being requested is already in use, leading to oopses like this:

genirq: Flags mismatch irq 86. 00002001 (soc_dts) vs. 00000083 (volume_down)
CPU: 0 PID: 601 Comm: systemd-udevd Tainted: G         C OE     4.17.0-rc6+ #45
Hardware name: Insyde i86/Type2 - Board Product Name, BIOS CHUWI.D86JLBNR03 01/14/2015
Call Trace:
  dump_stack+0x5c/0x80
  __setup_irq.cold.50+0x4e/0xac
  ? request_threaded_irq+0xad/0x160
  request_threaded_irq+0xf5/0x160
  ? 0xffffffffc0a93000
  intel_soc_thermal_init+0x74/0x1000 [intel_soc_dts_thermal]

This commit makes the intel_soc_dts_thermal.c code call
acpi_register_gsi() to translate the hardcoded IO-APIC GSI number (86)
to a linux irq, so that the dts code uses the right interrupt and we
no longer get an oops about an irq conflict.

Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Zhang Rui <[email protected]>
dabrace pushed a commit that referenced this pull request Nov 12, 2018
Increase kasan instrumented kernel stack size from 32k to 64k. Other
architectures seems to get away with just doubling kernel stack size under
kasan, but on s390 this appears to be not enough due to bigger frame size.
The particular pain point is kasan inlined checks (CONFIG_KASAN_INLINE
vs CONFIG_KASAN_OUTLINE). With inlined checks one particular case hitting
stack overflow is fs sync on xfs filesystem:

 #0 [9a0681e8]  704 bytes  check_usage at 34b1fc
 #1 [9a0684a8]  432 bytes  check_usage at 34c710
 #2 [9a068658]  1048 bytes  validate_chain at 35044a
 #3 [9a068a70]  312 bytes  __lock_acquire at 3559fe
 #4 [9a068ba8]  440 bytes  lock_acquire at 3576ee
 #5 [9a068d60]  104 bytes  _raw_spin_lock at 21b44e0
 #6 [9a068dc8]  1992 bytes  enqueue_entity at 2dbf72
 #7 [9a069590]  1496 bytes  enqueue_task_fair at 2df5f0
 #8 [9a069b68]  64 bytes  ttwu_do_activate at 28f438
 #9 [9a069ba8]  552 bytes  try_to_wake_up at 298c4c
 #10 [9a069dd0]  168 bytes  wake_up_worker at 23f97c
 #11 [9a069e78]  200 bytes  insert_work at 23fc2e
 #12 [9a069f40]  648 bytes  __queue_work at 2487c0
 #13 [9a06a1c8]  200 bytes  __queue_delayed_work at 24db28
 #14 [9a06a290]  248 bytes  mod_delayed_work_on at 24de84
 #15 [9a06a388]  24 bytes  kblockd_mod_delayed_work_on at 153e2a0
 #16 [9a06a3a0]  288 bytes  __blk_mq_delay_run_hw_queue at 158168c
 #17 [9a06a4c0]  192 bytes  blk_mq_run_hw_queue at 1581a3c
 #18 [9a06a580]  184 bytes  blk_mq_sched_insert_requests at 15a2192
 #19 [9a06a638]  1024 bytes  blk_mq_flush_plug_list at 1590f3a
 #20 [9a06aa38]  704 bytes  blk_flush_plug_list at 1555028
 #21 [9a06acf8]  320 bytes  schedule at 219e476
 #22 [9a06ae38]  760 bytes  schedule_timeout at 21b0aac
 #23 [9a06b130]  408 bytes  wait_for_common at 21a1706
 #24 [9a06b2c8]  360 bytes  xfs_buf_iowait at fa1540
 #25 [9a06b430]  256 bytes  __xfs_buf_submit at fadae6
 #26 [9a06b530]  264 bytes  xfs_buf_read_map at fae3f6
 #27 [9a06b638]  656 bytes  xfs_trans_read_buf_map at 10ac9a8
 #28 [9a06b8c8]  304 bytes  xfs_btree_kill_root at e72426
 #29 [9a06b9f8]  288 bytes  xfs_btree_lookup_get_block at e7bc5e
 #30 [9a06bb18]  624 bytes  xfs_btree_lookup at e7e1a6
 #31 [9a06bd88]  2664 bytes  xfs_alloc_ag_vextent_near at dfa070
 #32 [9a06c7f0]  144 bytes  xfs_alloc_ag_vextent at dff3ca
 #33 [9a06c880]  1128 bytes  xfs_alloc_vextent at e05fce
 #34 [9a06cce8]  584 bytes  xfs_bmap_btalloc at e58342
 #35 [9a06cf30]  1336 bytes  xfs_bmapi_write at e618de
 #36 [9a06d468]  776 bytes  xfs_iomap_write_allocate at ff678e
 #37 [9a06d770]  720 bytes  xfs_map_blocks at f82af8
 #38 [9a06da40]  928 bytes  xfs_writepage_map at f83cd6
 #39 [9a06dde0]  320 bytes  xfs_do_writepage at f85872
 #40 [9a06df20]  1320 bytes  write_cache_pages at 73dfe8
 #41 [9a06e448]  208 bytes  xfs_vm_writepages at f7f892
 #42 [9a06e518]  88 bytes  do_writepages at 73fe6a
 #43 [9a06e570]  872 bytes  __writeback_single_inode at a20cb6
 #44 [9a06e8d8]  664 bytes  writeback_sb_inodes at a23be2
 #45 [9a06eb70]  296 bytes  __writeback_inodes_wb at a242e0
 #46 [9a06ec98]  928 bytes  wb_writeback at a2500e
 #47 [9a06f038]  848 bytes  wb_do_writeback at a260ae
 #48 [9a06f388]  536 bytes  wb_workfn at a28228
 #49 [9a06f5a0]  1088 bytes  process_one_work at 24a234
 #50 [9a06f9e0]  1120 bytes  worker_thread at 24ba26
 #51 [9a06fe40]  104 bytes  kthread at 26545a
 #52 [9a06fea8]             kernel_thread_starter at 21b6b62

