[Documentation] Cosmovisor

cmd/poktrolld/cmd/commands.go

@@ -88,7 +88,7 @@ func queryCommand() *cobra.Command {
 		authcmd.QueryTxCmd(),
 		server.QueryBlockResultsCmd(),
 	)
-	cmd.PersistentFlags().String(flags.FlagChainID, "", "The network chain ID")
+	cmd.PersistentFlags().String(flags.FlagChainID, DefaultChainID, "The network chain ID")
 
 	return cmd
 }
@@ -114,7 +114,7 @@ func txCommand() *cobra.Command {
 		authcmd.GetDecodeCommand(),
 		authcmd.GetSimulateCmd(),
 	)
-	cmd.PersistentFlags().String(flags.FlagChainID, "", "The network chain ID")
+	cmd.PersistentFlags().String(flags.FlagChainID, DefaultChainID, "The network chain ID")
 
 	return cmd
 }

cmd/poktrolld/cmd/config.go

@@ -2,6 +2,7 @@ package cmd
 
 import (
 	"sync"
+	"time"
 
 	cmtcfg "github.com/cometbft/cometbft/config"
 	serverconfig "github.com/cosmos/cosmos-sdk/server/config"
@@ -34,20 +35,46 @@ func initSDKConfig() {
 	config.Seal()
 }
 
-// initCometBFTConfig helps to override default CometBFT Config values.
-// return cmtcfg.DefaultConfig if no custom configuration is required for the application.
+// The values set here become the default configuration for newly initialized nodes.
+// However, it's crucial to note that:
+// 1. These defaults only apply when a node is first initialized using `poktrolld init`.
+// 2. Changing these values in the code will not automatically update existing node configurations.
+// 3. Node operators can still manually override these defaults in their local config files.
+//
+// Therefore, it's critical to choose sensible default values carefully, as they will form
+// the baseline configuration for most network participants. Any future changes to these
+// defaults will only affect newly initialized nodes, not existing ones.
+
+// As we use `ignite` CLI to provision the first validator it is important to note that the configuration files
+// provisioned by ignite have additional overrides adjusted in ignite's `config.yml`
+
+// initCometBFTConfig helps to override default CometBFT Config (config.toml) values.
+// These values are going to be rendered into the config file on `poktrolld init`.
+// TODO_MAINNET: Reconsider values - check `config.toml` for possible options.
 func initCometBFTConfig() *cmtcfg.Config {
 	cfg := cmtcfg.DefaultConfig()
 
 	// these values put a higher strain on node memory
 	// cfg.P2P.MaxNumInboundPeers = 100
 	// cfg.P2P.MaxNumOutboundPeers = 40
 
+	cfg.Consensus.TimeoutPropose = 60 * time.Second
+	cfg.Consensus.TimeoutProposeDelta = 5 * time.Second
+	cfg.Consensus.TimeoutPrevote = 10 * time.Second
+	cfg.Consensus.TimeoutPrevoteDelta = 5 * time.Second
+	cfg.Consensus.TimeoutPrecommit = 10 * time.Second
+	cfg.Consensus.TimeoutPrecommitDelta = 5 * time.Second
+	cfg.Consensus.TimeoutCommit = 60 * time.Second
+	cfg.Instrumentation.Prometheus = true
+	cfg.LogLevel = "info"
+
 	return cfg
 }
 
-// initAppConfig helps to override default appConfig template and configs.
+// initAppConfig helps to override default appConfig (app.toml) template and configs.
+// These values are going to be rendered into the config file on `poktrolld init`.
 // return "", nil if no custom configuration is required for the application.
+// TODO_MAINNET: Reconsider values - check `app.toml` for possible options.
 func initAppConfig() (string, interface{}) {
 	// The following code snippet is just for reference.
 	type CustomAppConfig struct {
@@ -72,6 +99,16 @@ func initAppConfig() (string, interface{}) {
 	// srvCfg.MinGasPrices = "0stake"
 	// srvCfg.BaseConfig.IAVLDisableFastNode = true // disable fastnode by default
 
