Current G_MULTI_* config not working for windows #48
Comments
|
Sure we can do that, in essence we'd be reverting to how we did it in 3.8, which we know works.. |
|
Is there a reason why this was changed? I like the way how it used to work: Connect the beaglebone the first time, install the drivers from the USB mass storage and then open 192.168.7.2 in the browser... |
|
Well, it looks like it was changed back in the v3.14.x-ti era and nobody complained. Even thou we'd been shipping a v3.14.x testing snapshot for a good year. So yeah, we are getting a much larger group of testers on v4.1.x then we ever did on v3.14.x.. |
RobertCNelson
added a commit
to RobertCNelson/ti-linux-kernel-dev
that referenced
this issue
Oct 26, 2015
fixes: beagleboard/linux#48 Signed-off-by: Robert Nelson <[email protected]>
RobertCNelson
added a commit
to RobertCNelson/ti-linux-kernel-dev
that referenced
this issue
Oct 26, 2015
fixes: beagleboard/linux#48 Signed-off-by: Robert Nelson <[email protected]>
RobertCNelson
added a commit
to RobertCNelson/ti-linux-kernel-dev
that referenced
this issue
Oct 26, 2015
fixes: beagleboard/linux#48 Signed-off-by: Robert Nelson <[email protected]>
RobertCNelson
added a commit
to RobertCNelson/ti-linux-kernel-dev
that referenced
this issue
Oct 26, 2015
fixes: beagleboard/linux#48 Signed-off-by: Robert Nelson <[email protected]>
RobertCNelson
added a commit
to RobertCNelson/ti-linux-kernel-dev
that referenced
this issue
Oct 26, 2015
fixes: beagleboard/linux#48 Signed-off-by: Robert Nelson <[email protected]>
thess
pushed a commit
to thess/ti-linux-kernel-dev
that referenced
this issue
Oct 27, 2015
fixes: beagleboard/linux#48 Signed-off-by: Robert Nelson <[email protected]>
RobertCNelson
pushed a commit
that referenced
this issue
Feb 23, 2016
commit a38a08d upstream. This driver registers for extcon events as part of its probe, but never unregisters them in case of error in the probe path. There were multiple issues noticed due to this missing error handling. One of them is random crashes if the regulators are not ready yet by the time probe is invoked. Ivan's previous attempt [1] to fix this issue, did not really address all the failure cases like regualtor/get_irq failures. [1] https://lkml.org/lkml/2015/9/7/62 Without this patch the kernel would carsh with log: ... Unable to handle kernel paging request at virtual address 17d78410 pgd = ffffffc001a5c000 [17d78410] *pgd=00000000b6806003, *pud=00000000b6806003, *pmd=0000000000000000 Internal error: Oops: 96000005 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 6 Comm: kworker/u8:0 Not tainted 4.4.0+ #48 Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) Workqueue: deferwq deferred_probe_work_func task: ffffffc03686e900 ti: ffffffc0368b0000 task.ti: ffffffc0368b0000 PC is at raw_notifier_chain_register+0x1c/0x44 LR is at extcon_register_notifier+0x88/0xc8 pc : [<ffffffc0000da43c>] lr : [<ffffffc000606298>] pstate: 80000085 sp : ffffffc0368b3a70 x29: ffffffc0368b3a70 x28: ffffffc03680c310 x27: ffffffc035518000 x26: ffffffc035518000 x25: ffffffc03bfa20e0 x24: ffffffc035580a18 x23: 0000000000000000 x22: ffffffc035518458 x21: ffffffc0355e9a60 x20: ffffffc035518000 x19: 0000000000000000 x18: 0000000000000028 x17: 0000000000000003 x16: ffffffc0018153c8 x15: 0000000000000001 x14: ffffffc03686f0f8 x13: ffffffc03686f0f8 x12: 0000000000000003 x11: 0000000000000001 x10: 0000000000000001 x9 : ffffffc03686f0f8 x8 : 0000e3872014c1a1 x7 : 0000000000000028 x6 : 0000000000000000 x5 : 0000000000000001 x4 : 0000000000000000 x3 : 00000000354fb170 x2 : 0000000017d78400 x1 : ffffffc0355e9a60 x0 : ffffffc0354fb268 Fixes: 591fc11 ("usb: phy: msm: Use extcon framework for VBUS and ID detection") Signed-off-by: Srinivas Kandagatla <[email protected]> Signed-off-by: Felipe Balbi <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
RobertCNelson
pushed a commit
that referenced
this issue
Feb 25, 2016
