,~~~
+~~~~~
?~~~~+~
8~~~~~+~,
O~~~~~=+==
8?~~~~=+=~~
NI=~~~~~~~~~
DO?~~=7I~~~~=
Z8?~~~~~~:+~?$I, ,,,,,
ZNOI~~~~~~~~~~~.~7$$Z7:~~ZZZOSCZZ+,
ZDO7:~~~=~~~~~~~ $MZCSOZZ,~
ZDOOI~~?~~~~===== ~DZO7
~NDOO?~~~~~~~~~~~ ~7:$
:I OO$+~~~~==~~==~ ~? Z
DDDD8D?~~~~~~~====~ ~: I$
D DDDN8Z=~~~~~===~~~~ + I`
? DDDDN8O7~~~~~~~~====.7 $$
N888DNMOO?~~~~~===~~~$? .?
O88+DM ~NNN88OI~~~~~=~~~+~~?/$
D OVERTONE88I~~~~~===~~~,~
D ~ INC.NNN888I~~~~~=~~==,
:I ND~ DDN888O~~~?======,
8 8DDD ~ M88887:I~~=====
D 8DDDDND D 88$~~~===+z
:D8MDDDNN DD87~~I~+=
88DDDDDN DD7?~~
$CLOJURE DD`
$8DSDDDD
DDDCDDDN 888 d8b
::7OLIBRARY$$$77I$IZ7 888 Y8P
888
.d88b. .d8888b .d8888b .d8888b 888 8888
d88""88b 88K d88P" d88P" 888 "888
888 888 "Y8888b. 888 888888 888 888 888
Y88..88P X88 Y88b. Y88b. 888 888
"y88p" 88888P' "Y8888P "Y8888P 888 888
888
d88P
888P"
A full-featured UDP-based OSC communication library created for Project Overtone. It implements OSC 1.0 with some additional types from 1.1 also supported (long and double). Find OSC documentation here:
http://opensoundcontrol.org/spec-1_0
(use 'overtone.osc)
(def PORT 4242)
; start a server and create a client to talk with it
(def server (osc-server PORT))
(def client (osc-client "localhost" PORT))
; Register a handler function for the /test OSC address
; The handler takes a message map with the following keys:
; [:src-host, :src-port, :path, :type-tag, :args]
(osc-handle server "/test" (fn [msg] (println "MSG: " msg)))
; send it some messages
(doseq [val (range 10)]
(osc-send client "/test" "i" val))
(Thread/sleep 1000)
;remove handler
(osc-rm-handler server "/test")
; stop listening and deallocate resources
(osc-close client)
(osc-close server)
The osc-clj client allows you to send OSC messages to a server listening on a specific port on a specific host.
OSC messages contain the following elements:
- A path (i.e.
/foo/bar/baz) - An arbitrary list of params (i.e.
2 "baz" 3.14159265 (byte-array 10)
The supported param types are:
- Integers
- Floats
- Strings
- Byte Arrays
- Longs
- Doubles
You don't need to specify which type you are using, osc-clj will infer these with reflection.
Each message may or may not trigger a method handler to be executed on the receiving server - this is dependent on whether the path sent matches a registered handler on the server. Multiple handlers can be called by using regexp-like patterns in your out going path which may be matched to multiple handlers (see the pattern matching section below for more info).
In order to send messages, you must first create a client withi osc-client:
(def client (osc-client "localhost" 9801))
Then you may send a message using osc-send:
(osc-send client "/foo/bar/baz 1 2 "three")
The osc-clj server allows you to receive OSC messages by listening on a specific port. You may then register method handlers and/or listeners with the server which may be triggered by incoming messages.
Create new server with osc-server:
(def server (osc-server 9800))
osc-clj servers support both listeners and handlers. Listeners are fns you register which will be triggered for each and every incoming message. The fn must accept one argument - the message to receive. Each listener may also be associated with a unique key which allows you to individually remove it at a later time.
