Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

\p{Lc} fails to compile, but should be equal to \p{Cased_Letter} #965

Closed
Aloso opened this issue Mar 13, 2023 · 6 comments
Closed

\p{Lc} fails to compile, but should be equal to \p{Cased_Letter} #965

Aloso opened this issue Mar 13, 2023 · 6 comments

Comments

@Aloso
Copy link

Aloso commented Mar 13, 2023

What version of regex are you using?

1.7.1

Describe the bug at a high level.

The syntax of regex seems to follow the ECMAScript spec. Upon checking, I noticed that 3 General Categories are not supported that work in other regex engines:

  • Surrogate
  • Cs (abbreviation for Surrogate)
  • Sc (abbreviation for Currency_Symbol)

But while the lack of support for Surrogate may be intentional, \p{Sc} should work, and does work when not abbreviated. It also works when prefixed with gc= or General_Category=:

Regex compiles?
\p{Currency_Symbol} yes
\p{Sc} no
\p{gc=Sc} yes
\p{GC=Sc} yes
\p{General_Category=Sc} yes

This bug might be related to the Script/sc property (e.g. \p{sc=Greek}), which happens to have the same abbreviation as the Currency_Symbol General Category.

I noticed that Unicode properties are case insensitive in regex, which is in violation of the ECMAScript spec. But since changing it would be a breaking change, it's probably not worth it.

What are the steps to reproduce the behavior?

Try to compile \p{Sc}

What is the actual behavior?

error: regex parse error:
    \p{Sc}
    ^^^^^^
error: Unicode property not found

What is the expected behavior?

It should work.

@BurntSushi
Copy link
Member

Thanks for the report. This is a duplicate of #835, although that's only about the Sc abbreviation. I have it fixed in some ongoing work that I hope to get merge at some point soon.

With respect to Surrogate, it is excluded explicitly. The regex crate only supports Unicode scalar values, which correspond precisely to the subset of all codepoints that exclude the surrogate codepoints. The reason for doing that is that surrogate codepoints are unrepresentable in UTF-8, and this crate only supports UTF-8. Since regex compilation converts Unicode classes into UTF-8 automata and since surrogate codepoints cannot be encoded in UTF-8, there is no way to proceed there. Either classes that contain surrogates should fail to compile, or they would otherwise have to be silently removed. The regex crate chooses the former behavior.

Popping up a level, what are you hoping to achieve with the \p{Surrogate} class?

The syntax of regex seems to follow the ECMAScript spec.

Could you please say what you gave that impression? I'd love to fix it, because it is most certainly not true.

I noticed that Unicode properties are case insensitive in regex, which is in violation of the ECMAScript spec. But since changing it would be a breaking change, it's probably not worth it.

Again, this is intentional and it is even explicitly documented in the Unicode support documentation:

In all cases, property name and value abbreviations are supported, and all names/values are matched loosely without regard for case, whitespace or underscores.

Indeed, it is actually ECMAScript that does not follow UTS #18.

@Aloso
Copy link
Author

Aloso commented Mar 13, 2023

With respect to Surrogate, it is excluded explicitly

That is what I assumed, and it makes perfect sense since a surrogate is not a Unicode scalar value. I just noticed it because I iterated over all General Categories to see which are supported by regex.

Popping up a level, what are you hoping to achieve with the \p{Surrogate} class?

Nothing. I just needed to know which properties are supported, so I can emit an error in Pomsky when an unsupported property is used. Unicode support in Pomsky is slightly broken at the moment, which I intend to fix in the next release.

The syntax of regex seems to follow the ECMAScript spec.

Could you please say what you gave that impression?

The syntax just looks similar, but upon second thought there aren't that many similarities. I think what animated this statement was my realization that Rust and ECMAScript support almost the same set of Unicode properties and use the same syntax to match them.

@BurntSushi
Copy link
Member

The syntax just looks similar, but upon second thought there aren't that many similarities.

Ah yeah, most regex flavors are quite similar, but can diverge in interesting and surprising ways. Some are definitely more similar than others.

I think what animated this statement was my realization that Rust and ECMAScript support almost the same set of Unicode properties and use the same syntax to match them.

Yeah, the key there is the common inspiration: UTS#18.

@BurntSushi
Copy link
Member

I'm going to close this because I think the Surrogate question is answered, and the Sc bug is tracked by another ticket and should be resolved soon.

