feat: kurtosis check running script

.dockerignore

@@ -0,0 +1,9 @@
+# Copyright (c) 2024 Status Research & Development GmbH
+# Licensed under either of
+#  * Apache License, version 2.0, ([LICENSE-APACHE](LICENSE-APACHE) or
+#    http://www.apache.org/licenses/LICENSE-2.0)
+#  * MIT license ([LICENSE-MIT](LICENSE-MIT) or
+#    http://opensource.org/licenses/MIT)
+# at your option. This file may not be copied, modified, or distributed except
+# according to those terms.
+vendor/*

Dockerfile

@@ -0,0 +1,49 @@
+# Copyright (c) 2024 Status Research & Development GmbH
+# Licensed under either of
+#  * Apache License, version 2.0, ([LICENSE-APACHE](LICENSE-APACHE) or
+#    http://www.apache.org/licenses/LICENSE-2.0)
+#  * MIT license ([LICENSE-MIT](LICENSE-MIT) or
+#    http://opensource.org/licenses/MIT)
+# at your option. This file may not be copied, modified, or distributed except
+# according to those terms.
+
+FROM debian:testing-slim AS build
+
+SHELL ["/bin/bash", "-c"]
+
+RUN apt-get clean && apt update \
+ && apt -y install build-essential git-lfs
+
+RUN ldd --version ldd
+
+ADD . /root/nimbus-eth2
+
+RUN cd /root/nimbus-eth2 \
+ && make -j$(nproc) update \
+ && make -j$(nproc) V=1 NIMFLAGS="-d:const_preset=mainnet -d:disableMarchNative" LOG_LEVEL=TRACE nimbus_beacon_node
+
+
+# --------------------------------- #
+# Starting new image to reduce size #
+# --------------------------------- #
+FROM debian:testing-slim as deploy
+
+SHELL ["/bin/bash", "-c"]
+RUN apt-get clean && apt update \
+ && apt -y install build-essential
+RUN apt update && apt -y upgrade
+
+RUN ldd --version ldd
+
+RUN rm -rf /home/user/nimbus-eth2/build/beacon_node
+RUN rm -rf /home/user/nimbus-eth2/build/nimbus_beacon_node
+
+# "COPY" creates new image layers, so we cram all we can into one command
+COPY --from=build /root/nimbus-eth2/build/nimbus_beacon_node /home/user/nimbus-eth2/build/beacon_node
+COPY --from=build /root/nimbus-eth2/build/nimbus_beacon_node /home/user/nimbus-eth2/build/nimbus_beacon_node
+
+ENV PATH="/home/user/nimbus-eth2/build:${PATH}"
+ENTRYPOINT ["nimbus_beacon_node"]
+WORKDIR /home/user/nimbus-eth2/build
+
+STOPSIGNAL SIGINT

kurtosis-network-params.yml

@@ -0,0 +1,31 @@
+# Copyright (c) 2024 Status Research & Development GmbH
+# Licensed under either of
+#  * Apache License, version 2.0, ([LICENSE-APACHE](LICENSE-APACHE) or
+#    http://www.apache.org/licenses/LICENSE-2.0)
+#  * MIT license ([LICENSE-MIT](LICENSE-MIT) or
+#    http://opensource.org/licenses/MIT)
+# at your option. This file may not be copied, modified, or distributed except
+# according to those terms.
+
+participants_matrix:
+  el:
+    - el_type: geth
+    - el_type: nethermind
+    - el_type: erigon
+  cl:
+    - cl_type: nimbus
+      cl_image: <image-placeholder>
+    - cl_type: lighthouse
+    - cl_type: prysm
+additional_services:
+  - tx_spammer
+  - assertoor
+  - beacon_metrics_gazer
+mev_type: null
+assertoor_params:
+  image: "ethpandaops/assertoor:master"
+  run_stability_check: true
+  run_block_proposal_check: true
+  run_transaction_test: true
+  run_blob_transaction_test: true
+  run_opcodes_transaction_test: true

