Extended reporting WIP

Marlin/Configuration_adv.h

@@ -2926,6 +2926,9 @@
  * Include capabilities in M115 output
  */
 #define EXTENDED_CAPABILITIES_REPORT
+#if ENABLED(EXTENDED_CAPABILITIES_REPORT)
+  //#define M115_GEOMETRY_REPORT
+#endif
 
 /**
  * Expected Printer Check
@@ -2979,6 +2982,8 @@
 
 //#define GCODE_CASE_INSENSITIVE  // Accept G-code sent to the firmware in lowercase
 
+//#define REPETIER_GCODE_M360     // Add commands originally from Repetier FW
+
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.

Marlin/src/HAL/AVR/HAL.h

@@ -53,6 +53,9 @@
 // AVR PROGMEM extension for sprintf_P
 #define S_FMT "%S"
 
+// AVR PROGMEM extension for string define
+#define PGMSTR(NAM,STR) const char NAM[] PROGMEM = STR
+
 #ifndef CRITICAL_SECTION_START
   #define CRITICAL_SECTION_START()  unsigned char _sreg = SREG; cli()
   #define CRITICAL_SECTION_END()    SREG = _sreg

Marlin/src/HAL/HAL.h

@@ -36,6 +36,11 @@
   #define S_FMT "%s"
 #endif
 
+// String helper
+#ifndef PGMSTR
+  #define PGMSTR(NAM,STR) constexpr char NAM[] = STR
+#endif
+
 inline void watchdog_refresh() {
   TERN_(USE_WATCHDOG, HAL_watchdog_refresh());
 }

Marlin/src/MarlinCore.cpp

@@ -183,26 +183,17 @@
   #include "libs/L64XX/L64XX_Marlin.h"
 #endif
 
-const char NUL_STR[] PROGMEM = "",
-           M112_KILL_STR[] PROGMEM = "M112 Shutdown",
-           G28_STR[] PROGMEM = "G28",
-           M21_STR[] PROGMEM = "M21",
-           M23_STR[] PROGMEM = "M23 %s",
-           M24_STR[] PROGMEM = "M24",
-           SP_P_STR[] PROGMEM = " P",
-           SP_T_STR[] PROGMEM = " T",
-           SP_X_STR[] PROGMEM = " X",
-           SP_Y_STR[] PROGMEM = " Y",
-           SP_Z_STR[] PROGMEM = " Z",
-           SP_E_STR[] PROGMEM = " E",
-              X_LBL[] PROGMEM =  "X:",
-              Y_LBL[] PROGMEM =  "Y:",
-              Z_LBL[] PROGMEM =  "Z:",
-              E_LBL[] PROGMEM =  "E:",
-           SP_X_LBL[] PROGMEM = " X:",
-           SP_Y_LBL[] PROGMEM = " Y:",
-           SP_Z_LBL[] PROGMEM = " Z:",
-           SP_E_LBL[] PROGMEM = " E:";
+PGMSTR(NUL_STR, "");
+PGMSTR(M112_KILL_STR, "M112 Shutdown");
+PGMSTR(G28_STR, "G28");
+PGMSTR(M21_STR, "M21");
+PGMSTR(M23_STR, "M23 %s");
+PGMSTR(M24_STR, "M24");
+PGMSTR(SP_P_STR, " P");  PGMSTR(SP_T_STR, " T");
+PGMSTR(X_STR,     "X");  PGMSTR(Y_STR,     "Y");  PGMSTR(Z_STR,     "Z");  PGMSTR(E_STR,     "E");
+PGMSTR(X_LBL,     "X:"); PGMSTR(Y_LBL,     "Y:"); PGMSTR(Z_LBL,     "Z:"); PGMSTR(E_LBL,     "E:");
+PGMSTR(SP_X_STR, " X");  PGMSTR(SP_Y_STR, " Y");  PGMSTR(SP_Z_STR, " Z");  PGMSTR(SP_E_STR, " E");
+PGMSTR(SP_X_LBL, " X:"); PGMSTR(SP_Y_LBL, " Y:"); PGMSTR(SP_Z_LBL, " Z:"); PGMSTR(SP_E_LBL, " E:");
 
 MarlinState marlin_state = MF_INITIALIZING;
 

Marlin/src/core/serial.cpp

@@ -25,8 +25,8 @@
 
 uint8_t marlin_debug_flags = MARLIN_DEBUG_NONE;
 
-static const char errormagic[] PROGMEM = "Error:";
-static const char echomagic[]  PROGMEM = "echo:";
+static PGMSTR(errormagic, "Error:");
+static PGMSTR(echomagic, "echo:");
 
 #if NUM_SERIAL > 1
   int8_t serial_port_index = 0;

Marlin/src/feature/host_actions.cpp

@@ -64,8 +64,8 @@ void host_action(const char * const pstr, const bool eol) {
 
 #if ENABLED(HOST_PROMPT_SUPPORT)
 
-  const char CONTINUE_STR[] PROGMEM = "Continue",
-             DISMISS_STR[] PROGMEM = "Dismiss";
+  PGMSTR(CONTINUE_STR, "Continue");
+  PGMSTR(DISMISS_STR, "Dismiss");
 
   #if HAS_RESUME_CONTINUE
     extern bool wait_for_user;
@@ -123,7 +123,7 @@ void host_action(const char * const pstr, const bool eol) {
   //
   void host_response_handler(const uint8_t response) {
     #ifdef DEBUG_HOST_ACTIONS
-      static const char m876_prefix[] PROGMEM = "M876 Handle Re";
+      static PGMSTR(m876_prefix, "M876 Handle Re");
       serialprintPGM(m876_prefix); SERIAL_ECHOLNPAIR("ason: ", host_prompt_reason);
       serialprintPGM(m876_prefix); SERIAL_ECHOLNPAIR("sponse: ", response);
     #endif

Marlin/src/gcode/calibrate/G33.cpp

@@ -448,7 +448,7 @@ void GcodeSuite::G33() {
   }
 
   // Report settings
-  PGM_P checkingac = PSTR("Checking... AC");
+  PGM_P const checkingac = PSTR("Checking... AC");
   serialprintPGM(checkingac);
   if (verbose_level == 0) SERIAL_ECHOPGM(" (DRY-RUN)");
   SERIAL_EOL();
@@ -624,7 +624,7 @@ void GcodeSuite::G33() {
       }
     }
     else { // dry run
-      PGM_P enddryrun = PSTR("End DRY-RUN");
+      PGM_P const enddryrun = PSTR("End DRY-RUN");
       serialprintPGM(enddryrun);
       SERIAL_ECHO_SP(35);
       SERIAL_ECHOLNPAIR_F("std dev:", zero_std_dev, 3);

Marlin/src/gcode/control/M111.cpp

@@ -28,21 +28,18 @@
 void GcodeSuite::M111() {
   if (parser.seen('S')) marlin_debug_flags = parser.byteval('S');
 
-  static const char str_debug_1[] PROGMEM = STR_DEBUG_ECHO,
-                    str_debug_2[] PROGMEM = STR_DEBUG_INFO,
-                    str_debug_4[] PROGMEM = STR_DEBUG_ERRORS,
-                    str_debug_8[] PROGMEM = STR_DEBUG_DRYRUN,
-                    str_debug_16[] PROGMEM = STR_DEBUG_COMMUNICATION
-                    #if ENABLED(DEBUG_LEVELING_FEATURE)
-                      , str_debug_lvl[] PROGMEM = STR_DEBUG_LEVELING
-                    #endif
-                    ;
+  static PGMSTR(str_debug_1, STR_DEBUG_ECHO);
+  static PGMSTR(str_debug_2, STR_DEBUG_INFO);
+  static PGMSTR(str_debug_4, STR_DEBUG_ERRORS);
+  static PGMSTR(str_debug_8, STR_DEBUG_DRYRUN);
+  static PGMSTR(str_debug_16, STR_DEBUG_COMMUNICATION);
+  #if ENABLED(DEBUG_LEVELING_FEATURE)
+    static PGMSTR(str_debug_lvl, STR_DEBUG_LEVELING);
+  #endif
 
