Basic Knowledge¶ ↑

# README.EXT - -*- RDoc -*- created at: Mon Aug 7 16:45:54 JST 1995

This document explains how to make extension libraries for Ruby.

Basic Knowledge¶ ↑

In C, variables have types and data do not have types. In contrast, Ruby variables do not have a static type, and data themselves have types, so data will need to be converted between the languages.

Data in Ruby are represented by the C type ‘VALUE’. Each VALUE data has its data-type.

To retrieve C data from a VALUE, you need to:

Identify the VALUE’s data type
Convert the VALUE into C data

Converting to the wrong data type may cause serious problems.

Data-Types¶ ↑

The Ruby interpreter has the following data types:

T_NIL: nil
T_OBJECT: ordinary object
T_CLASS: class
T_MODULE: module
T_FLOAT: floating point number
T_STRING: string
T_REGEXP: regular expression
T_ARRAY: array
T_HASH: associative array
T_STRUCT: (Ruby) structure
T_BIGNUM: multi precision integer
T_FIXNUM: Fixnum(31bit or 63bit integer)
T_COMPLEX: complex number
T_RATIONAL: rational number
T_FILE: IO
T_TRUE: true
T_FALSE: false
T_DATA: data
T_SYMBOL: symbol

In addition, there are several other types used internally:

T_ICLASS: included module
T_MATCH: MatchData object
T_UNDEF: undefined
T_NODE: syntax tree node
T_ZOMBIE: object awaiting finalization

Most of the types are represented by C structures.

Check Data Type of the VALUE¶ ↑

The macro TYPE() defined in ruby.h shows the data type of the VALUE. TYPE() returns the constant number T_XXXX described above. To handle data types, your code will look something like this:

switch (TYPE(obj)) {
  case T_FIXNUM:
    /* process Fixnum */
    break;
  case T_STRING:
    /* process String */
    break;
  case T_ARRAY:
    /* process Array */
    break;
  default:
    /* raise exception */
    rb_raise(rb_eTypeError, "not valid value");
    break;
}

There is the data-type check function

void Check_Type(VALUE value, int type)

which raises an exception if the VALUE does not have the type specified.

There are also faster check macros for fixnums and nil.

FIXNUM_P(obj)
NIL_P(obj)

Convert VALUE into C Data¶ ↑

The data for type T_NIL, T_FALSE, T_TRUE are nil, false, true respectively. They are singletons for the data type. The equivalent C constants are: Qnil, Qfalse, Qtrue. Note that Qfalse is false in C also (i.e. 0), but not Qnil.

The T_FIXNUM data is a 31bit or 63bit length fixed integer. This size is depend on the size of long: if long is 32bit then T_FIXNUM is 31bit, if long is 64bit then T_FIXNUM is 63bit. T_FIXNUM can be converted to a C integer by using the FIX2INT() macro or FIX2LONG(). Though you have to check that the data is really FIXNUM before using them, they are faster. FIX2LONG() never raises exceptions, but FIX2INT() raises RangeError if the result is bigger or smaller than the size of int. There are also NUM2INT() and NUM2LONG() which converts any Ruby numbers into C integers. These macros includes a type check, so an exception will be raised if the conversion failed. NUM2DBL() can be used to retrieve the double float value in the same way.

You can use the macros StringValue() and StringValuePtr() to get a char* from a VALUE. StringValue(var) replaces var’s value with the result of “var.to_str()”. StringValuePtr(var) does same replacement and returns char* representation of var. These macros will skip the replacement if var is a String. Notice that the macros take only the lvalue as their argument, to change the value of var in place.

You can also use the macro named StringValueCStr(). This is just like StringValuePtr(), but always add nul character at the end of the result. If the result contains nul character, this macro causes the ArgumentError exception. StringValuePtr() doesn’t guarantee the existence of a nul at the end of the result, and the result may contain nul.

Other data types have corresponding C structures, e.g. struct RArray for T_ARRAY etc. The VALUE of the type which has the corresponding structure can be cast to retrieve the pointer to the struct. The casting macro will be of the form RXXXX for each data type; for instance, RARRAY(obj). See “ruby.h”.

There are some accessing macros for structure members, for example ‘RSTRING_LEN(str)’ to get the size of the Ruby String object. The allocated region can be accessed by ‘RSTRING_PTR(str)’. For arrays, use ‘RARRAY_LEN(ary)’ and ‘RARRAY_PTR(ary)’ respectively.

Notice: Do not change the value of the structure directly, unless you are responsible for the result. This ends up being the cause of interesting bugs.

Convert C Data into VALUE¶ ↑

To convert C data to Ruby values:

FIXNUM: left shift 1 bit, and turn on LSB.
Other pointer values: cast to VALUE.

You can determine whether a VALUE is pointer or not by checking its LSB.

Notice Ruby does not allow arbitrary pointer values to be a VALUE. They should be pointers to the structures which Ruby knows about. The known structures are defined in <ruby.h>.

To convert C numbers to Ruby values, use these macros.

INT2FIX(): for integers within 31bits.
INT2NUM(): for arbitrary sized integer.

INT2NUM() converts an integer into a Bignum if it is out of the FIXNUM range, but is a bit slower.

Manipulating Ruby Data¶ ↑

As I already mentioned, it is not recommended to modify an object’s internal structure. To manipulate objects, use the functions supplied by the Ruby interpreter. Some (not all) of the useful functions are listed below:

String Functions¶ ↑

rb_str_new(const char *ptr, long len)

Creates a new Ruby string.

rb_str_new2(const char *ptr)

rb_str_new_cstr(const char *ptr)

Creates a new Ruby string from a C string. This is equivalent to rb_str_new(ptr, strlen(ptr)).

rb_tainted_str_new(const char *ptr, long len)

Creates a new tainted Ruby string. Strings from external data sources should be tainted.

rb_tainted_str_new2(const char *ptr)

rb_tainted_str_new_cstr(const char *ptr)

Creates a new tainted Ruby string from a C string.

rb_sprintf(const char *format, …)

rb_vsprintf(const char *format, va_list ap)

Creates a new Ruby string with printf(3) format.