Here we use osc-listen to add a generic listener that will print all incoming OSC messages to std-out. We also specify the key :debug:
(osc-listen server (fn [msg] (println "Listener: " msg)) :debug)
To remove the listener simply call:
(osc-rm-listener server :debug)
osc-clj also supplies the fn osc-rm-all-listeners which will remove all listeners on the specified server.
Handlers are registered with an OSC path such as /foo/bar - they are only triggered if the path of the incoming OSC message matches the registered path. Only one handler may be registered with any given path.
To register a handler for the path "/foo/bar" do the following:
(osc-handle s "/foo/bar" (fn [msg] (println "Handler for /foo/bar: " msg)))
This will only print out received messages that match the path "/foo/bar". To remove call:
(osc-rm-handler s "/foo/bar")
osc-clj also supplies the fn osc-rm-all-handlers which will remove all the servers handlers within the path and below in the hierarchy (i.e. (osc-rm-all-handlers server "/foo") will remove all handlers registered at /foo and any below i.e. /foo/bar /foo/bar/baz etc. Passing no path to osc-rm-all-handlers will remove all handlers on the server.
OSC bundles are groups of messages with a collective timestamp. This allows groups of messages to be scheduled to be handled at the same time which may be some arbitrary point in the future.
When osc-clj receives a timestamped bundle it will schedule the bundle to be handled at the time of the timestamp. However, if the time is in the past, it will be handled immediately.
Handling the bundle means unpacking it and handling each contained message in sequence. Therefore, if a bundle contains another, and the inner bundle's timestamp is earlier than the outer bundle, it will not be honoured - instead it will trigger at the outer bundle's timestamp.
The simplest way to construct and send a bundle is with the macro in-osc-bundle. All OSC messages and bundles sent within the scope of the macro call will get sent together in the parent bundle with the specified timestamp:
Send the enclosing messages inside a bundle that is timestamped for 1 second from now:
(in-osc-bundle client (+ (osc-now) 1000)
(osc-send client "/foo" "bar" 42)
; Call functions that send more osc messages
(do-stuff client))
You can also create bundles by hand with osc-bundle and send them with osc-send-bundle. OSC messages can also be created with osc-msg in order to populate your bundle.
When constructing bundles, if you specify the timestamp with a Long, you can sample accurate messaging (with precision granularity around 200 picoseconds) for use with SuperCollider and other OSC servers. Bundles received with future timestamps are scheduled to be executed at that future time (with a precision granularity of around 10 milliseconds).
osc-clj has full support for OSC pattern matching. This allows incoming messages to specify regexp like matcher symbols such as ? and * allowing the message to match more than one path.
The basic matchers are:
*Matches 0 or more arbitrary chars (osc-cljimplements this in a non-greedy way)?Matches 1 arbitrary char[abc]Matches 1 char: either a, b or c[!abc]Matches 1 char: not a,b or c[a-d]Matches 1 char: in the range a-d inclusive[!a-d]is also recognised.{foo,bar}Matches 1 word - either foo or bar
The matchers may also be combined:
/foo/{bar,baz}/*/*quux?/[abc]def[!h]/phasor[0-9]/
There is no guarantee on the order of fn triggering.
For example, /foo/{bar,baz}/quux will trigger fns in both /foo/bar/quux/ and /foo/baz/quux but with no specific order.
osc-clj has support for broadcasting the presence of your OSC servers to the local network using zerconf. This is disabled by default.
On creation of a server, you may specify an option tag:
(def server (osc-server 9800 "My OSC Server"))
The string My OSC Server is then used to register your server with zeroconf. In order to use zeroconf you must turn it on:
(zero-conf-on)
You should now see your server with clients that speak zeroconf. It is known that zero-conf can eat up a lot of cpu time - especially on chatty networks. It is therefore recommended to switch it off once you have configured and connected your client:
(zero-conf-off)
Include in your `project.clj like so:
[overtone/osc-clj "0.7.1"]
Downloads and the source repository can be found on GitHub:
https://github.com/overtone/osc-clj
For an example of this library in use within the check out Overtone, located here:
https://github.com/overtone/overtone
For any questions, comments or patches, use the Overtone google group:
http://groups.google.com/group/overtone
- Jeff Rose
- Sam Aaron
- mw10013