v23.4.15

General

This is the first version which supports the new HMS/HMT inverters. The documentation is still not perfect, so maybe you have to know what you are doing :-) Further improvements will come.

🐛 Fixes

• fix typo
• Fix crash if radio settings where changed while the radio was not initialized
• Fix: Set correct frequency when changing it via web ui
• Fix: Change defines to get a correct calculation if base frequency of CMT module is different compared to Hoymiles base frequency

📚 Documentation

• Doc: Added sample device profile for CMT and NRF module
• Doc: Added new supported inverters
• Doc: Added some device profiles containing the CMT2300A pin assignment
• Doc: Added some remarks regarding the CMT2300A module
• Doc: Added MPP-Tracker count

🛠 Under the hood

• vscode: Recommend additional extensions for development
• one more typo
• Merge branch 'pr805' into dev
• Added CMT2300 driver
• Added first implementation of HMS inverter classes
• Move reference to the radio instance into the inverter instance
• Add a HoymilesRadio base class
• Move serveral methods from the HoymilesRadio_NRF class to the HoymilesRadio base class
• Added HMS/HMT devices to the DevInfoParser
• Implement HoymilesRadio_CMT
• Add variable for max channel count (to extend serveral arrays)
• Replaced println by printf and code style changes
• Allow dynamic pin mapping for CMT module
• webapp: Show CMT pins in device manager
• First rough implementation of HMT inverters
• Set DTU serial for CMT modules
• Check that all RF modules as in idle mode before sending mqtt packages
• Simplify dumpBuf method in HoymilesRadio
• webapp: Added cmt radio status to system overview
• webapp: Adjusted radio problem hint in home view to detect problems of nrf and cmt radios
• Change max power limit from 1500W to 2250W to support HMS/HMT inverters
• Use TimeoutHelper for TX timeout
• Implement different Eventlog messages for HMT inverters
• Set CMT to 13dBm and added parameter values in plain text
• Increase CMT SPI speed to 4 MHz
• First step towards a modular CMT2300 driver similar to the NRF24 one
• Adjust name from CMT2300a to CMT2300A
• Move alarm messages from heap to stack
• Allow configuration of the TX PA Level of the CMT2300A module
• Introduce gpio2 for the CMT2300A module
• Adjusted some comments
• Implement cmtBaseChOff860 as a define
• Implement property in HoymilesRadio_CMT to set the frequency during runtime
• Added configuration of CMT modules frequency to webapp
• Add newline after log output
• Increase command timeouts to support inverters with 6 channels and more phases
• Expose min and max frequency in HoymilesRadio_CMT
• webapp: Nicer cmt frequency input
• Initialize spiClass only if valid pin config was found
• Set CMT frequency only if a valid pin config was found
• webapp: Implement CMT pa level as range control
• webapp: Remove hard coded texts in dtuadmin view
• webapp: Add hint to cmt frequency that it can take up to 15min until a connection is established
• Adjust buffer size in StatisticsParser for inverters with more inputs
• IsReachable of the inverter was never reached
• Implemented blocking write method in CMT2300 driver and use it in sendEsbPacket.
• Replace HOY_BASE_FREQ by CMT_BASE_FREQ
• Implement get and set channel in cmt2300 wrapper class
• Optimize cmtChToFreq method to return float instead of string. Renamed also to getFrequencyFromChannel
• Replace multiple print calls by a single printf in HoymilesRadio_NRF
• Rename cmtFreqToChan to getChannelFromFrequency and simplify handling of current channel
• Implement CMD56 as own command.
• Remove cmtProocess method and move RF logic into the cmt2300wrapper class
• Resend and Retransmit count is now implementable per command
• Send ChannelChangeCommand only once per cycle as the inverter will not response at all
• Enabled additional statistics data for HMT inverters
• webapp: Update dependencies
• webapp: add app.js.gz