SendIR Problem #1636
Comments
|
Took a while before I got it but the problem is with the language. It should have been in English but apparently the German translation is used. So for now you should be able to execute the Sony command as I will change it in the next (pre)release to English as it should be. |
|
Yes, thats the solution , a simple translation bug So i change the json string in the command and get Thanks |
arendst
added a commit
that referenced
this issue
Jan 20, 2018
5.11.1d * Add locale Decimal Separator to Web sensor page * Add command State to retrieve device state information (same data as teleperiod state and status 11 in slightly different JSON format) * Extent state information with Light parameters * Fix IRSend parameter translation (#1636) * Add optional login to Webserver AP mode (#1587, #1635) * Fix BME680 teleperiod resistance measuring (#1647)
arendst
added a commit
that referenced
this issue
Feb 9, 2018
5.12.0 20180209 * Change library PubSubClient.h define MQTT_MAX_PACKET_SIZE from 512 to 1000 for Home Assistant support * Change relation of define MESSZ being dependent on PubSubClient.h define MQTT_MAX_PACKET_SIZE * Change command color parameter input checks to less strict for Home Assistant support * Change command Ina219Mode into command Sensor13 * Change commands HlwPCal, HlwUCal and HlwICal to PowerCal, VoltageCal and CurrentCal to be used for both Pow and S31 calibration * Change commands HlwPSet, HlwUSet and HlwISet to PowerSet, VoltageSet and CurrentSet to be used for both Pow and S31 calibration * Change uptime from hour to second resulting in a display of 123T13:45:21 where 123 is days * Change module name Wemos D1 mini into Generic (#1220) * Change HTML from width=100% to style=width:100% supporting HTML5 (#1358) * Change OSWATCH_RESET_TIME (Blocked loop) from 30 to 120 seconds to allow slow networks (#1556) * Change WIFI_MANAGER_SEC into WIFI_CONFIG_SEC (#1616) * Change function pointers code to save code space and memory (#1683) * Change webserver argument processing gaining 5k code space (#1705) * Change weblog memory usage (#1730, #1793, #1819) * Update TasmotaSerial library to 1.1.0 * Update language files Italian (#1594), Dutch (#1723) and Spanish (#1722) * Fix Non-English JSON temperature unit attachement * Fix Arilux RF induced exception by moving interrupt handler to iram on non ESP8266/Arduino lib v2.3.0 * Fix truncated command names and wrong response for DomoticzSwitchIdx (#1571) * Fix %-sign issue as printf escape character in Humidity and Sonoff SC (#1579) * Fix DS18B20 temperature JSON decimal dot (#1561) * Fix Energy JSON message (#1621) * Fix IRSend parameter translation (#1636) * Fix TSL2561 device detection (#1644, #1825) * Fix BME680 teleperiod resistance measuring (#1647) * Fix Energy Monitoring Energy Today and Energy Total reading after restart (#1648) * Fix IRReceive Data value (#1663) * Fix Energy Monitoring Energy Period roll-over (#1688) * Fix compiler warnings (#1774) * Fix command PWM response if no PWM channel is configured (#1783) * Add locale Decimal Separator to Web sensor page * Add ColorTemperature to light status message * Add command PowerOnState option 5 which inverts PulseTime and allows for delayed always on after power on * Add OtaMagic two step Web server OTA upgrade using filename-minimal image if OTA free space is too small * Add support for PMS5003 and PMS7003 particle concentration sensor * Add command SetOption21 1 to allow Energy Monitoring when power is off on Sonoff Pow and Sonoff S31 (#1420) * Add Chinese language file (#1551) * Add French language file (#1561) * Add Spanish language file (#1589) * Add HTTP Allow Cross Origin removed from ESP8266/Arduino lib v2.4.0 (#1572) * Add Home Assistant MQTT Discovery for switch and light to be enabled by command SetOption19 1 (#1534) or define HOME_ASSISTANT_DISCOVERY_ENABLE in user_config.h (#1685) * Add command State to retrieve device state information (same data as teleperiod state and status 11 in slightly different JSON format) * Add optional login to Webserver AP mode (#1587, #1635) * Add command Sensor15 2 to start MHZ19(B) Zero Point Calibration (#1643) * Add support for Sonoff S31 Smart Socket with Power Consumption Detection (#1626) * Add command SetOption20 to allow update of Dimmer/Color/Ct without turning power on (#1719, #1741) * Add NTP sync time slot based on chip id (#1773) * Add cursor pointer to web button (#1836)
curzon01
pushed a commit
to curzon01/Tasmota
that referenced
this issue
Sep 6, 2018
5.11.1d * Add locale Decimal Separator to Web sensor page * Add command State to retrieve device state information (same data as teleperiod state and status 11 in slightly different JSON format) * Extent state information with Light parameters * Fix IRSend parameter translation (arendst#1636) * Add optional login to Webserver AP mode (arendst#1587, arendst#1635) * Fix BME680 teleperiod resistance measuring (arendst#1647)
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
I have a problem with IRsend and Tasmota/Mqtt (5.11.1) on a sonoff basic (Sorry for my bad english)
Testing Szenario in the console :
irsend {"PROTOCOL":"SONY","BITS":20,"DATA":"691015"}so i get the follwing message:
22:14:18 CMD: irsend {"PROTOCOL":"SONY","BITS":20,"DATA":"691015"} 22:14:18 MQT: tasmota/irsend/stat/RESULT = {"IRSend":"No PROTOKOLL, BITS or DATEN"}the same result when i send from broker directly this teststring:
mosquitto_pub -q 2 -t tasmota/irsend/cmnd/irsend -m '{"protocol": "SAMSUNG","bits": 32, "data": 3772793023}'Where is the problem?
can you help me?
The text was updated successfully, but these errors were encountered: