-
Notifications
You must be signed in to change notification settings - Fork 12.5k
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Rollup of 11 pull requests #79167
Rollup of 11 pull requests #79167
Conversation
This PR both adds in-source documentation on what to look out for when adding a new (X86) feature set and adds all that are detectable at run-time in Rust stable as of 1.27.0. This should only enable the use of the corresponding LLVM intrinsics. Actual intrinsics need to be added separately in rust-lang/stdarch. It also re-orders the run-time-detect test statements to be more consistent with the actual list of intrinsics whitelisted and removes underscores not present in the actual names (which might be mistaken as being part of the name)
`movbe` seems to not be a run-time detectable feature on x86. It has thus been removed from the list. It was only commented out to ease comparison against the full list.
…M 9 exclusive features Updated the added documentation in llvm_util.rs to note which copies of LLVM need to be inspected. Removed avx512bf16 and avx512vp2intersect because they are unsupported before LLVM 9 with the build with external LLVM 8 being supported Re-introduced detection testing previously removed for un-requestable features tsc and mmx
With rust-lang#78848 merged, the minimum supported LLVM version is now 9 which means we can actually use the target features introduced in LLVM 9
We'll try to use a weak `getrandom` symbol first, because that allows things like `LD_PRELOAD` interposition. For example, perf measurements might want to disable randomness to get reproducible results. If the weak symbol is not found, we fall back to a raw `SYS_getrandom` call.
Historically the stable tarballs were named after the version number of the specific tool, instead of the version number of Rust. For example, both of the following tarballs were part of the same release: rustc-1.48.0-x86_64-unknown-linux-gnu.tar.xz cargo-0.49.0-x86_64-unknown-linux-gnu.tar.xz PR rust-lang#77336 changed the dist code to instead use Rust's version number for all the tarballs, regardless of the tool they contain: rustc-1.48.0-x86_64-unknown-linux-gnu.tar.xz cargo-1.48.0-x86_64-unknown-linux-gnu.tar.xz Because of that there is no need anymore to have a separate `cargo` field in src/stage0.txt, as the Cargo version will always be the same as the rustc version. This PR removes the field, simplifying the code and the maintenance work required while producing releases.
This should make Clippy more resilient and will unblock rust-lang#78343. This PR is made against rust-lang/rust to avoid the need for a subtree sync at @flip1995's suggestion in rust-lang/rust-clippy#6310.
These referred to a “`Write`er”—extra *e*. Presumably a copy-paste holdover from “`Read`er”. Test Plan: Running ``git grep '`\?[Ww]rite`\?er'`` no longer finds any results. wchargin-branch: io-write-docs
Updated the list of white-listed target features for x86 This PR both adds in-source documentation on what to look out for when adding a new (X86) feature set and [adds all that are detectable at run-time in Rust stable as of 1.27.0](https://github.com/rust-lang/stdarch/blob/master/crates/std_detect/src/detect/arch/x86.rs). This should only enable the use of the corresponding LLVM intrinsics. Actual intrinsics need to be added separately in rust-lang/stdarch. It also re-orders the run-time-detect test statements to be more consistent with the actual list of intrinsics whitelisted and removes underscores not present in the actual names (which might be mistaken as being part of the name) The reference for LLVM's feature names used is [this file](https://github.com/llvm/llvm-project/blob/master/llvm/include/llvm/Support/X86TargetParser.def). This PR was motivated as the compiler end's part for allowing rust-lang#67329 to be adressed over on rust-lang/stdarch
linux: try to use libc getrandom to allow interposition We'll try to use a weak `getrandom` symbol first, because that allows things like `LD_PRELOAD` interposition. For example, perf measurements might want to disable randomness to get reproducible results. If the weak symbol is not found, we fall back to a raw `SYS_getrandom` call.
stability: More precise location for deprecation lint on macros One missing piece of rust-lang#73178.
