Usermod: Add SkyStrip weather forecast usermod

usermods/usermod_v2_skystrip/FAQ.md

@@ -0,0 +1,109 @@
+# SkyStrip Interpretation Guide
+
+This FAQ explains how to read the various HSV-based views of the
+`usermod_v2_skystrip` module. Each view maps weather data onto hue,
+saturation, and value (brightness) along the LED strip.
+
+
+## Cloud View (CV)
+
+Markers for sunrise or sunset show as orange pixels. During
+precipitation, hue denotes type—deep blue for rain, lavender for snow,
+and indigo for mixed—while value scales with probability. In the
+absence of precipitation, hue differentiates day from night: daylight
+clouds appear pale yellow, nighttime clouds desaturate toward
+white. For clouds, saturation is low and value grows with coverage,
+keeping even thin clouds visible. Thus, a bright blue pixel highlights
+likely rain, whereas a soft yellow glow marks daytime cloud cover.
+
+
+## Wind View (WV)
+
+The hue encodes wind direction around the compass: blue (240°) points
+north, orange (~30°) east, yellow (~60°) south, and green (~120°)
+west, with intermediate shades for diagonal winds. Saturation rises
+with gustiness—calm breezes stay washed out while strong gusts drive
+the color toward full intensity. Value scales with wind strength,
+boosting brightness as the highest of sustained speed or gust
+approaches 50 mph (or equivalent). For example, a saturated blue pixel
+indicates gusty north winds, while a dim pastel green suggests a
+gentle westerly breeze.
+
+The mapping between wind direction and hue can be approximated as:
+
+| Direction | Hue (°) | Color  |
+|-----------|---------|--------|
+| N         | 240     | Blue   |
+| NE        | 300     | Purple |
+| E         | 30      | Orange |
+| SE        | 45      | Gold   |
+| S         | 60      | Yellow |
+| SW        | 90      | Lime   |
+| W         | 120     | Green  |
+| NW        | 180     | Cyan   |
+| N         | 240     | Blue   |
+
+Note: Hues wrap at 360°, so “N” repeats at the boundary.
+
+
+## Temperature View (TV)
+
+Hue follows a calibrated cold→hot gradient tuned for pleasing segment
+appearance: deep blues near 14 °F transition through cyan and green to
+warm yellows at 77 °F and reds at ~104 °F and above. Saturation
+reflects humidity via dew‑point spread; muggy air produces softer,
+desaturated colors, whereas dry air yields vivid tones. Value is fixed
+at mid‑brightness, but local time markers (e.g., noon, midnight)
+temporarily darken pixels to mark time. A bright orange‑red pixel thus
+signifies hot, dry conditions around 95 °F, whereas a pale cyan pixel
+indicates a cool, humid day near 50 °F.
+
+The actual temperature→hue stops used by the renderer are:
+
+| Temp (°F) | Hue (°) | Color       |
+|-----------|---------|-------------|
+| ≤14       | 234.9   | Deep blue   |
+| 32        | 207.0   | Blue/cyan   |
+| 50        | 180.0   | Cyan        |
+| 68        | 138.8   | Greenish    |
+| 77        | 60.0    | Yellow      |
+| 86        | 38.8    | Orange      |
+| 95        | 18.8    | Orange‑red  |
+| ≥104      | 0.0     | Red         |
+
+
+## 24-Hour Delta View (DV)
+
+Hue represents the temperature change relative to the previous day:
+blues for cooling, greens for steady conditions, and yellows through
+reds for warming. Saturation encodes humidity trend—the color
+intensifies as the air grows drier and fades toward pastels when
+becoming more humid. Value increases with the magnitude of change,
+combining temperature and humidity shifts, so bright pixels flag
+larger swings. A dim blue pixel therefore means a slight cool‑down
+with more moisture, while a bright saturated red indicates rapid
+warming coupled with drying.
+
+Approximate mapping of day-to-day deltas to color attributes:
+
+| Temperature | Hue (Color) |
+|-------------|-------------|
+| Cooling     | Blue tones  |
+| Steady      | Green       |
+| Warming     | Yellow→Red  |
+
+| Humidity   | Saturation |
+|------------|------------|
+| More humid | Low/Pastel |
+| Stable     | Medium     |
+| Drier      | High/Vivid |
+
+
+## Test Pattern View (TP)
+
+This diagnostic view simply interpolates hue, saturation, and value
+between configured start and end points along the segment. Hue shifts
+steadily from the starting hue to the ending hue, with saturation and
+brightness following the same linear ramp. It carries no weather
+meaning; a common example is a gradient from black to white to verify
+LED orientation.

usermods/usermod_v2_skystrip/cloud_view.cpp

@@ -0,0 +1,217 @@
+#include "cloud_view.h"
+#include "skymodel.h"
+#include "util.h"
+#include "wled.h"
+#include <algorithm>
+#include <cmath>
+#include <limits>
+
+static constexpr int16_t DEFAULT_SEG_ID = -1; // -1 means disabled
+const char CFG_SEG_ID[] PROGMEM = "SegmentId";
+
+static bool isDay(const SkyModel &m, time_t t) {
+  const time_t MAXTT = std::numeric_limits<time_t>::max();
+  if (m.sunrise_ == 0 && m.sunset_ == MAXTT)
+    return true; // 24h day
+  if (m.sunset_ == 0 && m.sunrise_ == MAXTT)
+    return false; // 24h night
+  constexpr time_t DAY = 24 * 60 * 60;
+  time_t sr = m.sunrise_;
+  time_t ss = m.sunset_;
+  while (t >= ss) {
+    sr += DAY;
+    ss += DAY;
+  }
+  while (t < sr) {
+    sr -= DAY;
+    ss -= DAY;
+  }
+  return t >= sr && t < ss;
+}
+
+CloudView::CloudView() : segId_(DEFAULT_SEG_ID) {
+  DEBUG_PRINTLN("SkyStrip: CV::CTOR");
+  snprintf(debugPixelString, sizeof(debugPixelString), "%s:\\n",
+           name().c_str());
+  debugPixelString[sizeof(debugPixelString) - 1] = '\0';
+}
+
+void CloudView::view(time_t now, SkyModel const &model, int16_t dbgPixelIndex) {
+  if (dbgPixelIndex < 0) {
+    snprintf(debugPixelString, sizeof(debugPixelString), "%s:\\n",
+             name().c_str());
+    debugPixelString[sizeof(debugPixelString) - 1] = '\0';
+  }
+  if (segId_ == DEFAULT_SEG_ID)
+    return;
+  if (model.cloud_cover_forecast.empty())
+    return;
+  if (segId_ < 0 || segId_ >= strip.getMaxSegments())
+    return;
+
+  Segment &seg = strip.getSegment((uint8_t)segId_);
+  int len = seg.virtualLength();
+  if (len <= 0)
+    return;
+  // Initialize segment drawing parameters so virtualLength()/mapping are valid
+  seg.beginDraw();
+  skystrip::util::FreezeGuard freezeGuard(seg, false);
+
+  constexpr double kHorizonSec = 48.0 * 3600.0;
+  const double step = (len > 1) ? (kHorizonSec / double(len - 1)) : 0.0;
+
+  const time_t markerTol = time_t(std::llround(step * 0.5));
+  const time_t sunrise = model.sunrise_;
+  const time_t sunset = model.sunset_;
+  constexpr time_t DAY = 24 * 60 * 60;
+  const time_t MAXTT = std::numeric_limits<time_t>::max();
+
+  long offset = skystrip::util::current_offset();
+
+  bool useSunrise = (sunrise != 0 && sunrise != MAXTT);
+  bool useSunset = (sunset != 0 && sunset != MAXTT);
+  time_t sunriseTOD = 0;
+  time_t sunsetTOD = 0;
+  if (useSunrise)
+    sunriseTOD = (((sunrise + offset) % DAY) + DAY) % DAY; // normalize to [0, DAY)
+  if (useSunset)
+    sunsetTOD = (((sunset + offset) % DAY) + DAY) % DAY;   // normalize to [0, DAY)
+
+  auto nearTOD = [&](time_t a, time_t b) {
+    time_t diff = (a >= b) ? (a - b) : (b - a);
+    if (diff <= markerTol)
+      return true;
+    return (DAY - diff) <= markerTol;
+  };
+
+  auto isMarker = [&](time_t t) {
+    if (!useSunrise && !useSunset)
+      return false;
+    time_t tod = (((t + offset) % DAY) + DAY) % DAY; // normalize to [0, DAY)
+    if (useSunrise && nearTOD(tod, sunriseTOD))
+      return true;
+    if (useSunset && nearTOD(tod, sunsetTOD))
+      return true;
+    return false;
+  };
+
+  constexpr float kCloudMaskThreshold = 0.05f;
+  constexpr float kDayHue = 60.f;
+  constexpr float kNightHue = 300.f;
+  constexpr float kDaySat = 0.30f;
+  constexpr float kNightSat = 0.00f;
+  constexpr float kDayVMax  = 0.40f;
+  constexpr float kNightVMax= 0.40f;
+
+  // Brightness floor as a fraction of Vmax so mid/low clouds stay visible.
+  constexpr float kDayVMinFrac   = 0.50f;  // try 0.40–0.60 to taste
+  constexpr float kNightVMinFrac = 0.50f;  // night can be a bit lower if preferred
+
+  constexpr float kMarkerHue= 25.f;
+  constexpr float kMarkerSat= 0.60f;
+  constexpr float kMarkerVal= 0.50f;
+
+  for (int i = 0; i < len; ++i) {
+    const time_t t = now + time_t(std::llround(step * i));
+    double clouds, precipTypeVal, precipProb;
+    if (!skystrip::util::estimateCloudAt(model, t, step, clouds))
+      continue;
+    if (!skystrip::util::estimatePrecipTypeAt(model, t, step, precipTypeVal))
+      precipTypeVal = 0.0;
+    if (!skystrip::util::estimatePrecipProbAt(model, t, step, precipProb))
+      precipProb = 0.0;
+