To be able to increase the stack size to 64k reuse LLILL instruction
in __switch_to function to load 64k - STACK_FRAME_OVERHEAD - __PT_SIZE
(65192) value as unsigned.

Reported-by: Benjamin Block <[email protected]>
Reviewed-by: Heiko Carstens <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
dabrace pushed a commit that referenced this pull request Feb 26, 2019
KASAN has found use-after-free in fixed_mdio_bus_init,
commit 0c692d0 ("drivers/net/phy/mdio_bus.c: call
put_device on device_register() failure") call put_device()
while device_register() fails,give up the last reference
to the device and allow mdiobus_release to be executed
,kfreeing the bus. However in most drives, mdiobus_free
be called to free the bus while mdiobus_register fails.
use-after-free occurs when access bus again, this patch
revert it to let mdiobus_free free the bus.

KASAN report details as below:

BUG: KASAN: use-after-free in mdiobus_free+0x85/0x90 drivers/net/phy/mdio_bus.c:482
Read of size 4 at addr ffff8881dc824d78 by task syz-executor.0/3524

CPU: 1 PID: 3524 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xfa/0x1ce lib/dump_stack.c:113
 print_address_description+0x65/0x270 mm/kasan/report.c:187
 kasan_report+0x149/0x18d mm/kasan/report.c:317
 mdiobus_free+0x85/0x90 drivers/net/phy/mdio_bus.c:482
 fixed_mdio_bus_init+0x283/0x1000 [fixed_phy]
 ? 0xffffffffc0e40000
 ? 0xffffffffc0e40000
 ? 0xffffffffc0e40000
 do_one_initcall+0xfa/0x5ca init/main.c:887
 do_init_module+0x204/0x5f6 kernel/module.c:3460
 load_module+0x66b2/0x8570 kernel/module.c:3808
 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f6215c19c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99
RDX: 0000000000000000 RSI: 0000000020000080 RDI: 0000000000000003
RBP: 00007f6215c19c70 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f6215c1a6bc
R13: 00000000004bcefb R14: 00000000006f7030 R15: 0000000000000004

Allocated by task 3524:
 set_track mm/kasan/common.c:85 [inline]
 __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496
 kmalloc include/linux/slab.h:545 [inline]
 kzalloc include/linux/slab.h:740 [inline]
 mdiobus_alloc_size+0x54/0x1b0 drivers/net/phy/mdio_bus.c:143
 fixed_mdio_bus_init+0x163/0x1000 [fixed_phy]
 do_one_initcall+0xfa/0x5ca init/main.c:887
 do_init_module+0x204/0x5f6 kernel/module.c:3460
 load_module+0x66b2/0x8570 kernel/module.c:3808
 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 3524:
 set_track mm/kasan/common.c:85 [inline]
 __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458
 slab_free_hook mm/slub.c:1409 [inline]
 slab_free_freelist_hook mm/slub.c:1436 [inline]
 slab_free mm/slub.c:2986 [inline]
 kfree+0xe1/0x270 mm/slub.c:3938
 device_release+0x78/0x200 drivers/base/core.c:919
 kobject_cleanup lib/kobject.c:662 [inline]
 kobject_release lib/kobject.c:691 [inline]
 kref_put include/linux/kref.h:67 [inline]
 kobject_put+0x146/0x240 lib/kobject.c:708
 put_device+0x1c/0x30 drivers/base/core.c:2060
 __mdiobus_register+0x483/0x560 drivers/net/phy/mdio_bus.c:382
 fixed_mdio_bus_init+0x26b/0x1000 [fixed_phy]
 do_one_initcall+0xfa/0x5ca init/main.c:887
 do_init_module+0x204/0x5f6 kernel/module.c:3460
 load_module+0x66b2/0x8570 kernel/module.c:3808
 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff8881dc824c80
 which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 248 bytes inside of
 2048-byte region [ffff8881dc824c80, ffff8881dc825480)
The buggy address belongs to the page:
page:ffffea0007720800 count:1 mapcount:0 mapping:ffff8881f6c02800 index:0x0 compound_mapcount: 0
flags: 0x2fffc0000010200(slab|head)
raw: 02fffc0000010200 0000000000000000 0000000500000001 ffff8881f6c02800
raw: 0000000000000000 00000000800f000f 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8881dc824c00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff8881dc824c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8881dc824d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                                                ^
 ffff8881dc824d80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff8881dc824e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

Fixes: 0c692d0 ("drivers/net/phy/mdio_bus.c: call put_device on device_register() failure")
Signed-off-by: YueHaibing <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
dabrace pushed a commit that referenced this pull request Mar 5, 2019
KASAN report this:

BUG: KASAN: null-ptr-deref in nfc_llcp_build_gb+0x37f/0x540 [nfc]
Read of size 3 at addr 0000000000000000 by task syz-executor.0/5401

CPU: 0 PID: 5401 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xfa/0x1ce lib/dump_stack.c:113
 kasan_report+0x171/0x18d mm/kasan/report.c:321
 memcpy+0x1f/0x50 mm/kasan/common.c:130
 nfc_llcp_build_gb+0x37f/0x540 [nfc]
 nfc_llcp_register_device+0x6eb/0xb50 [nfc]
 nfc_register_device+0x50/0x1d0 [nfc]
 nfcsim_device_new+0x394/0x67d [nfcsim]
 ? 0xffffffffc1080000
 nfcsim_init+0x6b/0x1000 [nfcsim]
 do_one_initcall+0xfa/0x5ca init/main.c:887
 do_init_module+0x204/0x5f6 kernel/module.c:3460
 load_module+0x66b2/0x8570 kernel/module.c:3808
 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f9cb79dcc58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99
RDX: 0000000000000000 RSI: 0000000020000280 RDI: 0000000000000003
RBP: 00007f9cb79dcc70 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f9cb79dd6bc
R13: 00000000004bcefb R14: 00000000006f7030 R15: 0000000000000004

nfc_llcp_build_tlv will return NULL on fails, caller should check it,
otherwise will trigger a NULL dereference.