[ Upstream commit 12e2696 ] I get the splat below when modprobing/rmmoding EDAC drivers. It happens because bus->name is invalid after bus_unregister() has run. The Code: section below corresponds to: .loc 1 1108 0 movq 672(%rbx), %rax # mci_1(D)->bus, mci_1(D)->bus .loc 1 1109 0 popq %rbx # .loc 1 1108 0 movq (%rax), %rdi # _7->name, jmp kfree # and %rax has some funky stuff 2030203020312030 which looks a lot like something walked over it. Fix that by saving the name ptr before doing stuff to string it points to. general protection fault: 0000 [#1] SMP Modules linked in: ... CPU: 4 PID: 10318 Comm: modprobe Tainted: G I EN 3.12.51-11-default+ #48 Hardware name: HP ProLiant DL380 G7, BIOS P67 05/05/2011 task: ffff880311320280 ti: ffff88030da3e000 task.ti: ffff88030da3e000 RIP: 0010:[<ffffffffa019da92>] [<ffffffffa019da92>] edac_unregister_sysfs+0x22/0x30 [edac_core] RSP: 0018:ffff88030da3fe28 EFLAGS: 00010292 RAX: 2030203020312030 RBX: ffff880311b4e000 RCX: 000000000000095c RDX: 0000000000000001 RSI: ffff880327bb9600 RDI: 0000000000000286 RBP: ffff880311b4e750 R08: 0000000000000000 R09: ffffffff81296110 R10: 0000000000000400 R11: 0000000000000000 R12: ffff88030ba1ac68 R13: 0000000000000001 R14: 00000000011b02f0 R15: 0000000000000000 FS: 00007fc9bf8f5700(0000) GS:ffff8801a7c40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000403c90 CR3: 000000019ebdf000 CR4: 00000000000007e0 Stack: Call Trace: i7core_unregister_mci.isra.9 i7core_remove pci_device_remove __device_release_driver driver_detach bus_remove_driver pci_unregister_driver i7core_exit SyS_delete_module system_call_fastpath 0x7fc9bf426536 Code: 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 53 48 89 fb e8 52 2a 1f e1 48 8b bb a0 02 00 00 e8 46 59 1f e1 48 8b 83 a0 02 00 00 5b <48> 8b 38 e9 26 9a fe e0 66 0f 1f 44 00 00 66 66 66 66 90 48 8b RIP [<ffffffffa019da92>] edac_unregister_sysfs+0x22/0x30 [edac_core] RSP <ffff88030da3fe28> Signed-off-by: Borislav Petkov <[email protected]> Cc: Mauro Carvalho Chehab <[email protected]> Cc: <[email protected]> # v3.6.. Fixes: 7a623c0 ("edac: rewrite the sysfs code to use struct device") Signed-off-by: Sasha Levin <[email protected]>
RobertCNelson
pushed a commit
that referenced
this issue
Mar 9, 2016
commit 12e2696 upstream. I get the splat below when modprobing/rmmoding EDAC drivers. It happens because bus->name is invalid after bus_unregister() has run. The Code: section below corresponds to: .loc 1 1108 0 movq 672(%rbx), %rax # mci_1(D)->bus, mci_1(D)->bus .loc 1 1109 0 popq %rbx # .loc 1 1108 0 movq (%rax), %rdi # _7->name, jmp kfree # and %rax has some funky stuff 2030203020312030 which looks a lot like something walked over it. Fix that by saving the name ptr before doing stuff to string it points to. general protection fault: 0000 [#1] SMP Modules linked in: ... CPU: 4 PID: 10318 Comm: modprobe Tainted: G I EN 3.12.51-11-default+ #48 Hardware name: HP ProLiant DL380 G7, BIOS P67 05/05/2011 task: ffff880311320280 ti: ffff88030da3e000 task.ti: ffff88030da3e000 RIP: 0010:[<ffffffffa019da92>] [<ffffffffa019da92>] edac_unregister_sysfs+0x22/0x30 [edac_core] RSP: 0018:ffff88030da3fe28 EFLAGS: 00010292 RAX: 2030203020312030 RBX: ffff880311b4e000 RCX: 000000000000095c RDX: 0000000000000001 RSI: ffff880327bb9600 RDI: 0000000000000286 RBP: ffff880311b4e750 R08: 0000000000000000 R09: ffffffff81296110 R10: 0000000000000400 R11: 0000000000000000 R12: ffff88030ba1ac68 R13: 0000000000000001 R14: 00000000011b02f0 R15: 0000000000000000 FS: 00007fc9bf8f5700(0000) GS:ffff8801a7c40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000403c90 CR3: 000000019ebdf000 CR4: 00000000000007e0 Stack: Call Trace: i7core_unregister_mci.isra.9 i7core_remove pci_device_remove __device_release_driver driver_detach bus_remove_driver pci_unregister_driver i7core_exit SyS_delete_module system_call_fastpath 0x7fc9bf426536 Code: 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 53 48 89 fb e8 52 2a 1f e1 48 8b bb a0 02 00 00 e8 46 59 1f e1 48 8b 83 a0 02 00 00 5b <48> 8b 38 e9 26 9a fe e0 66 0f 1f 44 00 00 66 66 66 66 90 48 8b RIP [<ffffffffa019da92>] edac_unregister_sysfs+0x22/0x30 [edac_core] RSP <ffff88030da3fe28> Signed-off-by: Borislav Petkov <[email protected]> Cc: Mauro Carvalho Chehab <[email protected]> Fixes: 7a623c0 ("edac: rewrite the sysfs code to use struct device") Signed-off-by: Greg Kroah-Hartman <[email protected]>
RobertCNelson
pushed a commit
that referenced
this issue
Jun 29, 2016