   static PGM_P const debug_strings[] PROGMEM = {
-    str_debug_1, str_debug_2, str_debug_4, str_debug_8, str_debug_16
-    #if ENABLED(DEBUG_LEVELING_FEATURE)
-      , str_debug_lvl
-    #endif
+    str_debug_1, str_debug_2, str_debug_4, str_debug_8, str_debug_16,
+    TERN_(DEBUG_LEVELING_FEATURE, str_debug_lvl)
   };
 
   SERIAL_ECHO_START();

Marlin/src/gcode/gcode.cpp

@@ -663,6 +663,10 @@ void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) {
         case 305: M305(); break;                                  // M305: Set user thermistor parameters
       #endif
 
+      #if ENABLED(REPETIER_GCODE_M360)
+        case 360: M360(); break;                                  // M360: Firmware settings
+      #endif
+
       #if ENABLED(MORGAN_SCARA)
         case 360: if (M360()) return; break;                      // M360: SCARA Theta pos1
         case 361: if (M361()) return; break;                      // M361: SCARA Theta pos2

Marlin/src/gcode/gcode.h

@@ -691,6 +691,8 @@ class GcodeSuite {
 
   TERN_(HAS_CASE_LIGHT, static void M355());
 
+  TERN_(REPETIER_GCODE_M360, static void M360());
+
   #if ENABLED(MORGAN_SCARA)
     static bool M360();
     static bool M361();

Marlin/src/gcode/host/M115.cpp

@@ -23,6 +23,10 @@
 #include "../gcode.h"
 #include "../../inc/MarlinConfig.h"
 
+#if ENABLED(M115_GEOMETRY_REPORT)
+  #include "../../module/motion.h"
+#endif
+
 #if ENABLED(EXTENDED_CAPABILITIES_REPORT)
   static void cap_line(PGM_P const name, bool ena=false) {
     SERIAL_ECHOPGM("Cap:");
@@ -117,5 +121,28 @@ void GcodeSuite::M115() {
     // CHAMBER_TEMPERATURE (M141, M191)
     cap_line(PSTR("CHAMBER_TEMPERATURE"), ENABLED(HAS_HEATED_CHAMBER));
 
+    // Machine Geometry
+    #if ENABLED(M115_GEOMETRY_REPORT)
+      const xyz_pos_t dmin = { X_MIN_POS, Y_MIN_POS, Z_MIN_POS },
+                      dmax = { X_MAX_POS, Y_MAX_POS, Z_MAX_POS };
+      xyz_pos_t cmin = dmin, cmax = dmax;
+      apply_motion_limits(cmin);
+      apply_motion_limits(cmax);
+      const xyz_pos_t lmin = dmin.asLogical(), lmax = dmax.asLogical(),
+                      wmin = cmin.asLogical(), wmax = cmax.asLogical();
+      SERIAL_ECHOLNPAIR(
+        "area:{"
+          "full:{"
+            "min:{x:", lmin.x, ",y:", lmin.y, ",z:", lmin.z, "},"
+            "max:{x:", lmax.x, ",y:", lmax.y, ",z:", lmax.z, "},"
+          "},"
+          "work:{"
+            "min:{x:", wmin.x, ",y:", wmin.y, ",z:", wmin.z, "},"
+            "max:{x:", wmax.x, ",y:", wmax.y, ",z:", wmax.z, "},"
+          "}"
+        "}"
+      );
+    #endif
+
   #endif // EXTENDED_CAPABILITIES_REPORT
 }