Preconditions
Checkout the archive:
git clone [email protected]:tnl-rwa/lpc55-rust-sandbox.git
cd lpc55-rust-sandbox
git submodule update --init --recursive
Use a system with Windows and WSL2 or use native Linux system Tested with Ubuntu20.04 WSL2 system, but should work with any ditribution Should also work with a native Linux system, any OS
Download the Segger J-Link GDB server from: https://www.segger.com/downloads/jlink/
Start the JLink GDB Server (Windows example)
C:\SEGGER\JLink\JLinkGDBServer.exe -strict -device LPC55S69 -if SWD -vd
Install and start VsCode
Install plugins: Name: Remote Development Id: ms-vscode-remote.vscode-remote-extensionpack
Name: Remote - Containers
Id: ms-vscode-remote.remote-containers
Name: Remote - SSH
Id: ms-vscode-remote.remote-ssh
Windows only:
Name: Remote - WSL
Id: ms-vscode-remote.remote-wsl
Open the folder in Vscode, in WSL. A popup will appear at the bottom right that suggests to open the project in a container. Do that.
It takes a while to build the container.
After successful load, press F5 to build and debug the project on the target.
In launch.json you can change the executable line to debug another example, eg task
Things that could be done
- Create tasks, inter task communication, shared resources, queueus etc.
- Get USB working: CDCACM, HID, Whatever
- Read write flash
- I/O: SPI, I2C
- Connect and control devices:
- Onboard NXP MMA8652FCR1 accelerometer
- nRF2L01
- MFRC-522 RC522 RFID RF IC card
- HC-SR501 Adjust IR Pyroelectric Infrared PIR Motion Sensor Detector
- 433Mhz RF transmitter and receiver kit TK0460
- 4x4 Matrix 16 Key Membrane Switch Keypad
- AT-09 IOS BLE 4.0 Bluetooth module CC2540 CC2541
- Mini 1.8 Inch Spi 128X160 Dot Cmmpatible 1602 5110
- I2C Twi Spi Seriële Interface 20X4 Karakter HD44780 Controller
- 0.96 "I2C 128X64 Lcd Display SSD1306 12864
- 0.96 "SPI 128X64 Lcd Display SSD1306 12864