commit 12e2696 upstream. I get the splat below when modprobing/rmmoding EDAC drivers. It happens because bus->name is invalid after bus_unregister() has run. The Code: section below corresponds to: .loc 1 1108 0 movq 672(%rbx), %rax # mci_1(D)->bus, mci_1(D)->bus .loc 1 1109 0 popq %rbx # .loc 1 1108 0 movq (%rax), %rdi # _7->name, jmp kfree # and %rax has some funky stuff 2030203020312030 which looks a lot like something walked over it. Fix that by saving the name ptr before doing stuff to string it points to. general protection fault: 0000 [#1] SMP Modules linked in: ... CPU: 4 PID: 10318 Comm: modprobe Tainted: G I EN 3.12.51-11-default+ #48 Hardware name: HP ProLiant DL380 G7, BIOS P67 05/05/2011 task: ffff880311320280 ti: ffff88030da3e000 task.ti: ffff88030da3e000 RIP: 0010:[<ffffffffa019da92>] [<ffffffffa019da92>] edac_unregister_sysfs+0x22/0x30 [edac_core] RSP: 0018:ffff88030da3fe28 EFLAGS: 00010292 RAX: 2030203020312030 RBX: ffff880311b4e000 RCX: 000000000000095c RDX: 0000000000000001 RSI: ffff880327bb9600 RDI: 0000000000000286 RBP: ffff880311b4e750 R08: 0000000000000000 R09: ffffffff81296110 R10: 0000000000000400 R11: 0000000000000000 R12: ffff88030ba1ac68 R13: 0000000000000001 R14: 00000000011b02f0 R15: 0000000000000000 FS: 00007fc9bf8f5700(0000) GS:ffff8801a7c40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000403c90 CR3: 000000019ebdf000 CR4: 00000000000007e0 Stack: Call Trace: i7core_unregister_mci.isra.9 i7core_remove pci_device_remove __device_release_driver driver_detach bus_remove_driver pci_unregister_driver i7core_exit SyS_delete_module system_call_fastpath 0x7fc9bf426536 Code: 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 53 48 89 fb e8 52 2a 1f e1 48 8b bb a0 02 00 00 e8 46 59 1f e1 48 8b 83 a0 02 00 00 5b <48> 8b 38 e9 26 9a fe e0 66 0f 1f 44 00 00 66 66 66 66 90 48 8b RIP [<ffffffffa019da92>] edac_unregister_sysfs+0x22/0x30 [edac_core] RSP <ffff88030da3fe28> Signed-off-by: Borislav Petkov <[email protected]> Cc: Mauro Carvalho Chehab <[email protected]> Fixes: 7a623c0 ("edac: rewrite the sysfs code to use struct device") Signed-off-by: Greg Kroah-Hartman <[email protected]>
RobertCNelson
pushed a commit
that referenced
this issue
Jan 12, 2017
commit 1c7de2b upstream. There is at least one Chelsio 10Gb card which uses VPD area to store some non-standard blocks (example below). However pci_vpd_size() returns the length of the first block only assuming that there can be only one VPD "End Tag". Since 4e1a635 ("vfio/pci: Use kernel VPD access functions"), VFIO blocks access beyond that offset, which prevents the guest "cxgb3" driver from probing the device. The host system does not have this problem as its driver accesses the config space directly without pci_read_vpd(). Add a quirk to override the VPD size to a bigger value. The maximum size is taken from EEPROMSIZE in drivers/net/ethernet/chelsio/cxgb3/common.h. We do not read the tag as the cxgb3 driver does as the driver supports writing to EEPROM/VPD and when it writes, it only checks for 8192 bytes boundary. The quirk is registered for all devices supported by the cxgb3 driver. This adds a quirk to the PCI layer (not to the cxgb3 driver) as the cxgb3 driver itself accesses VPD directly and the problem only exists with the vfio-pci driver (when cxgb3 is not running on the host and may not be even loaded) which blocks accesses beyond the first block of VPD data. However vfio-pci itself does not have quirks mechanism so we add it to PCI. This is the controller: Ethernet controller [0200]: Chelsio Communications Inc T310 10GbE Single Port Adapter [1425:0030] This is what I parsed from its VPD: === b'\x82*\x0010 Gigabit Ethernet-SR PCI Express Adapter\x90J\x00EC\x07D76809 FN\x0746K' 0000 Large item 42 bytes; name 0x2 Identifier String b'10 Gigabit Ethernet-SR PCI Express Adapter' 002d Large item 74 bytes; name 0x10 #00 [EC] len=7: b'D76809 ' #0a [FN] len=7: b'46K7897' #14 [PN] len=7: b'46K7897' #1e [MN] len=4: b'1037' #25 [FC] len=4: b'5769' #2c [SN] len=12: b'YL102035603V' #3b [NA] len=12: b'00145E992ED1' 007a Small item 1 bytes; name 0xf End Tag 0c00 Large item 16 bytes; name 0x2 Identifier String b'S310E-SR-X ' 0c13 Large item 234 bytes; name 0x10 #00 [PN] len=16: b'TBD ' #13 [EC] len=16: b'110107730D2 ' #26 [SN] len=16: b'97YL102035603V ' #39 [NA] len=12: b'00145E992ED1' #48 [V0] len=6: b'175000' #51 [V1] len=6: b'266666' #5a [V2] len=6: b'266666' #63 [V3] len=6: b'2000 ' #6c [V4] len=2: b'1 ' #71 [V5] len=6: b'c2 ' #7a [V6] len=6: b'0 ' #83 [V7] len=2: b'1 ' #88 [V8] len=2: b'0 ' #8d [V9] len=2: b'0 ' #92 [VA] len=2: b'0 ' #97 [RV] len=80: b's\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'... 0d00 Large item 252 bytes; name 0x11 #00 [VC] len=16: b'122310_1222 dp ' #13 [VD] len=16: b'610-0001-00 H1\x00\x00' #26 [VE] len=16: b'122310_1353 fp ' #39 [VF] len=16: b'610-0001-00 H1\x00\x00' #4c [RW] len=173: b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'... 0dff Small item 0 bytes; name 0xf End Tag 10f3 Large item 13315 bytes; name 0x62 !!! unknown item name 98: b'\xd0\x03\x00@`\x0c\x08\x00\x00\x00\x00\x00\x00\x00\x00\x00' === Signed-off-by: Alexey Kardashevskiy <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
