GitHub - sivu/sjfw: 3D Printer Firmware

Branches Tags

Name		Name	Last commit message	Last commit date
Latest commit History 206 Commits
avr		avr
gen4		gen4
gen6		gen6
generic		generic
lib_sd		lib_sd
ramps12		ramps12
ramps13		ramps13
repg		repg
temperature		temperature
triffid		triffid
util		util
.gitignore		.gitignore
Axis.cpp		Axis.cpp
Axis.h		Axis.h
Eeprom.cpp		Eeprom.cpp
Eeprom.h		Eeprom.h
GCode.cpp		GCode.cpp
GCode.h		GCode.h
GcodeQueue.cpp		GcodeQueue.cpp
GcodeQueue.h		GcodeQueue.h
Globals.cpp		Globals.cpp
Globals.h		Globals.h
Host.cpp		Host.cpp
Host.h		Host.h
Keypad.h		Keypad.h
LCDKeypad.cpp		LCDKeypad.cpp
LCDKeypad.h		LCDKeypad.h
LiquidCrystal.h		LiquidCrystal.h
Makefile		Makefile
Marlin.cpp		Marlin.cpp
Marlin.h		Marlin.h
Motion.cpp		Motion.cpp
Motion.h		Motion.h
Point.h		Point.h
README		README
RingBuffer.h		RingBuffer.h
SDCard.cpp		SDCard.cpp
SDCard.h		SDCard.h
Temperature.cpp		Temperature.cpp
Temperature.h		Temperature.h
Time.cpp		Time.cpp
Time.h		Time.h
config-common.h		config-common.h
main.cpp		main.cpp
speed_lookuptable.h		speed_lookuptable.h

Repository files navigation

ScribbleJ Firmware
(c) 2011 Christopher "ScribbleJ" Jansen
http://reprap.org/wiki/Sjfw

This is a firmware for modern 3D printers with an advanced gcode pipeline.

* Run-time configuration of all settings.
* Advanced preparsing gcode pipeline.
* Acceleration and lookahead.
* "Dimension" - 5D/Volumetric, buzzword buzzword.
* LCD and Operator Control Panel.
* Hostless printing from SD Card.


This firmware includes some portions which are copped directly from the MBI firmware, and some code that is based on
code in the Sprinter and Teacup firmwares, and one large option taken from Marlin firmware.

THIS COMES WITH NO WARRANTIES, GUARANTEES, PROMISES, OR CAKE.  I do not recommend that you, or anyone, uses this firmware.
If you do, you do so at your own risk.

I appreciate any bug reports, patches, and amusing stories about how this firmware burned your house down.  You can find
me on Freenode IRC, channel #reprap.  Or email at [email protected].


VERY IMPORTANT!!!!!!!!!
Please see http://reprap.org/wiki/Sjfw for lastest full documentation.