Note: In the format string, %i is used for Object#to_s (or Object#inspect if ‘+’ flag is set) output (and related argument must be a VALUE). For integers in format strings, use %d.

rb_str_cat(VALUE str, const char *ptr, long len)

Appends len bytes of data from ptr to the Ruby string.

rb_str_cat2(VALUE str, const char* ptr)

Appends C string ptr to Ruby string str. This function is equivalent to rb_str_cat(str, ptr, strlen(ptr)).

rb_str_catf(VALUE str, const char* format, …)

rb_str_vcatf(VALUE str, const char* format, va_list ap)

Appends C string format and successive arguments to Ruby string str according to a printf-like format. These functions are equivalent to rb_str_cat2(str, rb_sprintf(format, …)) and rb_str_cat2(str, rb_vsprintf(format, ap)), respectively.

rb_enc_str_new(const char *ptr, long len, rb_encoding *enc)

Creates a new Ruby string with the specified encoding.

rb_usascii_str_new(const char *ptr, long len)

rb_usascii_str_new_cstr(const char *ptr)

Creates a new Ruby string with encoding US-ASCII.

rb_str_resize(VALUE str, long len)

Resizes Ruby string to len bytes. If str is not modifiable, this function raises an exception. The length of str must be set in advance. If len is less than the old length the content beyond len bytes is discarded, else if len is greater than the old length the content beyond the old length bytes will not be preserved but will be garbage. Note that RSTRING_PTR(str) may change by calling this function.

rb_str_set_len(VALUE str, long len)

Sets the length of Ruby string. If str is not modifiable, this function raises an exception. This function preserves the content upto len bytes, regardless RSTRING_LEN(str). len must not exceed the capacity of str.

Array Functions¶ ↑

rb_ary_new(): Creates an array with no elements.
rb_ary_new2(long len): Creates an array with no elements, allocating internal buffer for len elements.
rb_ary_new3(long n, …): Creates an n-element array from the arguments.
rb_ary_new4(long n, VALUE *elts): Creates an n-element array from a C array.
rb_ary_to_ary(VALUE obj): Converts the object into an array. Equivalent to Object#to_ary.

There are many functions to operate an array. They may dump core if other types are given.

rb_ary_aref(argc, VALUE *argv, VALUE ary): Equivaelent to Array#[].
rb_ary_entry(VALUE ary, long offset): ary
rb_ary_subseq(VALUE ary, long beg, long len): ary[beg, len]
rb_ary_push(VALUE ary, VALUE val)
rb_ary_pop(VALUE ary)
rb_ary_shift(VALUE ary)
rb_ary_unshift(VALUE ary, VALUE val)
rb_ary_cat(VALUE ary, const VALUE *ptr, long len): Appends len elements of objects from ptr to the array.

Extending Ruby with C¶ ↑

Adding New Features to Ruby¶ ↑

You can add new features (classes, methods, etc.) to the Ruby interpreter. Ruby provides APIs for defining the following things:

Classes, Modules
Methods, Singleton Methods
Constants

Class and Module Definition¶ ↑

To define a class or module, use the functions below:

VALUE rb_define_class(const char *name, VALUE super)
VALUE rb_define_module(const char *name)

These functions return the newly created class or module. You may want to save this reference into a variable to use later.

To define nested classes or modules, use the functions below:

VALUE rb_define_class_under(VALUE outer, const char *name, VALUE super)
VALUE rb_define_module_under(VALUE outer, const char *name)

Method and Singleton Method Definition¶ ↑

To define methods or singleton methods, use these functions:

void rb_define_method(VALUE klass, const char *name,

VALUE (*func)(), int argc)

void rb_define_singleton_method(VALUE object, const char *name,

VALUE (*func)(), int argc)

The ‘argc’ represents the number of the arguments to the C function, which must be less than 17. But I doubt you’ll need that many.

If ‘argc’ is negative, it specifies the calling sequence, not number of the arguments.

If argc is -1, the function will be called as:

VALUE func(int argc, VALUE *argv, VALUE obj)

where argc is the actual number of arguments, argv is the C array of the arguments, and obj is the receiver.

If argc is -2, the arguments are passed in a Ruby array. The function will be called like:

VALUE func(VALUE obj, VALUE args)

where obj is the receiver, and args is the Ruby array containing actual arguments.

There are some more functions to define methods. One takes an ID as the name of method to be defined. See also ID or Symbol below.

void rb_define_method_id(VALUE klass, ID name,
                         VALUE (*func)(ANYARGS), int argc)

There are two functions to define private/protected methods:

void rb_define_private_method(VALUE klass, const char *name,

VALUE (*func)(), int argc)

void rb_define_protected_method(VALUE klass, const char *name,

VALUE (*func)(), int argc)

At last, rb_define_module_function defines a module functions, which are private AND singleton methods of the module. For example, sqrt is the module function defined in Math module. It can be called in the following way:

Math.sqrt(4)

or

include Math
sqrt(4)

To define module functions, use:

void rb_define_module_function(VALUE module, const char *name,

VALUE (*func)(), int argc)

In addition, function-like methods, which are private methods defined in the Kernel module, can be defined using:

void rb_define_global_function(const char *name, VALUE (*func)(), int argc)

To define an alias for the method,

void rb_define_alias(VALUE module, const char* new, const char* old);

To define a reader/writer for an attribute,

void rb_define_attr(VALUE klass, const char *name, int read, int write)

To define and undefine the ‘allocate’ class method,

void rb_define_alloc_func(VALUE klass, VALUE (*func)(VALUE klass));
void rb_undef_alloc_func(VALUE klass);

func has to take the klass as the argument and return a newly allocated instance. This instance should be as empty as possible, without any expensive (including external) resources.