@Aloso
Copy link
Author

Aloso commented Mar 15, 2023

@BurntSushi I found another one: \p{LC} doesn't work, but \p{gc=LC} does. Not sure how I missed this before. LC (short for Cased_Letter) combines Uppercase_Letter, Lowercase_Letter and Titlecase_Letter.

@BurntSushi BurntSushi reopened this Mar 15, 2023
@BurntSushi BurntSushi changed the title \p{Sc} fails to compile \p{Lc} fails to compile, but should be equal to \p{Cased_Letter} Mar 15, 2023
BurntSushi added a commit that referenced this issue Mar 15, 2023
This is more similar to the \p{Cf} bug than the \p{Sc} bug, but
basically, 'lc' is an abbreviation for both 'Cased_Letter' and
'Lowercase_Mapping'. Since we don't support the latter (currently), we
make 'lc' map to 'Cased_Letter'.

If we do ever add 'Lowercase_Mapping' in the future, then we will just
require users to type out its full form.

Fixes #965
@BurntSushi
Copy link
Member

Nice find! I have a fix incoming for that now too. The main issue is that lc is an abbreviation for both Cased_Letter and Lowercase_Mapping. Since we don't support the latter (but it is in the regex's Unicode table of property name aliases), I added a manual case for it to be mapped to Cased_Letter. (Just like I've done for cf and sc.)

BurntSushi added a commit that referenced this issue Mar 21, 2023
This is more similar to the \p{Cf} bug than the \p{Sc} bug, but
basically, 'lc' is an abbreviation for both 'Cased_Letter' and
'Lowercase_Mapping'. Since we don't support the latter (currently), we
make 'lc' map to 'Cased_Letter'.

If we do ever add 'Lowercase_Mapping' in the future, then we will just
require users to type out its full form.

Fixes #965
BurntSushi added a commit that referenced this issue Apr 15, 2023
This is more similar to the \p{Cf} bug than the \p{Sc} bug, but
basically, 'lc' is an abbreviation for both 'Cased_Letter' and
'Lowercase_Mapping'. Since we don't support the latter (currently), we
make 'lc' map to 'Cased_Letter'.

If we do ever add 'Lowercase_Mapping' in the future, then we will just
require users to type out its full form.

Fixes #965
BurntSushi added a commit that referenced this issue Apr 17, 2023
This is more similar to the \p{Cf} bug than the \p{Sc} bug, but
basically, 'lc' is an abbreviation for both 'Cased_Letter' and
'Lowercase_Mapping'. Since we don't support the latter (currently), we
make 'lc' map to 'Cased_Letter'.

If we do ever add 'Lowercase_Mapping' in the future, then we will just
require users to type out its full form.

Fixes #965
BurntSushi added a commit that referenced this issue Apr 17, 2023
This is more similar to the \p{Cf} bug than the \p{Sc} bug, but
basically, 'lc' is an abbreviation for both 'Cased_Letter' and
'Lowercase_Mapping'. Since we don't support the latter (currently), we
make 'lc' map to 'Cased_Letter'.

If we do ever add 'Lowercase_Mapping' in the future, then we will just
require users to type out its full form.

Fixes #965
BurntSushi added a commit that referenced this issue Apr 20, 2023
1.8.0 (2023-04-20)
==================
This is a sizeable release that will be soon followed by another sizeable
release. Both of them will combined close over 40 existing issues and PRs.

This first release, despite its size, essentially represent preparatory work
for the second release, which will be even bigger. Namely, this release:

* Increases the MSRV to Rust 1.60.0, which was released about 1 year ago.
* Upgrades its dependency on `aho-corasick` to the recently release 1.0
version.
* Upgrades its dependency on `regex-syntax` to the simultaneously released
`0.7` version. The changes to `regex-syntax` principally revolve around a
rewrite of its literal extraction code and a number of simplifications and
optimizations to its high-level intermediate representation (HIR).

The second release, which will follow ~shortly after the release above, will
contain a soup-to-nuts rewrite of every regex engine. This will be done by
bringing [`regex-automata`](https://github.com/BurntSushi/regex-automata) into
this repository, and then changing the `regex` crate to be nothing but an API
shim layer on top of `regex-automata`'s API.

These tandem releases are the culmination of about 3
years of on-and-off work that [began in earnest in March
2020](#656).

Because of the scale of changes involved in these releases, I would love to
hear about your experience. Especially if you notice undocumented changes in
behavior or performance changes (positive *or* negative).

Most changes in the first release are listed below. For more details, please
see the commit log, which reflects a linear and decently documented history
of all changes.