Tighten the bounds on atomic Ordering in std::sys::unix::weak::Weak This moves reading this from multiple SeqCst reads to Relaxed read + Acquire fence if we are actually going to use the data. Would love to avoid the Acquire fence, but doing so would need Ordering::Consume, which neither Rust, nor LLVM supports (a shame, since this fence is hardly free on ARM, which is what I was hoping to improve). r? ``@Amanieu`` (Sorry for always picking you, but I know a lot of people wouldn't feel comfortable reviewing atomic ordering changes)
…sper Turn top-level comments into module docs in MIR visitor
…eros, r=m-ou-se add trailing_zeros and leading_zeros to non zero types as a way towards being able to use the optimized intrinsics ctlz_nonzero and cttz_nonzero from stable. have not crated any tracking issue if this is not a solution that is wanted
Enable AVX512 *epi64 variants by updating stdarch
…k-Simulacrum bootstrap: use the same version number for rustc and cargo Historically the stable tarballs were named after the version number ofthe specific tool, instead of the version number of Rust. For example, both of the following tarballs were part of the same release: rustc-1.48.0-x86_64-unknown-linux-gnu.tar.xz cargo-0.49.0-x86_64-unknown-linux-gnu.tar.xz PR rust-lang#77336 changed the dist code to instead use Rust's version number for all the tarballs, regardless of the tool they contain: rustc-1.48.0-x86_64-unknown-linux-gnu.tar.xz cargo-1.48.0-x86_64-unknown-linux-gnu.tar.xz Because of that there is no need anymore to have a separate `cargo` field in `src/stage0.txt`, as the Cargo version will always be the same as the rustc version. This PR removes the field, simplifying the code and the maintenance work required while producing releases. r? ``@Mark-Simulacrum``
Fix handling of panic calls This should make Clippy more resilient and will unblock rust-lang#78343. This PR is made against rust-lang/rust to avoid the need for a subtree sync at ``@flip1995's`` suggestion in rust-lang/rust-clippy#6310. r? ``@flip1995`` cc ``@m-ou-se``
…jyn514 Fix typo in `std::io::Write` docs These referred to a “`Write`er”—extra *e*. Presumably a copy-paste holdover from “`Read`er”. Test Plan: Running ``git grep '`\?[Ww]rite`\?er'`` no longer finds any results. wchargin-branch: io-write-docs
type is too big -> values of the type are too big strictly speaking, `[u8; usize::MAX]` or even `[[[u128; usize::MAX]; usize::MAX]; usize::MAX]` are absolutely fine types as long as you don't try to deal with any values of it. This error message seems to cause some confusion imo, for example in rust-lang#79135 (comment) so I would prefer us to be more precise here. See the added test case which uses one of these types without causing an error. r? ``@oli-obk``
@bors r+ p=11 rollup=never |
☀️ Test successful - checks-actions |
Tested on commit rust-lang/rust@8d2d001. Direct link to PR: <rust-lang/rust#79167> 💔 miri on linux: test-pass → test-fail (cc @oli-obk @eddyb @RalfJung).
This had up to 7.7% regressions on instruction counts and a 40% increase in the time to bootstrap libcore. I suspect #78785 might be to blame. @cuviper did you expect a performance regression for that PR? If not, does it make sense to back it out and try to land a modified version that doesn't affect perf as badly? |
I didn't expect a measurable impact, but it's possible the weak symbols have more effect than I realized. #79039 also modified the atomic ordering in that area. Maybe someone can |
Interesting, those are huge differences. None of these PRs seem suspicious though, at first glance. The weak syscall lookup should only happen once. Any later calls just end up doing a single atomic operation, which is completely insignificant compared to the syscall they execute right after. It'd be quite surprising if the first lookup has such a big effect. |
Hmm, most of the change is in |
@m-ou-se @cuviper you were right, #78785 had almost no impact. #79131 definitely caused the bootstrap increase but strangely instruction counts went down with that PR reverted. So I'm still stumped what caused the 7% regression on |
Yeah both reverts didn't obviously affect it at all (not even the 2-3% regressions on non-incr bits), but that benchmark is also a bit noisy historically so I wouldn't worry too much about it. |
Isn't that what you'd expect from reverting a slowdown PR? |
This rollup also introduced an increase in max-rss across the board. And it looks like #79131 was responsible, based on the corresponding max-rss decrease in the revert PR #79391. By the way, the 7% instruction count regression on It looks to me like #79131 was responsible for all or nearly all of the |
Successful merges:
std::io::Write
docs #79151 (Fix typo instd::io::Write
docs)Failed merges:
r? @ghost
@rustbot modify labels: rollup
Create a similar rollup