Constant Definition¶ ↑

We have 2 functions to define constants:

void rb_define_const(VALUE klass, const char *name, VALUE val)
void rb_define_global_const(const char *name, VALUE val)

The former is to define a constant under specified class/module. The latter is to define a global constant.

Use Ruby Features from C¶ ↑

There are several ways to invoke Ruby’s features from C code.

Evaluate Ruby Programs in a String¶ ↑

The easiest way to use Ruby’s functionality from a C program is to evaluate the string as Ruby program. This function will do the job:

VALUE rb_eval_string(const char *str)

Evaluation is done under the current context, thus current local variables of the innermost method (which is defined by Ruby) can be accessed.

Note that the evaluation can raise an exception. There is a safer function:

VALUE rb_eval_string_protect(const char *str, int *state)

It returns nil when an error occur. Moreover, *state is zero if str was successfully evaluated, or nonzero otherwise.

ID or Symbol¶ ↑

You can invoke methods directly, without parsing the string. First I need to explain about ID. ID is the integer number to represent Ruby’s identifiers such as variable names. The Ruby data type corresponding to ID is Symbol. It can be accessed from Ruby in the form:

:Identifier

or

:"any kind of string"

You can get the ID value from a string within C code by using

rb_intern(const char *name)
rb_intern_str(VALUE name)

You can retrieve ID from Ruby object (Symbol or String) given as an argument by using

rb_to_id(VALUE symbol)
rb_check_id(volatile VALUE *name)
rb_check_id_cstr(const char *name, long len, rb_encoding *enc)

These functions try to convert the argument to a String if it was not a Symbol nor a String. The second function stores the converted result into *name, and returns 0 if the string is not a known symbol. After this function returned a non-zero value, *name is always a Symbol or a String, otherwise it is a String if the result is 0. The third function takes NUL-terminated C string, not Ruby VALUE.

You can convert C ID to Ruby Symbol by using

VALUE ID2SYM(ID id)

and to convert Ruby Symbol object to ID, use

ID SYM2ID(VALUE symbol)

Invoke Ruby Method from C¶ ↑

To invoke methods directly, you can use the function below

VALUE rb_funcall(VALUE recv, ID mid, int argc, ...)

This function invokes a method on the recv, with the method name specified by the symbol mid.

Accessing the Variables and Constants¶ ↑

You can access class variables and instance variables using access functions. Also, global variables can be shared between both environments. There’s no way to access Ruby’s local variables.

The functions to access/modify instance variables are below:

VALUE rb_ivar_get(VALUE obj, ID id)
VALUE rb_ivar_set(VALUE obj, ID id, VALUE val)

id must be the symbol, which can be retrieved by rb_intern().

To access the constants of the class/module:

VALUE rb_const_get(VALUE obj, ID id)

Ruby Constants That C Can Be Accessed From C¶ ↑

As stated in section 1.3, the following Ruby constants can be referred from C.

Qtrue
Qfalse

Boolean values. Qfalse is false in C also (i.e. 0).

Qnil

Ruby nil in C scope.

Global Variables Shared Between C and Ruby¶ ↑

Information can be shared between the two environments using shared global variables. To define them, you can use functions listed below:

void rb_define_variable(const char *name, VALUE *var)

This function defines the variable which is shared by both environments. The value of the global variable pointed to by ‘var’ can be accessed through Ruby’s global variable named ‘name’.

You can define read-only (from Ruby, of course) variables using the function below.

void rb_define_readonly_variable(const char *name, VALUE *var)

You can defined hooked variables. The accessor functions (getter and setter) are called on access to the hooked variables.

void rb_define_hooked_variable(const char *name, VALUE *var,

VALUE (*getter)(), void (*setter)())

If you need to supply either setter or getter, just supply 0 for the hook you don’t need. If both hooks are 0, rb_define_hooked_variable() works just like rb_define_variable().

The prototypes of the getter and setter functions are as follows:

VALUE (*getter)(ID id, VALUE *var);
void (*setter)(VALUE val, ID id, VALUE *var);

Also you can define a Ruby global variable without a corresponding C variable. The value of the variable will be set/get only by hooks.

void rb_define_virtual_variable(const char *name,

VALUE (*getter)(), void (*setter)())

The prototypes of the getter and setter functions are as follows:

VALUE (*getter)(ID id);
void (*setter)(VALUE val, ID id);

Encapsulate C Data into a Ruby Object¶ ↑

To wrap and objectify a C pointer as a Ruby object (so called DATA), use Data_Wrap_Struct().

Data_Wrap_Struct(klass, mark, free, sval)

Data_Wrap_Struct() returns a created DATA object. The klass argument is the class for the DATA object. The mark argument is the function to mark Ruby objects pointed by this data. The free argument is the function to free the pointer allocation. If this is -1, the pointer will be just freed. The functions mark and free will be called from garbage collector.

These mark / free functions are invoked during GC execution. No object allocations are allowed during it, so do not allocate ruby objects inside them.

You can allocate and wrap the structure in one step.

Data_Make_Struct(klass, type, mark, free, sval)

This macro returns an allocated Data object, wrapping the pointer to the structure, which is also allocated. This macro works like:

(sval = ALLOC(type), Data_Wrap_Struct(klass, mark, free, sval))

Arguments klass, mark, and free work like their counterparts in Data_Wrap_Struct(). A pointer to the allocated structure will be assigned to sval, which should be a pointer of the type specified.

To retrieve the C pointer from the Data object, use the macro Data_Get_Struct().

Data_Get_Struct(obj, type, sval)

A pointer to the structure will be assigned to the variable sval.

See the example below for details.

Example - Creating dbm Extension¶ ↑

OK, here’s the example of making an extension library. This is the extension to access DBMs. The full source is included in the ext/ directory in the Ruby’s source tree.