New features:

* [FEATURE #501](#501):
Permit many more characters to be escaped, even if they have no significance.
More specifically, any ASCII character except for `[0-9A-Za-z<>]` can now be
escaped. Also, a new routine, `is_escapeable_character`, has been added to
`regex-syntax` to query whether a character is escapeable or not.
* [FEATURE #547](#547):
Add `Regex::captures_at`. This filles a hole in the API, but doesn't otherwise
introduce any new expressive power.
* [FEATURE #595](#595):
Capture group names are now Unicode-aware. They can now begin with either a `_`
or any "alphabetic" codepoint. After the first codepoint, subsequent codepoints
can be any sequence of alpha-numeric codepoints, along with `_`, `.`, `[` and
`]`. Note that replacement syntax has not changed.
* [FEATURE #810](#810):
Add `Match::is_empty` and `Match::len` APIs.
* [FEATURE #905](#905):
Add an `impl Default for RegexSet`, with the default being the empty set.
* [FEATURE #908](#908):
A new method, `Regex::static_captures_len`, has been added which returns the
number of capture groups in the pattern if and only if every possible match
always contains the same number of matching groups.
* [FEATURE #955](#955):
Named captures can now be written as `(?<name>re)` in addition to
`(?P<name>re)`.
* FEATURE: `regex-syntax` now supports empty character classes.
* FEATURE: `regex-syntax` now has an optional `std` feature. (This will come
to `regex` in the second release.)
* FEATURE: The `Hir` type in `regex-syntax` has had a number of simplifications
made to it.
* FEATURE: `regex-syntax` has support for a new `R` flag for enabling CRLF
mode. This will be supported in `regex` proper in the second release.
* FEATURE: `regex-syntax` now has proper support for "regex that never
matches" via `Hir::fail()`.
* FEATURE: The `hir::literal` module of `regex-syntax` has been completely
re-worked. It now has more documentation, examples and advice.
* FEATURE: The `allow_invalid_utf8` option in `regex-syntax` has been renamed
to `utf8`, and the meaning of the boolean has been flipped.

Performance improvements:

* PERF: The upgrade to `aho-corasick 1.0` may improve performance in some
cases. It's difficult to characterize exactly which patterns this might impact,
but if there are a small number of longish (>= 4 bytes) prefix literals, then
it might be faster than before.

Bug fixes:

* [BUG #514](#514):
Improve `Debug` impl for `Match` so that it doesn't show the entire haystack.
* BUGS [#516](#516),
[#731](#731):
Fix a number of issues with printing `Hir` values as regex patterns.
* [BUG #610](#610):
Add explicit example of `foo|bar` in the regex syntax docs.
* [BUG #625](#625):
Clarify that `SetMatches::len` does not (regretably) refer to the number of
matches in the set.
* [BUG #660](#660):
Clarify "verbose mode" in regex syntax documentation.
* BUG [#738](#738),
[#950](#950):
Fix `CaptureLocations::get` so that it never panics.
* [BUG #747](#747):
Clarify documentation for `Regex::shortest_match`.
* [BUG #835](#835):
Fix `\p{Sc}` so that it is equivalent to `\p{Currency_Symbol}`.
* [BUG #846](#846):
Add more clarifying documentation to the `CompiledTooBig` error variant.
* [BUG #854](#854):
Clarify that `regex::Regex` searches as if the haystack is a sequence of
Unicode scalar values.
* [BUG #884](#884):
Replace `__Nonexhaustive` variants with `#[non_exhaustive]` attribute.
* [BUG #893](#893):
Optimize case folding since it can get quite slow in some pathological cases.
* [BUG #895](#895):
Reject `(?-u:\W)` in `regex::Regex` APIs.
* [BUG #942](#942):
Add a missing `void` keyword to indicate "no parameters" in C API.
* [BUG #965](#965):
Fix `\p{Lc}` so that it is equivalent to `\p{Cased_Letter}`.
* [BUG #975](#975):
Clarify documentation for `\pX` syntax.
BurntSushi added a commit that referenced this issue Apr 20, 2023
1.8.0 (2023-04-20)
==================
This is a sizeable release that will be soon followed by another sizeable
release. Both of them will combined close over 40 existing issues and PRs.