+	srvCfg.MinGasPrices = "0.000000001upokt" // Also adjust ignite's `config.yml`.
+	srvCfg.Mempool.MaxTxs = 10000
+	srvCfg.Telemetry.Enabled = true
+	srvCfg.Telemetry.PrometheusRetentionTime = 60 // in seconds. This turns on Prometheus support.
+	srvCfg.Telemetry.MetricsSink = "mem"
+	srvCfg.Pruning = "nothing" // archiving node by default
+	srvCfg.API.Enable = true
+	srvCfg.GRPC.Enable = true
+	srvCfg.GRPCWeb.Enable = true
+
 	customAppConfig := CustomAppConfig{
 		Config: *srvCfg,
 	}

cmd/poktrolld/cmd/root.go

@@ -4,7 +4,6 @@ import (
 	"errors"
 	"log"
 	"os"
-	"strings"
 
 	"cosmossdk.io/client/v2/autocli"
 	clientv2keyring "cosmossdk.io/client/v2/autocli/keyring"
@@ -31,6 +30,9 @@ import (
 	relayercmd "github.com/pokt-network/poktroll/pkg/relayer/cmd"
 )
 
+// TODO_MAINNET: adjust chain ID for the mainnet if it's going to change
+const DefaultChainID = "poktroll"
+
 // NewRootCmd creates a new root command for poktrolld. It is called once in the main function.
 func NewRootCmd() *cobra.Command {
 	InitSDKConfig()
@@ -118,7 +120,7 @@ func NewRootCmd() *cobra.Command {
 	initRootCmd(rootCmd, clientCtx.TxConfig, clientCtx.InterfaceRegistry, clientCtx.Codec, moduleBasicManager)
 
 	if err := overwriteFlagDefaults(rootCmd, map[string]string{
-		flags.FlagChainID:        strings.ReplaceAll(app.Name, "-", ""),
+		flags.FlagChainID:        DefaultChainID,
 		flags.FlagKeyringBackend: "test",
 	}); err != nil {
 		log.Fatal(err)

config.yml

@@ -77,7 +77,13 @@ client:
 validators:
   - name: validator1
     bonded: 900000000upokt
+    # DEV_NOTE: adjust `cmd/poktrolld/cmd/config.go` to change the default options. The section below **ONLY** changes
+    # the values for the first validator, and the config is rendered using `ignite` cli. This is primarily used for
+    # LocalNet. Other participants of the network are relying on `poktrolld init`, which gets values from `cmd/config.go`.
     app:
+      # DEV_NOTE: Ignite does not carry over all defaults, so we are going to match `minimum-gas-prices` with `cmd/config.go`.
+      # See the enhancement request here: https://github.com/ignite/cli/issues/4340
+      minimum-gas-prices: 0.000000001upokt
       telemetry:
         enabled: true
         prometheus-retention-time: "600" # seconds

docusaurus/docs/operate/quickstart/docker_compose_walkthrough.md

@@ -510,7 +510,7 @@ The endpoint you want to send request to is: `http://your_node:appgate_server_po
 represented by `0021`:
 
 ```bash
-curl http://$NODE_HOSTNAME:85/00\
+curl http://$NODE_HOSTNAME:85/0021 \
   -X POST \
   -H "Content-Type: application/json" \
   --data '{"method":"eth_blockNumber","params":[],"id":1,"jsonrpc":"2.0"}'
@@ -658,7 +658,7 @@ To ensure you get a response, you may need to run the request a few times:
 
 ```bash
 for i in {1..10}; do
-  curl http://$NODE_HOSTNAME:85/00\
+  curl http://$NODE_HOSTNAME:85/0021 \
     -X POST \
     -H "Content-Type: application/json" \
     --data '{"method":"eth_blockNumber","params":[],"id":1,"jsonrpc":"2.0"}' \

docusaurus/docs/operate/run_a_node/appgate_server.md

@@ -1,12 +1,13 @@
 ---
 title: AppGate Server
-sidebar_position: 3
+sidebar_position: 4
 ---
 
