Update am335x-bonegreen-wireless.dts #71
Closed
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
… is defined
'owner' member of 'struct mutex' is defined as below
in 'include/linux/mutex.h':
struct mutex {
...
if defined(CONFIG_DEBUG_MUTEXES) || defined(CONFIG_MUTEX_SPIN_ON_OWNER)
struct task_struct *owner;
endif
...
But function au_pin_hdir_set_owner() called owner as below:
void au_pin_hdir_set_owner(struct au_pin *p, struct task_struct *task)
{
if defined(CONFIG_DEBUG_MUTEXES) || defined(CONFIG_SMP)
p->hdir->hi_inode->i_mutex.owner = task;
endif
}
So if Kernel doesn't define 'DEBUG_MUTEXES' and 'MUTEX_SPIN_ON_OWNER',
but defines SMP, compiler will report the below error:
fs/aufs/i_op.c: In function 'au_pin_hdir_set_owner':
fs/aufs/i_op.c:593:28: error: 'struct mutex' has no member named 'owner'
p->hdir->hi_inode->i_mutex.owner = task;
^
Signed-off-by: Yanjiang Jin <[email protected]>
Signed-off-by: Bruce Ashfield <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
This reverts commit 8a4ebc7. Signed-off-by: Robert Nelson <[email protected]>
This reverts commit e70aade. Signed-off-by: Robert Nelson <[email protected]>
…onsoles" This reverts commit bc24ac1. Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
This reverts commit 956b200.
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
<zmatt> rcn-ee: btw, I got a small patch that makes 4.1-ti compile in thumb mode again, you want it? (this means TI still compiles in ARM mode? why oh why?) <zmatt> http://pastebin.com/3S3sy8U4 Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
PRU IRAM addresses need to be masked before being handled to remoteproc. This is due to PRU Binutils' lack of separate address spaces for IRAM and DRAM. Signed-off-by: Dimitar Dimitrov <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
This patch introduces regmap_get_max_register() function which would be used by the infrastructures like nvmem framework built on top of regmap. Signed-off-by: Srinivas Kandagatla <[email protected]> Signed-off-by: Mark Brown <[email protected]>
This patch introduces regmap_get_reg_stride() function which would be used by the infrastructures like nvmem framework built on top of regmap. Mostly this function would be used for sanity checks on inputs within such infrastructure. Signed-off-by: Srinivas Kandagatla <[email protected]> Signed-off-by: Mark Brown <[email protected]>
The beaglebone family of boards contain two I2C busses enabled. The first one with a baseboard identification EEPROM and a cape I2C bus. Signed-off-by: Pantelis Antoniou <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
Mark (and unmark) device nodes with the POPULATE flag as appropriate. This is required to avoid multi probing when using I2C and device overlays containing a mux. This patch is also more careful with the release of the adapter device which caused a deadlock with muxes, and does not break the build on !OF since the node flag accessors are not defined then. Signed-off-by: Pantelis Antoniou <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
I have encountered the same issue(s) on A6A boards. I couldn't find a patch, so I wrote this patch to update the device tree in the davinci_mdio driver in the 3.15.1 tree, it seems to correct it. I would welcome any input on a different approach. https://groups.google.com/d/msg/beagleboard/9mctrG26Mc8/SRlnumt0LoMJ v4.1-rcX: added hack around CONFIG_OF_OVERLAY v4.2-rc3+: added if (of_machine_is_compatible("ti,am335x-bone")) so we do not break dual ethernet am335x devices Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
…operty) Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
4.1 TI Delta: RobertCNelson/ti-linux-kernel@e33f57a...2893b5f Signed-off-by: Robert Nelson <[email protected]>
distinguish BBG and BBGW
RobertCNelson
added a commit
to RobertCNelson/ti-linux-kernel-dev
that referenced
this pull request
Mar 4, 2016
fixes: beagleboard/linux#71 Signed-off-by: Robert Nelson <[email protected]>
RobertCNelson
added a commit
to RobertCNelson/ti-linux-kernel-dev
that referenced
this pull request
Mar 4, 2016
fixes: beagleboard/linux#71 Signed-off-by: Robert Nelson <[email protected]>
RobertCNelson
force-pushed
the
4.1
branch
2 times, most recently
from
ee95312
to
62b5111
Compare
RobertCNelson
force-pushed
the
4.1
branch
2 times, most recently
from
e2164c1
to
cfa9417
Compare
RobertCNelson
force-pushed
the
4.1
branch
2 times, most recently
from
b372c8b
to
85d25c0
Compare
|
Can this be closed now? |
|
Yeap, it's been merged.. |
dlech
pushed a commit
to ev3dev/bb.org-kernel
that referenced
this pull request
Apr 11, 2016
[ Upstream commit ddf1d39 ] An unprivileged user can trigger an oops on a kernel with CONFIG_CHECKPOINT_RESTORE. proc_pid_cmdline_read takes mmap_sem for reading and obtains args + env start/end values. These get sanity checked as follows: BUG_ON(arg_start > arg_end); BUG_ON(env_start > env_end); These can be changed by prctl_set_mm. Turns out also takes the semaphore for reading, effectively rendering it useless. This results in: kernel BUG at fs/proc/base.c:240! invalid opcode: 0000 [beagleboard#1] SMP Modules linked in: virtio_net CPU: 0 PID: 925 Comm: a.out Not tainted 4.4.0-rc8-next-20160105dupa+ beagleboard#71 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff880077a68000 ti: ffff8800784d0000 task.ti: ffff8800784d0000 RIP: proc_pid_cmdline_read+0x520/0x530 RSP: 0018:ffff8800784d3db8 EFLAGS: 00010206 RAX: ffff880077c5b6b0 RBX: ffff8800784d3f18 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 00007f78e8857000 RDI: 0000000000000246 RBP: ffff8800784d3e40 R08: 0000000000000008 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000050 R13: 00007f78e8857800 R14: ffff88006fcef000 R15: ffff880077c5b600 FS: 00007f78e884a740(0000) GS:ffff88007b200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f78e8361770 CR3: 00000000790a5000 CR4: 00000000000006f0 Call Trace: __vfs_read+0x37/0x100 vfs_read+0x82/0x130 SyS_read+0x58/0xd0 entry_SYSCALL_64_fastpath+0x12/0x76 Code: 4c 8b 7d a8 eb e9 48 8b 9d 78 ff ff ff 4c 8b 7d 90 48 8b 03 48 39 45 a8 0f 87 f0 fe ff ff e9 d1 fe ff ff 4c 8b 7d 90 eb c6 0f 0b <0f> 0b 0f 0b 66 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 RIP proc_pid_cmdline_read+0x520/0x530 ---[ end trace 97882617ae9c6818 ]--- Turns out there are instances where the code just reads aformentioned values without locking whatsoever - namely environ_read and get_cmdline. Interestingly these functions look quite resilient against bogus values, but I don't believe this should be relied upon. The first patch gets rid of the oops bug by grabbing mmap_sem for writing. The second patch is optional and puts locking around aformentioned consumers for safety. Consumers of other fields don't seem to benefit from similar treatment and are left untouched. This patch (of 2): The code was taking the semaphore for reading, which does not protect against readers nor concurrent modifications. The problem could cause a sanity checks to fail in procfs's cmdline reader, resulting in an OOPS. Note that some functions perform an unlocked read of various mm fields, but they seem to be fine despite possible modificaton. Signed-off-by: Mateusz Guzik <[email protected]> Acked-by: Cyrill Gorcunov <[email protected]> Cc: Alexey Dobriyan <[email protected]> Cc: Jarod Wilson <[email protected]> Cc: Jan Stancek <[email protected]> Cc: Al Viro <[email protected]> Cc: Anshuman Khandual <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
RobertCNelson
pushed a commit
that referenced
this pull request
Jan 12, 2017
commit 1c7de2b upstream. There is at least one Chelsio 10Gb card which uses VPD area to store some non-standard blocks (example below). However pci_vpd_size() returns the length of the first block only assuming that there can be only one VPD "End Tag". Since 4e1a635 ("vfio/pci: Use kernel VPD access functions"), VFIO blocks access beyond that offset, which prevents the guest "cxgb3" driver from probing the device. The host system does not have this problem as its driver accesses the config space directly without pci_read_vpd(). Add a quirk to override the VPD size to a bigger value. The maximum size is taken from EEPROMSIZE in drivers/net/ethernet/chelsio/cxgb3/common.h. We do not read the tag as the cxgb3 driver does as the driver supports writing to EEPROM/VPD and when it writes, it only checks for 8192 bytes boundary. The quirk is registered for all devices supported by the cxgb3 driver. This adds a quirk to the PCI layer (not to the cxgb3 driver) as the cxgb3 driver itself accesses VPD directly and the problem only exists with the vfio-pci driver (when cxgb3 is not running on the host and may not be even loaded) which blocks accesses beyond the first block of VPD data. However vfio-pci itself does not have quirks mechanism so we add it to PCI. This is the controller: Ethernet controller [0200]: Chelsio Communications Inc T310 10GbE Single Port Adapter [1425:0030] This is what I parsed from its VPD: === b'\x82*\x0010 Gigabit Ethernet-SR PCI Express Adapter\x90J\x00EC\x07D76809 FN\x0746K' 0000 Large item 42 bytes; name 0x2 Identifier String b'10 Gigabit Ethernet-SR PCI Express Adapter' 002d Large item 74 bytes; name 0x10 #00 [EC] len=7: b'D76809 ' #0a [FN] len=7: b'46K7897' #14 [PN] len=7: b'46K7897' #1e [MN] len=4: b'1037' #25 [FC] len=4: b'5769' #2c [SN] len=12: b'YL102035603V' #3b [NA] len=12: b'00145E992ED1' 007a Small item 1 bytes; name 0xf End Tag 0c00 Large item 16 bytes; name 0x2 Identifier String b'S310E-SR-X ' 0c13 Large item 234 bytes; name 0x10 #00 [PN] len=16: b'TBD ' #13 [EC] len=16: b'110107730D2 ' #26 [SN] len=16: b'97YL102035603V ' #39 [NA] len=12: b'00145E992ED1' #48 [V0] len=6: b'175000' #51 [V1] len=6: b'266666' #5a [V2] len=6: b'266666' #63 [V3] len=6: b'2000 ' #6c [V4] len=2: b'1 ' #71 [V5] len=6: b'c2 ' #7a [V6] len=6: b'0 ' #83 [V7] len=2: b'1 ' #88 [V8] len=2: b'0 ' #8d [V9] len=2: b'0 ' #92 [VA] len=2: b'0 ' #97 [RV] len=80: b's\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'... 0d00 Large item 252 bytes; name 0x11 #00 [VC] len=16: b'122310_1222 dp ' #13 [VD] len=16: b'610-0001-00 H1\x00\x00' #26 [VE] len=16: b'122310_1353 fp ' #39 [VF] len=16: b'610-0001-00 H1\x00\x00' #4c [RW] len=173: b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'... 0dff Small item 0 bytes; name 0xf End Tag 10f3 Large item 13315 bytes; name 0x62 !!! unknown item name 98: b'\xd0\x03\x00@`\x0c\x08\x00\x00\x00\x00\x00\x00\x00\x00\x00' === Signed-off-by: Alexey Kardashevskiy <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
distinguish BBG and BBGW