This first release, despite its size, essentially represent preparatory work
for the second release, which will be even bigger. Namely, this release:

* Increases the MSRV to Rust 1.60.0, which was released about 1 year ago.
* Upgrades its dependency on `aho-corasick` to the recently release 1.0
version.
* Upgrades its dependency on `regex-syntax` to the simultaneously released
`0.7` version. The changes to `regex-syntax` principally revolve around a
rewrite of its literal extraction code and a number of simplifications and
optimizations to its high-level intermediate representation (HIR).

The second release, which will follow ~shortly after the release above, will
contain a soup-to-nuts rewrite of every regex engine. This will be done by
bringing [`regex-automata`](https://github.com/BurntSushi/regex-automata) into
this repository, and then changing the `regex` crate to be nothing but an API
shim layer on top of `regex-automata`'s API.

These tandem releases are the culmination of about 3
years of on-and-off work that [began in earnest in March
2020](#656).

Because of the scale of changes involved in these releases, I would love to
hear about your experience. Especially if you notice undocumented changes in
behavior or performance changes (positive *or* negative).

Most changes in the first release are listed below. For more details, please
see the commit log, which reflects a linear and decently documented history
of all changes.

New features:

* [FEATURE #501](#501):
Permit many more characters to be escaped, even if they have no significance.
More specifically, any ASCII character except for `[0-9A-Za-z<>]` can now be
escaped. Also, a new routine, `is_escapeable_character`, has been added to
`regex-syntax` to query whether a character is escapeable or not.
* [FEATURE #547](#547):
Add `Regex::captures_at`. This filles a hole in the API, but doesn't otherwise
introduce any new expressive power.
* [FEATURE #595](#595):
Capture group names are now Unicode-aware. They can now begin with either a `_`
or any "alphabetic" codepoint. After the first codepoint, subsequent codepoints
can be any sequence of alpha-numeric codepoints, along with `_`, `.`, `[` and
`]`. Note that replacement syntax has not changed.
* [FEATURE #810](#810):
Add `Match::is_empty` and `Match::len` APIs.
* [FEATURE #905](#905):
Add an `impl Default for RegexSet`, with the default being the empty set.
* [FEATURE #908](#908):
A new method, `Regex::static_captures_len`, has been added which returns the
number of capture groups in the pattern if and only if every possible match
always contains the same number of matching groups.
* [FEATURE #955](#955):
Named captures can now be written as `(?<name>re)` in addition to
`(?P<name>re)`.
* FEATURE: `regex-syntax` now supports empty character classes.
* FEATURE: `regex-syntax` now has an optional `std` feature. (This will come
to `regex` in the second release.)
* FEATURE: The `Hir` type in `regex-syntax` has had a number of simplifications
made to it.
* FEATURE: `regex-syntax` has support for a new `R` flag for enabling CRLF
mode. This will be supported in `regex` proper in the second release.
* FEATURE: `regex-syntax` now has proper support for "regex that never
matches" via `Hir::fail()`.
* FEATURE: The `hir::literal` module of `regex-syntax` has been completely
re-worked. It now has more documentation, examples and advice.
* FEATURE: The `allow_invalid_utf8` option in `regex-syntax` has been renamed
to `utf8`, and the meaning of the boolean has been flipped.

Performance improvements:

* PERF: The upgrade to `aho-corasick 1.0` may improve performance in some
cases. It's difficult to characterize exactly which patterns this might impact,
but if there are a small number of longish (>= 4 bytes) prefix literals, then
it might be faster than before.

Bug fixes:

* [BUG #514](#514):
Improve `Debug` impl for `Match` so that it doesn't show the entire haystack.
* BUGS [#516](#516),
[#731](#731):
Fix a number of issues with printing `Hir` values as regex patterns.
* [BUG #610](#610):
Add explicit example of `foo|bar` in the regex syntax docs.
* [BUG #625](#625):
Clarify that `SetMatches::len` does not (regretably) refer to the number of
matches in the set.
* [BUG #660](#660):
Clarify "verbose mode" in regex syntax documentation.
* BUG [#738](#738),
[#950](#950):
Fix `CaptureLocations::get` so that it never panics.
* [BUG #747](#747):
Clarify documentation for `Regex::shortest_match`.
* [BUG #835](#835):
Fix `\p{Sc}` so that it is equivalent to `\p{Currency_Symbol}`.
* [BUG #846](#846):
Add more clarifying documentation to the `CompiledTooBig` error variant.
* [BUG #854](#854):
Clarify that `regex::Regex` searches as if the haystack is a sequence of
Unicode scalar values.
* [BUG #884](#884):
Replace `__Nonexhaustive` variants with `#[non_exhaustive]` attribute.
* [BUG #893](#893):
Optimize case folding since it can get quite slow in some pathological cases.
* [BUG #895](#895):
Reject `(?-u:\W)` in `regex::Regex` APIs.
* [BUG #942](#942):
Add a missing `void` keyword to indicate "no parameters" in C API.
* [BUG #965](#965):
Fix `\p{Lc}` so that it is equivalent to `\p{Cased_Letter}`.
* [BUG #975](#975):
Clarify documentation for `\pX` syntax.
crapStone added a commit to Calciumdibromid/CaBr2 that referenced this issue May 2, 2023
This PR contains the following updates:

| Package | Type | Update | Change |
|---|---|---|---|
| [regex](https://github.com/rust-lang/regex) | dependencies | minor | `1.7.3` -> `1.8.1` |

---

### Release Notes

<details>
<summary>rust-lang/regex</summary>

### [`v1.8.1`](https://github.com/rust-lang/regex/blob/HEAD/CHANGELOG.md#&#8203;181-2023-04-21)

\==================
This is a patch release that fixes a bug where a regex match could be reported
where none was found. Specifically, the bug occurs when a pattern contains some
literal prefixes that could be extracted *and* an optional word boundary in the
prefix.

Bug fixes:

-   [BUG #&#8203;981](rust-lang/regex#981):
    Fix a bug where a word boundary could interact with prefix literal
    optimizations and lead to a false positive match.

### [`v1.8.0`](https://github.com/rust-lang/regex/blob/HEAD/CHANGELOG.md#&#8203;180-2023-04-20)

\==================
This is a sizeable release that will be soon followed by another sizeable
release. Both of them will combined close over 40 existing issues and PRs.

This first release, despite its size, essentially represents preparatory work
for the second release, which will be even bigger. Namely, this release:

-   Increases the MSRV to Rust 1.60.0, which was released about 1 year ago.
-   Upgrades its dependency on `aho-corasick` to the recently released 1.0
    version.
-   Upgrades its dependency on `regex-syntax` to the simultaneously released
    `0.7` version. The changes to `regex-syntax` principally revolve around a
    rewrite of its literal extraction code and a number of simplifications and
    optimizations to its high-level intermediate representation (HIR).

The second release, which will follow ~shortly after the release above, will
contain a soup-to-nuts rewrite of every regex engine. This will be done by
bringing [`regex-automata`](https://github.com/BurntSushi/regex-automata) into
this repository, and then changing the `regex` crate to be nothing but an API
shim layer on top of `regex-automata`'s API.

These tandem releases are the culmination of about 3
years of on-and-off work that [began in earnest in March
2020](rust-lang/regex#656).

Because of the scale of changes involved in these releases, I would love to
hear about your experience. Especially if you notice undocumented changes in
behavior or performance changes (positive *or* negative).

Most changes in the first release are listed below. For more details, please
see the commit log, which reflects a linear and decently documented history
of all changes.

New features:

-   [FEATURE #&#8203;501](rust-lang/regex#501):
    Permit many more characters to be escaped, even if they have no significance.
    More specifically, any ASCII character except for `[0-9A-Za-z<>]` can now be
    escaped. Also, a new routine, `is_escapeable_character`, has been added to
    `regex-syntax` to query whether a character is escapeable or not.
-   [FEATURE #&#8203;547](rust-lang/regex#547):
    Add `Regex::captures_at`. This filles a hole in the API, but doesn't otherwise
    introduce any new expressive power.
-   [FEATURE #&#8203;595](rust-lang/regex#595):
    Capture group names are now Unicode-aware. They can now begin with either a `_`
    or any "alphabetic" codepoint. After the first codepoint, subsequent codepoints
    can be any sequence of alpha-numeric codepoints, along with `_`, `.`, `[` and
    `]`. Note that replacement syntax has not changed.
-   [FEATURE #&#8203;810](rust-lang/regex#810):
    Add `Match::is_empty` and `Match::len` APIs.
-   [FEATURE #&#8203;905](rust-lang/regex#905):
    Add an `impl Default for RegexSet`, with the default being the empty set.
-   [FEATURE #&#8203;908](rust-lang/regex#908):
    A new method, `Regex::static_captures_len`, has been added which returns the
    number of capture groups in the pattern if and only if every possible match
    always contains the same number of matching groups.
-   [FEATURE #&#8203;955](rust-lang/regex#955):
    Named captures can now be written as `(?<name>re)` in addition to
    `(?P<name>re)`.
-   FEATURE: `regex-syntax` now supports empty character classes.
-   FEATURE: `regex-syntax` now has an optional `std` feature. (This will come
    to `regex` in the second release.)
-   FEATURE: The `Hir` type in `regex-syntax` has had a number of simplifications
    made to it.
-   FEATURE: `regex-syntax` has support for a new `R` flag for enabling CRLF
    mode. This will be supported in `regex` proper in the second release.
-   FEATURE: `regex-syntax` now has proper support for "regex that never
    matches" via `Hir::fail()`.
-   FEATURE: The `hir::literal` module of `regex-syntax` has been completely
    re-worked. It now has more documentation, examples and advice.
-   FEATURE: The `allow_invalid_utf8` option in `regex-syntax` has been renamed
    to `utf8`, and the meaning of the boolean has been flipped.