Reported-by: Hulk Robot <[email protected]>
Fixes: eda21f1 ("NFC: Set MIU and RW values from CONNECT and CC LLCP frames")
Fixes: d646960 ("NFC: Initial LLCP support")
Signed-off-by: YueHaibing <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
dabrace pushed a commit that referenced this pull request May 29, 2019
KASAN reports this:

BUG: KASAN: global-out-of-bounds in qedi_dbg_err+0xda/0x330 [qedi]
Read of size 31 at addr ffffffffc12b0ae0 by task syz-executor.0/2429

CPU: 0 PID: 2429 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xfa/0x1ce lib/dump_stack.c:113
 print_address_description+0x1c4/0x270 mm/kasan/report.c:187
 kasan_report+0x149/0x18d mm/kasan/report.c:317
 memcpy+0x1f/0x50 mm/kasan/common.c:130
 qedi_dbg_err+0xda/0x330 [qedi]
 ? 0xffffffffc12d0000
 qedi_init+0x118/0x1000 [qedi]
 ? 0xffffffffc12d0000
 ? 0xffffffffc12d0000
 ? 0xffffffffc12d0000
 do_one_initcall+0xfa/0x5ca init/main.c:887
 do_init_module+0x204/0x5f6 kernel/module.c:3460
 load_module+0x66b2/0x8570 kernel/module.c:3808
 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f2d57e55c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 000000000073bfa0 RCX: 0000000000462e99
RDX: 0000000000000000 RSI: 00000000200003c0 RDI: 0000000000000003
RBP: 00007f2d57e55c70 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f2d57e566bc
R13: 00000000004bcefb R14: 00000000006f7030 R15: 0000000000000004

The buggy address belongs to the variable:
 __func__.67584+0x0/0xffffffffffffd520 [qedi]

Memory state around the buggy address:
 ffffffffc12b0980: fa fa fa fa 00 04 fa fa fa fa fa fa 00 00 05 fa
 ffffffffc12b0a00: fa fa fa fa 00 00 04 fa fa fa fa fa 00 05 fa fa
> ffffffffc12b0a80: fa fa fa fa 00 06 fa fa fa fa fa fa 00 02 fa fa
                                                          ^
 ffffffffc12b0b00: fa fa fa fa 00 00 04 fa fa fa fa fa 00 00 03 fa
 ffffffffc12b0b80: fa fa fa fa 00 00 02 fa fa fa fa fa 00 00 04 fa

Currently the qedi_dbg_* family of functions can overrun the end of the
source string if it is less than the destination buffer length because of
the use of a fixed sized memcpy. Remove the memset/memcpy calls to nfunc
and just use func instead as it is always a null terminated string.

Reported-by: Hulk Robot <[email protected]>
Fixes: ace7f46 ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.")
Signed-off-by: YueHaibing <[email protected]>
Reviewed-by: Dan Carpenter <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
dabrace pushed a commit that referenced this pull request Apr 30, 2020
syzbot wrote:
| =============================
| WARNING: suspicious RCU usage
| 5.7.0-rc1+ #45 Not tainted
| -----------------------------
| net/openvswitch/conntrack.c:1898 RCU-list traversed in non-reader section!!
|
| other info that might help us debug this:
| rcu_scheduler_active = 2, debug_locks = 1
| ...
|
| stack backtrace:
| Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014
| Workqueue: netns cleanup_net
| Call Trace:
| ...
| ovs_ct_exit
| ovs_exit_net
| ops_exit_list.isra.7
| cleanup_net
| process_one_work
| worker_thread

To avoid that warning, invoke the ovs_ct_exit under ovs_lock and add
lockdep_ovsl_is_held as optional lockdep expression.

