thinkyhead · thinkyhead · Jul 31, 2015 · Jul 31, 2015
diff --git a/Marlin/pins_AZTEEG_X3.h b/Marlin/pins_AZTEEG_X3.h
@@ -8,24 +8,24 @@
 
 #if ENABLED(VIKI2) || ENABLED(miniVIKI)
 
- #define BEEPER_PIN 33
+  #define BEEPER_PIN        33
 
  // Pins for DOGM SPI LCD Support
- #define DOGLCD_A0  31 
- #define DOGLCD_CS  32 
- #define LCD_SCREEN_ROT_180
- 
- //The encoder and click button 
- #define BTN_EN1 22 
- #define BTN_EN2 7
- #define BTN_ENC 12  //the click switch
- 
- #define SDSS 53
- #define SDCARDDETECT -1 // Pin 49 if using display sd interface   
- 
+  #define DOGLCD_A0         31
+  #define DOGLCD_CS         32
+  #define LCD_SCREEN_ROT_180
+
+ //The encoder and click button
+  #define BTN_EN1           22
+  #define BTN_EN2            7
+  #define BTN_ENC           12  //the click switch
+
+  #define SDSS              53
+  #define SDCARDDETECT      -1  // Pin 49 if using display sd interface
+
   #if ENABLED(TEMP_STAT_LEDS)
-    #define STAT_LED_RED 64
-    #define STAT_LED_BLUE 63
+    #define STAT_LED_RED    64
+    #define STAT_LED_BLUE   63
   #endif
 
 #elif ENABLED(TEMP_STAT_LEDS)

diff --git a/Marlin/pins_MINIRAMBO.h b/Marlin/pins_MINIRAMBO.h
@@ -3,10 +3,10 @@
  */
 
 #ifndef __AVR_ATmega2560__
-#error Oops!  Make sure you have 'Arduino Mega 2560 or Rambo' selected from the 'Tools -> Boards' menu.
+  #error Oops!  Make sure you have 'Arduino Mega 2560 or Rambo' selected from the 'Tools -> Boards' menu.
 #endif
 
-#define LARGE_FLASH true
+#define LARGE_FLASH         true
 
 
 #undef X_MS1_PIN
@@ -20,94 +20,94 @@
 #undef E1_MS1_PIN
 #undef E1_MS2_PIN
 
-#define X_STEP_PIN 37
-#define X_DIR_PIN 48
-#define X_MIN_PIN 12
-#define X_MAX_PIN 30
-#define X_ENABLE_PIN 29
-#define X_MS1_PIN 40
-#define X_MS2_PIN 41
-
-#define Y_STEP_PIN 36
-#define Y_DIR_PIN 49
-#define Y_MIN_PIN 11
-#define Y_MAX_PIN 24
-#define Y_ENABLE_PIN 28
-#define Y_MS1_PIN 69
-#define Y_MS2_PIN 39
-
-#define Z_STEP_PIN 35
-#define Z_DIR_PIN 47
-#define Z_MIN_PIN 10
-#define Z_MAX_PIN 23
-#define Z_ENABLE_PIN 27
-#define Z_MS1_PIN 68
-#define Z_MS2_PIN 67
-
-#define HEATER_BED_PIN 4
-#define TEMP_BED_PIN 2
-
-#define HEATER_0_PIN 3
-#define TEMP_0_PIN 0
-
-#define HEATER_1_PIN 7
-#define TEMP_1_PIN 1
+#define X_STEP_PIN          37
+#define X_DIR_PIN           48
+#define X_MIN_PIN           12
+#define X_MAX_PIN           30
+#define X_ENABLE_PIN        29
+#define X_MS1_PIN           40
+#define X_MS2_PIN           41
+
+#define Y_STEP_PIN          36
+#define Y_DIR_PIN           49
+#define Y_MIN_PIN           11
+#define Y_MAX_PIN           24
+#define Y_ENABLE_PIN        28
+#define Y_MS1_PIN           69
+#define Y_MS2_PIN           39
+
+#define Z_STEP_PIN          35
+#define Z_DIR_PIN           47
+#define Z_MIN_PIN           10
+#define Z_MAX_PIN           23
+#define Z_ENABLE_PIN        27
+#define Z_MS1_PIN           68
+#define Z_MS2_PIN           67
+
+#define HEATER_BED_PIN       4
+#define TEMP_BED_PIN         2
+
+#define HEATER_0_PIN         3
+#define TEMP_0_PIN           0
+
+#define HEATER_1_PIN         7
+#define TEMP_1_PIN           1
 