run-kurtosis-check.sh

@@ -0,0 +1,256 @@
+#!/bin/bash
+
+# Copyright (c) 2024 Status Research & Development GmbH
+# Licensed under either of
+#  * Apache License, version 2.0, ([LICENSE-APACHE](LICENSE-APACHE) or
+#    http://www.apache.org/licenses/LICENSE-2.0)
+#  * MIT license ([LICENSE-MIT](LICENSE-MIT) or
+#    http://opensource.org/licenses/MIT)
+# at your option. This file may not be copied, modified, or distributed except
+# according to those terms.
+
+# ------------------------------------------------
+#          Inputs on how to run checks
+# ------------------------------------------------
+echo
+printf "Do you want to run the checks in terminal or visit the assertoor URL? (terminal/url) "
+read reply
+
+echo
+printf "Build new changes (yes/no)? "
+read use_previous_image
+
+echo
+printf "Do you want to use custom kurtosis network parameters? (no/path_to_file) "
+read custom_kurtosis
+
+# ------------------------------------------------
+#             Installation Checks
+# ------------------------------------------------
+
+# Checking for docker installation
+echo "Checking docker installation"
+if command -v docker &> /dev/null; then
+  echo "Docker installation found"
+else
+  echo "Docker installation not found. Please install docker."
+  exit 1
+fi
+
+echo "Checking kurtosis installation"
+if command -v kurtosis &> /dev/null; then
+  echo "Kurtosis installation found"
+else
+  echo "Kurtosis installation not found. Installing kurtosis"
+  echo "deb [trusted=yes] https://apt.fury.io/kurtosis-tech/ /" | sudo tee /etc/apt/sources.list.d/kurtosis.list
+  sudo apt-get update
+  sudo apt-get install -y kurtosis
+fi
+
+# Install jq if not installed already
+if [ "$(which jq)" != "" ]; 
+then
+  echo "jq is already installed"
+else
+  echo "jq is not installed. Installing jq"
+  sudo apt-get install -y jq
+fi
+
+new_cl_image="localtestnet"
+
+# ------------------------------------------------
+#            Build the Docker Image
+# ------------------------------------------------
+if [[ "$use_previous_image" == "no" ]]; then
+  echo "Using the previously built docker image"
+  echo
+  echo -n "Please enter the docker image name (default: localtestnet) "
+  read -r cl_image
+  if [[ "$cl_image" == "" ]]; then
+    new_cl_image="localtestnet"
+  else
+    new_cl_image=$cl_image
+  fi
+else
+  echo "Starting the Docker Build!"
+  # Build the docker Image
+  sudo docker build . -t localtestnet
+  # The new el_image value
+  new_cl_image="localtestnet"
+fi
+
+
+# ------------------------------------------------
+#             Run the Kurtosis Tests
+# ------------------------------------------------
+
+# Use sed to replace the el_image value in the file
+cat kurtosis-network-params.yml | envsubst > assertoor.yaml
+sed -i "s/cl_image: .*/cl_image: $new_cl_image/" assertoor.yaml
+
+sudo kurtosis run \
+  --enclave nimbus-localtestnet \
+  github.com/ethpandaops/ethereum-package \
+  --args-file assertoor.yaml
+
+enclave_dump=$(kurtosis enclave inspect nimbus-localtestnet)
+assertoor_url=$(echo "$enclave_dump" | grep assertoor | grep http | sed 's/.*\(http:\/\/[0-9.:]\+\).*/\1/')
+
+# ------------------------------------------------
+#               Remove Generated File
+# ------------------------------------------------
+rm assertoor.yaml
+
+# Check the user's input and respond accordingly
+if [[ "$reply" == "url" ]]; then
+  echo "You chose to visit the assertoor URL."
+  echo "Assertoor Checks Please Visit -> ${assertoor_url}"
+  echo "Please visit the URL to check the status of the tests"
+  echo "The kurtosis enclave needs to be cleared, after the tests are done. Please run the following command ----- sudo kurtosis enclave rm -f nimbus-localtestnet"
+else
+  echo "Running the checks over terminal"
+
+
+  # ------------------------------------------------
+  #              Check for Test Status
+  # ------------------------------------------------
+  YELLOW='\033[1;33m'
+  GRAY='\033[0;37m'
+  GREEN='\033[0;32m'
+  RED='\033[0;31m'
+  NC='\033[0m'
+
+  # print assertor logs
+  assertoor_container=$(docker container list | grep assertoor | sed 's/^\([^ ]\+\) .*$/\1/')
+  docker logs -f "$assertoor_container" &
+
+  # helper to fetch task status for specific test id
+  get_tasks_status() {
+    tasks=$(curl -s "${assertoor_url}"/api/v1/test_run/"$1" | jq -c ".data.tasks[] | {index, parent_index, name, title, status, result}")
+    declare -A task_graph_map
+    task_graph_map[0]=""
+
+    while read task; do
+      task_id=$(echo "$task" | jq -r ".index")
+      task_parent=$(echo "$task" | jq -r ".parent_index")
+      task_name=$(echo "$task" | jq -r ".name")
+      task_title=$(echo "$task" | jq -r ".title")
+      task_status=$(echo "$task" | jq -r ".status")
+      task_result=$(echo "$task" | jq -r ".result")
+
+      task_graph="${task_graph_map[$task_parent]}"
+      task_graph_map[$task_id]="$task_graph |"
+      if [ ! -z "$task_graph" ]; then
+        task_graph="${task_graph}- "
+      fi
+
+      if [ "$task_status" == "pending" ]; then
+        task_status="${GRAY}pending ${NC}"
+      elif [ "$task_status" == "running" ]; then
+        task_status="${YELLOW}running ${NC}"
+      elif [ "$task_status" == "complete" ]; then
+        task_status="${GREEN}complete${NC}"
+      fi
+
+      if [ "$task_result" == "none" ]; then
+        task_result="${GRAY}none   ${NC}"
+      elif [ "$task_result" == "success" ]; then
+        task_result="${GREEN}success${NC}"
+      elif [ "$task_result" == "failure" ]; then
+        task_result="${RED}failure${NC}"
+      fi
+
+      echo -e " $(printf '%-4s' "$task_id")\t$task_status\t$task_result\t$(printf '%-50s' "$task_graph$task_name") \t$task_title"
+    done <<< $(echo "$tasks")
+  }
+
+  # poll & check test status
+  final_test_result=""
+  failed_test_id=""
+  while true
+  do
+    pending_tests=0
+    failed_tests=0
+    total_tests=0
+    running_test=""
+
+    status_lines=()
+    task_lines=""
+    status_lines+=("$(date +'%Y-%m-%d %H:%M:%S')  Test Status:")
+
+    tests=$(curl -s "${assertoor_url}"/api/v1/test_runs | jq -c ".data[] | {run_id, test_id, name, status}")
+    while read test; do
+      if [ -z "$test" ]; then
+        continue
+      fi
+      run_id=$(echo "$test" | jq -r ".run_id")
+      test_id=$(echo "$test" | jq -r ".test_id")
+      test_name=$(echo "$test" | jq -r ".name")
+      test_status=$(echo "$test" | jq -r ".status")
+
+      if [ "$test_status" == "pending" ]; then
+        pending_tests=$(expr $pending_tests + 1)
+        status_name="${GRAY}pending${NC}"
+      elif [ "$test_status" == "running" ]; then
+        pending_tests=$(expr $pending_tests + 1)
+        running_test="$run_id"
+        status_name="${YELLOW}running${NC}"
+
+      elif [ "$test_status" == "success" ]; then
+        status_name="${GREEN}success${NC}"
+      elif [ "$test_status" == "failure" ]; then
+        failed_tests=$(expr $failed_tests + 1)
+        failed_test_id="$run_id"
+        status_name="${RED}failure${NC}"
+      else
+        status_name="$test_status"
+      fi
+      status_lines+=("  $(printf '%-3s' "$test_id") $status_name \t$test_name")
+      total_tests=$(expr $total_tests + 1)
+    done <<< $(echo "$tests")
+
+    for status_line in "${status_lines[@]}"
+    do
+      echo -e "$status_line"
+    done
+
+    if ! [ -z "$running_test" ]; then
+      task_lines=$(get_tasks_status "$running_test")
+      echo "Active Test Task Status:"
+      echo "$task_lines"
+    fi
+
+    if [ "$failed_tests" -gt 0 ]; then 
+      final_test_result="failure"
+      break
+    fi
+    if [ "$total_tests" -gt 0 ] && [ "$pending_tests" -le 0 ]; then
+      final_test_result="success"
+      break
+    fi
+
+    sleep 60
+  done
+
+  # save test results & status to github output
+  echo "test_result=$(echo "$final_test_result")"
+  echo "test_status"
+  for status_line in "${status_lines[@]}"
+  do
+    echo -e "$status_line"
+  done
+  echo
+
+  if ! [ -z "$failed_test_id" ]; then
+    echo "failed_test_status"
+    get_tasks_status "$failed_test_id"
+    echo ""
+  else
+    echo "failed_test_status="
+  fi
+
+  # ------------------------------------------------
+  #                   Cleanup
+  # ------------------------------------------------
+  sudo kurtosis enclave rm -f nimbus-localtestnet
+fi