+    float clouds01 = skystrip::util::clamp01(float(clouds / 100.0));
+    int p = int(std::round(precipTypeVal));
+    bool daytime = isDay(model, t);
+
+
+    float hue = 0.f, sat = 0.f, val = 0.f;
+    if (isMarker(t)) {
+      // always put the sunrise sunset markers in
+      hue = kMarkerHue;
+      sat = kMarkerSat;
+      val = kMarkerVal;
+    } else if (p != 0 && precipProb > 0.0) {
+      // precipitation has next priority: rain=blue, snow=lavender,
+      // mixed=indigo-ish blend
+      constexpr float kHueRain = 210.f; // deep blue
+      constexpr float kSatRain = 1.00f;
+
+      constexpr float kHueSnow = 285.f; // lavender for snow
+      constexpr float kSatSnow = 0.35f; // pastel-ish (tune to taste)
+
+      float ph, ps;
+      if (p == 1) {
+        // rain
+        ph = kHueRain;
+        ps = kSatRain;
+      } else if (p == 2) {
+        // snow → lavender
+        ph = kHueSnow;
+        ps = kSatSnow;
+      } else {
+        // mixed → halfway between blue and lavender
+        ph = 0.5f * (kHueRain + kHueSnow); // ~247.5° (indigo-ish)
+        ps = 0.5f * (kSatRain + kSatSnow); // ~0.675
+      }
+
+      float pv = skystrip::util::clamp01(float(precipProb));
+      pv = 0.3f + 0.7f * pv; // brightness ramp
+      hue = ph;
+      sat = ps;
+      val = pv;
+    } else {
+      // finally show daytime or nightime clouds
+      if (clouds01 < kCloudMaskThreshold) {
+        hue = 0.f;
+        sat = 0.f;
+        val = 0.f;
+      } else {
+        float vmax = daytime ? kDayVMax : kNightVMax;
+        float vmin = (daytime ? kDayVMinFrac : kNightVMinFrac) * vmax;
+        // Use sqrt curve to boost brightness at lower cloud coverage
+        val  = vmin + (vmax - vmin) * sqrtf(clouds01);
+        hue = daytime ? kDayHue : kNightHue;
+        sat = daytime ? kDaySat : kNightSat;
+      }
+    }
+
+    uint32_t col = skystrip::util::hsv2rgb(hue, sat, val);
+    seg.setPixelColor(i, skystrip::util::blinkDebug(i, dbgPixelIndex, col));
+
+    if (dbgPixelIndex >= 0) {
+      static time_t lastDebug = 0;
+      if (now - lastDebug > 1 && i == dbgPixelIndex) {
+        char nowbuf[20];
+        skystrip::util::fmt_local(nowbuf, sizeof(nowbuf), now);
+        char dbgbuf[20];
+        skystrip::util::fmt_local(dbgbuf, sizeof(dbgbuf), t);
+        snprintf(debugPixelString, sizeof(debugPixelString),
+                 "%s: nowtm=%s dbgndx=%d dbgtm=%s day=%d clouds01=%.2f precip=%d pop=%.2f H=%.0f S=%.0f V=%.0f\\n",
+                 name().c_str(), nowbuf, i, dbgbuf, daytime, clouds01, p,
+                 precipProb, hue, sat * 100, val * 100);
+        lastDebug = now;
+      }
+    }
+  }
+}
+
+void CloudView::addToConfig(JsonObject &subtree) {
+  subtree[FPSTR(CFG_SEG_ID)] = segId_;
+}
+
+void CloudView::appendConfigData(Print &s) {
+  // Keep the hint INLINE (BEFORE the input = 4th arg):
+  s.print(F("addInfo('SkyStrip:CloudView:SegmentId',1,'',"
+            "'&nbsp;<small style=\\'opacity:.8\\'>(-1 disables)</small>'"
+            ");"));
+}
+
+bool CloudView::readFromConfig(JsonObject &subtree, bool startup_complete,
+                               bool &invalidate_history) {
+  bool configComplete = !subtree.isNull();
+  configComplete &=
+      getJsonValue(subtree[FPSTR(CFG_SEG_ID)], segId_, DEFAULT_SEG_ID);
+  return configComplete;
+}

usermods/usermod_v2_skystrip/cloud_view.h

@@ -0,0 +1,27 @@
+#pragma once
+
+#include "interfaces.h"
+#include "skymodel.h"
+
+class SkyModel;
+
+class CloudView : public IDataViewT<SkyModel> {
+public:
+  CloudView();
+  ~CloudView() override = default;
+
+  void view(time_t now, SkyModel const & model, int16_t dbgPixelIndex) override;
+  std::string name() const override { return "CV"; }
+  void appendDebugPixel(Print& s) const override { s.print(debugPixelString); }
+
+  void addToConfig(JsonObject& subtree) override;
+  void appendConfigData(Print& s) override;
+  bool readFromConfig(JsonObject& subtree,
+                      bool startup_complete,
+                      bool& invalidate_history) override;
+  const char* configKey() const override { return "CloudView"; }
+
+private:
+  int16_t segId_;
+  char debugPixelString[128];
+};