Link: https://lore.kernel.org/lkml/[email protected]
Fixes: 11efd5c ("openvswitch: Support conntrack zone limit")
Cc: Pravin B Shelar <[email protected]>
Cc: Yi-Hung Wei <[email protected]>
Reported-by: [email protected]
Signed-off-by: Tonghao Zhang <[email protected]>
Acked-by: Pravin B Shelar <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
dabrace pushed a commit that referenced this pull request Jan 19, 2021
While mounting a crafted image provided by user, kernel panics due to
the invalid chunk item whose end is less than start.

  [66.387422] loop: module loaded
  [66.389773] loop0: detected capacity change from 262144 to 0
  [66.427708] BTRFS: device fsid a62e00e8-e94e-4200-8217-12444de93c2e devid 1 transid 12 /dev/loop0 scanned by mount (613)
  [66.431061] BTRFS info (device loop0): disk space caching is enabled
  [66.431078] BTRFS info (device loop0): has skinny extents
  [66.437101] BTRFS error: insert state: end < start 29360127 37748736
  [66.437136] ------------[ cut here ]------------
  [66.437140] WARNING: CPU: 16 PID: 613 at fs/btrfs/extent_io.c:557 insert_state.cold+0x1a/0x46 [btrfs]
  [66.437369] CPU: 16 PID: 613 Comm: mount Tainted: G           O      5.11.0-rc1-custom #45
  [66.437374] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ArchLinux 1.14.0-1 04/01/2014
  [66.437378] RIP: 0010:insert_state.cold+0x1a/0x46 [btrfs]
  [66.437420] RSP: 0018:ffff93e5414c3908 EFLAGS: 00010286
  [66.437427] RAX: 0000000000000000 RBX: 0000000001bfffff RCX: 0000000000000000
  [66.437431] RDX: 0000000000000000 RSI: ffffffffb90d4660 RDI: 00000000ffffffff
  [66.437434] RBP: ffff93e5414c3938 R08: 0000000000000001 R09: 0000000000000001
  [66.437438] R10: ffff93e5414c3658 R11: 0000000000000000 R12: ffff8ec782d72aa0
  [66.437441] R13: ffff8ec78bc71628 R14: 0000000000000000 R15: 0000000002400000
  [66.437447] FS:  00007f01386a8580(0000) GS:ffff8ec809000000(0000) knlGS:0000000000000000
  [66.437451] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [66.437455] CR2: 00007f01382fa000 CR3: 0000000109a34000 CR4: 0000000000750ee0
  [66.437460] PKRU: 55555554
  [66.437464] Call Trace:
  [66.437475]  set_extent_bit+0x652/0x740 [btrfs]
  [66.437539]  set_extent_bits_nowait+0x1d/0x20 [btrfs]
  [66.437576]  add_extent_mapping+0x1e0/0x2f0 [btrfs]
  [66.437621]  read_one_chunk+0x33c/0x420 [btrfs]
  [66.437674]  btrfs_read_chunk_tree+0x6a4/0x870 [btrfs]
  [66.437708]  ? kvm_sched_clock_read+0x18/0x40
  [66.437739]  open_ctree+0xb32/0x1734 [btrfs]
  [66.437781]  ? bdi_register_va+0x1b/0x20
  [66.437788]  ? super_setup_bdi_name+0x79/0xd0
  [66.437810]  btrfs_mount_root.cold+0x12/0xeb [btrfs]
  [66.437854]  ? __kmalloc_track_caller+0x217/0x3b0
  [66.437873]  legacy_get_tree+0x34/0x60
  [66.437880]  vfs_get_tree+0x2d/0xc0
