Fix config file consistency and clarify GCode state command usage (#136…

…) (#452) The PRINT_END macro in the Octopus config file contains a pair of SAVE_GCODE_STATE/RESTORE_GCODE_STATE command. The purpose of those commands is to allow the macro to perfom actions at the end of the print and then restore the printer state as it was prior to the macro's execution (restore coordinate system and speeds). However, there was some confusion as to the effect of those calls, particularly the RESTORE_GCODE_STATE. What is desired is that the printer state is restored but the toolhead position is not. To clarify the intention and prevent any issues, the "MOVE=0" argument to RESTORE_GCODE_STATE is added as to explicitly prevent any toolhead position changes and a comment is added to describe the purpose of the commands. Since having the commands in the PRINT_END macro is something that is needed, the same commands have also been added to any of the other configs which were missing it.
VoronDesign · Nov 22, 2023 · de7e89d · de7e89d
1 parent eed9310
commit de7e89d
Show file tree

Hide file tree

Showing 5 changed files with 42 additions and 9 deletions.
diff --git a/firmware/klipper_configurations/M8P/Voron2_M8P_config.cfg b/firmware/klipper_configurations/M8P/Voron2_M8P_config.cfg
@@ -538,9 +538,12 @@ gcode:
 [gcode_macro PRINT_END]
 #   Use PRINT_END for the slicer ending script - please customise for your slicer of choice
 gcode:
+    SAVE_GCODE_STATE NAME=STATE_PRINT_END
+
     M400                           ; wait for buffer to clear
     G92 E0                         ; zero the extruder
     G1 E-10.0 F3600                ; retract filament
+
     G91                            ; relative positioning
     G0 Z1.00 X20.0 Y20.0 F20000    ; move nozzle to remove stringing
     TURN_OFF_HEATERS
@@ -550,4 +553,10 @@ gcode:
     G0  X125 Y250 F3600            ; park nozzle at rear
     BED_MESH_CLEAR
 
+    # The purpose of the SAVE_GCODE_STATE/RESTORE_GCODE_STATE
+    # command pair is to restore the printer's coordinate system
+    # and speed settings since the commands above change them.
+    # However, to prevent any accidental, unintentional toolhead
+    # moves when restoring the state, explicitly set MOVE=0.
+    RESTORE_GCODE_STATE NAME=STATE_PRINT_END MOVE=0
 
diff --git a/firmware/klipper_configurations/Octopus/Voron2_Octopus_Config.cfg b/firmware/klipper_configurations/Octopus/Voron2_Octopus_Config.cfg
@@ -571,17 +571,23 @@ gcode:
     {% set z_safe = [th.position.z + 2, th.axis_maximum.z]|min %}
 
     SAVE_GCODE_STATE NAME=STATE_PRINT_END
-    
+
     M400                           ; wait for buffer to clear
     G92 E0                         ; zero the extruder
     G1 E-5.0 F1800                 ; retract filament
 
     TURN_OFF_HEATERS
-    
+
     G90                                      ; absolute positioning
     G0 X{x_safe} Y{y_safe} Z{z_safe} F20000  ; move nozzle to remove stringing
     G0 X{th.axis_maximum.x//2} Y{th.axis_maximum.y - 2} F3600  ; park nozzle at rear
     M107                                     ; turn off fan
 
     BED_MESH_CLEAR
-    RESTORE_GCODE_STATE NAME=STATE_PRINT_END
+
+    # The purpose of the SAVE_GCODE_STATE/RESTORE_GCODE_STATE
+    # command pair is to restore the printer's coordinate system
+    # and speed settings since the commands above change them.
+    # However, to prevent any accidental, unintentional toolhead
+    # moves when restoring the state, explicitly set MOVE=0.
+    RESTORE_GCODE_STATE NAME=STATE_PRINT_END MOVE=0
diff --git a/firmware/klipper_configurations/SKR_1.3/Voron2_SKR_13_Config.cfg b/firmware/klipper_configurations/SKR_1.3/Voron2_SKR_13_Config.cfg
@@ -563,7 +563,7 @@ gcode:
     {% set z_safe = [th.position.z + 2, th.axis_maximum.z]|min %}
 
     SAVE_GCODE_STATE NAME=STATE_PRINT_END
-    
+
     M400                           ; wait for buffer to clear
     G92 E0                         ; zero the extruder
     G1 E-5.0 F1800                 ; retract filament
@@ -576,4 +576,10 @@ gcode:
     M107                                     ; turn off fan
 
     BED_MESH_CLEAR
-    RESTORE_GCODE_STATE NAME=STATE_PRINT_END
+
+    # The purpose of the SAVE_GCODE_STATE/RESTORE_GCODE_STATE
+    # command pair is to restore the printer's coordinate system
+    # and speed settings since the commands above change them.
+    # However, to prevent any accidental, unintentional toolhead
+    # moves when restoring the state, explicitly set MOVE=0.
+    RESTORE_GCODE_STATE NAME=STATE_PRINT_END MOVE=0
diff --git a/firmware/klipper_configurations/SKR_1.4/Voron2_SKR_14_Config.cfg b/firmware/klipper_configurations/SKR_1.4/Voron2_SKR_14_Config.cfg
@@ -563,7 +563,7 @@ gcode:
     {% set z_safe = [th.position.z + 2, th.axis_maximum.z]|min %}
 
     SAVE_GCODE_STATE NAME=STATE_PRINT_END
-    
+
     M400                           ; wait for buffer to clear
     G92 E0                         ; zero the extruder
     G1 E-5.0 F1800                 ; retract filament
@@ -576,4 +576,10 @@ gcode:
     M107                                     ; turn off fan
 
     BED_MESH_CLEAR
-    RESTORE_GCODE_STATE NAME=STATE_PRINT_END
+
+    # The purpose of the SAVE_GCODE_STATE/RESTORE_GCODE_STATE
+    # command pair is to restore the printer's coordinate system
+    # and speed settings since the commands above change them.
+    # However, to prevent any accidental, unintentional toolhead
+    # moves when restoring the state, explicitly set MOVE=0.
+    RESTORE_GCODE_STATE NAME=STATE_PRINT_END MOVE=0
diff --git a/firmware/klipper_configurations/Spider/Voron2_Spider_Config.cfg b/firmware/klipper_configurations/Spider/Voron2_Spider_Config.cfg
@@ -506,7 +506,7 @@ gcode:
     {% set z_safe = [th.position.z + 2, th.axis_maximum.z]|min %}
 
     SAVE_GCODE_STATE NAME=STATE_PRINT_END
-    
+
     M400                           ; wait for buffer to clear
     G92 E0                         ; zero the extruder
     G1 E-5.0 F1800                 ; retract filament
@@ -519,4 +519,10 @@ gcode:
     M107                                     ; turn off fan
 
     BED_MESH_CLEAR
-    RESTORE_GCODE_STATE NAME=STATE_PRINT_END
+
+    # The purpose of the SAVE_GCODE_STATE/RESTORE_GCODE_STATE
+    # command pair is to restore the printer's coordinate system
+    # and speed settings since the commands above change them.
+    # However, to prevent any accidental, unintentional toolhead
+    # moves when restoring the state, explicitly set MOVE=0.
+    RESTORE_GCODE_STATE NAME=STATE_PRINT_END MOVE=0