feat: set fixed IP address example

examples/Settings/SetFixedIPAddress/SetFixedIPAddress.ino

@@ -0,0 +1,117 @@
+/*
+ * Example for how to use SinricPro Settings:
+ *
+ * If you encounter any issues:
+ * - check the readme.md at https://github.com/sinricpro/esp8266-esp32-sdk/blob/master/README.md
+ * - ensure all dependent libraries are installed
+ *   - see https://github.com/sinricpro/esp8266-esp32-sdk/blob/master/README.md#arduinoide
+ *   - see https://github.com/sinricpro/esp8266-esp32-sdk/blob/master/README.md#dependencies
+ * - open serial monitor and check whats happening
+ * - check full user documentation at https://sinricpro.github.io/esp8266-esp32-sdk
+ * - visit https://github.com/sinricpro/esp8266-esp32-sdk/issues and check for existing issues or open a new one
+ */
+
+// Uncomment the following line to enable serial debug output
+// #define ENABLE_DEBUG
+
+#ifdef ENABLE_DEBUG
+#define DEBUG_ESP_PORT Serial
+#define NODEBUG_WEBSOCKETS
+#define NDEBUG
+#endif
+
+#include <Arduino.h>
+#if defined(ESP8266)
+#include <ESP8266WiFi.h>
+#elif defined(ESP32) || defined(ARDUINO_ARCH_RP2040)
+#include <WiFi.h>
+#endif
+
+#include "SinricPro.h"
+#include "SinricProSwitch.h"
+#include "ArduinoJson.h"
+
+#define WIFI_SSID ""
+#define WIFI_PASS ""
+#define APP_KEY ""     // Should look like "de0bxxxx-1x3x-4x3x-ax2x-5dabxxxxxxxx"
+#define APP_SECRET ""  // Should look like "5f36xxxx-x3x7-4x3x-xexe-e86724a9xxxx-4c4axxxx-3x3x-x5xe-x9x3-333d65xxxxxx"
+#define SWITCH_ID ""   // Should look like "5dc1564130xxxxxxxxxxxxxx"
+
+#define BAUD_RATE 115200  // Change baudrate to your need
+
+#define SET_FIXED_IP_ADDRESS "pro.sinric::set.fixed.ip.address"
+
+bool onSetModuleSetting(const String &id, const String &value) {
+  // Handle module settings.
+  JsonDocument doc;
+  DeserializationError error = deserializeJson(doc, value);
+
+  if (error) {
+    Serial.print(F("onSetModuleSetting::deserializeJson() failed: "));
+    Serial.println(error.f_str());
+    return false;
+  }
+
+  if (id == SET_FIXED_IP_ADDRESS) {
+    String localIP = doc["localIP"];
+    String gateway = doc["gateway"];
+    String subnet = doc["subnet"];
+    String dns1 = doc["dns1"] | "";
+    String dns2 = doc["dns2"] | "";
+
+    // Change your WiFi config here.
+    Serial.printf("localIP:%s, gateway:%s, subnet:%s, dns1:%s, dns2:%s   \r\n", localIP.c_str(), gateway.c_str(), subnet.c_str(), dns1.c_str(), dns2.c_str());
+    return true;
+  } else {
+    return false;
+  }
+}
+
+// setup function for WiFi connection
+void setupWiFi() {
+  Serial.printf("\r\n[Wifi]: Connecting");
+
+#if defined(ESP8266)
+  WiFi.setSleepMode(WIFI_NONE_SLEEP);
+  WiFi.setAutoReconnect(true);
+#elif defined(ESP32)
+  WiFi.setSleep(false);
+  WiFi.setAutoReconnect(true);
+#endif
+
+  WiFi.begin(WIFI_SSID, WIFI_PASS);
+
+  while (WiFi.status() != WL_CONNECTED) {
+    Serial.printf(".");
+    delay(250);
+  }
+  Serial.printf("connected!\r\n[WiFi]: IP-Address is %s\r\n", WiFi.localIP().toString().c_str());
+}
+
+// setup function for SinricPro
+void setupSinricPro() {
+  SinricProSwitch &mySwitch = SinricPro[SWITCH_ID];
+
+  // setup SinricPro
+  SinricPro.onConnected([]() {
+    Serial.printf("Connected to SinricPro\r\n");
+  });
+  SinricPro.onDisconnected([]() {
+    Serial.printf("Disconnected from SinricPro\r\n");
+  });
+
+  SinricPro.onSetSetting(onSetModuleSetting);
+  SinricPro.begin(APP_KEY, APP_SECRET);
+}
+
+// main setup function
+void setup() {
+  Serial.begin(BAUD_RATE);
+  Serial.printf("\r\n\r\n");
+  setupWiFi();
+  setupSinricPro();
+}
+
+void loop() {
+  SinricPro.handle();
+}