Performance improvements:

-   PERF: The upgrade to `aho-corasick 1.0` may improve performance in some
    cases. It's difficult to characterize exactly which patterns this might impact,
    but if there are a small number of longish (>= 4 bytes) prefix literals, then
    it might be faster than before.

Bug fixes:

-   [BUG #&#8203;514](rust-lang/regex#514):
    Improve `Debug` impl for `Match` so that it doesn't show the entire haystack.
-   BUGS [#&#8203;516](rust-lang/regex#516),
    [#&#8203;731](rust-lang/regex#731):
    Fix a number of issues with printing `Hir` values as regex patterns.
-   [BUG #&#8203;610](rust-lang/regex#610):
    Add explicit example of `foo|bar` in the regex syntax docs.
-   [BUG #&#8203;625](rust-lang/regex#625):
    Clarify that `SetMatches::len` does not (regretably) refer to the number of
    matches in the set.
-   [BUG #&#8203;660](rust-lang/regex#660):
    Clarify "verbose mode" in regex syntax documentation.
-   BUG [#&#8203;738](rust-lang/regex#738),
    [#&#8203;950](rust-lang/regex#950):
    Fix `CaptureLocations::get` so that it never panics.
-   [BUG #&#8203;747](rust-lang/regex#747):
    Clarify documentation for `Regex::shortest_match`.
-   [BUG #&#8203;835](rust-lang/regex#835):
    Fix `\p{Sc}` so that it is equivalent to `\p{Currency_Symbol}`.
-   [BUG #&#8203;846](rust-lang/regex#846):
    Add more clarifying documentation to the `CompiledTooBig` error variant.
-   [BUG #&#8203;854](rust-lang/regex#854):
    Clarify that `regex::Regex` searches as if the haystack is a sequence of
    Unicode scalar values.
-   [BUG #&#8203;884](rust-lang/regex#884):
    Replace `__Nonexhaustive` variants with `#[non_exhaustive]` attribute.
-   [BUG #&#8203;893](rust-lang/regex#893):
    Optimize case folding since it can get quite slow in some pathological cases.
-   [BUG #&#8203;895](rust-lang/regex#895):
    Reject `(?-u:\W)` in `regex::Regex` APIs.
-   [BUG #&#8203;942](rust-lang/regex#942):
    Add a missing `void` keyword to indicate "no parameters" in C API.
-   [BUG #&#8203;965](rust-lang/regex#965):
    Fix `\p{Lc}` so that it is equivalent to `\p{Cased_Letter}`.
-   [BUG #&#8203;975](rust-lang/regex#975):
    Clarify documentation for `\pX` syntax.

</details>

---

### Configuration

📅 **Schedule**: Branch creation - At any time (no schedule defined), Automerge - At any time (no schedule defined).

🚦 **Automerge**: Disabled by config. Please merge this manually once you are satisfied.

♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox.

🔕 **Ignore**: Close this PR and you won't be reminded about this update again.

---

 - [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check this box

---

This PR has been generated by [Renovate Bot](https://github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzNS42MS4wIiwidXBkYXRlZEluVmVyIjoiMzUuNjYuMyIsInRhcmdldEJyYW5jaCI6ImRldmVsb3AifQ==-->

Co-authored-by: cabr2-bot <[email protected]>
Co-authored-by: crapStone <[email protected]>
Reviewed-on: https://codeberg.org/Calciumdibromid/CaBr2/pulls/1874
Reviewed-by: crapStone <[email protected]>
Co-authored-by: Calciumdibromid Bot <[email protected]>
Co-committed-by: Calciumdibromid Bot <[email protected]>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Projects
None yet
Development

No branches or pull requests

2 participants