  [66.437888]  vfs_kern_mount.part.0+0x78/0xc0
  [66.437897]  vfs_kern_mount+0x13/0x20
  [66.437902]  btrfs_mount+0x11f/0x3c0 [btrfs]
  [66.437940]  ? kfree+0x5ff/0x670
  [66.437944]  ? __kmalloc_track_caller+0x217/0x3b0
  [66.437962]  legacy_get_tree+0x34/0x60
  [66.437974]  vfs_get_tree+0x2d/0xc0
  [66.437983]  path_mount+0x48c/0xd30
  [66.437998]  __x64_sys_mount+0x108/0x140
  [66.438011]  do_syscall_64+0x38/0x50
  [66.438018]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
  [66.438023] RIP: 0033:0x7f0138827f6e
  [66.438033] RSP: 002b:00007ffecd79edf8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
  [66.438040] RAX: ffffffffffffffda RBX: 00007f013894c264 RCX: 00007f0138827f6e
  [66.438044] RDX: 00005593a4a41360 RSI: 00005593a4a33690 RDI: 00005593a4a3a6c0
  [66.438047] RBP: 00005593a4a33440 R08: 0000000000000000 R09: 0000000000000001
  [66.438050] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
  [66.438054] R13: 00005593a4a3a6c0 R14: 00005593a4a41360 R15: 00005593a4a33440
  [66.438078] irq event stamp: 18169
  [66.438082] hardirqs last  enabled at (18175): [<ffffffffb81154bf>] console_unlock+0x4ff/0x5f0
  [66.438088] hardirqs last disabled at (18180): [<ffffffffb8115427>] console_unlock+0x467/0x5f0
  [66.438092] softirqs last  enabled at (16910): [<ffffffffb8a00fe2>] asm_call_irq_on_stack+0x12/0x20
  [66.438097] softirqs last disabled at (16905): [<ffffffffb8a00fe2>] asm_call_irq_on_stack+0x12/0x20
  [66.438103] ---[ end trace e114b111db64298b ]---
  [66.438107] BTRFS error: found node 12582912 29360127 on insert of 37748736 29360127
  [66.438127] BTRFS critical: panic in extent_io_tree_panic:679: locking error: extent tree was modified by another thread while locked (errno=-17 Object already exists)
  [66.441069] ------------[ cut here ]------------
  [66.441072] kernel BUG at fs/btrfs/extent_io.c:679!
  [66.442064] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
  [66.443018] CPU: 16 PID: 613 Comm: mount Tainted: G        W  O      5.11.0-rc1-custom #45
  [66.444538] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ArchLinux 1.14.0-1 04/01/2014
  [66.446223] RIP: 0010:extent_io_tree_panic.isra.0+0x23/0x25 [btrfs]
  [66.450878] RSP: 0018:ffff93e5414c3948 EFLAGS: 00010246
  [66.451840] RAX: 0000000000000000 RBX: 0000000001bfffff RCX: 0000000000000000
  [66.453141] RDX: 0000000000000000 RSI: ffffffffb90d4660 RDI: 00000000ffffffff
  [66.454445] RBP: ffff93e5414c3948 R08: 0000000000000001 R09: 0000000000000001
  [66.455743] R10: ffff93e5414c3658 R11: 0000000000000000 R12: ffff8ec782d728c0
  [66.457055] R13: ffff8ec78bc71628 R14: ffff8ec782d72aa0 R15: 0000000002400000
  [66.458356] FS:  00007f01386a8580(0000) GS:ffff8ec809000000(0000) knlGS:0000000000000000
