IIC-OSIC-TOOLS is an all-in-one Docker image for SKY130/GF180/IHP130-based analog and digital chip design. AMD64 and ARM64 are natively supported.
-
Updated
Jul 16, 2024 - Python
IIC-OSIC-TOOLS is an all-in-one Docker image for SKY130/GF180/IHP130-based analog and digital chip design. AMD64 and ARM64 are natively supported.
This project shows the design of a frequency synthesizer PLL system that produces a 1.92 GHz signal with a reference input of 30 MHz, with a comparison between using an LC VCO and using a Ring VCO.
Python script for generating lookup tables for the gm/ID design methodology and much more ...
This project is about designing a 1.5 bit stage Pipeline ADC & the OpAmp required for its MDAC.
This project shows the design process of the main blocks of a typical RX frontend system.
A MATLAB project that uses modified nodal analysis to calculate the node voltages of any analog circuit.
Online viewer of Xschem schematic files
This project presents a 10Gb/s transceiver design using 65nm CMOS process, based on a 10GBASE-KR standard.
An LTspice project which contains third-order Butterworth filters built both using an inductor and a current conveyor.
This library is an attempt to make transistor sizing for Analog design less painful.
This project shows the design of two 4-bit current steering DACs, based on Binary and Segmented architectures at VDD=1.8V supply, using high-swing cascode current mirror structures for the current source arrays.
This project is about building a Clocked Comparator to be used in a 4-bit Flash ADC & minimize the ADC Figure of Merit given by FoM = Power / (fs*2ENOB).
This project is about building a high FOM 2.4 GHz LNA for Bluetooth Low-Energy (BLE) Standards, using 45nm CMOS technology.
Design of 6T, 8T and 10T SRAM Cells with Static Noise Margin Analysis
This project shows how to design a clock bootstrapped circuit to improve the nonlinearity of the switch used in Track & Hold circuit. A comparison is done between several topologies, showing the ENOB, SNR, & SFDR achieved in each case.
Parametric analysis/visualization of model/measurement/simulation results
Providing examples on how to setup and use xschem, ngspice, and gaw, to do analog IC design
DEPRECATED. Use circus instead
Add a description, image, and links to the analog-design topic page so that developers can more easily learn about it.
To associate your repository with the analog-design topic, visit your repo's landing page and select "manage topics."