Initial 25 port

keyboards/40percentclub/25/25.c

@@ -0,0 +1,60 @@
+/* Copyright 2018
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "25.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}
+
+#ifdef SWAP_HANDS_ENABLE
+__attribute__ ((weak))
+const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
+	{{4, 5}, {3, 5}, {2, 5}, {1, 5}, {0, 5}},
+	{{4, 6}, {3, 6}, {2, 6}, {1, 6}, {0, 6}},
+	{{4, 7}, {3, 7}, {2, 7}, {1, 7}, {0, 7}},
+	{{4, 8}, {3, 8}, {2, 8}, {1, 8}, {0, 8}},
+	{{4, 9}, {3, 9}, {2, 9}, {1, 9}, {0, 9}},
+
+	{{0, 0}, {1, 0}, {2, 0}, {3, 0}, {4, 0}},
+  {{0, 1}, {1, 1}, {2, 1}, {3, 1}, {4, 1}},
+  {{0, 2}, {1, 2}, {2, 2}, {3, 2}, {4, 2}},
+	{{0, 3}, {1, 3}, {2, 3}, {3, 3}, {4, 3}},
+	{{0, 4}, {1, 4}, {2, 4}, {3, 4}, {4, 4}},
+};
+#endif

keyboards/40percentclub/25/25.h

@@ -0,0 +1,85 @@
+/* Copyright 2018
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+#define ___ KC_NO
+
+#ifndef FLIP_HALF
+#define LAYOUT_ortho_5x10( \
+	L00, L01, L02, L03, L04, R00, R01, R02, R03, R04, \
+	L10, L11, L12, L13, L14, R10, R11, R12, R13, R14, \
+	L20, L21, L22, L23, L24, R20, R21, R22, R23, R24, \
+	L30, L31, L32, L33, L34, R30, R31, R32, R33, R34, \
+	L40, L41, L42, L43, L44, R40, R41, R42, R43, R44  \
+) { \
+	{ L00, L01, L02, L03, L04 }, \
+	{ L10, L11, L12, L13, L14 }, \
+	{ L20, L21, L22, L23, L24 }, \
+	{ L30, L31, L32, L33, L34 }, \
+	{ L40, L41, L42, L43, L44 }, \
+	{ R04, R03, R02, R01, R00 }, \
+	{ R14, R13, R12, R11, R10 }, \
+	{ R24, R23, R22, R21, R20 }, \
+	{ R34, R33, R32, R31, R30 }, \
+	{ R44, R43, R42, R41, R40 }  \
+}
+#else
+#define LAYOUT_ortho_5x10( \
+	L00, L01, L02, L03, L04, R00, R01, R02, R03, R04, \
+	L10, L11, L12, L13, L14, R10, R11, R12, R13, R14, \
+	L20, L21, L22, L23, L24, R20, R21, R22, R23, R24, \
+	L30, L31, L32, L33, L34, R30, R31, R32, R33, R34, \
+	L40, L41, L42, L43, L44, R40, R41, R42, R43, R44  \
+) { \
+	{ L00, L01, L02, L03, L04 }, \
+	{ L10, L11, L12, L13, L14 }, \
+	{ L20, L21, L22, L23, L24 }, \
+	{ L30, L31, L32, L33, L34 }, \
+	{ L40, L41, L42, L43, L44 }, \
+	{ R00, R01, R02, R03, R04 }, \
+	{ R10, R11, R12, R13, R14 }, \
+	{ R20, R21, R22, R23, R24 }, \
+	{ R30, R31, R32, R33, R34 }, \
+	{ R40, R41, R42, R43, R44 }  \
+}
+#endif
+
+#define LAYOUT_ortho_5x5( \
+	L00, L01, L02, L03, L04, \
+	L10, L11, L12, L13, L14, \
+	L20, L21, L22, L23, L24, \
+	L30, L31, L32, L33, L34, \
+	L40, L41, L42, L43, L44  \
+) { \
+	{ L00, L01, L02, L03, L04 }, \
+	{ L10, L11, L12, L13, L14 }, \
+	{ L20, L21, L22, L23, L24 }, \
+	{ L30, L31, L32, L33, L34 }, \
+	{ L40, L41, L42, L43, L44 }, \
+	{ ___, ___, ___, ___, ___ }, \
+  { ___, ___, ___, ___, ___ }, \
+  { ___, ___, ___, ___, ___ }, \
+  { ___, ___, ___, ___, ___ }, \
+  { ___, ___, ___, ___, ___ }  \
+}
+
+#define LAYOUT_macro LAYOUT_ortho_5x5
+#define LAYOUT_split LAYOUT_ortho_5x10
+
+#ifdef USE_I2C
+  #error "I2C not Supported"
+#endif

keyboards/40percentclub/25/config.h

@@ -0,0 +1,230 @@
+/* Copyright 2018
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0A0C
+#define DEVICE_VER      0x0F25
+#define MANUFACTURER    di0ib
+#define PRODUCT         The 5x5 Keyboard
+#define DESCRIPTION     A split 50 key keyboard
+
+#define USE_SERIAL
+
+/* Select hand configuration */
+#define MASTER_LEFT
+//#define MASTER_RIGHT
+//#define EE_HANDS
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 5*2
+#define MATRIX_COLS 5
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 }
+#define MATRIX_COL_PINS { F4, F5, F6, F7, B1 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+// #define RGBLIGHT_ANIMATIONS
+// #define RGBLED_NUM 16
+// #define RGBLIGHT_HUE_STEP 8
+// #define RGBLIGHT_SAT_STEP 8
+// #define RGBLIGHT_VAL_STEP 8
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/