  [66.459841] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [66.460895] CR2: 00007f01382fa000 CR3: 0000000109a34000 CR4: 0000000000750ee0
  [66.462196] PKRU: 55555554
  [66.462692] Call Trace:
  [66.463139]  set_extent_bit.cold+0x30/0x98 [btrfs]
  [66.464049]  set_extent_bits_nowait+0x1d/0x20 [btrfs]
  [66.490466]  add_extent_mapping+0x1e0/0x2f0 [btrfs]
  [66.514097]  read_one_chunk+0x33c/0x420 [btrfs]
  [66.534976]  btrfs_read_chunk_tree+0x6a4/0x870 [btrfs]
  [66.555718]  ? kvm_sched_clock_read+0x18/0x40
  [66.575758]  open_ctree+0xb32/0x1734 [btrfs]
  [66.595272]  ? bdi_register_va+0x1b/0x20
  [66.614638]  ? super_setup_bdi_name+0x79/0xd0
  [66.633809]  btrfs_mount_root.cold+0x12/0xeb [btrfs]
  [66.652938]  ? __kmalloc_track_caller+0x217/0x3b0
  [66.671925]  legacy_get_tree+0x34/0x60
  [66.690300]  vfs_get_tree+0x2d/0xc0
  [66.708221]  vfs_kern_mount.part.0+0x78/0xc0
  [66.725808]  vfs_kern_mount+0x13/0x20
  [66.742730]  btrfs_mount+0x11f/0x3c0 [btrfs]
  [66.759350]  ? kfree+0x5ff/0x670
  [66.775441]  ? __kmalloc_track_caller+0x217/0x3b0
  [66.791750]  legacy_get_tree+0x34/0x60
  [66.807494]  vfs_get_tree+0x2d/0xc0
  [66.823349]  path_mount+0x48c/0xd30
  [66.838753]  __x64_sys_mount+0x108/0x140
  [66.854412]  do_syscall_64+0x38/0x50
  [66.869673]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
  [66.885093] RIP: 0033:0x7f0138827f6e
  [66.945613] RSP: 002b:00007ffecd79edf8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
  [66.977214] RAX: ffffffffffffffda RBX: 00007f013894c264 RCX: 00007f0138827f6e
  [66.994266] RDX: 00005593a4a41360 RSI: 00005593a4a33690 RDI: 00005593a4a3a6c0
  [67.011544] RBP: 00005593a4a33440 R08: 0000000000000000 R09: 0000000000000001
  [67.028836] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
  [67.045812] R13: 00005593a4a3a6c0 R14: 00005593a4a41360 R15: 00005593a4a33440
  [67.216138] ---[ end trace e114b111db64298c ]---
  [67.237089] RIP: 0010:extent_io_tree_panic.isra.0+0x23/0x25 [btrfs]
  [67.325317] RSP: 0018:ffff93e5414c3948 EFLAGS: 00010246
  [67.347946] RAX: 0000000000000000 RBX: 0000000001bfffff RCX: 0000000000000000
  [67.371343] RDX: 0000000000000000 RSI: ffffffffb90d4660 RDI: 00000000ffffffff
  [67.394757] RBP: ffff93e5414c3948 R08: 0000000000000001 R09: 0000000000000001
  [67.418409] R10: ffff93e5414c3658 R11: 0000000000000000 R12: ffff8ec782d728c0
  [67.441906] R13: ffff8ec78bc71628 R14: ffff8ec782d72aa0 R15: 0000000002400000
  [67.465436] FS:  00007f01386a8580(0000) GS:ffff8ec809000000(0000) knlGS:0000000000000000
  [67.511660] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [67.535047] CR2: 00007f01382fa000 CR3: 0000000109a34000 CR4: 0000000000750ee0
  [67.558449] PKRU: 55555554
  [67.581146] note: mount[613] exited with preempt_count 2