RobertCNelson
pushed a commit
that referenced
this issue
May 15, 2017
[ Upstream commit ddc665a ] When the instruction right before the branch destination is a 64 bit load immediate, we currently calculate the wrong jump offset in the ctx->offset[] array as we only account one instruction slot for the 64 bit load immediate although it uses two BPF instructions. Fix it up by setting the offset into the right slot after we incremented the index. Before (ldimm64 test 1): [...] 00000020: 52800007 mov w7, #0x0 // #0 00000024: d2800060 mov x0, #0x3 // #3 00000028: d2800041 mov x1, #0x2 // #2 0000002c: eb01001f cmp x0, x1 00000030: 54ffff82 b.cs 0x00000020 00000034: d29fffe7 mov x7, #0xffff // #65535 00000038: f2bfffe7 movk x7, #0xffff, lsl #16 0000003c: f2dfffe7 movk x7, #0xffff, lsl #32 00000040: f2ffffe7 movk x7, #0xffff, lsl #48 00000044: d29dddc7 mov x7, #0xeeee // #61166 00000048: f2bdddc7 movk x7, #0xeeee, lsl #16 0000004c: f2ddddc7 movk x7, #0xeeee, lsl #32 00000050: f2fdddc7 movk x7, #0xeeee, lsl #48 [...] After (ldimm64 test 1): [...] 00000020: 52800007 mov w7, #0x0 // #0 00000024: d2800060 mov x0, #0x3 // #3 00000028: d2800041 mov x1, #0x2 // #2 0000002c: eb01001f cmp x0, x1 00000030: 540000a2 b.cs 0x00000044 00000034: d29fffe7 mov x7, #0xffff // #65535 00000038: f2bfffe7 movk x7, #0xffff, lsl #16 0000003c: f2dfffe7 movk x7, #0xffff, lsl #32 00000040: f2ffffe7 movk x7, #0xffff, lsl #48 00000044: d29dddc7 mov x7, #0xeeee // #61166 00000048: f2bdddc7 movk x7, #0xeeee, lsl #16 0000004c: f2ddddc7 movk x7, #0xeeee, lsl #32 00000050: f2fdddc7 movk x7, #0xeeee, lsl #48 [...] Also, add a couple of test cases to make sure JITs pass this test. Tested on Cavium ThunderX ARMv8. The added test cases all pass after the fix. Fixes: 8eee539 ("arm64: bpf: fix out-of-bounds read in bpf2a64_offset()") Reported-by: David S. Miller <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Alexei Starovoitov <[email protected]> Cc: Xi Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
RobertCNelson
pushed a commit
that referenced
this issue
May 25, 2017
[ Upstream commit ddc665a ] When the instruction right before the branch destination is a 64 bit load immediate, we currently calculate the wrong jump offset in the ctx->offset[] array as we only account one instruction slot for the 64 bit load immediate although it uses two BPF instructions. Fix it up by setting the offset into the right slot after we incremented the index. Before (ldimm64 test 1): [...] 00000020: 52800007 mov w7, #0x0 // #0 00000024: d2800060 mov x0, #0x3 // #3 00000028: d2800041 mov x1, #0x2 // #2 0000002c: eb01001f cmp x0, x1 00000030: 54ffff82 b.cs 0x00000020 00000034: d29fffe7 mov x7, #0xffff // #65535 00000038: f2bfffe7 movk x7, #0xffff, lsl #16 0000003c: f2dfffe7 movk x7, #0xffff, lsl #32 00000040: f2ffffe7 movk x7, #0xffff, lsl #48 00000044: d29dddc7 mov x7, #0xeeee // #61166 00000048: f2bdddc7 movk x7, #0xeeee, lsl #16 0000004c: f2ddddc7 movk x7, #0xeeee, lsl #32 00000050: f2fdddc7 movk x7, #0xeeee, lsl #48 [...] After (ldimm64 test 1): [...] 00000020: 52800007 mov w7, #0x0 // #0 00000024: d2800060 mov x0, #0x3 // #3 00000028: d2800041 mov x1, #0x2 // #2 0000002c: eb01001f cmp x0, x1 00000030: 540000a2 b.cs 0x00000044 00000034: d29fffe7 mov x7, #0xffff // #65535 00000038: f2bfffe7 movk x7, #0xffff, lsl #16 0000003c: f2dfffe7 movk x7, #0xffff, lsl #32 00000040: f2ffffe7 movk x7, #0xffff, lsl #48 00000044: d29dddc7 mov x7, #0xeeee // #61166 00000048: f2bdddc7 movk x7, #0xeeee, lsl #16 0000004c: f2ddddc7 movk x7, #0xeeee, lsl #32 00000050: f2fdddc7 movk x7, #0xeeee, lsl #48 [...] Also, add a couple of test cases to make sure JITs pass this test. Tested on Cavium ThunderX ARMv8. The added test cases all pass after the fix. Fixes: 8eee539 ("arm64: bpf: fix out-of-bounds read in bpf2a64_offset()") Reported-by: David S. Miller <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Alexei Starovoitov <[email protected]> Cc: Xi Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
RobertCNelson
pushed a commit
that referenced
this issue
Dec 19, 2017