Make the Directory¶ ↑

% mkdir ext/dbm

Make a directory for the extension library under ext directory.

Design the Library¶ ↑

You need to design the library features, before making it.

Write the C Code¶ ↑

You need to write C code for your extension library. If your library has only one source file, choosing “LIBRARY.c” as a file name is preferred. On the other hand, in case your library has multiple source files, avoid choosing “LIBRARY.c” for a file name. It may conflict with an intermediate file “LIBRARY.o” on some platforms. Note that some functions in mkmf library described below generate a file “conftest.c” for checking with compilation. You shouldn’t choose “conftest.c” as a name of a source file.

Ruby will execute the initializing function named “Init_LIBRARY” in the library. For example, “Init_dbm()” will be executed when loading the library.

Here’s the example of an initializing function.

void
Init_dbm(void)
{
    /* define DBM class */
    cDBM = rb_define_class("DBM", rb_cObject);
    /* DBM includes Enumerate module */
    rb_include_module(cDBM, rb_mEnumerable);

    /* DBM has class method open(): arguments are received as C array */
    rb_define_singleton_method(cDBM, "open", fdbm_s_open, -1);

    /* DBM instance method close(): no args */
    rb_define_method(cDBM, "close", fdbm_close, 0);
    /* DBM instance method []: 1 argument */
    rb_define_method(cDBM, "[]", fdbm_fetch, 1);

    /* ... */

    /* ID for a instance variable to store DBM data */
    id_dbm = rb_intern("dbm");
}

The dbm extension wraps the dbm struct in the C environment using Data_Make_Struct.

struct dbmdata {
    int  di_size;
    DBM *di_dbm;
};

obj = Data_Make_Struct(klass, struct dbmdata, 0, free_dbm, dbmp);

This code wraps the dbmdata structure into a Ruby object. We avoid wrapping DBM* directly, because we want to cache size information.

To retrieve the dbmdata structure from a Ruby object, we define the following macro:

#define GetDBM(obj, dbmp) {\
    Data_Get_Struct(obj, struct dbmdata, dbmp);\
    if (dbmp->di_dbm == 0) closed_dbm();\
}

This sort of complicated macro does the retrieving and close checking for the DBM.

There are three kinds of way to receive method arguments. First, methods with a fixed number of arguments receive arguments like this:

static VALUE
fdbm_delete(VALUE obj, VALUE keystr)
{
      /* ... */
}

The first argument of the C function is the self, the rest are the arguments to the method.

Second, methods with an arbitrary number of arguments receive arguments like this:

static VALUE
fdbm_s_open(int argc, VALUE *argv, VALUE klass)
{
    /* ... */
    if (rb_scan_args(argc, argv, "11", &file, &vmode) == 1) {
        mode = 0666;		/* default value */
    }
    /* ... */
}

The first argument is the number of method arguments, the second argument is the C array of the method arguments, and the third argument is the receiver of the method.

You can use the function rb_scan_args() to check and retrieve the arguments. The third argument is a string that specifies how to capture method arguments and assign them to the following VALUE references.

The following is an example of a method that takes arguments by Ruby’s array:

static VALUE
thread_initialize(VALUE thread, VALUE args)
{
    /* ... */
}

The first argument is the receiver, the second one is the Ruby array which contains the arguments to the method.

Notice: GC should know about global variables which refer to Ruby’s objects, but are not exported to the Ruby world. You need to protect them by

void rb_global_variable(VALUE *var)

Prepare extconf.rb¶ ↑

If the file named extconf.rb exists, it will be executed to generate Makefile.

extconf.rb is the file for checking compilation conditions etc. You need to put

require 'mkmf'

at the top of the file. You can use the functions below to check various conditions.

have_macro(macro[, headers[, opt]]): check whether macro is defined
have_library(lib[, func[, headers[, opt]]]): check whether library containing function exists
find_library(lib[, func, *paths]): find library from paths
have_func(func[, headers[, opt]): check whether function exists
have_var(var[, headers[, opt]]): check whether variable exists
have_header(header[, preheaders[, opt]]): check whether header file exists
find_header(header, *paths): find header from paths
have_framework(fw): check whether framework exists (for MacOS X)
have_struct_member(type, member[, headers[, opt]]): check whether struct has member
have_type(type[, headers[, opt]]): check whether type exists
find_type(type, opt, *headers): check whether type exists in headers
have_const(const[, headers[, opt]]): check whether constant is defined
check_sizeof(type[, headers[, opts]]): check size of type
check_signedness(type[, headers[, opts]]): check signedness of type
convertible_int(type[, headers[, opts]]): find convertible integer type
find_executable(bin[, path]): find excutable file path
create_header(header): generate configured header
create_makefile(target[, target_prefix]): generate Makefile

See MakeMakefile for full documentation of these functions.

The value of the variables below will affect the Makefile.

$CFLAGS: included in CFLAGS make variable (such as -O)
$CPPFLAGS: included in CPPFLAGS make variable (such as -I, -D)
$LDFLAGS: included in LDFLAGS make variable (such as -L)
$objs: list of object file names

Normally, the object files list is automatically generated by searching source files, but you must define them explicitly if any sources will be generated while building.

If a compilation condition is not fulfilled, you should not call “create_makefile”. The Makefile will not be generated, compilation will not be done.

Prepare Depend (Optional)¶ ↑

If the file named depend exists, Makefile will include that file to check dependencies. You can make this file by invoking

% gcc -MM *.c > depend

It’s harmless. Prepare it.

Generate Makefile¶ ↑

Try generating the Makefile by:

ruby extconf.rb

If the library should be installed under vendor_ruby directory instead of site_ruby directory, use –vendor option as follows.

ruby extconf.rb --vendor

You don’t need this step if you put the extension library under the ext directory of the ruby source tree. In that case, compilation of the interpreter will do this step for you.