 # Run an AppGate Server <!-- omit in toc -->
 
 - [What is AppGate Server?](#what-is-appgate-server)
 - [AppGate Server Operation Requirements](#appgate-server-operation-requirements)
+- [Hardware requirements](#hardware-requirements)
 - [Docker Compose Example](#docker-compose-example)
 - [Kubernetes Example](#kubernetes-example)
 
@@ -29,6 +30,10 @@ It is crucial to deploy a [Full Node](full_node_docker.md) prior to setting up a
 This ensures the necessary infrastructure for blockchain communication is in place.
 :::
 
+## Hardware requirements
+
+Please see the [Hardware Requirements](./hardware_requirements.md#appgate-server--gateway) page.
+
 ## Docker Compose Example
 
 Please refer to the `Deploying an AppGate Server` section in [poktroll-docker-compose-example](https://github.com/pokt-network/poktroll-docker-compose-example#deploying-an-appgate-server)

docusaurus/docs/operate/run_a_node/full_node_cosmovisor.md

@@ -1,41 +1,108 @@
 ---
 title: Full Node - Cosmovisor
-sidebar_position: 1
+sidebar_position: 2
 ---
 
-# Run a Full Node using Cosmovisor <!-- omit in toc -->
+## Run a Full Node using Cosmovisor <!-- omit in toc -->
+
+This document provides instructions on using the official Cosmos SDK [Cosmosvisor](https://docs.cosmos.network/v0.45/run-node/cosmovisor.html) to run a full Pocket Network node.
 
 - [What is a Full Node](#what-is-a-full-node)
 - [What is Cosmovisor](#what-is-cosmovisor)
-- [Setting up Cosmovisor](#setting-up-cosmovisor)
-- [Upgrading with Cosmovisor](#upgrading-with-cosmovisor)
+- [Installation Instructions](#installation-instructions)
+  - [Prerequisites](#prerequisites)
+  - [Installation Steps](#installation-steps)
+- [Useful Command Cheat Sheet](#useful-command-cheat-sheet)
+  - [Check the status of your node](#check-the-status-of-your-node)
+  - [View the logs](#view-the-logs)
+  - [Stop the node](#stop-the-node)
+  - [Start the node](#start-the-node)
+  - [Restart the node](#restart-the-node)
+
+### What is a Full Node
+
+In blockchain networks, a full node retains continuous synchs and updates the latest copy of the ledger. It may either be a pruned full node (the latest data only) or an archival full node (including complete and historical data).
+
+You can visit the [Cosmos SDK documentation](https://docs.cosmos.network/main/user/run-node/run-node) for more information on Full Nodes.
+
+### What is Cosmovisor
+
+[Cosmovisor](https://docs.cosmos.network/main/build/tooling/cosmovisor) is a tool that automates the version management for our blockchain. It allows operators to automatically upgrade their full nodes and validators without downtime and reduce maintenance overhead.
+
+### Installation Instructions
+
+To install and set up a Poktroll Full Node using Cosmovisor, we provide a comprehensive installation script. This script will handle all the necessary steps, including user creation, dependency installation, Cosmovisor and Poktrolld setup, and system configuration.
+
+#### Prerequisites
+
+- A Linux-based system (Debian-based distributions are fully supported, others may work as well)
+- Root or sudo access
+- A dedicated server or a virtual machine (any provider should work, Vultr and Hetzner have been tested)
+
+#### Installation Steps
 
-## What is a Full Node
+1. Download the installation script:
 
-In blockchain networks, a full node retains continuous synchs and updates the latest copy of the
-ledger. It may either be pruned full node (the latest data only) or an archival full node (including
-complete and historical data).
+   ```bash
+   curl -O https://raw.githubusercontent.com/pokt-network/poktroll/main/tools/installer/full-node.sh
+   ```
 
-You can visit the [Cosmos SDK documentation](https://docs.cosmos.network/main/user/run-node/run-node)
-for more information on Full Nodes.
+2. Make the script executable:
 
-## What is Cosmovisor
+   ```bash
+   chmod +x full-node.sh
+   ```
 
-As an alternative to our [Full Node - Docker](./full_node_docker.md) guide, we also provide documentation on how to deploy
-a Full Node using Cosmovisor.
+3. Run the script with sudo privileges:
 