The image has a chunk item which has a logical start 37748736 and length
18446744073701163008 (-8M). The calculated end 29360127 overflows.
EEXIST was caught by insert_state() because of the duplicate end and
extent_io_tree_panic() was called.

Add overflow check of chunk item end to tree checker so it can be
detected early at mount time.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=208929
CC: [email protected] # 4.19+
Reviewed-by: Anand Jain <[email protected]>
Signed-off-by: Su Yue <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
dabrace pushed a commit that referenced this pull request Apr 16, 2021
xdp_return_frame() may be called outside of NAPI context to return
xdpf back to page_pool. xdp_return_frame() calls __xdp_return() with
napi_direct = false. For page_pool memory model, __xdp_return() calls
xdp_return_frame_no_direct() unconditionally and below false negative
kernel BUG throw happened under preempt-rt build:

[  430.450355] BUG: using smp_processor_id() in preemptible [00000000] code: modprobe/3884
[  430.451678] caller is __xdp_return+0x1ff/0x2e0
[  430.452111] CPU: 0 PID: 3884 Comm: modprobe Tainted: G     U      E     5.12.0-rc2+ #45

Changes in v2:
 - This patch fixes the issue by making xdp_return_frame_no_direct() is
   only called if napi_direct = true, as recommended for better by
   Jesper Dangaard Brouer. Thanks!

Fixes: 2539650 ("xdp: Helpers for disabling napi_direct of xdp_return_frame")
Signed-off-by: Ong Boon Leong <[email protected]>
Acked-by: Jesper Dangaard Brouer <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
dabrace pushed a commit that referenced this pull request May 6, 2021
Ritesh reported a bug [1] against UML, noting that it crashed on
startup. The backtrace shows the following (heavily redacted):

(gdb) bt
...
 #26 0x0000000060015b5d in sem_init () at ipc/sem.c:268
 #27 0x00007f89906d92f7 in ?? () from /lib/x86_64-linux-gnu/libcom_err.so.2
 #28 0x00007f8990ab8fb2 in call_init (...) at dl-init.c:72
...
 #40 0x00007f89909bf3a6 in nss_load_library (...) at nsswitch.c:359
...
 #44 0x00007f8990895e35 in _nss_compat_getgrnam_r (...) at nss_compat/compat-grp.c:486
 #45 0x00007f8990968b85 in __getgrnam_r [...]
 #46 0x00007f89909d6b77 in grantpt [...]
 #47 0x00007f8990a9394e in __GI_openpty [...]
 #48 0x00000000604a1f65 in openpty_cb (...) at arch/um/os-Linux/sigio.c:407
 #49 0x00000000604a58d0 in start_idle_thread (...) at arch/um/os-Linux/skas/process.c:598
 #50 0x0000000060004a3d in start_uml () at arch/um/kernel/skas/process.c:45
 #51 0x00000000600047b2 in linux_main (...) at arch/um/kernel/um_arch.c:334
 #52 0x000000006000574f in main (...) at arch/um/os-Linux/main.c:144

indicating that the UML function openpty_cb() calls openpty(),
which internally calls __getgrnam_r(), which causes the nsswitch
machinery to get started.

This loads, through lots of indirection that I snipped, the
libcom_err.so.2 library, which (in an unknown function, "??")
calls sem_init().

Now, of course it wants to get libpthread's sem_init(), since
it's linked against libpthread. However, the dynamic linker
looks up that symbol against the binary first, and gets the
kernel's sem_init().

Hajime Tazaki noted that "objcopy -L" can localize a symbol,
so the dynamic linker wouldn't do the lookup this way. I tried,
but for some reason that didn't seem to work.

Doing the same thing in the linker script instead does seem to
work, though I cannot entirely explain - it *also* works if I
just add "VERSION { { global: *; }; }" instead, indicating that
something else is happening that I don't really understand. It
may be that explicitly doing that marks them with some kind of
empty version, and that's different from the default.

Explicitly marking them with a version breaks kallsyms, so that
doesn't seem to be possible.

Marking all the symbols as local seems correct, and does seem
to address the issue, so do that. Also do it for static link,
nsswitch libraries could still be loaded there.

[1] https://bugs.debian.org/983379

Reported-by: Ritesh Raj Sarraf <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Acked-By: Anton Ivanov <[email protected]>
Tested-By: Ritesh Raj Sarraf <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

Successfully merging this pull request may close these issues.