The OnePlus 7 Pro (codenamed "guacamole") is a flagship smartphone from OnePlus. It was released in May 2019.
| Hardware | Spec Sheet |
|---|---|
| CPU | Octa-core (1x2.84 GHz Kryo 485 & 3x2.42 GHz Kryo 485 & 4x1.78 GHz Kryo 485) |
| Chipset | Qualcomm SM8150 Snapdragon 855 (7 nm) |
| GPU | Adreno 640 |
| Memory | 6/8/12 GB RAM |
| Shipped Android Version | 9.0 ("Pie") / OxygenOS 10 ("Q") |
| Storage | 128/256 GB |
| Battery | Non-removable Li-Po 4000 mAh battery |
| Display | Fluid AMOLED capacitive touchscreen, 16M colors, 6.67 inches, 1440 x 3120 pixels, 19.5:9 ratio (~516 ppi density) |
| Camera (Back) | Triple setup: 48 MP (f/1.6, wide, 1/2", 0.8µm, PDAF, Laser AF, OIS) + 8 MP (f/2.4, 78mm, telephoto, 3x optical zoom, |
| PDAF, Laser AF, OIS) + 16 MP (f/2.2, 13mm, ultrawide, AF), Dual-LED flash, panorama, HDR, 2160p@30/60fps, 1080p@30/60/240fps, | |
| 720p@480fps, Auto HDR, gyro-EIS | |
| Camera (Front) | Motorized pop-up 16 MP, f/2.0, 25mm (wide), 1/3.0", 1.0µm, Auto-HDR, 1080p@30fps, gyro-EIS |
Currently these devices are supported:
| codename | Devicename | Target area | projectname | baseband (rf) |
|---|---|---|---|---|
| GM1911 | OnePlus 7 Pro | India | 18821 | 3 |
| GM1913 | OnePlus 7 Pro | Europe (-EEA) | 18821 | 4 |
| GM1917 | OnePlus 7 Pro | Global/US | 18821 | 5 |
Unsupported as of writing:
| codename | Devicename | Target area | projectname | baseband (rf) |
|---|---|---|---|---|
| GM1910 | OnePlus 7 Pro | China | 18821 | 1 |
| GM1915 | OnePlus 7 Pro | T-Mobile | 18831 | - |
| GM1920 | OnePlus 7 Pro NR | Europe (5G) | 18827 | - |
| GM1925 | OnePlus 7 Pro NR | US (Sprint 5G) | 18825 | 5 |
projectname = android projectname defined by the vendor system props "ro.boot.project_name" or "ro.vendor.boot.project_name" baseband = defined baseband by the vendor system prop "ro.boot.rf_version"
Copyright 2019 - The AICP Project.
Pre-installation:
- OOS 12 firmware is mandatory and is build into the ROM
- Download a recovery image, e.g. LineageOS recovery image
- Optionally download a GApps package of your choice, recommended are MindTheGapps 13
First time installation (clean flash):
- Press and hold the volume down button and the power button, and release the power button when you see the OnePlus logo.
- Keep holding the volume down button until you see the recovery screen. connect the phone via USB to the PC.
- Wipe the device (factory reset)
-
Choose "Apply update" from the menu. In the next screen choose "Apply from ADB" (sideload)
adb sideload aicp_guacamole_t-18.0-WEEKLY-20221112.zip -
After it finished, back to main menu and choose "Advanced", choose "Reboot to recovery"
-
in recovery again repeat step (1) and (2)
-
Choose "Apply update" from the menu.
-
Choose "Apply from ADB" (sideload)
adb sideload MindTheGapps-13.0.0-arm64-20221025_100653.zip -
After it finishes, reboot the system.