-[Cosmovisor](https://docs.cosmos.network/main/build/tooling/cosmovisor) is a tool that automates the version management
-for our blockchain. It allows operators to automatically upgrade their full nodes and validators without downtime and
-reduce maintenance overhead.
+   ```bash
+   sudo ./full-node.sh
+   ```
 
-:::info
-TODO(@okdas): finish this tutorial as a part of [#526](https://github.com/pokt-network/poktroll/issues/526).
+4. Follow the prompts to provide the necessary information:
+   - Desired username to run poktrolld (`default: poktroll`)
+   - Node moniker (`default: hostname`)
+   - Seeds (`default: fetched` [from the official source](https://github.com/pokt-network/pocket-network-genesis/tree/master/poktrolld))
+   - Chain ID (`default: poktroll-testnet`)
+
+The script will then proceed with the installation and setup process.
+
+### Useful Command Cheat Sheet
+
+After the installation is complete, your Poktroll Full Node should be up and running.
+
+:::tip
+Remember to keep your system updated and monitor your node regularly to ensure its proper functioning and security.
 :::
 
-## Setting up Cosmovisor
+Here are some useful commands for managing your node:
+
+#### Check the status of your node
+
+```bash
+ sudo systemctl status cosmovisor.service
+```
+
+#### View the logs
+
+```bash
+sudo journalctl -u cosmovisor.service -f
+```
+
+#### Stop the node
+
+```bash
+sudo systemctl stop cosmovisor.service
+```
+
+#### Start the node
 
-[Content to be added]
+```bash
+sudo systemctl start cosmovisor.service
+```
 
-## Upgrading with Cosmovisor
+#### Restart the node
 
-[Content to be added]
+```bash
+sudo systemctl restart cosmovisor.service
+```

docusaurus/docs/operate/run_a_node/full_node_docker.md

@@ -1,6 +1,6 @@
 ---
 title: Full Node - Docker
-sidebar_position: 2
+sidebar_position: 3
 ---
 
 # Run a Full Node using Docker <!-- omit in toc -->
@@ -9,6 +9,7 @@ sidebar_position: 2
 - [Roles \& Responsibilities](#roles--responsibilities)
 - [Types of Full Nodes](#types-of-full-nodes)
 - [Pocket Network Full Nodes](#pocket-network-full-nodes)
+- [Hardware requirements](#hardware-requirements)
 - [Docker Compose Example](#docker-compose-example)
 - [Kubernetes Example](#kubernetes-example)
 
@@ -19,6 +20,7 @@ In blockchain networks, a Full Node retains a complete copy of the ledger.
 You can visit the [Cosmos SDK documentation](https://docs.cosmos.network/main/user/run-node/run-node)
 for more information on Full Nodes.
 
+
 ## Roles & Responsibilities
 
 It is usually responsible for:
@@ -47,14 +49,16 @@ nodes needed for off-chain entities like [RelayMiners](./relay_miner.md) and
 [AppGates](./appgate_server.md), which rely on interaction with the Pocket Network
 blockchain for full functionality.
 
-This guide outlines how to configure, deploy nad maintain Full Nodes.
+This guide outlines how to configure, deploy and maintain Full Nodes.
 
-## Docker Compose Example
+## Hardware requirements
 
-Please refer to the `Deploying a Full Node` section in [poktroll-docker-compose-example](https://github.com/pokt-network/poktroll-docker-compose-example#deploying-a-full-node)
-GitHub repository on how to deploy an AppGate Server using `docker-compose`.
+Please see the [Hardware Requirements](./hardware_requirements.md#validator--full-node) page.
+
+## Docker Compose Example
 
-_TODO: Move over the relevant information from the `poktroll-docker-compose-example` repository into the docs_
+Please refer to the `Deploying a Full Node` section in [Docker Compose Walkthrough](../quickstart/docker_compose_walkthrough.md)
+on how to deploy a Full Node using `docker-compose`.
 
 ## Kubernetes Example