[ Upstream commit 36b6f9f ] Lockdep warns about a potential deadlock: [ 66.782842] ====================================================== [ 66.782888] WARNING: possible circular locking dependency detected [ 66.782937] 4.14.0-rc2-test-test+ #48 Not tainted [ 66.782983] ------------------------------------------------------ [ 66.783052] umount/336 is trying to acquire lock: [ 66.783117] (cpu_hotplug_lock.rw_sem){++++}, at: [<ffffffff81032395>] rdt_kill_sb+0x215/0x390 [ 66.783193] but task is already holding lock: [ 66.783244] (rdtgroup_mutex){+.+.}, at: [<ffffffff810321b6>] rdt_kill_sb+0x36/0x390 [ 66.783305] which lock already depends on the new lock. [ 66.783364] the existing dependency chain (in reverse order) is: [ 66.783419] -> #3 (rdtgroup_mutex){+.+.}: [ 66.783467] __lock_acquire+0x1293/0x13f0 [ 66.783509] lock_acquire+0xaf/0x220 [ 66.783543] __mutex_lock+0x71/0x9b0 [ 66.783575] mutex_lock_nested+0x1b/0x20 [ 66.783610] intel_rdt_online_cpu+0x3b/0x430 [ 66.783649] cpuhp_invoke_callback+0xab/0x8e0 [ 66.783687] cpuhp_thread_fun+0x7a/0x150 [ 66.783722] smpboot_thread_fn+0x1cc/0x270 [ 66.783764] kthread+0x16e/0x190 [ 66.783794] ret_from_fork+0x27/0x40 [ 66.783825] -> #2 (cpuhp_state){+.+.}: [ 66.783870] __lock_acquire+0x1293/0x13f0 [ 66.783906] lock_acquire+0xaf/0x220 [ 66.783938] cpuhp_issue_call+0x102/0x170 [ 66.783974] __cpuhp_setup_state_cpuslocked+0x154/0x2a0 [ 66.784023] __cpuhp_setup_state+0xc7/0x170 [ 66.784061] page_writeback_init+0x43/0x67 [ 66.784097] pagecache_init+0x43/0x4a [ 66.784131] start_kernel+0x3ad/0x3f7 [ 66.784165] x86_64_start_reservations+0x2a/0x2c [ 66.784204] x86_64_start_kernel+0x72/0x75 [ 66.784241] verify_cpu+0x0/0xfb [ 66.784270] -> #1 (cpuhp_state_mutex){+.+.}: [ 66.784319] __lock_acquire+0x1293/0x13f0 [ 66.784355] lock_acquire+0xaf/0x220 [ 66.784387] __mutex_lock+0x71/0x9b0 [ 66.784419] mutex_lock_nested+0x1b/0x20 [ 66.784454] __cpuhp_setup_state_cpuslocked+0x52/0x2a0 [ 66.784497] __cpuhp_setup_state+0xc7/0x170 [ 66.784535] page_alloc_init+0x28/0x30 [ 66.784569] start_kernel+0x148/0x3f7 [ 66.784602] x86_64_start_reservations+0x2a/0x2c [ 66.784642] x86_64_start_kernel+0x72/0x75 [ 66.784678] verify_cpu+0x0/0xfb [ 66.784707] -> #0 (cpu_hotplug_lock.rw_sem){++++}: [ 66.784759] check_prev_add+0x32f/0x6e0 [ 66.784794] __lock_acquire+0x1293/0x13f0 [ 66.784830] lock_acquire+0xaf/0x220 [ 66.784863] cpus_read_lock+0x3d/0xb0 [ 66.784896] rdt_kill_sb+0x215/0x390 [ 66.784930] deactivate_locked_super+0x3e/0x70 [ 66.784968] deactivate_super+0x40/0x60 [ 66.785003] cleanup_mnt+0x3f/0x80 [ 66.785034] __cleanup_mnt+0x12/0x20 [ 66.785070] task_work_run+0x8b/0xc0 [ 66.785103] exit_to_usermode_loop+0x94/0xa0 [ 66.786804] syscall_return_slowpath+0xe8/0x150 [ 66.788502] entry_SYSCALL_64_fastpath+0xab/0xad [ 66.790194] other info that might help us debug this: [ 66.795139] Chain exists of: cpu_hotplug_lock.rw_sem --> cpuhp_state --> rdtgroup_mutex [ 66.800035] Possible unsafe locking scenario: [ 66.803267] CPU0 CPU1 [ 66.804867] ---- ---- [ 66.806443] lock(rdtgroup_mutex); [ 66.808002] lock(cpuhp_state); [ 66.809565] lock(rdtgroup_mutex); [ 66.811110] lock(cpu_hotplug_lock.rw_sem); [ 66.812608] *** DEADLOCK *** [ 66.816983] 2 locks held by umount/336: [ 66.818418] #0: (&type->s_umount_key#35){+.+.}, at: [<ffffffff81229738>] deactivate_super+0x38/0x60 [ 66.819922] #1: (rdtgroup_mutex){+.+.}, at: [<ffffffff810321b6>] rdt_kill_sb+0x36/0x390 When the resctrl filesystem is unmounted the locks should be obtain in the locks in the same order as was done when the cpus came online: cpu_hotplug_lock before rdtgroup_mutex. This also requires to switch the static_branch_disable() calls to the _cpulocked variant because now cpu hotplug lock is held already. [ tglx: Switched to cpus_read_[un]lock ] Signed-off-by: Reinette Chatre <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Sai Praneeth Prakhya <[email protected]> Acked-by: Vikas Shivappa <[email protected]> Acked-by: Fenghua Yu <[email protected]> Acked-by: Tony Luck <[email protected]> Link: https://lkml.kernel.org/r/cc292e76be073f7260604651711c47b09fd0dc81.1508490116.git.reinette.chatre@intel.com Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
RobertCNelson
pushed a commit
that referenced
this issue
Sep 13, 2018