 #if ENABLED(BARICUDA)
-  #define HEATER_2_PIN 6
+  #define HEATER_2_PIN       6
 #else
-  #define HEATER_2_PIN -1
+  #define HEATER_2_PIN      -1
 #endif
 
-#define TEMP_2_PIN -1
+#define TEMP_2_PIN          -1
 
 #define E0_STEP_PIN         34
 #define E0_DIR_PIN          43
 #define E0_ENABLE_PIN       26
-#define E0_MS1_PIN 65
-#define E0_MS2_PIN 66
+#define E0_MS1_PIN          65
+#define E0_MS2_PIN          66
 
 #define E1_STEP_PIN         -1
 #define E1_DIR_PIN          -1
 #define E1_ENABLE_PIN       -1
-#define E1_MS1_PIN -1
-#define E1_MS2_PIN -1
+#define E1_MS1_PIN          -1
+#define E1_MS2_PIN          -1
 
 #define MOTOR_CURRENT_PWM_XY_PIN 46
-#define MOTOR_CURRENT_PWM_Z_PIN 45
-#define MOTOR_CURRENT_PWM_E_PIN 44
+#define MOTOR_CURRENT_PWM_Z_PIN  45
+#define MOTOR_CURRENT_PWM_E_PIN  44
 //Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range
 #define MOTOR_CURRENT_PWM_RANGE 2000
 #define DEFAULT_PWM_MOTOR_CURRENT  {1300, 1300, 1250}
-#define SDPOWER            -1
-#define SDSS               53
-#define LED_PIN            13
-#define FAN_PIN            8
-#define FAN_1_PIN 6
-#define PS_ON_PIN          -1
-#define KILL_PIN           -1 //80 with Smart Controller LCD
-#define SUICIDE_PIN        -1  //PIN that has to be turned on right after start, to keep power flowing.
+#define SDPOWER             -1
+#define SDSS                53
+#define LED_PIN             13
+#define FAN_PIN              8
+#define FAN_1_PIN            6
+#define PS_ON_PIN           -1
+#define KILL_PIN            -1  // 80 with Smart Controller LCD
+#define SUICIDE_PIN         -1  // PIN that has to be turned on right after start, to keep power flowing.
 
 #if ENABLED(ULTRA_LCD)
 
-  #define KILL_PIN 32
+  #define KILL_PIN          32
 
   #if ENABLED(NEWPANEL)
 
-    #define BEEPER_PIN 84      // Beeper on AUX-4
-    #define LCD_PINS_RS 82
+    #define BEEPER_PIN      84  // Beeper on AUX-4
+    #define LCD_PINS_RS     82
     #define LCD_PINS_ENABLE 18
-    #define LCD_PINS_D4 19
-    #define LCD_PINS_D5 70
-    #define LCD_PINS_D6 85
-    #define LCD_PINS_D7 71
+    #define LCD_PINS_D4     19
+    #define LCD_PINS_D5     70
+    #define LCD_PINS_D6     85
+    #define LCD_PINS_D7     71
 
     //buttons are directly attached using AUX-2
-    #define BTN_EN1 14
-    #define BTN_EN2 72
-    #define BTN_ENC 9  //the click
+    #define BTN_EN1         14
+    #define BTN_EN2         72
+    #define BTN_ENC          9  // the click
 
-    #define SDCARDDETECT 15
+    #define SDCARDDETECT    15
 
   #endif //NEWPANEL
 #endif //ULTRA_LCD
diff --git a/Marlin/pins_TEENSYLU.h b/Marlin/pins_TEENSYLU.h
@@ -69,16 +69,16 @@
 
 #if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)
 
-  #define BEEPER_PIN -1
+  #define BEEPER_PIN       -1
 
   #if ENABLED(LCD_I2C_PANELOLU2)
-    #define BTN_EN1 27  //RX1 - fastio.h pin mapping 27
-    #define BTN_EN2 26  //TX1 - fastio.h pin mapping 26
-    #define BTN_ENC 43 //A3 - fastio.h pin mapping 43
-    #define SDSS   40 //use SD card on Panelolu2 (Teensyduino pin mapping)
+    #define BTN_EN1        27  //RX1 - fastio.h pin mapping 27
+    #define BTN_EN2        26  //TX1 - fastio.h pin mapping 26
+    #define BTN_ENC        43  //A3 - fastio.h pin mapping 43
+    #define SDSS           40  //use SD card on Panelolu2 (Teensyduino pin mapping)
   #endif // LCD_I2C_PANELOLU2
 
-  #define SDCARDDETECT -1    
+  #define SDCARDDETECT     -1
 
 #endif // ULTRA_LCD && NEWPANEL