Run make¶ ↑

Type

make

to compile your extension. You don’t need this step either if you have put the extension library under the ext directory of the ruby source tree.

Debug¶ ↑

You may need to rb_debug the extension. Extensions can be linked statically by adding the directory name in the ext/Setup file so that you can inspect the extension with the debugger.

Done! Now You Have the Extension Library¶ ↑

You can do anything you want with your library. The author of Ruby will not claim any restrictions on your code depending on the Ruby API. Feel free to use, modify, distribute or sell your program.

Appendix A. Ruby Source Files Overview¶ ↑

Ruby Language Core¶ ↑

class.c: classes and modules
error.c: exception classes and exception mechanism
gc.c: memory management
load.c: library loading
object.c: objects
variable.c: variables and constants

Ruby Syntax Parser¶ ↑

parse.y: grammar definition
parse.c: automatically generated from parse.y
keywords: reserved keywords
lex.c: automatically generated from keywords

Ruby Evaluator (a.k.a. YARV)¶ ↑

compile.c
eval.c
eval_error.c
eval_jump.c
eval_safe.c
insns.def           : definition of VM instructions
iseq.c              : implementation of VM::ISeq
thread.c            : thread management and context swiching
thread_win32.c      : thread implementation
thread_pthread.c    : ditto
vm.c
vm_dump.c
vm_eval.c
vm_exec.c
vm_insnhelper.c
vm_method.c

opt_insns_unif.def  : instruction unification
opt_operand.def     : definitions for optimization

  -> insn*.inc      : automatically generated
  -> opt*.inc       : automatically generated
  -> vm.inc         : automatically generated

Regular Expression Engine (Oniguruma)¶ ↑

regex.c
regcomp.c
regenc.c
regerror.c
regexec.c
regparse.c
regsyntax.c

Utility Functions¶ ↑

debug.c: debug symbols for C debuggger
dln.c: dynamic loading
st.c: general purpose hash table
strftime.c: formatting times
util.c: misc utilities

Ruby Interpreter Implementation¶ ↑

dmyext.c
dmydln.c
dmyencoding.c
id.c
inits.c
main.c
ruby.c
version.c

gem_prelude.rb
prelude.rb

Class Library¶ ↑

array.c: Array
bignum.c: Bignum
compar.c: Comparable
complex.c: Complex
cont.c: Fiber, Continuation
dir.c: Dir
enum.c: Enumerable
enumerator.c: Enumerator
file.c: File
hash.c: Hash
io.c: IO
marshal.c: Marshal
math.c: Math
numeric.c: Numeric, Integer, Fixnum, Float
pack.c: Array#pack, String#unpack
proc.c: Binding, Proc
process.c: Process
random.c: random number
range.c: Range
rational.c: Rational
re.c: Regexp, MatchData
signal.c: Signal
sprintf.c: String#sprintf
string.c: String
struct.c: Struct
time.c: Time
defs/known_errors.def: Errno::* exception classes
-> known_errors.inc: automatically generated

Multilingualization¶ ↑

encoding.c: Encoding
transcode.c: Encoding::Converter
enc/*.c: encoding classes
enc/trans/*: codepoint mapping tables

goruby Interpreter Implementation¶ ↑

goruby.c
golf_prelude.rb     : goruby specific libraries.
  -> golf_prelude.c : automatically generated

Appendix B. Ruby Extension API Reference¶ ↑

Types¶ ↑

VALUE: The type for the Ruby object. Actual structures are defined in ruby.h, such as struct RString, etc. To refer the values in structures, use casting macros like RSTRING(obj).

Variables and Constants¶ ↑

Qnil: nil object
Qtrue: true object (default true value)
Qfalse: false object

C Pointer Wrapping¶ ↑

Data_Wrap_Struct(VALUE klass, void (*mark)(), void (*free)(), void *sval): Wrap a C pointer into a Ruby object. If object has references to other Ruby objects, they should be marked by using the mark function during the GC process. Otherwise, mark should be 0. When this object is no longer referred by anywhere, the pointer will be discarded by free function.
Data_Make_Struct(klass, type, mark, free, sval): This macro allocates memory using malloc(), assigns it to the variable sval, and returns the DATA encapsulating the pointer to memory region.
Data_Get_Struct(data, type, sval): This macro retrieves the pointer value from DATA, and assigns it to the variable sval.

Checking Data Types¶ ↑

TYPE(value): Internal type (T_NIL, T_FIXNUM, etc.)
FIXNUM_P(value): Is value a Fixnum?
NIL_P(value): Is value nil?
void Check_Type(VALUE value, int type): Ensures value is of the given internal type or raises a TypeError
SaveStringValue(value): Checks that value is a String and is not tainted

Data Type Conversion¶ ↑

FIX2INT(value), INT2FIX(i): Fixnum <-> integer
FIX2LONG(value), LONG2FIX(l): Fixnum <-> long
NUM2INT(value), INT2NUM(i): Numeric <-> integer
NUM2UINT(value), UINT2NUM(ui): Numeric <-> unsigned integer
NUM2LONG(value), LONG2NUM(l): Numeric <-> long
NUM2ULONG(value), ULONG2NUM(ul): Numeric <-> unsigned long
NUM2LL(value), LL2NUM(ll): Numeric <-> long long
NUM2ULL(value), ULL2NUM(ull): Numeric <-> unsigned long long
NUM2OFFT(value), OFFT2NUM(off): Numeric <-> off_t
NUM2SIZET(value), SIZET2NUM(size): Numeric <-> size_t
NUM2SSIZET(value), SSIZET2NUM(ssize): Numeric <-> ssize_t
NUM2DBL(value): Numeric -> double
rb_float_new(f): double -> Float
StringValue(value): Object with #to_str -> String
StringValuePtr(value): Object with #to_str -> pointer to String data
StringValueCStr(value): Object with #to_str -> pointer to String data without NULL bytes
rb_str_new2(s): char * -> String

Defining Class and Module¶ ↑

VALUE rb_define_class(const char *name, VALUE super): Defines a new Ruby class as a subclass of super.
VALUE rb_define_class_under(VALUE module, const char *name, VALUE super): Creates a new Ruby class as a subclass of super, under the module’s namespace.
VALUE rb_define_module(const char *name): Defines a new Ruby module.
VALUE rb_define_module_under(VALUE module, const char *name): Defines a new Ruby module under the module’s namespace.
void rb_include_module(VALUE klass, VALUE module): Includes module into class. If class already includes it, just ignored.
void rb_extend_object(VALUE object, VALUE module): Extend the object with the module’s attributes.