[ Upstream commit 92a4728 ] Dirk Gouders reported that two consecutive "make" invocations on an already compiled tree will show alternating behaviors: $ make CALL scripts/checksyscalls.sh DESCEND objtool CHK include/generated/compile.h DATAREL arch/x86/boot/compressed/vmlinux Kernel: arch/x86/boot/bzImage is ready (#48) Building modules, stage 2. MODPOST 165 modules $ make CALL scripts/checksyscalls.sh DESCEND objtool CHK include/generated/compile.h LD arch/x86/boot/compressed/vmlinux ZOFFSET arch/x86/boot/zoffset.h AS arch/x86/boot/header.o LD arch/x86/boot/setup.elf OBJCOPY arch/x86/boot/setup.bin OBJCOPY arch/x86/boot/vmlinux.bin BUILD arch/x86/boot/bzImage Setup is 15644 bytes (padded to 15872 bytes). System is 6663 kB CRC 3eb90f40 Kernel: arch/x86/boot/bzImage is ready (#48) Building modules, stage 2. MODPOST 165 modules He bisected it back to: commit 98f7852 ("x86/boot: Refuse to build with data relocations") The root cause was the use of the "if_changed" kbuild function multiple times for the same target. It was designed to only be used once per target, otherwise it will effectively always trigger, flipping back and forth between the two commands getting recorded by "if_changed". Instead, this patch merges the two commands into a single function to get stable build artifacts (i.e. .vmlinux.cmd), and a single build behavior. Bisected-and-Reported-by: Dirk Gouders <[email protected]> Fix-Suggested-by: Masahiro Yamada <[email protected]> Signed-off-by: Kees Cook <[email protected]> Reviewed-by: Masahiro Yamada <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/20180724230827.GA37823@beast Signed-off-by: Ingo Molnar <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
RobertCNelson
pushed a commit
that referenced
this issue
Oct 22, 2018
[ Upstream commit 92a4728 ] Dirk Gouders reported that two consecutive "make" invocations on an already compiled tree will show alternating behaviors: $ make CALL scripts/checksyscalls.sh DESCEND objtool CHK include/generated/compile.h DATAREL arch/x86/boot/compressed/vmlinux Kernel: arch/x86/boot/bzImage is ready (#48) Building modules, stage 2. MODPOST 165 modules $ make CALL scripts/checksyscalls.sh DESCEND objtool CHK include/generated/compile.h LD arch/x86/boot/compressed/vmlinux ZOFFSET arch/x86/boot/zoffset.h AS arch/x86/boot/header.o LD arch/x86/boot/setup.elf OBJCOPY arch/x86/boot/setup.bin OBJCOPY arch/x86/boot/vmlinux.bin BUILD arch/x86/boot/bzImage Setup is 15644 bytes (padded to 15872 bytes). System is 6663 kB CRC 3eb90f40 Kernel: arch/x86/boot/bzImage is ready (#48) Building modules, stage 2. MODPOST 165 modules He bisected it back to: commit 98f7852 ("x86/boot: Refuse to build with data relocations") The root cause was the use of the "if_changed" kbuild function multiple times for the same target. It was designed to only be used once per target, otherwise it will effectively always trigger, flipping back and forth between the two commands getting recorded by "if_changed". Instead, this patch merges the two commands into a single function to get stable build artifacts (i.e. .vmlinux.cmd), and a single build behavior. Bisected-and-Reported-by: Dirk Gouders <[email protected]> Fix-Suggested-by: Masahiro Yamada <[email protected]> Signed-off-by: Kees Cook <[email protected]> Reviewed-by: Masahiro Yamada <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/20180724230827.GA37823@beast Signed-off-by: Ingo Molnar <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
RobertCNelson
added a commit
to RobertCNelson/linux-dev
that referenced
this issue
Nov 27, 2018
fixes: beagleboard/linux#48 Signed-off-by: Robert Nelson <[email protected]>
RobertCNelson
pushed a commit
that referenced
this issue
May 9, 2020
[ Upstream commit dd09fad ] Commit: 3a6b6c6 ("efi: Make EFI_MEMORY_ATTRIBUTES_TABLE initialization common across all architectures") moved the call to efi_memattr_init() from ARM specific to the generic EFI init code, in order to be able to apply the restricted permissions described in that table on x86 as well. We never enabled this feature fully on i386, and so mapping and reserving this table is pointless. However, due to the early call to memblock_reserve(), the memory bookkeeping gets confused to the point where it produces the splat below when we try to map the memory later on: ------------[ cut here ]------------ ioremap on RAM at 0x3f251000 - 0x3fa1afff WARNING: CPU: 0 PID: 0 at arch/x86/mm/ioremap.c:166 __ioremap_caller ... Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.20.0 #48 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 EIP: __ioremap_caller.constprop.0+0x249/0x260 Code: 90 0f b7 05 4e 38 40 de 09 45 e0 e9 09 ff ff ff 90 8d 45 ec c6 05 ... EAX: 00000029 EBX: 00000000 ECX: de59c228 EDX: 00000001 ESI: 3f250fff EDI: 00000000 EBP: de3edf20 ESP: de3edee0 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00200296 CR0: 80050033 CR2: ffd17000 CR3: 1e58c000 CR4: 00040690 Call Trace: ioremap_cache+0xd/0x10 ? old_map_region+0x72/0x9d old_map_region+0x72/0x9d efi_map_region+0x8/0xa efi_enter_virtual_mode+0x260/0x43b start_kernel+0x329/0x3aa i386_start_kernel+0xa7/0xab startup_32_smp+0x164/0x168 ---[ end trace e15ccf6b9f356833 ]--- Let's work around this by disregarding the memory attributes table altogether on i386, which does not result in a loss of functionality or protection, given that we never consumed the contents. Fixes: 3a6b6c6 ("efi: Make EFI_MEMORY_ATTRIBUTES_TABLE ... ") Tested-by: Arvind Sankar <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>
fhgwright
pushed a commit
to fhgwright/bb-linux
that referenced
this issue
Jun 10, 2020
…f fs_info::journal_info commit fcc9973 upstream. [BUG] One run of btrfs/063 triggered the following lockdep warning: ============================================ WARNING: possible recursive locking detected 5.6.0-rc7-custom+ beagleboard#48 Not tainted -------------------------------------------- kworker/u24:0/7 is trying to acquire lock: ffff88817d3a46e0 (sb_internal#2){.+.+}, at: start_transaction+0x66c/0x890 [btrfs] but task is already holding lock: ffff88817d3a46e0 (sb_internal#2){.+.+}, at: start_transaction+0x66c/0x890 [btrfs] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(sb_internal#2); lock(sb_internal#2); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by kworker/u24:0/7: #0: ffff88817b495948 ((wq_completion)btrfs-endio-write){+.+.}, at: process_one_work+0x557/0xb80 beagleboard#1: ffff888189ea7db8 ((work_completion)(&work->normal_work)){+.+.}, at: process_one_work+0x557/0xb80 beagleboard#2: ffff88817d3a46e0 (sb_internal#2){.+.+}, at: start_transaction+0x66c/0x890 [btrfs] beagleboard#3: ffff888174ca4da8 (&fs_info->reloc_mutex){+.+.}, at: btrfs_record_root_in_trans+0x83/0xd0 [btrfs] stack backtrace: CPU: 0 PID: 7 Comm: kworker/u24:0 Not tainted 5.6.0-rc7-custom+ beagleboard#48 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Workqueue: btrfs-endio-write btrfs_work_helper [btrfs] Call Trace: dump_stack+0xc2/0x11a __lock_acquire.cold+0xce/0x214 lock_acquire+0xe6/0x210 __sb_start_write+0x14e/0x290 start_transaction+0x66c/0x890 [btrfs] btrfs_join_transaction+0x1d/0x20 [btrfs] find_free_extent+0x1504/0x1a50 [btrfs] btrfs_reserve_extent+0xd5/0x1f0 [btrfs] btrfs_alloc_tree_block+0x1ac/0x570 [btrfs] btrfs_copy_root+0x213/0x580 [btrfs] create_reloc_root+0x3bd/0x470 [btrfs] btrfs_init_reloc_root+0x2d2/0x310 [btrfs] record_root_in_trans+0x191/0x1d0 [btrfs] btrfs_record_root_in_trans+0x90/0xd0 [btrfs] start_transaction+0x16e/0x890 [btrfs] btrfs_join_transaction+0x1d/0x20 [btrfs] btrfs_finish_ordered_io+0x55d/0xcd0 [btrfs] finish_ordered_fn+0x15/0x20 [btrfs] btrfs_work_helper+0x116/0x9a0 [btrfs] process_one_work+0x632/0xb80 worker_thread+0x80/0x690 kthread+0x1a3/0x1f0 ret_from_fork+0x27/0x50 It's pretty hard to reproduce, only one hit so far. [CAUSE] This is because we're calling btrfs_join_transaction() without re-using the current running one: btrfs_finish_ordered_io() |- btrfs_join_transaction() <<< Call beagleboard#1 |- btrfs_record_root_in_trans() |- btrfs_reserve_extent() |- btrfs_join_transaction() <<< Call beagleboard#2 Normally such btrfs_join_transaction() call should re-use the existing one, without trying to re-start a transaction. But the problem is, in btrfs_join_transaction() call beagleboard#1, we call btrfs_record_root_in_trans() before initializing current::journal_info. And in btrfs_join_transaction() call beagleboard#2, we're relying on current::journal_info to avoid such deadlock. [FIX] Call btrfs_record_root_in_trans() after we have initialized current::journal_info. CC: [email protected] # 4.4+ Signed-off-by: Qu Wenruo <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
RobertCNelson
pushed a commit
that referenced
this issue
Sep 25, 2020
