Apple Magic Keyboard Driver (model A1644) for Windows 10. No other drivers (such as Apple's Bootcamp) are needed or should be instaled.
Supported Feafures:
- Swaps the Fn-Ctrl keys to align with standard Windows keyboard layouts (fearture not supported by Apple's Bootcamp driver).
- Maps the missing Windows keys such as the Del, Insert, Print Screen, Pause/Break, etc.
Note that WinAppleKey is only tested and supported on Windows 10 (64-bit).
WinAppleKey is implemented as a HIDCLASS LowerFilter WDM kernel mode driver.
DISCLAIMER: This driver is signed with a self-signed (test/development) certificate. For that reason, Windows will not directly allow the driver installation unless in TESTSIGNING mode. Please be aware that permanently running Windows in TESTSIGNING mode leaves your system open to potential security risks; so please be aware of what you are doing as any consequence because of this is solely your responsibility. WinAppleKey is free software that you are willing to build and/or use completely at your own risk.
NOTE: If your system is running a UEFI BIOS, you will need to disable Secure Boot through your BIOS first.
To switch to TESTSIGNING mode issue the following command (in an Administrative command prompt) and then reboot:
bcdedit.exe -set TESTSIGNING ON
You can now run the Setup.msi installer.
To uninstall, run the uninstaller from the Control Panel Programs and then manually revert TESTSIGNING mode by issuing the following command (in an Administrative command prompt):
bcdedit.exe -set TESTSIGNING OFF
WinAppleKey creates the following key mappings:
| Input Key(s) | Output Key |
|---|---|
| LCtrl | Fn |
| Fn | Left Ctrl |
| ⏏︎ Eject | Del |
| ⌘ Cmd | Alt |
| ⌥ Alt | Cmd |
| Fn+[F1]...[F12] | [F13]...[F24] |
| Fn+LCtrl | Right Ctrl |
| Fn+Return | Insert |
| Fn+P | Print Screen |
| Fn+S | Scroll Lock |
| Fn+B | Pause/Break |
| Fn+↑ | Page Up |
| Fn+↓ | Page Down |
| Fn+← | Home |
| Fn+→ | End |
Multimedia Keys: The multimedia keys are not directly mapped as they correspond to F19-F24 instead but you can easily use this AutoHotkey script for that purpose.
You can use regedit.exe to optionally modify certain driver settings.
To enable/disable the Alt-Cmd key swapping edit the DWORD key value: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WinAppleKey\SwapAltCmd. The default value is 0 (off).
To enable/disable the Fn-Ctrl key swapping edit the DWORD key value: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WinAppleKey\SwapFnCtrl. The default value is 1 (on).
After changing any of these values, you will need to disconnect/connect your associated Apple keyboard(s) to trigger a driver reload, or alternatively reboot your machine.
To build the driver you will need Visual Studio 2017 along with an installation of the Windows 10 Driver Kit (WDK). For the installer project, you will additionally need to install the WiX toolset version v3.11 or better.
Aiming to save you some time from sending me an e-mail :)
1. Will you ever release a full version (i.e. not self-signed) of the driver that does not require Windows running in TESTSIGNING mode?
Unfortunately I can't. This is due to Microsoft enforced restrictions. In order to fully release a device driver for Windows 10 (and later) you need to run a company (Ltd.) and also purchase a driver signing certificate for that company. Both cost a significant amount of money. WinAppleKey is free and open source and I do not make any money out of it. But there is similar free software for Apple keyboards, which does not require a driver installation. It uses a custom programmed Raspberry Pi Zero W device that functions as a special USB dongle for using Apple keyboards on Windows. More info here.
Bitcoin: bc1qpu72u9greulx9wx3kukrqag9fgsmzkkjdah872