Defining Global Variables¶ ↑

void rb_define_variable(const char *name, VALUE *var)

Defines a global variable which is shared between C and Ruby. If name contains a character which is not allowed to be part of the symbol, it can’t be seen from Ruby programs.

void rb_define_readonly_variable(const char *name, VALUE *var)

Defines a read-only global variable. Works just like rb_define_variable(), except the defined variable is read-only.

void rb_define_virtual_variable(const char *name, VALUE (*getter)(), VALUE (*setter)())

Defines a virtual variable, whose behavior is defined by a pair of C functions. The getter function is called when the variable is referenced. The setter function is called when the variable is set to a value. The prototype for getter/setter functions are:

VALUE getter(ID id)
void setter(VALUE val, ID id)

The getter function must return the value for the access.

void rb_define_hooked_variable(const char *name, VALUE *var, VALUE (*getter)(), VALUE (*setter)())

Defines hooked variable. It’s a virtual variable with a C variable. The getter is called as

VALUE getter(ID id, VALUE *var)

returning a new value. The setter is called as

void setter(VALUE val, ID id, VALUE *var)

GC requires C global variables which hold Ruby values to be marked.

void rb_global_variable(VALUE *var)

Tells GC to protect these variables.

Constant Definition¶ ↑

void rb_define_const(VALUE klass, const char *name, VALUE val)

Defines a new constant under the class/module.

void rb_define_global_const(const char *name, VALUE val)

Defines a global constant. This is just the same as

rb_define_const(cKernal, name, val)

Method Definition¶ ↑

rb_define_method(VALUE klass, const char *name, VALUE (*func)(), int argc)

Defines a method for the class. func is the function pointer. argc is the number of arguments. if argc is -1, the function will receive 3 arguments: argc, argv, and self. if argc is -2, the function will receive 2 arguments, self and args, where args is a Ruby array of the method arguments.

rb_define_private_method(VALUE klass, const char *name, VALUE (*func)(), int argc)

Defines a private method for the class. Arguments are same as rb_define_method().

rb_define_singleton_method(VALUE klass, const char *name, VALUE (*func)(), int argc)

Defines a singleton method. Arguments are same as rb_define_method().

rb_scan_args(int argc, VALUE *argv, const char *fmt, …)

Retrieve argument from argc and argv to given VALUE references according to the format string. The format can be described in ABNF as follows:

scan-arg-spec  := param-arg-spec [option-hash-arg-spec] [block-arg-spec]

param-arg-spec := pre-arg-spec [post-arg-spec] / post-arg-spec /
                  pre-opt-post-arg-spec
pre-arg-spec   := num-of-leading-mandatory-args [num-of-optional-args]
post-arg-spec  := sym-for-variable-length-args
                  [num-of-trailing-mandatory-args]
pre-opt-post-arg-spec := num-of-leading-mandatory-args num-of-optional-args
                         num-of-trailing-mandatory-args
option-hash-arg-spec := sym-for-option-hash-arg
block-arg-spec := sym-for-block-arg

num-of-leading-mandatory-args  := DIGIT ; The number of leading
                                        ; mandatory arguments
num-of-optional-args           := DIGIT ; The number of optional
                                        ; arguments
sym-for-variable-length-args   := "*"   ; Indicates that variable
                                        ; length arguments are
                                        ; captured as a ruby array
num-of-trailing-mandatory-args := DIGIT ; The number of trailing
                                        ; mandatory arguments
sym-for-option-hash-arg        := ":"   ; Indicates that an option
                                        ; hash is captured if the last
                                        ; argument is a hash or can be
                                        ; converted to a hash with
                                        ; #to_hash.  When the last
                                        ; argument is nil, it is
                                        ; captured if it is not
                                        ; ambiguous to take it as
                                        ; empty option hash; i.e. '*'
                                        ; is not specified and
                                        ; arguments are given more
                                        ; than sufficient.
sym-for-block-arg              := "&"   ; Indicates that an iterator
                                        ; block should be captured if
                                        ; given

For example, “12” means that the method requires at least one argument, and at most receives three (1+2) arguments. So, the format string must be followed by three variable references, which are to be assigned to captured arguments. For omitted arguments, variables are set to Qnil. NULL can be put in place of a variable reference, which means the corresponding captured argument(s) should be just dropped.

The number of given arguments, excluding an option hash or iterator block, is returned.

Invoking Ruby method¶ ↑

VALUE rb_funcall(VALUE recv, ID mid, int narg, …): Invokes a method. To retrieve mid from a method name, use rb_intern().
VALUE rb_funcall2(VALUE recv, ID mid, int argc, VALUE *argv): Invokes a method, passing arguments by an array of values.
VALUE rb_eval_string(const char *str): Compiles and executes the string as a Ruby program.
ID rb_intern(const char *name): Returns ID corresponding to the name.
char *rb_id2name(ID id): Returns the name corresponding ID.
char *rb_class2name(VALUE klass): Returns the name of the class.
int rb_respond_to(VALUE object, ID id): Returns true if the object responds to the message specified by id.

Instance Variables¶ ↑

VALUE rb_iv_get(VALUE obj, const char *name): Retrieve the value of the instance variable. If the name is not prefixed by ‘@’, that variable shall be inaccessible from Ruby.
VALUE rb_iv_set(VALUE obj, const char *name, VALUE val): Sets the value of the instance variable.

Control Structure¶ ↑

VALUE rb_block_call(VALUE recv, ID mid, int argc, VALUE * argv, VALUE (*func) (ANYARGS), VALUE data2): Calls a method on the recv, with the method name specified by the symbol mid, with argc arguments in argv, supplying func as the block. When func is called as the block, it will receive the value from yield as the first argument, and data2 as the second argument. When yielded with multiple values (in C, rb_yield_values(), rb_yield_values2() and rb_yield_splat()), data2 is packed as an Array, whereas yielded values can be gotten via argc/argv of the third/fourth arguments.

OBSOLETE

VALUE rb_iterate(VALUE (*func1)(), void *arg1, VALUE (*func2)(), void *arg2)

Calls the function func1, supplying func2 as the block.  func1 will be
called with the argument arg1.  func2 receives the value from yield as
the first argument, arg2 as the second argument.

When rb_iterate is used in 1.9, func1 has to call some Ruby-level method.
This function is obsolete since 1.9; use rb_block_call instead.

VALUE rb_yield(VALUE val): Evaluates the block with value val.
VALUE rb_rescue(VALUE (*func1)(), VALUE arg1, VALUE (*func2)(), VALUE arg2): Calls the function func1, with arg1 as the argument. If an exception occurs during func1, it calls func2 with arg2 as the argument. The return value of rb_rescue() is the return value from func1 if no exception occurs, from func2 otherwise.
VALUE rb_ensure(VALUE (*func1)(), VALUE arg1, VALUE (*func2)(), VALUE arg2): Calls the function func1 with arg1 as the argument, then calls func2 with arg2 if execution terminated. The return value from rb_ensure() is that of func1 when no exception occured.
VALUE rb_protect(VALUE (*func) (VALUE), VALUE arg, int *state): Calls the function func with arg as the argument. If no exception occured during func, it returns the result of func and *state is zero. Otherwise, it returns Qnil and sets *state to nonzero. If state is NULL, it is not set in both cases. You have to clear the error info with rb_set_errinfo(Qnil) when ignoring the caught exception.
void rb_jump_tag(int state): Continues the exception caught by rb_protect() and rb_eval_string_protect(). state must be the returned value from those functions. This function never return to the caller.
void rb_iter_break(): Exits from the current innermost block. This function never return to the caller.
void rb_iter_break_value(VALUE value): Exits from the current innermost block with the value. The block will return the given argument value. This function never return to the caller.

Exceptions and Errors¶ ↑

void rb_warn(const char *fmt, …): Prints a warning message according to a printf-like format.
void rb_warning(const char *fmt, …): Prints a warning message according to a printf-like format, if $VERBOSE is true.
void rb_raise(rb_eRuntimeError, const char *fmt, …): Raises RuntimeError. The fmt is a format string just like printf().
void rb_raise(VALUE exception, const char *fmt, …): Raises a class exception. The fmt is a format string just like printf().
void rb_fatal(const char *fmt, …): Raises a fatal error, terminates the interpreter. No exception handling will be done for fatal errors, but ensure blocks will be executed.
void rb_bug(const char *fmt, …): Terminates the interpreter immediately. This function should be called under the situation caused by the bug in the interpreter. No exception handling nor ensure execution will be done.

Note: In the format string, %i is used for Object#to_s (or Object#inspect if ‘+’ flag is set) output (and related argument must be a VALUE). For integers in format strings, use %d.

Initialize and Start the Interpreter¶ ↑

The embedding API functions are below (not needed for extension libraries):

void ruby_init(): Initializes the interpreter.
void ruby_options(int argc, char **argv): Process command line arguments for the interpreter.
void ruby_run(): Starts execution of the interpreter.
void ruby_script(char *name): Specifies the name of the script ($0).

Hooks for the Interpreter Events¶ ↑

void rb_add_event_hook(rb_event_hook_func_t func, rb_event_flag_t events,
                       VALUE data)

Adds a hook function for the specified interpreter events. events should be OR’ed value of:

RUBY_EVENT_LINE
RUBY_EVENT_CLASS
RUBY_EVENT_END
RUBY_EVENT_CALL
RUBY_EVENT_RETURN
RUBY_EVENT_C_CALL
RUBY_EVENT_C_RETURN
RUBY_EVENT_RAISE
RUBY_EVENT_ALL

The definition of rb_event_hook_func_t is below:

typedef void (*rb_event_hook_func_t)(rb_event_t event, VALUE data,
                                     VALUE self, ID id, VALUE klass)

The third argument ‘data’ to rb_add_event_hook() is passed to the hook function as the second argument, which was the pointer to the current NODE in 1.8. See RB_EVENT_HOOKS_HAVE_CALLBACK_DATA below.

int rb_remove_event_hook(rb_event_hook_func_t func)

Removes the specified hook function.

Macros for Compatibility¶ ↑

Some macros to check API compatibilities are available by default.

NORETURN_STYLE_NEW: Means that NORETURN macro is functional style instead of prefix.
HAVE_RB_DEFINE_ALLOC_FUNC: Means that function rb_define_alloc_func() is provided, that means the allocation framework is used. This is same as the result of have_func(“rb_define_alloc_func”, “ruby.h”).
HAVE_RB_REG_NEW_STR: Means that function rb_reg_new_str() is provided, that creates Regexp object from String object. This is same as the result of have_func(“rb_reg_new_str”, “ruby.h”).
HAVE_RB_IO_T: Means that type rb_io_t is provided.
USE_SYMBOL_AS_METHOD_NAME: Means that Symbols will be returned as method names, e.g., Module#methods, #singleton_methods and so on.
HAVE_RUBY_*_H: Defined in ruby.h and means corresponding header is available. For instance, when HAVE_RUBY_ST_H is defined you should use ruby/st.h not mere st.h.
RB_EVENT_HOOKS_HAVE_CALLBACK_DATA: Means that rb_add_event_hook() takes the third argument ‘data’, to be passed to the given event hook function.