commit f4c23a1 upstream. I got null-ptr-deref in serial8250_start_tx(): [ 78.114630] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 78.123778] Mem abort info: [ 78.126560] ESR = 0x86000007 [ 78.129603] EC = 0x21: IABT (current EL), IL = 32 bits [ 78.134891] SET = 0, FnV = 0 [ 78.137933] EA = 0, S1PTW = 0 [ 78.141064] user pgtable: 64k pages, 48-bit VAs, pgdp=00000027d41a8600 [ 78.147562] [0000000000000000] pgd=00000027893f0003, p4d=00000027893f0003, pud=00000027893f0003, pmd=00000027c9a20003, pte=0000000000000000 [ 78.160029] Internal error: Oops: 86000007 [#1] SMP [ 78.164886] Modules linked in: sunrpc vfat fat aes_ce_blk crypto_simd cryptd aes_ce_cipher crct10dif_ce ghash_ce sha2_ce sha256_arm64 sha1_ce ses enclosure sg sbsa_gwdt ipmi_ssif spi_dw_mmio sch_fq_codel vhost_net tun vhost vhost_iotlb tap ip_tables ext4 mbcache jbd2 ahci hisi_sas_v3_hw libahci hisi_sas_main libsas hns3 scsi_transport_sas hclge libata megaraid_sas ipmi_si hnae3 ipmi_devintf ipmi_msghandler br_netfilter bridge stp llc nvme nvme_core xt_sctp sctp libcrc32c dm_mod nbd [ 78.207383] CPU: 11 PID: 23258 Comm: null-ptr Not tainted 5.8.0-rc6+ #48 [ 78.214056] Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 CS V3.B210.01 03/12/2020 [ 78.222888] pstate: 80400089 (Nzcv daIf +PAN -UAO BTYPE=--) [ 78.228435] pc : 0x0 [ 78.230618] lr : serial8250_start_tx+0x160/0x260 [ 78.235215] sp : ffff800062eefb80 [ 78.238517] x29: ffff800062eefb80 x28: 0000000000000fff [ 78.243807] x27: ffff800062eefd80 x26: ffff202fd83b3000 [ 78.249098] x25: ffff800062eefd80 x24: ffff202fd83b3000 [ 78.254388] x23: ffff002fc5e50be8 x22: 0000000000000002 [ 78.259679] x21: 0000000000000001 x20: 0000000000000000 [ 78.264969] x19: ffffa688827eecc8 x18: 0000000000000000 [ 78.270259] x17: 0000000000000000 x16: 0000000000000000 [ 78.275550] x15: ffffa68881bc67a8 x14: 00000000000002e6 [ 78.280841] x13: ffffa68881bc67a8 x12: 000000000000c539 [ 78.286131] x11: d37a6f4de9bd37a7 x10: ffffa68881cccff0 [ 78.291421] x9 : ffffa68881bc6000 x8 : ffffa688819daa88 [ 78.296711] x7 : ffffa688822a0f20 x6 : ffffa688819e0000 [ 78.302002] x5 : ffff800062eef9d0 x4 : ffffa68881e707a8 [ 78.307292] x3 : 0000000000000000 x2 : 0000000000000002 [ 78.312582] x1 : 0000000000000001 x0 : ffffa688827eecc8 [ 78.317873] Call trace: [ 78.320312] 0x0 [ 78.322147] __uart_start.isra.9+0x64/0x78 [ 78.326229] uart_start+0xb8/0x1c8 [ 78.329620] uart_flush_chars+0x24/0x30 [ 78.333442] n_tty_receive_buf_common+0x7b0/0xc30 [ 78.338128] n_tty_receive_buf+0x44/0x2c8 [ 78.342122] tty_ioctl+0x348/0x11f8 [ 78.345599] ksys_ioctl+0xd8/0xf8 [ 78.348903] __arm64_sys_ioctl+0x2c/0xc8 [ 78.352812] el0_svc_common.constprop.2+0x88/0x1b0 [ 78.357583] do_el0_svc+0x44/0xd0 [ 78.360887] el0_sync_handler+0x14c/0x1d0 [ 78.364880] el0_sync+0x140/0x180 [ 78.368185] Code: bad PC value SERIAL_PORT_DFNS is not defined on each arch, if it's not defined, serial8250_set_defaults() won't be called in serial8250_isa_init_ports(), so the p->serial_in pointer won't be initialized, and it leads a null-ptr-deref. Fix this problem by calling serial8250_set_defaults() after init uart port. Signed-off-by: Yang Yingliang <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
RobertCNelson
pushed a commit
that referenced
this issue
Oct 1, 2021
commit ad9f151 upstream. nft_set_elem_expr_alloc() needs an initialized set if expression sets on the NFT_EXPR_GC flag. Move set fields initialization before expression setup. [4512935.019450] ================================================================== [4512935.019456] BUG: KASAN: null-ptr-deref in nft_set_elem_expr_alloc+0x84/0xd0 [nf_tables] [4512935.019487] Read of size 8 at addr 0000000000000070 by task nft/23532 [4512935.019494] CPU: 1 PID: 23532 Comm: nft Not tainted 5.12.0-rc4+ #48 [...] [4512935.019502] Call Trace: [4512935.019505] dump_stack+0x89/0xb4 [4512935.019512] ? nft_set_elem_expr_alloc+0x84/0xd0 [nf_tables] [4512935.019536] ? nft_set_elem_expr_alloc+0x84/0xd0 [nf_tables] [4512935.019560] kasan_report.cold.12+0x5f/0xd8 [4512935.019566] ? nft_set_elem_expr_alloc+0x84/0xd0 [nf_tables] [4512935.019590] nft_set_elem_expr_alloc+0x84/0xd0 [nf_tables] [4512935.019615] nf_tables_newset+0xc7f/0x1460 [nf_tables] Reported-by: [email protected] Fixes: 6503842 ("netfilter: nf_tables: allow to specify stateful expression in set definition") Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
As currently both RNDIS and CDC Ethernet USB gadget are activated, Windows is not able to load drivers for BeagleBone Black with G_MULTI connected by USB:
from Kernel Documentation:
Could CONFIG_USB_G_MULTI_CDC just be disabled per default?
The text was updated successfully, but these errors were encountered: