Repository navigation
docs(quickstart): ドキュメントを簡潔化して分かりやすく改善 - #139
Conversation
- 前提条件を表形式で整理し、AWS CLI を追加 - 5ステップから3ステップに簡略化 - 認証スキップモードをデフォルトとして推奨 - Auth0 設定手順を折りたたみ（details）に移動 - 存在しないコマンド（localstack-up/down）を削除 - トラブルシューティングを表形式で整理 - 不要な説明を削除して読みやすく 🤖 Generated with [Claude Code](https://claude.com/claude-code) Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
📝 WalkthroughWalkthroughThis pull request restructures the QUICKSTART.md documentation to simplify local development onboarding. It replaces Auth0-centric setup steps with an optional Changes
Estimated code review effort🎯 2 (Simple) | ⏱️ ~10 minutes Possibly related PRs
Poem
Pre-merge checks✅ Passed checks (3 passed)
Thanks for using CodeRabbit! It's free for OSS, and your support helps us grow. If you like it, consider giving us a shout-out. Comment |
PR Review: QUICKSTART.md 簡潔化✅ 総合評価ドキュメントの改善として非常に良い変更です。認証スキップモードを前面に出し、初学者の体験を大幅に改善しています。 🎯 良い点1. ユーザー体験の大幅改善
2. 視認性の向上
3. 正確性の向上
📝 軽微な改善提案1. 前提条件の Git の欠落現在の変更で Git が前提条件テーブルから削除されていますが、 | Git | バージョン管理 | `brew install git` |2. AWS CLI の用途説明の明確化「LocalStack 操作」よりも「LocalStack テスト・操作」の方が、 3. make dev の説明
推奨修正: | `make dev` | フロントエンド開発サーバーを起動 |4. トラブルシューティングのポート確認コマンド
5. セキュリティ注意事項セクションの削除元のドキュメントにあった「セキュリティ注意事項」セクションが削除されていますが、以下の点は重要なので、簡潔版として残すことを推奨します: ## 🔒 注意事項
- `.env.local` と `terraform.tfvars` は Git にコミットしない（`.gitignore` で除外済み）
- 本番環境では Auth0 を必ず設定する🔒 セキュリティ問題なし。ドキュメントのみの変更で、認証スキップモードは開発用であることが明記されています。 🧪 テストカバレッジドキュメントのみの変更のため、テストは不要です。ただし、Test plan の確認項目は適切です:
📊 パフォーマンス影響なし。 🎨 コードスタイル
💡 提案: 次のステップこの簡潔化の流れで、以下も検討すると良いかもしれません（本PR外）:
✅ 結論LGTM (Looks Good To Me) - マージして問題ありません 🎉 軽微な改善提案（特に Git の追加、セキュリティ注意事項の簡潔版）は検討の価値がありますが、現状でも十分に価値のある改善です。 🤖 Generated with Claude Code |
![coderabbitai[bot]](https://avatars.githubusercontent.com/in/347564?s=60&v=4){kind=small}
There was a problem hiding this comment.
Actionable comments posted: 2
🧹 Nitpick comments (2)
docs/QUICKSTART.md (2)
9-14: Prerequisites table is well-structured; ensure macOS-specific commands are platform-agnostic.The table clearly lists required tools with installation commands using Homebrew. Consider adding a note that these commands are macOS-specific, or provide equivalent commands for Linux/Windows users, since not all developers may use Homebrew.
Example clarification:
| Bun | パッケージ管理・ランタイム | `brew install oven-sh/bun/bun` | +| Bun | パッケージ管理・ランタイム | [公式インストール](https://bun.sh/docs/installation) |Alternatively, add a note above the table: "以下のコマンドは macOS Homebrew 用です。他の OS については公式ドキュメントを参照してください。"
46-46: Clarify mock user behavior inAUTH_SKIP=1mode.The statement "モックユーザーで自動ログインします" (automatic login with mock user) could be clearer. Consider specifying:
- What permissions/roles does the mock user have?
- Can developers switch between mock users or is there only one?
- Is the mock user suitable for all development scenarios?
📜 Review details
Configuration used: defaults
Review profile: CHILL
Plan: Pro
📒 Files selected for processing (1)
docs/QUICKSTART.md
🧰 Additional context used
🪛 LanguageTool
docs/QUICKSTART.md
[typographical] ~87-~87: ２つの連続するコンマ
Context: ...与して Authorize: - read:clients, create:clients, update:clients, delete:clients ...
(DOUBLE_PUNCTUATION)
[typographical] ~88-~88: ２つの連続するコンマ
Context: ...:clients -read:resource_servers, create:resource_servers, update:resourc...
(DOUBLE_PUNCTUATION)
🪛 markdownlint-cli2 (0.18.1)
docs/QUICKSTART.md
57-57: Bare URL used
(MD034, no-bare-urls)
58-58: Bare URL used
(MD034, no-bare-urls)
59-59: Bare URL used
(MD034, no-bare-urls)
⏰ Context from checks skipped due to timeout of 90000ms. You can increase the timeout in your CodeRabbit configuration to a maximum of 15 minutes (900000ms). (1)
- GitHub Check: claude-review
🔇 Additional comments (5)
docs/QUICKSTART.md (5)
30-43: Verify thatAUTH_URLvalues match the actual application ports.The environment files set
AUTH_URLfor both apps (Control Plane:3000, Application Plane:3001). Confirm these URLs are correct for the respective services and match howAUTH_SKIP=1mode uses them internally.Please verify that:
AUTH_URL=http://localhost:3000is the correct callback/return URL for the Control PlaneAUTH_URL=http://localhost:3001is the correct callback/return URL for the Application Plane
61-72: Makefile commands table is clear; verify all commands exist and are functional.The table is well-organized and provides a good reference. Before release, confirm that all listed commands (
make start,make stop,make restart,make status,make dev,make test,make before-commit,make help) are implemented and functional in the Makefile.Please verify that all 8 Makefile commands listed are implemented and working as documented.
74-105: Auth0 optional section structure is good; verify Terraform command exists.The reorganization of Auth0 setup into an optional
<details>section is an improvement. However, verify that themake auth0-setupcommand (line 100) exists and is documented. Also, confirm thatmake auth0-output(referenced in line 143) is available for retrieving credentials.Please verify:
- Does the
make auth0-setupcommand exist in the Makefile?- Does the
make auth0-outputcommand exist and is it used to retrieve Auth0 credentials?
134-135: Command sequence for LocalStack restart is clear.The suggestion to use
make stop && make startfor restarting LocalStack is appropriate and well-integrated into the troubleshooting flow.
138-144: Auth0 troubleshooting table is conditional; consider adding a note about when it applies.The troubleshooting section for Auth0 errors is helpful but only applies when Auth0 is configured. The header on line 138 clarifies "Auth0 を使用する場合のみ" (only when using Auth0), which is good. However, ensure the error solutions reference the correct configuration steps in the collapsible Auth0 section above.
Verify that:
- The redirect URI in the Auth0 error row matches the Auth0 setup in the
<details>section- The
AUTH0_CLIENT_SECRETreference (line 143) is accurate given the new AUTH_SKIP mode- The
make auth0-outputcommand provides the necessary credential recovery
| - **Control Plane**: http://localhost:3000 | ||
| - **Application Plane**: http://localhost:3001 | ||
| - **LocalStack**: http://localhost:4566 |
There was a problem hiding this comment.
Wrap bare URLs in Markdown link syntax to comply with MD034.
Bare URLs should be formatted as links for proper Markdown rendering and accessibility.
🔎 Proposed fix for bare URLs
- **Control Plane**: http://localhost:3000
+ **Control Plane**: [http://localhost:3000](http://localhost:3000)
- **Application Plane**: http://localhost:3001
+ **Application Plane**: [http://localhost:3001](http://localhost:3001)
- **LocalStack**: http://localhost:4566
+ **LocalStack**: [http://localhost:4566](http://localhost:4566)🧰 Tools
🪛 markdownlint-cli2 (0.18.1)
57-57: Bare URL used
(MD034, no-bare-urls)
58-58: Bare URL used
(MD034, no-bare-urls)
59-59: Bare URL used
(MD034, no-bare-urls)
🤖 Prompt for AI Agents
In docs/QUICKSTART.md around lines 57 to 59 the three bare URLs are flagged by
MD034; replace each bare URL with Markdown link syntax (e.g. [Control
Plane](http://localhost:3000), [Application Plane](http://localhost:3001),
[LocalStack](http://localhost:4566)) so they are proper links and accessible,
preserving the same labels and URLs.
| - `read:clients`, `create:clients`, `update:clients`, `delete:clients` | ||
| - `read:resource_servers`, `create:resource_servers`, `update:resource_servers` |
There was a problem hiding this comment.
Fix double comma typographical errors (LanguageTool violations).
Static analysis detected double consecutive commas on lines 87–88. These appear to be formatting issues in the permission lists.
🔎 Proposed fix for double commas
- `read:clients`, `create:clients`, `update:clients`, `delete:clients`
- - `read:resource_servers`, `create:resource_servers`, `update:resource_servers`
+ - `read:resource_servers`, `create:resource_servers`, `update:resource_servers`
- `read:client_credentials`, `create:client_credentials`(Note: Review the exact formatting in the original markdown to ensure commas are single, not double.)
Committable suggestion skipped: line range outside the PR's diff.
🧰 Tools
🪛 LanguageTool
[typographical] ~87-~87: ２つの連続するコンマ
Context: ...与して Authorize: - read:clients, create:clients, update:clients, delete:clients ...
(DOUBLE_PUNCTUATION)
[typographical] ~88-~88: ２つの連続するコンマ
Context: ...:clients -read:resource_servers, create:resource_servers, update:resourc...
(DOUBLE_PUNCTUATION)
🤖 Prompt for AI Agents
In docs/QUICKSTART.md around lines 87 to 88 there are double consecutive commas
in the permission lists (typo/formatting issue); remove the extra commas so each
permission is separated by a single comma, ensure backtick-wrapped permissions
remain intact, and eliminate any trailing duplicate commas — then preview
markdown or run a linter to confirm no remaining double commas.
1 participant
Summary
<details>で折りたたみ表示に変更Test plan
make startでローカル環境が正常に起動することを確認🤖 Generated with Claude Code
Summary by CodeRabbit
Release Notes
✏️ Tip: You can customize this high-level summary in your review settings.