Custom firmware for the Toniebox WIP
Currently building only works with Windows. Linux doesn't work on a x64 only system. You should prepare the toniebox with the sd bootloader to load the cfw from your sd card.
Please install the latest Energia release (1.8.10E23 tested).
In addition you need to install the cc3200 board library.
Replace the cc3200 board library files with the toniebox-cc3200-core and restart energia.
Open hackiebox_cfw.ino with energia and build the cfw. Remember the path where the hackiebox.ino.bin is saved. Usally you find it at C:\Users\<User>\AppData\Local\Temp\arduino_build_XXXXXX.
It is recommended to have a second copy of the cfw to be able to load the working image and update a broken cfw image over your backup cfw.
First of all you need to create "/revvox/web" on your sd card (subdir revvox should be already there if you have successfully installed the sd bootloader) and copy over the content of the /web/ directory of this repository. In addition you have to copy your cfw image to your selected slot(s) on the sd card. (ex. "/revvox/boot/pre-img1.bin")
Reinsert the sd card and run the cfw once. Then shutdown the box again (put the box onto the front where the speaker/tonie logo is and press both ears for 10s). Then remove the sd card again and add your wifi credentials to the created "/revvox/hackiebox.config.json" config file.
To update the firmware ota you can just use the hackiebox website und the box' ip address. (Expert->File Upload).
Keep in mind that connecting the RX Pin of the box to a serial interface blocks the big ear. For reading the log messages it is enough to have the TX Pin only connected (beside GND). Trello Hackiebox Dev Board