/*

* Local variables:
* fill-column: 70
* end:
*/

Name		Name	Last commit message	Last commit date
Latest commit History 94 Commits
bcc32		bcc32
benchmark		benchmark
bin		bin
bootstraptest		bootstraptest
cygwin		cygwin
debian		debian
defs		defs
doc		doc
enc		enc
ext		ext
include		include
lib		lib
man		man
misc		misc
missing		missing
nacl		nacl
sample		sample
spec		spec
symbian		symbian
template		template
test		test
tool		tool
win32		win32
.document		.document
.editorconfig		.editorconfig
.gdbinit		.gdbinit
.gitignore		.gitignore
.indent.pro		.indent.pro
.revision.time		.revision.time
.travis.yml		.travis.yml
BSDL		BSDL
COPYING		COPYING
COPYING.ja		COPYING.ja
ChangeLog		ChangeLog
GPL		GPL
KNOWNBUGS.rb		KNOWNBUGS.rb
LEGAL		LEGAL
Makefile.in		Makefile.in
NEWS		NEWS
README		README
README.EXT		README.EXT
README.EXT.ja		README.EXT.ja
README.ja		README.ja
addr2line.c		addr2line.c
addr2line.h		addr2line.h
array.c		array.c
bignum.c		bignum.c
class.c		class.c
common.mk		common.mk
compar.c		compar.c
compile.c		compile.c
complex.c		complex.c
configure		configure
configure.in		configure.in
constant.h		constant.h
cont.c		cont.c
debug.c		debug.c
dir.c		dir.c
dln.c		dln.c
dln.h		dln.h
dln_find.c		dln_find.c
dmydln.c		dmydln.c
dmyencoding.c		dmyencoding.c
dmyext.c		dmyext.c
dmyversion.c		dmyversion.c
encdb.h		encdb.h
encoding.c		encoding.c
enum.c		enum.c
enumerator.c		enumerator.c
error.c		error.c
eval.c		eval.c
eval_error.c		eval_error.c
eval_intern.h		eval_intern.h
eval_jump.c		eval_jump.c
file.c		file.c
gc.c		gc.c
gc.h		gc.h
gem_prelude.rb		gem_prelude.rb
golf_prelude.c		golf_prelude.c
golf_prelude.rb		golf_prelude.rb
goruby.c		goruby.c
hash.c		hash.c
ia64.s		ia64.s
id.c		id.c
id.h		id.h
inits.c		inits.c
insns.def		insns.def
insns.inc		insns.inc
insns_info.inc		insns_info.inc
internal.h		internal.h
io.c		io.c
iseq.c		iseq.c
iseq.h		iseq.h
known_errors.inc		known_errors.inc
lex.c		lex.c
lex.c.blt		lex.c.blt
load.c		load.c
main.c		main.c
marshal.c		marshal.c
math.c		math.c

License

Licenses found

tbhi/debian-ruby2.0

Folders and files

Latest commit

History

Repository files navigation

Basic Knowledge¶ ↑

Data-Types¶ ↑

Check Data Type of the VALUE¶ ↑

Convert VALUE into C Data¶ ↑

Convert C Data into VALUE¶ ↑

Manipulating Ruby Data¶ ↑

String Functions¶ ↑

Array Functions¶ ↑

Extending Ruby with C¶ ↑

Adding New Features to Ruby¶ ↑

Class and Module Definition¶ ↑

Method and Singleton Method Definition¶ ↑

Constant Definition¶ ↑

Use Ruby Features from C¶ ↑

Evaluate Ruby Programs in a String¶ ↑

ID or Symbol¶ ↑

Invoke Ruby Method from C¶ ↑

Accessing the Variables and Constants¶ ↑

Information Sharing Between Ruby and C¶ ↑

Ruby Constants That C Can Be Accessed From C¶ ↑

Global Variables Shared Between C and Ruby¶ ↑

Encapsulate C Data into a Ruby Object¶ ↑

Example - Creating dbm Extension¶ ↑

Make the Directory¶ ↑

Design the Library¶ ↑

Write the C Code¶ ↑

Prepare extconf.rb¶ ↑

Prepare Depend (Optional)¶ ↑

Generate Makefile¶ ↑

Run make¶ ↑

Debug¶ ↑

Done! Now You Have the Extension Library¶ ↑

Appendix A. Ruby Source Files Overview¶ ↑

Ruby Language Core¶ ↑

Ruby Syntax Parser¶ ↑

Ruby Evaluator (a.k.a. YARV)¶ ↑

Regular Expression Engine (Oniguruma)¶ ↑

Utility Functions¶ ↑

Ruby Interpreter Implementation¶ ↑

Class Library¶ ↑

Multilingualization¶ ↑

goruby Interpreter Implementation¶ ↑

Appendix B. Ruby Extension API Reference¶ ↑

Types¶ ↑

Variables and Constants¶ ↑

C Pointer Wrapping¶ ↑

Checking Data Types¶ ↑

Data Type Conversion¶ ↑

Defining Class and Module¶ ↑

Defining Global Variables¶ ↑

Constant Definition¶ ↑

Method Definition¶ ↑

Invoking Ruby method¶ ↑

Instance Variables¶ ↑

Control Structure¶ ↑

Exceptions and Errors¶ ↑

Initialize and Start the Interpreter¶ ↑

Hooks for the Interpreter Events¶ ↑

Macros for Compatibility¶ ↑

About

Resources

License

Licenses found

Stars

Watchers

Forks

Releases

Packages 0

Contributors 2

Languages

Packages