pieeprom-2024-04-17: 2712: Promote to default release (automatic update)

Interesting changes since the last automatic update: * Enable network install * Enable over-clocking frequencies > 3GHz See: ttps://github.com/raspberrypi/firmware/issues/1876 * Adjust SDRAM refresh rate according to temperature and address a performance gap between 4GB and 8GB parts in benchmarks. See: raspberrypi/firmware#1854 * Support custom CA certs with HTTPS boot * Move non Kernel ARM stages back to 512KB raspberrypi/firmware#1868 * Assorted HAT+ and NVMe interop improvements. * Fix TRYBOOT if secure-boot is enabled. * Preliminary support for D0 and CM5.
raspberrypi · Apr 18, 2024 · 7a1a01c · 7a1a01c
1 parent f4580cd
commit 7a1a01c
Show file tree

Hide file tree

Showing 5 changed files with 6 additions and 2 deletions.
diff --git a/firmware-2712/default/pieeprom-2024-04-17.bin b/firmware-2712/default/pieeprom-2024-04-17.bin
diff --git a/firmware-2712/default/recovery.bin b/firmware-2712/default/recovery.bin
diff --git a/firmware-2712/release-notes.md b/firmware-2712/release-notes.md
@@ -1,5 +1,9 @@
 # Raspberry Pi5 bootloader EEPROM release notes
 
+2024-04-18: Promote the 2024-04-17 release to the default release (default) (automatic update)
+* Select pieeprom-2024-04-17.bin to be the new default release and bump the
+  automatic update minimum version to this.
+
 2024-04-18: Update RP1 firmware to extend PCIe L1 entry timeout to 32 us (latest)
 * Extend PCIe L1 entry timeout to 32us
   Fix xhci soft reset on link-down

diff --git a/imager/make-imager-release b/imager/make-imager-release
@@ -8,4 +8,4 @@ script_dir=$(cd "$(dirname "$0")" && pwd)
 ${script_dir}/make-release critical 2023-01-11 000138c0 "${script_dir}/2711-config" release-2711 rpi-boot-eeprom-recovery 2711
 
 # Pi5
-${script_dir}/make-release critical 2024-02-16 "" "${script_dir}/2712-config" release-2712 rpi-boot-eeprom-recovery 2712
+${script_dir}/make-release critical 2024-04-17 "" "${script_dir}/2712-config" release-2712 rpi-boot-eeprom-recovery 2712
diff --git a/rpi-eeprom-update b/rpi-eeprom-update
@@ -400,7 +400,7 @@ checkDependencies() {
    elif [ $(((0x$BOARD_INFO >> 12) & 15)) = 4 ]; then
       BCM_CHIP=2712
       EEPROM_SIZE=2097152
-      BOOTLOADER_AUTO_UPDATE_MIN_VERSION="${BOOTLOADER_AUTO_UPDATE_MIN_VERSION:-1704470260}"
+      BOOTLOADER_AUTO_UPDATE_MIN_VERSION="${BOOTLOADER_AUTO_UPDATE_MIN_VERSION:-1713358463}"
       SPIDEV=/dev/spidev10.0
       # Default is to use flashrom if availableon BCM2712
       RPI_EEPROM_USE_FLASHROM=${RPI_EEPROM_USE_FLASHROM:-1}